122 K FILLS & TNK VNTS Standard eck Fills construction Flush profile ap retention cable olor coded graphics Pop-out eck Fills construction Flush profile No key needed olor coded graphics ap retention cable vailable with security key locking overed eck Fills construction Low profile design over conceals mounting hardware olor coded graphics ap retention cable Vented eck Fills vailable in 316 stainless steel or nylon body with stainless steel cap combination Innovative design requires a single mounting hole ap retention cable No need for external vent Flush Tank Vents Low profile tank vent with an attractive design Removable cap allows for easy tank pressure test vailable with straight or 90 degree angle vailable with stainless steel or nylon mounting hardware Tank vent accessory available for a quick 90 degree turn nvironmental eck Fills construction Flush profile Lockable version Provides a seal to minimise vapour emissions Retained filling cap eck Fills and Tank Vents accessories The following table provides an overview of all replacement parts for eck Fills and Tank Vents offered Part Number M7-27-8807201-2 M7-27-8907208-2 M7-27-8807201-1 M7-27-8907208-1 M7-27-9106901-4 M7-27-8407018- M7-27-8407019-K escription Replacement cap for 1.5" locking (pop-out) Replacement cap for 2" locking (pop-out) Replacement cap for 1.5" regular (pop-out) Replacement cap for 2" regular (pop-out) Replacement washer, screw, clip and cable Replacement cap and cable (standard) Replacement standard deck fill key imensions in millimeters (inch) unless otherwise stated
123 K FILLS & TNK VNTS nvironmental eck Fills Features a captive hinge cap with rubber seal for minimal vapour emissions Order self-adhesive engraved badges separately 2-1/8 installation hole required for the 2 fill 1 7/8 installation hole required for the 1 1/2 fill Locking & non-locking versions available Part No mm ngle Locking mm mm mm M7-24-15-10-8 38 (1 1/2 ) 0 0 No M7-24-15-20-8 38 (1 1/2 ) 0 0 Yes M7-24-15-13-8 38 (1 1/2 ) 30 0 No 84 (3 5/16 ) 50 (2 ) 84 (3 5/16 ) M7-24-15-23-8 38 (1 1/2 ) 30 0 Yes M7-24-20-10-8 50 (2 ) 0 0 No M7-24-20-20-8 50 (2 ) 0 0 Yes M7-24-20-13-8 50 (2 ) 30 0 No 102 (3 5/16 ) 50 (2 ) 84 (3 5/16 ) M7-24-20-23-8 50 (2 ) 30 0 Yes nvironmental eck Fill adges Self adhesive stainless steel badges Suits all environmental deck fills International symbol and engraved lettering Part number includes a strip of 10 badges adge Part Number M7-24-00-01-8 Gas M7-24-00-04-8 Petrol M7-24-00-02-8 iesel M7-24-00-05-8 Water M7-24-00-03-8 Fuel M7-24-00-06-8 Waste Standard eck Fills Features a spring loaded stainless steel cap retention cable olor-coded international symbol with engraved lettering 1-7/8 installation hole required for the 1-1/2 fill 2-1/8 installation hole required for the 2 fill Part No Model mm mm mm mm ngle M7-21-8407016 Water 38 (1 1/2 ) 76 (3 ) 45 (1 3/4 ) 74 (3 ) M7-21-8407017 Waste 38 (1 1/2 ) 76 (3 ) 45 (1 3/4 ) 74 (3 ) M7-21-8407018 Gas 38 (1 1/2 ) 76 (3 ) 45 (1 3/4 ) 74 (3 ) M7-21-8407019 iesel 38 (1 1/2 ) 76 (3 ) 45 (1 3/4 ) 74 (3 ) M7-21-8407020 Fuel 38 (1 1/2 ) 76 (3 ) 45 (1 3/4 ) 74 (3 ) M7-21-8907216 Gas 50 (2 ) 76 (3 ) 54 (2 1/8 ) 84 (3 5/16 ) M7-21-8907217 iesel 50 (2 ) 76 (3 ) 54 (2 1/8 ) 84 (3 5/16 ) M7-21-9007219 Water 38 (1 1/2 ) 90 (3 9/16 ) 45 (1 3/4 ) 74 (3 ) M7-21-9007220 Waste 38 (1 1/2 ) 90 (3 9/16 ) 45 (1 3/4 ) 74 (3 ) M7-21-9007221 Gas 38 (1 1/2 ) 90 (3 9/16 ) 45 (1 3/4 ) 74 (3 ) M7-21-9206429 iesel 38 (1 1/2 ) 90 (3 9/16 ) 45 (1 3/4 ) 74 (3 ) M7-21-9007222 Fuel 38 (1 1/2 ) 90 (3 9/16 ) 45 (1 3/4 ) 74 (3 ) M7-21-9007252 Gas 50 (2 ) 102 (4 ) 54 (2 1/8 ) 84 (3 5/16 ) M7-21-9007253 iesel 50 (2 ) 102 (4 ) 54 (2 1/8 ) 84 (3 5/16 ) M7-21-8407019-K Key Only 0 0 30 0 imensions in millimeters (inch) unless otherwise stated
124 K FILLS & TNK VNTS POP-OUT K FILL Pop-out center on cap for easy keyless operation vailable with keyed or standard cap Features a spring loaded stainless steel cap retention cable olor-coded international symbol with engraved lettering 1-7/8 installation hole required for the 1-1/2 fill 2-1/8 installation hole required for the 2 fill Part No Model mm mm mm mm M7-22-8807201 Water 38 (1 1/2 ) 76 (3 ) 45 (1 3/4 ) 76 (3 ) M7-22-8807202 Waste 38 (1 1/2 ) 76 (3 ) 45 (1 3/4 ) 76 (3 ) M7-22-8807203 Gas 38 (1 1/2 ) 76 (3 ) 45 (1 3/4 ) 76 (3 ) M7-22-8807204 iesel 38 (1 1/2 ) 76 (3 ) 45 (1 3/4 ) 76 (3 ) M7-22-8907210 Gas 50 (2 ) 76 (3 ) 54 (2 1/8 ) 84 (3 5/16 ) M7-22-8907211 iesel 50 (2 ) 76 (3 ) 54 (2 1/8 ) 84 (3 5/16 ) For keyed cap option add -L after the part number FULL OVR K FILL ll stainless steel construction. Features an easy grip cap with simple adjustment of orientation after final installation Features a spring loaded stainless steel cap retention cable 1-7/8 single installation hole is required, 5/8 vented barb Part No Model mm mm mm mm ngle M7-23-9106901 Water 38 (1 1/2 ) 110.7 (4 3/8 ) 79.5 (3 1/8 ) 12.5 (1/2 ) 30 0 M7-23-9106902 Waste 38 (1 1/2 ) 110.7 (4 3/8 ) 79.5 (3 1/8 ) 12.5 (1/2 ) 30 0 M7-23-9106903 Gas 38 (1 1/2 ) 110.7 (4 3/8 ) 79.5 (3 1/8 ) 12.5 (1/2 ) 30 0 M7-23-9106909 Gas 50 (2 ) 123 (4 7/8 ) 79.5 (3 1/8 ) 12.5 (1/2 ) 30 0 M7-23-9206701 Water 38 (1 1/2 ) 98 (3 7/8 ) 79.5 (3 1/8 ) 12.5 (1/2 ) - M7-23-9206702 Waste 38 (1 1/2 ) 98 (3 7/8 ) 79.5 (3 1/8 ) 12.5 (1/2 ) - M7-23-9206703 Gas 38 (1 1/2 ) 98 (3 7/8 ) 79.5 (3 1/8 ) 12.5 (1/2 ) - M7-23-9206704 iesel 38 (1 1/2 ) 98 (3 7/8 ) 79.5 (3 1/8 ) 12.5 (1/2 ) - M7-23-9206710 iesel 50 (2 ) 114 (4 1/2 ) 79.5 (3 1/8 ) 12.5 (1/2 ) - imensions in millimeters (inch) unless otherwise stated
125 K FILLS & TNK VNTS 90 FLUSH TNK VNT 90 angle design Unique design allows recessed flush mounting in the hull or cabin sides, protecting the vent body Modern attractive appearance and high airflow capacity arb up installation to prevent tank contamination eep or shallow cup provides for installation in material thickness up to 33mm (1-5/16 ) Part No mm mm mm mm -Max. M7-20-8906222 16 (5/8 ) 70 (2 3/4 ) 35 (1 3/8 ) 46 (1 13/16 ) 0-18 (0-3/4 ) M7-20-8906223 