STANDARD EQUIPMENT Pole Chin Guide Br CORDLESS POLE PRUNER Guide Br Cover INSTRUCTION MANUAL Rer Hndle SPECIFICATIONS Input: Br Length: Cutting Length Mx.: Chin Speed: Oil Tnk Cpcity: Length: Weight: 18V 200mm 170mm 3.76m/s 125ml 1.83-2.77m 3.9kg Pruner Hed Shoulder Strp ozito.com.u Auxiliry Hndle PXCPPS-018 WARRANTY IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY YOU MUST RETURN THE PRODUCT TO YOUR NEAREST BUNNINGS WAREHOUSE WITH YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO RETURNING YOUR PRODUCT FOR WARRANTY PLEASE TELEPHONE OUR CUSTOMER SERVICE HELPLINE: The enefits provided under this wrrnty re in ddition to other rights nd remedies which re ville to you t lw. Austrli 1800 069 486 New Zelnd 0508 069 486 Generlly you will e responsile for ll costs ssocited with clim under this wrrnty, however, where you hve suffered ny dditionl direct loss s result of defective product you my e le to clim such expenses y contcting our customer service helpline ove. TO ENSURE A SPEEDY RESPONSE PLEASE HAVE THE MODEL NUMBER AND DATE OF PURCHASE AVAILABLE. A CUSTOMER SERVICE REPRESENTATIVE WILL TAKE YOUR CALL AND ANSWER ANY QUESTIONS YOU MAY HAVE RELATING TO THE WARRANTY POLICY OR PROCEDURE. Our goods come with gurntees tht cnnot e excluded t lw. You re entitled to replcement or refund for mjor filure nd for compenstion for ny other resonly foreseele loss or dmge. You re lso entitled to hve the goods repired or replced if the goods fil to e of cceptle qulity nd the filure does not mount to mjor filure. 5 YEAR REPLACEMENT WARRANTY Your Product is gurnteed for period of 60 months from the originl dte of purchse nd is intended for DIY (Do It Yourself) use only. If product is defective it will e replced in ccordnce with the terms of this wrrnty. Lithium Ion tteries nd chrgers re covered y 36 month wrrnty Wrrnty excludes consumle prts, for exmple: guide r, chin nd included ccessories. WARNING The following ctions will result in the wrrnty eing void. If the tool hs een operted on supply voltge other thn tht specified on the tool. If the tool shows signs of dmge or defects cused y or resulting from use, ccidents or ltertions. Filure to perform tennce s set out within the instruction mnul. If the tool is disssemled or tmpered with in ny wy. OZITO Austrli/New Zelnd (Hed Office) 1-23 Letcon Drive, Bngholme, Victori, Austrli 3175. 0418
KNOW YOUR PRODUCT SETUP & PREPARATION CORDLESS POLE PRUNER 1. Chin 2. Guide Br 3. Oil Cp 4. Side Cover 5. Pivoting Pruner Hed Relese 6. Telescopic Tue Lock 7. Min Tue 8. Auxiliry Hndle 9. Shoulder Strp Holder 10. Assemly Nut 11. Pivoting Hndle Relese 12. Rer Hndle 13. Chin Cover Lock 14. Chin Tension Adjustment Dil 15. Switch Lock 16. Auxiliry Hndle Lever 17. Trigger Switch 18. Bttery Seting 19. Mounting Attchment Lever 1 2 3 4 5 6 1. ASSEMBLY CAUTION: ENSURE THE TOOL IS OFF & THE BATTERY REMOVED BEFORE PERFORMING ANY OF THE FOLLOWING OPERATIONS. Fitting Rer Hndle 1. Push the rer hndle fully onto tue ligning the internl prongs. 2. Screw tight with the ssemly nut. 7 8 Fitting Auxiliry Hndle 1. Plce the Auxiliry Hndle onto the mounting ttchment. 13 14 15 9 16 17 18 19 10 11 2. Pss the olt through the uxiliry hndle nd screw the lever to the end of the olt. 12 BATTERY & CHARGER This tool is comptile with ll ttery nd chrgers from the Ozito Power X Chnge Rnge. ONLINE MANUAL Scn this QR Code with your moile device to tke you to the online mnul. 3. Select the most comfortle position nd close the lever to lock the uxiliry hndle in position.
