SURVEY REPORT Project: MICE Hall Re-survey Date: December 2014 Staff: T Millington, A Hooper Equipment used: Leica AT401 Laser Tracker, 1.5 SMR, Spatial Analyzer software Reference Drawing Nos MICE-HALL-USMN-2012-06.xit (Spatial Analyzer file listing previously surveyed coordinates for fixed survey nests in MICE Hall, June 2012) TASK: Confirm existing survey nest network Survey positions of datum point D2 and centre of magnets Q4 Q9 The existing network consisting of fixed survey nests has been resurveyed. The survey was able to resurvey 101 of the fixed points listed in the June 2012 survey data. The Brass scribed plate located beneath Magnet D2 has been surveyed (Point M1 ), this point represents the origin of the MICE Beamline. Using a jig designed to fit the bore of the Quad Magnets (Q4, Q5, Q6, Q7, Q8 and Q9), points have been surveyed representing the physical centres of the magnets. (This jig is currently held by the ISIS Survey Section) The survey also re-measured two wall mounted brass plates set at the ISIS Synchrotron Tooling Height of 603mm. Page 1 of 12
Results The network of points measured with the AT401 has been computed using Spatial Analyzer software. The software bundles all the observations together and then computes a best-fit solution for the network (USMN-Unified Spatial Metrology Network). Having resolved the network, the average computed point error (residual) is 0.03mm, with a maximum error of 0.50mm at point ERP099, and with an overall RMS for point errors of 0.06mm. Spatial Analyzer also computes uncertainty values for all measured points, based on analysis of the network. The average value for the uncertainty magnitude is 0.10mm; the maximum calculated uncertainty value is 0.26mm (at point ERP205 ). After computing the survey data, the observed network has been checked against the original (2012) survey network. Using all 101 of the re-surveyed existing points, a Least Squares best-fit transformation was carried-out. This produced an overall RMS error of 0.48mm in fitting to the previous coordinates. A listing of results for the USMN and Best-fit transformation is included at Appendix A. In order to simplify future survey works, and to ensure ongoing consistency, the entire resurveyed network has been transformed to a new coordinate system. Page 2 of 12
