Safety Solutions For A Portable Deadweight Anchor

Similar documents
Fall Arrest Anchor Solutions

Kee Anchor Operation & Maintenance Manual

The Weightanka System

Kee Anchor Operation & Maintenance Manual

Installation & User Manual

Reaching new heights in Fall Protection Solutions.

Operating manual Mobile Man Anchor IM-200 Reference No. IM 200

PERSONAL FALL PROTECTION

The Work At Height Safety Association

Carry bags. Rescue is where the casualty is: In imminent danger if their situation is not resolved Unable to escape a situation unaided

HEIGHT SAFETY. Elasticised shock absorbing Lanyard Twin tail lanyard allowing transfer to adjacent anchors


Mobile Man Anchor Operation & Maintenance Manual O&M - MOBILE MAN ANCHOR

ISO INTERNATIONAL STANDARD. Personal protective equipment for protection against falls from a height Single-point anchor devices

Think Safety, Think Safesite O&M - MOBILE MAN ANCHOR

WAHSA TGN04 Technical Guidance Note 4 (formerly TGN08) GUIDANCE ON THE SELECTION, USE, MAINTENANCE AND INSPECTION OF ANCHOR DEVICES

THE ULTIMATE IN MODULAR SYSTEM DESIGN

Welcome. Globestock Ltd.

??????? is committed to providing a safe work environment for its employees and preventing occupational injuries due to falls.

Security and confidence at height.

FALL RANGE PROTECTION

INSTALLATION AND USAGE HANDBOOK

Deadweight Trolley. Deadweight

Operation and Instructional Techniques Manual

Overview (key points)

Height Safety IWR LI FTING

Section 16B. Fall Protection. Falls are the second leading cause of death in the workplace. Factors contributing to falling incidents:

MSA Latchways Solutions for Industry

ROOFING FALL PROTECTION 27.I

A PERMANENT SAFETY LINE FOR WORKING AT HEIGHT

RESCUE LIFTING DEVICE RUP 503-[...] AT 053-[...] xx

Rope friendly stainless steel cam Tether attachment point (2mm diameter cord) for drop-free installation and removal

SPYDA TEMPORARY ANCHOR POINT

Developmental Products

BRAKE WINCH RUP 503-[T/BT] EQUIPMENT FOR LIFTING LOADS. AT 053-[T/BT] xx

Building 68 Roof Safety Assessment

WAHSA TGN01 Technical Guidance Note 01 (formerly TGN02) GUIDANCE ON THE SELECTION, USE, MAINTENANCE AND INSPECTION OF RETRACTABLE TYPE FALL ARRESTERS

8. Fall Protection Procedures WAC

Floor Mount Socket. T: +44 (0) F: +44 (0)

FALL PROTECTION GUIDELINE

SELF-CONTAINED VACUUM ANCHOR SYSTEMS AVIATION

Assembly Instructions

White paper. Fit for Purpose. Product Testing & Performance. Constant Force post system

A variety of other devices can be used with the front dee ring, but please check for suitability.

User Instruction Manual

The most versatile Fall Protection EVER

mmdugouts portable dugout range 2017

cricket Premier Portable Cage Winch System Heavy Duty Parks Parks Cages Wooden Bays Stumps Netting Sundries cricket

Technical Briefing Note

White paper. Fit for Purpose. Product Testing & Performance. Constant Force post system

SINGLE LEG HYBRID LANYARD DSL 2

SAFETY 101: FALL PROTECTION: REDUCING FALLS DURING RESIDENTIAL CONSTRUCTION: RE-ROOFING FACT SHEET

GOTCHA CRD. Rescue, hoisting and abseiling equipment EN341 / EN1496 CE0158 TECHNICAL DATA

Safe Work Practices (SWP) SWP (6) FALL PROTECTION PROGRAM

DiaSafe. Systems. Ballasted Fall Protection. DiaSafe Ballasted Single Solo DiaSafe Ballasted Single Duo DiaSafe Ballasted Line Multi. w w w.diadem.

