D C P L OXYGEN / NITROGEN PLANT

Similar documents
TURBO OXYGEN NITROGEN PLANT

/ /

4-7 kw/ hp. Dual Output Compressors (Air/Nitrogen) Driving Nitrogen Forward

High Pressure Breathing Air Compressors


Earlier Lecture. In the earlier lecture, we have seen Kapitza & Heylandt systems which are the modifications of the Claude System.

Linde Cryogenics. Helium Recovery Systems.

The Compact, Portable, Efficient and Economical Solution to boost Shop Compressed Air Pressure by 2 or 3 times

V-Major, V-Compact. Reciprocating Compressors. Intelligent Air Technology

WatMan WATER RO SYSTEMS FOR DESALINATION

Nitrogen Advantage. Better Tire Pressure Retention. Improved Fuel Economy. Extended Tread Life. Elimination of Oxidation. Reduction in Tire Failures

Trifecta High-Pressure Systems

Trifecta Systems. Cryogenic Equipment for High Performance Gas Supply. Trifecta Product Catalog

hydro-pac, inc. Low-Pressure Gas Compressors 1500 to 6000 PSI

ON-SITE INDUSTRIAL GASES. Nitrogen & Oxygen Generators

INTRODUCTION. The Quantum Technology system has the following advantages:, as it does not need plastic gas-bags which are volume-consuming,

Balston Nitrogen Generation Systems

Applied Compression s nitrogen generator packages offer users a cost-effective alternative to costly bottled nitrogen.

AirSep PSA Nitrogen Systems

Design. Pompetravaini-NSB API SB Liquid Ring Compressor for Gas Processing. Working Principle

To plot the following performance characteristics; A pump is a device, which lifts water from a lower level to a higher

TEST BENCH FOR SAFETY VALVES

CO 2 radial piston compressor (transcritical)

Standard Operating and Maintenance Instructions for Pumping System Model PS-90

Guideline No.M-05(201510) M-05 AIR COMPRESSOR. Issued date: 20 October China Classification Society

11 Air ends 12 Motor 13 Belt driven. 1. ELECTRONIC REGULATION The ES4000 is a control system, designed for medium and high power compressors.

Oxygen Generating Systems Ozone Medical Welding Glassblowing Aquaculture Pulp & Paper Wastewater

Potter Nitrogen Generators

CNG FILLING STATIONS

CompAir provide high quality and reliable Nitrogen solutions

SULLAIR SX Filtration Series ,000 scfm

NITRON MG SERIES MEMBRANE NITROGEN GENERATORS

Gas Boosters & Systems

NGN Series nitrogen generator

MOBILAIR M 235. Portable Compressor With the world-renowned SIGMA PROFILE Flow rate 18.1 to 23.3 m³/min ( cfm)

Product Range. High performance and economic high pressure solutions Made in Germany

400H HARDMOUNT AIR COMPRESSOR KIT PART NO H HARDMOUNT AIR COMPRESSOR KIT PART NO

AIR DRIVEN. Gas Boosters & SYSTEMS. Accepting VISA, MasterCard and American Express

WORKHOLDING APPLICATION BOOKLET

MOBILAIR M 210 / M 235. Portable Compressor With the world-renowned SIGMA PROFILE Flow rate 18.0 to 23.3 m³/min ( cfm) COMPRESSORS

Nitrogen Generators. PMNG Commercial Series. Section 50 Bulletin A -20

Performance and Reliability

SRL SEries. Oil Free Scroll Air Compressors hp kw

Air Amplifiers & SYSTEMS

Liquid Gas Cylinder (LGC)

Brief history in the Biogas sector. Compressor features. Applications. Product range. Experience

the new Ve- / VSE Range

CO 2 and O 2 scrubbers

Detector Carrier Gas Comments Detector anode purge or reference gas. Electron Capture Nitrogen Maximum sensitivity Nitrogen Argon/Methane

All technical data may be changed MADE IN ITALY BY NARDI COMPRESSORI

- Cost for regular gas filling. - Additinal costs, i.e. tank rent, delivery. - Cost for regular liquid nitrogen filling

AIR DRIVEN LIQUID PUMPS AIR DRIVEN AIR AMPLIFIERS AIR DRIVEN GAS BOOSTERS HIGH PRESSURE VALVES, FITTINGS AND TUBING TEST AND CALIBRATION EQUIPMENT

Installation restrictions for length of sections should also be noted.

