HEROSE NEWS CALL CLICK FOR EMAIL info@ WINTER 2015 / 2016 IN STOCK NOW! TAMPER PROOF DEVICE GENERANT SDC SERIES FOR DOT-4LC AND TC-4LM LIQUID CYLINDERS The connection system is supplied for installation into the outlet ports of most gas use, vent and fill valves on a cryogenic liquid cylinder. FEATURES AND BENEFITS Easily installs on most existing threaded cylinder valves using standard hex wrench NPT male connection supplied with factory applied PTFE thread sealant tape Suitable for both industrial and medical applications CGA connections manufactured to industry standards Zero external leakage Cleaned and packaged for oxygen service Optional integral anti-backflow check valve OEM endorsed The system is a one-piece assembly consisting of a CGA fitting/clutch mechanism permanently mounted in a stainless steel locking bracket. Once installed, this system cannot be removed without rendering the CGA outlet connection unusable. ENQUIRE NOW! ASK HEROSE Friendly help and advice from the Herose team AF OUR PROMISE > Safety first Extensive knowledge Great Service Global reach Fast delivery NEW! EXCLUSIVE STOCK SILENT OPENING LCV & POP ACTION CRV Compact inline valve for multiple applications CALL NOW! HEROSE LIMITED THE VALVE AND ANCILLARIES PEOPLE
NEW! EXCLUSIVE SUPPLIERS! CRYOGENIC INSULATION Long-Range Cryogenic Insulation and Ancillaries from ENHANCE YOUR INSTALLATION LONG-RANGE CRYOGENIC COMPOSITE INSULATION The paper is a non-outgassing, inorganic non-woven material manufactured from super fine glass fibre. KEY BENEFITS The Long-Range paper is thin and light. Its highly uniform structure ensures low thermal conductivity: Ex-Stock in Europe and beyond minimising your bulk purchases. Zero organic content with no outgassing. Enhanced lattice structure ensures fast pump-down time. Proven stability minimises waste and increases productivity. Suitable for all your equipment including oxygen vessels. Enhances installation efficiency and improves your bottom line. LOW THERMAL CONDUCTIVITY ZERO ORGANIC CONTENT FAST PUMP TIMES Cryogenic Vessels, Cryogenic Tanks, Microbulks, Dewars, Cryogenic Railcars, ISO Tanks, Vacuum Jacketed Pipe, etc. EX-STOCK IN EUROPE AND BEYOND QUICK LEAD TIMES 5x QUICKER INSTALL TIME* *COMPOSITE INSULATION LONG-RANGE CRYOGENIC COMPOSITE INSULATION High quality multi-layer composite option by rolling the aluminium foil together with the inorganic paper in combined layers from one to five pairs. KEY BENEFITS Ex-stock in Europe and beyond minimising your bulk purchases. The multi-layer, combined option strengthens the insulation materials. Drastically reduces the install time and increases your productivity. Reduces paper and foil waste. Suitable for all your equipment including oxygen vessels. Enhances installation efficiency and improves your bottom line. Cryogenic Vessels, Microbulk, Dewars, Cryogenic Railcars, ISO Tanks, Vacuum Jacketed Pipe, etc. SMALLER QUANTITIES AVAILABLE TO ORDER REDUCES INSTALLATION TIMES IMPROVES INSTALLATION STABILITY MINIMISES WASTE IN STOCK NOW MINIMISE BULK PURCHASES!
YOUR GUIDE TO CRYOGENIC INSULATION DOWNLOAD OUR INDUSTRY INSIGHTS AT HEROSE.CO.UK MAXIMUM THERMAL PROTECTION LONG-RANGE CRYOGENIC INSULATION BLANKET The Long-Range cryogenic insulation blanket is designed to meet the specific insulation needs of the cryogenic equipment manufacturers and their applications. KEY BENEFITS Gives maximum thermal protection with minimal weight. Easy to handle and cut into support struts and legs. Virtually no outgassing under vacuum pressures and cryogenic temperature conditions. Gives faster pump-down times. Makes your production processes more efficient and improves your bottom line. The Insulation Blanket is suitable for any application within the temperature range of -268 C to 232 C. EX-STOCK IN EUROPE AND BEYOND SIMPLIFIES INSTALLATIONS EASILY HANDLED MINIMAL OUTGASSING COMPETITIVE PRICING REQUIREMENTS FULFILLED! LONG-RANGE CRYOGENIC INSULATION ACCESSORIES We stock and supply the full range of cryogenic insulation accessory products for your full range of cryogenic equipment. ALUMINIUM FOIL Status 1235-0 Excellent reflection Low emissivity No outgassing ALUMINIUM FOIL TAPE Water solubility acrylic adhesive Flame resistant Good sealant Long serviceable life indoors and outdoors Excellent reflection of both heat and light FIBRE GLASS FABRIC Oxygen Compatible High strength Low thermal conductivity Low outgassing Meets the needs of fixing, protecting and finishing multi-layer insulation material wrapping FIBRE GLASS TAPE Oxygen compatible High strength Low thermal conductivity Low outgassing Meets the needs of fixing and finishing multi-layer insulation material wrapping CONTACT US TO ENSURE WE HAVE YOUR FULL REQUIREMENT HELD IN STOCK TO MEET YOUR DAILY NEEDS. ENHANCES INSTALLATION, IMPROVES YOUR BOTTOM LINE!
