PUREX PROTECT PLUS Phosphoric Acid / Vinyl Copolymer and spas For the control, removal and prevention of staining in pools and spas When noticing calcium build up or stains on pool surface Distribute straight from bottle around pool with filter running. 1 litre 6/1
PUREX SAND FILTER CLEANER Sulphamic Acid & Surfactants To clean and maintain sand filter to run efficiently When sand filter is not running at 100% capacity Backwash filter, then distribute through skimmer box with filter running For removal of substances that backwash cannot remove eg. hair, body fats, sunscreens and calcium scaling. This product is excellent for rejuvination of old sand. 1 kg 6/2
PUREX CARTRIDGE FILTER CLEANER Mineral Acid / Biodegradable Surfactants USAGE ON: Cartridge Filter To degrease and clean cartridge When cartridge is soiled and dirty, causing pressure build up in filter Fill a large bucket/receptical with approx. 40 litres of water add 1 litre of product. Remove cartridge and soak overnight, then hose clean For best results ensure cartridge is fully immersed. Rotate or turn cartridge over in solution if necessary 1 litre 6/3
PUREX OXY BOOST Peroxygen Compound Inground and Aboveground Pools and Spas A non chlorine based shock agent. It oxidizes in the water allowing water to sparkle. After pool or spa has heavy use. Add direct to water with filter running. A great way to shock water without over chlorinating. Oxy Boost converts saltwater into liquid chlorine, greatly assisting the salt water chlorinator.. 1kg, 4kg, 10kg 6/4
PUREX SAND FILTER AID Diatamaceous Earth with Cellulose USAGE ON: Sand Filters Helps the filter to filter to the finest micron Cloudy water or fine particles which are stubborn to remove Backwash filter, pour through skimmer with filter running for 24 hours or until clear then backwash. Repeat if necessary. 1 kg 6/5
PUREX SALT CELL CLEANER N.O.S. Corrosive Liquid/ Phosphoric Acid / Organic Surfactants Salt electrodes To remove calcium build up from salt cell When calcium builds up on cell Pour salt cell cleaner into container, submerge cell until calcium softens and hose off Product is designed to be used at full strength, DO NOT DILUTE 5 litre 6/6
PUREX CAL. KILL Magnesium Sulphate Inground and Aboveground pools Helps prevent leeching & corrosion of pool walls & surfaces, lowers calcium levels in pool water, hence increasing Salt Cell life and efficiency. When calcium levels are high, also use when noticing rapid and hard calcium build up on electrode. Mix with water in bucket and distribute evenly around pool with filter running. 4kg 6/7
PUREX METAL OUT Tetrasodium Salt Removal of metals eg. iron, copper and magnesium as a preventative against staining Recommended on newly filled pools or in areas of bore water Dissolve in a bucket and distribute evenly around pool with filter running 1kg 6/8
PUREX STAIN REMOVER Organic Acids Inground and Aboveground Pools To remove leaf & metal stains eg. plating When stains such as plating or leaf stains are visible. Drop chlorine below 1ppm. Turn filter off. Add stain remover to affected area where possible. Leave filter off for 24 hours. No swimming, then superchlorinate and adjust ph where necessary. 1kg 6/9
PUREX D.E BOXED Diatomaceous Earth D.E. Filter and Sand Filters To coat filter element and collate fine particles After every backwash with DE filter, with sand filter use to enhance filter performance Add to skimmer basket with filter running 4.54kg, 11.35kg 6/10
PUREX PHOSPHATE REMOVER & ALGAE GROWTH INHIBITOR Lanthanum Chloride, ponds & aquariums. To lower Phosphate levels in pool water & keep your pool phosphate free. Inhibits the growth of algae. Every 2-3 days. Pour slowly through pool skimmer box with filter running. Compatible with ALL pool chemicals.. Completely soluble. Safe to use with cartridge filters. 1 litre, 2.5 litre, 5 litre, 25 litre 6/11