Mobile High Pressure Compressor Unit for Compressing Air and Breathing Air. PE 250-TE with compressor control (optional equipment)

Simplicity in VRU by using a Beam Gas Compressor

Niltox Breathing Air Purifier Range

Nitrogen Generation Systems

Unique solutions for Oxygen and Nitrogen supply

Nitrogen Tyre Inflator Owner s Manual

Screw Compressors 11-22kW

TECHNICAL DATA MAINTENANCE AIR COMPRESSOR MODEL G-1

RHIC CRYOGENIC SYSTEMS MAINTENANCE PROGRAM

Pressure and Flow Control Valves DBGM, German and European Patents

OPERATION MANUAL NTF-15

Membrane modules for nitrogen and oxygen generator systems. Technology Overview ENGINEERING YOUR SUCCESS.

OPERATION MANUAL NTF-60 Plus

TECHNICAL SPECIFICATION. SPC-1 Stirling Process Cryogenerator

Copyright, 2005 GPM Hydraulic Consulting, Inc.

TECHNICAL SPECIFICATION. SPC-4 Stirling Process Cryogenerator

97C COMPRESSOR KIT 12V PART NO C COMPRESSOR KIT 24V PART NO C COMPRESSOR KIT PART NO

Industrial Compressor

Standard Operating and Maintenance Instructions for Pumping System Model PS-150

Hydro Plant Risk Assessment Guide

Your local gas generation partner. Precision series Modular gas generation solution for GC.

Tradition & Technology

Unit 24: Applications of Pneumatics and Hydraulics

Liquid ring vacuum pumps single-stage

250C-IG COMPRESSOR KIT 12V PART NO C-IG COMPRESSOR KIT 24V PART NO

The Shand & Jurs Model Vapor Guard Tank Blanketing Valve

CRYOGENIC SERIES Regulators, Pressure Gauges, Shut-off Valves, Relief Valves Technology for a Better Future

Liquid ring vacuum pumps in compact design

Compressors. Basic Classification and design overview

250C-IG COMPRESSOR KIT 12V PART NO C-IG COMPRESSOR KIT 24V PART NO

TECHNICAL SPECIFICATION. StirLIN-1 Extendible Liquid Nitrogen System

Air Operated Hydraulic Pumping Systems to 50,000 psi

AIR SYSTEM TABLE 1 SPECIAL COMPRESSOR SYSTEM DISCHARGE PRESSURE REQUIREMENTS TYPE. M.P. 1.0 mfa(s) (140 psis) oil free PNGS - Self lubricated

Fundamentals of Compressed Air Systems. Pre-Workshop Assignment

MEDICAL EQUIPMENT CATALOG

FlashCO2, CO2 at 23 $/ton

STANDARD HIGH PRESSURE COMPRESSORS COMPACT PACKAGE FOR DEMANDING APPLICATIONS

200 PSI COMPRESSORS - MODEL NUMBERS

100C Air Compressor Kit

IMPORTANT SAFETY INSTRUCTIONS

E 328 E 498 Tank top mounting Connection up to G1½ / -24 SAE and SAE 2 Nominal flow rate up to 600 l/min / gpm

THE WATER-COOLED INDUSTRIAL RANGE

air driven Standard air gas liquid for high pressure: contents Chatsworth, California, USA

Your local gas generation partner. Precision series Modular gas generation solution for GC.

GLOSSARY OF TERMS. Adiabatic Compression Compression process when all heat of compression is retained in the gas being compressed.

THE COMPACT LINE. Mobile power packs in convincing BAUER quality l/min 225 / 330 bar TOUGH RELIABLE WELL ESTABLISHED

POWER IS PRODUCED IN THE HEAD

Transcription:

D C P L OXYGEN / NITROGEN PLANT DCPL MED SERIES OXYGEN CYLINDER FILLING PLANTS (Industrial Oxygen & Medical Oxygen) O N 2 2

