ASTFFL8 SQA - Unit Code H54K 04 Assess and estimate work required to limit damage to structures after flood

Similar documents
ASTFFL9 - SQA Unit Code H54L 04 Assess and estimate work required to limit damage to contents after flood

Overview IMIARBBP21. Carry Out Motor Vehicle Body Metal Inert Gas (MIG) Brazing Operations

ASTICT1 - SQA Unit Code H54P 04 Prepare to carry out cleaning operations on information communication technology (ICT) equipment

Overview ASTATT3. Carry out air tightness testing for single dwellings and other small buildings

SEMMPF201 Complying with Statutory Regulations and Organisational Safety Requirements

Overview. OPIPOH7 - SQA Unit Code HG1X 04. Operate an Oil and Gas Process (Gas Compression)

SEMBIT SQA Unit Code F9JC 04 Complying with statutory regulations and organisational safety requirements

SEMEEE36 Checking the compliance of electrical equipment against the specification

LANTw17 - SQA Unit Code H2RX 04 Prepare for, and agree, emergency treework operations

Overview ASTATT2. Prepare building for air tightness. testing

Overview. OPIPOH10 - SQA Unit Code HG Operate an Oil and Gas Process ( Gas Treatment)

SEMLATA3-12 Measuring, weighing and preparing compounds and solutions for laboratory use

COSAO26 Identify workplace health and safety hazards and control risks in asbestos surveying and analysis

SKAPP02. Deal with substances hazardous to health. Overview

SEMMME3-073 Checking that completed assemblies comply with specification

COGPOLY39 Meet safety, health and environmental requirements in the workplace

EUSMUNC06 (SQA Unit Code - FG2W 04) Locate and avoid supply apparatus for Utilities Network Construction

ASTATT10 Carry out air tightness testing on large and complex, high rise and phased hand over zonal buildings

ASTC210 (SQA Unit Code - F4PS 04) Clean confined spaces

SEMCW2-10 Testing quartz watches

SKSTEX36(SQA Unit Code-H7C9 04) Calibrate textile production equipment

LANCU50 - SQA Unit Code F0N3 04 Prepare deer for human consumption

PROMP261 (SQA Unit Code H9J8 04) Use reel handling equipment

LANNAC3 - SQA Unit Code F8J4 04 Maintain the cleanliness of the working environment

SEMETS3-17 Checking and calibrating mechanical inspection equipment

LANCU60Ga - SQA Unit Code D9HX 04 Contribute to the management of a fishery

Overview. SEMEMI211 SQA Unit Code HF4E 04 Carrying out modifications or rewiring electrical circuits

Overview LANCS79 - HY3G 04. Control vertebrate pests and predators by shooting

SEMAER2_41 Dismantling and removing aircraft access structures

Overview EUSSAM12. Carry out tightness testing and direct purging of gas installations

SKAC25 Operate plant to maintain the quality of pool water

SFJFRSFF5 SQA Unit Code (H9FD 04) Protect life and the environment from the effects of hazardous materials

LANCS17 SQA Unit Code H Maintain and repair paths or surfaces

Overview IMPEM163S. Carry out preventative planned maintenance on instrumentation and control equipment used in food and drink operations

SEMEEE3-34 Carrying out functional tests on electrical equipment

SEMFEW205 - SQA Unit Code H1VP 04 Joining materials by the manual MIG/MAG and other continuous wire processes

LANH29 SQA Unit Code H52B 04 Implement plans for the management of sports turf areas

SEMEMI SQA Unit Code H2AP 04 Carrying out fault location on electrical equipment and circuits

LANH23 SQA Unit Code H Exhume coffins and remains

Overview. LANGa40. Stalk and cull deer

SEMEM3-65 Servicing anaesthetic and ventilation equipment

SEMME269 - SQA Unit Code H2BK 04 Cutting and shaping using NC/CNC plasma or gas cutting machines

SFJFF3 - SQA Unit Code D7WM 04 Save and preserve endangered life

SEMEMI SQA Unit Code H2AX 04 Carrying out scheduled maintenance tasks on fluid power equipment

PPLGS2033 Maintain cellars and kegs

SEMIC05 Installing mechanical equipment

SEMPEO SQA Unit Code H2CB 04 Preparing and Manoeuvring Armoured Fighting Vehicles (AFVs) for Maintenance and Transportation

SCOPE OF WORK, SAFETY METHOD STATEMENT & RISK ASSESSMENT

Overview. SEMEMI216 SQA Unit Code HF4G 04 Carrying out fault location on fluid power equipment and circuits

LANAqu12 SQA Unit Code HC0G 04 Monitor the aquatic production environment for farmed fish/shellfish

SFHCHS132 Obtain venous blood samples

SFHCHS78 Administer oxygen safely and effectively

SEMEM3-73 Maintaining medical gas pipeline systems and equipment

LANCU46v2 - SQA Unit Code H2PW 04 Control vertebrate pests and predators using traps

SEMEM3-78 Testing and calibrating instrumentation and control equipment and circuits

SEMFEW339 - SQA Unit Code H1WC 04 Slinging, lifting and moving materials and components

SEMFWE SQA Unit Code H1W9 04 Forming platework using power rolling machines

Don t let a fall shatter your life!

SEMAE3064 Installing aircraft visual display units and computer systems

EUSCS04 Overseeing work in confined spaces

Generic Health and Safety Risk Assessment

Location and Avoidance of Underground Apparatus

Health and Safety Inspection Procedure

SEMEMI SQA Unit Code H2B7 04 Assisting in the installation of compressed air equipment

SEMFWE3-33 SQA Unit Code HF2X 04 Cutting and shaping materials using portable thermal cutting equipment

Specific Safety Legislation/Codes of Practice/Australian Standards applicable to this JSA (Tick those applicable).

