CURRICULUM VITAE Name: Harish Kumar Address Room No. 208, National Institute of Technology, Sector A-7, Narela, New Delhi 110 040, India Telephone: +91-9718456603 E-mail: harishkumar@nitdelhi.ac.in Date of Birth: October 02, 1981 Nationality: Indian EDUCATION 2010-2015 Guru Gobind Indraprastha University (GGSIPU), Delhi 110 075, India Doctor of Philosophy (Mechanical Engineering) Title of thesis Finite element computational and experimental investigations of design and metrological characterization of force transducers Supervisor Dr. Chitra Sharma, Indira Gandhi Delhi Technical University for Women, Delhi 110 006, India 1999-2003 Guru Gobind Indraprastha University (GGSIPU), Delhi 110 075, India Bachelor of Technology (Mechanical and Automation Engineering) First Division with Distinction PROFESSIONAL EXPERIENCE (14+ years) 09/2017 till date Assistant Professor, Mechanical Engineering National Institute of Technology, Delhi, India 03/2014 08/2017* Senior Scientist, Mass Metrology, *07/2016 10/2016 Guest Researcher, Fundamental Electrical Measurement, National Institute of Standards and Technology, Gaithersburg, USA 05/2012 03/2014 Scientist, Mass Metrology, 03/2010 05/2012 Scientist, Force and Hardness Metrology, CSIR - National Physical Laboratory, New Delhi, India 03/2007 03/2010 Junior Scientist, Force and Hardness Metrology, 07/2005 03/2007 Lecturer, Mechanical Engineering, Krishna Engineering College, Ghaziabad 201 007, India 02/2004 07/2005 Lecturer, Mechanical Engineering, Babu Banarasi Das Institute of Technology, Ghaziabad 201 206, India 07/2003 02/2004 Lecturer, Mechanical Engineering, Shivdan Singh Institute of Technology, Aligarh 202 001, India
PUBLICATIONS IN PEER REVIEWED JOURNALS 1. Anil Kumar, Harish Kumar*,V N Ojha, Shakti Singh, Girija Moona, Satish, P K Dubey, H K Singh, Goutam Mandal and D K Aswal (2017), National Physical Laboratory demonstrates 1 g Kibble balance: Linkage of macroscopic mass to Planck constant, Current Science, Vol. 113 (3), pp. 381-382. 2. Amit Kumar Srivastava, P K Arora, Sharad Chandra Srivastava, Harish Kumar and M K Lohumi (2017), Determination of fracture parameters for multiple cracks of laminated composite finite plate, Applied Composite Materials, Accepted. 3. Girija Moona, Rina Sharma and Harish Kumar (2017), Evaluation of uncertainty of measurement of shadow mask dot pitch using different approaches, Transactions of the Institute of Measurement and Control, Accepted. 4. Harish Kumar, Girija Moona, P K Arora, Abid Haleem, Jasveer Singh, Rajesh Kumar and Anil Kumar (2017), Monte Carlo Method for Evaluation of Uncertainty of Measurement in Brinell Hardness Scale, Indian Journal of Pure and Applied Physics, Vol. 55 (6), pp. 445-453. 5. Harish Kumar, P K Arora, Girija Moona, D P Singh, Jasveer Singh and Anil Kumar (2016), A retrospective investigation of different uncertainty of measurement estimation approaches, Lecture Notes in Mechanical Engineering, (Proceedings of the 28 th International Conference on CARs and FoF 2016), pp. 779-784. 6. P K Arora, Abid Haleem, M K Singh and Harish Kumar (2016), Optimal design of a production system, Lecture Notes in Mechanical Engineering (Proceedings of the 28 th International Conference on CARs and FoF 2016), pp. 697-703. 7. Harish Kumar, Chitra Sharma, Pawan K Arora, Girija Moona and Anil Kumar (2016), Development and metrological characterization of a precision force transducer for static force measurement related applications, Measurement, Vol. 88, pp. 77-86. 8. Amit K Srivastava, Pawan K Arora, Harish Kumar (2016), Numerical and experiment fracture modeling for multiple cracks of a finite aluminum plate, International Journal of Mechanical Sciences, Vol. 110, pp. 1-13. 9. Girija Moona, Anil Kumar and Harish Kumar (2016), Restructuring of a Plant Production Layout by using Different Array Based Clustering Techniques, International Journal of Advanced Operation Management,Vol. 8, pp. 153-167. 10. Harish Kumar, Chitra Sharma and Anil Kumar (2015), Retrospective investigation of force measurement: A review, Mapan Journal of Metrology Society of India, Vol. 30 (4), pp. 291-302. 