PUREX TILE & VINYL CLEANER Alkaline salts USAGE ON: Pool and spa covers, pool and spa tiles, BBQ's, outdoor furniture and tiled floors To maintain and clean healthy pool and spa surrounds When mould or mildew appear on surfaces Apply Purex Tile and Vinyl Cleaner direct to the area to be cleaned. Rub briskly with a sponge or cloth, then simply wash off with water Use regularly to keep furniture etc in good condition 750ml 6/12
PUREX LIQUID CHLORINE Sodium Hypochlorite 12.5% Primary Sanitiser Daily Pour directly into pool 5 ltr, 15 ltr, 20 ltr, 25 ltr 1/1
PUREX LOWEST RESIDUE GRANULAR CHLORINE Calcium Hypochlorite Primary sanitiser Daily Mix with water in bucket and distribute evenly around pool. Always add product to water, not water to product. A1 quality Fast dissolving Lowest residue chlorine Best added in evening to extend chlorine life. 500g, 2kg, 4kg, 10kg, 20kg, 40kg 1/2
PUREX GRANULAR CHLORINE Calcium Hypochlorite Primary sanitiser Daily Dissolve in bucket of water and distribute around pool. Always add product to water, not water to product. Best added in evening to extend chlorine life. 2kg, 4kg, 10kg, 20kg, 40kg 1/3
PUREX STABILIZED CHLORINE Sodium Dichloroisocyanurate Sanitiser and shock dosing agent Daily except with cartridge filter Add directly to pool (no residue) Prolonged use with cartridge filters may result in cyanuric acid build up 500g, 1kg, 2kg, 4kg, 10kg, 25kg,50kg 1/4
PUREX BAQUASHOCK Hydrogen Peroxide and spas Primary sanitiser, controls algae & clarifies Only use as primary sanitiser. Not to be used with bromine, lithium, chlorine etc. Turn filter off, distribute straight from bottle around pool. Leave overnight then filter normally Strong sanitiser with no odour. Good alternative for people with sensitive skin. 5 litres 1/5
PUREX JUMBO TABLETS 200G Trichloroisocyanuric Acid Slow release back up sanitiser As an extra chlorine boost when pool subjected to heavy use Place in float or skimmer basket Ideal to use when on holidays 1kg, 2kg, 10kg, 50kg 1/6
PUREX TRICHLOR TABLETS 20G Trichloroisocyanuric Acid Slow release back up sanitiser As an extra chlorine boost when pool subjected to heavy use Place in float or skimmer basket Ideal to use when on holidays 2kg, 4kg, 10kg, 45kg 1/7
PUREX MULTI-ACTION JUMBO TABLETS 200G Trichloroisocyanuric Acid / Copper Sulphate Pentahydrate / Poly-Aluminium Chloride Blend Slow release back up sanitiser As an extra chlorine boost when pool is subject to heavy use Place in float or skimmer basket Same as traditional Purex Jumbo Tablets with added algaecide & clarifier. Great when holidaying. 1kg, 2kg, 10kg 1/8
PUREX STABILIZER Isocyanuric Acid To protect chlorine from UV rays During the hot weather periods Service pool. Remove auto pool cleaner. Mix into a slurry then distribute straight into pool. Do not vacuum until dissolved approximately 3 to 4 days Non toxic. Can still swim whilst undissolved. 1kg, 2kg, 3kg, 25kg 2/1
PUREX BUFFER Sodium Bicarbonate Spas, hot tubs, inground & aboveground pools To increase ph & total alkalinity for swimmer comfort & chemical balancing. When ph & alkalinity is low Dissolve in water & add gently through suction line. It is important that Buffer be added slowly to spa or pool to avoid plating of spa or pool water. Plating is rare but can possibly occur if ph is shocked dramatically up or down, this is when metals in the water can turn from liquid into solid form causing staining. 2kg, 4kg, 10kg, 12kg, 25kg 2/2
PUREX DRY ACID Sodium Bisulphate Spas, hot tubs Inground and Above ground pools To decrease ph, swimmer comfort & chemical balancing. When ph is high Dissolve in a bucket of water. Broadcast directly into deepest end of spa where water flow returns to help disperse. 3kg, 16kg, 25kg 2/3
PUREX HARDNESS RAISER Calcium Chloride and spas To raise low hardness levels of water When you have a low hardness level. Use a test kit and adjust accordingly Add directly from bottle/bag around pool with filter running Helps protect heater elements because the water becomes corrosive with low hardness levels. 4kg, 10kg, 25kg 2/4
PUREX ph INCREASER Sodium Carbonate To raise ph only When ph is low and alkalinity is at correct level Mix in water and distribute evenly around pool with filter running. ph Increaser has a ph of 15 as opposed to Buffer (sodium bicarb) which is 8. Refer to label for dosages. 2kg, 25kg 2/5
