FEP Fluoroplastic Resin

Similar documents
Tefzel ETFE Conductive Fluoroplastic

Tefzel ETFE fluoroplastics

PTFE Fluoroplastic Resin

FEP Fluoroplastic Resin

FEP Fluoroplastic resin

Tefzel ETFE Fluoroplastic

AF Amorphous Fluoroplastic resin

Krytox NRT 8908 Paste

Krytox PFPE/PTFE Greases with Soluble Additive

Krytox 240 Series Greases

This SDS adheres to the standards and regulatory requirements of the United States and may not meet the regulatory requirements in other countries.

Tefzel ETFE FLUOROPOLYMERS

DuPont Krytox GPL 21(X) Series Greases

DuPont Krytox PFPE/PTFE Greases with Soluble Additive

PFA Fluoroplastic Resin

Krytox Sodium Nitrite Inhibited PFPE/PTFE Greases (GPL 22(X) Series)

DuPont Krytox 143 Series Oils

Neoprene polychloroprene

This SDS adheres to the standards and regulatory requirements of the United States and may not meet the regulatory requirements in other countries.

: Tefzel ETFE fluoropolymers

Tefzel ETFE Conductive Fluoropolymer

ELVAMIDE 8061 nylon multipolymer resin

This SDS adheres to the standards and regulatory requirements of Japan and may not meet the regulatory requirements in other countries.

Tynex A abrasive filaments

Corian Solid Surface Material

ZODIAQ Quartz Surfaces

This SDS adheres to the standards and regulatory requirements of the United States and may not meet the regulatory requirements in other countries.

Krytox RFE PFPE High Performance Lubricant

ACP-175 Clean Sweep Date: PRODUCT AND COMPANY IDENTIFICATION. Floor Maintenance / Sweeping Compound

Ref Product name : Corian Solid Surface Product Use : sheets and shaped articles, For professional users only.

This SDS adheres to the standards and regulatory requirements of the United States and may not meet the regulatory requirements in other countries.

KEVLAR brand engineered elastomer

Issue Date: 13-Dec-2012 Revision Date: 10-APR-2015 Version 2 1. IDENTIFICATION. United 432 PHASER GLASS BLAST. Concentrated glass cleaner.

MATERIAL SAFETY DATA SHEET

Issue Date: 12-Dec-2014 Revision Date: 19-Dec-2014 Version 1 1. IDENTIFICATION HANDI-CLEAN EATERS III ODOR CONTROLER 2. HAZARDS IDENTIFICATION

SAFETY DATA SHEET. Section 1. IDENTIFICATION

Issue Date: 04-Dec-2004 Revision Date: 18-Nov-2013 Version 1 1. IDENTIFICATION. Plastpro Fiberglass Doors 2. HAZARDS IDENTIFICATION

SAFETY DATA SHEET. Section 1. IDENTIFICATION

Issue Date: 01-Jun-2010 Revision Date: 10-Sep-2015 Version 1 1. IDENTIFICATION MSH-32, MSH-1, MSH HAZARDS IDENTIFICATION

Safety Data Sheet HIGH TEMP GLUE STICKS (10 PIECES)

Issue Date: 01-Nov-2013 Revision Date: 06-Apr-2015 Version 2 1. IDENTIFICATION 2. HAZARDS IDENTIFICATION

SAFETY DATA SHEET. Section 1. IDENTIFICATION

SAFETY DATA SHEET. Section 1. IDENTIFICATION

1.2. Relevant identified uses of the substance or mixture and uses advised against (INT)

SAFETY DATA SHEET. Section 1. IDENTIFICATION

Issue Date 03-Jan-2011 Revision Date 01-May-2013 Version 1 1. PRODUCT AND COMPANY IDENTIFICATION

Issue Date: Revision Date: Version 1 1. IDENTIFICATION

ACP-172 Upset Absorbent Issue Date: PRODUCT AND COMPANY IDENTIFICATION

Manufacturer : DuPont Performance Elastomers L.L.C Bellevue Park Corporate Center, 300 Bellevue Parkway Wilmington, Delaware 19809

POLY-TEMP GAS PTFE THREAD SEAL TAPE SAFETY DATA SHEET

Safety Data Sheet. Issue Date: 06-Aug-2009 Revision Date: 18-Apr-2014 Version 1 1. IDENTIFICATION. Liquid disinfectant cleaner.

