Pressure Regulator Pressure range onnection thread Device Page max. 22 l/min miniature -850 0 mbar 1 8 NPT V800.02 max. 22 l/min miniature -850 0 mbar 10-32 and flange V900.02 max. 0 l/min precise -1 +0,.4 / 10 bar G¼.03 max. 330 l/min precise -990... 0 mbar G¼ - G½ V10.04 max. 800 l/min precise -1 +0. / 10 bar G½ and G¾ R251.05 adjustment valve -1-0.3 / 0 bar G 1 8 - G1 V04/V05.06 Pressure Regulator.01
Miniature Pressure Regulator, made of Plastic V800 / V900 Miniature precision regulator with diaphragm and high outlet pressure constancy, small dimensions, low weight. 20-turn hysteresis-free adjustment range allows sensitive pressure setting. Supply pressure max. -1000 mbar ccuracy at pressure variation of 10 mbar: < 4 mbar pressure deviation at pressure removal/reapplication: < mbar pressure deviation setting accuracy: < 2.5 mbar ir consumption 0.3 l/min at -1000 mbar pressure djustment by plastic knob, adjusting screw or preset Gauge port not available Temperature range 4 to 66 / 39 F to 151 F Material ody: polysulfone Inner valve: stainless steel and acetal Elastomer: NR/una-N 10-32 or flangeable 0-350/-850 mbar Dimensions Pressure Flow Order Preis adjustment rate range number D mm mm mm by l/min mbar regulator 10-32 V900-W pressure max. -1000 mbar, with constant bleed 29 8 8 adjusting knob 22-350 0 V900-10WK 9,00-850 0 V900-30WK 9,00 29 60 8 adjusting screw 22-350 0 V900-10WOS 4,00-850 0 V900-30WOS 4,00 29 43 8 preset 22 indicate on order V901-.. 84,00 reglator with flange V900-M pressure max. -1000 mbar, with constant bleed 29 8 8 adjusting knob 22-350 0 V900-10MWK 89,00-850 0 V900-30MWK 89,00 29 60 8 adjusting screw 22-350 0 V900-10MWOS 84,00-850 0 V900-30MWOS 84,00 29 43 8 preset 22 indicate on order V901-.. M 94,00 V800-.. WK V900-.. WK Special options, add the appropriate letter or number 1 8 NPT connection thread, width 40 mm V8..-..... +10,00 ccessories mounting bracket made of steel W15-01 5,00 V900-.. WOS Ø5,5 1 45 V901-.. V900-..WK V900-..WOS V901-.. W15-01 22.5 P 22.5 3.1 M3x 1,1 8 5 16,9 NR O-Ring suppplied with unit OUTPUT INTPUT 29 40 16.9 tank regulator V800-... V900-.. M V900-.. M V900-.. M connection V900-10WK.02
Precision Pressure Regulator 0 l/min Diaphragm regulator ensuring high precision in both and positive pressure range. Supply pressure max. 1 bar ccuracy response sensitivity: < 2 mbar djustment by handwheel with locknut ir consumption max. 2.8 l/min in positive pressure range Flow rate 0 l/min* 1 in range, 900 l/min* 2 in positive pressure range Gauge port G¼ on both sides of the body, screw plugs supplied Temperature range -40 to 90 / -40 F to 194 F Material ody aluminium die-cast Inner valve: stainless steel and brass Elastomer: NR/una-N G 1 /4 0.14 / 10 bar Dimensions Kv Flow onnection Order Preis D value rate thread range number D mm mm mm mm m 3 /h m 3 /h* 1 l/min* 1 G bar pressure regulator pressure max. 1 bar, with constant bleed 68 184 20 65 0,8 4 0 G¼ -1... +0.14-020 450,00-1... +0. -02 450,00-1... +2.0-02 450,00-1... +.0-02 450,00-1... + 10-02D 450,00 Special options, add the appropriate letter NPT connection thread -0.. N +10,00 tamper-proof cap made of aluminium, adjustment by screwdriver, total height 189 mm -0.. T ccessories pressure gauge Ø 63 mm, -1 0 bar, G¼ M6302-00 12,00 mounting bracket made of steel W00-33 12,00 aspirator borehole pump gauge G¼ Ø9 58 or compressed air consumer D 18 45 cross-section connection for downstream regulation bypass regulation W00-33 1 2 downstream regulation to close tank tank Note strainer is provided on the atmospheric or pressure side, but an additional filter is recommended. 1 ypass regulation Upstream installation is preferred when rapid exhaust of a tank or system is required. That way the acts directly upon the tank and is not being throttled by the regulator. 2 * 1 for compressed air at -0.98 bar pressure and 0 bar outlet pressure * 2 for compressed air at bar pressure and 1.4 bar outlet pressure Gauges: see chapter for measuring devices Downstream regulation The regulator is located between the pump and the tank. The is energy-saving and it is easy to fill the tank to its optimal level with. -020.03
