Section : Well-Master Micro- + P eader lenair Well-Master TM Micro- Withstands Extreme igh Temperature Standard Micro- connectors are rated for +125. lenair's MWM Micro- can withstand +150 continuous operating temperature and can be upgraded to +200 if assembled with special high temperature epoxies. ut oil, gas and geothermal wells can subject electronic instruments to temperatures as high as +. The TM Series Micro- meets the need for a high density, high performance connector capable of handling this temperature. The TM features contacts made from a special alloy that resists softening when exposed to temperatures up to + (500 ). Rugged passivated stainless steel shells and hardware, high temperature liquid crystal polymer (LP) insulators and special epoxies allow these connectors to survive the most demanding environments. Unique angled mounting ears allow the Well-Master to fit in confined spaces. 1 2 3 4 5 + able onnector TM igh Temperature contact arrangements + Operating Temperature ngled Mounting Ears to it in Small iameter Instruments igh Reliability TwistPin ontact System with Special igh Temperature lloy.050" Pitch ontact Spacing for Reduced Size Solder up, Pre-Wired or P 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 9 10 11 6 7 8 9 9 10 11 12 13 14 15 12 13 14 15 16 17 18 19 20 21 9 15 21 1 2 3 4 5 6 7 8 9 1011 12 13 1 2 3 4 5 6 7 8 9 1011 12 13 14 15 16 1 2 3 4 5 6 7 8 9 10111213141516171819 14 15 16 17 18 19 20 21 22 23 24 25 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 25 31 37 Mating face of pin connector. Socket connector contact numbers are reversed. Materials and inishes ontacts Proprietary nickel alloy, gold plated Insulators Liquid crystal polymer (LP) Shell Stainless steel, passivated Mounting ardware Stainless Steel Potting ompound Epoxy Insulated Wire Nickel-coated copper, PTE insulation per M22759/87 ( ) Specifications urrent Rating 3 mps ontact Resistance 8 milliohms maximum ielectric Withstanding Voltage 600 Vac sea level Insulation Resistance 5000 megohms minimum Operating Temperature -55. to +. Shock 50 g. Vibration 20 g. -1
Micro- Well-Master Solder up onnectors TM Solder up onnectors TM Well-Master solder cup Micro- connectors withstand + continuous operating temperature. These.050" pitch Micro- connectors accept #26 to #30 gauge wire with standard contacts and up to size #24 wire with large bore contacts. ontacts are factory-installed and potted with epoxy. Pin contacts are gold-plated high performance twistpin type and are recessed into insulator to prevent damage. Special nickel alloy contact material resists softening in high heat. Machined passivated stainless steel shell. lass-filled high temperature LP thermoplastic insulators withstand soldering heat. Meets performance requirements of MIL-TL-83513. vailable with 9 to 37 contacts. 