MATERIAL SAFETY DATA SHEET

Similar documents
MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET U.S. DEPARTMENT OF LABOR Occupational Safety and Health Administration (Prepared According to 29 CFR 1910.

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

Chemical Name: Germ-Bac. Manufacturer: Brady. Container size: 15.5 OZ. Location: VLA. Disposal: Place empty container in trash.

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

Material Safety Data Sheet

(800) Miller-Stephenson Chemical 55 Backus Ave. Danbury, Conn USA (203)

Section I - Product and Company Identification. Section II - Hazardous Information

MATERIAL SAFETY DATA SHEET

SAFETY DATA SHEET SSS FOAMCLEAN ASCEND 62 INSTANT HAND SANITIZER. GHS SDS F688F Page 1 of 6 SECTION 1 PRODUCT AND COMPANY IDENTIFICATION

SAFETY DATA SHEET MADAGEL INSTANT HAND SANITIZER

SAFETY DATA SHEET (800) (800) Category 2 Category 2A

1. Product And Company Identification

Product Name: Phone: Items: Formula Code:

SAFETY DATA SHEET (800) (800) Category 2 Category 2A

SAFETY DATA SHEET (800) (800) Category 3 Category 2A

Total Systems Technology Inc. Address 65 Terence Drive, Pittsburgh, PA Phone Number Emergency Phone Number

MATERIAL SAFETY DATA SHEET

- TECHNICHEM CHEMICAL MANUFACTURING 1004 E. RAYMOND AVE ANAHEIM, CA TEL: FAX:

Issue Date: 13-Dec-2012 Revision Date: 10-APR-2015 Version 2 1. IDENTIFICATION. United 432 PHASER GLASS BLAST. Concentrated glass cleaner.

SAFETY DATA SHEET (800) (800)

FIRST AID - SKIN CONTACT: IF ON SKIN: Gently wash with plenty of Soap and Water. If skin irritation occurs: Get medical advice/ attention.

SAFETY DATA SHEET. Section 1. IDENTIFICATION

SAFETY DATA SHEET (800)

Safety Data Sheet. HD Citra-Solv. Section 1 Identification. Section 2 Hazards Identification. Section 3 Composition. Section 4 First Aid

AST CONTACT CLEANER, FLAMMABLE Aerosol SAFETY DATA SHEET Section 1- Product and Company Identification

Material Safety Data Sheet

1. IDENTIFICATION. WipesPlus Patient Washcloths. INFOTRAC (International) (North America) 2. HAZARDS IDENTIFICATION

MATERIAL SAFETY DATA SHEET

SAFETY DATA SHEET Confirms to OSHA Hazard Communication Standard (CFR ) HazCom 2012

MATERIAL SAFETY DATA SHEET

Version 5.0 Print Date 02/12/2013 REVISION DATE: 02/11/2013

MATERIAL SAFETY DATA SHEET

SAFETY DATA SHEET. Section 1. IDENTIFICATION

DURAL 435 PART A Version 3.0 Print Date 01/27/2015 REVISION DATE: 07/08/2012

MATERIAL SAFETY DATA SHEET

SAFETY DATA SHEET (800) (800)

RAID ANT KILLER LIQUID (REG NO P.C.P. ACT)

Issue Date: 16-Feb-2012 Revision Date: 24-Feb-2015 Version 2 1. IDENTIFICATION. United 894 ZYME-OUT. For industrial and institutional use only.

Safety Data Sheet SUREPREP SKIN PROTECTANT WIPE

Material Safety Data Sheet

Material Safety Data Sheet

Safety Data Sheet 1818BR

Safety Data Sheet EPI-CLENZ FOAMING INSTANT HAND SANITIZERS

Material Safety Data Sheet

Safety Data Sheet 1565BR

AST PENETRANT II SAFETY DATA SHEET Section 1- Product and Company Identification

Issuing Date No data available Revision Date 1-June 2015 Revision Number 0 1. IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND THE COMPANY/UNDERTAKING

3. COMPOSITION / INFORMATION ON INGREDIENTS

Date Printed: 2/17/2019 Product: M UPHOLSTERY/FABRIC CLEANER. Surface Preparation or Protection

Product Name: Items: Formula Code: SDS Revision Date:

Issue Date: 09-Jan-2013 Revision Date: 06-Feb-2017 Version Number: Identification. 2. Hazards Identification

Transcription:

