CYLINDERS FOR USE WITH SCOTT SAFETY SELF-CONTAINED BREATHING APPARATUS
SCOTT SAFETY CYLINDERS Over the years, breathing air cylinders have been providing SCBA users with a supply of fresh air. The original cylinders were made of steel and quite heavy. But today, advances in technology have enabled cylinders to become much lighter and less burdensome to the SCBA wearer. Scott offers a complete assortment of cylinders to meet the needs and demands of all SCBA users aluminum cylinders for infrequently used SCBA to carbon-wrapped cylinders for daily use. In addition, Scott Safety offers cylinders in 30', 45', 60' and 75' durations (a Scott Safety exclusive). 5.5 CYLINDERS: INTRODUCING THE LIGHTEST AND SMALLEST CYLINDERS USED ON SELF-CONTAINED BREATHING APPARATUS The best way to understand the needs of Air-Pak SCBA users is to simply listen. Scott Safety did just that by visiting SCBA users from across North America. The participants included fire chiefs, SCBA technicians, safety officers and firefighters. It was not exclusive to the fire service as representatives from the military, general industry and law enforcement were also included. The overwhelming attribute that users requested was a reduction in weight followed closely by a reduction in profile. The engineers of Scott Safety determined the best manner to accomplish this was to increase the pressure of the cylinders to 5500 psig, which created the new 5.5 cylinders. The result is a cylinder that has more than a 10% reduction in weight and profile in a traditional form familiar to SCBA users. Another benefit to the 5.5 cylinder offering is the ease of integration into your department without the need of costly infrastructure changes. Scott Safety has worked with leading Truck Seat and SCBA Bracket manufacturers to ensure these products work with the existing products in the market. The construction continues to be an aluminum liner wrapped with layers of carbon fibers and fiberglass all sealed with a protective epoxy resin coating which makes the cylinder easier to clean. The 5.5 cylinders are available in 30' 45', 60' and new 75' durations. The overall result is a lighter Air-Pak SCBA that reduces fatigue of the wearer, increases productivity and decreases injuries.
CYLINDER OFFERINGS ALUMINUM CYLNDERS Scott Safety s Aluminum cylinders are built to the Department of Transportation (DOT) and Transport Canada (TC) specifications 2216 psig working pressure Rated for 30-minute duration based on NIOSH breathing rates Hydrostatic testing to be performed every five years Unlimited life expectancy CARBON CYLINDERS Scott Safety s Carbon Cylinders are built to DOT and TC specifications 2216, 3000, 4500 and new 5500 psig working pressures Lightweight, composite cylinder consisting of an aluminum alloy inner shell with a total overwrap of carbon fiber, fiberglass and an epoxy resin Rated for 30', 45', 60' and 75' (5.5 only) durations based on NIOSH breathing rates 75' cylinder is ideal for RIT and extended duration operations Hydrostatic testing to be performed every five years 15-year life expectancy ST7 TOUGH CYLINDERS Scott Safety s ST7 Tough Cylinders are built to DOT and TC specifications Built extremely tough and durable Provides added protection against abrasion and abuse 4500 psig working pressure Rated for 45' duration based on NIOSH breathing rate Designed for the most demanding fire ground operations Hydrostatic testing to be performed every five years 15-year life expectancy CYLINDER ACCESSORY ITEMS: CUSTOM LOGO CYLINDER BANDS Scott Safety offers its customers the ability to customize their new carbon cylinders by adding a personalized logo. This custom logo is printed on luminescent paper and protected by the fiberglass wrap and epoxy resin. Greater visibility Easy-to-read and see luminescent band Reduces cylinders being misplaced in mutual aid scenarios Twenty-five cylinder minimum order CYLINDER VALVES CGA THREADED CYLINDERS ACS CYLINDERS NxG SNAP-CHANGE CYLINDERS