3., 600 Vac, -55 to +. igure 1 Pin (Plug) with Thru-ole Mounting ().096/.088 ia. (2.43/2.23) igure 2 Pin (Plug) with ackscrews Slot head (S) ex ead (M) igure 3 Pin (Plug) with Integral ackpost (P) TM Pin (Plug) Solder up onnectors or #26 W Wire No. of ontacts Type Thru-ole Mounting.092 ia. ig. 1 ackscrews ex ead igure 2 ackscrews Slot ead igure 2 Integral ackpost ig. 3 9 Pin TM-9PS TM-9PSM TM-9PSS TM-9PSP 15 Pin TM-15PS TM-15PSM TM-15PSS TM-15PSP 21 Pin TM-21PS TM-21PSM TM-21PSS TM-21PSP 25 Pin TM-25PS TM-25PSM TM-25PSS TM-25PSP 31 Pin TM-31PS TM-31PSM TM-31PSS TM-31PSP 37 Pin TM-37PS TM-37PSM TM-37PSS TM-37PSP TM Pin (Plug) Solder up onnectors or #24 W Wire No. of ontacts Type Thru-ole Mounting.092 ia. ig. 1 ackscrews ex ead igure 2 ackscrews Slot ead igure 2 Integral ackpost ig. 3 9 Pin TM-9PN TM-9PNM TM-9PNS TM-9PNP 15 Pin TM-15PN TM-15PNM TM-15PNS TM-15PNP 21 Pin TM-21PN TM-21PNM TM-21PNS TM-21PNP 25 Pin TM-25PN TM-25PNM TM-25PNS TM-25PNP 31 Pin TM-31PN TM-31PNM TM-31PNS TM-31PNP 37 Pin TM-37PN TM-37PNM TM-37PNS TM-37PNP -2
Well-Master Solder up onnectors Micro- TM Socket (Receptacle) Solder up onnectors or #26 W Wire igure 4 Socket (Receptacle) with Thru-ole Mounting ().096/.088 ia. (2.43/2.23) No. of ontacts Type Thru-ole Mounting.092 ia. ig. 4 ackscrews ex ead igure 5 ackscrews Slot ead igure 5 Integral ackpost ig. 6 9 Socket TM-9SS TM-9SSM TM-9SSS TM-9SSP 15 Socket TM-15SS TM-15SSM TM-15SSS TM-15SSP 21 Socket TM-21SS TM-21SSM TM-21SSS TM-21SSP 25 Socket TM-25SS TM-25SSM TM-25SSS TM-25SSP 31 Socket TM-31SS TM-31SSM TM-31SSS TM-31SSP 37 Socket TM-37SS TM-37SSM TM-37SSS TM-37SSP TM Socket (Receptacle) Solder up onnectors or #24 W Wire igure 5 Socket (Receptacle) with ackscrews Slot head (S) ex ead (M) No. of ontacts Type Thru-ole Mounting.092 ia. ig. 4 ackscrews ex ead igure 5 ackscrews Slot ead igure 5 Integral ackpost ig. 6 9 Socket TM-9ST TM-9STM TM-9STS TM-9STP 15 Socket TM-15ST TM-15STM TM-15STS TM-15STP 21 Socket TM-21ST TM-21STM TM-21STS TM-21STP 25 Socket TM-25ST TM-25STM TM-25STS TM-25STP 31 Socket TM-31ST TM-31STM TM-31STS TM-31STP 37 Socket TM-37ST TM-37STM TM-37STS TM-37STP igure 6 Socket (Receptacle) with Integral ackpost (P) -3
Micro- Well-Master Solder up onnectors TM solder cup dimensions: jackscrew and thru-hole versions Pin (plug) connector socket (receptacle) connector PIN 1 2X.086-56 UN.094 (2.39) SKT 1.094 (2.39) 2X.086-56 UN E.125 (13.40) Notes: 1. ackscrew version shown. Thru-hole version has (2).096/.088 (2.43/2.23) diameter mounting holes instead of jackscrews..125 (13.40) Max. Max. E Max. Max. Max. Layout In. ± 0.08 In. In. In. ± 0.08 In. In. 9P.785 19.94.565 14.35.290 7.37.181 4.60.131 3.33.199 5.05.405 10.29.390 9.91 9S.785 19.94.565 14.35.371 9.42.181 4.60 5.46.191 4.85.405 10.29.377 9.58 15P.935 23.75.715 18.16.440 11.18.331 8.41.131 3.33.199 5.05.555 14.10.390 9.91 15S.935 