PROPAK-EZ-FLO HIGH PERFORMANCE, RUGGED DEPENDABILITY, TRUSTED TECHNOLOGY

PROPAK-EZ-FLO HIGH PERFORMANCE, RUGGED DEPENDABILITY, TRUSTED TECHNOLOGY

PROPAK-EZ-FLO HIGH PERFORMANCE, RUGGED DEPENDABILITY, TRUSTED TECHNOLOGY The Propak-EZ-Flo has been designed specifically to meet the demands of the Professional Fire Service offering an unequalled level of performance and user comfort. Propak-EZ-Flo provides firefighters a simple to use SCBA which is easily upgraded to include communications and situational awareness. For over 80 years Scott Safety s innovative engineering and customer led product evolution has enabled their range of Breathing Apparatus to adapt, respond and predict the ever changing needs of users across industries. Today millions of users worldwide trust in the proven high performance, rugged dependability and the trusted technology of Scott Safety s products. Backed by dedicated customer support, Scott Safety s SCBA is the preferred choice across fire fighters, marine and other industries. HIGH PERFORMANCE - Developed in response to customer feedback the ProPak range has been designed to increase comfort, improve ease of movement and reduce user fatigue. The rigid back plate is lightweight and ergonomically designed to meet these demands. - The entire range uses the same high performance, reliable pneumatics which provide low breathing resistance and excellent dynamic performance particularly at low flow rates - Propak-EZ-Flo provides firefighters a simple to use SCBA which is easily upgraded to include communications and situational awareness devices. RUGGED DEPENDABILITY - Range of specifications available to meet the needs of different users and to withstand the applications in which they ll be used. - All components are user serviceable and low cost leading to lower through life costs, simpler maintenance, reduction in down time of sets and improved operational flexibility TRUSTED TECHNOLOGY - High performance, reliable pneumatics with compact first breath activated demand valve with bypass, the same pneumatics are used on each specification of the ProPak - ProPak-EZ-Flo features the proven EZ-Flo Demand Valve from Scott Safety, seen at the heart of every Scott Safety AirPak. EZ- Flo features a first breath automatic activation and anti-fogging spray bar which also acts as a cooling effect for the user. RANGE OF SPECIFICATIONS ProPak-f-Ez-Flo a fire fighting SCBA unit, designed for user comfort with side arms and padded shoulder straps. ProPak-fx-Ez-Flo the ultimate in user comfort for the professional fire fighter offering all the benefits of the ProPak-f with the added feature of an adjustable back plate which means that the unit can be altered to fit the height of the wearer. 2

EZ-FLO - PERFORMS IN THE TOUGHEST ENVIRONMENTS ProPak-EZ-Flo utilises the proven EZ-Flo Demand Valve, as seen on the Scott AirPak SCBA. ProPak-EZ-Flo enables the use of AV3000HT which features connections to advanced communications and situational awareness devices. ProPak EZ-Flo is available in standard and CBRN variants, for protection in the toughest environments. ProPak-Ez-Flo* *ProPak-EZ-Flo available in F and FX variants REDUCING VALVE First stage pressure reducing valve featuring non-adjustable, spring loaded piston mechanism and outlet supply protected by pressure relief valve. PRESSURE INDICATOR & WARNING WHISTLE Bourdon tube type dial indicator Heat and Impact resistant polycarbonate lens EZ Flo CBRN EZ Flo EZ-FLO DEMAND VALVE First breath automatic activation Quarter turn attachment Audible and tactile locking system Ergonomically designed to fit into the fire fighters gloved hand Low breathing resistance helps the user breathe more easily Fitted with Anti Fogging Spray Bar which also acts as a cooling effect for the user EZ Flo approved to EN137:2006 EZ Flo CBRN approved to EN137:2006 and BS8468-1 HOSES Stainless steel swivel hose fittings Medium pressure hose Maximum working pressure 16 bar Minimum burst pressure 80 bar High pressure hose Maximum working pressure 450 bar Minimum burst pressure 800 bar Adjustable padded shoulder straps (ProPak-f & ProPak-fx only) AV3000 HT Rapid connect cylinder band allows adjustment or change out of cylinder in seconds COMMUNICATIONS EPIC 3 RI Voice Communication System Epic 3RI is a Radio communication voice amplifier which is compatible with a range of different radios accesspories include lapel speaker microphones, specialized accessories, and programming utilities Reflective thread for extra visibility (ProPak-f Pak-f & ProPak-fx only) Kevlar blend webbing with wrap-around harness Adjustable waistband features large buckles for quick and easy donning and doffing *ProPak-EZ-Flo available in F and FX variants. FX variant displayed above. Ergonomically designed, strong and lightweight injection moulded back plate Swivelling waistbelt (ProPak-fx only) Adjustable back plate allows the unit to be altered to the users height increasing user comfort (ProPak-fx only) A3000HT FACEMASK Propak EZ-FLO-F and FX is compatible with the AV3000HT facemask, which offers maximum comfort and protection. The AV3000HT passes the NFPA thermal radiant heat requirement of 15Kw/ M2. OPTIONS The Scott Safety ProPak can be specified in many configurations including Split Demand Valve Coupling (SDC) and attachments for Airline, which can be used for Rescue Second Man (RSM) and Decontamination 3