PUREX HYDROCHLORIC ACID Hydrochloric Acid 32% and spas To lower ph and alkalinity When ph and alkalinity are too high Mix into a bucket of water. Distribute evenly around pool with filter running Use caution when using this product. 5 ltr, 15 ltr 2/6
PUREX JUMBO STABILIZER POOL TABLETS 200G Isocyanuric Acid To protect chlorine from UV rays During the hot weather periods Service pool. Add 1 x 200g tablet directly into skimmer basket and keep pump running for 8 hours. Repeat dose until required level is achieved. Non toxic. Can still swim whilst undissolved.. 800g, 1.8kg, 10kg 2/7
PUREX HEAVY DUTY BLACK SPOT & ALGAE KILLER Trichloroisocyanuric Acid To kill and prevent black spot algae When black spot is visible Scrub affected area with wire brush and pour straight onto affected area 1 kg 3/1
PUREX POOL ALGAECIDE Benzalkonium Chlorine To kill and control algae When pool has mustard or green algae blooms Pour directly into pool with filter running Can also be used as a shock or maintenance dose. Refer to label for dosages 1 litre, 5 litre 3/2
PUREX LONG TERM ALGAECIDE Cupric Ammonium Salts To control and kill algae over long periods. AN EXCELLENT WINTERISER 3 monthly dose recommended Mix in bucket and disperse around pool with filter running Do not swim for 2 hours after usage. 1 litre 3/3
PUREX METAL FREE ALGAECIDE A combined blend of Polyoxyethylen (dimethylimino) To kill and control algae Can be used as a maintenance dose and also on existing algae Distribute evenly straight from bottle around pool with filter running Can be added directly with chlorine for faster results. Refer to label for dosages 1 litre 3/4
PUREX BLACK SPOT REMOVER Cupric Ammonium Salts To kill and control black spot algae As a treatment for existing algae and also as a preventative on future black spot growth Add straight from bottle to pool with filter running. Do not add chlorine for 24 hours before or after using Do not swim in pool for 2 hours after using. 1 litre 3/5
Purex tropical algaecide Benzalkonium Chloride, Copper, a complex blend of Copper Salts To control Blue-Green, Black and Mustard Algae When pool has Blue-Green, Black or Mustard Algae blooms Pour directly into pool with filter running Can also be used as a shock or maintenance dose 2.5 ltr, 5 ltr 3/6
PUREX WATER POLISHER Cationic Polymer Inground & Aboveground Pools/Spas & Hot Tubs For the removal of suspended particles and the creation of crystal clear pool & spa water Murky cloudy water Dilute in a bucket of water. Backwash filter, or hose cartridge. Broadcast over surface of pool or spa. This product is used to clear cloudy water. IT IS ADVISED to clean filter & shock. Before adding clarifier run filter for 24 hours or until clear depending on filter size & efficiency no swimming until clear. 1 litre 4/1
PUREX ENHANCE Cationic Polymers Clarifies and flocs Cloudy water or suspended solid matter eg. spilt potting mix or dirt washing into pool When using as a floc,top pool up. Service filter (backwash, clean etc). Distribute around pool. Run filter for 2 hours. Shut pool down for 24 hours. Vacuum to waste. Use a smaller dose regularly to clarify and keep your pool sparkling clean Refer to label for dosoges 1 litre 4/2
PUREX POOL FLOC Aluminium Sulphate To drop suspended particles to the pool floor When large amounts of foreign matter are in pool Top up pool. Raise ph to 8. Add product. For sand filter run on recirculate for 2 hours then shut down for 24 hours. Vacuum to waste. For cartridge filter Add product. Remove cartridge elements and run for 2 hours. Shut down for 24 hours and vacuum to waste. (If no waste system, replace filter element and vacuum through filter continuously cleaning cartridge). 2kg, 25kg 4/3
PUREX CLARIFYING CUBES Cationic Polymer Gel To maintain water clarity At all times Place in pool skimmer basket Does swell whilst in skimmer basket but is non toxic and will cause no harm when emptying out leaves. To avoid handling gel, place product first in a skimmer sock 70g (single), 140g (twin pack) 4/4