23.75.715 18.16.521 13.23.331 8.41 5.46.191 4.85.555 14.10.377 9.58 21P 1.085 27.43.865 21.97.590 14.99.481 12.22.131 3.33.199 5.05.705 17.91.390 9.91 21S 1.085 27.43.865 21.97.671 17.04.481 12.22 5.46.191 4.85.705 17.91.377 9.58 25P 1.185 30.01.965 24.51.690 17.53.581 14.76.131 3.33.199 5.05.805 20.45.390 9.91 25S 1.185 30.01.965 24.51.771 19.58.581 14.76 5.46.191 4.85.805 20.45.377 9.58 31P 1.335 33.91 1.115 28.32.840 21.34.731 18.57.131 3.33.199 5.05.955 24.26.390 9.91 31S 1.335 33.91 1.115 28.32.921 23.39.731 18.57 5.46.191 4.85.955 24.26.377 9.58 37P 1.485 37.72 1.265 32.13.990 25.15.881 22.38.131 3.33.199 5.05 1.105 28.07.390 9.91 37S 1.485 37.72 1.265 32.13 1.071 27.20.881 22.38 5.46.191 4.85 1.105 28.07.377 9.58-4
Well-Master Solder up onnectors Micro- TM solder cup dimensions: integral jackpost version Pin (plug) connector socket (receptacle) connector 2X.086-56 UN.190 (4.83) MIN EEP 2X.086-56 UN.180 (4.57) MIN EEP E PIN 1 SKT 1.094 (2.39).190/.185 (4.83/4.70).125 (13.40).125 (13.40) Layout Max. Max. E Max. Max. Max. In. ± 0.08 In. In. In. ± 0.08 In. In. In. 9P.785 19.94.565 14.35.290 7.37.181 4.60.131 3.33.199 5.05.405 10.29.390 9.91.420 10.67 9S.785 19.94.565 14.35.301 7.65.181 4.60 5.46.274 6.96.405 10.29.377 9.58 N/ N/ 15P.935 23.75.715 18.16.440 11.18.331 8.41.131 3.33.199 5.05.555 14.10.390 9.91.570 14.48 15S.935 23.75.715 18.16.451 11.46.331 8.41 5.46.274 6.96.555 14.10.377 9.58 N/ N/ 21P 1.085 27.43.865 21.97.590 14.99.481 12.22.131 3.33.199 5.05.705 17.91.390 9.91.720 18.29 21S 1.085 27.43.865 21.97.601 15.27.481 12.22 5.46.274 6.96.705 17.91.377 9.58 N/ N/ 25P 1.185 30.01.965 24.51.690 17.53.581 14.76.131 3.33.199 5.05.805 20.45.390 9.91.820 20.83 25S 1.185 30.01.965 24.51.701 17.81.581 14.76 5.46.274 6.96.805 20.45.377 9.58 N/ N/ 31P 1.335 33.91 1.115 28.32.840 21.34.731 18.57.131 3.33.199 5.05.955 24.26.390 9.91.970 24.64 31S 1.335 33.91 1.115 28.32.851 21.62.731 18.57 5.46.274 6.96.955 24.26.377 9.58 N/ N/ 37P 1.485 37.72 1.265 32.13.990 25.15.881 22.38.131 3.33.199 5.05 1.105 28.07.390 9.91 1.120 28.45 37S 1.485 37.72 1.265 32.13 1.001 25.43.881 22.38 5.46.274 6.96 1.105 28.07.377 9.58 N/ N/ -5
Micro- Well-Master Well-Master Pre-Wired onnectors TM Pre-Wired onnectors with + Mil Spec PTE/Polyimide Wire TM Well-Master pre-wired Micro- connectors withstand + continuous operating temperature. These.050" pitch Micro- connectors are terminated to #24 or #26 W insulated wire. Nickel-coated copper wire conforms to M22759/87, PTE/polyimide insulation. ontacts are crimped to wire, factory-installed and potted with epoxy. Pin contacts are gold-plated high performance twistpin type and are recessed into insulator to prevent damage. Special nickel alloy contact material resists softening in high heat. Machined passivated stainless steel shell. lass-filled high temperature LP thermoplastic insulators. 