FOR BALL VALVES MECA-INOX PY4 ESD MECA-INOX PY4 CY Stainless steel extended spindle 3-piece cryogenic emergency shutdown valve complete with live loaded packing and pressure relief hole. Stainless steel extended stem 3-piece cryogenic ball valve complete with live loaded packing and pressure relief hole. Non extended available. Materials: Stainless Steel Body Sizes: 1 to 1½ Reduced bore Max allowable Pressure: 1 to 24bar 1 ½ to 16bar -196 to 190 C / -321 to 374 F Connections: Socket Weld, NPT, Butt Weld, BSPT, BSPP Sizes: 8 to 100mm / ¼ to 4 Max allowable Pressure: up to 1450psi / up to 100bar -196 to 190 degrees c/-320 to 375 F, (recommended minimum working temp for non extended -50 C) Body Material: Stainless Steel Connections: BSPP, BSPT, Butt Weld, NPT, Socket Weld QUICK DELIVERY IN STOCK QUICK DELIVERY OUTSTANDING VALUE MECA-INOX PY4 3 WAY MECA-INOX PS4 Stainless steel extended or non-extended stem 3-way cryogenic ball valve complete with live loaded packing. Sizes: 8 to 100mm / ¼ to 4 Max allowable Pressure: up to 1450psi / up to 100bar -196 to 190 C / -321 to 374 F Body Material: Stainless Steel Connections: BSPP, BSPT, Butt Weld, Socket Weld Design: T-port or L-port, Horizontal or vertical Stainless steel 3 piece ball valve, primarily sealed with thrust seal in PEEK reinforced PTFE. Sizes: 6 to 150mm / ¼ to 6 Max allowable Pressure: up to 1450psi / up to 100bar -40 to 190 C Body Material: Stainless Steel Connections: BSPP, BSPT, Butt Weld, NPT, Socket Weld FAST IN STOCK LEAD QUICK TIMES DELIVERY FULL IN STOCK INDUSTRIAL RANGE QUICK AVAILABLE DELIVERY No. 1 FOR NEXT DAY DELIVERY!
FOR SAFETY VALVES CALL CLICK EMAIL info@ HIGH TEMPERATURE & PRESSURE RANGE 06850 Stainless steel safety valve with metal to metal seat, approved for gases, vapours and fluids. Sizes: 15mm to 40mm / ½ to 1 1½ Pressure: 7.25psi to 3625psi /.5bar to 250bar -270 C to +400 C / -454 F to 752 F Body Material: Stainless Steel Seat Material: Metal to metal Connections: Connections: BSPP, NPT, flanged 06388 Bronze cryogenic safety valve with PTFE valve seal, approved for gases, vapours and liquefied gases. Sizes: 15 to 40mm / ½ to 1½ Pressures: 29 to 725psi / 2 to 50bar -196 to 185 C / -321 to 365 F Body Material: Bronze Seat Material: Carbon filled PTFE Connections: BSPP, BSPT, NPT IN STOCK QUICK DELIVERY AVAILABLE TO SHIP IN 48 HOURS HIGH CAPACITY AND FLANGED OPTION LESER 459 Stainless steel safety valve with metal to metal seat flanged options available. Sizes: 15 to 50mm / ½ to 2 Pressures: 1.5 to 12325psi /.2 to 850bar -200 to 400 C / -328 to 752 F Connections: Socket Weld, NPT, Butt Weld, BSPT, BSPP, DIN flange, ANSI flange Body material: 1.4104, 1.4404 Seat material: Metal to metal LOW COST AND UNBEATABLE DELIVERY 06217 Brass safety valve with FPM seal. Vent to atmosphere Sizes: 15 to 50mm / ½ to 2 Pressures: 3 to 363psi /.2 to 25bar -40 to 200 C / -40 to 392 F Body Materials: Brass Seat Material: FPM Connections: BSPP, Male Threaded BELLOW IN STOCK OPTION AVAILABLE QUICK DELIVERY FULL IN STOCK INDUSTRIAL RANGE QUICK AVAILABLE DELIVERY CALL
