MATERIAL SAFETY DATA SHEET

Similar documents
Safety Data Sheet. Tuxton Synthetic Gear Oil 75W90

Safety Data Sheet. Tuxton Select Full Synthetic 0W20 API SN/GF-5

MATERIAL SAFETY DATA SHEET

GulfTEC Synthetic Motor Oil 0W-20

Safety Data Sheet. Tuxton Trust Dexron VI

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

Material Safety Data Sheet

INACTIVE - MOBIL 1 0W-40

Material Safety Data Sheet

MATERIAL SAFETY DATA SHEET Artisan Intensive Stone Cleaner SECTION 1 PRODUCT NAME AND COMPANY IDENTIFICATION

Material Safety Data Sheet

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

3. Fire And Explosion Hazard Data FLASH POINT: Not determined. However the product is combustible. METHOD USED: Estimated from ingredients.

SECTION 1 IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND OF THE COMPANY/UNDERTAKING. 129 Lockwood St CHEM-TEL (24 hour)

SECTION 1 IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND OF THE COMPANY/UNDERTAKING. 129 Lockwood St CHEM-TEL (24 hour)

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET General Finishes Corporation. SECTION 2: Composition/Information on Ingredients

MATERIAL SAFETY DATA SHEET

SECTION 2 COMPOSITION / HAZARDOUS INGREDIENTS INFORMATION INGREDIENT WT % TLV / PEL* CAS # 9-OCTADECEN

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET Certis USA 9145 Guilford Road, Suite 175 Columbia, Maryland 21046

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

Carolina Narrow Fabric Company

SECTION 2 - HAZARDOUS INGREDIENTS Ingredient Name CAS Number Percent TSCA

OSHA regulated. NE NE No No No. NE NE No No No

MATERIAL SAFETY DATA SHEET

Material Safety Data Sheet For: Die Set Lube MSDS I.D. #135 P/N Quart Size. MSDS I.D. #136 P/N Gallon Size

Air Tool Lubricant MSDS. Air Tool Lubricant. (800) (Poison Control USA) 24 Hours (800) (CHEMTREC) 24 Hours. Not Applicable - Mixture

Material Safety Data Sheet

SAFETY DATA SHEET SECTION 1 PRODUCT AND COMPANY INFORMATION SECTION 2 COMPOSITION INFORMATION ON INGREDIENTS SECTION 3 HAZARDS IDENTIFICATION

SECTION 1 MATERIAL IDENTIFICATION AND INFORMATION % OSHA PEL. Health Flammability Reactivity HMIS Hazard Code NFPA Hazard Code 2 1 1

MATERIAL SAFETY DATA SHEET WIZARDS METAL POLISH MSDS DATE: 7/31/2010

S A F E T Y D A T A S H E E T

MATERIAL SAFETY DATA SHEET

Product Name:Heat Sink Compound 1801 Morgan Street MSDS Number:148

TECH TIRE AND TUBE COMPOUND (INCL. LITE)

=========================================================================== Section 1 PRODUCT AND COMPANY IDENTIFICATION

MATERIAL SAFETY DATA SHEET

1. Chemical Product and Company Identification

Material Safety Data Sheet

SECTION 1 IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND OF THE COMPANY/UNDERTAKING. 129 Lockwood St CHEM-TEL (24 hour)

SENTINEL SEN-NO-FREEZE

MATERIAL SAFETY DATA SHEET

IDQ Operating, Inc. 44 Old Ridgebury Road Suite 300 Danbury, CT Tel Product And Company Identification

Material Safety Data Sheet

MATERIAL SAFETY DATA SHEET

Health Flammability 2 Reactivity 0 PRODUCT NAME FORMBY S* Build-Up Remover

MATERIAL SAFETY DATA SHEET

14 FORTUNE DRIVE PRODUCT NAME: EPO-TEK H20E, Part A BILLERICA, MA 01821

SECTION I - IDENTIFICATION

Safety Data Sheet. BOSS 139 Hi-Temp Mortar. Section 1. Identification. Section 2. Hazards Identification. Synonyms Manufacturer Stock Numbers

AQ 191 A Page 1 of 5 Sika Canada Inc. MATERIAL SAFETY DATA SHEET Date:99/09/30 App S.G.