Scientific Polymer Products, Inc.

The MSDS format adheres to the standards and regulatory requirements of the United States and may not meet regulatory requirements in other countries.

SAFETY DATA SHEET. CU-8120 Enzyme & bacteria digestive powder. None. (800) (800) Category 5 Category 3 Category 2B

Krytox PFPE/PTFE Greases with Soluble Additive

Version 1.4 Revision Date 10/19/2015 Print Date 12/01/2015. QIAGEN Str. 1 D Hilden

Scientific Polymer Products, Inc.

SECTION 1: IDENTIFICATION Product Identifier: FoxFarm Big & Chunky Perlite Product Description: Horticultural perlite

Scientific Polymer Products, Inc.

Issue Date: 27-Dec-2011 Revision Date: 28-Jul-2015 Version 1 1. IDENTIFICATION. Buckeye Sanicare Disinfecting Wipes

Store at ambient temperature in a dry location.

Issue Date: 16-Feb-2012 Revision Date: 24-Feb-2015 Version 2 1. IDENTIFICATION. United 894 ZYME-OUT. For industrial and institutional use only.

GHS SAFETY DATA SHEET (SDS)

Material Safety Data Sheet. Drum Cartridge

2. HAZARDS IDENTIFICATION

KAY INDOOR/OUTDOOR ABSORBENT. Use only for the purpose on the product label.

1. IDENTIFICATION. US IVD Bacterial Test Standard BD Bruker US IVD Bacterial Test Standard

Drum Cartridge. Issuing Date Revision Date Version 1

SECTION 1: PRODUCT AND COMPANY INFORMATION SECTION 2: HAZARD(S) IDENTIFICATION

Issue Date: 02-Aug-2004 Revision Date: 04-Jun-2015 Version 1 1. IDENTIFICATION. Water based defoamer.

Biopersistent Special Purpose Fiber

Safety Data Sheet. Issue Date: 14-Feb-2009 Revision Date: 09-Dec-2013 Version 1 1. IDENTIFICATION 2. HAZARDS IDENTIFICATION

SAFETY DATA SHEET. Section 1. IDENTIFICATION

SAFETY DATA SHEET <#####> REMEND CORNEAL REPAIR GEL Version 1.0 Revision Date 01/07/2014

SAFETY DATA SHEET TIDY PEARL FOAMING HAND CLEANER

1. IDENTIFICATION FAST FIND LEAK DETECTOR. Package type: 32oz & 1 gallon. For Professional use only. 2. HAZARDS IDENTIFICATION

SAFETY DATA SHEET (800) (800) Category 2 Category 2A

Issue Date: March 27, 2017 Revision Date: March 27, 2017 Version: PRODUCT AND COMPANY IDENTIFICATION

SAFETY DATA SHEET. Crafters Choice Moisturizing Lotion with Evening Primrose. Product is sold ready to use.

SAFETY DATA SHEET FOAMING INSTANT HAND SANITIZER ALCOHOL FREE. Product Name : FOAMING INSTANT HAND SANITIZER ALCOHOL FREE

Sodium Potassium Aluminum Silicates

: Ceramic Aluminum Oxide Nylox Brush

Version 1.7 Revision Date 10/19/2015 Print Date 12/01/2015. QIAGEN Str. 1 D Hilden

ZODIAQ Quartz Surfaces

Safety Data Sheet (SDS) OSHA HazCom Standard 29 CFR (g) and GHS Rev 03.