Sprocket Sprocket 2. TENSIONING THE CHAIN Fitting Pruner Hed CAUTION: THE CHAIN HAS SHARP EDGES. FOR YOUR OWN SAFETY, PLEASE WEAR WORK GLOVES. 1. Align the pruner hed nd the motor hed so the rrows on oth coincide. 2. () Press the pruner hed ginst the motor hed. This will cuse the lock utton to e pushed to the right. () Turn the pruner hed clockwise. The pruner hed will lock onto the motor hed nd is then secured in plce. 1. Loosen the chin cover lock. Do not remove the side cover. Lock Button CAUTION: IF YOU TRY TO ROTATE THE CHAIN TENSIONING ADJUSTMENT DIAL WHILST THE CHAIN COVER LOCK IS TIGHT, IT WILL RESULT IN THE CHAIN NOT LOOSENING AND POSSIBLE DAMAGE TO THE MECHANISM. Sprocket 2. Adjust the chin tension with the chin tensioning djustment dil. Turning the dil CLOCKWISE increses the chin tension, turning it COUNTER-CLOCKWISE decreses the chin tension. Note: T he Lock Button will CLICK ck to the left (originl position) when the pruner hed is correctly secured in plce. Fitting Guide Br & Chin 1. Loosen the chin cover lock nd remove the side cover. Sprocket CAUTION: THE CHAIN HAS SHARP EDGES. FOR YOUR OWN SAFETY, PLEASE WEAR WORK GLOVES. 2. Plce the chin in the groove of the guide r s shown. Refer to the imge printed on the guide r tht indictes the direction tht the chin should fce. IMPORTANT: IF THE CHAIN IS INSTALLED BACKWARDS (CHAIN CUTTERS ARE FACING IN THE OPPOSITE Sprocket DIRECTION OF ROTATION) THE POLE PRUNER WILL VIBRATE EXCESSIVELY AND NOT CUT. 3. Plce onto the mount, ensuring tht the chin sits round the chin sprocket. Sprocket 4 Re-mount nd finger-tighten the side cover with the chin cover lock. Note: O nly tighten the chin cover locking kno securely once the chin tension hs een djusted (see: Tensioning the chin.) For the correct chin tension, firmly pull up on the chin t the middle of the top of the exposed guide r. When the chin is pulled up to its highest point, the ottom tip of the links should only just sty in the trck [middle of the guide r] 3-4mm gp is the idel tension 3. After the chin hs een ccurtely tensioned, lock the guide r in plce with the chin cover locking kno. Note: P roper tension of the chin is extremely importnt nd must e checked efore strting, s well s during ny cutting opertion. Tking the time to mke djustments to the chin will result in improved cutting performnce nd prolonged chin life.
3. OIL 4. PREPARATION Adjusting the telescope length IMPORTANT: ONLY USE OIL THAT IS EXPRESSLY LABELLED CHAIN BAR OIL. 1. Remove the chin r oil cp. 1. To unlock the telescopic tue lock, twist it in clockwise direction while pointing the chin wy from the user. 2. Fill the tnk with chin r oil. The cpcity of the chin oil tnk is 125ml. Do not over fill. Note: T he locking nd unlocking directions re indicted on the locking collr. mx 2. Pull out the telescopic tues to suit the required working height. 3. Refit cp nd clen ny oil spillge. 4. Alwys fill oil tnk when the oil level is elow the imum mrk on the oil level window. mx mx mx WARNING!: NEVER START WORK UNLESS THE CHAIN AND BAR ARE LUBRICATED 3. To lock in the desired position, twist the telescopic tue lock in counterclockwise direction. Adjusting the Rer Hndle 1. Press the two pivoting hndle releses, one ech side nd djust the ngle of the hndle up or down to ny of 4 positions. 4. To check the luricting system, switch on the pole pruner nd hold it with the guide r nd chin ove some light coloured pper such s newspper. A stedily incresing stin cused y oil spry shows the luricting system is working. Adjusting the Auxiliry Hndle 1. () Open the hndle lever nd set the required () tilt of the uxiliry hndle, close to lock into position. 2. () Open the mounting rcket lever nd () slide the uxiliry hndle into therequired position, close to lock into position. Note: C hin r oil my lek if the tool is left for long periods. This is norml. If the tool is to e left unused for n extended time, drin the oil from the tool. Refill efore use.
5. INSERTING & REMOVING THE BATTERY Adjusting the Pruner Hed Pivoting the Pruner Hed 1. Press the two pivoting hed releses, one ech side nd djust the ngle of the pruner hed up or down to ny of 7 positions. Instlling Bttery into the Pole Pruner 1. Align the ris of the ttery with the recess elow the hndle Adjusting the Pruner Hed 90º 1. Pull the lock utton to the right then rotte the pruner hed 90º clockwise Note: Keep the pruner hed pressed ginst the motor hed when rotting. 2. The pruner hed will lock onto the motor hed nd is then secured in plce. Lock Button Lock Button 2. Slide the ttery in so tht it clicks into plce. Removing Bttery from the Pole Pruner 1. Press nd hold the ttery relese t to relese the ttery. Note: The Lock Button will CLICK ck to the left (originl position) when the pruner hed is correctly secured in plce. 2. Slide the ttery out. Attching the Shoulder Strp 1. Fsten to the shoulder strp holder on the tue. 2. Wer the shoulder strp so tht it lies over the left shoulder. PXCPPS-018
OPERATION Lig 6. SWITCHING ON/OFF L ig is the process of removing 1 the rnches from fllen tree. Check the direction in which rnch will end efore cutting it. Alwys cut on the opposite side to the 2 ending direction so tht the guide r is not pinched in the cut. For lrge lims tht cnnot e removed in one cut, mke n initil cut from the ent side nd finish y swing from the opposite direction. Do not remove lims tht re supporting the fllen tree on the ground until the tree hs een cut into lengths. Switching On 1. Hold the pruner firmly with oth hnds. Pruning 2. Slide the switch lock () to the front with your thum nd hold, then squeeze the trigger switch (). 1 3. The chin will now e running redy to mke cut. Relese the switch lock (). 2 P runing is the removl of lim or rnch from stnding tree. Swing Techniques Off Switching 3. Relese the trigger switch. The chin nd motor will quickly stop. 60 W hen removing rnches, hold the pruner t n ngle rnging from mximum 60 to horizontl in order to void eing struck y flling rnch. A t the end of the cut, the weight of the pruner suddenly increses for the user, ecuse it is no longer supported on the rnch. There is the risk of losing control of the pruner. S w off the lower rnches on the tree first. By doing so, it is esier for the cut rnches to fll to the ground. O nly pull the pruner out of the cut with the chin running. By doing so, you cn prevent it from getting jmmed. APPLICATIONS WARNING!:IF THE CHAIN COMES IN CONTACT WITH A HARD OBJECT, VISUALLY INSPECT THE CHAIN & BAR FOR DAMAGE. IF THE CHAIN OR BAR IS DAMAGED, DO NOT CONTINUE TO OPERATE THE POLE PRUNER. WARNING!: NEVER USE THE POLE PRUNER WHEN STANDING ON A LADDER OR UNEVEN GROUND. DO NOT OVERREACH. ALWAYS USE BOTH HANDS TO HOLD THE POLE PRUNER. CAUTION: ALWAYS USE THE BUCKING SPIKES WHEN PERFORMING CUTS WITH THE POLE PRUNER TO AVOID KICKBACK (REFER TO OPERATION SECTION OF MANUAL). CAUTION: ENSURE APPROPRIATE CARE IS TAKEN WHEN CUTTING ABOVE SHOULDER HEIGHT. D o not sw with the tip of the guide r. This could led to kick ck nd possile injury.