SAFETY DATA SHEET Lead Stop

MATERIAL SAFETY DATA SHEET *SAEAMSG4343* SAE-AMS-G-4343 Grease, Pneumatic System

SAFETY DATA SHEET FOR FALK GMAX 6000

LIQUINOX MSDS. Section 1 : PRODUCT AND COMPANY IDENTIFICATION. Section 2 : INGREDIENT INFORMATION. Ingredient Name T.L.V.

SAFETY DATA SHEET. Orang-Sol 300. MANUFACTURER 24 HR. EMERGENCY TELEPHONE NUMBERS Detco Industries, Inc.

MATERIAL SAFETY DATA SHEET

=========================================================================== Section 1 PRODUCT AND COMPANY IDENTIFICATION

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

Kardol Quality Products 285 S. West Street Lebanon, Ohio Fax:

MATERIAL SAFETY DATA SHEET

AQ 191 A Page 1 of 5 Sika Canada Inc. MATERIAL SAFETY DATA SHEET Date: 99/09/30 App S.G.

Material Safety Data Sheet. Propylene Glycol 38% Section 1: PRODUCT INFORMATION. Manufacturer: Various Manufacturers. Section 2: HAZARDOUS INGREDIENTS

Cen-Pe-Co Hy-Torque Gear Lube Red With Temp Tac Page 1 of 5 05/01/08 MATERIAL SAFETY DATA SHEET

Safety Data Sheet Revised 16 November 2015

Material Safety Data Sheet Product No Cresyl Violet Acetate, Certified. Issue Date ( ) Review Date ( )

RILCO INC st STREET ROCK ISLAND, IL PRODUCT NAME: RILCO Tapping Oil 2889 / NFPA CHEMICAL NAME: N/A HAZARD

SECTION 1 IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND OF THE COMPANY/UNDERTAKING. 129 Lockwood St CHEM-TEL (24 hour)

Product Identification. Section 2 Hazardous Identification

1. Product And Company Identification

CLEANBOOST MAXX (GASOLINE AND DIESEL ADDITIVE)

IDQ Operating, Inc. 44 Old Ridgebury Road Suite 300 Danbury, CT Tel Product And Company Identification

Weight percent. CAS No.

MATERIAL SAFETY DATA SHEET FILE NO.: 378 NAME OF PRODUCT BIO-STAT MSDS DATE: 12 /18 /06

MSDS No: Issue Date: 29 April 2009 Page: 1 of 5 MATERIAL SAFETY DATA SHEET

Material Safety Data Sheet SAFETYBLUE Liquid

Material Safety Data Sheet Fiebing Company, Inc., Milwaukee, WI Phone #: (414) Emergency Phone:

GLENIUM 3000 (FORMERLY: RHEOBUILD 3000FC; PS1140 ADMIXTURE)

Safety Data Sheet (SDS) ARCOR EE-94HW ACTIVATOR

Safety Data Sheet. Address GHS Precautions If skin irritation occurs: Get medical advice/attention

Safety Data Sheet. Tuxton TO-4 Fluid SAE 50W

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

SAFETY DATA SHEET (SDS) Stick-It! Rear View Mirror Adhesive

MATERIAL SAFETY DATA SHEET

1. Product And Company Identification

Carcinogen: NTP (No) IARC (No) OSHA (No) DATE REVISED: 6/5/01 REV: A * HMIS CODE ratings are estimated by Epoxy Technology.