11. Harish Kumar, Chitra Sharma, Anil Kumar, P K Arora and Sudhir Kumar (2015), Design, development and metrological characterization of a low capacity precision industrial force transducer, ISA Transactions, Vol. 58, pp. 655-666. 12. Harish Kumar, Mohit Kaushik, Pardeep, P K Arora and Abid Haleem (2015), Investigation on metrological characterization of elliptical shaped force transducer for precision force measurement, Engineering Solid Mechanics, Vol. 3 (4), pp. 263-273. 13. Harish Kumar, Pardeep, Mohit Kaushik and Anil Kumar (2015), Development and characterization of a modified ring shaped force transducer, Mapan Journal of Metrology Society of India, Vol. 30 (1), pp. 37-47. 14. Harish Kumar (2014), Uncertainty evaluation of 1 MN force calibration machine, Advanced Science, Engineering and Medicine, Vol. 6 (5), pp. 591-594. 15. Sudhir Kumar and H Kumar (2014), Development and Testing of ring shaped force transducers, Journal of Scientific and Industrial Research, Vol. 73 (2), pp. 103-106. 16. P K Arora, Abid Haleem, M K Singh, Harish Kumar and Mohit Kaushik (2014), Design of a production system using genetic algorithm, Procedia Technology, Vol. 14, pp. 390-396.
17. Rahul Singh, Amber Jain and Harish Kumar (2014), New design of ignition system of gas turbine, Applied Mechanics and Materials, Vol. 592-594, pp. 1662-1666. 18. Harish Kumar (2013), A study of the long term stability of the force transducers, NCSLI Measure the Journal of Measurement Science, Vol. 8 (4), pp. 40-44. 19. Harish Kumar (2013), A contemporary approach for evaluation of the best measurement capability of a force calibration machine, International Journal of Modern Physics Conference Series, Vol. 24. 20. Anil Kumar, Harish Kumar, Goutam Mandal, M B Das and D C Sharma (2013), Establishment of traceability of reference grade hydrometers at National Physical Laboratory, India (NPLI), International Journal of Modern Physics Conference Series, Vol. 24. 21. Harish Kumar and Anil Kumar (2013), Metrological performance evaluation of force standard machines using intercomparison as a measure at National Physical Laboratory, India, Current Science, Vol. 105 (8), pp. 1138-1145. 22. Harish Kumar, Chitra Sharma and Anil Kumar (2013), The development and metrological characterization of a square ring shaped force transducer, Measurement Science and Technology, Vol. 24 (9). 23. Harish Kumar and Chitra Sharma (2013), Comparison studies of different force measuring systems, Indian Journal of Pure and Applied Physics, Vol. 51 (6), pp. 390-396. 24. Pawan Kumar Arora, A Haleem, M K Singh and Harish Kumar (2013), Optimization of cellular manufacturing systems using genetic algorithm A review, Advanced Materials Research, Vol. 622-623, pp. 60-63. 25. Pawan Kumar Arora, A Haleem, M K Singh and Harish Kumar (2013), Proposed model for optimizing production system using CMS, Applied Mechanics and Materials, Vol. 281, pp. 673-676. 26. Harish Kumar and Chitra Sharma (2012), Role of finite element analysis in improving hysteresis error of force transducers, Transactions of Institute of Measurement and Control, Vol. 34 (8), pp. 1019-1024. 27. Rajesh Kumar, Harish Kumar, Vikram and Anil Kumar (2012), Long term uncertainty investigations of 1 MN force calibration machine at NPL, India (NPLI), Measurement Science Review, Vol. 12 (4), pp. 147-150. 28. Harish Kumar, Chitra Sharma and Anil Kumar (2012), Deflection analysis of a force transducer, Sensor Letters, Vol. 10 (3/4), pp. 723-728. 29. S K Jain, Harish Kumar, S S K Titus, F Tegtmeier, N Prenzlow and D Schwind (2012), Metrological characterization of the 1 MN force standard machine at NPL India, Measurement, Vol. 45 (3), pp. 590-596. 30. Harish Kumar and Chitra Sharma (2012), Performance evaluation of force transducers, Indian Journal of Pure and Applied Physics, Vol. 50 (2), pp. 86-90. 31. Harish Kumar, Anil Kumar and Sanjiv Gupta (2011), Design studies and testing of a torque transducer, Indian Journal of Pure and Applied Physics, Vol. 49 (10), pp. 653-656. 