REGULATIONS & COMPLIANCE. Riggers Safety LLC. 267 Winfield Cr. Corona, CA

Similar documents
Subchapter 4. Construction Safety Orders Article 24. Fall Protection. Return to index New query

DREW UNIVERSITY FALL PROTECTION PROCEDURE (DRAFT 12/11)

Walking-Working Surfaces and Fall Protection Standards Update. OSHA General Industry

FALL PROTECTION PROGRAM (OHS-0010)

FALL PROTECTION COMPARISON BETWEEN VARIOUS OSHA STANDARDS, NAVY and EM 385 (2008) REQUIREMENTS

LIGHTHOUSE SAFETY TRAINING 2018

2.2. Anchorage Point A secure point of attachment for Lifelines, lanyards or deceleration devices.

Competent Person - Fall Protection Presented by Turner Safety- your instructor is Steve Turner

Subparts D and I Walking-Working Surfaces & Personal Protective Equipment Final Rule

Occupational Protective Equipment

FALL PROTECTION

ROOF ANCHOR / D-RING ANCHOR PLATE

SECTION FACILITY FALL PROTECTION PART I - GENERAL

FALL PROTECTION WORK PLAN (Alstom Power Installation Canada)

SAFETY 101: FALL PROTECTION: REDUCING FALLS DURING RESIDENTIAL CONSTRUCTION: RE-ROOFING FACT SHEET

Risk Control at United Fire Group

FREQUENTLY ASKED QUESTIONS ABOUT FALL PROTECTION

Reviewed: New Effective: 5/18/12 Supersedes: New Preparer: Owner: Approver: Team Member, Occupational Safety Industrial Hygiene

Fall Protection ABC s

Overview. Identify fall hazardous areas Describing potential fall hazards How appropriate portable and extension ladders are used

Fall and Slip Prevention Test. 1. Fall protection is required in construction at and on scaffolds at.

American National Standards Institute, ANSI Z359 Fall Protection Code Update

FALL PROTECTION LADDERS ACCESSWAYS

ARKANSAS TECH UNIVERSITY FACILITIES MANAGMENT HEALTH AND SAFETY MANUAL

Fall Protection Guidelines. Individual Unit Function: Safety Procedure No.: SOP-0111 Page: 1 of 13. Preparer: Owner: Approver: Safety Safety Safety

FALL PROTECTION GUIDELINE

8. Fall Protection Procedures WAC

Fall Protection. 29 CFR Appendix C 29 CFR 1926 Subpart M

ROOFING FALL PROTECTION 27.I

FALL PROTECTION PLAN July 2012

Safety Manual Page 1 of 15

RIGGERS SAFETY SAFETY IS IN THE DETAILS FULL LINE CATALOG

Walking-Working Surfaces

Health, Safety, Security and Environment

Fall Protection- Part 2

At the end of this presentation you should know the difference between fall prevention, fall restraint, and fall arrest.

FALL PROTECTION AND RESCUE PLAN NS-MAYPORT BLDG RENOVATION PROJECT. (Revised Copy 11/19/2010)

RIGGERS SAFETY SAFETY IS IN THE DETAILS FULL LINE CATALOG

Fall Protection Refresher Orientation. Fall Protection Refresher Orientation 1

Fall Protection Checklist. Guardrail System

??????? is committed to providing a safe work environment for its employees and preventing occupational injuries due to falls.

Safety Tips from the WorkSafe People

FALL PROTECTION PLAN FALL PROTECTION PROGRAM

New Mexico Institute of Mining & Technology. Fall Protection Program

Fall Protection Resource Guide P AGE 1

Fall Protection Training

National Safety Stand-Down. January 22, 2016 Presented By:

Are You OSHA Compliant? Browse Our Products Specifically For Compliance With The Updated Walking-Working Surfaces and Fall Protection Standard.

Fall Protection / Open Holes & Guardrail

Reducing Falls during Residential Construction: Working in Attics

OSHA s new walking working surfaces standards

Applying Construction Fall Protection Concepts to General Industry

1.0 Scope and Application

Safety Tips from the WorkSafe People

Regulation Summary: Walking-Working Surfaces & Personal Protective Equipment (Fall Protection Systems); OSHA s Final Rule

NEW FALL PROTECTION LEGISLATION. Presented by Michael McGovern, Roland Roy

Fall Protection and Elevated Work

Written Program. For. Fall Protection. <<Company Name>> <<911 Address>> <<City, state, zip code>>

Reliance Industries, LLC Operating instructions for the / Bolt-on D-Ring Anchorage. Model # 3071

Fall Protection. Fall Protection

Fall Protection. Fall Speed vs. Reaction Time. Good body reaction time = 0.5 seconds Travel distance in 0.5 seconds = 4 feet (1.21mts.