The coordinate system is right-handed and has an origin (0,0) at M1. The x axis is orientated on a line from M1 (origin) to the x,y position of the centre of the magnet furthest from M1 (Q9). The x axis is horizontal, ie perpendicular to the z axis (gravity). The y axis is perpendicular to x (+ve y to south of hall). The z (vertical) axis is aligned to gravity, as defined by the Laser tracker inclination sensor, with z=0 at 603mm below ISIS Tooling Height. Final, definitive, coordinates for all surveyed network points are given at Appendix B and have also been supplied as a.csv format file (MICE Hall Definitive Network 2015.csv). The final Spatial Analyzer file for this survey has also been supplied for archive purposes (MICE Hall Resurvey 2015 Overall.xit64). Issued: Tony Millington Survey Section Leader R78 1.11 ISIS Accelerator Division Rutherford Appleton Laboratory Harwell Science and Innovation Campus, Didcot, OX11 0QX +44 (0) 1235 44 5053 Revision A Issued 28/01/2015 o Definition of Coordinate system clarified. Issued 16/02/2015 o Coordinate System z value changed to Beam Height = 0. Page 3 of 12
APPENDIX A USMN summary Spatial Analyzer Transformation Report (best-fit comparison 2012 survey to 2015 survey) Spatial Analyzer uncertainty analysis summary: USMN: Unified Spatial Metrology Network Point Error: Overall RMS = 0.06, Average = 0.03, Max = 0.50@ ERP099 Network Residuals by Instrument Components Horizontal Angle 2.304 Vertical Angle 1.145 Distance 0.044mm Uncertainty Magnitude: Average = 0.10, Max = 0.26 @ERP205 Page 4 of 12
Best-Fit Transformation (Summary) MICE-HALL-USMN-2012-06::USMN Composite to A::USMN Composite 10/12/2014 07:46:44 Results X Y Z Mag Count 101 101 101 101 Max Error 0.70 0.68 0.58 0.90 RMS Error 0.33 0.23 0.27 0.48 StdDev Error 0.33 0.23 0.27 0.48 Max Error (all) 0.70 0.68 0.58 0.90 RMS Error (all) 0.33 0.23 0.27 0.48 Unknowns 6 Equations 303 Transformation Translation 0.8500-1.1100-1666.6700 1666.6700 Rotation (Fixed 0.0000 0.0017 29.6100 Rotation (Euler x 29.6100 0.0015-0.0009 Rotation (Angle 0.0000 0.0001 1.0000 29.6100 Matrix 0.869409-0.494094 0.000026 0.850521 0.494094 0.869409 0.000015-1.107797-0.000030 0.000000 1.000000-1666.667255 0.000000 0.000000 0.000000 1.000000 Scale Factor 1.000000 Page 5 of 12
Best-Fit Transformation (Details) MICE-HALL-USMN-2012-06::USMN Composite to A::USMN Composite 10/12/2014 07:46:44 Name On Nom X Nom Y Nom Z Wt X Wt Y Wt Z dx dy dz dmag DSA2 X 1367.57 6326.08 235.90 1 1 1-0.26-0.18 0.00 0.32 DSA3 X 3777.58 4295.22-45.57 1 1 1-0.41-0.08 0.12 0.43 DSA4 X 5123.77 4964.88-49.46 1 1 1-0.20-0.13 0.32 0.40 ERP015 X -1892.65 2772.65 406.99 1 1 1-0.33 0.24-0.53 0.67 ERP016 X -536.29 3168.57 511.25 1 1 1-0.30-0.06-0.20 0.37 ERP022 X 35293.27 11658.34-211.10 1 1 1 