Trasmitter ad Trasducer Selectio Guide Model DCT ACT SPT IND-100 742 89 831 88 375 575 SST SDT 675 1535 IPS-200 HPT-100 Model 40 Product Lie OEM Trasducers OEM Trasducers OEM Trasducers OEM Trasducers Military Trasducers Military Trasducers Idustrial Trasmitters Idustrial Trasmitters Submersible Level Submersible Level Submersible Level Submersible Level Submersible Level High Purity High Purity High Purity Peumatic Cotroller Features Excellet Stability, Temperature Measuremet Optio Versatility, Accuracy, Customizatio Amplified Output, 5X Burst Pressure Sputtered Metal Sesor, Field Adjustable Rugged Desig for Navy Ships, Differetial Pressure Optio Zero ad Spa Adjustmets All Stailess Steel, Explosio-proof Desig Field Termial Block, Adjustable Low-cost, Reliable Level Measuremet Reliable Level Measuremet 0.69 Diameter for Small Bore s OEM Level Trasducer With Optioal Temperature Output Shark Cage Desig With Large Diaphragm Ultra High Purity With Less Tha 10 Ra Fiish UHP Gauge/Switch Combiatio Hastelloy Diaphragm, Outdoor Use Pressure Cotroller for Process Variables Rages 0-1 thru 0-3000 psi 0-1 thru 0-3000 psi VAC-5000 psi 0-2 thru 0-350 bar 100-3000 psi VAC-10,000 psi, 0-600 psid VAC-10,000 psi, 0-400 psid 0-6 thru 0-5000 psi, 0-500 psid 0-3 thru 0-5000 psi 0-6 psig thru 0-300 psig 0-6 psig thru 0-300 psig 0-6 psig thru 0-150 psig 0-1 thru 0-300 psig 0-6 psig thru 0-60 psig VAC-4000 psi VAC-4000 psi VAC-3000 psi VAC-3000 psi Gauge X X X X X X X X X X X X X X X X X Vacuum X X X X X X X X Compoud X X X X X X X X X X Absolute X X X X X X X X Sealed X X X X Differetial X X X X Process Coectio 1/8, 1/4 NPT, 7/16-20 SAE 1/8, 1/4 NPT, 7/16-20 SAE 1/8 NPT 1/4 NPT, Block Mout optioal 7/16-20 Thread for 1/4 Tube 7/16-20 Thread for 1/4 Tube 1/4 NPT Male, 1/2 NPT Female ad Male 1/2 NPT Female, Flush 1/4 NPT Male Sub Nose 1/2 NPT Nylo Sub Nose 9/16-18 Delri Sub Nose 1/4 NPT Male Sub Nose 3.5 Diaphragm Protected by a 4.75 Cage Lower Mout or Ceter Back Mout, 1/4 NPT, MVCR, or MVCRF Lower Mout or Ceter Back Mout, 1/4 NPT, FVCR, MVCR, or MVCRF 1/4, 3/8, 1/2 ich Tube Stub or Face Seal Fittig. High Flow Face Seal Available. 1/4 NPT Female Wetted Parts, Brass, Brass ad Hastelloy C22 or Hastelloy C, Polyurethae, Vito, Polyurethae, Vito Polyurethae, Vito, 10 Ra Fiish, 10 Ra Fiish Hastelloy ad 316L SS, 7-10 Ra Fiish 316 SS, Broze, Ni Spa C Iput For mv Out Iput For Volt Out 9-30 VDC, 4.75-5.25 VDC Ratiometric 10 VDC 8-15 VDC 28 VDC ±4.5 VDC 8-14 VDC 9-30 VDC Iput For ma Out 11-30 VDC 12-30 VDC 28 VDC ±4.5 VDC 28 VDC ±4.5 VDC 12-30 VDC 12-40 VDC 11-30 VDC 12-40 VDC 11-30 VDC 11-30 VDC 12-40 VDC 12-30 VDC Output Millivolts (mv) Output Volts Output Milliamps (ma) Housig 1-5 VDC, 1-6 VDC, 0-5 VDC, 0.5-4.5 VDC Ratiometric 0-100 mv DC 1-6 VDC 0-5 VDC 1-5 VDC, 0.8-3.2 VDC 1-6 VDC, 1-5 VDC, 0.5-4.5 VDC, ad 0-5 VDC 10 watts DC, 12 VA AC Max 12-30 VDC 28 V AC/DC Max 0-5 VDC 4-20 ma 4-20 ma 4-20 ma 4-20 ma 4-20 ma 4-20 ma 4-20 ma 4-20 ma 4-20 ma 4-20 ma 4-20 ma 4-20 ma Alumium or ULTEM Alumium or ULTEM Calibratio Fixed Rage Fixed Rage Fixed Rage Accuracy Electrical Coectio Agecy Approvals ad Stadards Itrisically Safe Explosio Proof ±0.2% Full Cable, Di, Packard, Bedix, Coduit ±0.2% Full Cable, Di, Packard, Bedix, Coduit Packard Coector ad 18 #20 AWG Wire IP-64, Mil-STD- 202F 300 SS 316 SS, Alumium 316 SS 316 SS 316 SS 316 SS 316 SS 316 SS 316 SS 316 SS 300 SS Zero ad Spa Adjustmet 10 Shielded Cable Optioal Bedix or Optioal 1/2 NPT Coduit NEMA 