Material Safety Data Sheets for Cured Bullet Liner Material

Similar documents
Safety data sheet Finished Foam - Article Revision date : 2007/05/18 Page: 1/5

Safety data sheet Finished Foam - Article Revision date : 2006/08/28 Page: 1/5

MSDS ELASTOCAST 70110R RESIN

Material Safety Data Sheet

Material Safety Data Sheet

Material Safety Data Sheet

Safety Data Sheet Jacquard Discharge Paste

Safety Data Sheet MasterFiber M70 3/4" 1LBx24 Revision date : 2010/12/13 Page: 1/5

Safety data sheet ULTRADUR B4406G6 UNCOLORED Q113

Safety data sheet decolourant Revision date :5/6/2015 Page: 1

Safety Data Sheet Page: 1. Section 3 HAZARDS IDENTIFICATION Emergency Overview

Chad Labs Corporation USA

Revision Date: 7/31/2015 Page 1/5

Safety data sheet Sorbead WS Revision date : 2009/04/07

Safety Data Sheet RHEOPEL PLUS D Revision date : 2011/03/28 Page: 1/6

Safety data sheet Divergan* F Revision date : 2006/06/08 Page: 1/6

Safety data sheet Mearlin Super Sparkle 9110S Revision date : 2007/11/01 Page: 1/6 Version: 1.0

Safety data sheet ULTRASON E 2010 G6 UNCOLORED HIGH TEMPERATURE POLYMER Revision date : 2006/04/28 Page: 1/5

Safety Data Sheet TUF TRAC TINT BASE NEUTRAL Revision date : 2009/12/02 Page: 1/6

Safety Data Sheet Roadranger GREASE EP-2 Revision date : 2011/06/20 Page: 1/6

Safety data sheet CONIPUR 78 PTA Revision date : 2009/07/30 Page: 1/6

Safety Data Sheet CITRUS DEGREASER CLEANER Revision date : 2009/11/18 Page: 1/6

Safety Data Sheet 911K Light-Ends Glycerine Revision date : 2015/07/29 Page: 1/7

Safety data sheet Lutensol* TO 6 Revision date : 2006/08/28 Page: 1/6

Safety data sheet NAVITAS 33 Revision date : 2009/03/26 Page: 1/5

Safety Data Sheet Sodium Hydroxide tech. (30%) Revision date : 2014/08/11 Page: 1/8

Safety data sheet Golpanol* PME Revision date : 2005/12/21 Page: 1/6

Safety Data Sheet Plastolein 9798-U Polymeric Plas Revision date : 2015/03/11 Page: 1/7

Material Safety Data Sheet

Safety data sheet GLENIUM 3030 NS Revision date : 2009/03/30 Page: 1/5

Safety data sheet Enertite RESIN Revision date : 2009/04/06 Page: 1/5

Chemical name Iron oxide carbon black

Safety Data Sheet RHEOCRETE CNI Revision date : 2009/10/02 Page: 1/6

Safety Data Sheet SPRAYTITE 158-LDWREV RESIN Revision date : 2012/05/21 Version: 1.0

Safety data sheet ULTRAMID B3WG6 BLACK BGVW NYLON 6 RESIN Revision date : 2006/05/17 Page: 1/6

Safety data sheet FECOAT 1000 UF 1601 ACRYLIC PRIMER BLACK Revision date : 2007/11/29 Page: 1/6

American Plant Food Corporation

Safety data sheet SPRAYTITE 178-F B-RESIN Revision date : 2007/05/03 Page: 1/6

Safety data sheet Tetronic 904 Revision date : 2008/06/24 Page: 1/6

Safety data sheet WABO NEOLUBE Revision date : 2009/04/22 Page: 1/6

Safety data sheet MASTERFLOW 648CP PLUS GROUT PTB Revision date : 2009/04/30 Page: 1/6

Safety Data Sheet WALLTITE ECO v.3 RESIN Revision date : 2012/04/20 Page: 1/6

Safety data sheet Vitamin D3 1.0 Mio IU/G Revision date : 2007/04/24 Page: 1/6

Safety data sheet MICRO AIR Revision date : 2009/05/20 Page: 1/6

Safety Data Sheet Tryfac 5560-A TDA-6 Phosphate Revision date : 2015/05/26 Page: 1/7

