3 Promotion ends June 30, 2014 Linde Laboratory Equipment. Linde is your solution provider technology from around the world, service from around the corner. Protocol Station
02 Linde Laboratory Equipment service@lindecanada.com Regulator trade in program Trade your used cylinder or line regulator in for a new Linde Baseline or Redline regulator and receive a 20% discount. We accept all makes in any condition for a one for one trade. for details. 20% OFF with trade in BASELINE Regulator Redline Regulator BASELINE C1061 Single Stage Cylinder Regulator The BASELINE C1061 series regulator is intended for primary pressure control of non-corrosive, high purity or liquified gases up to grade 5.0 Available in either Chrome plated Brass or 316 Stainless Steel the C1061 offers outlet pressure control up to 500 PSIG. BASELINE C1062 Dual Stage Cylinder Regulator The BASELINE C1062 Dual Stage Regulator for applications that require constant pressure control regardless of source supply pressure. Available in either Chrome plated Brass or 316 Stainless Steel the C1061 offers outlet pressure control up to 250 PSIG. HiQ REDLINE C200/1 Single Stage Cylinder Regulator The REDLINE C200/1 series single stage regulator has been designed for use with specialty gases where demands for purity integrity, tightness and safety are high. When inlet pressure drops by 145 psig, outlet pressure will rise by less than 1.5 psig. Available in either Chrome plated Brass or 316 Stainless Steel, the C200/1 offers outlet pressure control up to 500 psig HiQ REDLINE C200/2 Dual Stage Cylinder Regulator Preferred choice for applications that require constant pressure control, regardless of source supply pressure. When inlet pressure drops by 145 psig, outlet pressure will rise by less than 0.1 psig.
Call 1-866-385-5349 Linde Laboratory Equipment 03 BASELINE C1061 Single Stage Cylinder Regulator BASELINE C1062 Dual Stage Cylinder Regulator The BASELINE C1061 series regulator is intended for primary pressure control of non-corrosive, high purity or liquified gases up to grade 5.0 Available in either Chrome plated Brass or 316 Stainless Steel the C1061 offers outlet pressure control up to 500 PSIG. 11183359 475.00 403.75 The BASELINE C1062 Dual Stage Regulator for applications that require constant pressure control regardless of source supply pressure.available in either Chrome plated Brass or 316 Stainless Steel the C1061 offers outlet pressure control up to 250 PSIG. 11189332 599.00 509.15 SilcoNert Regulator Surface-treated gas apparatus offerings improve cycle times and analytical results, reducing costs in corrosive applications.
04 Linde Laboratory Equipment service@lindecanada.com Model 104R Point of use regulators HiQ REDLINE R200/1 Single Stage Point of use line regulator The Model 104R Point of use regulator is intended for secondary pressure control of non-corrosive, high purity or liquified gases up to grade 5.0. Available in either Chrome plated Brass or 316 Stainless Steel. Comes is six outlet ranges from 0-15 to 0-500 psig. 11186962 445.00 378.25 HiQ REDLINE R200/1 Single Stage Point of use line regulator is designed as a secondary pressure regulating step in central gas supply systems. Its is especially developed for high purity pure gases and mixtures and comes in either Chrome plated Brass or 316 Stainless Steel. Comes in 3 outlet pressure ranges from 15-260 psig. 11227308 488.00 414.80 HiQ REDLINE C200/2 Dual Stage Cylinder Regulator Preferred choice for applications that require constant pressure control, regardless of source supply pressure. When inlet pressure drops by 145 psig, outlet pressure will rise by less than 0.1 psig. Available in either Chrome plated Brass or 316 Stainless Steel the C200/2 is comes in three outlet pressure ranges from 15-260 psig. 11200999 748.00 635.80
Call 1-866-385-5349 Linde Laboratory Equipment 05 Model HiQ Redline A208 semi-auto switchover The gas panel 208 is a semi-automatic switchover designed for uninterrupted gas supply. Switch-over between the two connected cylinders occurs when the pressure on primary side falls below the pre-set pressure level. Available inlet options include 3 stainless steel flex hoses, Stainless steel coil pigtails, manifold connectors or 1/4 FNPT. The panel can be supplied with a contact gauge and alarm so the cylinders can be switched on time or for automatic surveillance. The integral gas purging facility eliminates contamination from entering the gas stream following cylinder replacement. The A208 is available in three out pressure granges from 8-725 psig. Model 538 IntelliSwitch ll The fully-automatic 538 Series IntelliSwitch II gas switchover is a revolutionary next generation of gas management system. The IntelliSwitch II features an onboard Web server and Proprietary embedded software allowing remote monitoring, secure system configuration, and e-mail notification of real-time system status and events. It is ideally suited to interchangeable service continuous supply in analytical laboratory, chemical process, instrumentation and critical gas supply applications. The IntelliSwitch II offers continuous pressure and flow control from liquid or high pressure cylinder sources. The end-user selects the ideal mode of supply by the simple push of a button. Proprietary software logic lowers yearly gas costs by eliminating liquid cylinder vent loss via excess residual return gas management system.