4X, CE CSA/NTRL CL1 DIV 1 Zero ad Spa Adjustmet ±1.0% Full Mil-Spec Coectors w/ SS Optioal MIL-T-24742, MIL-STD-901D, MIL-STD-461, MIL- STD-167 Zero ad Spa Adjustmet ±1.0% Full Mil-Spec Coectors w/ SS Optioal MIL-D-24304B, MIL-P-24212C (SH) Fixed Rage ±0.30% Full Scale BFS 3/4 NPT Female Coduit Stadard Field Adjustable 5:1 Turdow 1/2 NPT Female Coduit Fixed Rage Bech Adjustable Fixed Rage Fixed Rage Bech Adjustable Bech Adjustable Bech Adjustable 22 Gauge Polyurethae Shielded Cable up to 2500 Feet 20 Gauge Polyurethae Shielded Cable Up to 3000 Feet Optioal 1/2 Coduit, Teflo Optioal Scale BFSL 22 Gauge Polyurethae Shielded Cable up to 5000 Feet ±0.20% Full Scale BFSL Polyurethae, Polyolefi, or Teflo Cable. EMI Protectio ad Coduit Adapter Optioal Scale BFSL 20 Gauge Polyurethae Shielded Cable Up to 3000 Feet Optioal 1/2 Coduit, Teflo Optioal ±1.0% of Spa ±2.0% of Spa 26 AWG Teflo Leads Zero ad Spa Adjustmet Bedix, Pigtail, Outdoor NACE NACE ANSI B.40.1 ANSI B.40.1 NEMA 4X, CE FM/CSA CL1 DIV 1 CSA CL 1 DIV 1 CSA CL 1 DIV 1 CSA CL 1 DIV 1 CSA CL1 DIV 1 FM/CSA CL 1 DIV 1 2 3 3/15 psi, 3/27 psi, 6/30 psi, 12/60 psi Field Adjustable ±1.0% Middle Half of Scale
Trasducers Model DCT PRESSURE TRANSDUCERS The Model DCT is desiged for geeral idustrial ad commercial requiremets offerig excellet performace over a wide rage of applicatios. This model provides high reliability, log-term stability, ad low cost relative to competig techologies. AMETEK - PMT has bee developig ad maufacturig high performace pressure sesig products for over 40 years, ad the DCT brigs a ew level of accuracy to the PMT product portfolio. Multiple voltage, curret (ma), ad ratiometric outputs Pressure rages from 1 to 3000 psi Available i brass (up to 500 psi oly) or stailess steel Temperature measuremet optio 0.20% accuracy Model ACT PRESSURE TRANSDUCERS The ACT offers premium performace ad versatility of use for may applicatios, both for geeral idustrial ad origial equipmet maufacturers (OEMs). This model is offered i pressure rages from 1 psi up to ad icludig 3000 psi. It combies precisio alog with the durability to operate uder difficult evirometal coditios. 0-100 mv output 0.20% accuracy SST diaphragm or brass (up to 500 psi oly) o-isolated Laser trimmed aalog compesatio PSIG, PSIA, PSIS, ad compoud Multiple pressure port ad electrical coectio optios 4
Model SPT AMPLIFIED OUTPUT PRESSURE TRANSDUCERS The Model SPT geeral purpose idustrial pressure trasducer is desiged usig all 316 stailess steel wetted parts to provide excellet media compatibility. This model trasducer provides a high level voltage output from a uregulated supply. Each uit is shipped fully compesated for pressure ad temperature ad is completely iterchageable without the eed for further calibratio. Superb stability, low cost ad prove reliability make it a ideal choice for OEM applicatios. 5X burst pressure ratio 0.25% accuracy Excellet stability Temperature compesated 10 stadard pressure rages up to 5000 psig Model IND-100 INDUSTRIAL PRESSURE TRANSMITTERS The Model IND-100 trasmitter is desiged for use i idustrial applicatios such as plat process ad utility pressure measuremets, compressor cotrol, ad hydraulic ad peumatic maufacturig systems. EMI/RFI resistace is provided o this trasmitter as protectio agaist oisegeeratig variable speed motors ad radio equipmet commo o a factory floor. This model provides exceptioal reliability i idustrial, as well as, outdoor eviromets. PMT agai provides a trasmitter uequaled i performace. The IND-100 model is perfectly suited for the demadig price requiremets of this market. Compact size ±0.25% accuracy Idoor or outdoor istallatios NEMA 4X available Approved to meet Class I, Divisio 1 itrisic safety stadards CE marked per EMC directive: 89/336/EEC 5