At Scott, we ve been protecting firefighters for more than half a century. Beginning with company founder Earl Scott, the Scott name has stood for unquestioned quality when safety is critical. Firefighters around the world and others across hundreds of industries rely on Scott Safety s attention to detail, fail-safe measures, attentive service and innovation. The 5.5 is another offering in our long, proud history of safety equipment. CYLINDER SPECIFICATIONS CGA Threaded Cylinders Description Duration Capacity Dimensions Weight Part Number Pressure Minutes (at 40 lpm) Liters SCF H 2 0 (in 3 ) Length in inches (less valve) Length in inches (with valve) Diameter in inches With Valve (empty) With Valve (full) Aluminum 804101-01 2216 30 1274 45 523 20.9 24.0 6.75 17.50 20.86 Carbon-Wrapped 804840-01 2216 30 1274 45 523 20.6 23.7 6.70 7.85 11.21 805044-01 3000 30 1756 62 521 20.9 24.0 6.83 10.45 15.08 804721-01 4500 30 1274 45 285 18.6 21.7 5.53 7.65 11.01 804722-01 4500 45 1841 65 418 20.4 23.5 6.30 9.75 14.61 804722-01A 4500 45 1841 65 416 18.2 21.3 6.84 10.35 15.39 804723-01 4500 60 2464 87 550 21.7 24.8 7.05 12.20 18.92 200930-01 5500 30 1274 45 233 19.1 22.2 4.94 6.72 10.08 200969-01 5500 45 1841 66 349 19.1 22.2 6.00 8.92 13.96 200972-01 5500 60 2464 87 465 21.4 24.5 6.53 10.97 17.69 200975-01 5500 75 3115 111 581 22.4 25.5 7.15 13.47 21.88 Carbon-Wrapped ST7 804722-11 4500 45 1841 65 418 20.4 23.5 6.30 10.25 15.29 NxG Snap-Change Carbon-Wrapped Cylinders Description Duration Capacity Dimensions Weight Part Number Pressure Minutes (at 40 lpm) Liters SCF H 2 0 (in 3 ) Length in inches (less valve) Length in inches (with valve) Diameter in inches With Valve (empty) With Valve (full) 200131-01 2216 30 1274 45 523 20.6 23.7 6.70 8.14 11.50 200128-01 4500 30 1274 45 285 18.6 21.7 5.53 7.94 11.30 200129-01 4500 45 1841 65 418 20.4 23.5 6.30 10.04 15.08 200129-01A 4500 45 1841 65 416 18.2 21.3 6.84 10.64 15.50 200130-01 4500 60 2464 87 550 21.7 24.8 7.05 12.49 19.21 200967-01 5500 30 1274 45 233 19.1 22.2 4.94 7.13 10.49 200970-01 5500 45 1841 66 349 19.1 22.2 6.00 9.33 14.37 200973-01 5500 60 2464 87 465 21.4 24.5 6.53 11.38 18.10 200976-01 5500 75 3115 111 581 22.4 25.5 7.15 13.87 22.28 ACS Cylinders Description Duration Capacity Dimensions Weight Part Number Pressure Minutes (at 40 lpm) Liters SCF H 2 0 (in 3 ) Length in inches (less valve) Length in inches (with valve) Diameter in inches With Valve (empty) With Valve (full) Aluminum 200874-01 2216 30 1274 45 523 20.9 24.0 6.75 17.50 20.86 Carbon-Wrapped 200873-01 2216 30 1274 45 523 20.6 20.9 6.70 7.85 11.21 200870-01 4500 30 1274 45 285 18.6 21.7 5.53 7.65 11.01 200871-01 4500 45 1841 65 418 20.4 23.5 6.30 9.75 14.79 200872-01 4500 60 2464 87 550 21.7 24.8 7.05 12.20 18.92 To learn more, call your Scott regional manager or authorized distributor. 2012 Scott Safety. SCOTT, the SCOTT SAFETY Logo, Scott Health and Safety and Air-Pak are registered and/or unregistered marks of Scott Technologies, Inc. or its affiliates. Monroe Corporate Center P.O. Box 569 Monroe, NC 28111 Telephone: 800.247.7257 Facsimile: 704.291.8330 www.scottsafety.com sh-sale@tycoint.com H/S 7012 3/12 ISO 9001 Registered. All rights reserved.
