ACCESSORIES HC RELAYS (Sockets and Terminal ) FEATURES. HC Relay Sockets In the table below, the suitable for each type of HC relay is indicated by a black dot. ) Plug-in type, type, and wrapping type are available for HC relays. ) Certified by UL and CSA ) A hold-down clip is included in the package.. HC Relay Terminal In the table below, the suitable for each type of HC relay is indicated by a black dot. ) Ordinary and for DIN rail assembly are available. ) Certified by UL/C-UL ) A hold-down clip is included in the package. The fixing method is the same as for HC, ordinary HC and HL. The fixing method is the same as for. The fixing method is the same as for the HC DIN rail HC/HL-LEAF-SPRING-MK Ordinary HC/HL-LEAF-SPRING-MK DIN rail Terminal HC-LEAF-SPRING-K SELECTOR CHART. Sockets Type No. of pole Product name Part No. Plug-in Wrapping Standard packing: Carton: 0 pcs.; Case: 00 pcs. Notes:. Use the hold-down clip that is shipped with the.. Certified by UL and CSA (except for wrapping ). (*) Please use with a max. carrying current no higher than A. Applicable HC relay (Plug-in type) Standard type/with diode type (for DC) Form C Form C Form C Form C Form C Amber type Form C Form C Form C Form C -pole HC- HC-SS-K -pole HC- HC-SS-K -pole HC- HC-SS-K //-pole (common) HC- HC-SS-K * * -pole HC- for HC-PS-K -pole HC- for HC-PS-K -pole HC- for HC-PS-K //-pole (common) HC- for HC-PS-K * * //-pole (common) HC-wrapping HC-WS-K * * HC-wrapping (spring) HC-WS * *. Terminal (HC Terminal ) Type No. of pole Item Part No. For DIN rail For general Standard packing Applicable HC relay (Plug-in type) Standard type/with diode type (for DC) Carton Case Form C Form C Form C Form C Form C Amber type Form C Form C Form C Form C -pole HC-slim type DIN HC-SFD-S 0 pcs. 00 pcs. /-pole HC-DIN HC-SFD-K pcs. 0 pcs. //-pole (common) HC vertical HC-TSF-K pcs. 0 pcs. * -pole HC- HC-SF-K 0 pcs. 00 pcs. /-pole HC-high HC-HSF-K pcs. 0 pcs. //-pole (common) HC-high HC-HSF-K pcs. 0 pcs. * Notes:. Use the hold-down clip that is shipped with the.. Certified by UL/C-UL (except for HC-TSF-K).. In order to prevent breakage and disfiguring, the screw tightening torque for the should be within the range of 0. to 0. N m { to kgf cm}. (*) Please use with a max. carrying current no higher than A. ASCTBE 00-T
. Terminal (HJ Terminal ) Type No. of pole Item Part No. For DIN rail -pole //-pole (common) Note: When using HJ-SFD/HJ-SFD-S with HC relay Form C/ Form C as a set, please keep the max. continuous current no higher than A. (*) Please use with a max. carrying current no higher than A. RATING Specifications (Sockets) Item Type Applicable HC relay (Plug-in type) Standard packing Standard type/with diode type (for DC) Amber type Carton Case Form C Form C Form C Form C Form C Form C HJ- HJ-SFD HJ- HJ-SFD-S (Finger protect type) 0 pcs. 00 pcs. HJ- HJ-SFD * HJ- HJ-SFD-S * (Finger protect type) HC HC HC HC Performance HC HC HC HC Contact arrangement Form C (-pole) Form C (-pole) Form C (/-pole common) Form C (//-pole common) Max. continuous current (Ambient temperature: -0 to +0 C - to + F) 0A 0A A A A A A A Breakdown voltage (Initial) Between open contacts sets and coil, 000 Vrms for min. (Detection current: 0mA) Initial insulation resistance 00 MΩ between each (00V DC) Note: When using / pole HC relay (0A, A rating) on a Form C that is //-pole common, please use within a range that does not exceed the max. continuous current (A). Specifications (Terminal ) Item Type HC-slim HC HC For general HC Performance HC-high For general HC-high HC-high vertical type HC For general Contact arrangement Form C (-pole) Form C (/-pole common) Form C (//-pole common) Max. continuous current (Ambient temperature: -0 to +0 C - to + F) A A A A A A A A Breakdown voltage (Initial) Between open contacts sets and coil, 000 Vrms for min. (Detection current: 0mA) Initial insulation resistance 00 MΩ between each (00V DC) Note: When using a -pole HC relay (0A) on Form C that is //-pole common, please use within a range that does not exceed the max. continuous current (A). ASCTBE 00-T