Military Trasducers Model 742 MILITARY TRANSDUCERS The Model 742 Trasducer accurately measures differetial pressures, gauge, absolute, vacuum, ad compoud ad trasmits a fully adjustable 4-20 ma or 0-5 VDC output sigal for remote display, recordig, or cotrol. The Model 742 Trasducer is available i rages up to 10,000 psig ad 600 psi differetial. Desiged to meet the specificatios for marie ad military applicatios Meets MIL-T-24742 Grade A shock tested EMI per MIL-STD-461 Vibratio per MIL-STD-167 Lightweight desig No-iteractig zero ad spa adjustmets for quick calibratio Miimal maiteace Model 89 MILITARY TRANSDUCERS The Model 89 Trasducer is a Uited States Navy approved QPL item that directly iterchageable with existig pressure trasducers desiged to MIL-Stadards. The moutig is desiged to match the footprit of existig trasducers for quick ad easy istallatio. The stadard Model 89 trasducer is available i gauge, compoud, vacuum ad absolute rages from 30 Hg vacuum to 0-6,000 psi. The Model 89 DP Trasducer is available i differetial rages from 300 iches of water to 400 psi. QPL approved for avy shipboard use Meets MIL-D-24304 ad MIL-P-24212 No-iteractig zero ad spa adjustmets for quick calibratio Pressure coectios coform to MS16142 6
Idustrial Trasmitters Model 831 Series FIXED RANGE PRESSURE TRANSMITTERS The Model 831 Pressure Trasmitter is a all stailess steel trasmitter desiged for years of stable performace i the toughest eviromets. This model has bee desiged to meet FM/CSA explosio-proof ratigs ad meets NACE stadards for offshore applicatios. Straight i-lie costructio for a slim profile ±0.30% accuracy Desiged to meet FM/CSA explosio-proof approvals Low power ad differetial pressure models available Pressure rages to 0-5000 psi All welded costructio Model 88 INDUSTRIAL PRESSURE TRANSMITTERS The Model 88 Series are high quality, full-featured pressure trasmitters desiged usig a compact size ad weight to elimiate complicated moutig hardware ad mechaical supports. The cover is retaied by a stailess steel chai, elimiatig losses due to misplaced parts. A 4-20 ma output is stadard. Meets NACE stadards for offshore applicatios. Available i NPT (88C) or flushmout (88F) A high-quality, full featured trasmitter ±0.25% accuracy 5:1 turdow capability FM ad CSA explosio-proof ad CSA itrisically safe 7
High Purity Products Model 1535 HIGH PURITY PRESSURE GAUGES Model 1535 pressure gauges are desiged ad maufactured for ultra-high purity gas distributio equipmet commoly used i semicoductor maufacturig. The Model 1535 is a all stailess steel gauge that is clea room produced, itroge purged, ad double bagged i 3 mil ylo ad 6 mil poly bags. This gauge is compatible with may toxic ad corrosive gases. A welded face seal coectio provides a threadless pressure seal ad virtually elimiates a typical cotamiatio source. The Model 1535 is available i NPT, FVCR, MVCR, ad MVCRF coectios. Features seamless bourdo tube with welded joits for heavy duty service Assembled ad packaged i class 100 clea room Wetted surfaces are electropolished Available with low mout or ceter back coectios Model HPT-100 HIGH PURITY PRESSURE TRANSMITTERS The