Face Masks SELF CONTAINED BREATHING APPARATUS
FM-1 PANASEAL/PANAVISOR LQF FACE MASK 5.1 PanaSeal Positive Pressure Face Mask: Black Neoprene Part/Article Nos: Various Blue Silicone - Part/Article Nos: Various PanaVisor Positive Pressure Face Mask, Black Neoprene - Part/Article Nos:071.780.00 1033257 Blue Silicone - Part/Article Nos:071.781.00 1033272 Item Article Part No. Description 1 1031708 071.102.99 Visor (coated) and Visorguard 1031701 071.102.92 Visor (uncoated) and Visorguard 1031836 071.127.00 VisorGuard 1031933 071.151.99 Clear visor covers spares pack (20) 2 1031718 071.105.99 Clamps and screws for visor 3. 1021482 030.080.99 Screws, front cover, spares pack (5) 4 1032238 071.253.99 Front cover and screws, spares pack 5 1027929 054.066.99 O-ring, exhale valve, spares pack (5) 6 1032114 071.213.99 Exhale valve c/w O-ring 7 1027933 054.067.99 O-ring, speech diaphragm, spares pack (5) 8 1032098 071.211.99 Speech diaphragm c/w O-ring 9 1031734 071.114.29 Inner mask valve flaps, spares pack (6) 10a 1031744 071.115.98 Inner mask valve pins, spares pack (6) (Neoprene masks) 10b 1031727 071.110.99 Inner mask valve frame, spares pack (2) (Silicone masks) 11 1032063 071.203.99 Inner mask clamp plate 12 1021457 030.065.99 Screws, clamp plate, spares pack (5) 13 1032460 071.314.99 Front fitting assembly, Neoprene, c/w speech diaphragm, inner mask, exhale valve, front cover & screws 071.351.99 Front fitting assembly, silicone, c/w speech diaphragm, inner mask, exhale valve, front cover & screws 14 1017792 014.038.97 Front fitting clamp, spares pack (5) 15 1032412 071.303.99 Outer mask assembly, Neoprene, c/w visor, clamps, side fitting, deflector & Visorguard 071.352.99 Outer mask assembly, silicone, c/w visor, clamps, side fitting, deflector & Visorguard 1031983 071.200.01 Outer mask only,neoprene 1031991 071.200.09 Outer mask only, silicone 16 1017794 014.038.99 Side fitting clamp, spares pack (5) 17 1032379 071.298.99 Side fitting including deflector 18 1032334 071.270.99 Head harness button, spares pack (7) 19 1031835 071.126.99 Neck strap assembly (not used on 071.304.01) 20 1017260 008.017.99 Head harness buckles, spares pack (5) 21a 1031782 071.120.98 Head harness, Neoprene 21b 1032685 071.441.98 Head harness, elastic (Escape masks only) 22 1032384 071.299.99 Deflector for side fitting 23a 1032043 071.201.95 Inner mask, silicone, c/w valve flaps and pins (not indicated) 23b 1032046 071.201.99 Inner mask, Neoprene, c/w valve flaps and pins (not indicated) 24 1032397 071.302.99 Support for front fitting, spares pack (5) 25 Part of item 13 Front fitting FM-1 (Page 10) Iss. G JAN. 99
PANASEAL/PANAVISOR LQF FACE MASK FM-1 1 20 21a 18 2a 2 19 24 23b 9 10b 11 14 12 16 17 22 2 5 25 7 8 23a 9 10a 15 21b 3 6 13 4 Iss. G JAN. 99 FM-1 (Page 11)
FM-1 PANASEAL/PANAVISOR LQF FACE MASK 5.2 PanaSeal PP LQF Face Mask, Net Head Harness: Black Neoprene - Part/Article Nos: Various Blue Silicone - Part/Article Nos: Various PanaVisor PP LQF Face Mask, Net Head Harness: Black Neoprene - Part/Article Nos: Various Blue Silicone - Part/Article Nos: Various Item Article Part No. Description 1 1031708 071.102.99 Visor (coated) and Visorguard 1031701 071.102.92 Visor (uncoated) and Visorguard 1031836 071.127.00 VisorGuard 1031931 071.151.99 Clear visor covers spares pack (20) 2 1031718 071.105.99 Clamps and screws for visor 3. 