MATERIAL SAFETY DATA SHEET "W" TEST SOLUTION NFPA HAZARD RATINGS* 2 Moderate health hazard 3 Highly flammable SECTION 1: PRODUCT INFORMATION

Similar documents
APOG - AMERICAN PAINT, OIL & GREASE REMOVER

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

Safety Data Sheet 1818BR

Safety Data Sheet 1533BR

MATERIAL SAFETY DATA SHEET Complies with OSHA Hazard Communication Standard 29 CFR

Material Safety Data Sheet. Propylene Glycol 38% Section 1: PRODUCT INFORMATION. Manufacturer: Various Manufacturers. Section 2: HAZARDOUS INGREDIENTS

Material Safety Data Sheet

MATERIAL SAFETY DATA SHEET PAGE 1

MATERIAL SAFETY DATA SHEET. Quick Identifier (In Plant Common Name): SP-101

Material Safety Data Sheet PRODUCT CODE NUMBERS: DYND75221

MATERIAL SAFETY DATA SHEET Complies with OSHA Hazard Communication Standard 29 CFR

Safety Data Sheet 1565BR

MATERIAL SAFETY DATA SHEET

Safety Data Sheet 1797SYM

Safety Data Sheet 1225BR

Safety Data Sheet LPS300 and LPS301

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET General Finishes Corporation. SECTION 2: Composition/Information on Ingredients

SAFETY DATA SHEET. Great Lakes Orthodontics 200 Cooper Ave Tonawanda, NY CHEMTREC:

LUMINOX. Section 1 : PRODUCT AND COMPANY IDENTIFICATION

Safety Data Sheet 1432BR

Safety Data Sheet 1452SYM

Safety Data Sheet 1628SYM

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET. Section I Identification. Section II Hazardous Ingredients

Material Safety Data Sheet

MATERIAL SAFETY DATA SHEET

SAFETY DATA SHEET SECTION 1 IDENTIFICATION. MB4908 Product Line

CYCLO INDUSTRIES, INC MATERIAL SAFETY DATA SHEET

Safety Data Sheet 1454

Safety Data Sheet 1421

THE ANDERSONS SAFETY DATA SHEET DATE PREPARED: 01/25/07 CURRENT AS OF: 6/2/15

Kardol Quality Products 285 S. West Street Lebanon, Ohio Fax:

MATERIAL SAFETY DATA SHEET

Safety Data Sheet 1126SYM

BUDGET MOLDERS SUPPLY, INC CORPORATE PARK DRIVE MACEDONIA, OHIO MATERIAL SAFETY DATA SHEET MSDS NO.: DATE: May 22, 2007

Safety Data Sheet. Trade Name: RNase A. Revision Date: 12/30/2016 SECTION 1. IDENTIFICATION OF PRODUCT AND COMPANY: RNase A

MATERIAL SAFETY DATA SHEET

Name: SoluDent 30 Concentrate Developer Product Number: , Product Use: Photographic Developer

14 FORTUNE DRIVE PRODUCT NAME: EPO-TEK H20E, Part A BILLERICA, MA 01821

Carcinogen: NTP (No) IARC (No) OSHA (No) DATE REVISED: 6/5/01 REV: A * HMIS CODE ratings are estimated by Epoxy Technology.

Air Tool Lubricant MSDS. Air Tool Lubricant. (800) (Poison Control USA) 24 Hours (800) (CHEMTREC) 24 Hours. Not Applicable - Mixture

SAFETY DATA SHEET Lead Stop

MATERIAL SAFETY DATA SHEET

Material Safety Data Sheet

Material Safety Data Sheet

MATERIAL SAFETY DATA SHEET PAGE 1

MATERIAL SAFETY DATA SHEET Certis USA 9145 Guilford Road, Suite 175 Columbia, Maryland 21046

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET Date Revised: 7/18/2013 Page: 1 Mold Release MSDS Number: SECTION 1. CHEMICAL PRODUCT AND COMPANY IDENTIFICATION

1050 Joshua Way Vista, CA (Customer Service)

MATERIAL SAFETY DATA SHEET

Rest Easy SECTION 1 - IDENTIFICATION SECTION 2 - INGREDIENTS. The remaining components of this product comprise proprietary information.

