Pressure Calibrators Series PC..., PM...
SIKA-Precision Pressure Calibrators, Series PC..., PM... We help you, if you are under pressure! Pneumatic pressure calibrators PM 25 A, PM 25 D, PM 110 PIC pressure range of handpump: -1... 25 bar Type PM 25 A display: analogue precision pressure gauge (D=100) pressure range: -1...24 bar (all standard DIN measuring ranges) tolerance: ± 0.6 % FS Type PM 25 D -1...30 bar / 0.01 tolerance: ± 0.1 % FS ± 1 digit Type PM 1 10 PIC EXI-version: EEX ia IIC T5 Hydraulic pressure calibrator PC 400, PC 400 L, PC 400 LW -1...10 bar /0.001-1...20 bar /0.01 tolerance: ±0.10 % FS ± 1 digit or EXI-version: EEX ia IIC T5 tolerance: Type PC 400 H pressure media: special hydraulic oil pressure range / resolution: 0...99.99 bar / 0.01 Type PC 400 L pressure media: special hydraulic oil 100...400.0 bar / 0.01 pressure range / resolution: 0...9.999 bar / 0.001 Type PC 400 LW pressure media: distilled water 10...50.00 bar / 0.10 pressure range / resolution: 0...9.999 bar / 0.001 10...50.00 bar / 0.10
Hydraulic pressure calibrators PM 700 A, PM 700 D, PM 710 PIC pressure range of handpump: 0...400 bar (distilled water) 0...700 bar (spec, hydraulic oil) Type PM 700 A display: analogue precision pressure gauge (D=100) pressure ranges: 0...600 bar (all standard DIN measuring ranges) tolerance: ± 0.6 % FS Type PM 700 D pressure range / resolution: 0...300 bar / 0.1 0...700 bar / 0.2 tolerance: ± 0.1 % FS ± 1 digit Type PM 710 PIC pressure range / resolution: 0...50 bar, 0...100 bar / 0.01 0...200 bar, 0...450 bar / 0.1 0...700 bar / 0.1 tolerance: ± 0.10 % FS ± 1 digit or Hydraulic pressure calibrator PC 700 pressure medium: special hydraulic oil pressure range / resolution: 0...200 bar / 0.1 0...350 bar / 0.1 0...450 bar / 0.1 0...700 bar / 0.1 tolerance: ± 0.15 % FS ± 1 digit or ± 0.10 % FS ± 1 digit or
Precision pressure instrument PM 100 PIC pressure medium: fluids, gas and air -1...10 bar / 0.001-1...20 bar / 0.01 0...50 bar / 0.01 0...100 bar / 0.01 0...200 bar / 0.1 O...450bar/0.1 0...700 bar / 0.1 tolerance: ± 0.10 % FS ± 1 digit or included accessories: battery charger Accessories and options Accessories for pressure calibrators carrying case, flexible pressure hose (0,7 m) and seals adapter set: G 1/8" A; G 3/8" A; G 1/2" A (parallel) 1/8" NPT; 3/8" NPT; 1/4" NPT; 1/2" NPT (tapered) for PM-series battery charger for PM-PIC-series Options pressure adapter customer specified hand test pumps type P 25: type P 700: pneumatic hand pressure pump pressure range: -1...25 bar hydraulic pressure pump pressure range: 0...400 bar with distilled water pressure range: 0...700 bar with special hydraulic oil analogue reference pressure gauge for PM 25 A and PM 700 A all standard DIN measuring ranges digital reference pressure gauge for PM 25 D and PM 700 D pressure range / resolution: -1... 2 bar / 0.001-1...30 bar / 0.01 0...300 bar / 0.1 0...700 bar / 0.2
A suitable pressure calibrator for any application Pneumatic and hydraulic pressure calibrators of series PM... and PC... distinguish themselves especially by high accuracy of measurement and compact type of construction. The calibrators are used in the field or laboratory, production and service for inspection or calibration of pressure sensors, gauges, pressure switches and by-pass valves. Reference pressures of -1 up to 700 bar can be generated in a fast and simple way. Exact adjustment of the desired pressure is carried out by a precision adjustment valve. The reference pressure is indicated via an analogue precision pressure gauge or a digital LCD-Display. The instruments under test are connected to the pressure output of the calibrators by a pressure hose and an adapter. Compensation of the temperature influence in the range of -10...+15 C is carried out automatically. For rough use on the spot the calibrators can be supplied in protection class IP 65 or IP 68. Power supply is realized by batteries or rechargeable accumulators. The automatic measuring range switch of the PC- and PM- PIC series grants an optimal resolution with any application. Two different measurement units (e. g. bar, PSI, kg/cm 2...) can be selected by pressing a function key. Software Our pressure calibrators have a serial interface RS 232 for data acquisition via an external computer (PC). Customer-specific documentation of the measured values in the form of works certificates and calibration reports is very easy and simple in conjunction with our test and calibration software. The software package is designed to meet the requirements of DIN EN ISO 9000 ff and contains in detail: program for evaluation of the measuring results via external PC database, data storage and print out of works certification coded and licensed for one calibrator data cable for RS 232 included WINDOWS-version Certification The basic assumption for quality is the regular calibration/ re-calibration of measuring instruments and calibrators. The calibration/re-calibration should be done as described in the DIN EN ISO 9000 ff standard. This standard requires that measuring devices which are used for inspection or calibration agree with national standards, i. e. they are certificated. The precision pressure calibrators of series PC and PM can be supplied alternatively with DKD-certificate or SIKA-works certificate. Our internal DKD-laboratory has tested installations for pressures up to 1300 bar. Calibration of pressure sensors and pressure measuring instruments (even products) can be carried out too.