06 Linde Laboratory Equipment service@lindecanada.com Vented Cylinder Cabinets - F4000 Series Linde s gas safety cabinets are designed to provide maximum protection from hazardous gas cylinder leaks. When connected to a proper exhaust system, a constant gas flow pattern is achieved, ensuring that leakage does not accumulate. A variety of standard gas safety cabinets are available for housing one to four cylinders. Each unit is equipped with strut channel to accommodate the mounting of gas panels, cylinder brackets as well as cylinder shelves Features Diffusion Plate: (instead of louvers): Offers better ventilation due to lower air resistance and better flow patterns. Cabinet shell and doors constructed of 11 gauge (0.12 thick) cold rolled steel to provide maximum strength. Self closing, self latching doors with locks. Weather resistant white polyurethane paint. 1/4 thick wire reinforced safety glass. Lockable access hatches designed to maintain 200ft./min. air velocity when open. Hatches allow for safe closing of any valve even in the event of toxic gas leak. 165 degree F sprinkler head. Rubber floor mat provided to ensure a non-slip surface for cylinder. F4001-One Cylinder Cabinet F4002-Two Cylinder Cabinet F4003-Three Cylinder Cabinet F4004-Four Cylinder Cabinet F4005-One Cylinder Mini Cabinet
Call 1-866-385-5349 Bump Test & Calibration Gas Linde Laboratory Equipment 07 Gas Detection Equipment requires regular bump test and calibration as they protect people from hazardous situations caused by toxic, corrosive or flammable gas that has escaped into the area in which that person is working. As a global supplier of gases, Linde is able to provide you with the calibration gas you require to ensure that your gas detection equipment is correctly bump test and calibrated every time. We manufacture a diverse range of gases engineered to meet a wide range of measurement, process control requirements and industry standards. Using state of the art technology we are able to produce highly stable and accurate gas mixtures specific to your needs, for reliable and repeatable calibration time and time again. This enables the wearer to carry out their responsibilities secure in the knowledge that their safety is taken care of. From large cylinders for high volume users to lightweight portable cylinders, Linde offers a comprehensive line to meet your calibration gas requirements. Portable Solutions Analytical calibration is not limited to the laboratory. Other areas include facility monitors, perimeter emission monitoring, remote exhaust monitoring, stack emission sensor calibration and many more. These calibrations require specialty gases available in a portable, easy to use package that is user friendly, and safety conscious. The all-in-one system enhances portability and convenience for remote calibration an environmentally friendly alternative to traditional single use portable cylinders. Disposable Cylinder Packages In addition to the innovative & award winning ECOCYL, which represents the ultimate in portability and integrated convenience for a re-usable cylinder package, Linde offers a range of conventional disposable small cylinder packages. Our extensive portable calibration gas (PCG) line meets a broad range of applications including industrial hygiene & safety, quality control and environmental monitoring. With our non-refillable PCG cylinders, rental charges and two-way freight charges are eliminated a convenient alternative to refillable cylinders. ECOCYL - Award winning innovation ECOCYL is a refillable, small, high-pressure cylinder with an integrated regulator and a flow meter within the cylinder valve. The flow rate can be precisely selected from preset data. What s more, the cylinder unit weighs only two kilograms and can be carried with a shoulder strap. ECOCYL offers an economical solution: Contains over 50% more gas than most one way containers No extra pressure regulator or additional flow meter is required ondemand regulator model available No disposal or storage costs for empty containers
08 Linde Laboratory Equipment service@lindecanada.com Be precise with accurate EPA Protocols. Accurate EPA protocol gases.accurate information. Accurate reporting. As your supplier, Linde offers the most comprehensive range of highest quality standards your industry demands. Local Manufacturing, Local Distribution Linde manufactures a broad range of EPA Protocol gases in Canada. Product deliveries are made by Linde employees on Linde-owned trucks. Our local capabilities ensure we minimize delivery lead times. Accuracy Affects Your Profitability With precision, Linde accurately manufactures EPA protocol gases to meet requirements defined in EPA-600/R-12/531 EPA Traceability Protocol for Assay and Certification of Gaseous Calibration Standards. The accuracy of these