0.70 0.22-0.41 0.84 ERP024 X 35067.26 18028.31-355.63 1 1 1 0.47 0.36-0.57 0.83 ERP026 X 32452.68 22635.77-148.58 1 1 1 0.35 0.43-0.58 0.80 ERP029 X 23481.57 18876.95-356.97 1 1 1 0.13 0.36-0.07 0.39 ERP030 X 21317.15 17642.83-95.49 1 1 1 0.02 0.21-0.10 0.23 ERP036 X 6678.10 9340.07 336.40 1 1 1-0.30 0.11 0.19 0.38 ERP053 X 7797.64 2093.33-588.46 1 1 1-0.29-0.21 0.21 0.41 ERP060 X 12741.30 11238.59 251.49 1 1 1-0.15 0.20 0.35 0.43 ERP064 X 13862.58 11866.41-1562.42 1 1 1 0.02-0.19 0.33 0.38 ERP065 X 15016.39 12523.29 224.13 1 1 1-0.08 0.26 0.31 0.41 ERP066 X 19018.37 14806.00-1880.02 1 1 1 0.07-0.06-0.02 0.09 ERP067 X 20095.54 15417.77-1633.88 1 1 1 0.15-0.01-0.04 0.16 ERP075 X 6264.03 4635.46 595.41 1 1 1-0.22-0.09 0.34 0.41 ERP076 X 6281.39 4619.75-533.41 1 1 1-0.18-0.09 0.38 0.43 ERP078 X 9599.47 9457.03-1090.47 1 1 1-0.24 0.09 0.35 0.43 ERP079 X 10660.73 10064.74 179.55 1 1 1-0.18 0.05 0.36 0.40 ERP080 X 11742.09 10670.67-1524.11 1 1 1-0.14 0.03 0.29 0.32 ERP081 X 16139.68 13162.24-1594.19 1 1 1 0.47-0.60 0.25 0.80 ERP082 X 19076.85 14839.00 367.48 1 1 1 0.12 0.03 0.12 0.17 ERP083 X 20041.79 15389.46-390.30 1 1 1 0.06 0.24 0.05 0.25 ERP084 X 21210.13 16050.99 365.23 1 1 1 0.12 0.30 0.06 0.33 ERP085 X 12676.81 1663.20-1425.42 1 1 1-0.08-0.16 0.27 0.32 ERP086 X 13735.08 2268.92 604.27 1 1 1-0.05-0.16 0.36 0.39 ERP087 X 14794.10 2869.94-1492.46 1 1 1-0.03-0.07 0.31 0.32 ERP088 X 15857.75 3473.05 594.68 1 1 1 0.03-0.09 0.37 0.38 ERP089 X 16924.70 4079.66-1498.29 1 1 1 0.01-0.08 0.23 0.25 ERP090 X 17987.66 4686.18 614.35 1 1 1 0.14-0.05 0.32 0.36 ERP091 X 19253.85 5411.85-1517.67 1 1 1 0.25-0.18 0.20 0.36 ERP092 X 20674.94 6222.15-80.12 1 1 1 0.27-0.04 0.22 0.35 ERP094 X 23044.04 7566.40-145.89 1 1 1 0.52-0.03 0.16 0.54 ERP095 X 23878.81 8039.05-1545.46 1 1 1 0.49 0.02 0.09 0.49 ERP096 X 24779.58 8893.27 542.89 1 1 1 0.58 0.03 0.15 0.60 ERP097 X 26050.19 9609.71-1506.53 1 1 1 0.64 0.01-0.06 0.64 ERP099 X 36110.69 16180.69 1874.24 1 1 1 0.61 0.50-0.43 0.90 Page 6 of 12
ERP100 X 20671.76 6217.55 549.40 1 1 1 0.31-0.06 0.25 0.40 ERP101 X 23045.08 7567.82 541.60 1 1 1 0.42-0.01 0.20 0.47 ERP102 X 17026.76 13671.80 416.24 1 1 1 0.05 0.16 0.20 0.26 ERP103 X 17949.58 14199.67-385.71 1 1 1 0.13 0.05 0.14 0.20 ERP104 X 22243.38 16631.85-352.97 1 1 1 0.18 0.28 0.04 0.34 ERP105 X 24738.74 15275.88-1104.23 1 1 1 0.26 0.19 0.01 0.32 ERP106 X 24723.10 15293.19 425.56 1 1 1 0.37 0.36 0.07 0.52 ERP107 X 25793.97 13425.89 416.28 1 1 1 0.10 0.16 0.10 0.22 ERP108 X 25790.92 13424.53-1094.49 1 1 1 0.23 0.08-0.04 0.25 ERP109 