100% hi-pot tested. Meets performance requirements of MIL-TL-83513. vailable with 9 to 37 contacts. 3., 600 Vac, -55 to +. ow To Order Sample Part Number TM -31 S -4 Series Nf ontacts ontact Type Wire age (W) TM -9-15 -21-25 -31-37 lenair igh Temperature Micro P -4 Pin ontacts #24 S -6 Socket ontacts #26 T 1-18 Wire Type Wire olor Wire Length (Inches) Mounting ardware T 1 Wire Length In PTE/ White Inches Polyimide Insulated Nickel oated 7 opper 10 olor Repeat Thru-ole M ex ead ackscrew S Slot ead ackscrew P ackpost TM mounting hardware M and S ackscrews Slot head (S) ex ead (M) Integral ackpost Pin Pin Pin Socket Socket Socket Thru-ole Mounting.096/.088 ia. (2.43/2.23) 2011 lenair, Inc. U.S. E ode 06324 P -6
Well-Master Pre-Wired onnectors Micro- TM Pre-wired connector dimensions:thru-hole and jackscrew versions Pin (plug) connector socket (receptacle) connector PIN 1.094 (2.39) SKT 1.094 (2.39) E LENT +1.00/-0.00 (+2.5/-0.0) LENT +1.00/-0.00 (+2.5/-0.0) Max. Max. E Max. Max. Max. Layout In. ± 0.08 In. In. In. ± 0.08 In. In. 9P.785 19.94.565 14.35.290 7.37.181 4.60.131 3.33.199 5.05.405 10.29.390 9.91 9S.785 19.94.565 14.35.371 9.42.181 4.60 5.46.191 4.85.405 10.29.377 9.58 15P.935 23.75.715 18.16.440 11.18.331 8.41.131 3.33.199 5.05.555 14.10.390 9.91 15S.935 23.75.715 18.16.521 13.23.331 8.41 5.46.191 4.85.555 14.10.377 9.58 21P 1.085 27.43.865 21.97.590 14.99.481 12.22.131 3.33.199 5.05.705 17.91.390 9.91 21S 1.085 27.43.865 21.97.671 17.04.481 12.22 5.46.191 4.85.705 17.91.377 9.58 25P 1.185 30.01.965 24.51.690 17.53.581 14.76.131 3.33.199 5.05.805 20.45.390 9.91 25S 1.185 30.01.965 24.51.771 19.58.581 14.76 5.46.191 4.85.805 20.45.377 9.58 31P 1.335 33.91 1.115 28.32.840 21.34.731 18.57.131 3.33.199 5.05.955 24.26.390 9.91 31S 1.335 33.91 1.115 28.32.921 23.39.731 18.57 5.46.191 4.85.955 24.26.377 9.58 37P 1.485 37.72 1.265 32.13.990 25.15.881 22.38.131 3.33.199 5.05 1.105 28.07.390 9.91 37S 1.485 37.72 1.265 32.13 1.071 27.20.881 22.38 5.46.191 4.85 1.105 28.07.377 9.58-7
Micro- Well-Master Pre-Wired onnectors TM Pre-wired connector dimensions:integral jackpost version Pin (plug) connector socket (receptacle) connector 2X.086-56 UN.190 (4.83) MIN EEP 2X.086-56 UN.180 (4.57) MIN EEP E PIN 1 SKT 1.094 (2.39).190/.185 (4.83/4.70) LENT +1.00/-0.00 (+2.5/-0.0) LENT +1.00/-0.00 (+2.5/-0.0) Max. Max. E Max. Max. Max. Layout In. ± 0.08 In. In. In. ± 0.08 In. In. In. 9P.785 19.94.565 14.35.290 7.37.181 4.60.131 3.33.199 5.05.405 10.29.390 9.91.420 10.67 9S.785 19.94.565 14.35.301 7.65.181 4.60 5.46.274 6.96.405 10.29.377 9.58 N/ N/ 15P.935 23.75.715 18.16.440 11.18.331 8.41.131 3.33.199 5.05.555 14.10.390 9.91.570 14.48 15S.935 23.75.715 18.16.451 11.46.331 8.41 5.46.274 6.96.555 14.10.377 9.58 N/ N/ 21P 1.085 27.43.865 21.97.590 14.99.481 12.22.131 3.33.199 5.05.705 17.91.390 9.91.720 