Safety data sheet GRADE F 160 SAMPLE Revision date : 2009/08/07 Page: 1/6

HMIS Rating. Material Safety Data Sheet Bomanite Surface Deactivator. Revision Date: Version: 1

MATERIAL SAFETY DATA SHEET. fill in your phone numbers SECTION 1 PRODUCT INFORMATION SECTION 2 INGREDIENTS

Safety Data Sheet MasterFiber M 70 Revision date : 2015/10/05 Page: 1/8

Safety data sheet Pad N Gray kg PE-Drum, removable head Revision date : 2006/12/07 Page: 1/5

Safety data sheet Protectol* PE Revision date : 2006/09/25 Page: 1/6

Safety Data Sheet Pluriol E 200 LS Revision date : 2014/08/11 Page: 1/7

Safety Data Sheet WALLTITE ECO v.3 RESIN Revision date : 2012/01/05 Page: 1/6

Safety Data Sheet. Preformed Line Products, Inc (CHEMTREC) (Local)

Safety Data Sheet. AB Page 1 of 6 January 01, Relevant routes of exposure: Eye contact, skin contact, inhalation, ingestion

Safety data sheet HYDROZO SILANE 40 VOC Revision date : 2009/01/12 Page: 1/7

Safety data sheet DEGADECK POLYMER CONCRETE FILLER Revision date : 2009/03/18 Page: 1/6

Safety Data Sheet ALUMINA SUNSTONE Revision date : 2011/07/15 Page: 1/6

Safety Data Sheet MTop PGM 155 (MS) green also DEGADUR PIGMENT GREEN P5 Revision date : 2014/05/20 Page: 1/8

BASF Corporation. Material Safety Data Sheet

Safety data sheet ChiPros* (R)-1-Phenylethylamine Revision date : 2006/01/04 Page: 1/7

Safety Data Sheet MasterFiber MAC 100 Revision date : 2018/04/15 Page: 1/8

Safety Data Sheet PA (Zytel 101 NC010) Revision date : 2015/02/13 Page: 1/8

Safety data sheet Tamol* NN 8906 Revision date : 2006/06/12 Page: 1/6

Safety Data Sheet FLEXCOAT COLOR SERIES P Revision date : 2013/07/17 Page: 1/7

Safety Data Sheet MasterFiber M 70 also MasterFiber M70 Revision date : 2012/04/25 Page: 1/5

Safety Data Sheet. AK Page 1 of 6 January 01, Appearance/Odor: Thick, viscous, white to off-white liquid with a mild ammonia odor

Safety Data Sheet Luvitec K 90 20% Geismar na Revision date : 2014/07/25 Page: 1/7

Revision date : 2007/01/02 Page: 1/7. 24 Hour Emergency Response Information CHEMTREC: BASF HOTLINE: HELP

Safety Data Sheet MasterRoc MP 355 PART A also MEYCO MP 355 A3 PART A Revision date : 2015/03/28 Page: 1/7

Safety Data Sheet Disponil NG 1080 Revision date : 2011/06/20 Page: 1/6

SAFETY DATA SHEET -MSDS- Glaze (Glz5510) This product contains considered hazardous components Chemical name CAS No EC No.

M a t e r i a l S a f e t y D a t a S h e e t

Material Safety Data Sheet CoolingCare 8141

Material Safety Data Sheet Magnesium stearate

Safety Data Sheet ULTRAMID NATURAL NF2001 POLYAMIDE Revision date : 2014/03/12 Page: 1/8

MATERIAL SAFETY DATA SHEET

SOUNDLEVEL Next Generation Sound Reducing & Self- Leveling Liquid Underlayment

SAFETY DATA SHEET. Page 1 of 5 1. PRODUCT AND COMPANY IDENTIFICATION

Revision Date: 2012/06/26 Page: 1 of 7 Version: 5.0

Safety Data Sheet Advanced Moist Complex NP Revision date : 2017/11/15 Page: 1/8

Safety Data Sheet SET 45 Revision date : 2010/05/10 Page: 1/6

Safety Data Sheet MasterProtect 8065CP also Emaco CP Intact 65G Revision date : 2015/04/07 Page: 1/8