Appendix 9 European Standards and Markings for Fall Arrest. Issue 7: August 2008

Fall Protection Checklist. Guardrail System

Ke H e er L c in ul e Operation & Maintenance Manual O&M - HERCULE

A N C H O R T A B S N O R T H W E S T ANCHOR TAB VF. Patented. User Instructions

SG16:14. Management of Fall Protection Equipment 1. INTRODUCTION

P&P HORIZONTAL LIFELINE USERS OPERATING INSTRUCTIONS

Region: USA Language: EN Number : TB0031 Revision : B. Total Page: 3 Page n : 1 First Issue: 10/2014 Rev. Date: 10/08/2014

BiboBlock. Fall arrest system for flat roofs

XSPLATFORMS ROOFTOP SYSTEMS -

ROOFSAFE ANCHOR AND CABLE SYSTEM

At the end of this presentation you should know the difference between fall prevention, fall restraint, and fall arrest.

Use of Equipment to Undertake Work Over the Side on Yachts and Other Vessels

Health and Safety Code of Practice. SCP38 Working at Height

3-WAY FALL ARREST AND RECOVERY SRL USER MANUAL

The purpose of this training is to give field technicians awareness training and guidelines on potential hazards they may encounter in the field.

XTS-Impact. XTS-Terminal (hold)

FALL PROTECTION WORK PLAN (Alstom Power Installation Canada)

HORIZONTAL SYSTEMS SOME SAY WE OVER-ENGINEER LIFELINES. WE SAY YOU CAN T OVER-DO SAFETY.

Sr. No. ITEM DESCRIPTION Model: SIZE FALL PROTECTION. PN 06 SAFETY BELT with 3 mtr. PP Lanyard & Hook PN 101

FALL PROTECTION PLAN FALL PROTECTION PROGRAM

1 AIM 2 4 REASONS FOR INCLUSION 3 6 PLANT AND EQUIPMENT REQUIREMENTS 4 7 SYSTEM AND PROCEDURAL REQUIREMENTS 4 8 PEOPLE REQUIREMENTS 6

Zero tolerance is essential to height safety because our lives depend on it. ZERO equipment is the result of extensive global research, innovation and

KeeLine Operation & Maintenance Manual

ManSafe for Transmission Towers

DREW UNIVERSITY FALL PROTECTION PROCEDURE (DRAFT 12/11)

hockey hockey Integral Weighted Goals Aluminium Goals Fence Folding Goals Premier Hockey Goals Folding Wheelaway Goals

Further guidance from BSI Technical Committee PH/5 - Personal Fall Protection on eyebolts for rope access

Certified in 3 & 4 leg configurations to CEN/TS 16415:2013 for maximum 2 persons and EN 795:2012 for single person use. total edge management system

Height Safety Lifting Load Control

Application Showcase LIFE MATTERS TM

Volleyball. Order online at

Working at Heights Training Checklist (Ontario Version)

TWISTFIX. Permanent Roof Anchor Post th Street, Malta OH, MaltaDynamics.com// (800) Page 1. Easy and reliable waterproofing

PF30 Inspection & Maintenance Manual

Fall Protection Refresher Orientation. Fall Protection Refresher Orientation 1

Workman Fall Protection Products

User Instructions. Installing Fall Protection Void Formers. Please read carefully before fixing anchorage components into formwork

VOLLEYBALL. ORDER ONLINE AT 167

Rope Grab Operation & Maintenance Manual

ATOM-X 2. User Manual

ACCESS. Andrea Giazzi, Corde Access, Switzerland PTK Equipment Ltd., Bangkok Airport, Thailand

Kratos Safety FA FA FA FA POINT LUXURY FULL BODY HARNESS

Height Safety Lifting Load Control Safety Management GOTCHA Rescue Range TECHNICAL DATA

Know Your ABCs FALL PROTECTION GUIDE

OPERATION AND INSTRUCTION MANUAL Swivel Anchor Model: HD26248

Transcription:

