LONG GLIDER MANUAL ELECTRIC LONGBOARD RDD SKATE95 SERIES 1

LONG GLIDER MANUAL ELECTRIC LONGBOARD RDD SKATE95 SERIES 1

PRODUCT SPECIFICATIONS PRODUCT NAME: LONG GLIDER PRODUCT CODE: RDD SKATE95 EANCODE 8719638070126 SPECIFICATION Max speed: 12km/h Speed levels: 9 Dimensions: 91 x 22,5 x 11,5 cm Material: 5 layers maple Range: 12-15km Max weight limit: 120kg Max climbing angle: 15 Tire size: 2,5 inch Charger: Input - AC 100-240V, 2A Output DC 29.4V, 1.5A Charging time: 3 hours Battery: 4,4Ah, 25.2V Rated temerature tolerance: -10 o to 45 o PACKAGE CONTENT Long Glider Remote control AC adapter 1 Power cord 2

Congratulations! You're the proud owner of a RiDD Long Glider. The RiDD Long Glider is a cool electric longboard and allows you to get anywhere comfortable and easy. It will let you 'fly' up to a 15 km per hour speed. Connect the remote with your RiDD Long Glider to accelerate and decelerate. The polyurethane wheels provide a smooth ride. The RiDD Long Glider will let you experience a new fun way of cruising, so enjoy your RiDD & Ride! From now on you're part of the RiDD community, don't forget to share your experience with your RiDD with friends, family and on social media! 3

WARNING & LEGAL INFORMATION We assume that you will handle your longboard in a responsible and safe manner. The use of the RiDD Long Glider is not entirely without risk, certainly if you do not use your skateboard responsibly. This electric device is not a vehicle authorized for operation on public roads or streets. You need to learn how to use the Long Glider just like you learned how to ride a bicycle. The use of the RiDD Long Glider is entirely at your own risk. Loss of control, collision and falling can pose a risk of death or serious injury during use. To minimize the risk of injury, you must read and follow all instructions, warnings and safety precautions carefully in this user manual, so that you will be able to use the Long Glider safely. The legal representative - of RiDD cannot be held responsible for any physical injury and wounds to you or others. You should therefore protect yourself well by wearing high-quality protective clothing while using the product, such as a safety helmet, knee and elbow pads, gloves and sturdy shoes. The protection will absorb a large part of the impact should you fall. LEGAL INFORMATION Always follow the applicable laws and regulations. Law in many countries regulates driving a skateboard on public streets and pavements. Amongst other requirements, these laws and regulations usually dictate the minimum driver age and speed limits, as well. They may also require wearing protective clothing. Some countries prohibit driving the device on public streets and pavements. Please contact your competent authorities and familiarize yourself with the applicable laws and regulations. The legal representative of RiDD assumes no liability and provides no warranty for damage resulting from improper installation/mounting, improper use of the product or from failure to observe the operating instructions and/or safety notes. 4

REMOTE CONTROL + PAIRING REMOTE CONTROL DIAGRAM 1. On/off switch 2. Mini USB charging port 3. Accelarate/decelarate stick 4. Speed button (fast/slow) 5. Display A. Speed in miles per hour B. Capacity C. Bluetooth connecting BLUETOOTH PAIRING 1. Turn on Remote, the icon starts on screen. 2. Long press both + and - button at the same time until the Bluetooth icon is flashing. 3. Turn on the E-skateboard, appear the Icon, connected successfully. CHARGING Simply use a 5V1A standard Micro-USB cable to charge your remote from standard USB outlet. 5

INSTRUCTION The remote control has a built-in rechargeable battery, do not operate the RiDD Long Glider when the battery is low. You ll risk to lose connection with your RiDD Long Glider and it may cause dangerous situations. Operation Turn on the remote with the on/off switch, the screen will light up. There are 2 ways to use the RiDD Long Glider: With the Accelarate/decelarate stick: Push the stick gently forward and hold on maintain the speed. Releasing the stick will slow down the RiDD Long Glider. Pull back the stick to brake. With the speed buttons: Control the 9 speed levels with the speed button. Press the + button to change to a higher speed level. Press the - button, it will reduce to a slower level. Keep in mind: this way of controlling the speed will automatically maintain the speed level (cruisecontrol). Fast Forward Back 6 Slow

CHARGING THE RiDD LONG GLIDER For first time use, please charge your RiDD Long Glider for approximately 2 hours as your skateboard has been manufactured with some residual power stored. a) Make sure that the the charger and the DC power socket on the skateboard are kept dry and clean. b) Only use the supplied AC adapter on the RiDD Long Glider. Use of inappropriated AC adapter may cause damage of unit or may even cause fire, also will void the warranty. c) The LED indicator on AC adapter turns into RED, indicating that your RiDD Long Glider is being charged. d) The RED indicator will change to GREEN, and your RiDD Long Glider is fully charged. Normal charging time from empty to fully charged will take approximately 2,5 hours. DO NOT LEAVE THE RiDD Long Glider UNATTENDED OR OVERCHARGE THE BATTERY FOR MORE THAN 2,5 HOURS. WARNING Always keep the protective cap plugged onto the DC connector! Only take off the cap when charging the RiDD Long Glider. 7