FOR PRESSURE CONTROL & MONITORING EQUIPMENT HIGH FLOW RATES WITH MINIMAL PRESSURE DROOP EFFECT GDR HIGH FLOW LIQUID CR GAS DELIVERY REGULATOR CRYOGENIC GAS DELIVERY REGULATOR Sizes: 6 to 25mm / ¼ to 1 Pressures: Max inlet pressure 37.9bar -60 to 190 C / -80 to 375 F Body Material: Brass Seat Material: EPDM, Viton Connections: BSPT & NPT Sizes: 10 to 15mm / 3/8 to ½ Pressures: Max inlet pressure 28bar -195 to 107 C / -320 to 225 F Body Material: Brass Seat Material: PTFE Connections: BSPP, NPT HIGH CV FOR VESSEL COMBI REGULATOR DESIGN SUITABLE FOR PILOT PRESSURE GENERANT PILOT CRYOGENIC COMBI PRESSURE REGULATOR, TYPE 4186 Sizes: 15 to 25mm / ½ to 1 Pressures: Max inlet pressure 38bar -196 to 120 C / -321 to 248 F Body Material: Brass, Stainless Steel Seat Material: PTFE Connections: Bullnose, BSPT PILOT PRESSURE REGULATOR, TYPE PR Size: 8mm / ¼ Maximum Inlet Pressure: 400 Psig (27.6 Bar) Temperature Range: -20 to 200 F (-30 to 95 C) Valve O-ring: EPDM / FKM OFFER INACCURACIES AS LOW AS 0.5% TYPE 109: DIFFERENTIAL PRESSURE GAUGE Materials: Carbon Steel, Stainless, Brass, Aluminium / Stainless Steel, Copper Alloy Sizes: 6 to 15mm / 3/8 to ½ -40 to 93 C / -40 to 200 F Connections: NPT DRY GAUGE DESIGN WITH NO INTERNAL LIQUID FILL TYPE 116: DIFFERENTIAL PRESSURE GAUGE Materials: Brass / Viton -40 to 93 C / -40 to 200 F Connections: NPT No. 1 FOR NEXT DAY DELIVERY!
FOR CYLINDER FILLING EQUIPMENT CALL CLICK EMAIL info@ EASY OPERATION UNDER PRESSURE GENERANT HIGH PRESSURE GAS CONTROL VALVE The Series MV High Pressure Gas Control Valve is optimized for the demanding requirements of Gas Cylinder Fill Plants, Manifold and Piping System applications. The High Pressure Oxygen Service Valve Configuration was third party tested as per ISO 7291 and ASTM G175 FEATURES AND BENEFITS Oxygen safe: copper valve confi guration third party tested as per ISO 7291 and ASTM G175 Low torque: needle thrust bearing maintains low operating torque throughout full pressure range High pressure: rated for high pressure fi ll plants, up to 380bar Flow control: unique valve geometry allows user to meter fl ow on initial opening and minimizes initial pressure surges Adaptable to existing installations: panel mount version supplied with two panel nuts for easy retro-fi tting to existing installations Long service life: optimized material and component selection for long service life; non-rotating poppet and non-rising stem maintain seat and seal integrity, needle thrust bearing effi ciently minimizes wear effects of mechanical load Fast opening: 2.5 turns from closed to full-open High fl ow: large orifi ces and internal fl ow paths for maximum fl ow effi ciency Field re-buildable: all seat / seal confi gurations fully fi eld re-buildable CONTACT US FOR FURTHER INFO HIGH OPERATING PRESSURE CVH SERIES NEW CHECK VALVE WITH HIGH OPERATING PRESSURE Sizes: ½ to ¾ Pressure: 0.5 to 450bar Temperature: -196 to +250 C Body material: Stainless steel or Monel Seat: Metal to metal, elastomer or plastic seat FAST LEAD TIMES! AVAILABLE IN STAINLESS STEEL OR MONEL SLKC8-14APDM FULL LIFT PRESSURE RELIEF VALVE Sizes: ½ to ¾ Pressure: 0.5 to 450bar Temperature: -196 to +250 C Body material: Stainless steel or Monel Seat: Metal to metal, elastomer or plastic seat TO FIND OUT MORE CALL US CALL
FOR VALVES & ANCILLARIES CALL CLICK EMAIL info@ FOR WE BRING YOU TOP QUALITY VALVES AND ANCILLARIES T F +44 (0) 1302 773 333 E sales@ 3 Lindley Road Finningley, Doncaster DN9 3DQ, UK Individual components or complete packages, backed up with in-depth industry know-how. MERRY CHRISTMAS FROM HEROSE LTD Despite our differences, we still work as a team Merry Christmas from Herose Ltd ASK HEROSE Friendly help and advice from the Herose team Call: Email: info@ Web: HEROSE LIMITED THE VALVE AND ANCILLARIES PEOPLE