S A F E T Y A T T H E H I G H E S T L E V E L Safety Solutions For A Portable Deadweight Anchor Galvanised to BS EN ISO 1461 where applicable FULLY PORTABLE NO STRUCTURAL ATTACHMENT OR PENETRATION OF ROOF SURFACE OR SURROUNDINGS 0194

Portable Deadweight Anchor System The KEE ANCHOR range of products is centred on the WEIGHTANKA portable deadweight anchor designed for use where the installation of collective protection or permanent anchor devices is not viable. A basic system weighs only 250Kg, with no single item weighing more than 25kg, making this a very practical and convenient option. If anyone needs to abseil down a building, ACCESSANKA provides a stable platform for the attachment of rope access lines. WIREANKA is the first anchor device to be approved for use as supports for Class C horizontal flexible safety lines. Each of the products has been independently tested by the National Engineering Laboratory and is CE approved to meet the PPE Directive. As a leading supplier of fall protection solutions, Kee Safety offers a range of collective and personal protection products including KEEGUARD, KEE DOME, KEE ROOFPOINT and KEE I-BOLT. Our technical team can offer practical assistance in all aspects of design, installation and compliance with relevant standards for each of these products. Weightanka is a mobile, deadweight anchor device for use on roofs of up to 5 degrees pitch, where the absence of guardrails or permanent anchor devices would otherwise preclude safe means of access. Weightanka is the first Class E anchor device to be approved for use on all roof surfaces when wet and also for use downhill on metal clad roofs (subject to the addition of two extra weights). Weightanka utilises a central pedestal (attachment point) which raises the height at which the arrest force is applied, thus reducing the distance the anchor device moves during a fall arrest event. Why you need WEIGHTanka

Kee Features and Benefits of WEIGHTANKA Features Independently tested at N.E.L. (National Engineering Laboratory, East Kilbride N.B. 0320) Conforms to CLASS E EN 795, BS 7883 & ISO 14567 Galvanised to BS EN ISO 1461 Does not penetrate the roof surface Baseweights fully encased in rubber moulding, with 10 year guarantee Raised central pedestal reduces the distance of travel during a fall arrest event Benefits No need for expensive Inertia reels Rubber moulded base weights prevent rubber pads peeling at the edges With the correct model it can be used on any of the following roof surfaces in WET or DRY conditions: Single Ply Membrane Asphalt Steel Cladding Concrete Stone Chippings (Brushed) Mineral Felt Can be used on roofs up to 5 pitch For fall restraint up to 2 workers may be attached providing they cannot get to less than 500mm from the edge Easy and quick to assemble with fewer loose components than others on the market Portable Deadweight Anchor System for Rope Access Accessanka is designed as an accessory to Weightanka to provide a portable anchor device for rope access workers, allowing them to work safely in accordance with BS7985, the Code of Practice for the Use of Rope Access Methods for Industrial Purposes. When correctly installed, the system is extremely stable and will not migrate across the roof surface either in normal use or when arresting the fall of both a worker and a rescuer up to a 200kg limit. Accessanka has been designed for easy transportation and installation with no part over 25kg or 2 metres.

Kee Features and Benefits of ACCESSANKA Features Independently tested at N.E.L. (National Engineering Laboratory, East Kilbride N.B. 0320) Conforms to CLASS B & E EN 795, BS 7883 & ISO 14567 Self contained portable anchor device Does not penetrate the roof surface Separate anchor point for working line and back up line Modular construction Internally force balanced system causes the assembly to remain static, even when arresting the fall of both worker and rescuer Benefits Requires no attachment to structural members Easily moved across roof surface, removing need for multiple attachment points Rope lines held away from edge of building reducing risk of abrasion Provides full fall arrest protection before approaching edge Aluminium, galvanised and rubber coated parts requiring minimum maintenance Deadweight Anchor System for Flexible Safety Lines Wireanka is a system of deadweight anchor devices designed to support Class C horizontal, flexible safety lines to EN 795. It is intended for use on flat roofs, in temporary situations, or where it is preferable that penetration of the roof surface be avoided. Wireanka is the first deadweight anchor to have been tested and approved for Fall Arrest use with Class C systems to EN 795. For fall arrest purposes no more than one user may be attached to the system at any one time. Special configurations (at extra cost) allow for additional users. For restraint use, up to three users may be attached at any one time. To be classified as restraint, the position of the Wireanka and the length of the lanyard must ensure it is not possible to approach within 500mm of a roof edge or other opening.