Overview. LANTw31. Carry out aerial tree rigging

Midwest Consortium 8HR Modular Exam Inspect/Don/Doff

This standard comprises the following:

Overhead Irrigation Installation Guide DOM Copyright First Tunnels Ltd 2012.

Overview EUSDSG3.6. Gas tightness testing and direct purging

Contractor / Exhibitor Handbook

WORK METHOD STATEMENT ELECTRICAL

Appendix 4C - Sample SWMS Trenching

SEMME2135 Assisting in modifying and adding electrical circuits in yachts and boats

Understanding health and safety in gas utilisation

PERMIT-REQUIRED CONFINED SPACES PROGRAM

Kestrel Mine Induction Overview

Safety Risk Assessment Driving Grey Fleet Vehicles

SEMPEO SQA Unit Code FP2M 04 Maintaining mechanical devices and equipment

Unit PM 2.3 Health, Safety and Legal Aspects of Pest Management Specimen Paper

WORK METHOD STATEMENT TERMITE PROTECTION

Entry Level Assessment Blueprint Fundamentals of Construction

Course outline: 111 WH&S E101A UEENEEE101A - Occupational Health and Safety regulations, codes and practices in the workplace

Safety Risk Assessment Carpentry

Workington Golf Club GOLF BUGGY POLICY 2017

Water Rescue Technician

Confined Space Rescue Technician

INTERNATIONAL LIFE SAVING FEDERATION LIFESAVING POSITION STATEMENT - LPS 19 USE OF PERSONAL PROTECTIVE EQUIPMENT (PPE)

HS26 Working at Height Policy and Procedure

United Gas Derivatives Company UGDC. Guidance for the Selection and Use of Personal Protective Equipment (PPE) Procedure

Method Statement: Testing Dry Riser System

CAL FIRE/ Riverside County Fire Department. LARRO (include copy of certificate with registration page)

CCSSL35 Carry out the wiring and testing of electrical circuits and equipment

SEMAE3071 Installing aircraft countermeasure systems

Purpose To evaluate each contestant s ability to layout and burn a plate according to drawing specifications.

Safety at Work. Rules for Staying Alive

SEMFWE305 HY20 04 Welding materials by the Semi-Automatic MIG/MAG and Flux Cored Arc processes

Job Hazard Analysis. University of Washington Seattle Campus Facilities Services Campus Engineering & Operations Seattle, WA 98195

Staff Contractors. Public. Staff Contractors

Transcription:

ASTFFL8 SQA - Unit Code H54K 04 Assess and estimate work required to limit damage to structures after Overview 1 Confirm extent and nature of damage caused to structures by 2 3 ASTFFL8 1

Performance criteria Confirm extent and nature of damage caused to structures by P1 P2 P3 P4 P5 P6 have permission before you enter the premises wear the correct personal protective equipment required have the relevant documents, tools and equipment needed confirm that services are in a safe condition before you enter premises use approved methods and procedures to determine damage to structures record full and accurate details of the damage to structures P7 wear the correct personal protective equipment required P8 have the relevant documents, tools and equipment needed P9 use approved procedures and methods to determine the work required P10 record full and accurate details of the work required to structures P11 confirm that you have all the relevant information you need P12 base your calculations on work required to achieve agreed condition of premises P13 record costs accurately, fully and in a way that can be confirmed P14 produce reports of work required following instructions and procedures ASTFFL8 2

Knowledge and understanding Confirm extent and nature of damage caused to structures by K1 K2 K3 K4 K5 K6 K7 K8 why and from where to get permission to enter premises the correct personal protective equipment required and where to get it from why you should wear personal protective equipment what tools, equipment and documents you require what services are on site and how to confirm that they are in a safe condition and the possible consequences of not doing so the approved procedures and methods to use to identify damage to structures which documents you need to complete what information is required and who receives copies K9 the correct personal protective equipment required and where to get it from K10 why you should wear personal protective clothing K11 what tools, equipment and documents you need K12 the approved methods and procedures to use K13 which documents you need to complete K14 what information is required and who receives copies K15 which documents you need and how to complete them K16 what information you need to determine costs and produce reports; K17 typical costs of materials and labour K18 how to determine costs and produce reports of limitation work required ASTFFL8 3

Additional Information Scope/range Confirm extent and nature of damage caused to structures by 1 permission from: clients; safety experts 2 personal protective equipment: hard hat; coveralls; gloves; safety glasses; safety boots; face masks 3 tools and equipment: tape measure; lamps; screwdriver; hammer; pens; ladders; camera; hygrometer; hydrometer; moisture meter; sampling swabs; air monitors 4 services: electricity; water; gas; heating oil 5 methods and procedures: visual; physical; take measurements 6 structures: ceilings; floors, walls; doors; skirting boards; services; fixtures; roof; paths; driveways 7 personal protective equipment: hard hat; coveralls; gloves; safety glasses; safety boots 8 tools and equipment: tape measure; lamps; screwdriver; hammer; pens; ladders; camera; hygrometer; hydrometer; moisture meter; sampling swabs; air monitors 9 procedures and methods from: your own organisation; your clients; current legislation 10 structures: ceilings; floors, walls; skirting boards; roof; paths; driveways 11 information from: your own organisation; insurance company 12 information about: hazards; extent and nature of damage; work required to limit damage; agreed client expectations; timescales; costs and availability of equipment 13 instructions and procedures: your own organisation; insurance company ASTFFL8 4

Developed by Asset Skills Version number 1 Date approved March 2003 Indicative review date Validity Status Originating organisation Original URN Relevant occupations Suite Key words March 2005 Current Original Asset Skills FFL8 Cleaning Services Operations Cleaning and Support Services - Fire and Floods damage limitation, assess damage, quotations, work requirements ASTFFL8 5