SPECIFICATIONS & ORDERING INFORMATION PROPAK EZ-FLO BAR SELF CONTAINED BREATHING APPARATUS Product Specifications Weight Single configuration (less cylinder) PROPAK-F-EZ-FLO 3.3kg PROPAK-FX-EZ-FLO 4.3kg Single configuration & Facemask (less cylinder) PROPAK-F-EZ-FLO 3.5kg PROPAK-FX-EZ-FLO 4.5kg Dimensions Length 630mm Width 285mm Depth 220mm PROPAK-f-EZ-FLO Article Number Description Approval Application 2031958 PROPAK-F-EZ FLO 2031961 PROPAK-F-EZ FLO-SDC 2031949 PROPAK-F-EZ FLO CBRN 2031952 PROPAK-F-EZ FLO-SDC-CBRN BS EN137:2006 BS EN137:2006 BS EN137:2006 / BS 8468-1 BS EN137:2006 / BS 8468-1 Industrial/Fire Service/Oil and Gas Fire Fighting Industrial/Fire Service/Oil and Gas Fire Fighting Professional Fire Service Professional Fire Service PROPAK-fx-EZ-FLO Article Number Description Approval Application 2031988 PROPAK-FX-EZ FLO 2031991 PROPAK-FX-EZ FLO-SDC 2031977 PROPAK-FX-EZ FLO-CBRN 2031980 PROPAK-FX-EZ FLO-SDC-CBRN BS EN137:2006 / BS EN137:2006 / BS EN137:2006 BS 8468-1 BS EN137:2006 BS 8468-1 Professional Fire Service Professional Fire Service Industrial/Fire Service/Oil and Gas Fire Fighting Industrial/Fire Service/Oil and Gas Fire Fighting

TECHNICAL DATASHEET PROPAK-F-EZ-FLO SELF CONTAINED BREATHING APPARATUS DESCRIPTION The Scott Safety ProPak-F-EZ-FLO is a Type 2 open circuit, self-contained, compressed air breathing apparatus. It consists of a back plate, padded carrying harness and pneumatic system, containing a cylinder connector, reducer, pressure gauge, whistle and demand valve. The ProPak-F-EZ-FLO can be configured in a number of different ways with various size single cylinders. There are also a range of variants available including Airline (AC), Split Demand Valve Coupling (SDC or Y2C), Quick Connect Option or Duo variants. The ProPak-F-EZ-FLO is used in conjunction with AV3000HT facemask and a choice of composite or steel cylinders. APPLICATIONS The ProPak-F-EZ-FLO is specifically designed as a professional fire fighting SCBA, but is also suitable for providing respiratory protection in any IDLH environment. Approvals CE marked in accordance with EN137:2006: Type 2 AS1716