DCPL- MED- SERIES OXYGEN AIR COMPRESSOR / NITROGEN PLANTS AIR COMPRESSOR Air compressor( ATLA SCOPCO ) Air is compressed at a Low Pressure of 7-8 Bar. Air can be compressed at such low pressure by trouble free rotary compressor (screw / centrifugal type advanced technology) for power saving. 1 1. Elektronikon Automatic electronic control and monitoring of the compressor optimizes the operation for efficiency, reliability and ease of maintenance. 2. Fan Low speed radial fan provides a high cooling air flow at extremely low noise levels. 3. Integral coolers Compact coolers dimensioned to ensure ideal running temperatures under all conditions and are easy to clean. 4. Multi-stage oil separator Three-stage oil separation process yields a 2 ppm oil carry-over 2 3 1 for minimum contamination and maintenance. 5. Air inlet filter Heavy-duty, multi-stage inlet filter offers particle removal down to 1 micron. Large element surface for long lifetime and minimal pressure drop. 6. Drive arrangement Gear driven for optimal energy efficiency and minimal maintenance. Utilizes flexible coupling for reduction of starting torque loads on compressor components. 4 5 6 7 7. Motor High efficiency, totally enclosed fan-cooled (TEFC), IP55, class F electrical motor is flanged and permanently aligned with the compressor to ensure continuous, trouble-free operation.

DCPL- MED- SERIES OXYGEN AIR COMPRESSOR / NITROGEN PLANTS PROCESS SKID This consists of the following items: 1.After Cooler with Tank 2.Nitrogen Cooler with Tank 3.Moisture Separator (PURGER) 4.Chilling Unit with Freon Unit. 5. 3 Stage Medical Hankinson Filter 6.Molecular Sieve Battery on skid 7.Medical Bacteria Filter 8.Gas/Air Lines as per Standard Layout on skid/platform. 9.Water Pump 10.Inlet and Outlet Water Lines 11.Drain Manifold complete with Ball Valves for draining mositure. MOLECULAR SIEVE BATTERY Complete with 2 Nos M.S. Vessel Reactivation heater complete with Molecular sieve of Zeochem France designed for process skid mounting-1no. All the above equipments are neatly mountedon a skid/platform complete with inter-connect-ing piping and ready for installation.-1 Set. CRYOGENIC EXPANDER Complete with Motor/starter/starter shall be Siemens /ABB/Kiirloskar,with hydraulic valve control bursting disc for safety,complete with Flywheel pressure guage, Motor pulley V-Belts,Belt Guard slide rails inter connecting copper pipes(inlet & Outlet) -1 No.

DCPL- MED- SERIES OXYGEN AIR COMPRESSOR / NITROGEN PLANTS AIR SEPARATION UNIT (Air separation column-cold box) Consists of outer steel casing,main heat exchanger,liquifier,bottom column,top column,condensor, Sub-cooler,Liquid oxygen & nitrogen filter.cooling pipe line,insulation material,digital electronic temperature indicator & scanner,pt 100 sensor,dp gauge monometer,expansion vavle with longstemp type with pointer & index & wheel -1 set. LIQUID OXYGEN PUMP With S.S. Jacket,Piston Liner Complete with electric motor piston rings,safety device amd non-return valve-1 No. CYLINDER FILLING MANIFOLD Complete with socket,control valve pressure gaugesafety valves and filling connections mounted on a stand -1 Set. ELECTRICAL PANEL Electrical panel complete with ON/OFF switches-1 No. COOLING TOWER FRP Cooling Tower complete with fan and motor -1 Set. OPTION ITEMS Other option items also available on request.

DCPL- MED- SERIES OXYGEN AIR COMPRESSOR / NITROGEN PLANTS TECHNICAL SPECIFICATIONS SMALL CAPACITY S.No. 1. MODEL Capacity Oxygen Nitrogen DCPL-20P 20 CuM/Hr 80 CuM/Hr DCPL-30P 30 CuM/Hr 120 CuM/Hr DCPL-40P 40 CuM/Hr 160 CuM/Hr DCPL-50P 50 CuM/Hr 200 CuM/Hr 2. Purity Oxygen Nitrogen(Optional) 99.7% to 99.8% 96%-99.6% 99.7% to 99.8% 99.7% to 99.8% 99.7% to 99.8% 96%-99.6% 96%-99.6% 96%-99.6% 3. Power Connection 65KW 75KW 92KW 92KW 4. 3 Phase Power Supply 5. Area Required 7MX8M 8 MX10M 8MX10M 8MX10M 6. Height of Shed/ Room 6.5M 7.5M 7.5M 7.5M MEDIUM CAPACITY S.No. 1. MODEL Capacity Oxygen Nitrogen DCPL-100P 100 CuM/Hr 300 CuM/Hr DCPL-130P 130 CuM/Hr 390 CuM/Hr DCPL-150P 150 CuM/Hr 450 CuM/Hr DCPL-170P 170 CuM/Hr 510 CuM/Hr 2. Purity Oxygen Nitrogen(Optional) 99.7% to 99.8% 99.7% to 99.8% 99.7% to 99.8% 99.7% to 99.8% 96%-99.6% 96%-99.6% 96%-99.6% 96%-99.6% 3. Power Connection 165KW 170KW 200KW 210KW 4. 5. 3 Phase Power Supply Area Required 14MX15M 14 MX15M 14MX15M 14MX15M 6. Height of Shed/ Room