SAFETY DATA SHEET 1. PRODUCT AND COMPANY INFORMATION

Safety Data Sheet Novodur HH-112 Natural Revision date : 2011/12/01 Page: 1/8

Safety data sheet Polyetheramine D 2000 Revision date : 2006/08/18 Page: 1/6

Cen-Pe-Co Hy-Torque Gear Lube Red With Temp Tac Page 1 of 5 05/01/08 MATERIAL SAFETY DATA SHEET

Safety Data Sheet. Summit Select All-in-One Hardwood Adhesive

Safety Data Sheet MasterFiber M 100 Revision date : 2018/05/09 Page: 1/8

Safety Data Sheet VERSAMID EH 50

MATERIAL SAFETY DATA SHEET

#1 Trincity Drive Trincity Industrial Estate Trincity Trinidad and Tobago 2. COMPOSITION/INFORMATION ON INGREDIENTS

Safety Data Sheet Pluriol E 4000 Pastille Revision date : 2014/08/15 Page: 1/8

SAFETY DATA SHEET MSDS DATE: 6/27/2016

Safety Data Sheet. Section 1: Product and Company Information. Section 2: Hazards Identification

Material Safety Data Sheet

0800 POISON A

Safety data sheet Baxxodur EC 310 Revision date : 2009/01/16 Page: 1/7

MATERIAL SAFETY DATA SHEET C-MUL SUN DRILLING PRODUCTS CORP.

SAFETY DATA SHEET. Great Lakes Orthodontics 200 Cooper Ave Tonawanda, NY CHEMTREC:

Transcription:

Material Safety Data Sheets for Cured Bullet Liner Material 1. SUBSTANCE/PREPARATION AND COMPANY IDENTIFICATION Company: Burtin Polymer Labs 100 Enterprise Dr Cartersville, GA 30120 770-607-0755 24 Hour Emergency Response Information: 800-424 9300 CHEMTREC 770-607-0755 Burtin Polymer Labs Chemical family: Aromatic polyurea/polyurethane Synonyms: POLYURETHANE/POLYUREA ELASTOMER 2. COMPOSITION/INFORMATION ON INGREDIENTS Chemical Name CAS# Ingredient Percent Cured Sprayed-Elastomer None 100% 3. HAZARD IDENTIFICATION Emergency Overview CAUTION: MAY CAUSE EYE, SKIN AND RESPIRATORY TRACT IRRITATION. Potential Health Effects Primary Routes of Exposure: Routes of entry for solids and liquids include eye and skin contact, ingestion and inhalation. Routes of entry for gases include inhalation and eye contact. Skin contact may be a route of entry for liquefied gases. Acute Toxicity: Ingestion may cause gastrointestinal disturbances..

Irritation: Irritating to respiratory system. Irritating to eyes and skin. Repeated Dose Toxicity: Causes irritation, a burning sensation of the mouth, throat and gastrointestinal tract and abdominal pain. Medical Effects Aggravated by Overexposure: Data available do not indicate that there are medical conditions that are generally recognized as being aggravated by exposure to this substance/product. 4. FIRST-AID MEASURES General Advice: Remove contaminated clothing. If Inhaled: After inhalation of decomposition products, remove the affected person to a source of fresh air and keep calm. Provide medical aid. If on Skin: Wash affected areas thoroughly with soap and water. If irritation develops, seek medical attention. If in Eyes: In case of contact with the eyes, rinse immediately for at least 15 minutes with plenty of water. Immediate medical attention required. If Swallowed: Rinse mouth and drink plenty of water. Do not induce vomiting. Never induce vomiting or give anything by mouth if the victim is unconscious or having convulsions. Immediate medical attention required. 5. FIRE-FIGHTING MEASURES Suitable Extinguishing Measures: Water, dry extinguishing media, carbon monoxide, foam Hazards during Fire-Fighting: If product is heated above decomposition temperature, toxic vapors will be released.