MAINTENANCE WARNING: BEFORE CLEANING YOUR POLE PRUNER OR CARRYING OUT ANY MAINTENANCE PROCEDURE, MAKE SURE THAT THE MOTOR IS OFF AND THE BATTERY REMOVED TO PREVENT ACCIDENTAL STARTING. CAUTION: ALWAYS WEAR GLOVES WHEN HANDLING THE CHAIN AS IT IS VERY SHARP AND CAN CUT YOU WHEN IT IS NOT MOVING. Mintining the guide r 1. Remove ny swdust from the guide r, including the groove. Oil nd swdust coe nd emit urning smell during opertion if the lde is not regulrly clened. 2. Mke sure tht the oil port is not clogged. Grese the nose sprocket t the tip of the guide r. 3. Check for oil lekge nd loose fstenings, especilly those securing the hndles nd the guide r. 4. Reverse the guide r every 8 working hours to ensure uniform wer. Check the guide rils frequently nd if necessry remove urrs nd squre up the rils using flt file. TROUBLESHOOTING Bttery protection system The tool is equipped with the ttery protection system, which helps to ensure long service life. The output power utomticlly cuts off during opertion when the tool nd/or ttery re plced under the following situtions: When the tool is overloded: If this occurs, relese the trigger switch nd remove cuses of overlod, then pull the switch trigger gin to restrt. When the reing ttery cpcity ecomes low: Rechrge the ttery pck. Note: The ttery protection system does not in ny wy dmge the tool. Note: The indicted cpcity my e lower thn the ctul level during use or immeditely fter using the tool. The ttery hs short run time Ensure the ttery is properly chrged. It will tke 4-5 chrging cycles efore the ttery reches optimum chrge nd run time. Chin Shrpening Chin File: 3.96mm (5/32 ) Chin Pitch: 9.53mm (3/8 ) Chin Guge: 1.3mm (0.050 ) Shrpen the chin regulrly to tin optimum performnce of the sw. Signs of dull chin re: The swdust ecomes powder-like Extr force is required to execute cut The cut does not trck in stright line Incresed virtion LEFT HAND CUTTERS RIGHT HAND CUTTERS Shrpen ech cutter using round 3.96mm (5/32 ) chin file. Keep the file level with the top plte of the tooth. Alwys use outwrd strokes nd tin 30 ngle etween the chin nd file. After shrpening, the cutters must ll hve the sme width nd length. After every 3 4 uses get n uthorised repir centre to professionlly shrpen your chin. They hve the specil tools necessry to ensure the correct cutting ngles nd depths. 30 30 DESCRIPTION OF SYMBOLS Note: Ozito Industries will not e responsile for ny dmge or injuries cused y repir of the tool y n unuthorised person or y mishndling. SPARE PARTS Regultor complince mrk Red instruction mnul Wer sfety gloves Wer eye, er nd hed protection Keep ystnders wy Chin Replcement: The chin cn e purchsed through Ozito spre prts or from your locl Bunnings Wrehouse. The correct chin cn e purchsed y mtching the pitch, guge nd numer of links s shown elow: 10 m Wer sfety oots 102 Sound pressure level Do not sw in the rin or leve the pole pruner outdoors while rining. Mintin imum clernce of 10 m from current-crrying lines. Life-thretening dnger from electric shock. 2 9.53 mm(3/8) 1.3 mm(.050 ) 33 Links Spre prts cn e ordered from the Specil Orders Desk t your locl Bunnings Wrehouse. For further informtion, or ny prts not listed here, visit www.ozito.com.u or contct Ozito Customer Service: Austrli 1800 069 486 New Zelnd 0508 069 486 E-mil: enquiries@ozito.com.u CARING FOR THE ENVIRONMENT Power tools tht re no longer usle should not e disposed of with household wste ut in n environmentlly friendly wy. Plese recycle where fcilities exist. Check with your locl council uthority for recycling dvice. Recycling pckging reduces the need for lndfill nd rw mterils. Reuse of recycled mteril decreses pollution in the environment. Plese recycle pckging where fcilities exist. Check with your locl council uthority for recycling dvice.