18.29 21S 1.085 27.43.865 21.97.601 15.27.481 12.22 5.46.274 6.96.705 17.91.377 9.58 N/ N/ 25P 1.185 30.01.965 24.51.690 17.53.581 14.76.131 3.33.199 5.05.805 20.45.390 9.91.820 20.83 25S 1.185 30.01.965 24.51.701 17.81.581 14.76 5.46.274 6.96.805 20.45.377 9.58 N/ N/ 31P 1.335 33.91 1.115 28.32.840 21.34.731 18.57.131 3.33.199 5.05.955 24.26.390 9.91.970 24.64 31S 1.335 33.91 1.115 28.32.851 21.62.731 18.57 5.46.274 6.96.955 24.26.377 9.58 N/ N/ 37P 1.485 37.72 1.265 32.13.990 25.15.881 22.38.131 3.33.199 5.05 1.105 28.07.390 9.91 1.120 28.45 37S 1.485 37.72 1.265 32.13 1.001 25.43.881 22.38 5.46.274 6.96 1.105 28.07.377 9.58 N/ N/ -8
Micro- Well-Master Well-Master ack-to-ack able ssemblies TM ack-to-ack able ssemblies TM Well-Master back-to-back Micro- cable assemblies withstand + continuous operating temperature. These.050" pitch Micro- connectors are terminated to #24 or #26 W insulated wire. Nickel-coated copper wire conforms to M22759/87, PTE/ polyimide insulation. ontacts are crimped to wire, factory-installed and potted with epoxy. Pin contacts are gold-plated high performance twistpin type and are recessed into insulator to prevent damage. Special nickel alloy contact material resists softening in high heat. Machined passivated stainless steel shell. lass-filled high temperature LP thermoplastic insulators. Meets performance requirements of MIL-TL-83513. vailable with 9 to 37 contacts. 3., 600 Vac, -55 to +. ow To Order Sample Part Number TM -31 Series No. of ontacts TM -9-15 -21-25 -31-37 lenair igh Temperature Micro S -6 ontact Type Wire age (W) P -4 Pin onnector oth Ends #24 S -6 Socket onnector oth Ends #26 T 7-18 Wire Type Wire olor Wire Length (Inches) Mounting ardware T 1 PTE/ White Wire Length In Inches Polyimide Insulated Nickel oated 7 opper 10 olor Repeat cs Thru-ole M ex ead ackscrew S slot head jackscrew P Pin onnector to Socket onnector ackpost TM mounting hardware M and S ackscrews Slot head (S) ex ead (M) Integral ackpost Pin Pin Pin Socket Socket Socket Thru-ole Mounting.096/.088 ia. (2.43/2.23) 2011 lenair, Inc. U.S. E ode 06324 P -9
Micro- Well-Master ack-to-ack able ssemblies TM back-to-back dimensions: thru-hole and jackscrew versions.175 L E.094 (2.39) PIN 1 SKT 1.094 (2.39).175 Max. Max. E Max. Max. Max. Layout In. ± 0.08 In. In. In. ± 0.08 In. In. 9P.785 19.94.565 14.35.290 7.37.181 4.60.131 3.33.199 5.05.405 10.29.390 9.91 9S.785 19.94.565 14.35.371 9.42.181 4.60 5.46.191 4.85.405 10.29.377 9.58 15P.935 23.75.715 18.16.440 11.18.331 8.41.131 3.33.199 5.05.555 14.10.390 9.91 15S.935 23.75.715 18.16.521 13.23.331 8.41 5.46.191 4.85.555 14.10.377 9.58 21P 1.085 27.43.865 21.97.590 14.99.481 12.22.131 3.33.199 5.05.705 17.91.390 9.91 21S 1.085 27.43.865 21.97.671 17.04.481 12.22 5.46.191 4.85.705 17.91.377 9.58 25P 1.185 30.01.965 24.51.690 17.53.581 14.76.131 