Absolute Pressure Gauges: Bellow Type MODEL : APBL Why Absolute Pressure Gauge? The atmospheric pressure varies from place to place depedig up o the altitude of the locatio ad prevailig weather coditios. I such variable coditios, precise pressure measuremet ca be arrived oly if a fixed (u-chagig) referece poit is established. For this purpose we have developed elemet of Twi Bellows, oe of the same is totally evacuated ad sealed, which shall be the referece poit for calibratio i.e. Absolute Zero. These twi bellows are coected through a special type of movemet. Ay pressure applied i the secod bellow is compared to the referece bellow (sealed bellow) to get a accurate measuremet of absolute pressure, through a precisio Movemet mechaism. Features ompliace to latest EN-837 stadard Rage : As show i the table Bellow i SS316 as stadard providig better mechaical properties guarateeig repeatability ad accuracy Accuracy ±1% FSD Specificatios Ref. Stadard EN-837 Dial 150 mm i Alumiium, white backgroud, black markigs ase SS304 / SS316 with bayoet bezel Protectio IP-68 (IS:13947 part I / IE:60529) Widow Safety glass (Shatter proof / Tougheed glass) Sesor Bellow i SS316 / SS316L Socket 22mm Square i SS316 / SS316L Movemet SS304, SS316 oectio 1/2" NPT (M) as stadard (other optioal) Accuracy ±1% FSD Over rage As per EN 837 Zero adjustmet Micrometer Poiter Temperature suitability Ambiet (-)20 to 60, Media 100 Temperature Effect Withi ±0.4% FSD/10, whe temperature chages from referece temperature of 20 (as per EN-837 stadard) Optioal NAE compliace E Rages 0 to 0.6 Kg/cm2(a) 0 to 1 kg/cm2(a) 0 to 1.6 kg/cm2(a) Other o request Note: Equivalet Readig i other pressure Uits also ca be provided o request The parameters metioed here are the stadard specificatios / values geerally used for most of the process applicatios. Ay other specificatio ot appearig here also ca be provided as per customer requiremet. Uder Techical ollaboratio with M/s. Gauges Bourdo, Frace 36
Orderig Iformatio MODEL BASI MODEL ODE APBL Absolute PG, Bellow Sesig V S Y P MOUNTING Bottom Etry, Local Moutig Bottom Etry, Surface Moutig Bottom Etry, 2" Pipe Moutig Back Etry, Local Moutig Back Etry, Flush Pael Moutig L DIAL SIZE 150 150 mm ASE BELLOW SOKET L MOVEMENT ONNETION o Thread T Size 1/4 06 Type NPS NS 3/8 10 15 NPT BSP NT BP 1/2 3/4 1 20 25 BSPT JIS-PF JIS-PT Gas R Rp BT PF PT GS RR RP Male/ Female Male Female M F ATX BGS BOB BSN LB EM DUS NA OXY VP A L KS BAR PSI KPA MPA MBR MMW MW MW INW MMH MH INH TOR OPTION Built I Gauge Saver Blow out disc at back Built I Subber olour Bad E markig Dual Scale NAE O2 leaig Vac protectio Accessory Other Nil UNIT kg/cm2(a) bar(a) psi(a) kpa(a) MPa(a) mbar(a) mm W(a) cm W(a) m W(a) ich W(a) mm Hg(a) cm Hg(a) ich Hg(a) Torr Other (Please specify) RANGE Please select from Table Pitch 1.5 e.g. For 1/2"NPT(M), : T15NTM For x1.5 (F), : TF Sample Model : APBL-V-150-----T15NTM-(0-1)-BAR-L 37
Absolute Pressure Gauges - Bourdo Type MODEL : APBR Why Absolute Pressure Gauge? The atmospheric pressure varies from place to place depedig up o the altitude of the locatio ad prevailig weather coditios. I such variable coditios, precise pressure measuremet ca be arrived oly if a fixed (u-chagig) referece poit is established. This is achieved by totally evacuatig ad sealig the Bourdo tube, which will act as the referece poit for calibratio i.e. Absolute Zero. The process pressure is applied iside the eclosure surroudig the Bourdo tube. Ay pressure applied is compared to the sealed referece (Bourdo tube) to get a accurate measuremet of absolute pressure, through a precisio Movemet mechaism. Features ompliace to latest EN-837 stadard Rage : As show i the table Bourdo i SS316 as stadard providig better mechaical properties guarateeig repeatability ad accuracy Accuracy ±1% FSD Note: Bourdo type Absolute Pressure Gauges are recommeded for o-corrosive, clea, clear (colourless) & dry Gases / Air oly Specificatios Ref. Stadard EN-837 Dial 100 mm/150 i Alumiium, white backgroud, black markigs ase SS304 / SS316 with bayoet bezel Protectio IP-68 (IS:13947 part I / IE:60529) Widow Safety glass (Shatter proof / Tougheed glass) Sesor Bourdo i SS316 / SS316L Socket 22mm Square i SS316 / SS316L Movemet SS304, SS316 oectio 1/2" NPT (M) as stadard (other optioal) Accuracy ±1% FSD Over rage As per EN 837 Zero adjustmet Micrometer Poiter Temperature suitability Ambiet (-)20 to 60, Media 100 Temperature Effect Withi ±0.4% FSD/10, whe temperature chages from referece temperature of 20 (as per EN-837 stadard) Optioal NAE compliace E Rages 0 to 1 kg/cm2(a) 0 to 1.6 kg/cm2(a) 0 to 2.5 kg/cm2(a) 0 to 4 kg/cm2(a) Other o request Note: Equivalet Readig i other pressure Uits also ca be provided o request The parameters metioed here are the stadard specificatios / values geerally used for most of the process applicatios. Ay other specificatio ot appearig here also ca be provided as per customer requiremet. Uder Techical ollaboratio with M/s. Gauges Bourdo, Frace 38