Fall Speed vs. Reaction Time

Telecommunication Tower Technician Course Descriptions

Fall Hazards, Anchor Points and Fall Clearances OSH-2 August 7, 0900

29 CFR 1926, Subpart M. Fall Protection Program Table of Contents

FALL PROTECTION (SAF-SPI-06)

FALL PROTECTION. Supplement to Standard Training Module

Title- Fall Protection Effective Date: 03 Jan 14 Revision-0

Fall Protection- Part 1

Issue Date 12/01/09 Revision Date 01/04/18 Fall Hazard Management

WARNING! DO NOT THROW AWAY THESE INSTRUCTIONS! READ AND UNDERSTAND BEFORE USING EQUIPMENT!

New Walking-Working Surfaces and PPE (Fall Protection) Rule. Purpose of the New Rule

Fall Hazards at Walking and Working Surfaces What You Need to Know. Presented by PENTA Engineering Group, Inc. August 2017

Key provisions of OSHA's new rule on walking/working surfaces, fall protection

FACILITIES MANAGEMENT OFFICE OF ENVIRONMENTAL HEALTH AND SAFETY Fall Protection Policy 11/21/14 Last Revision

Doc No: FPP CARDINAL SURVEYS COMPANY. Safety Management System. Initial Revision Date: Version Revision No. 02 FALL PROTECTION

Department of Facilities Management. Occupational Health and Safety. Fall Protection Program

Walking-Working Surfaces Fall Protection Program

workplace fatalities involving falls to a lower level. Fall related fatalities make up 16% of workplace fatalities

Section 22 Brieser Construction SH&E Manual

Update 29 CFR Subparts D & I

Signature: Director of Environmental Health & Safety. Fall Protection

Sample Fall Rescue Plan for Bridge Work

Progressive Safety Services LLC

Why Update. OSHA updated Walking Working Standard. Who & What it Covers. Housekeeping (a) 6/25/ nd Leading cause of Workplace fatalities

What standards apply to rooftop fall protections systems?

A. Employer Provide fall protection to effected employees Ensure that all employees understand and adhere to the procedures of this plan

FALL PROTECTION PLAN

CHAPTER 10 FALL PROTECTION

FA L L P R O T E C T I O N P L A N N I N

1.2 LIMITATIONS: Consider the following application limitations before using this equipment:

TABLE OF CONTENTS Scope, application, and definitions applicable to this subpart... M Duty to have fall protection...

Title: Fall Protection Effective Date: 5/20/2006 Control Number: THG_0003 Revision Number: 1 Date: 10/10/2015 Annual Review Completed: 5/13/2015

Today s Discussion. Passive Fall Prevention. Fall Restraint. Fall Arrest. Ladders PROGRESSIVE SAFETY SERVICES LLC 2019

FALL PROTECTION PROGRAM

Click to edit Master title style. Fall Protection for the Construction Industry Webinar 04/30/2014

GEMTOR. ... when your life is on the line OWNER'S MANUAL. FLW Series Self-Retracting Lanyard/Fall Limiter

Fall Protection University Facilities Internal Procedure: July 1, 2013 Effective date: July 1, 2013 Last Modified: April 2013 Approved by: Bob Wells

EXHIBIT A FALL PROTECTION POLICY

Fall Protection Program

Transcription:

ANSI Z359 REGULATIONS & COMPLIANCE Riggers Safety LLC. 267 Winfield Cr. Corona, CA 92880. 951 371 8685. www.riggerssafety.com