HIGH CAPACITY S.No. MODEL DCPL-200P DCPL-300P DCPL-400P DCPL-500P DCPL-600P Capacity Oxygen 200 CuM/Hr 300 CuM/Hr 400 CuM/Hr 500 CuM/Hr 600 CuM/Hr 1. Nitrogen 800 CuM/Hr 1200 CuM/Hr 1400 CuM/Hr 2000 CuM/Hr 2400 CuM/Hr 2. Purity Oxygen Nitrogen(Optional) 99.7% to 99.8% 99.7% to 99.8% 99.7% to 99.8% 99.7% to 99.8% 99.7% to 99.8% 96%-99.6% 96%-99.6% 96%-99.6% 96%-99.6% 96%-99.6% 3. Power Connection 280KW 350KW 450KW 600KW 720KW 4. 3 Phase Power Supply 5. Area Required 14MX15M 15 MX16M 15MX18M 18MX20M 18MX20M 6. Height of Shed/ Room OPTIONAL 10 M 10M 10M High Purity of Nitrogen also available.higher Capacities of 400 CuM/Hr & 500 CuM/Hr are also available with liquid output. Liquid Nitrogen Pump Nitrogen Compressor Liquid Plants Notes: 1.About 40% of Nitrogen is used for the regeneration of the Molecular Sieve Battery. 2.The above capacities are based on gaseous output on design Suction Conditions of 30deg cen,760mm hg pressure,50% relative humidity & 0.03% Carbon dioxide in the atomsphere. 3.Oxygen/Nitrogen is filled in Cylinders at 155 Bar pressure(optional 200 & 300 BAR). 4.The above specifications are subject to modification. CYLINDER FILLING CHART Name of the Models Capacity (CuM/Hr) No. Of cylinders in a Day (Oxygen/Nitrogen) SALIENT FEATURES DCPL-20P DCPL-30P DCPL-40P DCPL-50 DCPL-100P DCPL-130PDCPL-150P DCPL-170P DCPL-200P DCPL-300P DCPL-400P DCPL-500P DCPL-600P 20 30 40 50 100 130 150 170 200 300 400 500 600 80 120 160 200 400 520 600 680 800 1200 1600 2000 2400 NOTE:-Cylinder capacity 5 to 7 cubic meter. LOW WORKING PRESSURE LOW OPERATING COST STURDY DESIGN LOW MAINTENANCE SIMPLE OPERATION HIGH SAFTEY DESIGN QUALITY We manufacture oxygen plants as per the latest technology & design of the company This technology has been proven all over the world for its working efficiency & trouble free operation, safety & low Power Consumption. DCPL Column have been known for its efficiency & long life. There are plants working trouble free for more than thirty years in various parts of the Globe. Rotary Air Compressor Process Skid Air Separation Column

3 Dimensional view of Oxygen Nitrogen Plant with Cylinder filling station MEDICAL CYLINDER FILLING STATION AIR SEPARATION UNIT PROCESS SKID LIQUID OXYGEN PUMP OIL FREE CRYOGENIC EXPANDER ROTARY AIR COMPRESSOR (MEDICAL AIR)

Layout plan of an installated oxygen nitrogen plant CYLINDER FILLING STATION PROCESS SKID LIQUID OXYGEN PUMP OIL FREE AIR SEPARATION UNIT ROTARY AIR COMPRESSOR (MEDICAL AIR) CRYOGENIC EXPANDER Delhi Cryogenic Products Pvt.Ltd Tel:-91-124-6519870 E-mail:-info@dcploxygen.com Website:-www.dcploxygen.com