Orderig Iformatio MODEL BASI MODEL ODE APBR Absolute PG, Bourdo Sesig V S Y P MOUNTING Bottom Etry, Local Moutig Bottom Etry, Surface Moutig Bottom Etry, 2" Pipe Moutig Back Etry, Local Moutig Back Etry, Flush Pael Moutig 100 100 mm ASE S6T S6T DIAL SIZE BOURDON L Ti SOKET L Ti MOVEMENT 150 150 mm ATX BGS BSN LB EM DUS NA OXY VP A L KS BAR PSI KPA MPA MBR MMW MW MW INW MMH MH INH TOR OPTION Built I Gauge Saver Built I Subber olour Bad E markig Dual Scale NAE O2 leaig Vac protectio Accessory Other Nil UNIT kg/cm2(a) bar(a) psi(a) kpa(a) MPa(a) mbar(a) mm W(a) cm W(a) m W(a) ich W(a) mm Hg(a) cm Hg(a) ich Hg(a) Torr Other (Please specify) 3/4 1 ONNETION o Thread T Size 1/4 06 Type NPS NS 3/8 1/2 10 15 NPT BSP NT BP 20 25 BSPT JIS-PF JIS-PT Gas R Rp Pitch 1.5 BT PF PT GS RR RP Male/ Female Male Female M F RANGE Please select from Table e.g. For 1/2"NPT(M), : T15NTM For x1.5 (F), : TF Sample Model : APBR-V-150-----T15NTM-(0-1)-KS-L 39
Absolute Pr. Gauges - Diaphragm Type MODEL : APDS Why Absolute Pressure Gauge? The atmospheric pressure varies from place to place depedig up o the altitude of the locatio ad prevailig weather coditios. I such variable coditios, precise pressure measuremet ca be arrived oly if a fixed (u-chagig) referece poit is established. For this purpose, the Gauge is provided with 2 hambers separated by a Diaphragm. Oe chamber is totally evacuated ad sealed, which acts as the referece poit for calibratio i.e. Absolute Zero. The process pressure is applied to the pressure chamber at the other side of the Diaphragm. Ay pressure applied iside the pressure chamber is compared to the sealed chamber to get a accurate measuremet of absolute pressure, through a precisio Movemet mechaism Features ompliace to latest EN-837 stadard Rage : As show i the table Diaphragm i SS316 as stadard providig better mechaical properties guarateeig repeatability ad accuracy Accuracy ±1.6% FSD Specificatios Ref. Stadard EN-837 Dial 100 mm/150 i Alumiium, white backgroud, black markigs ase SS304 / SS316 with bayoet bezel Protectio IP-68 (IS:13947 part I / IE:60529) Widow Safety glass (Shatter proof / Tougheed glass) Sesor Diaphragm i SS316 / SS316L Wetted Parts SS316 / SS316L Movemet SS304, SS316 oectio 1/2" NPT (M) as stadard (other optioal) Accuracy ±1.6% FSD Over rage As per EN 837 Zero adjustmet Micrometer Poiter Temperature suitability Ambiet (-)20 to 60, Media 100 Temperature Effect Withi ±0.8% FSD/10, whe temperature chages from referece temperature of 20 (as per EN-837 stadard) Optioal NAE compliace E Rages 0 to 500 mmw(a) 0 to 600 mmw(a) 0 to 1000 mmw(a) 0 to 1600 mmw(a) 0 to 2500 mmw(a) 0 to 4000 mmw(a) 0 to 6000 mmw(a) Other o request Note: Equivalet Readig i other pressure Uits also ca be provided o request The parameters metioed here are the stadard specificatios / values geerally used for most of the process applicatios. Ay other specificatio ot appearig here also ca be provided as per customer requiremet. Uder Techical ollaboratio with M/s. Gauges Bourdo, Frace 40
Orderig Iformatio MODEL BASI MODEL ODE APDS Absolute PG, Diaphragm Type V S Y MOUNTING Bottom Etry, Local Moutig Bottom Etry, Surface Moutig Bottom Etry, 2" Pipe Moutig 100 100 mm DIAL SIZE ASE 150 150 mm ATX BGS BOB BSN LB EM DUS NA OXY VP A L OPTION Built I Gauge Saver Blow out disc at back Built I Subber olour Bad E markig Dual Scale NAE O2 leaig Vac protectio Accessory Other Nil DIAPHRAGM L PRESSURE HAMBER L MOVEMENT ONNETION o Thread T Size 1/4 06 Type NPS NS 3/8 1/2 10 15 NPT BSP NT BP 3/4 1 20 25 BSPT JIS-PF JIS-PT Gas R Rp Pitch 1.5 BT PF PT GS RR RP Male/ Female Male Female M F KS BAR PSI KPA MPA MBR MMW MW MW INW MMH MH INH TOR UNIT kg/cm2(a) bar(a) psi(a) kpa(a) MPa(a) mbar(a) mm W(a) cm W(a) m W(a) ich W(a) mm Hg(a) cm Hg(a) ich Hg(a) Torr Other (Please specify) RANGE Please select from Table e.g. For 1/2"NPT(M), : T15NTM For x1.5 (F), : TF Sample Model : APDS-V-150-----T15NTM-(0-1000)-MMW-L The recommedatios made i this catalogue are to be used as iteded guide. No guaratee of material ca be udertake sice other factors may affect the performace. We reserve the right to chage the specificatios metioed i this catalogue without ay otice as improvemets & developmet is a cotiuous process at Geeral. Resposibility of typographical errors is specifically disclaimed. 41