PARTS MANUAL FREEDOM DESIGNS, INC.

PARTS MANUAL 22 N. Madera Rd. Simi Valley, CA 05 (00) -55 www.freedomdesigns.com FAX () 52-50 020

Terms & Conditions Dealer Accounts & Terms A Freedom Designs, Inc. dealer application must be completed and approved before an account can be established. Freedom Designs standard terms for open accounts are net 0 days, unless other terms are agreed upon. Completed orders will not be shipped and new orders will not be processed on accounts with outstanding balances over 0 days. Ordering Orders may be placed over the telephone, faxed, mailed or e-mailed into the Customer Service Department. Measurement forms are provided in the catalog to assist in ordering. Phone orders must be followed up with a hard copy confirming P.O. For any questions, please call Customer Service. Published Prices Prices are subject to change without prior notice. Price Quotes If requested, customer service will provide a written quote on products. Written quotes will be valid for 0 days. Shipping All Freedom Designs, Inc. products are shipped ground, FOB Simi Valley. Freight charges on factory installs may apply on wheelchairs not manufactured by Freedom Designs, Inc. For requests of special handling or exceptional freight, up-charges will be billed. Returns All returns must have a Return Authorization Number on the box and must be shipped freight pre-paid. Product received without a valid R.A. # will be refused. The R.A. # must be obtained from the Customer Service Department. All returns MUST be received in the factory within 5 days of issuance of the R.A. #. Returns are subject to examination at the discretion of Freedom Designs, Inc. Returns may be subject to a 25% restocking fee. Custom fabricated products may not be returned. Cancellations Prior to canceling an order, a valid cancellation number must be obtained from Freedom Designs Customer Service Department. Restocking charges will occur on orders in progress and will be assessed based on the stage of completion. Custom fabricated products will be charged at 0%. Errors & Omissions All Freedom Designs products are quality controlled prior to shipping. However, should there be a problem, it must be reported to Customer Service within three weeks of receipt of order for resolution. Liability Freedom Designs, Inc. is not responsible for any product used incorrectly or with the wrong application. We recommend that positioning products be used in conjunction with a team of professionals that have been involved with the evaluation of the client. Freedom Designs, Inc. is responsible for any product that is defective in manufacturing or that was made in error by Freedom Designs, Inc. Warranty Hardware Lifetime Warranty (U.S.A.) Hardware 2 Year Warranty (International) Foam, wood and workmanship year (U.S.A. & International) Any product found to be defective due to the material or workmanship within one year, will be replaced under our return policy, once Freedom Designs, Inc. has evaluated the product. This replacement warranty does not include misuse of the product. For further information please contact our Customer Service Dept. at 00-- 55. Hours of Business Customer Service: Message Center: FAX Line: Monday through Friday :00 a.m. to 5:00 p.m. PST Available when factory is closed Available 2 hours a day, days a week 22 Madera Rd. Simi Valley, CA. 05 00--55 Fax -52-50 www.freedomdesigns.com

TABLE OF CONTENTS Accessories. 2 Axles & Axle Components. Anti-Tip Levers. Armrests. 5- Flip Back & Locking. 5 Adjustable Height. Adjustable Height Pediatric. Backrests, Push Handles & Stroller Handles. Caster Components. - Caster Forks. Caster Components Mounting. Caster Wheels. Footrests, Footplates. 2- Composite. 2 Flip Up. Flip Up 0 Degree (discontinued). Flip Up 5 Degree (discontinued). 5 Footrests, Footboard Removable.. Frame Components. -2 Frame Assemblies Base. Frame Assembly Seat / Tilt, Std.. Frame Growth Kits. Frame Assembly Gas Spring, X-Wide.. 20 Frame Assemblies - Tilt. 2 Front Rigging. 22-25 Pop-Up Hangers. 22 Pop-Up Hangers (discontinued). 2 Pop-up Elevating Legrest. 2 Pop Up Elevating Legrest (discontinued) 25 Wheel Locks. 2-2 Hub Locks. 2 Wheel Locks & Accessories. 2 Wheel Assemblies & Options. 2 Warranty. 2

ACCESSORIES 2 Protects and Pads Chair Frame (Velcro Attachment) 5 FBP Back Pack ea. Canopy Fabric ea. 2 FMNP Medical Necessities Bag ea. Canopy Fabric/Visor ea. Seat Pan Fixed ea. Canopy Fabric/Visor, Frame & Clamps ea. 0 Seat Pan Quick Release ea 5 Canopy Frame/Clamps ea. Frame Pads pr. Canopy Hardware ea. 5 2 Canopy Fabric/Frame & Clamps ea. Canopy Frame ea.. 2

AXLE COMPONENTS 2 5 No. Part # Description Qty 005 Axle Plate ea. 2 00 Axle Plate Spacer ea. 200 Double Lock Axle Receiver ea. A Axle Spacer ea. 5 00 Quick Release Axle ea. 052 /-20 X 2-/ Flat Head Screw pr. 02 /-20 Nylon Lock Nut ea. 0 / Flat Washer ea. 02 /- Hex Jam Nut ea.

ANTI-TIP ASSEMBLIES Flip Up 5 2 2 2 000 Anti-Tip Assembly Complete pr. 5 00 Anti-Tip Lever Tube ea. 000-R Anti-Tip Assembly Complete, Right ea. 00 Anti-Tip Extension ea. 000-L Anti-Tip Assembly Complete, Left ea. 00 Dual Snap Button ea. 2 00 Anti-Tip Tube Assembly pr. 00A Roller ea. 00-R Anti-Tip Tube Assembly Right ea. 00 Tube Plug / ea. 00-L Anti-Tip Tube Assembly Left ea. 0 Screw / X -/ Button Head ea. 00 Anti-Tip Roller Assembly pr. 02 Screw / X 2 Hex Head ea. 00-R Anti-Tip Roller Assembly Right ea. 2 0 Lock Nut / Thin ea. 00-L Anti-Tip Roller Assembly Left ea. 0 Washer / Flat ea. 002 Anti-Tip Housing Assembly ea. 0 Washer / Flat Nylon ea.