1021482 030.080.99 Screws, front cover, spares pack (3) 4 1032238 071.253.99 Front cover and screws, spares pack 5 1027929 054.066.99 O-ring, exhale valve, spares pack (5) 6 1032114 071.213.99 Exhale valve c/w O-ring 7 1027933 054.067.99 O-ring, speech diaphragm, spares pack (5) 8 1032098 071.211.99 Speech diaphragm c/w O-ring 9 1031734 071.114.29 Inner mask valve flaps, spares pack (6) 10a 1031744 071.115.98 Inner mask valve pins, spares pack (6) (Neoprene masks) 10b 1031727 071.110.99 Inner mask valve frame, spares pack (2) (Silicone masks) 11 1032063 071.203.99 Inner mask clamp plate 12 1021457 030.065.99 Screws, clamp plate, spares pack (5) 13 1032460 071.314.99 Front fitting assembly, Neoprene, c/w speech diaphragm, inner mask, exhale valve, front cover & screws 071.351.99 Front fitting assembly, silicone, c/w speech diaphragm, inner mask, exhale valve, front cover & screws 14 1017792 014.038.97 Front fitting clamp, spares pack (5) 15 1032412 071.303.99 Outer mask assembly, Neoprene, c/w visor, clamps, side fitting, deflector & Visorguard 071.352.99 Outer mask assembly, silicone, c/w visor, clamps, side fitting, deflector & Visorguard 1031983 071.200.01 Outer mask only,neoprene 1031991 071.200.09 Outer mask only, silicone 16 1017794 014.038.99 Side fitting clamp, spares pack (5) 17 1032379 071.298.99 Side fitting including deflector 18 1032334 071.270.99 Head harness button, spares pack (7) 19 1031835 071.126.99 Neck strap assembly (not used on 071.304.01) 20 1017260 008.017.99 Head harness buckles, spares pack (5) 21c 1033315 071.793.99 Head harness, polyester net 1033314 071.793.98 Head harness, Kevlar net 22 1032384 071.299.99 Deflector for side fitting 23a 1032043 071.201.95 Inner mask, silicone, c/w valve flaps and pins (not indicated) 23b 1032046 071.201.99 Inner mask, Neoprene, c/w valve flaps and pins (not indicated) 24 1032397 071.302.99 Support for front fitting, spares pack (5) 25 Part of item 13 Front fitting FM-1 (Page 12) Iss. G JAN. 99
PANASEAL/PANAVISOR LQF FACE MASK FM-1 1 21c 18 2 24 22 19 20 23b 9 10b 5 25 7 8 23a 11 10a 9 14 12 16 15 17 2 3 6 13 4 Iss. G JAN. 99 FM-1 (Page 13)
FM-1 PANASEAL/PANAVISOR LQF FACE MASK 5.3 Face Masks for use with Gallet and Rosenbauer Helmets PanaSeal Gallet PP:Black Neoprene - Part/Article Nos:071.304.02 1032415 Blue Silicone Part/Article Nos:071.350.03 1032556 PanaVisor Gallet PP Neoprene Part/Article Nos:071.780.04 1033261 PanaVisor Rosenbauer PP Neoprene Part/Article Nos:071.780.03 1033260 Item Article Part No. Description 1 1031708 071.102.99 Visor (coated) and Visorguard 1031701 071.102.92 Visor (uncoated) and Visorguard 1031836 071.127.00 VisorGuard 1031933 071.151.99 Clear visor covers spares pack (20) 2 1031710 071.105.99 Visor clamps and screws 3. 1021482 030.080.99 Screws, front cover, spares pack (5) 4 1032238 071.253.99 Front cover and screws, spares pack 1032059 071.202.98 Front cover plate 071.253.96 Removable front cover kit (Replaces item 4) 071.253.96 Front cover kit for comms microphone (Replaces item 4) 5 1027929 054.066.99 O-ring, exhale valve, spares pack (5) 6 1032114 071.213.99 Exhale valve c/w O-ring 7 1027933 054.067.99 O-ring, speech diaphragm, spares pack (5) 8 1032098 071.211.99 Speech diaphragm c/w O-ring 9 1031734 071.114.29 Inner mask valve flaps, spares pack (6) 10a 1031744 071.115.98 Inner mask valve pins, spares pack (6) (Neoprene masks) 10b 1031727 071.110.99 Inner mask valve frame, spares pack (2) (Silicone masks) 11 1032063 071.203.99 Inner mask clamp plate 12 1021457 030.065.99 Screws, clamp plate, spares pack (5) 13 1032460 071.314.99 Front fitting assembly, Neoprene, c/w speech diaphragm, inner mask, exhale valve, front cover & screws 071.351.99 Front fitting assembly, silicone, c/w speech diaphragm, inner mask, exhale valve, front cover & screws 14 1017792 014.038.97 Front fitting clamp, spares pack (5) 15 1032409 071.303.94 Outer mask assembly, PanaSeal Gallet, Neoprene, c/w visor, clamps, side fitting, deflector & Visorguard 071.352.98 Outer mask assembly, PanaSeal Gallet, silicone, c/w visor, clamps, side fitting, deflector & Visorguard 071.782.97 Outer mask assembly, PanaVisor Gallet, Neoprene, c/w visor, clamps, side fitting, deflector & Visorguard 071.782.96 Outer mask assembly, PanaVisor Rosenbauer, Neoprene, c/w visor, clamps, side fitting, deflector & Visorguard 1032017 071.200.35 Outer mask PanaSeal Gallet only,neoprene 1032012 071.200.30 Outer mask PanaSeal Gallet only, silicone 16 1017794 014.038.99 Side fitting clamp, spares pack (5) 17 1032379 071.298.99 Side fitting including deflector 18-20 Not Used 21d 1033000 071.645.99 Gallet helmet clamp, c/w neck strap 21e 1033247 071.770.99 Rosenbauer helmet clamp, c/w neck strap 22 1032384 071.299.99 Deflector for side fitting 23a 1032043 071.201.95 Inner mask, Silicone c/w valve flaps and pins (not indicated) 23b 1032046 071.201.99 Inner mask, Neoprene,, c/w valve flaps and pins (not indicated) 24 1032397 071.302.99 Support for front fitting, spares pack (5) 25 Part of item 13 Front fitting FM-1 (Page 14) Iss. G JAN. 99
PANASEAL/PANAVISOR LQF FACE MASK FM-1 1 2 21d 24 9 10b 16 22 2 23b 11 12 14 17 7 9 23a 10a 15 5 25 8 3 4 6 13 21e Iss. G JAN. 99 FM-1 (Page 15)
FM-3 VISION 3 5. ASSEMBLY DIAGRAM & PARTS LIST Vision 3 LQF Positive Pressure Facemask Part/Article Nos: 071.846.00 1033408 Vision 3 RQF Positive Pressure Facemask Part/Article Nos: 071.846.00 1033408 Vision 3 LQF/40mm Positive Pressure Facemask Part/Article Nos: 071.846.00 1033408 Item Article Part No. Description 1 1021425 030.040.99 Screws spares pack (5) screws 2 1033166 071.727.99 Front cover assembly 3a 1033172 071.730.99 Visor LQF coated assembly 3b 1033401 071.839.99 Visor RQF coated assembly 3c 1033390 071.834.99 Visor LQF/RAS coated assembly 4 071.213.95 Exhale valve c/w O-ring 5 1028183 054.235.99 O-ring (Pack of of 5) 6 1033085 071.695.99 Front fitting 7 1028183 054.235.99 O-ring (Pack of of 5) 8 071.211.95 Speech diaphragm c/w O-ring 9 1027933 054.067.99 O-ring, speech diaphragm (Pack of 5) 10 1033079 071.694.99 Speech diaphragm retainer 11 1033101 071.702.99 Face seal 12 1033123 071.707.90 Buckle and roller (Pack of 5) 13a 1033109 071.704.99 Web head harness 13b 1033400 071.838.99 Net head harness, Polyester 1073300 071.838.98 Net head harness, Nomex 14 1033220 071.751.99 Stirup, rubber link and button 15 1033138 071.712.99 Inner mask c/w inhale valves 16 1031734 071.114.29 Inhale valve flaps (Pack of 6) 17 1033128 071.708.99 Hinge (Pack of 3 hinges and 2 lower hinges) 18 1033133 071.710.99 Clamps and screws for visor, spares kit 19 1033178 071.733.99 Neckstrap, mount and pin 20 1033128 071.708.99 Hinge, lower FM-3 (Page 10) Iss. B JAN. 99
VISION 3 FM-3 18 17 A 14 3c 15 3b 21 10 16 13a 9 11 12 5 7 4 6 8 13b 1 3a A 19 2 20 12 Iss. B JAN. 99 FM-3 (Page 11)
PROPAK-SIGMA HIGH PERFORMANCE, RUGGED DEPENDABILITY, TRUSTED TECHNOLOGY The ProPak-Sigma has been designed specifically for use as a compliance set in Marine or Industrial fire fighting environments. The entire ProPak range has been approved to EN137:2006 Type 2, incorporating the stringent Full Flame Engulfment Test, and to the 9th amendment of the MED meaning that it has the latest approval for the Marine market. PRODUCT HIGHLIGHTS EN137:2006 Type 2 MED Approved Breathing Apparatus Compliance set for Marine and Industrial firefighting environments Rigid backframe construction Easily removable pneumatics Simple to service and maintain
PROPAK-SIGMA SELF CONTAINED BREATHING APPARATUS Quick pull forward action allows easy in-transit adjustment of shoulder strap Adjustable shoulder straps Kevlar blend wrap around harness Waistband featuring large buckles for easy operation with gloved hands and fast donning and doffing MAJOR COMPONENTS Compact positive pressure demand valve featuring servo-assisted, tilting diaphragm mechanism with low inspiratory resistance and responsive dynamic performance, automatic first breath actuation and hands free bypass facility REDUCING VALVE First stage pressure reducing valve featuring non-adjustable, spring loaded piston mechanism and outlet supply protected by pressure relief valve HOSES Stainless steel swivel hose fittings