MATERIAL SAFETY DATA SHEET

Similar documents
MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET U.S. DEPARTMENT OF LABOR Occupational Safety and Health Administration (Prepared According to 29 CFR 1910.

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

Chemical Name: Germ-Bac. Manufacturer: Brady. Container size: 15.5 OZ. Location: VLA. Disposal: Place empty container in trash.

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

Material Safety Data Sheet

Product Name: Phone: Items: Formula Code:

SAFETY DATA SHEET. 1. Product and Company Identification

RAID ANT KILLER LIQUID (REG NO P.C.P. ACT)

Section I - Product and Company Identification. Section II - Hazardous Information

Version 5.0 Print Date 02/12/2013 REVISION DATE: 02/11/2013

MATERIAL SAFETY DATA SHEET

EARTH OPTIONS BY RAID HOUSE & GARDEN INSECT KILLER

FIRST AID - SKIN CONTACT: IF ON SKIN: Gently wash with plenty of Soap and Water. If skin irritation occurs: Get medical advice/ attention.

Product Name: Items: Formula Code: SDS Revision Date:

MATERIAL SAFETY DATA SHEET

: ACCELGUARD GAL DRUM

DURAL 435 PART A Version 3.0 Print Date 01/27/2015 REVISION DATE: 07/08/2012

Material Safety Data Sheet OMNI POOL SURFACE CLEANER

(800) Miller-Stephenson Chemical 55 Backus Ave. Danbury, Conn USA (203)

Substance key: BBG7080 REVISION DATE: 00/00/0000 Version Print Date: 11/29/2005. Somerville, NJ Telephone No.:

SAFETY DATA SHEET. Section 1. IDENTIFICATION

MATERIAL SAFETY DATA SHEET

: EUCON WR 91 - BULK GALLONS

1. Product And Company Identification

Issue Date: 13-Dec-2012 Revision Date: 10-APR-2015 Version 2 1. IDENTIFICATION. United 432 PHASER GLASS BLAST. Concentrated glass cleaner.

: VULKEM 202 Part B. Material Safety Data Sheet SECTION 1 - PRODUCT IDENTIFICATION SECTION 2 - HAZARDS IDENTIFICATION SECTION 3 - PRODUCT COMPOSITION

MATERIAL SAFETY DATA SHEET

GLENIUM 3000 (FORMERLY: RHEOBUILD 3000FC; PS1140 ADMIXTURE)

EUCON CIA - BULK GALLONS Version 2. Print Date 09/13/2008 REVISION DATE: 09/12/2008

: KUREZ W VOX - 55 GAL DRUM

Issue Date: 16-Feb-2012 Revision Date: 24-Feb-2015 Version 2 1. IDENTIFICATION. United 894 ZYME-OUT. For industrial and institutional use only.

Issue Date: 09-Jan-2013 Revision Date: 06-Feb-2017 Version Number: Identification. 2. Hazards Identification

SAFETY DATA SHEET (800) (800) Category 2 Category 2A

Material Safety Data Sheet

24 hr. Emergency Contact (CHEMTREC) US Tel: Int l. Tel CHEMICAL PRODUCT AND COMPANY IDENTIFICATION

MATERIAL SAFETY DATA SHEET

Date Printed: 2/17/2019 Product: M UPHOLSTERY/FABRIC CLEANER. Surface Preparation or Protection

SAFETY DATA SHEET SSS FOAMCLEAN ASCEND 62 INSTANT HAND SANITIZER. GHS SDS F688F Page 1 of 6 SECTION 1 PRODUCT AND COMPANY IDENTIFICATION

Material Safety Data Sheet

MATERIAL SAFETY DATA SHEET

Safety Data Sheet 1818BR

SAFETY DATA SHEET. Section 1. IDENTIFICATION

MSDS REPORT - CHEMICAL PRODUCT AND COMPANY IDENTIFICATION SAN FERNANDO MISSION BVD MISSION HILLS, CA 91345

MATERIAL SAFETY DATA SHEET

SAFETY DATA SHEET (800) (800) Category 2 Category 2A

Version /28/2006

AST PENETRANT II SAFETY DATA SHEET Section 1- Product and Company Identification

SAFETY DATA SHEET Confirms to OSHA Hazard Communication Standard (CFR ) HazCom 2012

SAFETY DATA SHEET. Section 1. IDENTIFICATION

Date Printed: 1/5/2016 Product: B Surface Preparation or Protection. (703) (Collect calls are accepted)

Material Safety Data Sheet

Transcription:

MATERIAL SAFETY DATA SHEET 1 Product and Company Identification Product number 301-004 Product name Effective date Fast Kill Residual Roach & Ant Killer 21-Apr-2011 Company information Claire Manufacturing Co 1005 S Westgate Drive Addison, IL 60101 United States Company phone General Assistance 630-543-7600 Emergency telephone US 800-424-9300 Emergency telephone outside US 703-527-3887 Version # 10 Supersedes date 22-Feb-2011 Emergency overview Potential health effects Routes of exposure Eyes Skin Inhalation Ingestion Target organs Chronic effects Signs and symptoms 2 Hazards Identification FLAMMABLE Aerosol Will be easily ignited by heat, spark or flames CONTENTS UNDER PRESSURE Irritating to eyes Prolonged exposure may cause chronic effects Inhalation Eye contact Skin contact Ingestion Causes eye irritation Frequent or prolonged contact may defat and dry the skin, leading to discomfort and dermatitis Harmful if absorbed through the skin Intentional misuse by concentrating and inhaling the product can be harmful or fatal Exposure by ingestion of an aerosol is unlikely Components of the product may be absorbed into the body by ingestion Central nervous system May cause central nervous system disorder (eg, narcosis involving a loss of coordination, weakness, fatigue, mental confusion and blurred vision) and/or damage Frequent or prolonged contact may defat and dry the skin, leading to discomfort and dermatitis Narcosis Defatting of the skin Skin irritation 3 Composition / Information on Ingredients Components Paraffinic, Naphthenic Solvent n-hazardous and other components below reportable levels CAS # 64742-47-8 74-98-6 106-97-8 Percent 80-90 5-8 5-8 00001-01 First aid procedures Eye contact Skin contact Inhalation 4 First Aid Measures Immediately flush eyes with plenty of water for at least 15 minutes Remove contact lenses, if present and easy to do Continue rinsing Get medical attention if irritation develops and persists Wash off with warm water and soap Get medical attention if irritation develops and persists If symptoms develop move victim to fresh air Oxygen or artificial respiration if needed Do not use mouth-to-mouth method if victim inhaled the substance Induce artificial respiration with the aid of a pocket mask equipped with a one-way valve or other proper respiratory medical device Get medical attention immediately 1 / 5

Ingestion tes to physician Flammable properties Extinguishing media Suitable extinguishing media Protection of firefighters Specific hazards arising from the chemical Protective equipment and precautions for firefighters Methods for containment Methods for cleaning up If vomiting occurs, keep head low so that stomach content doesn't get into the lungs Do not induce vomiting without advice from poison control center IF SWALLOWED: Immediately call a POISON CENTER or doctor/physician Symptoms may be delayed 5 Fire Fighting Measures Vapor or gas may spread to distant ignition sources and flash back Runoff to sewer may cause fire or explosion hazard Water fog Foam Dry chemical powder Carbon dioxide (CO2) Fire may produce irritating, corrosive and/or toxic gases In case of fire and/or explosion do not breathe fumes Containers should be cooled with water to prevent vapor pressure build up 6 Accidental Release Measures Stop leak if you can do so without risk Move the cylinder to a safe and open area if the leak is irreparable Stop the flow of material, if this is without risk Should not be released into the environment Use a non-combustible material like vermiculite, sand or earth to soak up the product and place into a container for later disposal Small Spills: Wipe up with absorbent material (eg cloth, fleece) Clean surface thoroughly to remove residual contamination Handling Storage 7 Handling and Storage Pressurized container: Do not pierce or burn, even after use Do not smoke while using or until sprayed surface is thoroughly dry Use only in area provided with appropriate exhaust ventilation Do not use if spray button is missing or defective Do not re-use empty containers Avoid contact with skin Avoid contact with eyes Wear personal protective equipment Avoid prolonged exposure Contents under pressure Do not puncture, incinerate or crush The pressure in sealed containers can increase under the influence of heat Do not handle or store near an open flame, heat or other sources of ignition Avoid exposure to long periods of sunlight Store in cool place Keep in an area equipped with sprinklers Keep out of the reach of children Keep away from food, drink and animal feedingstuffs Level 3 Aerosol 8 Exposure Controls / Personal Protection Exposure limits ACGIH Components CAS # TWA STEL Ceiling 74-98-6 1000 ppm t established t established 106-97-8 1000 ppm t established t established OSHA Components CAS # TWA STEL Ceiling 74-98-6 1000 ppm t established t established Personal protective equipment Eye / face protection Chemical goggles are recommended Skin protection Respiratory protection Wear appropriate chemical resistant clothing Chemical resistant gloves Wear positive pressure self-contained breathing apparatus (SCBA) If permissible levels are exceeded use NIOSH mechanical filter / organic vapor cartridge or an air-supplied respirator Appearance 9 Physical & Chemical Properties Compressed liquefied gas 2 / 5