ELECTRICAL SAFETY WARNING! When using s-powered tools, sic sfety precutions, including the following, should lwys e followed to reduce risk of fire, electric shock, personl injury nd mteril dmge. Red the whole mnul crefully nd mke sure you know how to switch the tool off in n emergency, efore operting the tool. Sve these instructions nd other documents supplied with this tool for future reference. The chrger hs een designed for 230V nd 240V only. Alwys check tht the power supply corresponds to the voltge on the rting plte. Note: The supply of 230V nd 240V on Ozito chrgers re interchngele for Austrli nd New Zelnd. This tools chrger is doule insulted; therefore no erth wire is required. If the supply cord is dmged, it must e replced y n electricin or power tool repirer in order to void hzrd. Note: Doule insultion does not tke the plce of norml sfety precutions when operting this tool. The insultion system is for dded protection ginst injury resulting from possile electricl insultion filure within the tool. The power supply for this products chrger should e protected y residul current device (rted t 30mA or less). A residul current device reduces the risk of electric shock. GENERAL POWER TOOL SAFETY WARNINGS WARNING! Red ll sfety wrnings nd ll instructions. Filure to follow the wrnings nd instructions my result in electric shock, fire nd/or serious injury. Sve ll wrnings nd instructions for future reference. The term power tool in the wrnings refers to your s-operted (corded) power tool or ttery-operted (cordless) power tool. 1. Work re sfety. Keep work re clen nd well lit. Cluttered or drk res invite ccidents.. Do not operte power tools in explosive tmospheres, such s in the presence of flmmle liquids, gses or dust. Power tools crete sprks which my ignite the dust or fumes. c. Keep children nd ystnders wy while operting power tool. Distrctions cn cuse you to lose control. 2. Electricl sfety. Power tool plugs must mtch the outlet. Never modify the plug in ny wy. Do not use ny dpter plugs with erthed (grounded) power tools. Unmodified plugs nd mtching outlets will reduce risk of electric shock.. Avoid ody contct with erthed or grounded surfces, such s pipes, rditors, rnges nd refrigertors. There is n incresed risk of electric shock if your ody is erthed or grounded. c. Do not expose power tools to rin or wet conditions. Wter entering power tool will increse the risk of electric shock. d. Do not use the cord. Never use the cord for crrying, pulling or unplugging the power tool. Keep cord wy from het, oil, shrp edges or moving prts. Dmged or entngled cords increse the risk of electric shock. e. When operting power tool outdoors, use n extension cord suitle for outdoor use. Use of cord suitle for outdoor use reduces the risk of electric shock. f. If operting power tool in dmp loction is unvoidle, use residul current device (RCD) protected supply. Use of n RCD reduces the risk of electric shock. 3. Personl sfety. Sty lert, wtch wht you re doing nd use common sense when operting power tool. Do not use power tool while you re tired or under the influence of drugs, lcohol or mediction. A moment of inttention while operting power tools my result in serious personl injury.. Use personl protective equipment. Alwys wer eye protection. Protective equipment such s dust msk, non-skid sfety shoes, hrd ht, or hering protection used for pproprite conditions will reduce personl injuries. c. Prevent unintentionl strting. Ensure the switch is in the off-position efore connecting to power source nd/or ttery pck, picking up or crrying the tool. Crrying power tools with your finger on the switch or energising power tools tht hve the switch on invites ccidents. d. Remove ny djusting key or wrench efore turning the power tool on. A wrench or key left ttched to rotting prt of the power tool my result in personl injury. e. Do not overrech. Keep proper footing nd lnce t ll times. This enles etter control of the power tool in unexpected situtions. f. Dress properly. Do not wer loose clothing or jewellery. Keep your hir, clothing nd gloves wy from moving prts. Loose clothes, jewellery or long hir cn e cught in moving prts. g. If devices re provided for the connection of dust extrction nd collection fcilities, ensure these re connected nd properly used. Use of dust collection cn reduce dust-relted hzrds. 4. Power tool use nd cre. Do not force the power tool. Use the correct power tool for your ppliction. The correct power tool will do the jo etter nd sfer t the rte for which it ws designed.. Do not use the power tool if the switch does not turn it on nd off. Any power tool tht cnnot e controlled with the switch is dngerous nd must e repired. c. Disconnect the plug from the power source nd/or the ttery pck from the power tool efore mking ny djustments, chnging ccessories, or storing power tools. Such preventive sfety mesures reduce the risk of strting the power tool ccidentlly. d. Store idle power tools out of the rech of children nd do not llow persons unfmilir with the power tool or these instructions to operte the power tool. Power tools re dngerous in the hnds of untrined users. e. Mintin power tools. Check for mislignment or inding of moving prts, rekge of prts nd ny other condition tht my ffect the power tool s opertion. If dmged, hve the power tool repired efore use. Mny ccidents re cused y poorly tined power tools. f. Keep cutting tools shrp nd clen. Properly tined cutting tools with shrp cutting edges re less likely to ind nd re esier to control. g. Use the power tool, ccessories nd tool its etc. in ccordnce with these instructions, tking into ccount the working conditions nd the work to e performed. Use of the power tool for opertions different from those intended could result in hzrdous sitution. 