ARMRESTS Flip Back 20 5 2 20 5 FLIP BACK 2 Full length pad () not available on long arms LOCKING FLIP BACK 2 2 Flip Back Armrest Assemblies pr. 5022 Foam Pad.5 ea. 2-R Flip Back Armrest Assy Rt. ea. 005 Plastic Saddle ea. 2-L Flip Back Armrest Assy Lt. ea. 00-R Adjustment Plate Right ea. 2-P Flip Back Armrest Assemblies pr. 00-L Adjustment Plate Left ea. 2-PR Flip Back Armrest Assy Rt. ea. 00 Adjustment Plates Right & Left pr. 2-PL Flip Back Armrest Assy Lt. ea. 000 Tube End Plug ea. 2 5 Locking Armrest Assemblies pr. 02 Screw / x /2 Hex Head ea. 5-R Locking Armrest Assy Rt. ea. 2 022 Screw / x / Hex Head ea. 5-L Locking Armrest Assy Lt. ea. 02 Screw / x 2 Hex Head ea. 5-P Locking Armrest Assemblies pr. 02 Screw / x 2 / Hex Head ea. 5-PR Locking Armrest Assy Rt. ea. 5 05 Screw / x 2 Flat Head ea. 5-PL Locking Armrest Assy Lt. ea. 02 Locknut / Nylon ea. 22 Flip Back Tube (no hardware) - ea. 0 Locknut / Thin Nylon ea. 22-P Flip Back Tube (no hardware) - ea. 0 Washer / Flat ea. 5 Locking Arm Tube Assembly ea. 05 Washer / Thin Flat ea. 5-P Locking Arm Tube Assembly ea. 20 0 Washer 5/ Flat ea. 5 02 Flip Back Armrest Barrel ea. 2 Desk Length Arm Pad.25 Long ea. 0 Mounting Plate ea. Full Length Arm Pad.5 Long ea. 502 Foam Pad.5 ea. 5

ARMREST Adjustable Height 2 2 5 2 2 2 20a/b 2 5 STANDARD SEAT WIDTH REQUIRES () INNER CLAMP (ITEM 5) AND USES -/ LONG MOUNTING SCREW (ITEM 20a) EXTENDED SEAT WIDTH REQUIRES (2) INNER CLAMPS AS SHOWN AND USES -/2 LONG MOUNTING SCREWS (ITEM 20b) 5-R T-Arm Assembly Complete, Right ea. -STD Front Tube Standard ea. 5-L T-Arm Assembly Complete, Left ea. -SH Front Tube Short ea. 5 T-Arm Assembly Comp., Rt & Lt pr. Panel ea. 2 5-R Lower T-Arm Assembly Right ea. 2 Receiver Tube Cap ea. 5-L Lower T-Arm Assembly Left ea. Height Adjust Post ea. 5 Lower T-Arm Assembly Rt & Lt pr. 0 Spacer Bushing ea. 5-R Upper T-Arm Assembly Right ea. 5 00 Spring ea. 5-L Upper T-Arm Assembly Left ea. Desk Style Arm Pad ea. 5 Upper T-Arm Assembly Rt & Lt pr. Full Length Arm Pad ea. 5 Receiver Socket ea. 0-2 X / Pan Head Screw ea. 5 0 Receiver Frame Clamp ea. 05-2 X / Button Head Screw ea. Receiver Tube ea. 00-2 X / Button Head Screw ea. Receiver Tube Clamp ea. 20a 020 /-20 X / Hex Head Screw ea. Frame Release Lever ea. 20b 02 /-20 X /2 Hex Head Screw ea. 5-R Height Release Assembly Right ea. 2 0-2 Nylon Lock Nut ea. 5-L Height Release Assembly Left ea. 22 0 / Flat Washer ea.

ARMREST Adjustable Height, Pediatric 2 2 25 22 2 2 2 5 2 5 25 20 2 STANDARD SEAT WIDTH REQUIRES () INNER CLAMP (ITEM 5) AND USES -/ LONG MOUNTING SCREW (ITEM 2a) EXTENDED SEAT WIDTH REQUIRES (2) INNER CLAMPS AS SHOWN AND USES -/2 LONG MOUNTING SCREWS (ITEM 2b) 0-R T-Arm Assembly, Ped. Complete Rt. ea. -P Front Tube Pediatric ea. 0-L T-Arm Assembly, Ped. Complete Lt. ea. 2 Panel ea. 0 T-Arm Assemblies, Ped. Cmplt. R & L pr. Receiver Tube Cap ea. 2 -R Lower T-Arm Assembly, Ped. Rt. ea. -P Height Adjust Post ea. -L Lower T-Arm Assembly, Ped. Lt. ea. 5 Spacer Tube ea. Lower T-Arm Assemblies, Ped. R & L pr. 0 Tube Plug / ea. 2-R Upper T-Arm Assembly, Ped. Right ea. 0 Spacer Bushing ea. 2-L Upper T-Arm Assembly, Ped. Left ea. 00 Spring ea. 2 Upper T-Arm Assemblies, Ped. R & L pr. Desk Style Arm Pad ea. 5 Receiver Socket ea. 20 2 Screw -2 x Button Head ea. 5 0 Receiver Frame Clamp ea. 2 0 Screw -2 x / Phillips Pan Head ea. -P Receiver Tube ea. 22 05 Screw -2 x / Button Head ea. Receiver Tube Clamp ea. 2 00 Screw -2 x / Button Head ea. Frame Release Lever ea. 2a 020 Screw /-20 x / Hex Head ea. 5-R Height Release Assembly Right ea. 2b 02 Screw /-20 x /2 Hex Head ea. 5-L Height Release Assembly Left ea. 25 0 Locknut -2 Nylon ea. 5 Height Release Assemblies Rt. & Lt. pr. 2 0 Washer / Flat ea.