19 (3/4 ) 75 (3 ) 38 (1 1/2 ) 49 (1 15/16 ) 0-18 (0-3/4 ) M7-20-9106272 16 (5/8 ) 70 (2 3/4 ) 35 (1 3/8 ) 46 (1 13/16 ) 18-33 (3/4-1 5/16 ) M7-20-9106273 19 (3/4 ) 75 (3 ) 38 (1 1/2 ) 49 (1 15/16 ) 18-33 (3/4-1 5/16 ) STRIGHT FLUSH TNK VNT Straight angle design Unique design permits recessed flush mounting in the hull or cabin sides, protecting the vent body ttractive appearance and high airflow capacity Part No mm mm mm mm Max. M7-20-8906214 16 (5/8 ) 76 (3 ) 35 (1 3/8 ) 46 (1 13/16 ) 0-18 (0-3/4 ) imensions in millimeters (inch) unless otherwise stated
126 K FILLS & TNK VNTS NYSTL TNK VNT body with nylon cup and nut Flushed installation Removable cap and test fitting allow for quick and easy fuel system pressure check Suitable for 4-28mm material thickness Same face size for 16mm (6/8 ) and 19mm (3/4 ) barb fitting Part No mm mm mm mm Max. M7-20-9504835 16 (5/8 ) 71 (2 13/16) 38 (1 1/2 ) 48 (1 7/8 ) 19 (3/4 ) 90 STLON THRU HULL TNK VNT Nylon body with 316 stainless steel cap 90 angle design omes with a stainless steel integral screen Part No mm mm mm mm mm M7-20-9105450 16 (5/8 ) 69 (2 3/4 ) 33 (1 3/8 ) 48 (1 7/8 ) 25 (1 ) imensions in millimeters (inch) unless otherwise stated
127 K FILLS & TNK VNTS STLON TNK VNT body with nylon cup and nut vailable in straight or 90 angle design Various cup sizes and depths allow for installation in different material thickness Match with the Southco stainless steel thru hull design omes with stainless steel integral screen Part No Model mm mm mm mm mm M7-20-9106353 Straight 16 (5/8 ) 76 (3 ) 35 (1 3/8 ) 45 (1 3/4 ) 18 (3/4 ) M7-20-9106364 90 16 (5/8 ) 70 (2 3/4 ) 35 (1 3/8 ) 45 (1 3/4 ) 16 (5/8 ) 90 STLON TNK VNT Nylon body with 316 stainless steel cup omes with stainless steel integral screen Part No Model mm mm mm mm mm M7-20-9406583 90 16 (5/8 ) 70 (2 3/4 ) 35 (1 3/8 ) 45 (1 3/4 ) 16 (5/8 ) imensions in millimeters (inch) unless otherwise stated
128 THRU HULLS Standard Stainless Steel Thru Hulls 316 Stainless steel construction vailable with barb pipes Promotes a small visual footprint onsistent appearance across six different hose diameters Nysteel Thru Hulls 316 Stainless steel and high nickel content provides non-magnetic properties and superior corrosion resistance Light weight thru hull technology vailable with a straight or 90 degree angle Offers a one man installation with a key barb feature vailable with round face Stalon Thru Hulls 316 Stainless steel face plate and nylon body offers a light weight thru hull technology with a stainless look vailable in both straight, 90 degree and 15 degree angle designs o-injected material under the face plate provides a permanent attachment xhaust Thru Hulls 316 Stainless steel construction Incorporates a drip ring to avoid hull streaking Flapper stops water intrusion vailable with a straight or 25 degree angle design ight position angle adjustment Manifold ssemblies ssembly includes thru hull and manifold vailable in 316 stainless steel imensions in millimeters (inch) unless otherwise stated