32. Harish Kumar, Chitra Sharma and Anil Kumar (2011), Design and development of precision force transducers, Journal of Scientific and Industrial Research, Vol. 70 (7), pp. 519-524. 33. Harish Kumar, Anil Kumar and Poonam Yadav (2011), Improved performance of 50 kn dead weight force machine using automation as a tool, Measurement Science Review, Vol. 11 (2), 67-70. 34. Anil Kumar and Harish Kumar (2011), Stability studies of torque transducers, Measurement Science Review, Vol. 11 (2), pp. 41-44. 35. Harish Kumar and Anil Kumar (2011), Investigations of measurement uncertainty and stability studies of dial gauged force proving instruments, NCSLI Measure the Journal of Measurement Science, Vol. 6 (2), pp. 64-68.
ACADEMIC CONFERENCE PRESENTATIONS 36. Harish Kumar, Satish, P K Dubey, Goutam Mandal, Anil Kumar and M A Ansari (2015), Preliminary investigations of watt balance experiment at CSIR NPL, Proceedings of the India International Science Festival, December 4-8, 2015, Delhi, India. 37. Girija Moona, Harish Kumar and P K Arora (2015), Laser based force transducer for precision force measurement, Proceedings of the India International Science Festival, December 4-8, 2015, Delhi, India. 38. Harish Kumar and Anil Kumar (2015), Comparison studies of simple shaped force transducers, Proceedings of 4 th National Conference on Advances in Metrology (Admet) 2015, February 25-27, 2015, Durgapur, India. 39. Harish Kumar, Chitra Sharma and Anil Kumar (2014), A retrospective investigation of deflection of ring shaped force transducer, Proceedings of 14 th International Conference on Research and Development in Mechanical Industry (RaDMI) 2014, September 18-21, 2014, Topola, Serbia. 40. Harish Kumar (2014), A systematic approach for investigations of a force transducer, Proceedings of International Conference on Advances in Mechanical Engineering (ICAME) 2014, Al Falah University, August 7-8, 2014, Faridabad, India. 41. Anil Kumar, Harish Kumar and Naveen Garg (2014), Monte Carlo Method in Uncertainty Evaluation, Proceedings of 3 rd National Conference on Advances in Metrology (Admet) 2014, pp. 57-58, February 18-21, 2014, Patiala, India. 42. N Garg, T K Saxena, H Kumar and A Kumar (2014), Uncertainty evaluation in reciprocity measurements using monte carlo simulation approach, Proceedings of 3 rd National Conference on Advances in Metrology (Admet) 2014, pp. 232-233, February 18-21, 2014, Patiala, India. 43. Pardeep, Harish Kumar, Mohit Kaushik and Anil Kumar (2013), Preliminary investigations of hexagonal ring shaped force transducer, Proceeding of the 4 th Nirma University International Conference on Engineering (Nuicone) 2013, India. 44. Naveen Garg, Harish Kumar, Anil Kumar and Sagar Maji (2013), Application of laser interferometry in providing traceable vibration measurement, Proceedings of the International Conference on Smart Technologies in Mechanical Engineering 2013 (STME 2013), October 25-26, Delhi, India. 45. Anil Kumar, Naveen Garg and Harish Kumar (2013), A comparative study of statistical methods used in analyzing the key comparison data, Proceedings of 8 th International Conference on Advances in Metrology (Admet 2013), February 21-13, 2013, New Delhi, India. 46. Anil Kumar, Harish Kumar, Goutam Mandal and D C Sharma (2013), A novel method for volumetric calibration, Proceedings of 8 th International Conference on Advances in Metrology (Admet 2013), February 21-13, 2013, New Delhi, India. 47. Harish Kumar and Chitra Sharma (2013), Development and metrological characterization of force transducers: a review, Proceedings of National Conference on Advances in Mechanical Engineering (NCAME) 2013, Al Falah University, Faridabad, India. 48. Harish Kumar and Anil Kumar (2012), Influence of excitation voltage over metrological performance of force transducers, Proceedings of XXI MEKO World Congress, September 10-13, 2012, Busan, South Korea. 49. S S K Titus, Harish Kumar, Rajesh Kumar and S K Jain (2012), An intercomparison study between two dead weight force machines established at NPL in the 1 50 kn range, Proceedings of 2 nd National Conference on Advances in Metrology (Admet 2012), pp. 1-5 (CD ROM), February 6-8, 2012, Pune, India.