MATERIAL SAFETY DATA SHEET

24 hour Emergency Telephone Contact Number Chauvet

7031 SW 22 Court, Davie, FL (866) 637-ROOF (7663) Fax: (941) Final Flat Roof MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

SAFETY DATA SHEET (SDS) Stick-It! Rear View Mirror Adhesive

MATERIAL SAFETY DATA SHEET SPRAY 'N' LIFT/LABEL REMOVER AUGUST Distributor's name and address

1461BR Lindell Rd Las Vegas, NV (Customer Service) (800) USA (813) International (Chemtel 24 hrs)

SAFETY DATA SHEET. Section 1: Product and Company Identity

SAFETY DATA SHEET. CU-8120 Enzyme & bacteria digestive powder. None. (800) (800) Category 5 Category 3 Category 2B

SECURITY COAT. Section 1 : PRODUCT AND COMPANY IDENTIFICATION. Section 2 : INGREDIENT INFORMATION

3. COMPOSITION / INFORMATION ON INGREDIENTS

* HMIS CODE ratings are estimated by Epoxy Technology. II. HAZARDOUS INGREDIENTS CAS# WT % TOXICITY DATA

LIQUINOX MSDS. Section 1 : PRODUCT AND COMPANY IDENTIFICATION. Section 2 : INGREDIENT INFORMATION. Ingredient Name T.L.V.

Material Safety Data Sheet Pyridine-Barbituric Acid Solution. Section 1 - Chemical Product and Company Identification

MSDS THE PENRAY COMPANIES, INC.

Safety Data Sheet 1782SYM

MATERIAL SAFETY DATA SHEET TRAXIT % CAS# EXPOSURE LEVELS LD (50), ROUTE, SPECIES

Material Safety Data Sheet EDTA Titrant, 0.005M M, 5% w/v. Section 1 - Chemical Product and Company Identification

MATERIAL SAFETY DATA SHEET

Material Safety Data Sheet

The RectorSeal Corporation Chemtrec 24 Hours 2601 Spenwick Drive (800) Houston, Texas USA

MATERIAL SAFETY DATA SHEET

Fire and Explosion Data. Fire Point...: NG Auto Ignition...: NG Lower Explosion Limit : NA Upper Explosion Limit : NA

S A F E T Y D A T A S H E E T

Safety Data Sheet. Issue date: 2/16/2015. ACS Pro D Dishmachine Detergent

Rust Check Corporation Rust Inhibitor MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

Material Safety Data Sheet Grams Iodine Solution. Section 1 - Chemical Product and Company Identification

Safety Data Sheet Cytology Fixative Spray

1. Identification of the substance/mixture and of the company/undertaking

1. PRODUCT AND COMPANY IDENTIFICATION

MATERIAL SAFETY DATA SHEET. Quick Identifier (In Plant Common Name): PERFECTDATA ADHESIVE SPRAY

SECTION I - IDENTIFICATION

Disposal: Place empty container in trash. Give partial or full container to the safety officer.

MATERIAL SAFTEY DATA SHEET

Product Identification. Hazard Overview

MATERIAL SAFETY DATA SHEET

Material Safety Data Sheet

Product Identification

Material Safety Data Sheet Product No PELCO CryO-Z-T Issue Date ( ) Review Date ( )

MATERIAL SAFETY DATA SHEET

2. HAZARDS IDENTIFICATION GHS Classification: Acute oral toxicology 5, Acute dermal toxicaology 5, specific target organ toxicology 2

MATERIAL SAFETY DATA SHEET Artisan Penetrating Stone Sealer & Oil Repellent SECTION 1 PRODUCT NAME AND COMPANY IDENTIFICATION

MSDS AUTOGUARD DE-ICER Page 1 of 6. Address: 2340 U.S. Highway 301 North Dunn, NC 28334

M A T E R I A L S A F E T Y D A T A S H E E T

Weight percent. CAS No.