129 THRU HULLS THRU HULL WITH R FITTING Reduced face size promotes a small visual footprint vailable in 3 body sizes and fits the 6 most popular barb fittings Part No mm mm mm mm mm M7-01-9005203 16 (5/8 ) 76 (3 ) 32 (1 1/4 ) 43 (1 11/16 ) 30 (1 3/16 ) M7-01-9205376 29 (1 1/8 ) 56 (2 1/4 ) 32 (1 1/4 ) 42 (1 15/84 ) 22 (7/8 ) M7-01-9005204 19 (3/4 ) 76 (3 ) 32 (1 1/4 ) 43 (1 11/16 ) 30 (1 3/16 ) M7-01-9105621 19 (3/4 ) 120 (4 3/4 ) 32 (1 1/4 ) 44 (1 3/4 ) 73 (2 7/8 ) M7-01-9005205 25 (1 ) 76 (3 ) 32 (1 1/4 ) 44 (1 3/4 ) 30 (1 3/16 ) M7-01-9105622 25 (1 ) 120 (4 3/4 ) 32 (1 1/4 ) 44 (1 3/4 ) 73 (2 7/8 ) M7-01-9205372 19 (3/4 ) 53 (2 1/16 ) 32 (1 1/4 ) 42 (1 5/8 ) 20 (3/4 ) M7-01-9005206 29 (1 1/8 ) 76 (3 ) 32 (1 1/4 ) 43 (1 11/16 ) 30 (1 3/16 ) M7-01-9105623 29 (1 1/8 ) 120 (4 3/4 ) 32 (1 1/4 ) 44 (1 3/4 ) 73 (2 7/8 ) M7-01-9005207 32 (1 1/4 ) 88 (3 1/2 ) 44 (1 3/4 ) 65 (2 9/16 ) 33 (1 5/16 ) M7-01-9005208 38 (1 1/2 ) 88 (3 1/2 ) 44 (1 3/4 ) 65 (2 9/16 ) 33 (1 5/16 ) M7-01-9105625 38 (1 1/2 ) 133 (5 1/4 ) 44 (1 3/4 ) 65 (2 9/16 ) 75 (3 ) M7-01-9005218 51 (2 ) 133 (5 1/4 ) 55 (2 3/16 ) 82 (3 1/4 ) 50 (2 ) 90 SHORT THRU HULL Face size is identical to the Southco standard thru hull fitting Part No mm mm mm mm mm M7-04-9305320 16 (5/8 ) 60 (2 3/8 ) 32 (1 1/4 ) 43 (1 11/16 ) 17 (11/16 ) M7-04-9305322 19 (3/4 ) 62 (2 7/16 ) 32 (1 1/4 ) 43 (1 11/16 ) 17 (11/16 ) M7-04-9305324 25 (1 ) 65 (2 9/16 ) 32 (1 1/4 ) 43 (1 11/16 ) 17 (11/16 ) M7-04-9305326 29 (1 1/8 ) 67 (2 5/8 ) 32 (1 1/4 ) 43 (1 11/16 ) 14 (9/16 ) M7-04-9305328 38 (1 1/2 ) 81 (3 3/16 ) 41 (1 5/8 ) 58 (2 9/32 ) 14 (9/16 ) imensions in millimeters (inch) unless otherwise stated
130 THRU HULLS NYSTL THRU HULL with nylon nut ttractive round face design Innovative cast thread technology minimizes rust potential Light-weight design Two face sizes Part No mm mm mm mm mm M7-01-9405396 29 (1 1/8 ) 75 (2 7/8 ) 32 (1 1/4 ) 43 (1 11/16 ) 29 (1 1/8 ) M7-01-9405400 38 (1 1/2 ) 87 (3 7/16 ) 41 (1 5/8 ) 55 (2 3/16 ) 29 (1 1/8 ) STLON THRU HULL Nylon body with 316 stainless steel cap Light-weight design with a stainless steel appearance Part No mm mm mm mm mm M7-01-9005241 16 (5/8 ) 81 (3 3/16 ) 33 (1 5/16 ) 48 (1 7/8 ) 28 (1 1/8 ) M7-01-9005242 19 (3/4 ) 86 (3 3/8 ) 33 (1 5/16 ) 48 (1 7/8 ) 28 (1 1/8 ) M7-01-9005243 26 (1 ) 86 (3 3/8 ) 33 (1 5/16 ) 48 (1 7/8 ) 28 (1 1/8 ) M7-01-9005244 29 (1 1/8 ) 87 (3 7/16 ) 33 (1 5/16 ) 48 (1 7/8 ) 28 (1 1/8 ) M7-01-9005245 32 (1 1/4 ) 103 (4 1/16 ) 41 (1 5/8 ) 60 (2 3/8 ) 33 (1 5/16 ) M7-01-9005246 38 (1 1/2 ) 103 (4 1/16 ) 41 (1 5/8 ) 60 (2 3/8 ) 33 (1 5/16 ) M7-01-9005255 52 (2 ) 130 (5 1/8 ) 56 (2 1/4 ) 82 (3 1/4 ) 46 (1 13/16 ) M7-01-9005263 19 (3/4 ) 144 (5 11/16 ) 33 (1 5/16 ) 48 (1 7/8 ) 86 (3 7/16 ) M7-01-9005264 29 (1 1/8 ) 144 (5 11/16 ) 33 (1 5/16 ) 48 (1 7/8 ) 86 (3 7/16 ) imensions in millimeters (inch) unless otherwise stated