Protective Equipment for Fire-Fighting: Fire-fighters should be equipped with self-contained breathing apparatus and turnout gear. 6. ACCIDENTAL RELEASE MEASURES Cleanup: Place into a suitable container for disposal. See MSDS section 13 Disposal Consideration. 7. HANDLING AND STORAGE Handling Protection against Fire and Explosion: No explosion proofing necessary. Storage General Advice: Avoid disposition of dust. No special precautions necessary. Storage Stability: No data available. 8. EXPOSURE CONTROLS AND PERSONAL PROTECTION Advice on System Design: Provide local exhaust ventilation to control dust. Personal Protective Equipment Respiratory Protection: Wear a NIOSH-certified (or equivalent) organic vapor/particulate respirator as needed. Hand Protection: Wear gloves. Eye Protection: Wear face shield or tightly fitting safety goggles (chemical goggles) if splashing hazard exists. General Safety and Hygiene Measures: Handle in accordance with good industrial hygiene and safety practice. Wash soiled clothing immediately.

9. PHYSICAL AND CHEMICAL PROPERTIES Form: Solid. Odor: Unspecified. Color: No data available. Miscibility with water: Not Soluble. 10. STABILITY AND REACTIVITY Conditions to Avoid: >300 degrees Fahrenheit. Avoid extreme heat. Avoid all sources of ignition: heat, sparks, open flame. Hazardous Reactions: The product is chemically stable. Decomposition Products: Hazardous decomposition products: carbon monoxide, carbon dioxide, hydrogen cyanide, ether, esters, ketones. Thermal Decomposition: No data available. Corrosion to Metal: No corrosive effect on metal. 11. TOXICOLOGICAL INFORMATION 12. ECOLOGICAL INFORMATION 13. DISPOSAL CONSIDERATIONS Waste Disposal of Substance: Dispose of in a licensed facility. Container Disposal: Incinerate or dispose of in a licensed facility. 14. TRANSPORT INFORMATION Land Transport: USDOT Not classified as a dangerous good under transportation regulations. Sea Transport: IMDG Not classified as a dangerous good under transportation regulations. Air Transport: IATA/ICAO Not classified as a dangerous good under transportation regulations.

15. REGULATORY INFORMATION Federal Regulations Registration Status: TSCA, US Released/listed. 16. OTHER INFORMATION HMIS III Rating: Health: 1 Flammability: 1 Physical Hazard: 0 HMIS uses a numbering scale ranging from 0 to 4 to indicate the degree of hazard. A value of zero means that the substance possesses essentially no hazard; a rating of four indicates high hazard. Local contact information: Andrew Huber Andrew@bulletliner.com IMPORTANT: WHILE THE DESCRIPTIONS, DESIGNS, DATA AND INFORMATION CONTAINEDHEREIN ARE PRESENTED IN GOOD FAITH AND BELIEVED TO BE ACCURATE, IT IS PROVIDED FOR YOUR GUIDANCE ONLY. BECAUSE MANY FACTORS MAY AFFECT PROCESSING OR APPLICATION/USE, WE RECOMMEND THAT YOU MAKE TESTS TO DETERMINE THE SUITABILITY OF A PRODUCT FOR YOUR PARTICULAR PURPOSE PRIOR TO USE. NO WARRANTIES OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING WARRANTIES OF MERCHANT ABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE MADE REGARDING PRODUCTS DESCRIBED OR DESIGNS, DATA OR INFORMATION SET FORTH, ORTHAT THE PRODUCTS, DESIGNS, DATA OR INFORMATION MAY BE USED WITHOUTINFRINGING THE INTELLECTUAL PROPERTY RIGHTS OF OTHERS. IN NO CASE SHALL THEDESCRIPTIONS, INFORMATION, DATA OR DESIGNS PROVIDED BE CONSIDERED A PART OFOUR TERMS AND CONDITIONS OF SALE. FURTHER, YOU EXPRESSLY UNDERSTAND ANDAGREE THAT THE DESCRIPTIONS, DESIGNS, DATA, AND INFORMATION FURNISHED BY BPL HEREUNDER ARE GIVEN GRATIS AND BPL ASSUMES NO OBLIGATION OR LIABILITY FOR THE DESCRIPTION, DESIGNS, DATA AND INFORMATION GIVEN OR RESULTS OBTAINED, ALL SUCH BEING GIVEN AND ACCEPTED AT YOUR RISK. BPL WILL NOT MAKE ITS PRODUCTS AVAILABLE TO CUSTOMERS FOR USE IN THE MANUFACTURE OF MEDICAL DEVICES WHICH ARE INTENDED FOR PERMANENT IMPLANTATION IN THE HUMAN BODY OR IN PERMANENT CONTACT WITH INTERNAL BODILY TISSUES OR FLUIDS.