5. Bttery tool use nd cre. Rechrge only with the chrger specified y the mnufcturer. A chrger tht is suitle for one type of ttery pck my crete risk of fire when used with nother ttery pck.. Use power tools only with specificlly designted ttery pcks. Use of ny other ttery pcks my crete risk of injury nd fire. c. When ttery pck is not in use, keep it wy from other metl ojects, like pper clips, coins, keys, nils, screws or other smll metl ojects, tht cn mke connection from one terl to nother. Shorting the ttery terls together my cuse urns or fire. d. Under usive conditions, liquid my e ejected from the ttery; void contct. If contct ccidentlly occurs, flush with wter. If liquid contcts eyes, dditionlly seek medicl help. Liquid ejected from the ttery my cuse irrittion or urns. 6. Service. Hve your power tool serviced y qulified repir person using only identicl replcement prts. This will ensure tht the sfety of the power tool is tined. POLE PRUNER SAFETY WARNINGS This pplince is not intended for use y persons (including children) with reduced physicl, sensory or mentl cpilities, or lck of experience nd knowledge, unless they hve een given supervision or instruction concerning use of the pplince y person responsile for their sfety. Young children should e supervised to ensure tht they do not ply with the pplince. Recommendtions for the use of residul current device with rted residul current of 30mA or less. Keep ll prts of the ody wy from the sw chin when the chin sw is operting. Before you strt the chin sw, mke sure the sw chin is not contcting nything. A moment of inttention while operting chin sws my cuse entnglement of your clothing or ody with the sw chin. Alwys hold the chin sw with your right hnd on the rer hndle nd your left hnd on the front hndle. Holding the chin sw with reversed hnd configurtion increses the risk of personl injury nd should never e done. Wer sfety glsses nd hering protection. Further protective equipment for hed, hnds, legs nd feet is recommended. Adequte protective clothing will reduce personl injury y flying deris or ccidentl contct with the sw chin. Do not operte chin sw in tree. Opertion of chin sw while up in tree my result in personl injury. Alwys keep proper footing nd operte the chin sw only when stnding on fixed, secure nd level surfce. Slippery or unstle surfces such s ldders my cuse loss of lnce or control of the chin sw. When cutting lim tht is under tension e lert for spring ck. When the tension in the wood fires is relesed the spring loded lim my strike the opertor nd/or throw the chin sw out of control. Use extreme cution when cutting rush nd splings. The slender mteril my ctch the sw chin nd e whipped towrd you or pull you off lnce. Crry the chin sw y the front hndle with the chin sw switched off nd wy from your ody. When trnsporting or storing the chin sw lwys fit the guide r cover. Proper hndling of the chin sw will reduce the likelihood of ccidentl contct with the moving sw chin. Follow instructions for luricting, chin tensioning nd chnging ccessories. Improperly tensioned or luricted chin my either rek or increse the chnce for kickck. Keep hndles dry, clen, nd free from oil nd grese. Gresy, oily hndles re slippery cusing loss of control. Cut wood only. Do not use chin sw for purposes not intended. For exmple: do not use chin sw for cutting plstic, msonry or non-wood uilding mterils. Use of the chin sw for opertions different thn intended could result in hzrdous Kickck Kickck my occur when the nose or tip of the guide r touches n oject, or when the wood closes in nd pinches the sw chin in the cut. Tip contct in some cses my cuse sudden reverse rection, kicking the guide r up nd ck towrds the opertor. Pinching the sw chin long the top of the guide r my push the guide r rpidly ck towrds the opertor. Either of these rections my cuse you to lose control of the sw which could result in serious personl injury. Do not rely exclusively upon the sfety devices uilt into your sw. As chin sw user, you should tke severl steps to keep your cutting jos free from ccident or injury. Kickck is the result of tool misuse nd/or incorrect operting procedures or conditions nd cn e voided y tking proper precutions s given elow: Mintin firm grip, with thums nd fingers encircling the chin sw hndles, with oth hnds on the sw nd position your ody nd rm to llow you to resist kickck forces. Kickck forces cn e controlled y the opertor, if proper precutions re tken. Do not let go of the chin sw. Do not overrech nd do not cut ove shoulder height. This helps prevent unintended tip contct nd enles etter control of the chin sw in unexpected situtions. Only use replcement rs nd chins specified y the mnufcturer. Incorrect replcement rs nd chins my cuse chin rekge nd/or kickck. Follow the mnufcturer s shrpening nd tennce instructions for the sw chin. Decresing the depth guge height cn led to incresed kickck. Push Bck Push ck will occur if n ttempt is mde to sw with the top of the guide r, if the chin touches ginst rigid oject nd jms in the cut. Pull Forwrd If the ucking spikes re not set ginst the timer, the chin t the ottom of the guide r will pull the sw forwrd; this cn jm the chin in the timer. To void this lwys hve the ucking spikes set ginst the timer when perforg cut.