Kee Features and Benefits of WIREANKA Features First deadweight support to be approved for Class C horizontal flexible safety lines Independently tested at N.E.L. (National Engineering Laboratory, East Kilbride N.B. 0320) Conforms to Class C EN 795 & ISO 14567 Galvanised to BS EN ISO 1461 Does not penetrate the roof surface Base weights fully encased in rubber moulding, with Installation 10 year guarantee Benefits Suitable for use on any premises where disruption of day-to-day running by opening the roof is to be avoided With the correct model it can be used on any of the following roof surfaces in WET or DRY conditions: Single Ply Membrane Asphalt Steel Cladding Concrete Stone Chippings (Brushed) Mineral Felt Rubber moulded base weights prevent rubber pads peeling at the edges Extremity Pedestals The mass of the extremity Wireanka assembly will depend on the type of roof surface on which the system is erected. Type of Roof Surface Quantity of Rubber Weights Quantity of Galvanised Weights Asphalt, Concrete, Mineral Felt or Stone Chippings Total Mass = 300kg Steel Clad Roofs Total Mass 350kgs Flat, Smooth single Ply Membrane Total Mass = 400kg Embossed Single Ply Membrane total Mass = 500kg 4 8 4 10 4 12 4 16 Note: 500kg Extremity Anchors will produce point loadings in excess of the usual 100kg limit. The advice of a structural engineer should be sought. Conditions of Use Condition of roof surface Mass of Extremity Anchor Mass of Intermediate Anchor EXCEPT on Embossed Membrane Maximum span betwen WIREANKA supports Maximum overall length of system wet or Dry See Table above 250kg (4 rubber weights + 6 galvanised weights) 400kg (4 rubber weights + 12 galvanised weights) Wire systems 15m 100m (15m on single span wire systems)

Table of Minimum Edge Distance and Minimum Free Fall Distance Relative to Span Fall Arrest Systems All Systems Maximum Span (m) 5 6 8 10 12 15 Minimum Free Fall Distance (m) 5.2 5.4 5.8 6.2 6.6 7.2 Minimum Edge Distance (m) 2.5 2.5 3.0 3.0 4.0 4.0 Restraint Only Systems All Systems Maximum Span (m) 5 6 8 10 12 15 Minimum Edge Distance (m) 2.5 2.5 2.5 2.5 Consult our technical department Standard Weightanka units are not suitable for use with horizontal safety lines Kee Safety Ltd 1 Boulton Road Reading Berkshire RG2 0NH Tel: 0118 931 1022 Fax: 0118 931 1146 Email: sales@keesafety.com Web: www.keesafety.com Reliant Action Ltd. 1708 St. James Street Winnipeg, MB R3H 0L3 Tel: 204-334-7325 Fax: 204-233-5677 Email: travis@realsafety.ca web: www.realsafety.ca ACCESSANKA, WEIGHTANKA, WIREANKA, KEE GUARD, KEE DOME, KEE ROOFPOINT, KEE I-BOLT and KEE ANCHOR are trademarks of Kee Safety Limited. Whilst every effort has been made to ensure the accuracy of the information contained in this brochure Kee Safety Ltd cannot be held responsible for any errors or omissions. Kee Safety Ltd reserves the right to alter or withdraw products without prior notice. Kee Safety Ltd accepts no responsibility for any loss or damage arising from improper use of their products. 2008 Kee Safety Ltd. All Rights Reserved. KACH6PP_UK_v1/0408