BACK CANES & STROLLER HANDLES a 2 5 5 2 2 22 2 2 2 22 22 20 2 5 2 *To order One Piece and Push Button Adjustable Stroller Handles (item numbers & ), please specify width after part number e.g. 25-2 is 2 wide. Backpost Short pr. 22 Adapter Tube ea. Backpost Medium pr. 2 Stroller Handle ea. 2 Backpost Tall pr. *2 Pc. Push Handle Extension. Q. R. ea. a 20 Backpost, Ergo Short pr. 2 *25 Push Button Adj. Stroller Handle ea. 20 Backpost, Ergo Medium pr. Foam Grip ea. 205 Backpost, Ergo, Tall pr. 000 Tube End Plug ea. 2 050-N Rigidizing Assembly Narrow ea. 5 005 Saddle for 5/ Screw ea. 050-M Rigidizing Assembly Medium ea. 0 Bumper Plug ea. 050-W Rigidizing Assembly Wide ea. 0 /-20 X -/ Button Head Screw ea. 05-N Rigidizing Center Tube Narrow ea. 05 /-20 X -/2 Button Head Screw ea. 05-M Rigidizing Center Tube - Medium ea. 2 /-20 X / Hex Head Screw ea. 05-W Rigidizing Center Tube Wide ea. 20 022 /-20 X -/ Hex Head Screw ea. 052-R Backpost Receiver Right ea. 2 0 5/- X 2-/ Hex Head Screw ea. 052-L Backpost Receiver Left ea. 22 0 /-20 Thin Nylon Lock Nut ea. 5 05 Backpost Clamp ea. 2 0 5/- Nylon Lock Nut ea. 05 Rigidizer Side Tube ea. 2 0 / Flat Washer ea. Rigidizing Backrest Bar Mount Fitting ea. 25 00 5/ Flat Washer ea. 20 Stroller Handle Assembly ea. 2 /-20 X / Set Screw ea. 22

CASTER COMPONENTS Forks 2 5 2 2 00- Caster Fork Assembly ea. 20C Caster Fork ea. 00-2 Caster Fork Assembly pr. 20A 5, & Caster Fork ea. 2 052- Caster Fork Assembly ea. 20 Caster Spacer ea. 052-2 Caster Fork Assembly pr. 02 5/- X 2 /2 Hex Head Screw ea. 0-5, & Caster Fork Assembly ea. 0 5/- Thin Nylon Lock Nut ea. 0-2 5, & Caster Fork Assembly pr. 0 /2 Flat Washer ea. 20A -5/ Caster Stem ea. 2 05 /2-20 Thin Nylon Lock Nut ea. 20B Caster Stem ea. 0 /2 Hex Jam Nut ea. 5 20 Caster Fork ea.

CASTER COMPONENTS Mounting 2 2 No. PART # DESCRIPTION QTY 20 Cap Caster Barrel ea. 2 200 Bearing ea. 05 /2-20 Thin Nylon Lock Nut ea. 20A -5/ Caster Stem ea.

CASTER COMPONENTS Wheels & Bearings 2 5 2 - Micro Light Up Caster ea. -2 x Poly Casters pr. -2 Micro Light Up Casters pr. 50- x.5 Poly Caster ea. 2 2- Micro Caster ea. 50-2 x.5 Poly Casters pr. 2-2 Micro Caster pr. 5- x 2 Poly Caster ea. 52- Micro Caster ea. 5-2 x 2 Poly Casters pr. 52-2 Micro Casters pr. 5- x Pneumatic Caster ea. 5- Micro Light Up Caster ea. 5-2 x Pneumatic Casters pr 5-2 Micro Light Up Casters pr. - x Poly Caster ea. 5-5 x Poly Caster ea. -2 x Poly Casters pr. -2 5 x Poly Casters pr. 2 - x.5 Caster ea. - 5 x.5 Poly Caster ea. -2 x.5 Casters pr. -2 5 x.5 Poly Casters pr. 200A Caster Wheel Bearing ea. - x Poly Caster ea.

FOOTRESTS Composite Flip-up Footplate This footplate is only for use with hangers or elevating legrest shown on pages 22 & 2. 5 2 5 200 Footplate Assemblies 2- pr. 2005-L Footplate 2-, Left ea. 200-R Footplate Assembly 2-, Right ea. 200-R Footplate -5, Right ea. 200-L Footplate Assembly 2-, Left pr. 200-L Footplate -5, Left ea. 2002 Footplate Assemblies -5 pr. 200-R Footplate -, Right ea. 2002-R Footplate Assembly -5, Right ea. 200-L Footplate -, Left ea. 2002-L Footplate Assembly -5, Left ea. 200-R Footplate, Right ea. 200 Footplate Assemblies - pr. 200-L Footplate, Left ea. 200-R Footplate Assembly -, Right ea. EED Heel Loops pr. 200-L Footplate Assembly -, Left ea. Heel Loop Mount Stud ea. 200 Footplate Assemblies pr. 5 Heel Loop Mount Screw ea. 200-R Footplate Assembly, Right ea. 0 Screw / x / Socket Head ea. 200-L Footplate Assembly, Left ea. 02 Locknut / Nylon ea. 2 2005-R Footplate 2-, Right ea. 2