Boiling point Color Density Flammability (HOC) Flash back Flash point Form Freezing point Odor ph Physical state Pressure Solubility Specific gravity Chemical stability Conditions to avoid 356 F (180 C) estimated clear colorless 07653 g/cm3 estimated 40679 kj/g estimated -156 F (-1044 C) Propellant Aerosol t available Solvent t applicable Liquid 35-50 psig @70F Partially 07654 estimated 10 Chemical Stability & Reactivity Information Risk of ignition Heat, flames and sparks 11 Toxicological Information Acute effects Component analysis - LD50 Toxicology Data - Selected LD50s and LC50s Paraffinic, Naphthenic Solvent Sensitization Teratogenicity Acute LD50: 2356 mg/kg estimated, Rat, Dermal 106-97-8 Inhalation LC50 Rat 658 mg/l 4 h 64742-47-8 Inhalation LC50 Rat >52 mg/l 4 h; Oral LD50 Rat >5000 mg/kg; Dermal LD50 Rabbit >2000 mg/kg 74-98-6 Inhalation LC50 Rat 658 mg/l 4 h t expected to be hazardous by OSHA criteria t expected to be hazardous by OSHA criteria Ecotoxicity 12 Ecological Information Components of this product have been identified as having potential environmental concerns LC50 53 mg/l estimated, Fish, 9600 Hours, Waste codes Disposal instructions 13 Disposal Considerations D001: Waste Flammable material with a flash point <140 F Contents under pressure Dispose of this material and its container to hazardous or special waste collection point Do not incinerate sealed containers If discarded, this product is considered a RCRA ignitable waste, D001 14 Transport Information Department of Transportation (DOT) Requirements Proper shipping name Consumer commodity ORM-D Subsidiary hazard class ne 156, 306 Packaging non bulk 156, 306 Packaging bulk ne 3 / 5

IMDG IATA Proper shipping name UN number Item Labels required Transport Category Proper shipping name UN number Labels required AEROSOLS 21 1950 LTD QTY 5F ne 2 Aerosols, flammable 21 1950 LTD QTY 21 15 Regulatory Information US federal regulations This product is a "Hazardous Chemical" as defined by the OSHA Hazard Communication Standard, 29 CFR 19101200 CERCLA/SARA Hazardous Substances - t applicable Occupational Safety and Health Administration (OSHA) 29 CFR 19101200 hazardous chemical CERCLA (Superfund) reportable quantity ne Superfund Amendments and Reauthorization Act of 1986 (SARA) Section 302 extremely hazardous substance Section 311 hazardous chemical Hazard categories (311/312) Immediate Hazard - Delayed Hazard - Fire Hazard - Pressure Hazard - Reactivity Hazard - Inventory status Country(s) or region Inventory name On inventory (yes/no)* China Europe Europe Japan Korea United States & Puerto Rico Inventory of Existing Chemical Substances in China (IECSC) European Inventory of New and Existing Chemicals (EINECS) European List of tified Chemical Substances (ELINCS) Inventory of Existing and New Chemical Substances (ENCS) Existing Chemicals List (ECL) Toxic Substances Control Act (TSCA) Inventory A "" indicates that all components of this product comply with the inventory requirements administered by the governing country(s) State regulations US - Pennsylvania - RTK (Right to Know) List 106-97-8 Present Paraffinic, Naphthenic Solvent 64742-47-8 Present 74-98-6 Present Further information 16 Other Information HMIS is a registered trade and service mark of the NPCA 4 / 5

HMIS ratings Health: 1 Flammability: 4 Physical hazard: 0 Disclaimer The information provided in this Safety Data Sheet is correct to the best of our knowledge, information and belief at the date of its publication The information given is designed only as a guidance for safe handling, use, processing, storage, transportation, disposal and release and is not to be considered a warranty or quality specification The information relates only to the specific material designated and may not be valid for such material used in combination with any other materials or in any process, unless specified in the text The information in the sheet was written based on the best knowledge and experience currently available The information provided in this Safety Data Sheet is correct to the best of our knowledge, information and belief at the date of its publication, The information given is designed only as a guidance for safe handling, use, processing, storage, transportation, disposal and release and is not to be considered a warranty or quality specification, The information relates only to the specific material designated and may not be valid for such material used in combination with any other materials or in any process, unless specified in the text MSDS sections updated Product and Company Identification: Product and Company Identification Composition / Information on Ingredients: Ingredients Physical & Chemical Properties: Physical & Chemical Properties Prepared by Regulatory Compliance 5 / 5