X 25902.99 13396.88 482.50 1 1 1 0.08 0.14 0.14 0.22 ERP110 X 26601.93 13823.09-1185.01 1 1 1 0.39 0.10-0.04 0.40 ERP111 X 26640.19 13926.68 517.84 1 1 1 0.25 0.00 0.09 0.27 ERP112 X 26630.60 13934.43-1133.95 1 1 1 0.38 0.11 0.01 0.40 ERP113 X 25594.81 15743.00 507.00 1 1 1 0.42 0.27 0.03 0.50 ERP114 X 25600.35 15746.62-1119.91 1 1 1 0.32 0.21-0.04 0.38 ERP115 X 25487.22 15777.73 402.77 1 1 1 0.41 0.28 0.03 0.50 ERP116 X 24771.64 15378.92-1213.04 1 1 1 0.26 0.21-0.01 0.34 ERP117 X 6073.84 2263.14 897.89 1 1 1-0.22-0.62-0.02 0.66 ERP118 X 2865.21 181.97 650.13 1 1 1-0.55-0.45-0.20 0.73 ERP119 X 828.52-971.49 620.78 1 1 1-0.63-0.23-0.33 0.74 ERP120 X -338.83-1625.69 207.41 1 1 1-0.65-0.08-0.40 0.76 ERP121 X 1072.30 1908.82-918.08 1 1 1-0.31-0.19-0.09 0.37 ERP122 X 31.45 3476.43-592.36 1 1 1-0.20-0.06-0.12 0.24 ERP124 X -1491.53-2287.09-801.73 1 1 1-0.69 0.11-0.48 0.85 ERP125 X 11210.28 5476.42-1618.42 1 1 1-0.03-0.08 0.25 0.26 ERP126 X 10450.01 6819.67-1619.60 1 1 1-0.05-0.01 0.35 0.36 EXT1 X 5034.93 1412.13 586.41 1 1 1-0.29-0.68-0.05 0.73 EXT2 X 1699.85-570.00-1659.66 1 1 1-0.45-0.17-0.20 0.52 EXT3 X -660.25-1832.85-1660.02 1 1 1-0.57 0.06-0.43 0.72 EXT4 X 502.11 2760.84-1667.14 1 1 1-0.18 0.01-0.11 0.22 EXT5 X 84.32 3476.11-1668.74 1 1 1-0.16 0.01-0.11 0.19 EXT6 X -2710.94 2247.82-1667.53 1 1 1-0.18 0.16-0.30 0.38 EXT7 X -1653.78 3036.21 261.10 1 1 1-0.28-0.02-0.35 0.44 EXT8 X -1864.35 3855.29 93.06 1 1 1-0.20-0.02-0.22 0.30 EXT9 X -1344.43 4149.13-1673.08 1 1 1-0.14 0.05-0.14 0.20 EXT11 X 704.61 5954.75-1082.27 1 1 1-0.05-0.16-0.01 0.17 EXT12 X 2012.18 6695.68-788.60 1 1 1-0.17-0.14 0.08 0.23 EXT13 X -1684.02 3960.32-1385.06 1 1 1-0.14 0.06-0.17 0.23 EXT14 X -1031.56 4331.09-0.48 1 1 1-0.21-0.04-0.15 0.27 EXT15 X 237.30 3262.86-991.79 1 1 1-0.19-0.05-0.11 0.22 EXT16 X 961.47 1972.76-312.19 1 1 1-0.28-0.10-0.14 0.33 EXT18 X -2000.63 3657.55-567.18 1 1 1-0.20 0.00-0.28 0.35 Page 7 of 12
MAG-4-DS X 2258.39 416.25 35.22 1 1 1-0.48-0.36-0.20 0.63 MAG-4-US X 1726.36 114.23 34.70 1 1 1-0.53-0.32-0.21 0.65 MAG-5-DS X 3375.88 1052.06 8.54 1 1 1-0.47-0.47-0.14 0.68 MAG-5-US X 2575.36 601.10 1.76 1 1 1-0.55-0.42-0.19 0.71 MAG-6-DS X 4388.83 1627.73-1.83 1 1 1-0.39-0.52-0.05 0.65 MAG-6-US X 3581.87 1167.86 7.18 1 1 1-0.47-0.49-0.14 0.70 MH01 X 10275.91 4368.45-1673.57 1 1 1-0.11-0.15 0.18 0.26 MH05 X 17023.76 7518.99-1673.03 1 1 1 0.14-0.10 0.58 0.60 MH07 X 13474.58 9791.55-1684.74 1 1 1-0.25 0.13 0.38 0.47 MH08 X 12207.74 9074.30-1688.49 1 1 1-0.08-0.04 0.39 0.40 MH09 X 10727.92 8229.64-1689.84 1 1 1-0.03-0.13 