Transcription:

MATERIAL SAFETY DATA SHEET PRODUCT "W" TEST SOLUTION NFPA HAZARD RATINGS* Health Fire Stability 2 Moderate health hazard 3 Highly flammable 0 Stable SECTION 1: PRODUCT INFORMATION Manufacturer: ADCO Cleaning Products LLC, 900 W. Main, Sedalia, MO 65301 (660) 826-3300 EMERGENCY TELEPHONE NUMBERS: CHEMTREC (800) 424-9300 24 HRS 7 DAYS A WEEK; ADCO (800) 821-7556 (8-5 M-F) Intended Product Use: Testing for anionic detergent concentration Synonyms: SECTION 2: HAZARDOUS INGREDIENTS Chemical Name % CAS # OSHA PEL LD 50 Chloroform 91 67-66-3 50 ppm TWA oral: 908 mg/kg (rat) dermal: > 20 g/kg (rabbit) Isopropyl alcohol 8 67-63-0 400 ppm TWA oral: 5.8 g/kg (rat) dermal: 13 g/kg (rabbit) SECTION 3: PHYSICAL DATA Appearance: Clear liquid Boiling Point: 150 F Odor: Slightly sweet - ether like Solubility in Water: Slight Specific Gravity (20 C): 1.381 Vapor Pressure (mm Hg): 190 @ 68 F ph (Water Solution): No data Vapor Density: No data SECTION 4: FIRE AND EXPLOSION HAZARD DATA Upper Flammable Limit: No data Flash Point (Method)( F): 77 (TCC) Lower Flammable Limit: No data Extinguishing Media: Water fog, foam, dry chemical or carbon dioxide Special Fire Fighting Procedures: Cool fire exposed containers with water spray. Wear self-contained breathing apparatus. Unusual Fire and Explosion Hazards: Vapors may form flammable or explosive mixture with air. Vapors are intoxicating and toxic. Stability: Stable SECTION 5: REACTIVITY DATA Conditions to Avoid: Use or storage at high temperatures. Incompatibility (materials to avoid): Hazardous Decomposition Products: Hazardous Polymerization: Strong oxidizers, strong bases. Do not store in aluminum containers. Burning produces toxic fumes. Will not occur SECTION 6: HEALTH HAZARD DATA Toxicity (Estimated): Low - LD50 less than 1500 mg/kg Effects of Overexposure: Acute: Chronic: Vapors may cause dizziness, nausea, headache, and irritation to the eyes, nose, and lungs. Contact with eyes or skin may cause drying and irritation. Exposure may cause central nervous system (CNS) depression and increased myocardial irritability. Prolonged exposure may cause liver and kidney damage, CNS depression, low blood pressure, and rapid heartbeat. Some animal sutdies at high dose have shown increased toxicity to pregnant rats and rabbits and decreased fetal weight. Carcinogenicity: Chloroform is listed by NTP as a probable carcinogen, as an A-2 chemical by ACGIH, and is also listed by the state of California to cause cancer. *Hazard ratings and other information are based on latest available information from tests on product or ingredients of mixtures. The data and evaluations are accurate to the best of ADCO's knowledge. No guarantee or liability is expressed or implied.