131 THRU HULLS STLON THRU HULL NGL Nylon & 316 Stainless Steel ap arb down angle design eliminates water trapping in the drain hose. Part No Model mm mm mm mm mm M7-01-9005260 15 38 (1 1/2 ) 178 (7 ) 56 (2 1/4 ) 82 (3 1/4 ) 100 (4 ) 90 STLON THRU HULL Nylon body with 316 stainless steel cap 90 angled barb design Same face design as the Southco straight stalon thru hull Light-weight design with a stainless steel appearance Part No mm mm mm mm mm M7-04-9105418 16 (5/8 ) 69 (2 3/4 ) 33 (1 5/16 ) 48 (1 7/8 ) 25 (1 ) M7-04-9005262 19 (3/4 ) 69 (2 3/4 ) 33 (1 5/16 ) 48 (1 7/8 ) 25 (1 ) M7-04-9005256 19 (3/4 ) 81 (3 3/16 ) 33 (1 5/16 ) 48 (1 7/8 ) 28 (1 1/8 ) M7-04-9105419 25 (1 ) 95 (3 3/4 ) 33 (1 5/16 ) 48 (1 7/8 ) 50 (2 ) M7-04-9305113 29 (1 1/8 ) 92 (3 5/8 ) 33 (1 5/16 ) 48 (1 7/8 ) 35 (1 3/8 ) M7-04-9005257 29 (1 1/8 ) 115 (4 1/2 ) 40 (1 5/8 ) 60 (2 3/8 ) 28 (1 1/8 ) M7-04-9005258 38 (1 1/2 ) 119 (4 11/16 ) 40 (1 5/8 ) 60 (2 3/8 ) 33 (1 5/16 ) M7-04-9105420 52 (2 ) 124 (4 7/8 ) 56 (2 1/4 ) 83 (3 1/4 ) 38 (1 1/2 ) imensions in millimeters (inch) unless otherwise stated
132 THRU HULLS XHUST THRU HULL Innovative design features a stainless steel flapper and drip collar to prevent water intrusion and streaking of hull The one part collar features a flapper insert which can be rotated every 45 for the desired angle use F Part No Straight or mm mm mm mm mm 25 0 M7-05-9105563 One Part 50 (2 ) 138 (5 1/2 ) 57 (2 1/4 ) 80 (3 3/16 ) 53 (2 1/16 ) M7-05-9205770 One Part 64 (2 1/2 ) 146 (5 3/4 ) 88 (3 1/2 ) 118 (4 5/8 ) 46 (1 7/8 ) M7-05-9205772 One Part 76 (3 ) 146 (5 3/4 ) 88 (3 1/2 ) 118 (4 5/8 ) 46 (1 7/8 ) M7-05-9405930 25 One Part 50 (2 ) 152 (6 ) 57 (2 1/4 ) 80 (3 3/16 ) 53 (2 1/16 ) STINLSS STL MNIFOL 316 Stainless Steel Features three 19mm (3/4 ) staggered female pipe discharge parts Part No mm mm mm mm M7-09-9105511 65 (2 9/16 ) 170 (6 11/16 ) 45 (1 3/4 ) 68 (2 11/16 ) imensions in millimeters (inch) unless otherwise stated
133 RINS Stalon ockpit rain Nylon body and 316 stainless steel face pace provides a stainless appearance Flush profile ompact design with minimal internal protrusion vailable as mini version Scuppers vailable in 316 stainless steel or stalon construction vailable with barb or thread pipes Features either a check valve or a check ball to prevent water entry and enable a one way water flow F Shower rains construction Small drain holes prevent hair and dirt from entering the drain esigned to be comfortable to step on rain Plugs vailable 316 stainless steel aptured plug can be opened and closed by hand vailable in two sizes Hooded ompartment rain 316 Stainless steel cap with nylon threaded tube asy installation Heavy duty cast construction rain ccessories arb adapters ockpit drain system imensions in millimeters (inch) unless otherwise stated