BATTERY SAFETY WARNINGS THIS MANUAL CONTAINS IMPORTANT SAFETY AND OPERATING INSTRUCTIONS FOR YOUR BATTERY CHARGER. 2.0Ah BATTERY INSTRUCTION MANUAL SPECIFICATIONS Input: 18V Bttery Power: 2.0Ah Li-ion Chrge Times: 40 (Multi Bttery Chrger) 40 (Fst Chrger) 80 (Stndrd Chrger) 2.5Hr (Eco Chrger) Weight: 0.40kg ozito.com.u 1. Bttery 2. Bttery Relese Button 3. Chrge Indictor Button 1 2 3 DESCRIPTION OF SYMBOLS PXBP-200 1. Before using the chrger red ll instructions nd cutionry mrkings on the chrger, ttery pck nd the product using the ttery pck. 2. This chrger is not intended for ny uses other thn chrging rechrgele tteries. Any other use my result in risk of fire, electric shock or electrocution. 3. Do not plce ny oject on top of the chrger or plce the chrger on soft surfce tht my result in excessive internl het. Plce the chrger in position wy from ny het source. 4. To reduce risk of dmge to the electric plug nd cord, pull y the plug rther thn the cord when disconnecting the chrger. 5. Mke sure the cord is locted so tht it will not e stepped on, tripped over, or otherwise sujected to dmge or stress. 6. An extension cord should not e used unless solutely necessry. Use of n improper extension cord could result in the risk of fire, electric shock or electrocution. 7. Do not operte the chrger if it hs received shrp low, een dropped or otherwise dmged in ny wy. Hve it checked y n electricin or power tool repirer. 8. Do not disssemle chrger. Tke it to n electricin or power tool repirer when service or repir is required. Incorrect ressemly my result in risk of electric shock, electrocution or fire. 9. To reduce risk of electric shock, unplug the chrger from the outlet efore ttempting ny clening. Removing the ttery pck will not reduce this risk. 10. Never ttempt to connect 2 chrgers together. 11. DO NOT store or use the tool nd ttery pck in loctions where the temperture my rech or exceed 40ºC (such s inside sheds or metl uildings in summer). 12. The chrger is designed to operte on stndrd household electricl power (240 volts). Do not ttempt to use it on ny other voltge! 13. The ttery pck is not fully chrged out of the crton. First red the sfety instructions nd then follow the chrging notes nd procedures. 14. The longest life nd est performnce cn e otined if the ttery pck is chrged when the ir temperture is etween 18-24ºC. Do not chrge the ttery pck in n ir temperture elow 10ºC or ove 40ºC. This is importnt nd will prevent dmge to the ttery pck. 15. Do not incinerte the ttery pck even if it is seriously dmged or is completely worn out. The ttery cn explode in fire. 16. Never ttempt to open the ttery pck for ny reson. If the plstic housing of the ttery pck reks or crcks, immeditely discontinue use nd do not rechrge. 17. During chrging, the ttery must e plced in well ventilted re. ELECTRICAL SAFETY WARNING! When using s-powered tools, sic sfety precutions, including the following, should lwys e followed to reduce risk of fire, electric shock, personl injury nd mteril dmge. Red the whole mnul crefully nd mke sure you know how to switch the tool off in n emergency, efore operting the tool. Sve these instructions nd other documents supplied with this tool for future reference. Note: The supply of 230V nd 240V on Ozito tools re interchngele for Austrli nd New Zelnd. V Volts Hz Hertz This tools chrger is doule insulted, therefore no erth wire is required. c/~ dc ma Alternting Current Direct Current Millimperes Lithium Ion Bttery Recycle Bttery Do not incinerte Wtts Amp Hour Wrning Do not use or store ttery in tempertures exceeding 50ºC CARING FOR THE ENVIRONMENT W Ah Do not put in the ruish Do not get ttery wet Power tools tht re no longer usle should not e disposed of with household wste ut in n environmentlly friendly wy. Plese recycle where fcilities exist. Check with your locl council uthority for recycling dvice. If the supply cord is dmged, it must e replced y the mnufcturer, its service gent or similrly qulified persons in order to void hzrd. Note: Doule insultion does not tke the plce of norml sfety precutions when operting this tool. The insultion system is for dded protection ginst injury resulting from possile electricl insultion filure within the tool. Using n Extension Led Alwys use n pproved extension led suitle for the power input of this tool. Before use, inspect the extension led for signs of dmge, wer nd geing. Replce the extension led if dmged or defective. When using n extension led on reel, lwys unwind the led completely. Use of n extension led not suitle for the power input of the tool or which is dmged or defective my result in risk of fire nd electric shock. To reduce the risk of electric shock, we recommend the use of residul current device (rted 30mA or less). This pplince is not intended for use y persons (including children) with reduced physicl, sensory or mentl cpilities, or lck of experience nd knowledge, unless they hve een given supervision or instruction concerning use of the pplince y person responsile for their sfety. Children should e supervised to ensure tht they do not ply with the pplince. Recycling pckging reduces the need for lndfill nd rw mterils. Reuse of recycled mteril decreses pollution in the environment. Plese recycle pckging where fcilities exist. Check with your locl council uthority for recycling dvice.
1. OPERATION WARRANTY Only use the ttery pck with Ozito Power X Chnge 18V cordless products. CHARGING YOUR LITHIUM ION BATTERY This ttery hs een shipped in low chrge condition, nd requires chrging prior to use. Allow severl cycles of chrging nd dischrging (through use with comptile tool) for the ttery to rech its optimum performnce / runtime. This ttery is comptile with chrgers from the 18V Ozito Power X Chnge rnge ville through your locl Bunnings Wrehouse: Product vilility my differ. PXMBC-002 Multi Bttery Chrger PXCG-030 Fst Chrger PXCG-060 Stndrd Chrger PXCG-120 Eco Chrger 1. Insert the power plug of the chrger into the s socket outlet. The green LED will egin to flsh when properly connected to power supply. 2. Insert the ttery pck into the ttery chrger. 