SAFETY DATA SHEET <#####> Dermoscent BIO BALM for Dogs Version 2.0 Revision Date 01/08/2015

SAFETY DATA SHEET (800) (800) Category 2 Category 2A

SAFETY DATA SHEET <#####> Advantage Yard & Premise Spray Version 1.0 Revision Date 10/18/2013

MATERIAL SAFETY DATA SHEET

SAFETY DATA SHEET FOAMING NO ALCOHOL HAND SANITIZER

Krytox PFPE/PTFE Greases (GPL 20(X) Series)

Issue Date: 09-Jan-2013 Revision Date: 06-Feb-2017 Version Number: Identification. 2. Hazards Identification

SAFETY DATA SHEET FOAM-UP INSTANT HAND SANITIZER : FOAM-UP INSTANT HAND SANITIZER. : : Hand sanitizer : Product is sold ready to use.

SAFETY DATA SHEET. 1. Identification. 2. Hazard(s) identification. 3. Composition/information on ingredients. Product name PETROLATUM SNOW WHITE

Issue Date 17-Dec-2012 Revision Date 06-Jun-2013 Version 1 1. PRODUCT AND COMPANY IDENTIFICATION 2. HAZARDS IDENTIFICATION

SAFETY DATA SHEET. Disposal considerations : Dispose of wastes in an approved waste disposal facility.

SAFETY DATA SHEET PINK LOTION SOAP (OPAQUE)

SC Johnson Professional Defoamer

Safety Data Sheet. (L-Aspartic Acid) L-Aspartic Acid DATE PREPARED: 3/6/2017. Section 1. Product and Company Identification

Issue Date: 29-Jul-2013 Revision Date: 08-Sep-2014 Version 1 1. IDENTIFICATION. Enviro Patrol Restroom Cleaner 2. HAZARDS IDENTIFICATION

Transcription:

This SDS adheres to the standards and regulatory requirements of the United States and may not meet the regulatory requirements in other countries. SECTION 1. PRODUCT AND COMPANY IDENTIFICATION Product name : Tradename/Synonym : 6100-FL, FEP 9050-J, TE9468F, TE9484FL, 9819FL X, 5101, TE9304, TE9834FL, TE9844FL Product Use : Plastic material for further processing Plastic material for further processing, For industrial use only. Restrictions on use : Do not use in medical applications involving permanent implantation in the human body., See Section 16 Manufacturer/Supplier : The Chemours Company FC, LLC 1007 Market Street Wilmington, DE 19899 United States of America Product Information : 1-844-773-CHEM (outside the U.S. 1-302-773-1000) Medical Emergency : 1-866-595-1473 (outside the U.S. 1-302-773-2000) Transport Emergency : CHEMTREC: +1-800-424-9300 (outside the U.S. +1-703-527-3887) SECTION 2. HAZARDS IDENTIFICATION Not classified as a hazardous substance or mixture according to the Occupational Safety and Health Administration (OSHA) Hazard Communication Standard 2012. Other hazards 1 / 10

The thermal decomposition vapours of fluorinated plastics may cause polymer fume fever with flu-like symptoms in humans, especially when smoking contaminated tobacco. SECTION 3. COMPOSITION/INFORMATION ON INGREDIENTS This product does not contain any components that require disclosure according to OSHA Hazard Communication Standard 2012. SECTION 4. FIRST AID MEASURES General advice Inhalation Skin contact Eye contact Ingestion Most important symptoms/effects, acute and delayed Protection of first-aiders : Move to fresh air in case of accidental inhalation of fumes from overheating or combustion. Consult a physician. : No hazards which require special first aid measures. Wash off with soap and water. Cool skin rapidly with cold water after contact with molten material. Do not peel polymer from the skin. Consult a physician. : Hold eye open and rinse slowly and gently with water for 15-20 minutes. Get medical attention immediately. : Not a probable route of exposure. However, in case of accidental ingestion, call a physician. : First Aid responders should pay attention to self-protection and use the recommended protective clothing Notes to physician : Treat symptomatically. 2 / 10