50. Kirti Bala, Harish Kumar and Pawan Kumar Arora (2011), Comparative studies of different cell formation techniques, Proceedings of All India Seminar on Design and Analysis of Mechanical Systems using Optimization Techniques, pp. 15-18, October 14-15, 2011, Indore, India. 51. Sudhir Kumar, Madhuban Prasad, Harish Kumar and Pawan Kumar Arora (2011), Modeling and static stress analysis of a rail berth, Proceedings of All India Seminar on Design and Analysis of Mechanical Systems using Optimization Techniques, pp. 50-52, October 14-15, 2011, Indore, India 52. S K Jain, Harish Kumar and S S K Titus (2011), Performance evaluation of new1 MN force standard machine at NPL (I), Proceedings of 1 st National Conference on Advances in Metrology (Admet) -2011, pp. 1-4 (CD ROM), February 16-18, 2011, Bangalore, India. 53. Sudhir Kumar, Dhananjay Pradhan, Pawan Kumar Arora and Harish Kumar (2011), Environmental effects on fatigue behaviour of mild steel: An experimental study, Proceedings of 11 th International Conference on Research and Development in Mechanical Industry (RADMI 2011), pp. 242-245, September 15-18, 2011, Sokobanja, Serbia. 54. Anil Kumar, Harish Kumar, Poonam Yadav and Mohit Kaushik (2011), Experimental investigations of different digital indicators over metrological characterization of force transducers, Proceedings of Asia Pacific Symposium on Measurement of Mass, Force and Torque (APMF 2011), pp. 95-99, September 19-22, 2011, Xi an, China. 55. Harish Kumar and Anil Kumar (2011), Stability studies of force proving instruments, Proceedings of Asia Pacific Symposium on Measurement of Mass, Force and Torque (APMF 2011), pp. 123-127, September 19-22, 2011, Xi an, China. 56. Harish Kumar, Chitra Sharma, Anil Kumar and Poonam Yadav (2010), Design, development and testing of a force transducer, Proceedings of International Conference on Young Scientists Engineering Mechanics and Transport (EMT 2010), pp. 16-17, November 24-25, 2010, Lviv, Ukraine. 57. Harish Kumar, Chitra Sharma and Sanjiv Gupta (2010), Deflection studies of a force transducer, Proceedings of 10 th International Conference on Research and Development in Mechanical Industry (RADMI 2010), pp. 300-303, September 16-19, 2010, Donji Milanovac, Serbia. 58. Harish Kumar and S K Jain (2009), Evaluation of axial sensitivity of circular ring shaped force proving ring using finite element method (FEM), Proceedings of 7 th International Conference on Advances in Metrology (Admet 2009), pp. 118-119, February 18-19, 2009, New Delhi, India. 59. K K Jain, S S K Titus, Harish Kumar and H N P Poddar (2008), An automated dead weight system for realizing force in 1 N 10 N range, Proceedings of NCSL International Symposium on Metrology s Impact on Business, pp. 1-6 (CD ROM), August 3-7, 2008, Orlando, USA. 60. K K Jain, S S K Titus and Harish Kumar (2007), Traceability of micro newton forces through dead weight force machine, Proceedings of National Symposium on Metrology and Quality Management, pp. 35-39, July 11-13, New Delhi, India. (Hindi) 61. Harish Kumar, Harsh Kohli, Sanjiv Gupta and Abhishek Pandey (2006), Design of automated handling system, Proceedings of 22 nd International Conference on CAD / CAM, Robotics and Factories of Future (CARsFOF 2006), pp. 956-964, July 19-22, 2006, Vellore, India.