* HMIS CODE ratings are estimated by Epoxy Technology. II. HAZARDOUS INGREDIENTS CAS# WT % TOXICITY DATA

SECTION I - IDENTIFICATION

=========================================================================== Section 1 PRODUCT AND COMPANY IDENTIFICATION

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

SAFETY DATA SHEET. MANUFACTURER 24 HR. EMERGENCY TELEPHONE NUMBERS Nova Pressroom Products

MATERIAL SAFETY DATA SHEET

Transcription:

MATERIAL SAFETY DATA SHEET Page 1 SECTION 1 - PRODUCT AND COMPANY IDENTIFICATION. D-A Lubricant 1340 W. 29th St. Indianapolis, IN 46208 317/923-5321 CHEMICAL EMERGENCY HOTLINE 800 899-9004 PRODUCT NAME: OPEN GEAR ALL SEASON PRODUCT DESCRIPTION: OPEN GEAR CHEMICAL FAMILY: PETROLEUM OIL, GREASE Dear Customer: In compliance with the Superfund Amendments and Reauthorization Act (SARA Title III, Section 313), Federal Hazard Communications Regulations (WHMIS and OSHA 29 CFR 1910.1200) and in the interest of informed use of our product, we are providing you with this Material Safety Data Sheet (MSDS). This MSDS will be updated regularly to reflect the most recent information in our possession. Please ensure that obsolete MSDS sheets in your files for this part number are discarded. We THANK YOU for your continued patronage and look forward to providing you with additional quality products and services. Dear Customer: In compliance with the Superfund Amendments and Reauthorization Act (SARA Title III, Section 313), Federal Hazard Communications Regulations (WHMIS and OSHA 29 CFR 1910.1200) and in the interest of informed use of our product, we are providing you with this Material Safety Data Sheet (MSDS). This MSDS will be updated regularly to reflect the most recent information in our possession. Please ensure that obsolete MSDS sheets in your files for this part number are discarded. We THANK YOU for your continued patronage and look forward to providing you with additional quality products and services. SECTION 2 - HAZARDOUS INGREDIENTS COMPONENT CAS # % WT PEL TLV STEL UNITS LC50,PPM LD50,MG/KG PETROLEUM OILS 64742-65-0 60-99 5 5 10 MG/M3 RATI 13000 RABA 2000 64741-56-6 60-99 5 5 MG/M3 RATI 13000 RABA 2000 GRAPHITE 07782-42-5 6-8 2.5 2.0 MG/M3 MOLYBDENUM DISULFIDE 01317-33-5 <1 15 10 MG/M3 RATI 6500 ZINC DIORGANO-DITHIOPHOSPHATE 68649-42-3 <1 RATI >5000 RABA >2000 SARA Rep. LITHIUM 12-HYDROXYSTEARATE 07620-77-1 6-8 SECTION 3 - PHYSICAL DATA Boiling Pt Deg F/C: >500/>260 Specific Gravity: 0.85 to 0.92 Vapor Pressure (MM HG): NIL % Volatile Volume: NIL Vapor Density (Air=1): N/A Evaporation Rate: <0.1 Solubility in Water: NEGLIGIBLE Water/Oil Dist Coeff: 0