"W" Test Solution EXPOSURE LIMITS IRRITANCY OF PRODUCT SENSITIZATION TO PRODUCT CARCINOGENICITY Chloroform listed as "R" by NTP, "A-2" 50 ppm TWA (chloroform) : 400 ppm No effects reported reported by ACGIH and is listed by the state of TWA (isopropyl alcohol) California to cause cancer. TERATOGENICITY REPRODUCTIVE TOXICITY MUTAGENICITY SYNERGISTIC PRODUCTS No effects reported No effects reported reported reported SPECIAL PROTECTION INFORMATION Based on known toxicity of components. No test data available on mixture. SECTION 7: PREVENTATIVE MEASURES Respiratory Protection: required when used as directed with adequate ventilation. When cleaning up large spills in confined areas, self-contained breathing apparatus is recommended Ventilation: Normal industrial ventilation is adequate. Local exhaust at work station recommended. Protective Gloves: Ordinarily not needed. Use chemically resistant gloves when contact is prolonged or frequent. Eye Protection: Use goggles or face mask if splashing is likely. Other protection equipment ordinarily not needed. Availability of eye washes and adequate ventilation in work areas recommended. STORAGE AND HANDLING: SPILL OR LEAK PROCEDURES: WASTE DISPOSAL METHOD: Store in closed containers in cool (below 120 F) well ventilated location. Do NOT store in aluminum containers. Leave adequate headspace for thermal expansion (at least 10% of container volume). Keep from sources of ignition. Small spills - allow to evaporate with adequate ventilation. Soak up the larger spills on absorbent material and transfer to resealable containers for disposal. Dispose of product on absorbent material in manner complying with all local, state, and federal regulations for combustible or chlorinated hydrocarbons. RECOMMENDED PRECAUTIONARY LABELING: CAUTION: Flammable. Keep from heat and open flames. Use with adequate ventilation. Avoid prolonged breathing of vapors. May cause dizziness, nausea, headache, and/or irritation to eyes, nose, and lungs. Contact with eyes or skin may cause drying and irritation. Harmful if swallowed. Contains chloroform, an A-2 carcinogen. FIRST AID: Remove person overcome by vapors to fresh air. In case of contact, flush eyes for 15 minutes with water. Wash off of skin with soap and water. If swallowed, give large amount of water. Do NOT induce vomiting. Call physician. KEEP OUT OF REACH OF CHILDREN. DO NOT TAKE INTERNALLY. This product is intended for professional use only by trained personnel. Inhalation: Remove person overcome by vapors to fresh air. Eyes: Flush eyes for 15 minutes with water. Skin: Wash off of skin with soap and water. SECTION 8: FIRST AID Ingestion: If swallowed, give large amounts of water and do NOT induce vomiting. Call physician. IF SYMPTOMS PERSIST, SEEK MEDICAL ASSISTANCE SECTION 9: SARA TITLE III NOTE: This product does contain some components which are under the reporting requirements of SARA Title III, Section 313. If you are required to report discharges using Form R, SARA Title III, Section 313, information is available on amounts of reportable components. SECTION 10: PREPARATION DATE This information is provided for guidance only based on information we have compiled. No guarantee of accuracy or completeness is expressed or implied. ADCO RESEARCH DEPARTMENT Prepared by: Julie D. Hirner Date: April 21, 2010 Replaces MSDS of: November 7, 2008

MATERIAL SAFETY DATA SHEET PRODUCT "X" TEST SOLUTION NFPA HAZARD RATINGS* Health Fire Stability 1 Slight health hazard 0 Noncombustible 0 Stable SECTION 1: PRODUCT INFORMATION Manufacturer: ADCO Cleaning Products LLC, 900 W. Main, Sedalia, MO 65301 (660) 826-3300 EMERGENCY TELEPHONE NUMBERS: CHEMTREC (800) 424-9300 24 HRS 7 DAYS A WEEK; ADCO (800) 821-7556 (8-5 M-F) Intended Product Use: Indicator for testing anionic detergent concentration Synonyms: SECTION 2: HAZARDOUS INGREDIENTS Chemical Name % CAS # OSHA PEL LD 50 SECTION 3: PHYSICAL DATA Appearance: Blue solution Boiling Point: No data Odor: Solubility in Water: Soluble Specific Gravity (20 C): 1.004 Vapor Pressure (mm Hg): No data ph (Straight): 5-5.5 Vapor Density: No data SECTION 4: FIRE AND EXPLOSION HAZARD DATA Flash Point (Method)( F): (TCC) Extinguishing Media: Special Fire Fighting Procedures: Not combustible Upper Flammable Limit: No data Lower Flammable Limit: No data Unusual Fire and Explosion Hazards: Contains blue dye. If dissolved in water it may leave a blue stain. Stability: Stable SECTION 5: REACTIVITY DATA Conditions to Avoid: No special conditions Incompatibility (materials to avoid): Hazardous Decomposition Products: Hazardous Polymerization: Alkaline materials - oxidizing agent Will not occur SECTION 6: HEALTH HAZARD DATA Toxicity (Estimated): Effects of Overexposure: Low Acute: Chronic: May cause very slight irritation to eyes and skin. Carcinogenicity: of the ingredients of this mixture have been identified as a carcingen or probable carcingen by ACGIH, IARC, or OSHA. *Hazard ratings and other information are based on latest available information from tests on product or ingredients of mixtures. The data and evaluations are accurate to the best of ADCO's knowledge. No guarantee or liability is expressed or implied.

