Date of issue: 05/20/2015 Version: 1.0 SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product name : 1.2. Relevant identified uses of the substance or mixture and uses advised against Use of the substance/mixture 1.3. Details of the supplier of the safety data sheet Fritz Industries, Inc. 500 N. Sam Houston Rd. Mesquite, Texas 75149 T (972) 285-5471 (800) 955-1323 1.4. Emergency telephone number : Aquarium Antifungal Emergency number : CHEMTREC: (800) 424-9300 SECTION 2: Hazards identification 2.1. Classification of the substance or mixture Classification (GHS-US) Not classified 2.2. Label elements GHS-US labeling No labeling applicable 2.3. Other hazards 2.4. Unknown acute toxicity (GHS-US) SECTION 3: Composition/information on ingredients 3.1. Substance 3.2. Mixture Full text of H-phrases: see section 16 SECTION 4: First aid measures 4.1. Description of first aid measures First-aid measures general First-aid measures after inhalation First-aid measures after skin contact First-aid measures after eye contact First-aid measures after ingestion : If you feel unwell, seek medical advice (show the label where possible). : Allow victim to breathe fresh air. Allow the victim to rest. : Remove affected clothing and wash all exposed skin area with mild soap and water, followed by warm water rinse. : Rinse immediately with plenty of water. Obtain medical attention if pain, blinking or redness persist. : Rinse mouth. Do NOT induce vomiting. Get medical advice/attention if you feel unwell. 4.2. Most important symptoms and effects, both acute and delayed Symptoms/injuries : Not expected to present a significant hazard under anticipated conditions of normal use. 4.3. Indication of any immediate medical attention and special treatment needed SECTION 5: Firefighting measures 5.1. Extinguishing media Suitable extinguishing media : Adapt extinguishing media to the environment. Unsuitable extinguishing media : No unsuitable extinguishing media known. 05/27/2015 EN (English US) Page 1
5.2. Special hazards arising from the substance or mixture 5.3. Advice for firefighters Firefighting instructions Protection during firefighting : Use water spray or fog for cooling exposed containers. Exercise caution when fighting any chemical fire. Prevent fire-fighting water from entering environment. : Do not enter fire area without proper protective equipment, including respiratory protection. SECTION 6: Accidental release measures 6.1. Personal precautions, protective equipment and emergency procedures 6.1.1. For non-emergency personnel Emergency procedures 6.1.2. For emergency responders Protective equipment Emergency procedures : Evacuate unnecessary personnel. : Use personal protective equipment as required. : Ventilate area. 6.2. Environmental precautions Prevent entry to sewers and public waters. 6.3. Methods and material for containment and cleaning up Methods for cleaning up 6.4. Reference to other sections See Heading 8. Exposure controls and personal protection. : Soak up spills with inert solids, such as clay or diatomaceous earth as soon as possible. Collect spillage. Store away from other materials. SECTION 7: Handling and storage 7.1. Precautions for safe handling Precautions for safe handling : Wash hands and other exposed areas with mild soap and water before eating, drinking or smoking and when leaving work. Provide local exhaust or general room ventilation. 7.2. Conditions for safe storage, including any incompatibilities Storage conditions : Keep cool. Keep container closed when not in use. Store in a dry place. Incompatible products : Strong oxidizing agents. Incompatible materials : None known. 7.3. Specific end use(s) SECTION 8: Exposure controls/personal protection 8.1. Control parameters ACGIH OSHA 8.2. Exposure controls Appropriate engineering controls Personal protective equipment : Ensure good ventilation of the work station. : Avoid all unnecessary exposure. Hand protection Eye protection Respiratory protection : Wear protective gloves. : Chemical goggles or safety glasses. : Respiratory protection not required in normal conditions. Where exposure through inhalation may occur from use, respiratory protection equipment is recommended. : Do not eat, drink or smoke during use. SECTION 9: Physical and chemical properties 9.1. Information on basic physical and chemical properties Physical state : Liquid Color : Dark green-blue 05/27/2015 EN (English US) 2/5
Odor Odor threshold : Odourless ph : 2.8-3.8 Relative evaporation rate (butyl acetate=1) Melting point Freezing point Boiling point Flash point Auto-ignition temperature Decomposition temperature Flammability (solid, gas) Vapor pressure Relative vapor density at 20 C Relative density Specific gravity / density : 0.94-1.04 g/ml Solubility : Water: Solubility in water of component(s) of the mixture : : 6 g/100ml Log Pow Log Kow Viscosity, kinematic Viscosity, dynamic Explosive properties Oxidizing properties Explosive limits 9.2. SECTION 10: Stability and reactivity 10.1. Reactivity 10.2. Chemical stability Stable under use and storage conditions as recommended in section 7. 10.3. Possibility of hazardous reactions 10.4. Conditions to avoid Extremely high or low temperatures. 10.5. Incompatible materials Strong oxidizing agents. 10.6. Hazardous decomposition products Under normal conditions of storage and use, hazardous decomposition products should not be produced. SECTION 11: Toxicological information 11.1. Information on toxicological effects Acute toxicity Skin corrosion/irritation Serious eye damage/irritation Respiratory or skin sensitization Germ cell mutagenicity Carcinogenicity ph: 2.8-3.8 ph: 2.8-3.8 05/27/2015 EN (English US) 3/5
Reproductive toxicity Specific target organ toxicity (single exposure) Specific target organ toxicity (repeated exposure) Aspiration hazard Potential Adverse human health effects and symptoms : Based on available data, the classification criteria are not met. SECTION 12: Ecological information 12.1. Toxicity 12.2. Persistence and degradability Persistence and degradability 12.3. Bioaccumulative potential Bioaccumulative potential 12.4. Mobility in soil 12.5. Other adverse effects Effect on ozone layer : Effect on the global warming : No known ecological damage caused by this product. : Avoid release to the environment. SECTION 13: Disposal considerations 13.1. Waste treatment methods Waste disposal recommendations : Dispose in a safe manner in accordance with local/national regulations. Ecology - waste materials : Avoid release to the environment. SECTION 14: Transport information In accordance with DOT Not regulated for transport Additional information : No supplementary information available. ADR Transport by sea Air transport SECTION 15: Regulatory information 15.1. US Federal regulations 15.2. International regulations CANADA EU-Regulations 05/27/2015 EN (English US) 4/5
Classification according to Regulation (EC) No. 1272/2008 [CLP] Classification according to Directive 67/548/EEC [DSD] or 1999/45/EC [DPD] Not classified 15.2.2. National regulations \ 15.3. US State regulations SECTION 16: : None. NFPA health hazard NFPA fire hazard NFPA reactivity : 0 - Exposure under fire conditions would offer no hazard beyond that of ordinary combustible materials. : 0 - Materials that will not burn. : 0 - Normally stable, even under fire exposure conditions, and are not reactive with water. SDS US Specialty (GHS HazCom 2012) The information contained herein is based on data considered accurate. However, no warranty is expressed or implied regarding the accuracy of these data or the result to be obtained from the use thereof. Fritz Industries, Inc. assumes no responsibility for personal injuury or property damage to vendees, users or third parties caused by the material. Such vendees or users assume all risks associated with the use of the material. 05/27/2015 EN (English US) 5/5