3. Remove ttery from the chrger once fully chrged. Disconnect the chrger from the power supply. Note: The ttery pck cn ecome little wrm during the chrging. This is norml If the ttery pck fils to chrge, check: if there is voltge t the socket outlet tht the ttery nd chrger re properly connected. If the ttery pck still fils to chrge, plese contct our customer service center. BATTERY CHARGE INDICATOR The purchsed ttery is equipped with ttery chrge indictor to show the stte of the ttery chrge. Press the chrge indictor utton nd look to see which LED lights. Bttery requires immedite chrging Low stte of chrge, requires chrging soon. Mid stte of chrge Full stte of chrge. IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY YOU MUST RETURN THE PRODUCT TO YOUR NEAREST BUNNINGS WAREHOUSE WITH YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO RETURNING YOUR PRODUCT FOR WARRANTY PLEASE TELEPHONE OUR CUSTOMER SERVICE HELPLINE: Austrli 1800 069 486 New Zelnd 0508 069 486 TO ENSURE A SPEEDY RESPONSE PLEASE HAVE THE MODEL NUMBER AND DATE OF PURCHASE AVAILABLE. A CUSTOMER SERVICE REPRESENTATIVE WILL TAKE YOUR CALL AND ANSWER ANY QUESTIONS YOU MAY HAVE RELATING TO THE WARRANTY POLICY OR PROCEDURE. The enefits provided under this wrrnty re in ddition to other rights nd remedies which re ville to you t lw. Our goods come with gurntees tht cnnot e excluded t lw. You re entitled to replcement or refund for mjor filure nd for compenstion for ny other resonly foreseele loss or dmge. You re lso entitled to hve the goods repired or replced if the goods fil to e of cceptle qulity nd the filure does not mount to mjor filure. Generlly you will e responsile for ll costs ssocited with clim under this wrrnty, however, where you hve suffered ny dditionl direct loss s result of defective product you my e le to clim such expenses y contcting our customer service helpline ove. 36 MONTH REPLACEMENT WARRANTY Your product is gurnteed for period of 36 months from the originl dte of purchse nd is intended for DIY (Do It Yourself) use only. If product is defective it will e replced in ccordnce with the terms of this wrrnty. Wrrnty excludes consumle prts. WARNING The following ctions will result in the wrrnty eing void. If the tool hs een operted on supply voltge other thn tht specified on the tool. If the tool shows signs of dmge or defects cused y or resulting from use, ccidents or ltertions. Filure to perform tennce s set out within the instruction mnul. If the tool is disssemled or tmpered with in ny wy. Note: The ttery needs to e removed from the tool to check the stte of chrge. BATTERY PROTECTION SYSTEM The tool is equipped with ttery protection system, which helps to ensure longevity of the ttery. The output power utomticlly cuts off during opertion when the tool nd/or ttery re plced under the following situtions: When the tool is overloded: If this occurs, relese the trigger switch nd remove cuses of overlod, then pull the switch trigger gin to restrt. When the reing ttery cpcity ecomes low: Rechrge the ttery pck. Note: The ttery protection system does not in ny wy dmge the tool. Note: The indicted cpcity my e lower thn the ctul level during use or immeditely fter using the tool. ONLINE MANUAL Scn this QR Code with your moile device to tke you to the online mnul. 0318 OZITO Austrli/New Zelnd (Hed Office) 1-23 Letcon Drive, Bngholme, Victori, Austrli 3175. PXBP-200
CHARGER SAFETY WARNINGS THIS MANUAL CONTAINS IMPORTANT SAFETY AND OPERATING INSTRUCTIONS FOR YOUR BATTERY CHARGER. ECO CHARGER INSTRUCTION MANUAL SPECIFICATIONS Input: Output: Bttery Chrge Time: ozito.com.u 100-240V AC 50/60Hz 21V DC, 800mA 2.0Hrs - PXBP-150 (18V 1.5Ah) 2.5Hrs - PXBP-200 (18V 2.0Ah) 4.0Hrs - PXBP-300 (18V 3.0Ah) 5.0Hrs - PXBP-400 (18V 4.0Ah) 6.5Hrs - PXBP-520 (18V 5.2Ah) 1. Before using the chrger red ll instructions nd cutionry mrkings on the chrger, ttery pck nd the product using the ttery pck. 2. This chrger is not intended for ny uses other thn chrging rechrgele tteries. Any other use my result in risk of fire, electric shock or electrocution. 3. Do not plce ny oject on top of the chrger or plce the chrger on soft surfce tht my result in excessive internl het. Plce the chrger in position wy from ny het source. 4. To reduce risk of dmge to the electric plug nd cord, pull y the plug rther thn the cord when disconnecting the chrger. 5. Mke sure the cord is locted so tht it will not e stepped on, tripped over, or otherwise sujected to dmge or stress. 6. An extension cord should not e used unless solutely necessry. Use of n improper extension cord could result in the risk of fire, electric shock or electrocution. 7. Do not operte the chrger if it hs received shrp low, een dropped or otherwise dmged in ny wy. Hve it checked y n electricin or power tool repirer. 8. Do not disssemle chrger. Tke it to n electricin or power tool repirer when service or repir is required. Incorrect ressemly my result in risk of electric shock, electrocution or fire. 9. To reduce risk of electric shock, unplug the chrger from the outlet efore ttempting ny clening. Removing the ttery pck will not reduce this risk. 10. Never ttempt to connect 2 chrgers together. 11. DO NOT store or use the tool nd ttery pck in loctions where the temperture my rech or exceed 40ºC (such s inside sheds or metl uildings in summer). 12. The chrger is designed to operte on stndrd household electricl power (240 volts). Do not ttempt to use it on ny other voltge! 13. The ttery pck is not fully chrged out of the crton. First red the sfety instructions nd then follow the chrging notes nd procedures. 14. The longest life nd est performnce cn e otined if the ttery pck is chrged when the ir temperture is etween 18-24ºC. Do not chrge the ttery pck in n ir temperture elow 10ºC or ove 40ºC. This is importnt nd will prevent dmge to the ttery pck. 15. Do not incinerte the ttery pck even if it is seriously dmged or is completely worn out. The ttery cn explode in fire. 16. Never ttempt to open the ttery pck for ny reson. If the plstic housing of the ttery pck reks or crcks, immeditely discontinue use nd do not rechrge. 