(Continued) Page 2 Appearance and Odor: Black grease with petroleum odor Physical State: SEMI-SOLID PH: N/A Freeze Pt Deg F/C: N/A Threshold Odor, PPM: N/A VOC: Lbs/Gal = N/A Grams/Liter = N/A Grams VOC/Gram Solid = N/A % VOC: N/A Boiling Pt Deg F/C: >500/>260 Specific Gravity: 0.85 to 0.92 Vapor Pressure (MM HG): NIL % Volatile Volume: NIL Vapor Density (Air=1): N/A Evaporation Rate: <0.1 Solubility in Water: NEGLIGIBLE Water/Oil Dist Coeff: 0 Appearance and Odor: Black grease with petroleum odor Physical State: SEMI-SOLID PH: N/A Freeze Pt Deg F/C: N/A Threshold Odor, PPM: N/A VOC: Lbs/Gal = N/A Grams/Liter = N/A Grams VOC/Gram Solid = N/A % VOC: N/A SECTION 4 - FIRE AND EXPLOSION HAZARD DATA Classification: Combustible at high temp NFPA Rating: 0.1.0 Combustion products: CO, CO2, Smoke, Sulfur, Nitrogen, Lithium, Molybdenum and Zinc Compounds. Flash Point Deg F/C: >370/>188 LEL %: N/A % UEL %: N/A % Extinguishing Media: Water Fog, Foam, Dry Chemical, CO2, Sand, or Earth. UN/NA/PIN#: N/A Special Fire Fighting Procedures Firefighters should wear self-contained breathing equipment. Treat as a Class B fire. Use water to cool threatened containers. Auto Ign. Temp Deg F/C: >500/>260 Unusual fire and explosion hazards: N/A Explosion Power: N/A Impact Sensitive: No Burning Rate: Low Static Sensitive: No Classification: Combustible at high temp NFPA Rating: 0.1.0 Combustion products: CO, CO2, Smoke, Sulfur, Nitrogen, Lithium, Molybdenum and Zinc Compounds. Flash Point Deg F/C: >370/>188 LEL %: N/A % UEL %: N/A % Extinguishing Media: Water Fog, Foam, Dry Chemical, CO2, Sand, or Earth. UN/NA/PIN#: N/A Special Fire Fighting Procedures Firefighters should wear self-contained breathing equipment. Treat as a Class B fire. Use water to cool threatened containers. Auto Ign. Temp Deg F/C: >500/>260 Unusual fire and explosion hazards: N/A Explosion Power: N/A Impact Sensitive: No Burning Rate: Low Static Sensitive: No SECTION 5 - HEALTH HAZARD DATA Product guide: TLV see Section 2 STEL: see Section 2 Routes of Entry: Skin contact, Eye, Inhalation, Ingestion Effects of Overexposure: Acute; may cause respiratory system, skin, and/or eye irritation. Ingestion may cause nausea, cramps, diarrhea, and other gastrointestinal disorders. Chronic; excess mist may cause respiratory problems. Excess skin contact may cause dryness and/or sensitization. Any suspected carcinogen = or > 0.1%?: NO Emergency and First Aid Procedures Eye: Immediately flush with water for 15 minutes and call a physician.

(Continued) Page 3 Inhalation: If affected, remove to fresh air, administer oxygen and call a physician. Skin: Wash thoroughly with plenty of water and soap. Ingestion: Seek a physician immediately, show MSDS or Label; DO NOT induce vomiting. Wash soiled clothing before wearing again. Product guide: TLV see Section 2 STEL: see Section 2 Routes of Entry: Skin contact, Eye, Inhalation, Ingestion Effects of Overexposure: Acute; may cause respiratory system, skin, and/or eye irritation. Ingestion may cause nausea, cramps, diarrhea, and other gastrointestinal disorders. Chronic; excess mist may cause respiratory problems. Excess skin contact may cause dryness and/or sensitization. Any suspected carcinogen = or > 0.1%?: NO Emergency and First Aid Procedures Eye: Immediately flush with water for 15 minutes and call a physician. Inhalation: If affected, remove to fresh air, administer oxygen and call a physician. Skin: Wash thoroughly with plenty of water and soap. Ingestion: Seek a physician immediately, show MSDS or Label; DO NOT induce vomiting. Wash soiled clothing before wearing again. SECTION 6 - REACTIVITY DATA Stable: YES Incompatibility (Materials to avoid): YES, strong oxidizing agents Hazardous Decomposition Products: YES, combustion products, see Section 4 Hazardous Polymerization: NO Stable: YES Incompatibility (Materials to avoid): YES, strong oxidizing agents Hazardous Decomposition Products: YES, combustion products, see Section 4 Hazardous Polymerization: NO SECTION 7 - SPILL OR LEAK PROCEDURES Listed in SARA Title III, #302: NO #304, Cercla: NO #313: YES Steps to be taken in case material is released or spilled: Eliminate source if safe to do so. Prevent from entering waterways and drains. Wear suitable personal protective equipment. Dike and absorb with inert material and transfer to a sealed approved container for disposal. Report Quantity, Lb: N/A Kg: N/A TPQ, Lb: N/A Regulations: SARA Hazard Waste: NO NO.: Disposal Method: In accordance with Federal, State, and Local Regulations. *** SARA Waste Characteristic: N/A *** EPA Hazardous Waste Number: N/A Listed in SARA Title III, #302: NO #304, Cercla: NO #313: YES Steps to be taken in case material is released or spilled: Eliminate source if safe to do so. Prevent from entering waterways and drains. Wear suitable personal protective equipment. Dike and absorb with inert material and transfer to a sealed approved container for disposal. Report Quantity, Lb: N/A Kg: N/A TPQ, Lb: N/A Regulations: SARA Hazard Waste: NO NO.: Disposal Method: In accordance with Federal, State, and Local Regulations. *** SARA Waste Characteristic: N/A *** EPA Hazardous Waste Number: N/A