SECTION 5. FIREFIGHTING MEASURES Suitable extinguishing media Unsuitable extinguishing media Specific hazards : Carbon dioxide (CO2), Dry powder, Foam, Water : Hazardous thermal decomposition products: acid fluorides Fluorinated compounds Hydrogen fluoride Carbon monoxide Special protective equipment for firefighters : In the event of fire, wear self-contained breathing apparatus. Wear suitable protective equipment. Wear neoprene gloves during cleaning up work after a fire. Further information : Protect from hydrogen fluoride fumes which react with water to form hydrofluoric acid. SECTION 6. ACCIDENTAL RELEASE MEASURES NOTE: Review FIRE FIGHTING MEASURES and HANDLING (PERSONNEL) sections before proceeding with clean-up. Use appropriate PERSONAL PROTECTIVE EQUIPMENT during clean-up. Safeguards (Personnel) Environmental precautions Spill Cleanup : Ventilate the area. Material can create slippery conditions. Refer to protective measures listed in sections 7 and 8. : No special environmental precautions required. : Sweep up and shovel into suitable containers for disposal. Clean contaminated floors and objects thoroughly while observing environmental regulations. 3 / 10

Accidental Release Measures : For disposal considerations see section 13. SECTION 7. HANDLING AND STORAGE Handling (Personnel) : For personal protection see section 8. Protect from contamination. When opening containers, avoid breathing vapours that may be emanating. Avoid breathing dust. Avoid contamination of cigarettes or tobacco with dust from this material. Provide appropriate exhaust ventilation at dryers, machinery and at places where dust or volatiles can be generated. In case of insufficient ventilation, wear suitable respiratory equipment. Do not use a torch to clean this material from equipment without local exhaust ventilation and respirator. Regular cleaning of equipment, work area and clothing. Wash hands and face before breaks and immediately after handling the product. Do not contaminate tobacco products. General precaution for all plastics and elastomers: Do not breathe fumes evolved from hot polymer. Handling (Physical Aspects) Dust explosion class Storage Storage period Storage temperature : Keep container tightly closed in a dry and well-ventilated place. Protect from contamination. Stable under recommended storage conditions. SECTION 8. EXPOSURE CONTROLS/PERSONAL PROTECTION Engineering controls : Ensure adequate ventilation, especially in confined areas. Good general ventilation should be provided to keep dust concentrations below the exposure limits. Local exhaust ventilation should be employed to minimize airborne contamination. Personal protective equipment Respiratory protection : When workers are facing concentrations above the exposure limit they must use appropriate certified respirators. 4 / 10

Hand protection Eye protection Skin and body protection : Additional protection: Protective gloves (Type : Kevlar - heat resistant, use possible until worn out) : Safety glasses with side-shields : If there is a potential for contact with hot/molten material wear heat resistant clothing and footwear. Exposure Guidelines Exposure Limit Values This product does not contain any exposure limits that require disclosure according to OSHA Hazard Communication Standard 2012. Non-Constituent(s) Dust (inhalable and respirable fraction) Permissible exposure limit: (OSHA) 5 mg/m3 8 hr. TWA Respirable fraction. Permissible exposure limit: (OSHA) 15 mg/m3 8 hr. TWA Total dust. TLV (ACGIH) 3 mg/m3 TWA Respirable particles. TLV (ACGIH) 10 mg/m3 TWA Inhalable particles. SECTION 9. PHYSICAL AND CHEMICAL PROPERTIES Appearance Physical state : solid Form : powder Color : white Odor : none 5 / 10

Odor threshold ph Melting point/freezing point Boiling point/boiling range : Melting point/range 257-263 C (495-505 F) Flash point : Difficult to ignite, and flame goes out when initiating source is removed. Evaporation rate Flammability (solid, gas) Upper explosion limit : Not applicable Lower explosion limit : Not applicable Vapour Pressure Vapour density Density Specific gravity (Relative density) Water solubility Solubility(ies) Partition coefficient: n- octanol/water : 2.1-2.2 g/cm3 : insoluble Auto-ignition temperature : 520-560 C Auto-ignition temperature Ignition temperature : 530-550 C 6 / 10