"X" Test Solution EXPOSURE LIMITS IRRITANCY OF PRODUCT SENSITIZATION TO PRODUCT CARCINOGENICITY Not listed by OSHA No effects reported reported No components are listed by ACGIH, IARC, or OSHA TERATOGENICITY REPRODUCTIVE TOXICITY MUTAGENICITY SYNERGISTIC PRODUCTS No effects reported No effects reported reported reported Based on known toxicity of components. No test data available on mixture. SECTION 7: PREVENTATIVE MEASURES SPECIAL PROTECTION INFORMATION Respiratory Protection: required when used as directed with adequate ventilation. Ventilation: Normal industrial ventilation is adequate. Protective Gloves: Ordinarily not needed. Use chemically resistant gloves when contact is prolonged or frequent. Eye Protection: Use goggles or face mask if splashing is likely. Other protection equipment ordinarily not needed. Availability of eye washes and adequate ventilation in work areas recommended. STORAGE AND HANDLING: SPILL OR LEAK PROCEDURES: Do not expose to light - will fade dye. Avoid contact with clothing and skin, it will leave a blue stain difficult to remove. Not a hazardous waste. If spilled, sweep up or wipe up. Flush to sewer with water. WASTE DISPOSAL METHOD: Flush to sewer or dispose of in nonhazardous landfill. Empty container should be rinsed with water before disposal. RECOMMENDED PRECAUTIONARY LABELING: CAUTION: Contact with product may cause irritation to eyes or skin. Harmful if swallowed. FIRST AID: In case of contact, flush eyes for 15 minutes with water. Wash off of skin with soap and water. If swallowed, give two glasses of water and induce vomiting. Call physician. KEEP OUT OF REACH OF CHILDREN. DO NOT TAKE INTERNALLY. This product is intended for professional use only by trained personnel. Inhalation: No treatment necessary. Eyes: Flush eyes for 15 minutes with water. Skin: Wash off of skin with soap and water. SECTION 8: FIRST AID Ingestion: If swallowed, give Milk of Magnesia, or milk to soothe irritation. If large quantity is ingested, then induce vomiting. IF SYMPTOMS PERSIST, SEEK MEDICAL ASSISTANCE SECTION 9: SARA TITLE III NOTE: This product does contain some components which are under the reporting requirements of SARA Title III, Section 313. If you are required to report discharges using Form R, SARA Title III, Section 313, information is available on amounts of reportabl SECTION 10: PREPARATION DATE This information is provided for guidance only based on information we have compiled. No guarantee of accuracy or completeness is expressed or implied. ADCO RESEARCH DEPARTMENT Prepared by: Julie D. Hirner Date: April 21, 2010 Replaces MSDS of: August 25, 2008

MATERIAL SAFETY DATA SHEET PRODUCT "Y" TEST SOLUTION NFPA HAZARD RATINGS* Health Fire Stability 2 Moderate health hazard 3 Highly flammable 0 Stable SECTION 1: PRODUCT INFORMATION Manufacturer: ADCO Cleaning Products LLC, 900 W. Main, Sedalia, MO 65301 (660) 826-3300 EMERGENCY TELEPHONE NUMBERS: CHEMTREC (800) 424-9300 24 HRS 7 DAYS A WEEK; ADCO (800) 821-7556 (8-5 M-F) Intended Product Use: Testing of anionic detergents Synonyms: SECTION 2: HAZARDOUS INGREDIENTS Chemical Name Isopropyl alcohol % 10-30 CAS # 67-63-0 OSHA PEL 400 ppm TWA LD 50 oral: 5.8 g/kg (rat) dermal: 13 g/kg (rabbit) Ethylene glycol 15-40 107-21-1 50 ppm TWA oral: >6000 mg/kg (rat) SECTION 3: PHYSICAL DATA Appearance: Clear liquid Boiling Point: 155 F Odor: Like alcohol Solubility in Water: Miscible Specific Gravity (20 C): 0.893 Vapor Pressure (mm Hg): 32 ph: NA Vapor Density: No data SECTION 4: FIRE AND EXPLOSION HAZARD DATA Upper Flammable Limit: No data Flash Point (Method)( F): 85 (TCC) Lower Flammable Limit: No data Extinguishing Media: Foam, carbon dioxide, dry chemical, water fog Special Fire Fighting Procedures: Cool fire exposed containers with water spray Unusual Fire and Explosion Hazards: Vapors may form combustible or explosive mixtures with air SECTION 5: REACTIVITY DATA Stability: Stable Conditions to Avoid: Storage or use above 110 F Incompatibility (materials to avoid): Hazardous Decomposition Products: Hazardous Polymerization: Strong oxidizers, stron acids Carbon dioxide, carbon monoxide Will not occur SECTION 6: HEALTH HAZARD DATA Toxicity (Estimated): Effects of Overexposure: Slight Acute: Chronic: Contact with eyes or skin may cause moderate irritation. Vapors may cause dizziness and irritation to eyes, nose, and lungs. Carcinogenicity: of the ingredients of this mixture have been identified as a carcinogen or probable carcinogen by ACGIH, IARC, or OSHA. *Hazard ratings and other information are based on latest available information from tests on product or ingredients of mixtures. The data and evaluations are accurate to the best of ADCO's knowledge. No guarantee or liability is expressed or implied.