3.33.199 5.05.805 20.45.390 9.91 25S 1.185 30.01.965 24.51.771 19.58.581 14.76 5.46.191 4.85.805 20.45.377 9.58 31P 1.335 33.91 1.115 28.32.840 21.34.731 18.57.131 3.33.199 5.05.955 24.26.390 9.91 31S 1.335 33.91 1.115 28.32.921 23.39.731 18.57 5.46.191 4.85.955 24.26.377 9.58 37P 1.485 37.72 1.265 32.13.990 25.15.881 22.38.131 3.33.199 5.05 1.105 28.07.390 9.91 37S 1.485 37.72 1.265 32.13 1.071 27.20.881 22.38 5.46.191 4.85 1.105 28.07.377 9.58-10
Well-Master ack-to-ack able ssemblies Micro- TM back-to-back dimensions: integral jackpost versions 2X.086-56 UN.190 (4.83) MIN EEP.190/.185 (4.83/4.70).094 (2.39) 2X.086-56 UN.180 (4.57) MIN EEP PIN 1 SKT 1 E.175 Max. Max. E Max. Max. Max. Layout In. ± 0.08 In. In. In. ± 0.08 In. In. In. 9P.785 19.94.565 14.35.290 7.37.181 4.60.131 3.33.199 5.05.405 10.29.390 9.91.420 10.67 9S.785 19.94.565 14.35.301 7.65.181 4.60 5.46.274 6.96.405 10.29.377 9.58 N/ N/ 15P.935 23.75.715 18.16.440 11.18.331 8.41.131 3.33.199 5.05.555 14.10.390 9.91.570 14.48 15S.935 23.75.715 18.16.451 11.46.331 8.41 5.46.274 6.96.555 14.10.377 9.58 N/ N/ 21P 1.085 27.43.865 21.97.590 14.99.481 12.22.131 3.33.199 5.05.705 17.91.390 9.91.720 18.29 21S 1.085 27.43.865 21.97.601 15.27.481 12.22 5.46.274 6.96.705 17.91.377 9.58 N/ N/ 25P 1.185 30.01.965 24.51.690 17.53.581 14.76.131 3.33.199 5.05.805 20.45.390 9.91.820 20.83 25S 1.185 30.01.965 24.51.701 17.81.581 14.76 5.46.274 6.96.805 20.45.377 9.58 N/ N/ 31P 1.335 33.91 1.115 28.32.840 21.34.731 18.57.131 3.33.199 5.05.955 24.26.390 9.91.970 24.64 31S 1.335 33.91 1.115 28.32.851 21.62.731 18.57 5.46.274 6.96.955 24.26.377 9.58 N/ N/ 37P 1.485 37.72 1.265 32.13.990 25.15.881 22.38.131 3.33.199 5.05 1.105 28.07.390 9.91 1.120 28.45 37S 1.485 37.72 1.265 32.13 1.001 25.43.881 22.38 5.46.274 6.96 1.105 28.07.377 9.58 N/ N/ -11
Micro- Well-Master Right ngle Printed ircuit oard eaders TM Right ngle Printed ircuit oard eaders TM Well-Master right angle P Micro- connectors withstand + continuous operating temperature. These.050" pitch Micro- connectors have.020 inch diameter (0.51mm)gold-plated P terminals. Terminal spacing is.100 inch by.075 inch (2.54 by 1.91mm).onnectors are potted with special high temperature epoxy. Pin contacts are gold-plated high performance twistpin type and are recessed into insulator to prevent damage. Special nickel alloy contact material resists softening in high heat. Machined passivated stainless steel shell. lass-filled high temperature LP thermoplastic insulators and organizer withstand soldering heat. Meets performance requirements of MIL- TL-83513. vailable with 9 to 37 contacts. 