0.53 0.55 MH10 X 8771.27 7051.13-1686.35 1 1 1-0.12 0.05 0.29 0.32 MH13 X 24115.77 16781.82-2362.75 1 1 1 0.18 0.20-0.05 0.28 MH14 X 26098.94 17457.12-2360.56 1 1 1 0.20 0.23-0.09 0.31 MH16 X 31912.38 20737.33-2383.31 1 1 1 0.37 0.38-0.39 0.66 MH17 X 32938.87 18980.93-2376.26 1 1 1 0.35 0.31-0.42 0.64 MH20 X 34697.37 14368.34-2365.06 1 1 1 0.51 0.19-0.48 0.73 MH21 X 33357.28 13622.76-2358.21 1 1 1 0.45 0.24-0.43 0.67 MH22 X 31555.89 12626.74-2366.03 1 1 1 0.49 0.12-0.38 0.63 MH23 X 29654.59 11553.98-2368.52 1 1 1 0.47 0.05-0.31 0.56 Page 8 of 12
APPENDIX B Final, definitive, coordinates for MICE Hall Survey Network Final Co-ordinates Uncertainty Values Point Name X Y Z Ux Uy Uz Mag 603 TOOLING LINE -3187.26-791.97 137.31 0.10 0.22 0.06 0.25 603 TOOLING LINE1 1532.09 4821.83 137.39 0.04 0.15 0.14 0.21 BEAMSTOP NEST 29069.12 4.37-224.06 0.02 0.02 0.03 0.05 BEAM STOP TAPE 29102.94 0.23-0.69 0.03 0.05 0.05 0.08 DH1 17659.69-1565.55-1676.56 0.01 0.02 0.02 0.03 DH2 18329.98-1567.63-1677.09 0.02 0.02 0.02 0.03 DH3 14485.85-1562.95-1639.15 0.02 0.02 0.02 0.04 DH4 15036.27-1563.50-1639.24 0.02 0.02 0.02 0.03 DH5 15584.67-1564.64-1635.53 0.01 0.02 0.02 0.03 DH6 16253.83-1565.13-1639.33 0.01 0.02 0.02 0.03 DSA2 4315.36 4824.38 234.34 0.04 0.11 0.11 0.16 DSA3 5407.82 1868.38-47.01 0.00 0.00 0.00 0.00 DSA4 6909.26 1785.65-50.70 0.03 0.08 0.07 0.12 ERP001-3170.95-503.73 568.45 0.09 0.21 0.06 0.24 ERP003 1896.43 1138.39 589.28 0.07 0.14 0.04 0.16 ERP015-274.34 3345.19 404.90 0.04 0.17 0.12 0.21 ERP016 1100.47 3019.29 509.48 0.04 0.15 0.09 0.18 ERP021 34502.22-7301.52-1415.56 0.04 0.04 0.06 0.08 ERP022 36449.14-7294.87-213.07 0.02 0.04 0.05 0.07 ERP023 39396.52-4256.17-275.89 0.02 0.05 0.06 0.08 ERP024 39398.57-1644.18-357.77 0.02 0.05 0.06 0.08 ERP025 39399.78-16.28-1635.76 0.03 0.05 0.06 0.09 ERP026 39400.65 3653.56-150.72 0.03 0.05 0.07 0.09 ERP029 29743.39 4815.99-358.60 0.02 0.03 0.05 0.06 ERP030 27251.68 4811.81-97.15 0.02 0.03 0.05 0.06 ERP036 10421.68 4822.56 335.03 0.03 0.05 0.06 0.09 ERP053 7815.90-2031.86-589.81 0.02 0.03 0.04 0.05 ERP060 16631.62 3478.80 250.28 0.02 0.01 0.04 0.04 ERP064 17916.63 3470.49-1563.65 0.02 0.01 0.04 0.04 ERP065 19244.45 3472.25 222.88 0.02 0.01 0.03 0.04 ERP066 23851.65 3480.22-1881.59 0.02 0.02 0.04 0.05 ERP067 25090.52 3480.16-1635.48 0.02 0.02 0.04 0.05 Page 9 of 12