TECHNICAL DATASHEET Technical Specifications Materials Pressure Reducing Valve Rust Tube (Cyls) Reducing Valve Seat O-Rings Reducing Valve Springs HP Pressure Gauge HP Pressure Gauge Cover MP Air Supply Hose Fittings Facemask Facemask Visor MP Air Supply Hose HP Air Hose Valve Handwheel (Sabre Cyls) Harness Backplate Backpad Cylinder Band Strap Buckles Cylinder Cylinder Valve Demand Valve Casing Nickel Plated Brass Brass Polyamide (Nylon) Nitrile, Silicone, EPDM Stainless Steel Stainless Steel, Polycarbonate Lens Neoprene Nickel Plated Brass Neoprene, Silicone or Procomp Polycarbonate EPDM Cover, fabric braid reinforcement, EPDM liner PTCFE liner, stainless steel braiding, Estane sleeve Glass filled Polyamide/ TPE Kevlar and Pyrogard blend webbing with FR Proban covered flame retardant foam. Reflective thread Glass & Carbon filled Nylon composite Flame retardant cross linked polyolefin closed cell foam covered in a Proban fabric Kevlar and Pyrogard blend webbing, Reflective thread Glass filled polyamide Steel or Composite Nickel Plated Brass Glass filled nylon MAINTENANCE/CLEANING/SERVICING N.B. - Cleaning should only be carried out as specified in the user instructions. Maintenance and Servicing must only be performed by trained personnel following the procedures in the Service and Maintenance manual.

TECHNICAL DATASHEET Technical Specifications EZ-Flo Demand Valve Ergonomically designed demand valve featuring low breathing resistance, anti fogging spray bar and automatic first breath activation. First breath activation -12.5 to -7.5 mbar Bypass flow Variable between 130 to 295 lpm Reducing Valve First stage pressure reducing valve featuring non-adjustable, spring loaded piston mechanism and outlet supply protected by pressure relief valve. Valve body and cap machined from nickel-plated brass with stainless steel spring and hose retainer Uclips. Outlet Pressure 200 bar inlet 5.5 to 9.5 bar 300 bar inlet 6.0 to 11.0 bar Pressure relief valve protected Approx. 13.5 bar Flow restrictor to gauge supply hose <25 litres minute Pressure Indicator & Warning Whistle Bourdon tube type dial indicator Heat and impact resistant Polycarbonate lens Safety blow-out vent in rear of gauge Accuracy +/- 10 bar between 40-300 bar Hoses Stainless Steel swivel hose fittings Medium Pressure Hose Maximum working pressure 16 bar Minimum burst pressure 80 bar High Pressure hose Maximum working pressure 450 bar Minimum burst pressure 800 bar Weight/ Dimensions Single configuration (less 3.3KG cylinder) Single configuration & facemask (less cylinder) Length Width Depth (with 6.0 litre 200 bar cylinder) 4.3KG 630mm 285mm 220mm

S & S PROPAK-EZ-FLO SELF CONTAINED BREATHING APPARATUS Is the ProPak-EZ-FLO CBRN approved? Yes, when fitted with the CBRN EZ-FLO the set is approved. What does the Type 2 signify? What is the ProPak-EZ-FLO range? The ProPak-EZ-FLO range is the latest high technology open-circuit, self contained, compressed air breathing apparatus range from Scott Safety. It combines Scott s proven performance and safety features with enhanced user comfort and a range of optional accessories to meet various user requirements. Is the backplate adjustable to cater for people of different heights? The backplate has been designed as standard to fit people of all sizes however for those that specify adjustment the ProPak-FX-EZ-FLO is the adjustable version of the ProPak-EZ-FLO. It is adjustable to 3 different settings to fit people of different sizes. Are they approved to the latest standards? The Type 2 section of the standard is specifically for breathing apparatus sets which will be used for fire-fighting use and incorporates the full flame engulfment test. What does this flame engulfment test involve? The test involves the set being conditioned in an oven at 90 o C for 15 minutes; it is then transported to the flame test rig within 30 seconds where it is completely engulfed in flames at 1000 o C for 10 seconds. After these flames have been extinguished there should not be any after flame for more than five seconds. The set is then dropped freely from 15cm onto the ground and the harness must retain its integrity and not break. All the time the set s breathing performance must remain within parameters at 25 cycles of 2 litres per minute. This means the ProPak-EZ-FLO is incredibly durable. Has the backplate been designed ergonomically? Yes. Yes, they are approved to EN137:2006 Type 2 and the Australian Standard AS1716.