134 RINS MINI OMPRTMNT RIN Stamped 304 stainless steel drain tube and rubber grip barb Suitable for deck and hatch gutter drains F Part No mm mm mm mm mm M7-16-9503701 16 (5/8 ) 12 (1/2 ) 12 (1/2 ) 18 (3/4 ) 9 (3/8 ) M7-16-9503703 19 (3/4 ) 44 (1 3/4 ) 16 (5/8 ) 22 (7/8 ) 9 (3/8 ) M7-16-9503705 25 (1 ) 44 (1 3/4 ) 22 (7/8 ) 29 (1 1/8 ) 9 (3/8 ) 90 SI MOUNT OKPIT RIN Nylon body with 316 stainless steel cap esigned to be mounted flush to the deck for complete drainage Hose barb design suitable for installation in tight spaces Part No Size mm mm mm mm mm M7-16-9005251 38 1 1/2 38 (1 1/2 ) 44 (1 3/4) 63.5 (2 1/2 ) 102 (5 ) 57 (2 1/4 ) M7-16-9005251-1 Temporary plug for 9005251/9005252 90 K RIN SUPPR KIT Nylon body with 316 stainless steel grate ompact design is suitable for applications with limited space One-way check ball design ll parts are NPSM threaded vailable in two drain head designs Part No rain Head mm mm mm mm M7-16-9405838 50 (2 ) 82 (3 1/4 ) 27 (1 1/16 ) 38 (1 1/2 ) 58 (2 1/4 ) M7-16-9405842 50 (2 ) 75 (3 ) 27 (1 1/16 ) 38 (1 1/2 ) 58 (2 1/4 ) imensions in millimeters (inch) unless otherwise stated
135 RINS RIN SHOWR FITTING WITH PIP THR & arb adaptors Fits 90 stainless steel adapters and stainless steel pipe thread adapters esigned to be used as sink, shower or deck drains vailable as surface mount versions Part No mm mm mm S.S. Nut ngle M7-16-9005301-1 31 (1 1/4 ) 15 (5/8 ) 42 (1 5/8 ) No - M7-16-9005305-1 44 (1 3/4 ) 18 (11/16 ) 70 (2 3/4 ) No - M7-16-9105512 44 (1 3/4 ) 50 (2 ) 70 (2 3/4 ) Yes - M7-16-9005305 32 (1 1/4 ) 18 (11/16 ) 50 (2 ) 70 (2 3/4 ) 90 0 Surface Mount Version M7-16-9503385 19 (3/4 ) N/ 68 (2 3/4 ) N/ 90 0 M7-16-9503386 25 (1 ) N/ 68 (2 3/4 ) N/ 90 0 F M7-16-9503387 38 (1 1/2 ) N/ 68 (2 3/4 ) N/ 90 0 SHOWR K RIN WITH NYLON PTR 316 Stainless Steel rain grate designed to maximize water flow. Part No mm mm Gasket Nut M7-16-9305351 38 (1 1/2 ) 52 (2 ) 75 (2 15/16 ) 8 mm Yes M7-16-9305352 38 (1 1/2 ) 27 (1 1/16 ) 75 (2 15/16 ) 3 mm Yes M7-16-9305353 50 (2 ) 27 (1 1/16 ) 75 (2 15/16 ) 3 mm No K SHOWR RIN SUPPRS Polished cover over can be removed for cleaning Incorporates one-way check ball design rain grate key included Part No Model mm mm mm mm M7-11-8731436 45 38 (1 1/2 ) 58 (2 1/4 ) 115 (4 1/2 ) 91 (3 5/8 ) M7-11-9405182 95 38 (1 1/2 ) 57 (2 1/4 ) 79 (3 1/8 ) 91 (3 5/8 ) imensions in millimeters (inch) unless otherwise stated
136 RINS OKPIT RIN SYSTM omes with a removable one-way flow diaphragm & stopper plug Tube can be cut to desired length F Part No mm mm M7-16-9105655 50 (2 ) 127 (5 ) M7-15-8933079 38 (1 1/2 ) 127 (5 ) SUPPR WITH R FITTING Straight angle design Features a flexible one-way PV check valve Prevents water from entering the boat Part No mm mm mm mm mm M7-13-9005309 38 (1 1/2 ) 110 (4 3/8 ) 53 (2 1/16 ) 65 (2 1/2 ) 42 (1 5/8 ) M7-13-9005310 38 (1 1/2 ) 148 (5 7/8 ) 53 (2 1/16 ) 65 (2 1/2 ) 81 (3 3/16 ) M7-13-9105516 50 (2 ) 154 (6 1/16 ) 53 (2 1/16 ) 65 (2 1/2 ) 81 (3 3/16 ) M7-13-9205380 50 (2 ) 96 (3 3/4 ) 53 (2 1/16 ) 65 (2 1/2 ) 27 (1 1/16 ) 90 STLON SUPPR Nylon body with 316 stainless steel cap 90 angle design Prevents water from entering the boat Part No mm mm mm mm mm M7-10-9305460 38 (1 1/2 ) 120 (4 3/4 ) 56 (2 1/4 ) 82 (3 1/4 ) 21 (13/16 ) SUPPR WITH PIP FITTING Straight angle design Features a flexible one-way PV check valve Prevents water from entering the boat Part No mm mm mm mm mm M7-14-9405482 38 (1 1/2 ) 79 (3 1/8 ) 53 (2 1/16 ) 65 (2 1/2 ) 29 (1 1/8 ) imensions in millimeters (inch) unless otherwise stated