MATERIAL SAFETY DATA SHEET 1. Product and Company Identification Product number 45428869 162-002 Product name PRO-SOURCE Cinnamon Air Freshener CINNAMON & DRY Deodorizer AIR FRESHENER & DEODORIZER Effective date 31-Aug-2010 Manufactured for MSC Claire Industrial Manufacturing Supply Co. Co. Manufacturer: Sprayway, Inc. 500 75 Maxess Vista Ave. Road 1005 Westgate Avenue Addison, Melville, NY IL 60101 11747 United States Addison, IL 60101 Company phone 1-800-332-9000 Emergency telephone US 1-866-836-8855 800-424-9300 Emergency telephone outside US 703-527-3887 Version # 05 Supersedes date 04-Mar-2010 630-543-7600 2. Hazards Identification Emergency overview Potential health effects Eyes Skin Inhalation Ingestion Target organs Chronic effects Signs and symptoms FLAMMABLE Aerosol. CONTENTS UNDER PRESSURE. Will be easily ignited by heat, spark or flames. Prolonged exposure may cause chronic effects. Contact with eyes may cause irritation. Prolonged or repeated contact can result in defatting and drying of the skin which may result in skin irritation and dermatitis (rash). Intentional misuse by concentrating and inhaling the product can be harmful or fatal. Prolonged inhalation may be harmful. Exposure by ingestion of an aerosol is unlikely. May cause delayed lung damage. Components of the product may be absorbed into the body by ingestion. Lungs. May cause delayed lung damage. Prolonged skin contact may defat the skin and produce dermatitis. Discomfort in the chest. Defatting of the skin. Irritation. 3. Composition / Information on Ingredients Components CAS # Percent n-hazardous and other components below reportable levels 4. First Aid Measures 106-97-8 60-70 15-20 10-15 1-2.5 First aid procedures Eye contact Skin contact Inhalation Ingestion Flush eyes immediately with large amounts of water. Remove contact lenses, if present and easy to do. Continue rinsing. Get medical attention if irritation develops or persists. Immediately take off all contaminated clothing. Wash off with warm water and soap. Get medical attention if irritation develops or persists. Move to fresh air. If symptoms persist, get medical attention. Have victim rinse mouth thoroughly with water. If vomiting occurs naturally, have victim lean forward to reduce risk of aspiration. Do not use mouth-to-mouth method if victim ingested the substance. Induce artificial respiration with the aid of a pocket mask equipped with a one-way valve or other proper respiratory medical device. In the unlikely event of swallowing contact a physician or poison control center. Product name: PRO-SOURCE CINNAMON DRY AIR FRESHENER & DEODORIZER Product #: 162-002 Cinnamon Revision Air Freshener date: 31-AUG-2010 & Deodorizer Print date: 31-AUG-2010 1 / 5

5. Fire Fighting Measures Flammable properties Extinguishing media Suitable extinguishing media Protection of firefighters Protective equipment and precautions for firefighters Vapor or gas may spread to distant ignition sources and flash back. Runoff to sewer may cause fire or explosion hazard. Alcohol foam. Dry chemical. Carbon dioxide (CO2). Do not use water jet. In the event of fire and/or explosion do not breathe fumes. Wear full protective clothing, including helmet, self-contained positive pressure or pressure demand breathing apparatus, protective clothing and face mask. Containers should be cooled with water to prevent vapor pressure build up. For massive fire, use unmanned hose holders or monitor nozzles; if this is impossible, withdraw from area and let fire burn. 6. Accidental Release Measures Methods for containment Methods for cleaning up Eliminate all ignition sources (no smoking, flares, sparks, or flames in immediate area). Stop leak if you can do so without risk. Move the cylinder to a safe and open area if the leak is irreparable. Stop the flow of material, if this is without risk. Prevent entry into waterways, sewers, basements or confined areas. Should not be released into the environment. Use a non-combustible material like vermiculite, sand or earth to soak up the product and place into a container for later disposal. Small Spills: Wipe up with absorbent material (e.g. cloth, fleece). Clean contaminated surface thoroughly. 7. Handling and Storage Handling Storage Pressurized container: Do not pierce or burn, even after use. Do not handle or store near an open flame, heat or other sources of ignition. Do not smoke while using or until sprayed surface is thoroughly dry. Do not use if spray button is missing or defective. Use only with adequate ventilation. Do not get this material in contact with eyes. Do not get this material in contact with skin. Avoid prolonged exposure. Level 3 Aerosol. Contents under pressure. Do not puncture, incinerate or crush. The pressure in sealed containers can increase under the influence of heat. Keep away from heat, sparks, and flame. Avoid exposure to long periods of sunlight. Store in cool place. Keep in an area equipped with sprinklers. Keep out of the reach of children. Level 3 Aerosol. Do not store, incinerate, or heat this material above 120 degrees Fahrenheit. 8. Exposure Controls / Personal Protection Exposure limits ACGIH Components CAS # TWA STEL Ceiling 500 ppm 750 ppm 106-97-8 OSHA Components CAS # TWA STEL Ceiling Personal protective equipment Eye / face protection Skin protection Respiratory protection t normally needed. Wear appropriate chemical resistant gloves. Wear appropriate chemical resistant clothing. When workers are facing concentrations above the exposure limit they must use appropriate certified respirators. If permissible levels are exceeded use NIOSH mechanical filter / organic vapor cartridge or an air-supplied respirator. 2 / 5