S & S How does the size adjustment work on the FX version of the ProPak-EZ-FLO? The waistbelt has been designed so that it can be set in 3 positions for people of various heights. The adjustment is done by squeezing a catch which enables the waistbelt to be slid into each of these positions. Releasing the catch locks the waist belt in place. The benefit of this system is that the set can be adjusted without removing the cylinder from the set and even when the set is held in its bracket on the fire appliance. A further advantage of this style of adjustment is that the top of the cylinder always stays in the same position relative to the users head and so is not pushed upwards blocking the users ability to look up when standing or crawling. Is the set NFPA approved? The ProPak-EZ-FLO is not NFPA approved, the two standards (NFPA and EN) are mutually exclusive, i.e. it is not possible to have the same standard on both sets. This is because of conflicting clauses such as type of cylinder connector or the marking on gauges. The NFPA flame engulfment test has effectively been included into Type 2 of EN137:2006 so the standards have the same flame test levels. Can the ProPak-EZ-FLO be used with 2 cylinders? The standard ProPak-EZ-FLO is a single cylinder set, however there is a ProPak-EZ-FLO Duo available that can be used in single or duo mode. Can the ProPak-EZ-FLO be supplied with attachments? Yes, the ProPak-EZ-FLO can be supplied with an Airline attachment (AC), which supplies air in and out of the set. It can therefore be used as Rescue Second Man attachment (RSM) to take air out of one set to supply two facemasks and as a Decontamination attachment (DC). It can also be used for airline working. Options for a Y-Piece (Y2C) in the demand valve to act as an RSM are also available. These attachments use CEN type couplings as standard but it is possible to specify different couplings if required. Can the ProPak-EZ-FLO be ordered with a split demand valve? Yes, the ProPak-EZ-FLO can be supplied with a split demand valve (SDC). The couplings that are used are CEN type couplings. Also available as a Y2C connection which can be used with both SDC & RSM attachment. What is the weight of the ProPak-EZ-FLO set? The weight of the ProPak-EZ-FLO is dependent on the type of cylinder that is being used. The weight of a steel cylinder is greater than a composite cylinder and even the amount of air in the cylinder can have a surprising effect. The ProPak-F-EZ-FLO, less the cylinder and the facemask, weighs approx. 3.3kg and the ProPak-FX-EZ-FLO weighs approx. 3.5kg. Which facemasks can be used with the ProPak-EZ- FLO? The AV3000HT is the only mask approved with the ProPak-EZ-FLO. Is a carrying case available? Yes, a rigid hard plastic case is available for the ProPak-EZ-FLO. The hard cases with non-skid surfaces are stackable to permit easy SCBA storage.