HPT-100 is a series of pressure trasmitters specifically desiged to meet the ultra-high purity requiremets of the semicoductor idustry. Because these uits are typically used i applicatios measurig highly reactive ad/or toxic materials, our maufacturig toleraces ad operatig specificatios are very striget. The HPT-100 Series trasmitters are small i size ad elimiate the eed for bulky moutig hardware. These ultra-high purity trasmitters are packaged i a Class 100 clea room ad are double-bagged i a clea, dry, itroge eviromet to maitai the UHP coditio. Features Available i a flow-through ad sigle-eded models NEMA 4x rated Ideal for outdoor istallatios CE marked per EMC directive: 89/336/EEC Model IPS-200 HIGH PURITY GAUGES/SWITCHES The AMETEK Model IPS-200 switch gauge was specially desiged for use with gas hadlig equipmet i the semicoductor maufacturig idustry. Specific applicatios iclude coaxial moitorig, low cylider pressure alarm or high delivery pressure due to regulator drift. Class 100 clea room assembled. Available i a sigle setpoit versio. Exceeds ANSI B40.1 specificatios Helium leak tested 10 Ra surface fiish Wetted surfaces are reduced sulphur ad Hastelloy C22 7-10 Ra surface fiish 108 Features Magetic reed switch offers factory selectable switch actio (High Alarm, Low Alarm) No switch iput power required Various rages from 30 Hg VAC to 4000 PSI, sigle or dual scale Available i low mout ad ceter-back mout cofiguratio Available with face seal fittigs, tube stub or NPT coectios Switch setpoit adjustmets accessible from frot of moitor Switch settig may be adjusted o or off-lie Electropolished face seal, glad ad socket with less tha 10 Ra surface fiish
Peumatic Cotrollers Model 40 Series PRESSURE CONTROLLERS Model 40 Peumatic Cotrollers automatically positio a valve or other fial cotrol elemet to maitai process pressure at the desired set poit. As receivig cotrollers, they ca cotrol ay process variable trasmitted as a peumatic sigal. As a trasmitter, it is desiged to sese pressure ad trasmit a air sigal which is precisely proportioal to the measured variable. This output may be fed to ay remotely located moitorig, recordig or cotrol istrumet. Cotroller Features Wide selectio of process measurig elemets for pressure, differetial pressure, flow ad level Easy field calibratio Large, easy-to-read black ad white dial for maximum resolutio Case ad door with epoxy powdered fiish for evirometal protectio Idicatio of measured variable A o-bleed, high capacity relay with excellet stability ad fast respose Meets EPA NSPS OOOO (Quad O) for bleed rate less tha 6.0 scfh GO GREEN Trasmitter Features High accuracy ad repeatability Stabilized peumatic circuit A sigle trasmitter ca be used to actuate a umber of receivers for idicatio, recordig or cotrol at a umber of poits throughout a plat. 11 97
Level Trasmitters Model 375 SUBMERSIBLE LEVEL TRANSMITTERS The Model 375 Series Level Trasmitter is specially desiged to provide the coveiece of direct submergece i may types of liquid for quick, accurate ad reliable level measuremet. The simple desig ad rugged costructio of this solid state istrumet provide log-lastig service with virtually o maiteace. 4-20 ma output is stadard. 