09/2014 R O T FLEXILE S U SEIL- UND HEETECHNIK GMH List of Material Rope Courses DR.-KARL-LENZ-STRASSE 66 D-87700 MEMMINGEN TELEPHONE +49 (0) 83 31-937-267 TELEFAX +49 (0) 83 31-937-341 E-MAIL wireropes@pfeifer.de INTERNET www.pfeifer.de
-List of Material Rope Courses Special products for a safe and economical operation of rope courses ased on our year long experience by supplying rope courses we set up the following list of material. The listed products are proving themself since years in several rope courses under all sorts of conditions worldwide. Special Rope PN116/7 Wire surface: galvanized Class, dry Minimum reaking Force: 69.8 kn Nominal Tensile Strength: 1960 N/mm² Lay direction: Ordinary lay Right hand Non-twisting Resistant against lateral pressure Special Rope P355 Wire surface: galvanized class Minimum reanking Force: 136,95 kn Nominal Tensile Strength: 1960 N/mm² Lay direction: Ordinary lay, Right hand R o b u s t Stabel at bending cycles Very less rolling noise if used as zip line D r y Galvanized class new! Life Line Flying-Fox-/Zipline-Ropes new! Rope- Min. reaking diameter Force 10 mm 69.80 159759 12 mm 100.00 251842 Rope- Min. reaking diameter Force 10 mm 99,29 235842 12 mm 140,75 235843 15 mm 210,65 238087 R O T FLEXILE S U
Fibre Ropes Polyamid Rope twisted DIN EN 696 Shape:A Color: white Diámetro nominal Referencia-No. 12 mm 105460 16 mm 105474 20 mm 105488 24 mm 105500 Duracord Finish: twisted 4-legs 20 mm 169109 Finish: twisted 3-legs 16 mm 169108 Polyamid Rope braided DIN/EN 83307 Shape: E 8 mm 145219 10 mm 163127 Accessories Oval Ring Dimension A: 13.0 mm Dimension : 60.0 mm Dimension C: 120.0 mm Finish: painted Working load 2500 kg 112717 C A Chain Fast Lock Finish: Steel, galvanized Dimension D 8 mm 150429 10 mm 151190 12 mm 154917 G D H Round Steel Chain Short link in 30m coil DIN766 Galvanized True to gauge, tested Chain dimensions d x t: 8 x 24 mm Chains complying with this standardare used in the entire technical field. Short link 201729 d t Round Steel Chain Long link in 30m coil DIN766 Galvanized Dimensionally untested Chain dimensions d x t: 8 x 52 mm Chains for non-lifting applications e.g. bracing, fastening, closing off Long link 120580 d t
Accessories Thimble DIN 6899 Shape: F 9 mm 111329 11 mm 111330 Special thimble Dimension c: 45 mm Dimension l: 72 mm 12 mm 111577 c I Wire rope clamp Acc. EN 13411-5 Type A Nominal size 6.5 mm 111776 10.0 mm 111781 Typ auf Anfrage Wire rope clamp So Nominal size 13 mm 110985 Swaged ferrule Made of aluminium EN 13411-3 A Nominal size 11 mm 111122 Shackle High-strength Curved shape olt with nut and split pin Stirrup hot-dip galvanised, bolt painted 2000 kg 181523 3250 kg 112005 Turnbuckle with two forks and lock nuts High-tensile version, galvanised olt with nut 1000 kg 110728 2360 kg 110736 Turnbuckle with two eyes and lock nuts High-tensile version, galvanised 540 kg 222789 1000 kg 237427 Wedge clamp Wedge chamber made of steel, St. 50 Steel wedge, quenched and tempered Steel plunger Surface-hardened lack paint finish max. 10 kn 5 10 mm 198559 20 kn 10.5 14 mm 198561 Polytex - lashing strap One-piece, pink Strap width 25 mm 232002 Length: 0.3 m 20 m flexibel Further colours and length on request.
Accessories Polytex - DH round sling With double protective sleeve DIN 1492-2 Label can be covered Messmittel Rope caliper 40 With attached wide jaws Galvanized steel Part.-No. 0 40 mm 246658 Measurement equipment case 75 Content: Rope caliper 75 made of galvanized steel with attached wide jaws (see small picture) Recommended for the frequent measuring of ropes in the most common diameters Suitable groove gauges Screw acc. mentioned rope diameter range High quality PU-imprigenated Colour: green 2 t 122349 Length: 1.00 m; 1.25 m; 1.50 m; 1.75 m; 2.00 m; 2.25 m; 2.50 m; 2.75 m; 3.00 m; 4.00 m Recommended for frequent measurement of ropes with the most common diameters up to 40 mm Highest abrasion and break resistance through measure plates made of hardened steel Enables quick and easy check wide jaws avoid measuring faults Version Stored in included hard-shell carrying case versions! 7 4 t 122375 Colour: grey Length: 1.50 m; 1.75 m; 2.00 m; 2.25 m; 2.50 m; 2.75 m Combine your own measurement equipment case according to your needs Version Solid plastic case with manuals for rope caliper, groove gauges and wire ropes Including a table with recommended size of the grooves for each rope diameter, based on ISO 4308 5 28 mm 254854 5 60 mm 254853 versions!
Use our fast sevice and our professional guidance Just send a fax to +49 (0) 8331-937-341 or just send an E-Mail to wireropes@pfeifer.de I would like to get an offer for: High Performance Rope P355 12 mm 235843 new! High Performance Rope PN116/7 10 mm 159759 Caliper 40 0 40 mm 246658 Measurement Equipment Case 75 5 28 mm 254854 Measurement Equipment Case 75 5 60 mm 254853 Please send me your current Complett-Catalogue. I would like to be called by an expert. Company Address 09.14.pdf WA 269059 Contact, Position Telephone Telefax E-Mail Date / Sign SEIL- UND HEETECHNIK GMH DR.-KARL-LENZ-STRASSE 66 D-87700 MEMMINGEN TELEPHONE +49 (0) 83 31-937-267 TELEFAX +49 (0) 83 31-937-341 E-MAIL wireropes@pfeifer.de INTERNET www.pfeifer.de