"Y" Test Solution EXPOSURE LIMITS IRRITANCY OF PRODUCT SENSITIZATION TO PRODUCT CARCINOGENICITY 50 ppm TWA (ethylene glycol) : 400 ppm TWA (isopropyl alcohol) Moderate eye and skin reported No components are listed by ACGIH, IARC, or OSHA TERATOGENICITY REPRODUCTIVE TOXICITY MUTAGENICITY SYNERGISTIC PRODUCTS No effects reported No effects reported reported reported SPECIAL PROTECTION INFORMATION Based on known toxicity of components. No test data available on mixture. SECTION 7: PREVENTATIVE MEASURES Respiratory Protection: required when used as directed with adequate ventilation. When cleaning up large spills in confined area, self-contained breathing apparatus is recommended. Ventilation: Normal industrial ventilation is adequate. Local exhaust at work staion recommended. Protective Gloves: Ordinarily not needed. Use chemically resistant gloves when contact is prolonged or frequent. Eye Protection: Use goggles or face mask if splashing is likely. Other protection equipment ordinarily not needed. Availability of eye washes and adequate ventilation in work areas recommended. STORAGE AND HANDLING: SPILL OR LEAK PROCEDURES: WASTE DISPOSAL METHOD: Store in well ventilated area. Store in plastic or lined metal containers. Keep away from heat and open flames. Store away from strong oxidizers. Protect from moisture. Avoid breathing vapors. Keep open flames and ignition sources away. Flush small amount to drain with water. Liquid product is hazardous waste (combustible). When absorbed on solid material, it is not a hazardous material. Flush small spills to sewer with water. RECOMMENDED PRECAUTIONARY LABELING: CAUTION: Splashing into eyes or prolonged or repeated contact with skin may cause irritation. FIRST AID: In case of contact, flush eyes for 15 minutes with water. Wash off of skin with soap and water. If swallowed, induce vomiting immediately by giving two glasses of water and pressing finger down throat. Do not give liquids to an unconscious person. KEEP OUT OF REACH OF CHILDREN. DO NOT TAKE INTERNALLY. This product is intended for professional use only by trained personnel. Inhalation: Remove person overcome by vapors to fresh air. Administer oxygen if needed. Eyes: Flush eyes for 15 minutes with water. Skin: Wash off of skin with soap and water. Ingestion: Induce vomiting immediately as directed by medical personnel. Do not give liquids to an unconscious person. SECTION 8: FIRST AID IF SYMPTOMS PERSIST, SEEK MEDICAL ASSISTANCE SECTION 9: SARA TITLE III NOTE: This product does contain some components which are under the reporting requirements of SARA Title III, Section 313. If you are required to report discharges using Form R, SARA Title III, Section 313, information is available on amounts of reportable components. SECTION 10: PREPARATION DATE This information is provided for guidance only based on information we have compiled. No guarantee of accuracy or completeness is expressed or implied. ADCO RESEARCH DEPARTMENT Prepared by: Julie D. Hirner Date: April 21, 2010 Replaces MSDS of: November 7, 2008