General Industry: ANSI/ASSE Z359 Fall Protection Code Package Version 3.0 ANSI/ASSE Z359.0-2012 Definitions & Nomenclature Used for Fall Protection & Fall Arrest - Free ANSI/ASSE Z359.1-2016 Safety Requirements for Personal Fall Arrest Systems, Subsystems & Components ANSI/ASSE Z359.2-2017 Minimum Requirements for a Comprehensive Managed Fall Protection Program ANSI/ASSE Z359.3-2017 Safety Requirements for Positioning & Travel Restraint Systems ANSI/ASSE Z359.4-2013 Safety Requirements for Assisted-Rescue & Self-Rescue Systems, Subsystems & Components ANSI/ASSE Z359.5 Safety Requirements for Personal Fall Arrest Systems (PFAS) pending approval ANSI/ASSE Z359.6-2016 Specifications & Design Requirements for Active Fall Protection Systems ANSI/ASSE Z359.7-2011 Qualification & Verification Testing of Fall Protection Products Free Download ANSI/ASSE Z359.8 Requirements for Rope Access ANSI/ASSE Z359.9 Personal Equipment for Protection Against Falls - Descending Devices pending approval ANSI/ASSE Z359.10 Reserved ANSI/ASSE Z359.11-2014 Safety Requirements Full Body Harness for Personal Fall Arrest Systems ANSI/ASSE Z359.12-2009 Connecting Components for Personal

Fall Arrest Systems ANSI/ASSE Z359.13-2013 Personal Energy Absorbers & Energy-Absorbing Lanyards ANSI/ASSE Z359.14-2014 Self-Retracting Devices for Personal Fall Arrest & Rescue Systems ANSI/ASSE Z359.15-2014 Safety Requirements for Vertical Lifelines for Personal Fall Arrest Systems (PFAS) ANSI/ASSE Z359.16-2016 Safety Requirements for Fall Arresters for Personal Fall Arrest Systems (PFAS) ANSI/ASSE Z359.17 Safety Requirements Horizontal Lifelines for Personal Fall Arrest Systems pending approval ANSI/ASSE Z359.18-2017 Safety Requirements for Anchorage Connectors for Personal Fall Arrest Systems * ANSI/ASSE Z359.1-2016 final edition standard for fall arrest equipment is being replaced by a series of standards for components and systems. Construction Safety: ANSI/ASSE A10 Construction Package ANSI/ASSE A10.8 Scaffolding Safety Requirements ANSI/ASSE A10.24 Roofing - Safety Requirements for Low- Sloped Roofs ANSI/ASSE A10.13 Safety Requirements for Steel Erection ANSI/ASSE A10.32 Personal Fall Protection Used in Construction and Demolition Operations Confined Spaces: ANSI/ASSE Z117.1 Safety Requirements for Confined Spaces Ladder Requirements: ANSI/ASSE A14.3 Fixed Ladder - Safety Requirements Training: ANSI/ASSE Z490.1 Acceptable Practices in Safety, Health and Environmental Training

OSHA: Title 29 CFR Personal Fall Arrest Systems: http://www.osha.gov/sltc/fallprotection/ OSHA: Law & Regulations: https://www.osha.gov/law-regs.html OSHA STANDARDS FOR GENERAL INDUSTRY Subpart D, Walking/Working Surfaces 6 Trigger Height Rule Fixed Ladder Safety Devices 20 Trigger Height Rule... 1910.27(d)(5) Safety Requirements for Scaffolding, Boatswain s Chair... 1910.28(j)(1) Subpart F, Powered Platforms, Manlifts, and Vehicle-Mounted Work Platforms Powered Platforms for Building Maintenance...1910.66(f)(5)(ii)(L) Personal Fall Arrest System...1910.66 Appendix C (Mandatory) Subpart J, Permit-Required Confined Spaces...1910.146 Subpart R, Special Industries Telecommunications 4 Trigger Height...Rule1910.268(g)(1) Electric Power Generation, Transmission and Distribution... 1910.269(g)(2) OSHA Safety and Health Regulations for Construction Subpart E, Personal Protective and Life Saving Equipment Body Belts, Lifelines, and Lanyards...1926.104 Subpart L, Scaffolds Fall Protection 6 Trigger Height Rule...1926.451(g) Subpart M, Fall Protection - 03/15/2013 6 Trigger Height Rule Scope, Application and Definitions...1926.500