17. During chrging, the ttery must e plced in well ventilted re. 1. Chrging Crdle 2. Chrging Adptor 1 2 ELECTRICAL SAFETY DESCRIPTION OF SYMBOLS V A Volts Amps Red instruction mnul Regultor complince mrk Therml cut out protection Hz Ah Hertz Amp Hour Doule insulted Indoor use only Do not dispose of in ruish CARING FOR THE ENVIRONMENT PXCG-120 Power tools tht re no longer usle should not e disposed of with household wste ut in n environmentlly friendly wy. Plese recycle where fcilities exist. Check with your locl council uthority for recycling dvice. Recycling pckging reduces the need for lndfill nd rw mterils. Reuse of recycled mteril decreses pollution in the environment. Plese recycle pckging where fcilities exist. Check with your locl council uthority for recycling dvice. WARNING! When using s-powered tools, sic sfety precutions, including the following, should lwys e followed to reduce risk of fire, electric shock, personl injury nd mteril dmge. Red the whole mnul crefully nd mke sure you know how to switch the tool off in n emergency, efore operting the tool. Sve these instructions nd other documents supplied with this tool for future reference. Note: The supply of 230V nd 240V on Ozito tools re interchngele for Austrli nd New Zelnd. This tools chrger is doule insulted in ccordnce with AS/NZS 60335.1 therefore no erth wire is required. If the supply cord is dmged, it must e replced y the mnufcturer, its service gent or similrly qulified persons in order to void hzrd. Note: Doule insultion does not tke the plce of norml sfety precutions when operting this tool. The insultion system is for dded protection ginst injury resulting from possile electricl insultion filure within the tool. Using n Extension Led Alwys use n pproved extension led suitle for the power input of this tool. Before use, inspect the extension led for signs of dmge, wer nd geing. Replce the extension led if dmged or defective. When using n extension led on reel, lwys unwind the led completely. Use of n extension led not suitle for the power input of the tool or which is dmged or defective my result in risk of fire nd electric shock. To reduce the risk of electric shock, we recommend the use of residul current device (rted 30mA or less). This pplince is not intended for use y persons (including children) with reduced physicl, sensory or mentl cpilities, or lck of experience nd knowledge, unless they hve een given supervision or instruction concerning use of the pplince y person responsile for their sfety. Children should e supervised to ensure tht they do not ply with the pplince. ONLINE MANUAL Scn this QR Code with your moile device to tke you to the online mnul.
1. CHARGING A BATTERY 2. MAINTENANCE CAUTION: THE CHARGER SHOULD BE PROTECTED BY A RESIDUAL CURRENT DEVICE (RATED AT 30MA OR LESS). 1 Connect the chrger into s power outlet. 2 The chrger LED will flsh green showing power is eing supplied to the chrger. 3 With the ttery sitting on flt surfce, lign the rised ris on the ttery with the recess in the chrger nd slide onto the ttery ensuring firm connection. Disconnect the chrger from power source efore clening. Keep the chrger in dry plce out of rech of children. If the enclosure of the chrger requires clening, do not use solvents. Use dry, soft cloth only to wipe down the surfce. Never let ny liquid get inside the chrger; never immerse ny prt of the drill into chrger. There re no other prts inside the chrger which require tennce.do not tke the chrger prt. If the chrger is dmged, contct your supplier or the mnufcturer. WARRANTY IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY YOU MUST RETURN THE PRODUCT TO YOUR NEAREST BUNNINGS WAREHOUSE WITH YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO RETURNING YOUR PRODUCT FOR WARRANTY PLEASE TELEPHONE OUR CUSTOMER SERVICE HELPLINE: Austrli 1800 069 486 New Zelnd 0508 069 486 4 The chrger LED will illute red signifying tht the ttery is chrging. Note: The ttery will not develop memory, it does not hve to e fully dischrged efore rechrging TO ENSURE A SPEEDY RESPONSE PLEASE HAVE THE MODEL NUMBER AND DATE OF PURCHASE AVAILABLE. A CUSTOMER SERVICE REPRESENTATIVE WILL TAKE YOUR CALL AND ANSWER ANY QUESTIONS YOU MAY HAVE RELATING TO THE WARRANTY POLICY OR PROCEDURE. 5 When removing the chrger from the ttery, first press the ttery relese t, then slide the chrger from its position. The enefits provided under this wrrnty re in ddition to other rights nd remedies which re ville to you t lw. Our goods come with gurntees tht cnnot e excluded t lw. You re entitled to replcement or refund for mjor filure nd for compenstion for ny other resonly foreseele loss or dmge. You re lso entitled to hve the goods repired or replced if the goods fil to e of cceptle qulity nd the filure does not mount to mjor filure. Generlly you will e responsile for ll costs ssocited with clim under this wrrnty, however, where you hve suffered ny dditionl direct loss s result of defective product you my e le to clim such expenses y contcting our customer service helpline ove. Chrger LED Indictor LED Indictor GREEN (Flshing) RED (Illuted) GREEN (Illuted) RED (Flshing) RED & GREEN (Flshing) Sitution Stnd By (no ttery pck is inserted) Bttery is chrging (low chrge) Bttery is fully chrged Bttery or Chrger fult Bttery pck is too hot or too cold (remove ttery from chrger nd store t room temperture 20ºC. Insert ttery gin when t correct chrging temperture). If this hppens gin, the ttery is defective nd needs to e replced. 36 MONTH REPLACEMENT WARRANTY Your product is gurnteed for period of 36 months from the originl dte of purchse nd is intended for DIY (Do It Yourself) use only. If product is defective it will e replced in ccordnce with the terms of this wrrnty. Wrrnty excludes consumle prts. WARNING The following ctions will result in the wrrnty eing void. If the tool hs een operted on supply voltge other thn tht specified on the tool. If the tool shows signs of dmge or defects cused y or resulting from use, ccidents or ltertions. Filure to perform tennce s set out within the instruction mnul. If the tool is disssemled or tmpered with in ny wy. OZITO Austrli/New Zelnd (Hed Office) 1-23 Letcon Drive, Bngholme, Victori, Austrli 3175. PXCG-120