ERP075 7738.05 936.07 594.18 0.03 0.08 0.07 0.11 ERP076 7745.42 913.83-534.59 0.04 0.07 0.07 0.11 ERP077 11772.96 3485.11 199.13 0.02 0.01 0.04 0.04 ERP078 13019.69 3481.36-1091.69 0.02 0.01 0.04 0.04 ERP079 14242.65 3485.57 178.34 0.02 0.01 0.04 0.04 ERP080 15482.22 3478.33-1525.38 0.02 0.01 0.04 0.04 ERP081 20536.81 3472.02-1595.50 0.02 0.01 0.04 0.04 ERP082 23918.89 3480.08 366.04 0.02 0.02 0.04 0.05 ERP083 25029.85 3482.35-391.81 0.02 0.02 0.04 0.05 ERP084 26372.55 3480.55 363.73 0.02 0.02 0.04 0.05 ERP085 11846.22-4815.71-1426.71 0.01 0.02 0.02 0.03 ERP086 13065.59-4811.72 603.06 0.01 0.01 0.01 0.02 ERP087 14283.33-4812.08-1493.71 0.01 0.01 0.01 0.02 ERP088 15506.11-4813.05 593.48 0.01 0.01 0.01 0.01 ERP089 16733.44-4812.53-1499.62 0.01 0.01 0.01 0.02 ERP090 17957.39-4810.17 613.11 0.01 0.01 0.01 0.02 ERP091 19416.81-4804.70-1519.03 0.04 0.03 0.05 0.07 ERP092 21052.76-4801.89-81.46 0.01 0.01 0.01 0.02 ERP093 22529.77-4801.81-1536.28 0.01 0.01 0.01 0.02 ERP094 23776.89-4803.24-147.30 0.01 0.01 0.01 0.02 ERP095 24736.18-4804.47-1546.93 0.02 0.02 0.02 0.03 ERP096 25941.40-4506.63 541.48 0.01 0.02 0.02 0.03 ERP097 27400.11-4511.27-1508.14 0.01 0.02 0.02 0.03 ERP098 39265.17-7307.04-95.44 0.03 0.05 0.06 0.08 ERP099 39393.52-3766.02 1872.25 0.03 0.05 0.06 0.08 ERP100 21047.76-4804.36 548.09 0.01 0.01 0.01 0.02 ERP101 23778.42-4802.45 540.25 0.01 0.01 0.01 0.02 ERP102 21559.82 3477.84 414.89 0.02 0.01 0.04 0.04 ERP103 22622.96 3480.93-387.12 0.02 0.01 0.04 0.04 ERP104 27557.91 3475.26-354.49 0.02 0.02 0.04 0.05 ERP105 29058.01 1063.66-1105.79 0.02 0.03 0.04 0.05 ERP106 29053.14 1086.52 424.07 0.02 0.02 0.04 0.05 ERP107 29061.71-1066.07 414.82 0.02 0.02 0.03 0.04 ERP108 29058.46-1065.87-1096.09 0.02 0.03 0.03 0.05 ERP109 29142.15-1145.14 481.08 0.02 0.02 0.03 0.04 ERP110 29960.64-1119.94-1186.61 0.02 0.03 0.03 0.05 Page 10 of 12
ERP111 30044.91-1048.78 516.37 0.02 0.03 0.04 0.05 ERP112 30040.56-1037.27-1135.50 0.02 0.03 0.03 0.05 ERP113 30033.26 1047.01 505.47 0.02 0.03 0.04 0.05 ERP114 30039.75 1047.42-1121.52 0.02 0.03 0.04 0.05 ERP115 29956.86 1130.36 401.23 0.02 0.03 0.04 0.05 ERP116 29137.52 1137.02-1214.60 0.02 0.03 0.04 0.05 ERP117 6400.74-1033.22 896.31 0.11 0.12 0.14 0.21 ERP118 2582.69-1257.82 648.37 0.11 0.13 0.08 0.19 ERP119 242.09-1254.65 618.89 0.11 0.16 0.05 0.20 ERP120-1096.00-1246.81 205.46 0.11 0.18 0.04 0.21 ERP121 1876.93 1129.33-919.72 0.07 0.14 0.04 0.16 ERP122 1746.28 3006.52-594.04 0.04 0.14 0.08 0.17 ERP124-2424.90-1252.41-803.77 0.11 0.21 0.05 0.24 ERP125 12454.44-775.68-1619.73 0.01 0.02 0.02 0.03 ERP126 12456.79 767.86-1620.81 0.01 0.01 0.03 0.03 ERP200 39400.04 2807.77-133.39 0.03 0.05 0.07 0.09 ERP201 39395.32-2616.56 1030.71 0.02 0.05 0.05 0.07 ERP202 11167.43-4851.76 814.10 0.02 0.02 