STORAGE a. Store your skateboard indoors, in dry conditions at a suitable temperature b. If the ambient temperature of the storage location is below 0 C/ 32 F or above 55 C/ 131 F, please select an alternative storage location. c. To prevent dust and particles entering your skateboard during storage, please seal it inside its original packaging and add additional layers of protection where desired. d. If storing your skateboard for extended periods of time, please note that the charge level of the skateboard maybe depleted during the storage. We recommend re-charging your stored skateboard every 3 months to make sure it is ready to ride when it is brought out of storage. WARNING The environment When this product reaches the end of its life, hand it at a collection point for the recy cling of electric and electronic equipment. Please refer to the symbols on the products, the user instructions or the packaging. Check with your municipality for the address of the appropriate collection point in your neighborhood. 8

SAFETY PRECAUTIONS WARNING FAILURE TO COMPLY WITH SAFETY INSTRUCTIONS/ INAPPROPRIATE USE OF UNIT MAY LEAD TO PROPERTY DAMAGE, BODILY HARM AND IN EXTREME CIRCUMSTANCES, DEATH. Only charge your skateboard using the provided charger and cable. Failure to do so may result in product failure and will void your manufacturer warranty. Please wear appropriate safety and protective gear to prevent personal injury. Please wear safety and protective gear to the standard of protection you desire. This may include gloves, eye protection, wrist guards, helmet and knee pads. Make sure to wear comfortable clothes and flat, closed shoes when operating your skateboard. Do not wear loose clothing that could be caught by the wheels and nearby objects. Please carefully read this manual, which will assist in explaining the basic working principles and tips for using the skateboard. Do not use the skateboard if you exceed the 120kg maximum weight. - Before stepping on to the skateboard, make sure it is places on a smooth and flat surface, that the skateboard is turned on and that no safety alerts or display panel alerts are present. Do not step on the skateboard if any alerts are unresolved. - Do not attempt to open or modify your skateboard as doing so will void your manufacturer warranty and may cause the skateboard to fail leading to serious bodily harm or death. - Do not use your skateboard to place yourself or your property in danger. Do not use your skateboard to place anyone else or their property in danger. - Do not operate your skateboard while under the influence of drugs and/or alcohol. - Do not operate your skateboard when you are restless or sleepy. 9

SAFETY PRECAUTIONS Seek the appropriate advice and always use your best judgement to keep yourself out of dangerous situation with your skateboard. Do not ride your skateboard off curbs, ramps or attempt to perform stunts or tricks with your skateboard, similar to those performed on rollerblades and scooters. Do not turn sharply on your skateboard, especially at high speed. Do not continuously spin in place for prolonged periods of time. This may cause dizziness and you may fall and injure yourself or other people and Do not ride your skateboard in an abusive or extreme manner, doing so can cause damage to your skateboard and may lead to injury and death. Never ride your skateboard down stairs or escalators. Do not drive in or near puddles of water or other liquids, mud, sand, stones, gravel, debris or near rough and rugged terrain. Do not ride in inclement weather: snow, rain, hail, sleek or on icy roads or in extreme heat. - Do not ride your skateboard on slippery surfaces or steep slopes. - If you are unsure if you can safely ride on a specific terrain, step off and carry your skateboard. ALWAYS EXERCISE CAUTION. - PAY ATTENTION Always look at where you are riding and be aware of the riding conditions in front of you including: people, places, property and objects around you. - Do not operate the skateboard in crowded areas. - Operate your skateboard with extreme consideration for people and property at all times. - Do not operate your skateboard while talking, texting, looking at your phone or when otherwise distracted. - Do not ride your skateboard on public roads, footpath or cycle path. - Do not ride your skateboard near motor vehicles. - Do not climb or descend steep hills with your skateboard. 10