Decomposition temperature Viscosity, kinematic Viscosity, dynamic % Volatile : 0 % Limiting oxygen index : > 95 % SECTION 10. STABILITY AND REACTIVITY Reactivity : No decomposition if stored and applied as directed. Chemical stability : Stable under normal conditions. Possibility of hazardous reactions : During drying, cleaning and moulding, small amounts of hazardous gases and/or particulate matter may be released. These may irritate eyes, nose and throat. Large molten masses may give off hazardous gases. Conditions to avoid : To avoid thermal decomposition, do not overheat. Abnormally long processing time or high temperatures can produce irritating and toxic fumes. Stable under normal conditions. Incompatible materials Hazardous decomposition products : Hazardous thermal decomposition products:: Hydrogen fluoride, Carbonyl fluoride, Perfluoroisobutylene SECTION 11. TOXICOLOGICAL INFORMATION Inhalation : The thermal decomposition vapours of fluorinated plastics may cause polymer fume fever with flu-like symptoms in humans, especially when smoking contaminated tobacco. Further information : The product contains no substances classified as hazardous to health in concentrations which should be taken into account. 7 / 10

Carcinogenicity The carcinogenicity classifications for this product and/or its ingredients have been determined according to HazCom 2012, Appendix A.6. The classifications may differ from those listed in the National Toxicology Program (NTP) Report on Carcinogens (latest edition) or those found to be a potential carcinogen in the International Agency for Research on Cancer (IARC) Monographs (latest edition). None of the components present in this material at concentrations equal to or greater than 0.1% are listed by IARC, NTP, or OSHA, as a carcinogen. SECTION 12. ECOLOGICAL INFORMATION Additional ecological information : The product contains no substances classified as hazardous to the environment in concentrations which should be taken into account. SECTION 13. DISPOSAL CONSIDERATIONS Waste disposal methods - Product : Like most thermoplastic plastics the product can be recycled. If recycling is not practicable, dispose of in compliance with local regulations. Incinerate only if incinerator is capable of scrubbing out hydrogen fluoride and other acidic combustion products. Waste disposal methods - Container Contaminated packaging : Remove labels and thoroughly clean containers prior to recycling or reuse. : Empty containers should be taken to an approved waste handling site for recycling or disposal. SECTION 14. TRANSPORT INFORMATION Not classified as dangerous in the meaning of transport regulations. 8 / 10

SECTION 15. REGULATORY INFORMATION TSCA : On the inventory, or in compliance with the inventory SARA 313 Regulated Chemical(s) California Prop. 65 : This material does not contain any chemical components with known CAS numbers that exceed the threshold (De Minimis) reporting levels established by SARA Title III, Section 313. : WARNING! This product contains a chemical or chemicals known to the State of California to cause cancer.tetrafluoroethylene SECTION 16. OTHER INFORMATION NFPA Health : 2 Flammability : 1 Reactivity/Physical hazard : 0 Restrictions for use : Do not use or resell Chemours materials in medical applications involving implantation in the human body or contact with internal body fluids or tissues unless agreed to by Seller in a written agreement covering such use. For further information, please contact your Chemours representative. Chemours and the Chemours Logo are trademarks of The Chemours Company. Before use also read the following bulletin(s): Fluoropolymer Safe Handling Guide published by the Society of the Plastics Industry. 9 / 10

Revision Date : 07/01/2016 The information provided in this Safety Data Sheet is correct to the best of our knowledge, information and belief at the date of its publication. The information given is designed only as a guidance for safe handling, use, processing, storage, transportation, disposal and release and is not to be considered a warranty or quality specification. The information relates only to the specific material designated and may not be valid for such material used in combination with any other materials or in any process, unless specified in the text. Significant change from previous version is denoted with a double bar. 10 / 10