S & S How does the ProPak-EZ-FLO cylinder retention system work? The retention system uses a durable Kevlar blend retention strap fastened by means of a camover-centre slide and double locking catch. This arrangement easily permits ease of cylinder changes and readily accommodates the complete range of cylinders. Can the pneumatics be easily removed from the backplate? Yes, the pneumatics can be removed (or replaced) from the sets in under 30 seconds without the use of tools. The pneumatics are removed in one piece and do not therefore have to be tested when this is done. Is the ProPak-EZ-FLO user serviceable? The ProPak-EZ-FLO is fully user serviceable. The user can service and test each part of the set with no need for any of it to be returned to the factory. To carry out this servicing the user must be trained by a qualified person. The harness is manufactured from Kevlar TM and Pyrogard TM blend webbing and the padding is covered by Proban. Both materials are flame retardant and giving the maximum protection against flames. What pressure cylinders can the ProPak-EZ-FLO use? The ProPak-EZ-FLO cylinder connector will accept both 200 and 300 bar cylinders without having to make any changes. What size cylinders can the ProPak-EZ-FLO use? The ProPak-EZ-FLO is approved with a full range of cylinders from 3 litre through to 9 litre, both composite and steel. What is the cylinder connection type? The cylinder connector is designed to connect into valves with outlets in accordance with EN144-2. This is the standard EN outlet type for breathing apparatus cylinder. What are the servicing intervals? The standard servicing intervals on the ProPak- EZ-FLO are annual sintered filter replacement and test, then a full service every 6 years. If the set is tested dynamically every year then there is no mandatory servicing for 12 years. Is the ProPak-EZ-FLO covered by a warranty? Yes, Scott can offer a wide range of warranty options with the ProPak-EZ-FLO. What material is the harness made from?

AV3000HT POSITIVE PRESSURE FACEMASK The AV3000HT is a high performance positive pressure facemask, manufactured using innovative materials which have been engineered to provide enhanced thermal durability and improved wearer safety in the most extreme conditions. The face seal utilizes proven SureSeal technology for maximum comfort, the dual seal provides a secure fit, the Kevlar head harness eliminates discomfort under helmets and the large visor provides excellent vision. Dual speech diaphragms offer enhanced voice transmission around the wearer, with optional right or left Epic Communications bracket for maximum versatility. PRODUCT HIGHLIGHTS Approved to EN136 Class 3, * BS 8468-1 High performance lens and bezel for improved thermal performance High temperature visor Right or left Epic Communications bracket for maximum versatility Speech diaphragm on both sides for improved voice transmission Kevlar head harness suitable for Fire and CBRN applications Anti-fog coating on lens to reduce fogging Thermal performance passes NFPA thermal radiant heat requirement of 15Kw/M2 Available in 3 sizes

AV3000 HT HIGH TEMPERATURE POSITIVE FACEMASK Smaller, Kevlar head harness eliminates bunching and discomfort under helmets Utilises proven Sureseal technology for enhanced comfort, fit and performance High performance lens and bezel for improved thermal performance Right of left communications bracket for maximum versatility High visibility inhalation valves allow for easy inspection Positioning tab assists with proper and quick donning Dual speech diaphragms for enhanced voice transmission around the wearer APPROVED CONFIGURATIONS PROPAK-F-EZ-FLO PROPAK-FX-EZ-FLO EPIC SCOTT SIGHT Ordering Information Part Number Description 8005242 AV3000HT Small Faceseal 8005243 AV3000HT Medium Faceseal 8005244 AV3000HT Large Faceseal 8005245 AV3000HT S Faceseal RECB 8005246 AV3000HT M Faceseal RECB 8005247 AV3000HT L Faceseal RECB 8005248 AV3000HT S Faceseal LECB 8005249 AV3000HT M Faceseal LECB 8005250 AV3000HT L Faceseal LECB * BS 8468-1 approved when used with a Propak-F or FX-EZ-FLO-CBRN.

TECHNICAL DATASHEET AV3000HT POSITIVE PRESSURE FACEMASK DESCRIPTION The AV3000HT is a high performance positive pressure facemask, manufactured using innovative materials which have been engineered to provide enhanced thermal durability and improved wearer safety in the most extreme conditions. The face seal utilizes proven SureSeal technology for maximum comfort, the dual seal provide secure fit, the Kevlar head harness eliminates discomfort under helmets and the large visor provides excellent vision. Dual speech diaphragms offer enhanced voice transmission around the wearer, with optional right or left Epic Communications bracket for maximum versatility. APPLICATIONS The AV3000HT is specifically designed for Professional Fire Fighting in conjunction with the Propak range of breathing apparatus offers respiratory protection in IDLH environments. If used with the CBRN EZ-Flo demand valve then the breathing apparatus also offers CBRN protection. Approvals CE marked in accordance with EN136 Class III CE marked in accordance with EN137:2006 Class II when used in conjunction with Scott Propak AS1716/NZ BS8468 when used in conjunction with Scott Propak-EZ-FLO-CBRN