3., 600 Vac, -55 to +. Pin (plug) connector socket (receptacle) connector TM Right ngle P onnector Ordering Information Layout.080 Inch (2.03mm) P Terminal Length.125 Inch (3.18 mm) P Terminal Length.150 Inch (3.81 mm) P Terminal Length.172 Inch (4.37 mm) P Terminal Length.190 Inch (4.83 mm) P Terminal Length..205 Inch (2.03mm) P Terminal Length 9P TM-9PRP-.080 TM-9PRP-.110 TM-9PRP-.150 TM-9PRP-.172 TM-9PRP-.190 TM-9PRP-.205 9S TM-9SRP-.080 TM-9SRP-.110 TM-9SRP-.150 TM-9SRP-.172 TM-9SRP-.190 TM-9SRP-.205 15P TM-15PRP-.080 TM-15PRP-.110 TM-15PRP-.150 TM-15PRP-.172 TM-15PRP-.190 TM-15PRP-.205 15S TM-15SRP-.080 TM-15SRP-.110 TM-15SRP-.150 TM-15SRP-.172 TM-15SRP-.190 TM-15SRP-.205 21P TM-21PRP-.080 TM-21PRP-.110 TM-21PRP-.150 TM-21PRP-.172 TM-21PRP-.190 TM-21PRP-.205 21S TM-21SRP-.080 TM-21SRP-.110 TM-21SRP-.150 TM-21PRP-.172 TM-21SRP-.190 TM-21SRP-.205 25P TM-25PRP-.080 TM-25PRP-.110 TM-25PRP-.150 TM-25PRP-.172 TM-25PRP-.190 TM-25PRP-.205 25S TM-25SRP-.080 TM-25SRP-.110 TM-25SRP-.150 TM-25SRP-.172 TM-25SRP-.190 TM-25SRP-.205 31P TM-31PRP-.080 TM-31PRP-.110 TM-31PRP-.150 TM-31PRP-.172 TM-31PRP-.190 TM-31PRP-.205 31S TM-31SRP-.080 TM-31SRP-.110 TM-31SRP-.150 TM-31SRP-.172 TM-31SRP-.190 TM-31SRP-.205 37P TM-37PRP-.080 TM-37PRP-.110 TM-37PRP-.150 TM-37PRP-.172 TM-37PRP-.190 TM-37PRP-.205 37S TM-37SRP-.080 TM-37SRP-.110 TM-37SRP-.150 TM-37SRP-.172 TM-37SRP-.190 TM-37SRP-.205-12
Well-Master Right ngle Printed ircuit oard eaders Micro- TM Right angle P dimensions: Pin (Plug) connector 2X.086-56 UN TRU-OLE.190/.185 (4.83/4.70) 2X.086-56 UN.190 (4.83) MIN EEP 4X.020 (0.51) TERMINL LENT ± E.115 (2.92) PIN 1.334 (8.48).020 (0.51) ±.002 (0.05).444 (11.28).334 (8.48) 4Xø Max. Max. E Max. Max. Max. Layout In. ± 0.08 In. In. In. In. In. In. 9P.785 19.94.565 14.35.290 7.37.181 4.60.131 3.33.648 16.46.390 9.91.420 10.67 9S.785 19.94.565 14.35.301 7.65.181 4.60.142 3.61.629 15.98.377 9.58 N/ N/ 15P.935 23.75.715 18.16.440 11.18.331 8.41.131 3.33.648 16.46.390 9.91.570 14.48 15S.935 23.75.715 18.16.451 11.46.331 8.41.142 3.61.629 15.98.377 9.58 N/ N/ 21P 1.085 27.43.865 21.97.590 14.99.481 12.22.131 3.33.648 16.46.390 9.91.720 18.29 21S 1.085 27.43.865 21.97.601 15.27.481 12.22.142 3.61.629 15.98.377 9.58 N/ N/ 25P 1.185 30.01.965 24.51.690 17.53.581 14.76.131 3.33.648 16.46.390 9.91.820 20.83 25S 1.185 30.01.965 24.51.701 17.81.581 14.76.142 3.61.629 15.98.377 9.58 N/ N/ 31P 1.335 33.91 1.115 28.32.840 21.34.731 18.57.131 3.33.648 16.46.390 9.91.970 24.64 31S 1.335 33.91 1.115 28.32.851 21.62.731 18.57.142 3.61.629 15.98.377 9.58 N/ N/ 37P 1.485 37.72 1.265 32.13.990 25.15.881 22.38.131 3.33.648 16.46.390 9.91 1.120 28.45 37S 1.485 37.72 1.265 32.13 1.001 25.43.881 22.38.142 3.61.629 15.98.377 9.58 N/ N/ -13