calibration gases is critical to: offer daily assurance that data from continuous emission monitoring (CEM) systems is valid and representative produce accurate Relative Accuracy Test Audit (RATA) results A Proud History, The Brightest Future 2002 Matheson Gas Products Canada acquired by BOC 2006 Spectra Gases Inc. joins Linde 2007 Linde acquires BOC to create the world s leading gases group Linde s Environmental Division is recognized around the world as the preeminent manufacturer of calibration gas standards for the environmental monitoring community. Linde offers a proven track record manufacturing EPA protocol gases in Canada. Our reputation for unsurpassed local technical support is well known within the industry. Defining Your Need Linde North America has two production sites that are registered participants in the US EPA Protocol Gas Verification Program (PGVP) for stationary source monitoring and ambient air monitoring. All Linde US EPA Protocols that are produced at the Alpha, New Jersey and Whitby, Ontario sites are certified to be manufactured in strict accordance with US EPA protocol requirements. All Linde cylinders containing an US EPA Protocol gas are delivered with a detailed Certificate of Accuracy containing our manufacturing site US EPA Vendor ID number. Precision matters in everything we do. Linde Specialists will evaluate your calibration requirements and recommend calibration gases to provide the best fit for your organization. We examine usage patterns to define stocking levels that ensure seamless distribution to your facilities. We offer a variety of equipment supply options designed to maintain the integrity of your gas between the supply cylinder and point of use. We suggest our recertification service to extend the life of expensive protocol gases. To learn more about our EPA Protocol gases, call Canada s leading Specialty Gas team at 1-866-385-5349. Protocol Station Protocol Station is designed for the convenient wall mounting of any Linde high purity regulator. It provides ease of use, prevents regulator damage, and improves safety. The protocol station is available in chromeplated brass or 316 Stainless steel construction, as specified by the regulator series. This option comes with a 3-foot flexible stainless steel hose with armor casing and a check valve. For option and price, please contact Linde
Call 1-866-385-5349 Linde Laboratory Equipment 09 Lab pump specials 10% OFF RV Series Pumps Edwards RV pumps have become the industry standard for scientific primary pumping applications. RV pumps are uniquely capable of delivering high or low throughputs with high ultimate vacuum. This, combined with ultra-low noise levels makes them ideal for a wide range of applications including GCMS and other small bench top type applications. SAP # Special 11189131 RV3 2,411.00 11189132 RV5 2,662.00 SAP # Special 11189133 RV8 2,914.00 11189134 RV12 3,354.00 Edwards nxds. Oil-Free Scroll Vacuum Pump. The nxds is up to 20 times quieter than other pumps. Its intelligent control functions and up to five year service interval offer low cost of ownership, making it the small dry pump of choice for today s most advanced technologies. Advanced scroll-form and tip-seal technologies deliver best-in-class vacuum performance Quiet operation <52 db(a) for minimal environmental impact Intelligent and easy to use control functions with simple operation Up to five year service interval for low cost of ownership Hermetically sealed for a lubricant-free vacuum environment Pump range includes 6, 10, 15 and 20 m 3 h -1 Improved ultimate vacuum 11252390 nxds6i 6,683.00 6,014.00 11253263 nxds10i 8,356.00 7,520.00 11252761 nxds15i 10,028.00 9,025.00 Quantity discount available, please contact Linde
010 Linde Laboratory Equipment service@lindecanada.com Hydrogen No-Maintenance Series Description The HiQ hydrogen generator is a no-maintenance device with innovative membrane-technology. Its advanced dual-column drying system automatically removes residual moisture from the hydrogen produced. The column materials are also regenerated automatically, and in the final purification not even a desiccant cartridge is needed. For the electrolytic dissociation process, the HiQ hydrogen generator requires no caustic chemical solutions. Instead, it uses harmless deionized water to produce a reliable, continuous output of 6.0 hydrogen (>99.9999% pure). System operating status and diagnostic data appear on a user-friendly digital display. In case of an internal error, the unit is put on standby by an auto-shut-off procedure. Selectable, multiple alarms alert to unwanted shifts in operating conditions such as low water level, poor water quality, low pressure (leak) and power supply conditions. Hydrogen flow and water quality are monitored by continuous LCD indication. The gas delivery pressure