FOOTRESTS Flip Up Footplate This footplate hinge is only for use with hangers or elevating legrest shown on pages 22 & 2. 5a 5 2 2 2 20050 Flip Up Footplate Assy, - pr. 2005-L Pivot Arm Assembly Left ea. 20050-R Flip Up Footplate Assy, -, Rt. ea. 2005-R Pivot Arm Right ea. 20050-L Flip Up Footplate Assy, -, Lt. ea. 2005-L Pivot Arm Left ea. 2000 Flip Up Footplate Assy, 2- pr. 200 Footplate Swivel Clamp ea. 2000-R Flip Up Footplate Assy, 2-, Rt. ea. 5 200 Hanger Spacer ea. 2000-L Flip Up Footplate Assy, 2-, Lt. ea. 5a 200 Hanger Spacer Extended ea. 200 Flip Up Footplate Assy, -5 pr. 2000 Footplate Flip Up Angle Adj., - ea. 200-R Flip Up Footplate Assy, -5, Rt. ea. 200 Footplate Flip Up Angle Adj., 2- ea. 200-L Flip Up Footplate Assy, -5, Lt. ea. 2002 Footplate Flip Up Angle Adj., -5 ea. 2002 Flip Up Footplate Assy, - pr. 200 Footplate Flip Up Angle Adj., - ea. 2002-R Flip Up Footplate Assy, -, Rt. ea. 200 Footplate Flip Up Angle Adj., ea. 2002-L Flip Up Footplate Assy, -, Lt. ea. 200 Footplate Pivot Spacer ea. 200 Flip Up Footplate Assy, pr. 0 Screw /-20 x 2 Button Head ea. 200-R Flip Up Footplate Assy,, Rt. ea. 05 Screw /-20 x 5/ Flat Head ea. 200-L Flip Up Footplate Assy,, Lt. ea. Screw /-20 x 5/ Socket Head ea. 2 2005 Pivot Arm Assemblies pr. 02 Locknut /-20 Nylon ea. 2005-R Pivot Arm Assembly Right ea. 2 0 Washer / Flat ea.

FOOTRESTS 0 Flip Up Footplate (discontinued) 5 2 Must be used with footrest hangers or elevating legrests shown on pages 2 & 25. 2 0 Flip Up Footplate Assy, 0, - pr. 0 Footplate Flip Up Angle Adj., - ea. 0-R Flip Up Footplate Assy, 0, -, Rt. ea. 020 Footplate Flip Up Angle Adj., 2- ea. 0-L Flip Up Footplate Assy, 0, -, Lt. ea. 02 Footplate Flip Up Angle Adj., -5 ea. 02 Flip Up Footplate Assy, 0, 2- pr. 022 Footplate Flip Up Angle Adj., - ea. 02-R Flip Up Footplate Assy, 0, 2-, Rt. ea. 02 Footplate Flip Up Angle Adj., ea. 02-L Flip Up Footplate Assy, 0, 2-, Lt. ea. 5 0 Footplate Hinge Assembly 0 ea. 0 Flip Up Footplate Assy, 0, -5 pr. 0-2 Footplate Hinge Assemblies 0 pr. 0-R Flip Up Footplate Assy, 0, -5, Rt. ea. 05 Mount Plate 0 ea. 0-L Flip Up Footplate Assy, 0, -5, Lt. ea. 0 Washer / Flat Nylon ea. 0 Flip Up Footplate Assy, 0, - pr. 020 Screw / x / Hex Head ea. 0-R Flip Up Footplate Assy, 0, -, Rt. ea. 0 Screw / x / Button Head ea. 0-L Flip Up Footplate Assy, 0, -, Lt. ea. 0 Screw / x /2 Flat Head ea. 05 Flip Up Footplate Assy, 0, pr. 02 Locknut / Nylon ea. 05-R Flip Up Footplate Assy, 0,, Rt. ea. 2 0 Locknut / Thin Nylon ea. 05-L Flip Up Footplate Assy, 0,, Lt. ea. 0 Washer / Flat ea. 2 0 Footplate Flip Arm ea. 05 Washer / Thin Flat ea. 0 Footplate Swivel Clamp ea.

FOOTRESTS 5 Flip Up Footplates (discontinued) 5 2 Must be used with footrest hangers shown on pages 2. 2 0 Flip Up Footplate Assy, 5, - pr. 0 Footplate Flip Up Angle Adj., - ea. 0-R Flip Up Footplate Assy, 5, -, Rt. ea. 020 Footplate Flip Up Angle Adj., 2- ea. 0-L Flip Up Footplate Assy, 5, -, Lt. ea. 02 Footplate Flip Up Angle Adj., -5 ea. 0 Flip Up Footplate Assy, 5, 2- pr. 022 Footplate Flip Up Angle Adj., -5 ea. 0-R Flip Up Footplate Assy, 5, 2-, Rt. ea. 02 Footplate Flip Up Angle Adj., ea. 0-L Flip Up Footplate Assy, 5, 2-, Lt. ea. 5 02-R Footplate Hinge Assembly 5 Right ea. 0 Flip Up Footplate Assy, 5, -5 pr. 02-L Footplate Hinge Assembly 5 Left ea. 0-R Flip Up Footplate Assy, 5, -5, Rt. ea. 0-R Mount Plate 5 Right ea. 0-L Flip Up Footplate Assy, 5, -5, Lt. ea. 0-L Mount Plate 5 Left ea. 0 Flip Up Footplate Assy, 5, - pr. 0 Washer / Flat Nylon ea. 0-R Flip Up Footplate Assy, 5, -, Rt. ea. 020 Screw / x / Hex Head ea. 0-L Flip Up Footplate Assy, 5, -, Lt. ea. 0 Screw / x / Button Head ea. 00 Flip Up Footplate Assy, 5, pr. 0 Screw / x /2 Flat Head ea. 00-R Flip Up Footplate Assy, 5,, Rt. ea. 02 Locknut / Nylon ea. 00-L Flip Up Footplate Assy, 5,, Lt. ea. 2 0 Locknut / Thin Nylon ea. 2 0 Footplate Flip Arm ea. 0 Washer / Flat ea. 0 Footplate Swivel Clamp ea. 05 Washer / Thin Flat ea. 5