TECHNICAL DATASHEET Technical Specifications Materials Visor Speech Diaphragm Inhalation Valve Visor Surround Faceseal Inner Mask Screws Nuts Buckles Headharness Neck Strap Packing specification Transparent Polycarbonate Polymide Film, EPDM Rubber, Aluminum Alloy, Nylon, Neoprene Silicon Rubber Polyphthalamide Polyisoprene Rubber Valox 30% GF, Silicon Rubber Stainless Steel Nickel plated brass Low Carbon Steel and Brass Kevlar Knit Fabric, Kevlar Thread, PBI, Lycra, FR Flex, Non-Elastic Reflective Fabric Kevlar 265x190x150m 0.75kg MAINTENANCE/CLEANING/SERVICING N.B. - Cleaning should only be carried out as specified in the user instructions. Maintenance and Servicing must only be performed by trained personnel following the procedures in the Service and Maintenance manual.

S & S AV3000HT POSITIVE PRESSURE FACEMASK Will I need to do a new fit test before putting this facepiece into use? Yes, as with all styles of facemask a facefit test will be required prior to use. How many sizes are available for the AV3000HT facepiece? What is the AV3000HT Facepiece? AV3000HT is a new facepiece which can be used in conjunction with Propak-EZ-Flo. AV3000HT utilizes proven SureSeal technology for maximum comfort and secure fit. This facemask will accept accessories such as the Epic 3 communication system along with the industry first In-mask thermal intellegence system. What is the AV3000HT approved to? The AV3000HT is approved to EN136:1998 Class 3 Is the AV3000HT approved with all Scott Safety SBCA? No, AV3000HT is approved for use with Propak- EZ-Flo-F and Propak-EZ-Flo-FX only. Three sizes, Small, Medium and Large Are there multiple nosecup sizes available for the AV3000HT facepiece? Three sizes of nosecup are available, Small, Medium and Large Are there multiple head harnesses available for the AV3000HT facepiece? The AV3000HT is available with a Kevlar headharnes which has undergone full flammability testing according to EN136:1998. What does the HT mean? The HT in AV3000HT is for High Temperature Visor, the thermal performance passes the NFPA thermal radiant heat requirement of 15Kw/M2

S & S Is AV3000HT apporved for CBRN? Is the AV3000HT serviceable? AV3000HT is approved to BS 8468 when used with a Propak-EZ-Flo-CBRN Variant Can AV3000HT be used with Epic 3 Voice amp and RI? Yes AV3000HT will accept the Epic 3 voice communication system when ordered with the communication bracket installed on either the left or right side. Can AV3000HT be fitted with Scott Sight? Yes AV3000HT will accept the Scott Sight thermal intellegence system, you can order this already fitted or there will be an option for upgrading your facepiece in the future. Please be aware that Scott Sight is fitted to the right hand side so Epic communication bracket will need to be on the left side. The AV3000HT is fuly serviceable. The user can service each part of the mask with no need to return any of it to the factory. To carry out the servicing the user must be trained by a qualified person. What are the servicing intervals? What is the weight of the AV3000HT? 744 Grams

Scott Safety is committed to providing outstanding, reliable safety equipment to those whose lives depend on it. Thousands of safety workers, firefighters, police, civil defence and military personnel have counted on Scott for innovative product design which pushes the boundaries of worker safety. We ve built a solid reputation on our attention to detail, rigorous quality assurance and exceptional service. Scott Safety is a global business that supplies a variety of industries through manufacturing facilities located in the United States, United Kingdom, Asia and Australia. Pimbo Road Skelmersdale Lancashire England WN8 9RA Telephone: +44 (0) 1695 711711 Fax: +44 (0) 1695 711772 2016 Scott Safety. SCOTT, the SCOTT SAFETY Logo, Scott Health and Safety, ProPak-EZ-FLO, AV300HT are registered and/or unregistered marks.