Precision Pressure Regulator 330 l/min V10 High precision diaphragm regulator with high flow capacity. balanced valve minimizes the effects of variation. ccuracy response sensitivity: < 2 mbar djustment by handwheel with locknut Gauge port G¼ on both sides of the body, screw plugs supplied Temperature range 0 to 90 / 32 F to 194 F for appropriately conditioned compressed air down to -40 / -40 F Material ody: aluminium die-cast Elastomer: NR/una-N, optionally FKM Inner valve: stainless steel, brass, aluminium and steel G 1 4 up to G 1 2-10 / -500 / -990... 0 mbar Dimensions Kv- Flow onnection Pressure Order Preis value rate thread range number D mm mm mm (m 3 /h) m 3 /h* 1 l/min* 1 G mbar Precision regulator pressure max. -1000 mbar, without constant bleed V10 6 152 25 1.1 20 330 G 1 4-10 0 V10-02 95,00-500 0 V10-02 95,00-990 0 V10-02 95,00 6 152 25 1.1 20 330 G 3 8-10 0 V10-03 825,00-500 0 V10-03 825,00-990 0 V10-03 825,00 6 152 25 1.1 20 330 G 1 2-10 0 V10-04 845,00-500 0 V10-04 845,00-990 0 V10-04 845,00 V10 Special options, add the appropriate letter NPT connection thread V10-0.. N +10,00 Verstellsicherung made of aluminium, adjustment by screwdriver, total height 160 mm V10-0.. T +35,00 FKM-Elastomere V10-0.. V +110,00 ccessories pressure gauge Ø 63 mm, 0 bar down to -1bar, G¼ M6302-00 12,00 mounting bracket made of steel W00-34 16,50 regulated cross-section 58 Ø9 5 5 18 3 W00-34 166 exhaust gauge G¼ exhaust tank regulated gauge port V10 Gauges: see chapter for measuring devices.04 gauge port with tamper-proof cap connection diagram V10-02
Precision Pressure Regulator 800 l/min R251 Diaphragm regulator ensuring high precision in both and positive pressure range. Supply pressure max. 1 bar ccuracy response sensitivity: < 2.5 mbar djustment by handwheel with locknut ir consumption without constant bleed Flow rate 800 l/min* 1 in range, 4200 l/min* 2 in positive pressure range Gauge port G¼ on both sides of the body, screw plugs supplied Temperature range -40 to 90 / -40 F to 194 F Material ody: aluminium die-cast Inner valve: stainless steel and brass Elastomer: NR/una-N G½ and G¾ 0./10 bar Dimensions Kv Flow onnection Order Preis D value rate thread range number D mm mm mm mm m 3 /h m 3 /h* 1 l/min* 1 G bar pressure regulator pressure max. 1 bar, without constant bleed R251 8 238 40 98 2,5 48 800 G½ -1... +0. R251-04 1.00,00-1... +2.0 R251-04 1.00,00-1... + 10 R251-04D 1.00,00 8 238 40 98 2,5 48 800 G¾ -1... +0. R251-06 1.00,00-1... +2.0 R251-06 1.00,00-1... + 10 R251-06D 1.00,00 Special options, add the appropriate letter NPT connection thread R251-0.. N +10,00 tamper-proof cap made of aluminium, adjustment by screwdriver, total height 240 mm R251-0.. T +35,00 FKM elastomer R251-0.. V +165,00 R251 ccessories pressure gauge Ø 63 mm, -1 0 bar, G¼ M6302-00 12,00 mounting bracket made of steel W00-4 80,00 handwheel spring signal diaphragm reliev valve control diaphragm connecting tube diaphragm assembly outlet aspirator tube D gauge G¼ 39.5 2.5 Ø5.5 Ø5.5 2 inlet valve motor diaphragm cross section connection for downstream regulation 20 bypass regulation 1 R251 W00-4 2 downstream regulation to close tank tank Note strainer is provided on the atmospheric or pressure side, but 1 an additional filter is recommended. ypass regulation Upstream installation is preferred when rapid 22 exhaust of a tank or system is required. That way the acts directly upon the tank and is not being throttled by the regulator. * 1 for compressed air at -0.98 bar pressure and 0 bar outlet pressure * 2 for compressed air at bar pressure and 1.4 bar outlet pressure Gauges: see chapter for measuring devices Downstream regulation The regulator is located between the pump and the tank. The is energy-saving and it is easy to fill the tank to its optimal level with. R251-04.05.05
djustment Valves V04 / V05 pplication djustment When these valves reach a certain precalibrated degree, they introduce atmospheric air into the circuit to prevent the increase of the set value and keep it constant. They are used as safety valves on non-commissioned tanks or containers at high level and on cup lifting systems. V04: by rotating the knurled bush in both directions V05: by knurled head screw or adjusting knob on spindle with fine thread Temperature range -20 to 80 / -4 F to 16 F Material ody: nickel-plated brass Inner valve: spring steel and brass Elastomer: NR/una-N G 1 8 up to G1-1... 0 bar Dimensions Flow onnection - Order Preis SW rate thread range number D mm mm mm m 3 /h* 1 l/min* 1 G bar adjustment valve regulator with external leakage V04 45 12 14 1160 G 1 8-1... - 0.3 V04-01 26,00 5 15 24 20 1330 G½ -1... - 0.3 V04-04 54,00 60 12 30 40 1660 G¾ -1... - 0.3 V04-06 60,00 65 12 35 0 1 100 G1-1... - 0.3 V04-08 6,00 V04-01 V04-04 adjustment valve, precise V05 regulator with external leakage 63 26 25 14 1260 G¼ -1... 0 V05-02 102,00 82 52 32 20 100 G1-1... 0 V05-08 290,00 V04-06 V04-08 /F12 /F 24/30/35 V04-01 V04-04 / -06 / -08 V05-02 V05-08 tank /F25 /F32 V05-02 V05-08 V04-01.06