FOOTRESTS Removable Footboard 5 2 5 5 5 2 200 Removable Footboard Assy, - ea. 0 Spacer Tube, 2 ea. 20 Removable Footboard Assy, 2- ea. 0 Spacer Tube, 5 ea. 202 Removable Footboard Assy, -5 ea. 05 Spacer Tube, ea. 20 Removable Footboard Assy, - ea. 0 Spacer Tube, ea. 20 Removable Footboard Assy, ea. 5 02 Footboard Clamp ea. 2 Hardware Assembly, ea. 02 Clamp Plate ea. Hardware Assembly, 2 ea. 02 Receiver Assembly ea. Hardware Assembly, 5 ea. 02 Frame Clamp ea. 0 Hardware Assembly, ea. 025 Locking Insert ea. Hardware Assembly, ea. 02 Adjustment Tube ea. 20 Removable Footboard, ea. 0 Tube Plug / ea. 20 Removable Footboard, 2 ea. 2 02 Screw / x 2 Hex Head ea. 20 Removable Footboard, 5 ea. 0 Screw / x / Button Head ea. 200 Removable Footboard, ea. 050 Screw / x / Flat Head ea. 20 Removable Footboard, ea. 5 02 Locknut / Nylon ea. 02 Spacer Tube, ea. 0 Washer / Flat ea.

BASE FRAME Standard & X-Wide 2 2 5 5 2 5 00-RS Side Frame Right, Short ea. 0 Bearing Spacer Tube ea. 00-RL Side Frame Right, Long ea. 05A Plastic Guide Bottom Outer ea. 2 00-LS Side Frame Left, Short ea. 05B Plastic Guide Bottom Side ea. 00-LL Side Frame Left, Long ea. 05C Plastic Guide Top Side ea. 0-F Base Tilt Bracket Front ea. 200 Bearing ea. 0-FX Base Tilt Bracket Front, X-Wide ea. 2 0 / Fender Washer ea. 0-R Base Tilt Bracket Rear ea. 0 Tube End Cap -/ ea. 0-RX Base Tilt Bracket Rear, X-Wide ea. 0 /-20 X /2 Button Head Screw ea. 5 02 Base Cross Bar Rear ea. 5 0 /-20 X -/ Button Head Screw ea. 02X Base Cross Bar Rear, X-Wide ea. 0 / Flat Washer ea. 0 Mounting Pin ea. 0 /2 Flat Washer ea. 0X Mounting Pin, X-Wide ea. 0A Set Screw /-20 x / ea.

SEAT / TILT FRAME Standard & X-Wide 5 20 2 20 5 2 5 20 2 20 20 5 20 00-S Tilt Frame Assembly Short ea. Seat Insert ea. 00-L Tilt Frame Assembly Long ea. 0 Pop-Up Plug ea. 00-X Tilt Frame Assembly X-Wide ea. 0 Pop-Up Spring 5 Degree Hanger ea. 2 0-S Seat Frame Assembly Right, Short ea. 0 Pop-Up Spring 0 Degree Hanger ea. 0-M Seat Frame Assembly Right, Med. ea. 0 Hanger Release Lever ea. 0-L Seat Frame Assembly Right, Long ea. 2 0 Binding Screw Female ea. 0-X Seat Frame Assembly Rt, X-Wide ea. Binding Screw Male ea. 02-S Seat Frame Assembly Left, Short ea. 000 Tube Plug ea. 02-M Seat Frame Assembly Left, Medium ea. 5 0 /-20 X -/ Button Head Screw ea. 02-L Seat Frame Assembly Left, Long ea. 05 /-20 X -/2 Button Head Screw ea. 02-X Seat Frame Assembly Left, X-Wide ea. 0 /-20 X -/ Button Head Screw ea. 00 2 Seat Extension pr. 02 /-20 Nylon Lock Nut ea. 5 05 Hanger Support Pop-Up ea. 0 /-20 Nylon Lock Nut Thin ea. Hanger Latch ea. 20 0 / Flat Washer ea. 2 Latch Spring ea. 2 0 / Nylon Flat Washer ea.

GROWTH KITS Medium Growth Kit Short Frame ( - Wide / - Deep) to Medium Frame (2 - Wide / 2 - Deep) Part No. Description Qty. 00-M MEDIUM GROWTH KIT ea. MEDIUM GROWTH KIT INCLUDES THE FOLLOWING: RIGHT AND LEFT MEDIUM SEAT FRAMES (#0-M & 02-M) EA. RIGHT AND LEFT LONG BASE FRAMES (#00-RL & 00-LL) EA. LONG TILT FRAME (#00-L) EA. BACK RIGIDIZING CENTER TUBE MEDIUM (#05-M) EA. Long Growth Kit Medium Frame (2 - Wide / 2 - Deep) to Long Frame ( - Wide / - Deep) Part No. Description Qty. 00-L LONG GROWTH KIT ea. LONG GROWTH KIT INCLUDES THE FOLLOWING: RIGHT AND LEFT LONG SEAT FRAMES (#0-L & 02-L) EA. BACK RIGIDIZING CENTER TUBE WIDE (#05-W) EA.