0.03 0.04 ERP203 10842.34 1424.94 609.81 0.02 0.03 0.03 0.05 ERP204 1796.89 2746.63 951.55 0.05 0.14 0.08 0.17 ERP205-3230.09-586.50 2517.49 0.11 0.23 0.07 0.26 ERP206-1536.11 2829.03 975.71 0.05 0.19 0.12 0.23 ERP207 2135.10 4828.99-1525.19 0.04 0.15 0.14 0.20 ERP208 6814.15 1877.43-1663.90 0.03 0.08 0.08 0.11 ERP209 9650.96 4827.97-793.75 0.03 0.06 0.07 0.09 EXT1 5076.99-1260.11 584.80 0.11 0.12 0.12 0.20 EXT2 1198.22-1335.93-1661.42 0.11 0.16 0.06 0.20 EXT3-1477.66-1268.11-1662.00 0.11 0.20 0.04 0.23 EXT4 1802.14 2151.90-1668.81 0.05 0.15 0.06 0.17 EXT5 1792.15 2980.17-1670.41 0.05 0.15 0.08 0.18 EXT6-1244.98 3292.84-1669.39 0.04 0.20 0.13 0.24 EXT7 63.45 3456.13 259.20 0.04 0.16 0.12 0.21 EXT8 284.97 4272.30 91.28 0.04 0.16 0.14 0.22 EXT9 882.25 4271.05-1674.77 0.04 0.16 0.14 0.22 EXT11 3555.71 4828.85-1083.84 0.04 0.12 0.12 0.18 EXT12 5058.52 4827.39-790.08 0.03 0.10 0.10 0.15 EXT13 493.73 4274.62-1386.79 0.04 0.17 0.14 0.22 EXT14 1244.06 4274.70-2.20 0.04 0.15 0.13 0.20 EXT15 1819.79 2719.15-993.46 0.04 0.15 0.08 0.17 EXT16 1812.20 1239.72-313.89 0.07 0.14 0.04 0.16 EXT18 68.82 4167.70-569.03 0.04 0.17 0.14 0.22 Page 11 of 12
M1 0.00 0.00-1666.00 0.09 0.18 0.03 0.20 MAG-4-DS 2170.85-754.36 33.46 0.10 0.14 0.06 0.18 MAG-4-US 1559.06-754.16 32.92 0.10 0.14 0.05 0.18 MAG-5-DS 3456.51-753.54 6.84 0.10 0.12 0.08 0.18 MAG-5-US 2537.67-750.21 0.02 0.10 0.13 0.06 0.18 MAG-6-DS 4621.66-753.35-3.44 0.10 0.11 0.10 0.18 MAG-6-US 3692.80-754.60 5.47 0.10 0.12 0.08 0.18 MH01 11094.66-1277.63-1674.95 0.02 0.03 0.03 0.04 MH05 18518.34-1870.96-1674.02 0.01 0.01 0.01 0.02 MH07 16554.42 1858.39-1685.92 0.03 0.04 0.05 0.07 MH08 15098.70 1860.18-1689.66 0.02 0.02 0.03 0.04 MH09 13394.78 1856.50-1690.87 0.02 0.03 0.04 0.05 MH10 11111.38 1798.33-1687.61 0.02 0.02 0.03 0.04 MH13 29260.03 2680.84-2364.36 0.02 0.03 0.05 0.06 MH14 31318.00 2288.57-2362.20 0.02 0.03 0.05 0.06 MH15 33320.25 2354.94-2362.58 0.02 0.03 0.05 0.06 MH16 37993.21 2269.61-2385.26 0.02 0.04 0.06 0.08 MH17 38018.25 235.36-2378.24 0.02 0.04 0.05 0.07 MH20 37269.26-4644.09-2367.10 0.02 0.04 0.05 0.06 MH21 35735.75-4630.45-2360.21 0.02 0.04 0.04 0.06 MH22 33677.45-4606.94-2367.98 0.02 0.03 0.04 0.05 MH23 31494.35-4600.75-2370.38 0.02 0.03 0.04 0.05 MH24 39398.63-1644.20-357.70 0.02 0.05 0.06 0.08 Q7 MAG BORE 9474.58 0.33 0.13 0.02 0.02 0.04 0.05 Q9 MAG BORE 11754.00 0.00 0.11 0.02 0.02 0.03 0.04 Q4 MAG BORE 1773.08-0.55-0.14 0.09 0.14 0.04 0.17 Q6 MAG BORE 4140.34-0.45-0.09 0.09 0.12 0.07 0.17 RevA Heights shifted to make Beam=0 12/02/2015 Page 12 of 12