is indicated by LCD and can be adjusted manually via a membrane control pad. A cable interface permits remote computer monitoring of all functions. Technical Data Max H2 flow rate 0.10; 0.16; 0.25; 0.50 l/min Delivery pressure 1 155 psig 10 1,050 kpa H2 purity >99.9999% (>6.0) Electrolysis cell Solid polymer membrane Safety Auto shut-off and low internal volume (< 40ml) Auto-drying system No maintenance of drying cartridges (exclusive system) Water Deionized or distilled User interface Set points, system status, user parameter Display LCD display 128 x 64 pixels, set points, status, alarms I/O board containing: RS232C bi-directional/2 ports RS485 Options Cascading up to 32 units Potential free relay contacts Software for PC-control capability (requires I/O board) Dimensions (WxDxH) 23 x 35 x 43 cm 9 x 14 x 17 Weights NMH2 100/160/250 17 kg 37.5 lbs NMH2 500 18 kg 40 lbs Certification compliant HiQ Nitrogen LC/MS EVO Generator Back Up Panel The nitrogen LC/MS EVO generator with integral oil-free air compressor delivers a continuous streem of 98.5%+ pure nitrogen gas with a residual oxygen content of less than 2% at a flow rate of up to 35 lpm. The nitrogen LC/MS EVO gas generator is ideal for laboratory applications like LC/ MS techniques and other inert gas demanded applications. 11263663 15,131.00 13,618.00 The generator back-up panel is designed to provide a reserve supply to a gas generator. If there is a loss of power, or if the gas generator cannot provide sufficient gas to the system, the reserve supply will automatically activate and supply gas without interuption. When the generator is capable of supplying the system, the reserve shuts down. Back-up panels are available for hydrogen, air and nitrogen in brass or 316 stainless steel construction. With the available remote alarm package the system can signal when the reserve supply is active or running low.
Call 1-866-385-5349 Linde Laboratory Equipment 011 Safety First. Linde Gas Safety Seminars. No matter whether gas usage is a large or seemingly small part of your company s total operations, teaching your employees the properties and potential risks of different gases can lead to increased levels of safety. Allow our highly trained instructors to teach your employees how to safely use, store and handle different compressed and liquefied gases. For companies with unique safety training needs, courses can be customized to focus on certain topics or site-specific issues. Who should attend a Linde safety training course? Everyone who comes into contact or handles gases Managers and supervisors of departments that use gases Anyone responsible for health and safety What are some of the benefits? Safety training ensures that your employees understand the properties and risks of common gases Your employees receive instruction from industry-trained experts with years of experience in gas safety topics Cost-effective training held on site or at prescheduled open sessions Your employees will profit from best practices and procedures that can be implemented immediately at your site Seminar topics include: General gases knowledge Gas cylinders safety features, markings and labels Handling guidelines including recommended personal protective equipment Equipment selection, installation and operation Storage requirements Understanding dangers and hazard prevention To learn more about our Gas and Equipment Safety Seminars, call Canada s leading Specialty Gas team at 1-866-385-5349.
012 Linde Laboratory Equipment service@lindecanada.com Cryogenic Dewars 11232198 XTL3 857.00 771.00 11233348 XTL8 1,008.00 905.00 11233347 XTL10 925.00 832.00 11233346 XTL20 1,037.00 934.00 11233345 XTL34 1,233.00 1,109.00 Flowmeters - Model FM-1000 Cryogenic Refrigerators Single Tube Unit, Aluminium with Buna-N seals as the end Blocks. Inlet valve 1/8 NPT Female Connection. Back in Back Connection Orientation. j410 Tube (0.5-9.5 slpm). 11079243 225.00 158.00 Linde has a complete range of advanced cryogenic refrigerators and dewars to meet your needs. From cryosurgery to sample storage, our comprehensive series of high-performance containers are designed for maximum holding times for optimum capacities. Promotion ends June 30, 2014 while supplies last Prices do not include taxes or delivery charges Actual items on promotion may differ from those pictured Any errors in the prices specified in this promotional catalogue are subject to correction Linde Canada Limited 5860 Chedworth Way, Mississauga, Ontario L5R 0A2 Phone 1-866-385-5349, Fax 1-866-385-5347, www.lindecanada.com, service@lindecanada.com Linde Canada Limited of the Linde Group. Linde is a trading name used by companies within The Linde Group. The Linde logo and the words Linde and HiQ, REDLINE, BASELINE and ECOCYL are trademarks of The Linde Group. The Linde Group 2014. 2154E_0114