316 SS housig ad a removable, o-cloggig subose ed protects sesig elemets Veted to atmosphere through the surface ed of the cable with i-lie desiccat icluded Excellet accuracy, ±0.25% of full scale Reverse polarity ad surge protected Cable support bracket for extra support at depths up to 2500 feet or i agitated liquid Customer coectio ed of cable ad iteral sesor potted to miimize moisture itrusio Model 575 SUBMERSIBLE LEVEL TRANSMITTERS The Model 575 Series Level Trasmitter is specially desiged to provide the coveiece of direct submergece i may types of liquid for quick, accurate ad reliable level measuremet. The simple desig ad rugged costructio of this solid state istrumet provide loglastig service with virtually o maiteace. 4-20 ma output is stadard. A removable, o-cloggig subose ed protects sesig elemets Veted to atmosphere through the surface ed of the cable ±0.25% accuracy Reverse polarity ad surge protected Itrisically safe for Class 1 Divisio 1 s whe used with approved safety barrier Model SST SUBMERSIBLE LEVEL TRANSMITTERS The Model SST is easy to istall. Simply lower the trasmitter ito a vessel or well. It s that easy. All the electroics are mouted i a submersible 316 stailess steel housig. The trasmitter is available calibrated for ay spa eeded: from 0 to 6 psig or 0 to 0.4 Bar (0 to 14 ft. of water) to 0 to 150 psig or 10 bar (0 to 345 ft. of water) 10 0.69 ich diameter to fit i small bore systems Solid state semicoductor sesor for accuracy ad reliability Rugged 316 stailess steel diaphragm ad housig with excellet evirometal protectio Removable, o-cloggig subose ed protects sesig elemets Veted to the atmosphere through the surface ed of the cable Reverse polarity, surge, ad lightig protectio Ati-sag feature for easy probe removal
Model 675 SUBMERSIBLE LEVEL TRANSMITTERS The Model 675 Shark Cage is specifically desiged for slurry ad highly viscous applicatios where cloggig of the sesor area is commo. The Model 675 uses a 3.5 Diaphragm protected by a 4.75 cage to prevet uwated cloggig of the sesig area. This submersible level device is made of 316L SS which offers outstadig evirometal protectio ad is available i depths up to 110 feet. Oversized 3.5 diaphragm to prevet cloggig Extremely rugged costructio Reverse polarity ad surge protected Ideal techology for slurries, lift statios, ad pump cotrol Itrisically safe for Class 1 Divisio 1 s whe used with approved safety barrier Model SDT SUBMERSIBLE LEVEL TRANSMITTERS The Model SDT Submersible Level Trasmitter is specially desiged to provide the coveiece of direct submergece i may types of liquid for quick, accurate ad reliable level measuremet. The SDT provides a lower cost, lighter weight optio for submersible level applicatios. The simple desig ad rugged costructio of this solid state istrumet provide log lastig service with virtually o maiteace. The trasducer is available calibrated for ay spa eeded, from 0 to 1 psig or 0 to 0.07 bar (0 to 2.31 feet or 0 to 0.7 meters of water) to 0 to 300 psig or 0 to 20 bar (0 to 690 feet or 0 to 211 meters of water). Solid state semicoductor sesor for accuracy ad reliability Lightweight ad compact size Rugged housig with excellet evirometal protectio Advaced digital compesatio Optioal temperature measuremet capability Veted to the atmosphere through the surface ed of the cable Reverse polarity ad surge protected A two-wire 4 to 20 ma output is stadard, 0.5 to 4.5 VDC, 1 to 5 VDC, 1 to 6 VDC, or 0 to 5 VDC output sigals are optioal 11
U.S. GAUGE PMT PRODUCTS 820 PENNSYLVANIA BOULEVARD., FEASTERVILLE, PENNSYLVANIA 19053 U.S.A. TEL: +1 215-355-6900 FAX: +1 215-354-1801 www.ametekusg.com 2014, by AMETEK, Ic. All rights reserved. Prited i the U.S.A. 1M114PC (110078)