DIMENSIONS (mm inch). Plug-in type HC-Socket (HC-SS-K) The CAD data of the products with a mark can be downloaded from: http://industrial.panasonic.com/ac/e/ HC-Socket (HC-SS-K) 0..00. 0..00...0....00..0....00 General tolerance: ±0. ±.0..0 General tolerance: ±0. ±.0..0 HC-Socket (HC-SS-K) HC-Socket (HC-SS-K)..00..0 0..0..0 0..00...0....0....00 General tolerance: ±0. ±.0..0 General tolerance: ±0. ±.0..0 Side-by-side installation With a relay mounted (HC-SS-K)..0..0..0....0..0 General tolerance: ±0. ±.00 Notes:. Applicable chassis board thickness is.0 to.0 mm.. Installation is easy by inserting the from the top into the holes and by depressing the two down arrows on the retention fitting from the front. Hold-down clip is packaged with the. ASCTBE 00-T
. type HC- type (HC-PS-K) HC- type (HC-PS-K) 0..0. 0..00..0...0.. General tolerance: ±0. ±.0.. General tolerance: ±0. ±.0.. HC- type (HC-PS-K) HC- type (HC-PS-K)..0 0..0..0 0..00..0.. General tolerance: ±0. ±.0 pattern (Bottom view) With a relay mounted General tolerance: ±0. ±.0.. Side-by-side installation.. Hold-down clip is packaged with the...0 Form C Form C Form C Form C..0..0..0..0..0..0..0..0............0 - dia. hole -.0 dia. - dia. hole -.0 dia. - dia. hole -.0 dia...0 - dia. hole -.0 dia... General tolerance: ±0. ±.00 dia. hole.0 dia. ASCTBE 00-T
. Wrapping type Standard wrapping type (HC-WS-K)..00.0±0..0±.00 Hold-down clip (Hold-down clip is packaged with the ). 0..0.0..0.... Terminal cross section ±0..0±.00.0±0..0±.00 ±0.0.0±.00 General tolerance: ±0. ±.0 Note: The external and mounting dimensions are the same for -pole (HC-WS-K), -pole (HC-WS-K), and -pole (HC-WS-K) types. Only the number of s varies. Wrapping type with hold-down clip (HC-WS) Terminal cross section ±0..0±.00.0 ±0.0.0±.00...0.0..0..00. 0..0 General tolerance: ±0. ±.0 Side-by-side installation..0..0..0....0..0 General tolerance: ±0. ±.00 Notes:. Applicable chassis board thickness is.0 to.0 mm.. Installation is easy by inserting the from the top into the holes and by depressing the two down arrows on the retention fitting from the front. ASCTBE 00-T
. DIN rail Terminal HC-Slim type DIN rail (HC-SFD-S) ±0..±.0 ±0. ±.00 M. screw 0±0..±.0 N.C. N.O..±0..±.00.±0..±.00.±0..±.00 ±0..0±.00 ±.±.0 ±0..±.00.±0..±.0 ±.±.0.±0..±.00 COM. ±0..±.0.±0..±.0.±0..±.0 ±0..±.0 General tolerance: ±0. ±.00 Coil HC-high DIN rail (HC-SFD-K) ±0..0±.0 M. screw.±0..±.0 N.C. N.O. ±0. ±.00 ±0. ±.00 ±0. ±.00.±0..00±.00.±0..±.0 ±.±.0 COM.. 0±0..±.0 Coil General tolerance: ±0. ±.00 HC vertical type (HC-TSF-K) -. over hole -.. ±0..±.0 M. screw.±0..±.0 ±.±.0 ±.±.0 0.. 0±0..±.0 General tolerance: ±0. ±.00 HC-Slim type HC, HC and HC HC vertical type 0.. ±0. ±0..±.00.±.00.0.0...0 -M. screw hole. (or.±0. dia. hole) ±0. -M. screw hole.±.00 (or.±.00 dia. hole)... Panel hole dimensions for side-by-side mounting... -M. screw hole (or.±0. dia. hole) -M. screw hole (or.±.00 dia. hole) 0......0.. Panel hole dimensions for side-by-side mounting -M. screw hole (or.±0. dia. hole) -M. screw hole (or.±.00 dia. hole) General tolerance: ±0. ±.00 ASCTBE 00-T
. Ordinary HC- (HC-SF-K for HC) -. over hole -....... 0. M. screw 0...0 General tolerance: ±0. ±.00 HC-high (HC-HSF-K) suitable for both HC and HC -. over hole -........0. M. screw.. 0...0...0 Screw hole dimensions General tolerance: ±0. ±.00 HC-high (HC-HSF-K) suitable for HC, and -. over hole -...... 0..0. M. screw.. 0...0...0 Screw hole dimensions General tolerance: ±0. ±.00 HC-SF-K HC-HSF-K and HC-HSF-K With a relay mounted (HC-SF-K)..0.... Panel hole dimensions for side-by-side mounting -M. screw hole (or.±0. dia. hole) -M. screw hole (or.±.00 dia. hole) 0.......... Panel hole dimensions for side-by-side mounting..0. -M. screw hole (or.±0. dia. hole) -M. screw hole (or.±.00 dia. hole) General tolerance: ±0. ±.00 Hold-down clip is packaged with the. ASCTBE 00-T