(Continued) Page 4 SECTION 8 - SAFE HANDLING AND PROTECTION INFORMATION Respiratory Protection: Use only in well ventilated areas. Ventilation - Local: Recommended Mechanical: Required Special: Avoid Heat/Flame Protective Gloves: Oil/Solvent resistant Eye Protection: Safety Glasses/Goggles Other Protective Equipment: Oil/Solvent resistant clothing and footwear. If ventilation is inadequate, wear approved respiratory equipment. Estimated LD50, Mg/Kg: YES Dermal, Rabbit 2000, Oral Rat 13000 Estimated LC50, PPM: NO Sensitization: NO Irritant: NO Synergistic Agents: NO Respiratory Protection: Use only in well ventilated areas. Ventilation - Local: Recommended Mechanical: Required Special: Avoid Heat/Flame Protective Gloves: Oil/Solvent resistant Eye Protection: Safety Glasses/Goggles Other Protective Equipment: Oil/Solvent resistant clothing and footwear. If ventilation is inadequate, wear approved respiratory equipment. Estimated LD50, Mg/Kg: YES Dermal, Rabbit 2000, Oral Rat 13000 Estimated LC50, PPM: NO Sensitization: NO Irritant: NO Synergistic Agents: NO SECTION 9 - SPECIAL PRECAUTIONS Precautions to be taken in handling and storing: Use only in well ventilated areas. Avoid prolonged or repeated breathing of fumes, vapor, or mist. Avoid contact with eyes and skin. DO NOT take internally. Wash thoroughly after using. In case of accident or illness, consult a physician immediately; show label and/or MSDS. Keep out of reach of children. Always read and follow directions on product label. Other precautions: More technical information (MSDS) available upon request. For professional industrial use only. Good personal hygiene is important. Empty containers retain residue which can be dangerous. DO NOT pressurize, cut, weld, braze, solder, drill, grind, or expose such containers to heat, flame, sparks, or other ignition sources; they may explode and cause injury or death. The information and recommendations provided herein are believed to be accurate as of the date hereof. However, such information and recommendations are provided without warranty of any kind and D-A Lubricant disclaims any and all liability or legal responsibility for use or reliance upon same. Precautions to be taken in handling and storing: Use only in well ventilated areas. Avoid prolonged or repeated breathing of fumes, vapor, or mist. Avoid contact with eyes and skin. DO NOT take internally. Wash thoroughly after using. In case of accident or illness, consult a physician immediately; show label and/or MSDS. Keep out of reach of children. Always read and follow directions on product label. Other precautions:

(Continued) Page 5 More technical information (MSDS) available upon request. For professional industrial use only. Good personal hygiene is important. Empty containers retain residue which can be dangerous. DO NOT pressurize, cut, weld, braze, solder, drill, grind, or expose such containers to heat, flame, sparks, or other ignition sources; they may explode and cause injury or death. The information and recommendations provided herein are believed to be accurate as of the date hereof. However, such information and recommendations are provided without warranty of any kind and D-A Lubricant disclaims any and all liability or legal responsibility for use or reliance upon same.