Medium pressure hose High pressure hose Medium working pressure 16 bar Minimum burst pressure 80 bar Maximum working pressure 450 bar Minimum burst pressure 800 bar PRESSURE INDICATOR & WARNING WHISTLE Bourdon tube type dial indicator Heat and Impact resistant polycarbonate lens COMMUNICATIONS The Sabrecom2 is a radio communication interface designed for use with Scott Safety s range of positive pressure full facemasks. Fully integrated and ready to use the Sabrecom 2 is approved to EN136 class 3, meeting the stringent flame and radiant heat test requirements. OPTIONS The Scott Safety ProPak-Sigma can be specified in many configurations including Duo, Split Demand Valve Coupling (SDC), Y Piece (Y2C) and attachments for Airline, which can be used for Rescue Second Man and Decontamination. Product Specifications Weight Single Configuration (less cylinder) Single Configuration and facemask (less cylinder) Dimensions Length Width Depth (with a 6 litre 200 bar cylinder) 2.6kg 3.2kg 630mm 285mm 215mm Ordering Information Part Number Description Application ProPak-Sigma EN137 Approved, Type 2 Marine / Industrial Fire Fighting Scott Safety is a global business unit of Tyco International that supplies a variety of industries through manufacturing facilities located in the United States, United Kingdom, Asia, Finland and Australia. Pimbo Road Skelmersdale Lancashire England WN8 9RA Telephone: +44 (0) 1695 711711 Fax: +44 (0) 1695 711772 www.scottsafety.com scott.sales.uk@tycoint.com 2012 Scott Safety. SCOTT, the SCOTT SAFETY Logo, Scott Health and Safety, AFU are registered and/or unregistered marks of Scott Technologies, Inc. or its affiliates.
TECHNICAL DATASHEET PROPAK-SIGMA SELF CONTAINED BREATHING APPARATUS DESCRIPTION The Scott Safety ProPak Sigma is atype 2 open circuit, self-contained, compressed air breathing apparatus. It consists of a back plate, unpadded carrying harness and pneumatic system, containing a cylinder connector, reducer, pressure gauge, whistle and demand valve. The ProPak Sigma can be configured in a number of different ways with various size single cylinders. There are also a range of variants available including Airline (AC), Split Demand Valve Coupling (SDC) and Y Piece configurations (Y2C). The ProPak Sigma is used in conjunction with a range of composite or steel cylinders and the choice of Vision 3, or Promask PP facemask. APPLICATIONS The ProPak Sigma is specifically designed as a Marine / Industrial Fire-fighting SCBA, but is also suitable for providing respiratory protection in any IDLH environment. APPROVALS CE marked in accordance with EN137:2006: Type 2 AS1716 MED (Shipswheel)
TECHNICAL DATASHEET MATERIALS Pressure Reducing Valve Rust Tube (Cyls) Reducing Valve Seat O-Rings Reducing Valve Springs HP Pressure Gauge HP Pressure Gauge Cover MP Air Supply Hose Fittings Facemask Facemask Visor MP Air Supply Hose HP Air Hose Valve Handwheel Harness Backplate Backpad Cylinder Band Strap Buckles Cylinder Cylinder Valve Demand Valve Casing Nickel Plated Brass Brass Polyamide (Nylon) Nitrile, Silicone, EPDM Stainless Steel Stainless Steel, Polycarbonate Lens Neoprene Nickel Plated Brass Neoprene, Silicone or Procomp Polycarbonate EPDM Cover, fabric braid reinforcement, EPDM liner PTCFE liner, stainless steel braiding, Estane sleeve Glass filled Polyamide/ TPE Kevlar Blend Webbing Glass & Carbon filled Nylon composite Flame retardant cross linked polyolefin closed cell foam covered in a Proban fabric Kevlar blend webbing with Velcro Glass filled polyamide Steel or Composite Nickel Plated Brass Glass filled Polyamide MAINTENANCE/CLEANING/SERVICING N.B. - Cleaning should only be carried out as specified in the user instructions. Maintenance and servicing must only be performed by trained personnel following the procedures in the Service and Maintenance manual.