Micro- Well-Master Right ngle Printed ircuit oard eaders TM Right angle P dimensions: socket (receptacle) connector 2X.086-56 UN.180 (4.57) MIN EEP 4X.020 (0.51) TERMINL LENT ±.115 (2.92) SKT 1.324 (8.23).020 (0.51) ±.002 (0.05).444 (11.28) 2X.086-56 UN TRU-OLE 4Xø.324 (8.23) Max. Max. E Max. Max. Max. Layout In. ± 0.08 In. In. In. In. In. In. 9P.785 19.94.565 14.35.290 7.37.181 4.60.131 3.33.648 16.46.390 9.91.420 10.67 9S.785 19.94.565 14.35.301 7.65.181 4.60.142 3.61.629 15.98.377 9.58 N/ N/ 15P.935 23.75.715 18.16.440 11.18.331 8.41.131 3.33.648 16.46.390 9.91.570 14.48 15S.935 23.75.715 18.16.451 11.46.331 8.41.142 3.61.629 15.98.377 9.58 N/ N/ 21P 1.085 27.43.865 21.97.590 14.99.481 12.22.131 3.33.648 16.46.390 9.91.720 18.29 21S 1.085 27.43.865 21.97.601 15.27.481 12.22.142 3.61.629 15.98.377 9.58 N/ N/ 25P 1.185 30.01.965 24.51.690 17.53.581 14.76.131 3.33.648 16.46.390 9.91.820 20.83 25S 1.185 30.01.965 24.51.701 17.81.581 14.76.142 3.61.629 15.98.377 9.58 N/ N/ 31P 1.335 33.91 1.115 28.32.840 21.34.731 18.57.131 3.33.648 16.46.390 9.91.970 24.64 31S 1.335 33.91 1.115 28.32.851 21.62.731 18.57.142 3.61.629 15.98.377 9.58 N/ N/ 37P 1.485 37.72 1.265 32.13.990 25.15.881 22.38.131 3.33.648 16.46.390 9.91 1.120 28.45 37S 1.485 37.72 1.265 32.13 1.001 25.43.881 22.38.142 3.61.629 15.98.377 9.58 N/ N/ -14
Well-Master Right ngle Printed ircuit oard eaders Micro- TM Right angle P board layouts: Pin (Plug) connector Patterns shown are for component mounting side of P. Terminals are.022 (0.56) max. diameter, mounting holes are.093 (2.36) diameter. Segmented lines represent connector body envelope and integral standoff locations..100 (2.54).100 (2.54) 1 3 5 2 4 7 9 6 8.565 (14.35) 2 4 6 8 1 3 5 7 9 11 13 15 10 12 14.715 (18.16) 9 pin 15 pin.100 (2.54).250 (6.35).100 (2.54).300 (7.62) 1 3 5 7 9 11 2 4 6 8 10 13 15 17 19 21 12 14 16 18 20.865 (21.97) 1 3 5 7 9 11 13 2 4 6 8 10 12 15 17 19 21 23 25 14 16 18 20 22 24.965 (24.51) 21 pin 25 pin.100 (2.54).375 (9.53).450 (11.43).100 (2.54) 2 4 6 8 10 12 14 16 1 3 5 7 9 11 13 15 17 19 21 23 25 27 29 31 18 20 22 24 26 28 30 1 3 5 7 9 11 13 15 17 19 2 4 6 8 10 12 14 16 18 21 23 25 27 29 31 33 35 37 20 22 24 26 28 30 32 34 36 1.115 (28.32) 1.265 (32.13) 31 pin 37 pin -15
Micro- Well-Master Right ngle Printed ircuit oard eaders TM Right angle P board layouts: socket (receptacle) connector Patterns shown are for component mounting side of P. Terminals are.022 (0.56) max. diameter, mounting holes are.093 (2.36) diameter. Segmented lines represent connector body envelope and integral standoff locations..100 (2.54).100 (2.54) 5 3 1 4 2 8 6 9 7.565 (14.35) 7 5 3 1 8 6 4 2 15 13 11 9 14 12 10.715 (18.16) 9 socket 15 socket.100 (2.54).250 (6.35).100 (2.54).300 (7.62) 11 9 7 5 3 1 10 8 6 4 2 20 18 16 14 12 21 19 17 15 13.865 (21.97) 13 11 9 7 5 3 1 12 10 8 6 4 2 24 22 20 18 16 14 25 23 21 19 17 15.965 (24.51) 21 socket 25 socket.100 (2.54).375 (9.53).450 (11.43).100 (2.54) 15 13 11 9 7 5 3 1 16 14 12 10 8 6 4 2 31 29 27 25 23 21 19 17 30 28 26 24 22 20 18 19 17 15 13 11 9 7 5 3 1 18 16 14 12 10 8 6 4 2 36 34 32 30 28 26 24 22 20 37 35 33 31 29 27 25 23 21 1.115 (28.32) 1.265 (32.13) 31 socket 37 socket -16