137 RINS STLON SUPPR Nylon body with 316 stainless steel cap Light-weight design with a stainless steel appearance Tested to STM 638 and STM 790 Features a one-way PV check valve Part No Model mm mm mm mm mm M7-10-9005253 0 38 (1 1/2 ) 133 (5 1/4 ) 56 (2 1/4 ) 82 (3 1/4 ) 44 (1 3/4 ) M7-10-9005254 0 52 (2 ) 133 (5 1/4 ) 56 (2 1/4 ) 82 (3 1/4 ) 44 (1 3/4 ) M7-10-9105541 10 38 (1 1/2 ) 95 (3 3/4 ) 56 (2 1/4 ) 82 (3 1/4 ) 38 (1 1/2 ) M7-10-9005261 15 38 (1 1/2 ) 178 (7 ) 56 (2 1/4 ) 82 (3 1/4 ) 100 (4 ) M7-17-9005253-2 heck Valve Only/Flapper F HOO OMPRTMNT RIN Nylon body with 316 stainless steel hood Suitable for drainage for above waterline compartments vailable with or without drain plug Part No Type mm mm mm mm mm M7-16-9004267 W/O Plug Female 48 (1 7/8 ) 40 (1 1/2 ) 54 (2 1/8 ) 25 (1 ) 17 (11/16 ) M7-16-9105660 W Plug Female 48 (1 7/8 ) 40 (1 1/2 ) 54 (2 1/8 ) 25 (1 ) 17 (11/16 ) HOO OMPRTMNT WITH R PIP Nylon body with 316 stainless steel hood Suitable for drainage for above waterline compartments Part No Type mm mm mm mm mm F mm G mm M7-16-9105701 Male arb 48 (1 7/8 ) 40 (1 1/2 ) 96 (3 3/4 ) 25 (1 ) 16 (5/8 ) 40 (1 9/16 ) 40 (1 9/16 ) M7-16-9105702 Male arb 48 (1 7/8 ) 40 (1 1/2 ) 96 (3 3/4 ) 25 (1 ) 19 (3/4 ) 40 (1 9/16 ) 42 (1 5/8 ) G F OVL RIN PLUG, and stainless steel nylon retaining plug Retention cap can be operated by hand rain plug is held captive to the housing Part No Material mm mm mm M7-16-9004266 Stainless steel 54 (2 1/8 ) 25 (1 ) 12 (1/2 ) M7-16-9004269 Stainless steel 64 (2 1/2 ) 32 (1 1/4 ) 19 (3/4 ) imensions in millimeters (inch) unless otherwise stated
138 LTRONI SS SOUTHO lectronic ccess Solutions Over 60 years of innovative engineered access solutions now combined with electronic actuation for remote control and monitoring of SOUTHO products. SOUTHO electromechanical latch and lock solutions can be remotely operated by a variety of access control options such as electronic keys, keypads, RF proximity readers, RF key fobs, biometrics and custom switches. G Southco s electronic key system provides secure access control with an intuitive one touch actuation. liminates key management issues keys are easily programmed as needed Simply touch probe with programming key to enter programming mode to add or delete user keys Lock/unlock signal produced by simply touching valid iutton key to probe Programmable output timing 280 trillion possible key codes no duplication Sleep mode for minimal current draw L s integrated with probe for programming and lock status feedback ontrols all SOUTHO electromechanical locks and latches For additional details, go to www.southco.com System Part Number -90 System includes 1 Probe, 1 ontroller, and 1 Wire Harness. lectronic key is constructed using corrosion resistant materials suitable for marine applications. The -01-001 Junction box enables up to 2 electromechanical latches to be controlled by up to 2 access control systems. www.southco.com/s imensions in millimeters (inch) unless otherwise stated