TECHNICAL DATASHEET TECHNICAL SPECIFICATIONS Tempest Demand Valve Compact positive pressure demand valve featuring servo-assisted, tilting diaphragm mechanism with low inspiratory resistance and responsive dynamic performance, automatic first breath actuation and hands free bypass facility. Components injection moulded from Polyamide and Acetyl with rubber seals and diaphragms. First breath activation Peak flow performance Bypass flow Static positive pressure Reducing Valve -20 to -30 mbar In excess of 1000 litres/minute 150 litres/minute nominal 1.0 4.0 mbar First stage pressure reducing valve featuring non-adjustable, spring loaded piston mechanism and outlet supply protected by pressure relief valve. Valve body and cap machined from nickel-plated brass with stainless steel spring and hose retainer Uclips. Outlet Pressure 200 bar inlet 5.5 to 9.5 bar 300 bar inlet 6.0 to 11.0 bar Pressure relief valve protected Flow restrictor to gauge supply hose Pressure Indicator & Warning Whistle Bourdon tube type dial indicator Heat and impact resistant Polycarbonate lens Safety blow-out vent in rear of gauge Accuracy Hoses Stainless Steel swivel hose fittings Medium Pressure Hose Maximum working pressure Minimum burst pressure High Pressure hose Maximum working pressure Minimum burst pressure Weight/ Dimensions Single configuration (less cylinder) Single configuration & facemask (less cylinder) Length Width Depth (with 6.0 litre 200 bar cylinder) Approx. 13.5 bar <25 litres minute +/- 10 bar between 40-300 bar 16 bar 80 bar 450 bar 800 bar 2.6kg 3.2kg 630mm 285mm 215mm
TECHNICAL DATASHEET SCBA TRANSPORT CASE DESCRIPTION Carrying case to hold one breathing apparatus set complete with face mask and cylinder. Features internal insert to hold the apparatus, internal securing strap, sealing gasket, carrying handle and double latch fasteners.
TECHNICAL DATASHEET TECHNICAL SPECIFICATIONS 2014810 Body Gasket Strap Dimensions Weight Moulded HDPE (High Density Polyethylene) Closed cell foam Polyester with Velcro Approx 700 x 460 x 300 mm 6.7kg ORDERING INFORMATION PART NUMBER DESCRIPTION 2014810 SCBA Moulded Carry Case MAINTENANCE/CLEANING The cleaning should only be carried out as specified in the user instructions. STORAGE The SCBA moulded case should be stored in a clean dry environment away from direct heat and sunlight. Storage temperature should not exceed -10 C to +40 C. DISPOSAL Decontaminated equipment and accessories should be dismantled and disposed of as solid waste. Australia: Scott Safety* PO Box 876, Guildford, NSW 2161, Australia Phone: 131 772 Fax: 1800 651 772 Email: scott.sales.anz@tycoint.com New Zealand: Scott Safety Private Bag 93011, New Lynn, Auckland, New Zealand Phone: (64 9) 826 1716 Fax: (64 9) 827 2288 Email: scott.sales.anz@tycoint.com Website www.scottsafety.com * Scott Safety is a division of Rindin Enterprises Pty Limited ACN 089 330 914