SAFETY PRECAUTIONS The skateboard is designed to be used by ONE individual at a time. Do not attempt to operate your skateboard with two or more people on-board. Do not carry anything whilst using your skateboard. Individuals with lack of balance or medical conditions which affect balance should not attempt to operate a skateboard. Do not use the skateboard if you are pregnant or attempting to become pregnant. Exercise extreme caution when allowing young children or elderly persons to use the skateboard. These persons may not have the physical capabilities necessary to safely operate the skateboard. Always take into account the necessary space required to slow and stop the skateboard. - DO NOT JUMP OFF YOUR skateboard. Do not attempt to ride your skateboard in dark or poorly lit areas. - Always ensure that you have sufficient clearance when standing on the skateboard to make it safely through doorways and other low-hanging obstructions. - Always avoid operating the skateboard in unsafe places and where unsafe and volatile materials are present e.g. near areas with flammable gas or liquids. - YOUR MUST COMPLY WITH ALL LOCAL, STATE AND FEDERAL LAWS IN YOUR RESPECTIVE REGION/ COUNTRY REGARDING THE LAWFUL OPERATION OF YOUR SKATEBOARD. - Learn to drive safely before you start to use the skateboard. - Do not use this RiDD Long Glider in skateparks and/or halfpipes. The RiDD Long Glider is not suitable for tricks and/or extreme skating. 11

GENERAL RIDD WARRANTY RiDD warrants to the original purchaser that the product purchased will be free of defects related to manufacturing, parts, materials, and workmanship under normal and accepted use. This product has 24 months limited send-in warranty after purchase date at an authorized (r)etail outlet; the battery pack of this product has 6 months warranty. In order to be considered eligible for repair or replacement under warranty, included with the repair item(s) must be a valid copy of purchase receipt from an authorized RiDD (r)etailer detailing the following information: Retailer s Name Original Date of Purchase SKU number of your RiDD product purchased Failure to supply a bill of sale with all of the required information will result in denial of warranty repair or replacement. Damage: This warranty does not cover any physical and/or electrical damage resulting from, but not limited to accident, misuse (skateparks halfpipes tricks extreme skating), abuse, malicious destruction, acts of nature. The manufacturer s limited product warranty statement is no longer valid when: Physical damages of the exterior, scratches on top or bottom of plastic housing of this product is not covered by warranty. When parts of plastic housing is damaged, cracked or pierced, this product can no longer be operated. Switch of the product and do not attempt to recharge the battery pack. Contact the service & repair centre for repair. The temporary or permanent affixing of any items supplied or not supplied by the manufacturer with any adhesive, fastener or the like. Use of batteries, power supplies or any other sources of power not specifically recommended by the manufacturer. Inadequate repair work performed by the end user or any non-authorized repair center. Any modification or opening, or attempt to open the Long Glider will void all warranty 20 12

RIDD HELPDESK AND SERVICE & REPAIR CENTRE International e-mail support: support@ridd.eu or call: For The Netherlands: (+31) 0900-333 33 22 ( 0,15 per minute) For Belgium: (+32) 078 486 817 For Germany: (+49) 032 2132 222 80 Please note: our service & repair centre will approve the warranty claimed, after receipt of the product. This judgement will be substantiated with arguments and supported by visuals. In the event the warranty term is expired or when damage is self-inflicted our service centre can also arrange a paid repair. IMPORTANT Please registrate your product via www.ridd.eu/warrantycard to receive product information, new product updates and special offers. RiDD is distributed by Pirox International B.V. / Blaak 6 / 3011 TA Rotterdam / The Netherlands 1321

22 14 EC DECLARATION OF CONFORMITY declare under our responsibility that the electrical product(s): RDD SKATE70 We, Pirox International B.V. Blaak 6, 3011 TA, Rotterdam, The Netherlands Skateboard: RiDD Long Glider Electrick Skateboard - (product description) is in conformity with the following applicable legislative acts: 2014/35/EU Low Voltage Directive (LVD) 2014/30/EU Electromagnetic Compatibility Directive (EMC) 2006/42/EC Machinery directive The following harmonized European standards were consulted to access the conformity. (title, number and date of issue of the standard) EN 60335-1: 2012+A11:2014 EN 62233:2008 EN 61000-6-3:2007+A1:2011 EN 61000-6-1:2007 EN 61000-3-2:2014 EN 61000-3-3 EN ISO 12100:2010 2017-4-3 Signature: Roy de Bruin (Date) Managing Director (Pirox International B.V.)

ALL RIGHTS RESERVED, COPYRIGHT PIROX INTERNATIONAL B.V. Electric and electronic equipment and included batteries contains materials, components and substances that can be hazardous to your health and the environment, if the waste material (discarded electric and electronic equipment and batteries) is not handled correctly. Electric and electronic equipment and batteries is marked with the crossed our trash can symbol, seen below. This symbol disposed of separately. d be As the end user it is important that you submit your used batteries to the appropriate and designated facility. In this manner you make sure that the batteries are recycled in accordance with legislature and will not harm the environment. All cities have established collection points, where electric and electronic equipment and batteries can either be submitted free of charge at recycling stations and other collection sites, or be collected from the households. Additional information about these disposal is available at your local authority Imported by: Pirox International B.V. Blaak 6 3011 TA Rotterdam The Netherlands 15