139 LTRONI SS lectromechanical Latching Southco's primary focus is the electromechanical latching or locking device, the most critical element of the electronic access system. Southco has combined electronics with our extensive knowledge of mechanical access solutions to create a set of innovative electromechanical latch and lock solutions. Our intelligent latches can provide a latch status feedback signal and can be easily incorporated into a fully integrated control system or used as a stand-alone device. Our expanding range of electronic access solutions provide an easy upgrade to our existing range of mechanical access systems. hallenge Southco Marine to integrate an electronic solution to your cabin doors or deck applications or visit our website for more information. G Visible mechanical solution oncealed mechanical solution oncealed electromechanical (local or remote actuation) solution (stand-alone or fully integrated into control system) www.southco.com/s imensions in millimeters (inch) unless otherwise stated
140 SOUTHO Warranty Seller warrants that the products manufactured and sold by Seller shall be in accordance with Seller's specifications and free from defects in material and workmanship for a period of one (1) year from the date of delivery to uyer if used under normal circumstances and provided any defect(s) are not the result of: (i) installation method; (ii) customer or third party abuse or misuse; (iii) failure to adhere to Seller's instructions; or (iv) except as otherwise may be specifically stated in Seller's product literature, wear or deterioration due to environmental conditions. uyer shall give written notice to Seller within 20 days of the discovery of any alleged defect within such one (1) year period, and any action shall be brought within one (1) year after such breach of warranty is or should have been discovered. The above is the sole and exclusive warranty of Seller; there are no other warranties, either express or implied, as to any matter whatsoever, including, without limitation, the IMPLI WRRNTIS OF MRHNTILITY OR FITNSS FOR PRTIULR PURPOS. The sole and exclusive remedy of uyer for any breach of warranty by Seller shall be that Seller shall provide, upon confirmation of the defective condition of the subject part, at no cost to uyer, a replacement part for each defective part manufactured and sold by Seller to uyer, or at uyer's choice, uyer shall receive a credit toward a future purchase in an amount equal to the purchase price paid by Seller for defective parts. In no event shall seller be liable for consequential or indirect damages, or economic losses, loss of use, lost profits, down time or damages due to delay, whether by reason of breach of warranty, breach of contract, negligence, strict liability or otherwise.