SILVERBIRCHCANOES.COM

SILVERBIRCHCANOES.COM

CONTENTS 2 BROADLAND 15 / 16 4 TAPERED FOAM TECHNOLOGY 6 DURALITE 7 DURACORE 8 OUTFITTING OPTIONS 10 COVERT 13 ABOUT US 2015 All rights reserved. Silverbirch is a trading name of Consult Design Create Limited: The Boat House, Bunns Bank Industrial Estate, Attleborough, NR17 1QD, United Kingdom

BROADLAND

Drawing on the classic lines and proven design characteristics of a traditional Prospector canoe, the Broadland is a true all rounder and a real workhorse. We have optimized the chine, camber, and sidewall profile from the original Prospector design to increase both primary and secondary stability making the Broadland a confidence inspiring canoe to paddle. A carefully considered rocker profile, and a symmetrical hull form ensure both the Broadland 15 and 16 paddle well either tandem or solo. PERFECT FOR SOLO OR TANDEM BROADLAND 15: length: 4565mm / 14 11 width at gunwale: 895mm 35.25 max width: 905mm 36 rocker bow & stern: 62mm 2 5 depth bow & stern: 508mm 20.0 depth middle: 357mm 14 BROADLAND 16: length: 4845mm / 15 11 width at gunwale: 922mm 36.25 max width: 934mm 36.75 rocker bow & stern: 62mm 2 5 depth bow & stern: 520mm 20.5 depth middle: 370mm 14.5 3

TAPERED FOAM TECHNOLOGY

A MATERIAL S STIFFNESS IS DIRECTLY PROPORTIONAL TO HOW THICK IT IS. In a three layer canoe the foam core is there to hold the inner and outer skins apart without the added weight of all that plastic being solid, giving you massively boosted stiffness, without a huge increase in weight. THERE IS A SNAG HOWEVER... High wear and high impact points require different properties. In these areas abrasion resistance, impact resistance, and durability are more important than stiffness and to a degree weight. THIS IS WHERE OUR TAPERED FOAM TECHNOLOGY COMES IN. By carefully tuning our oven cycles we have achieved a laminate with a foam layer that tapers to virtually zero thickness at either end of your canoe, whilst being thicker than a standard foam core through the belly of the boat. To balance this we have then made the carefully matched inner and outer skins thicker at either end of the canoe. With the right material in the right places we obviously wring every last drop of excessive weight from the canoe, but with the added benefit of making the canoe more durable too. THE RESULT MAXIMUM STIFFNESS, MAXIMUM DURABILITY, MINIMUM WEIGHT. BROADLAND 5

BROADLAND The outer skin is made with an incredibly stiff and tough whitewater grade plastic the best we can find, the foam has been optimized to have a lower density, giving us a thicker core than that used in Duracore, and the material distribution between the layers has been optimised to make the most of the superior materials. The result? Stiffer, lighter, and yet just as durable! A B C The noticeable weight saving over our Duracore laminate puts many models made with Duralite into close competition with more expensive canoes produced with composite or royalex construction methods. WHITE WATER GRADE HDPE LOW DENSITY FOAM CORE WHITE WATER GRADE HDPE YELLOW ORANGE RED PINK GREEN BLUE BLACK DURALITE COLOUR OPTIONS

DURACORE COLOUR OPTIONS FOREST GREEN CHERRY Duracore is a tough and durable three-layer Polyethylene material. A B C MEDIUM DENSITY POLYETHYLENE Made to last with a tough, high-density outer skin, a closed cell foam core, and a medium density inside skin to help dissipate the energy from impacts. Duracore is made with a tough, UV stable, and abrasion resistant outer skin, and is easily repairable at home should you ever have an accident and damage it. HIGH DENSITY FOAM CORE HIGH DENSITY POLYETHYLENE 7

BROADLAND OUTFITTING OPTIONS Both Duracore and Duralite laminates come with a choice of trim options. Vinyl is fitted as standard, and comes with webbing seats, ash handles and an ash carrying yoke. Beautiful, hand crafted ash gunwales are an optional extra, which really accentuate the Broadland s graceful, sweeping curves. VINYL GUNWALES ASH GUNWALES BROADLAND 15 BROADLAND 16 duracore 36Kg 38.5Kg duralite 31.5Kg 33.5Kg BROADLAND 15 BROADLAND 16 duracore 34.25Kg 36.5Kg duralite 29.5Kg 31.5Kg Our custom vinyl gunwale profile is matched with webbing seats, plastic end plates, and ash handles and carrying yoke to give a durable, low maintainance outfitting option. Every canoe with ash gunwales is hand finished with pride at our Norfolk production facility. After carefully fitting the ash profiles, the gunwales are planed and oiled by hand, and then matched with ash end plates, ash handles and carrying yoke, and webbing bound ash seats. Not only does it give a beautiful, natural finish, but is several kilos lighter than the vinyl alternative. 9

That s exactly what we did with the Covert! In development nothing was off limits and nothing was pre-set we simply sat down in our shaping bay with a blank piece of paper and one simple brief To create the fastest, most manoeuvrable, and most predictable Open Canoe possible. At the core of this philosophy is our stepped rocker profile. The step in the tail ensures a clean release of water from the stern, which not only reduces drag, but also helps to reduce the tendency for the tail to bog down on boily eddy lines or when getting bounced around by large lateral waves. The sidewall profile of the boat is also continually curved. This helps boost secondary stability and is carefully angled to keep the waterline width to a minimum. As the Covert is made just to slide, spin, grind, boof, and surf its way down the river we have searched the globe for the best materials to build it from. Every boat is built in-house by a dedicated team of paddlers, using a custom grade of super tough highdensity polyethylene. specs: length: 282cm / 9.3ft width: 73.5cm / 29.25 depth: 38.1cm / 15 duratough: 23.5kg / 51.5lbs duralite: 21.5kg / 47lbs Rocker: flared bow and stepped stern Outfitting: Factory-installed saddle, deck lines, customization kit supplied. Optimum weight range: 70kg (145lbs) 110kg (240lbs) 11

Team boater Kelvin Horner 23.5kg / 51.5lbs A hard wearing, thickness optimsed single layer shell made with the toughest, impact modified HDPE we can find. Rigorous optimisation of our production process ensures Duratough canoes have the plastic where needed, without wasting an ounce in unnecessary areas. 21.5kg / 47lbs The outer skin is made with an incredibly stiff and tough whitewater grade plastic the best we can find, the foam has been optimized to have a lower density, giving us a thicker core than that used in Duracore, and the material distribution between the layers has been optimised to make the most of the superior materials. *CUSTOM COLOURS AVAILABLE TO ORDER COVERT COLOUR OPTIONS

ABOUT US Every Silverbirch canoe is drawn and faired at full size using traditional wooden batterns.these graceful lines are then scanned at full size and imported into CAD, where we use them to build highly accurate 3D models of the finished canoe. This fusion of techniques allows us to develop designs with the speed, efficiency, and accuracy of CAD modeling whilst still retaining all the benefits of traditional, time honored craftmanship. Every canoe is made in our own purpose built production facility in Norfolk by skilled craftsman. Our industry leading quality control system digitally records every aspect of a canoe s production and testing process, ensuring consistent quality and full traceability of materials. PROUDLEY DESIGNED AND MADE IN THE UK All new designs undergo a rigorous testing and set up process before production begins. We optimize plastic distribution to ensure boats are as durable and light as possible, and tune the cook cycle to ensure the polymer is perfectly cured. Every production canoe is then tested at QC for peace of mind. 13

SILVERBIRCHCANOES.COM +44 (0)1953 455666