9. Physical & Chemical Properties Appearance Boiling point Color Flammability (HOC) Flash back Flash point Form Odor ph Physical state Pressure Solubility Specific gravity Compressed liquefied gas. 77 F (25 C) estimated Pale yellow 32.53 kj/g estimated -156 F (-104.4 C) Propellant Aerosol. Characteristic. t applicable Liquid. 60-70 psig @70 F Completely 0.6949 estimated Chemical stability Conditions to avoid 10. Chemical Stability & Reactivity Information Risk of ignition. Heat, flames and sparks. Hazardous decomposition products hazardous decomposition products are known. Acute effects Component analysis - LD50 Toxicology Data - Selected LD50s and LC50s Sensitization Teratogenicity 11. Toxicological Information Acute LD50: 29401 mg/kg estimated, Rat, Dermal Oral LD50 Rat 5800 mg/kg 106-97-8 Inhalation LC50 Rat 658 mg/l 4 h Inhalation LC50 Rat 658 mg/l 4 h t expected to be hazardous by OSHA criteria. t expected to be hazardous by OSHA criteria. 12. Ecological Information Ecotoxicity LC50 8121 mg/l estimated, Fish, 96.00 Hours, EC50 19781 mg/l estimated, Daphnia, 48.00 Hours, Components of this product have been identified as having potential environmental concerns. 13. Disposal Considerations Waste codes Disposal instructions D001: Waste Flammable material with a flash point <140 F Contents under pressure. Dispose of this material and its container at hazardous or special waste collection point. Do not incinerate sealed containers. Do not allow this material to drain into sewers/water supplies. If discarded, this product is considered a RCRA ignitable waste, D001. Dispose in accordance with all applicable regulations. 14. Transport Information Department of Transportation (DOT) Requirements Proper shipping name Consumer commodity ORM-D Subsidiary hazard class ne Packaging exceptions 156, 306 Packaging non bulk 156, 306 Packaging bulk ne 3 / 5

IMDG Proper shipping name UN number Packaging exceptions Labels required AEROSOLS 1950 LTD QTY ne IATA Proper shipping name UN number Packaging exceptions Labels required Aerosols, flammable 1950 LTD QTY US federal regulations Occupational Safety and Health Administration (OSHA) 29 CFR 1910.1200 hazardous Yes chemical CERCLA (Superfund) reportable quantity : 5000.0000 15. Regulatory Information Superfund Amendments and Reauthorization Act of 1986 (SARA) Section 302 extremely hazardous substance Section 311 hazardous chemical Yes Hazard categories (311/312) Inventory status This product is a "Hazardous Chemical" as defined by the OSHA Hazard Communication Standard, 29 CFR 1910.1200. Immediate Hazard - Yes Delayed Hazard - Fire Hazard - Yes Pressure Hazard - Yes Reactivity Hazard - Country(s) or region Inventory name On inventory (yes/no)* China Inventory of Existing Chemical Substances in China (IECSC) Europe European Inventory of New and Existing Chemicals (EINECS) Europe Japan Korea United States & Puerto Rico European List of tified Chemical Substances (ELINCS) Inventory of Existing and New Chemical Substances (ENCS) Existing Chemicals List (ECL) Toxic Substances Control Act (TSCA) Inventory A "Yes" indicates that all components of this product comply with the inventory requirements administered by the governing country(s) State regulations U.S. - Pennsylvania - RTK (Right to Know) List Environmental hazard 106-97-8 Present Present 16. Other Information Yes Further information HMIS ratings Health: 1 Flammability: 4 Physical hazard: 0 HMIS is a registered trade and service mark of the NPCA. 4 / 5

Disclaimer MSDS sections updated Prepared by The information provided in this Safety Data Sheet is correct to the best of our knowledge, information and belief at the date of its publication. The information given is designed only as a guidance for safe handling, use, processing, storage, transportation, disposal and release and is not to be considered a warranty or quality specification. The information relates only to the specific material designated and may not be valid for such material used in combination with any other materials or in any process, unless specified in the text. Regulatory Information: State regulations Regulatory Compliance 5 / 5