GAS SPRING COMPONENTS - X-Wide 5 2 2 0 Gas Spring ea. 0 Binding Screw Female ea. 2 0 Mount Bar Gas Spring ea. Binding Screw Male ea. 05 Mount Tube Gas Spring ea. 02 /-20 X -/ Socket Head Screw ea. 0 Spring Seat Gas Spring ea. 0 / x -/ Button Head Screw ea. 5 0 Collar Clamp Spring ea. 0 / Flat Washer ea. 0 Spring ea. 2 0 Washer / Nylon ea. 20

TILT ASSEMBLY Standard & X-Wide 5 2 5 2 5 2 0 Tilt Arm Standard ea. 00 Nylon Bearing ea. 0W Tilt Arm X-Wide ea. 0 Pedal Pad ea. 2 00 Tilt Lock Barrel Housing ea. 0 Tilt Spring ea. 0 Tilt Lock Barrel ea. 0 /-20 X Button Head Screw ea. 02 Tilt Lock Arm Standard ea. 2 0 /-20 X -/ Button Head Screw ea. 02W Tilt Lock Arm X-Wide ea. 0B 5/- X -/ Hex Head Screw ea. 5 0 Pedal Plate ea. 0 5/- Nylon Lock Nut Thin ea. 05 End Cap Tilt Arm ea. 5 0 / Flat Washer ea. 0 Spacer Bushing ea. 00 5/ Flat Washer ea. 2

HANGERS Pop Up from serial number CGX-50 2 5 These hangers require footplate assemblies shown on pages 2 &. 200- Pop Up Hanger Assembly 0 ea. 200- Pop Up Hanger Support Tube 0 ea. 200 Pop Up Hanger Assembly 0 pr. 5 200- Pop Up Hanger Support Tube 5 ea. 2 200- Pop Up Hanger Assembly 5 ea. 0 Pivot Fitting ea. 200 Pop Up Hanger Assembly 5 pr. 5 Alignment Guide ea. 2002-2002-2 200-200-2 Hanger Extension Assembly 0.5.5 Long Hanger Extension Assembly 0.5.5 Long Hanger Extension Assembly 2.5.5 Long Hanger Extension Assembly 2.5.5 Long ea. Locking Insert ea. pr. 000 Tube Plug ea. ea. 0 Screw / x / Button Head ea. pr. 0 Screw / x / Flat Head ea. 22

HANGERS Pop Up (discontinued ) - up to serial number CGX-50 2 5 These hangers require footplate assemblies shown on pages & 5. Hanger Assembly 0 pr. 5 0 Hanger Support Tube 5 ea. 2 0 Hanger Assembly 5 pr. 0 Pivot Fitting ea. 02-02-2 02- Hanger Extension Assembly 0.5.5 Long Hanger Extension Assembly 0.5.5 Long Hanger Extension Assembly 2.5.5 Long ea. 5 Alignment Guide ea. pr. Locking Insert ea. ea. 000 Tube Plug ea. 02-2 Hanger Extension Assembly 2.5.5 Long pr. 0 Screw / x / Button Head ea. 0 Hanger Support Tube 0 ea. 0 Screw / x / Flat Head ea. 2

HANGERS Pop Up Elevating Legrest 2 2 5 This legrest must be used with new flip up footplate assembly (see pages 2 & ) 2 2 2 5 5 20 22 2 -L ELR Assy w/o Pad & Footplate, Left ea. Calf Pad Angle Stop ea. -R ELR Assy w/o Pad & Footplate, Right ea. 2 Pivot Insert ea. ELR Assy w/o Pads & Footplates, Pair pr. Pivot Insert Bushing ea. -L ELR Assy w/ Pad, w/o Footplate, Left ea. 2 20 Calf Pad Mount Plate ea. -R ELR Assy w/ Pad, w/o Footplate, Right ea. 2- Calf Pad ea. ELR Assy w/ Pads, w/o Footplates, Pair pr. 2 Calf Pad pr. 2-L ELR Assy w/ Pad & Footplate, Left ea. 0 Screw /-20 X / Button Head ea. 2-R ELR Assy w/ Pad & Footplate, Right ea. 5 0 Screw /-20 X / Button Head ea. 2 ELR Assy w/ Pads & Footplates, Pair pr. 05 Screw /-20 X /2 Button Head ea. 2 2- Hanger Weldment, Pop Up ea. 0 Screw /-20 X 5/ Button Head ea. 2-2 Hanger Weldment, Pop Up pr. 0 Screw / x / Flat Head ea. Length Adjustment Tube ea. 0 Locknut /-20, Thin ea. 0-R Locking Mechanism Right ea. 20 0 Washer / Flat ea. 0-L Locking Mechanism Left ea. 2 05 Washer / Flat, Thin ea. 5 5 Alignment Guide ea. 22 Screw 5/- X 2 / Flat Head ea. 0 Pivot Fitting Pop Up Style ea. 2 0 Locknut 5/-, Thin ea. Locking Insert ea. 2 00 Washer 5/ Flat ea. Pad Mount Hook ea. 2