Duty to Have Fall Protection...1926.501(b)(13) Residential construction. Each employee engaged in residential construction activities 6 feet (1.8 m) or more above lower levels shall be protected by guardrail systems, safety net system, or personal fall arrest system. The old 25 eave-to-ground height threshold no longer applies. Fall Protection Systems Criteria and Practices...1926.502 Training Requirements...1926.503 Subpart R, Steel Erection Standards 15 Trigger Height Rule, 30 for Connectors Fall Protection...1926.760 Subpart V, Power Transmission and Distribution Linemen Body Belts, Safety Straps and Lanyards...1926.959 Subpart X, Ladders Ladders...1926.1053 Subpart CC, Cranes & Derricks in Construction Fall Protection...1926.1423 OSHA STANDARDS FOR SHIPYARD EMPLOYMENT Subpart I, Safety and Health Standards for Shipyard Employment Personal fall arrest systems (PFAS)...1915.159 Positioning Device Systems...1915.160 Subpart D, Safety and Health Regulations for Longshoring Working Surfaces, Deck Load...1918.33 (b) Longshoring, Fall Protection & Fall Protection Systems... 1918.85(j) & (k) Cal-OSHA: Title 8 for Fall Protection Cal-OSHA: Law & Regulations Fall Protection: http://www.dir. ca.gov/dosh/etools/08-010/te_fallprotection.htm Cal-OSHA: Complete list of Subchapters: http://www.dir.ca.gov/

title8/index/acronyms.html#giso Cal-OSHA STANDARDS - GENERAL INDUSTRY SAFETY OR- DER Subchapter 7, Group 1, Article 2, General Industry Safety Orders Fall Protection Standard Specifications in Subchapter 7... T8CCR 3209-3239 Elevated Locations 30 Trigger Height... 3210 Floor Openings, Floor Holes and Roofs.... 3212 Subchapter 7, Group 1, Article 2, General Industry Safety Orders Fixed Ladders - Ladder safety systems may be used on tower, water tank, and chimney ladders over 20 feet.... 3212 Subchapter 7, Group 1, Article 5, General Physical Conditions and Structures Special Design - Permanent Roof Top Installations Window Washing Anchorage 5,000lbs load applied in and direction...... 3291(f)(2)(C) Subchapter 7, Group 2, Article 10, Safe Practices and Personal Protection Repealed Safety Belts and Life Lines (Repealed)... 3388 Cal-OSHA STANDARDS CONSTRUCTION SAFETY ORDERS Subchapter 4, Article 24 Fall Protection.. T8CCR 1669 1672 Construction Fall Protection General... 1669 Personal Fall Arrest Systems 7.5 Trigger Height... 1670(a) (a) Approved personal fall arrest, personal fall restraint or positioning systems shall be worn by those employees whose work exposes them to falling in excess of 7 1/2 feet from the perimeter of a structure, unprotected sides and edges, leading edges, through shaftways and openings, sloped roof surfaces steeper than 7:12, or other sloped surfaces steeper than 40 degrees not otherwise adequately protected under the provisions of these Orders. Personal Fall Arrest(PFA) Systems: a) It must limit the maximum arresting force on an employee to

1,800 lbs. b) It must be rigged such that an employee can neither free fall more than 6 feet, nor contact any lower level, and, where practicable, the anchor end of the lanyard shall be secured at a level not lower than the employee s waist. c) Anchorage points must be able to support 5,000 lbs. per employee attached or: (1) Must be designed, installed, and used as part of a complete PFA system with a safety factor of two; and (2) Under the supervision of a qualified person. 1670(a)(10) Anchorages used for attachment of personal fall arrest equipment shall be independent of any anchorage being used to support or suspend platforms and capable of supporting at least 5,000 pounds per employee attached, or shall be designed, installed, and used as follows: as part of a complete personal fall arrest system which maintains a safety factor of at least two; and (B) under the supervision of a qualified person. PFA System must be used if a fall distance of 15 ft. or greater during the following: a) Work from buildings, bridges, structures on construction members, such as trusses, beams, purlins, or plates that are of at least 4 nominal width. 1669(a) b) Ironwork other than connecting. 1710(g)(2) c) Work on structural wood framing systems and during framing activities on wood or light gauge steel frame residential/light commercial construction. 1716.1(c)(1),1716.2(e) PFA System must be used at any height during work: On roofs sloped steeper than 7:12 On roofs, while an operator uses a feltlaying machine or other equipment that requires the operator to walk backwards From boatswain s chairs. 1662(c) From float scaffolds. 1663(a)(5) From Suspended or Needle-beam scaffolds.

NOTES: RIGGERS SAFETY Riggers Safety, LLC 267 Winfield Cr. Corona, CA 92880 951.371.8685 www.riggerssafety.com