HANGERS Pop Up Elevating Legrest (discontinued as of //0) 5 2 22 These elevating legrests require footplate assemblies shown on page. 2 5 20 5 22 25 2 2 2 -L ELR Assy w/o Pad & Footplate, Left ea. 205 Angle Lock Lever ea. -R ELR Assy w/o Pad & Footplate, Right ea. 20 Calf Pad Flip Hinge ea. ELR Assy w/o Pads & Footplates, Pair pr. 20 Calf Pad Angle Stop ea. -L ELR Assy w/ Pad, w/o Footplate, Left ea. 2 20 Spacer Bushing ea. -R ELR Assy w/ Pad, w/o Footplate, Right ea. 20 Calf Pad Mount Plate ea. ELR Assy w/ Pads, w/o Footplates, Pair pr. 2- Calf Pad ea. -L ELR Assy w/ Pad & Footplate, Left ea. 2 Calf Pad pr. -R ELR Assy w/ Pad & Footplate, Right ea. 5 000 Tube Plug ea. ELR Assy w/ Pads & Footplates, Pair pr. 0 Screw /-20 X / Button Head ea. 2 -R Hanger Weldment, Pop Up Right ea. 0 Screw /-20 X Button Head ea. -L Hanger Weldment, Pop Up Left ea. 0 Screw /-20 X / Button Head ea. 20 Elevating Hinge ea. 05 Screw /-20 X /2 Button Head ea. 202-R Length Adjustment Tube Right ea. 20 0 Screw -2 x 5/ Flat Head ea. 202-L Length Adjustment Tube Left ea. 2 05 Screw -2 X / Button Head ea. 5 5 Alignment Guide ea. 22 02 Washer / Nylon ea. 0 Pivot Fitting Pop Up Style ea. 2 0 Locknut /-20, Thin ea. 20 Ratchet Guard ea. 2 00 Washer 5/ Flat ea. 20 Ratchet Gear ea. 25 0 Screw 5/- X 2 / Hex Head ea. 25

WHEEL LOCK Hub Lock 2 2 Assemblies consist of items: (2) - hub lock actuator assemblies & () - lever / clamp assemblies 5 055 Hub Lock Assy Complete Short Cables pr. 5 00-R Actuator Assembly Right ea. 05 Hub Lock Assy Complete Long Cables pr. 00-L Actuator Assembly Left ea. 055-R Hub Lock Assy Complete Short Cables, Rt ea. 00 Hub Lock Actuator Assemblies pr. 055-L Hub Lock Assy Complete Short Cables, Lt ea. 02- Inner Clamp ea. 05-R Hub Lock Assy Complete Long Cables, Rt ea. 05- Adapter Plate ea. 05-L Hub Lock Assy Complete Long Cables, Lt ea. 05-2 Adapter Plates pr. 2 0-R Lever / Clamp Assembly Right ea. 05 Adapter Plates pr. 0-L Lever / Clamp Assembly Left ea. 0- Cable Short ea. 0 Lever / Clamp Assemblies pr. 0 Cables Short pr. 0-R Hub Lock Actuator Right with Short Cables ea. 0- Cable Long ea. 0-L Hub Lock Actuator Left with Short Cables ea. 0 Cables Long pr. 0 Hub Lock Actuator with Short Cables pr. See Notes Wheel Assembly ea. 00-R Hub Lock Actuator Right with Long Cables ea. 00A Screw /-20 X / Socket Head ea. 00-L Hub Lock Actuator Left with Long Cables ea. 0 Screw /-20 X Socket Head ea. 00 Hub Lock Actuator with Long Cables pr. 2 02 Screw /-20 X / Socket Head ea. 0-R Lever Right, w/o Cable ea. 052 Screw /-20 X 2-/ Flat Head ea. 0-L Lever Left, w/o Cable ea. 0 Levers, w/o Cables pr. 2

WHEEL LOCKS Lever Style & Accessories 2 5 500 Push to Lock Wheel Lock Right (no clamp) ea. 502-L Push to Lock Lever Assembly Left ea. 5005 Push to Lock Wheel Lock Left (no clamp) ea. 502 Push to Lock Lever Assemblies pr. 2 0-R Push to Lock Wheel Lock / Clamp Right ea. 5025-R Pull to Lock Lever Assembly Right ea. 0-L Push to Lock Wheel Lock / Clamp Left ea. 5025-L Pull to Lock Lever Assembly Left ea. 0 Push to Lock Wheel Locks pr. 5025 Pull to Lock Lever Assemblies pr. 500 Pull to Lock Wheel Lock Right (no clamp) ea. 0 Wheel Lock Mounting Clamp ea. 500 Pull to Lock Wheel Lock Left (no clamp) ea. 50 Wheel Lock Swivel Arm Long ( ) ea. 02-R Pull to Lock Wheel Lock / Clamp Right ea. 0 Lock Extensions pr. 02-L Pull to Lock Wheel Lock / Clamp Left ea. 50B Cap for Wheel Lock Extension ea. 02 Pull to Lock Wheel Locks / Clamps pr. 50C Plastic Cap for Wheel Lock Handle ea. 5 502-R Push to Lock Lever Assembly Right ea. 2

WHEELS Mag Assemblies Mag Wheel 2, and Without Hub Lock Option Mag Wheel with Tire & Tube PART # DESCRIPTION QTY PART # DESCRIPTION QTY 022-2 Mag Wheel with Tire and Tube ea. 025- Mag Wheel with Tire and Tube ea. 02- Mag Wheel with Tire and Tube ea. Mag Wheel with Tire & Insert PART # DESCRIPTION QTY PART # DESCRIPTION QTY 000-2 Mag Wheel with Tire and Insert ea. 002- Mag Wheel with Tire and Insert ea. 00- Mag Wheel with Tire and Insert ea. With Hub Lock Option Mag Wheel with Tire, Tube & Hub Lock Adapter PART # DESCRIPTION QTY PART # DESCRIPTION QTY 2 2 Mag Wheels, Tires, Tubes & Hub Locks pr. 2 Mag Wheels, Tires, Tubes & Hub Locks pr. 22 Mag Wheels, Tires, Tubes & Hub Locks pr. Mag Wheel with Tire, Insert & Hub Lock Adapter PART # DESCRIPTION QTY PART # DESCRIPTION QTY 2 2 Mag Wheels, Tires, Inserts, & Hub Locks pr. 2 Mag Wheels, Tires, Inserts &Hub Lock s pr. 2 Mag Wheels, Tires, Inserts, & Hub Locks pr. Wheels Only Part No. Description Qty. 020 2 Mag Rim with Bearings ea. 02 Mag Rim with Bearings ea. 022 Mag Rim with Bearings ea. Inner Tubes Part No. Description Qty. 0 2 /2 X 2 / Inner Tube ea. 0 X / Inner Tube ea. 0 X / Inner Tube ea. Tires Part No. Description Qty. 02 2 /2 X 2 / Poly Tire ea. 02 2 /2 X 2 / Pneumatic Tire ea. 0 x / Pneumatic Tire ea. 02 X / Pneumatic Tire ea. Solid Tire Inserts Part No. Description Qty. 02 2 /2 X 2 / Solid Insert ea. 0 X / Solid Insert ea. 0 X / Solid Insert ea. Additional Components PART # DESCRIPTION QTY PART # DESCRIPTION QTY 200 / X /2 Bearings ea. 000 Hub Cap ea. 2

WARRANTY Freedom Designs, Inc. Limited Warranty PLEASE NOTE: THE WARRANTY BELOW HAS BEEN DRAFTED TO COMPLY WITH FEDERAL LAW APPLICABLE TO PRODUCTS MANUFACTURED AFTER JULY, 5. THIS WARRANTY IS EXTENDED ONLY TO THE ORIGINAL PURCHASER/USER WHO PURCHASES THIS PROD- UCT WHEN NEW AND UNUSED DIRECTLY FROM FREEDOM DESIGNS OR AN AUTHORIZED DEALER OR DISTRIBUTOR. THIS WARRANTY GIVES SPECIFIC LEGAL RIGHTS AND YOU MAY ALSO HAVE OTHER LEGAL RIGHTS WHICH VARY FROM STATE TO STATE. Limited Warranty USA: All Freedom Designs wheelchair frames, quick release axles and hardware are warranted against defects in material and workmanship for five (5) years from the date of purchase. All other manufactured and distributed parts and components (including frame components, seating components, axle plates, armrests and backrests) are warranted for one () year from said purchase date. There is no warranty for tires, tubes, and push handle grips. If within such warranty periods any product component eligible for coverage under this warranty shall be proven to be defective, Freedom Designs will, at its option, either replace or repair the product, or will supply the original purchaser with replacement parts. Freedom Designs sole obligation and your exclusive remedy under this warranty shall be limited to such repair and/or replacement of defective parts and shall not apply to problems arising form normal wear and tear or failure to adhere to the product instructions. This warranty does not include any labor or shipping charges incurred in replacement part installation or repair. Freedom Designs sole obligation and your exclusive remedy under this warranty shall be limited to such repair and/or replacement. Limited Warranty - International: All Freedom Designs wheelchair frames & quick release axles are warranted against defects in material and workmanship for five (5) years from the date of purchase. All other manufactured and distributed parts and components (including frame components, axle plates, armrests and backrests) are warranted for one () year from said purchase date. All hardware is warranted for two (2) years after the date of purchase to be free from defects and shall not apply to problems arising from normal wear and tear or failure to adhere to product instructions. There is no warranty for tires, tubes, and push handle grips. If within such warranty periods any product component eligible for coverage under this warranty shall be proven to be defective, Freedom Designs will, at its option, either replace or repair the product, or will supply the customer with replacement parts. Freedom Designs sole obligation and your exclusive remedy under this warranty shall be limited to such repair and/or replacement. This warranty does not include any labor or shipping charges incurred in replacement part installation or repair. Freedom Designs sole obligation and your exclusive remedy under this warranty shall be limited to such repair and/or replacement. Limitations & Exclusions USA & International: The foregoing limited warranties shall not apply to: Tires, tubes and push handle grips; Serial numbered products if the serial number has been removed or defaced; Products subjected to negligence, accident, improper operation, maintenance, or storage; Products modified without Freedom Designs express written consent including, but not limited to, modification through the use of unauthorized parts or attachments; Products damaged by reason of repairs made to any component without the specific consent of Freedom Designs, or to products damaged by circumstances beyond Freedom Designs control; Problems arising from normal wear or failure to adhere to these instructions; and with any such warranty eligibility evaluation to be solely determined by Freedom Designs;. THE FOREGOING LIMITED WARRANTIES ARE EXCLUSIVE AND IN LIEU OF ANY OTHER WARRANTIES WHATSOEVER, WHETHER EXPRESS OR IMPLIED, INCLUDING THE IMPLIED WARRANTIES OF MER- CHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, AND THE SOLE REMEDY FOR VIOLA- TIONS OF ANY WARRANTY WHATSOEVER SHALL BE LIMITED TO REPAIR OR REPLACEMENT OF THE DEFECTIVE PRODUCT PURSUANT TO THE TERMS CONTAINED HEREIN. THE APPLICATION OF ANY IMPLIED WARRANTY WHATSOEVER SHALL NOT EXTEND BEYOND THE DURATION OF THE EXPRESS WARRANTY PROVIDED HEREIN. FREEDOM DESIGNS SHALL NOT BE LIABLE FOR ANY CONSEQUEN- TIAL OR INCIDENTAL DAMAGES WHATSOEVER. THESE WARRANTIES SHALL BE EXTENDED TO COM- PLY WITH STATE PROVINCIAL LAWS AND REQUIREMENTS. Returns: An authorization for return must be acquired by an established Freedom Designs, Inc. dealer/distributor before Freedom Designs will accept returned items. The dealer must return items to Freedom Designs, 22 N. Madera Rd, Simi Valley, CA 05 USA with freight pre-paid and fully insured with the R.A. # issued by customer service marked on the outside of the box. All returns must be received within 5 days of issuance of the R.A. #. Returns are subject to examination at the discretion of Freedom Designs and may be subject to a 25% restocking fee. Custom fabricated products are non-returnable. 2

22 Madera Rd. Simi Valley, CA. 05 00--55 Fax -52-50 www.freedomdesigns.com