Printed on Cocoon Silk. Made with 100% FSC postconsumer waste. Cocoon Silk is 100% FSC recycled paper, process chlorine free. Please read and recycle Siemens Intelligent Traffic Systems Sopers Lane Poole Dorset BH17 7ER Tel: +44 (0) 1202 782000 Email: sales.stc@siemens.com All hardware and software names used are brand names and/or trademarks of their respective holders. Siemens 2016. Right of modifications reserved. Printed in the UK This publication is issued to provide outline information only, which (unless agreed by the Company in writing) may not be used, applied or reproduced for any purpose or form part of any order or contract or be regarded as a representation relating to the products or service concerned. The Company reserves the right to alter without notice this specification, design, price or conditions of supply of any product or service. Intelligent Traffic Systems: Siemens.co.uk/traffic
The Siemens range of traffic signal poles meet the requirements of the Construction Products Regulations and offer poles from 2m to 8m in a variety of forms, suitable for use with retention sockets and also in planted root applications. Every pole is CE marked and is supplied with strength and material information as required by BS EN 12899. Full range of pole types and lengths Steel and Aluminium versions Standard and lowlevel access versions Suitable for use with retention sockets and planted root applications Compliant with BS EN 12899 and CE marked Excel based pole selection tools to aid intersection design Compliant with the Construction Products Regulations The Siemens pole range is fully compliant with Construction Products Regulations, which applies to traffic signals and signposts. Supported by extensive wind tunnel testing undertaken by Siemens, to evaluate the real loads experienced by traffic signals poles when fully equipped, each pole has been characterised to ensure it is not overloaded either during initial installation or as part of future junction improvements. 2 In compliance with the regulations each pole has also been independently verified, is individually CE marked and carries a unique specification label confirming key features, including construction material, corrosion resistance and strength characteristics. Full range of types lengths and materials Supports retention socket and planted root installation A full range of pole types and lengths are supported within the standard range of poles supplied by Siemens. These include straight poles, formed poles (typically used at pedestrian crossings), belled poles and low level access types, which maintain a standard 114mm mounting diameter. The pole range has been specifically designed to ensure that signal head mounting heights remain constant irrespective of the type of planting method used. Poles are available for use with NAL retention sockets and also where direct planting into a suitable concrete foundation is required. Different methods can be used across a single site if necessary and the signals will always be presented to drivers and pedestrians at the same height above ground level. The range also supports a variety of pole colours including, black, grey or galvanised finish. Other colours are able to be supported if required for specific schemes, subject to minimum order quantities. Poles are available in steel and aluminium. The aluminium pole types offer improved corrosion resistance, longer life and are up to 50% lighter than the equivalent steel poles, improving health and safety by considerably easing manual handling tasks. Where formed poles are used, these raise the signal height above that normally used in straight pole applications, to ensure that the required, as defined in LTN 1/98, is maintained. The Siemens pole range also includes longer straight poles which match the signal head mounting heights presented by the formed poles, for use with both planted roots and retention socket. Wide range of signal mounting brackets A wide range of standard steel mounting brackets are provided, catering for single, two, three and four aspect signals. These are suitable for most typical applications. Where extra corrosion resistance is desirable, for example in areas where environmental conditions are particularly harsh, stainless steel brackets are available as an alternative. These are provided with special bracket to pole mounting kits which include insulators to avoid problems which might occur due to galvanic corrosion caused by the use of dissimilar metals. 3
Design tools and cross reference aids Pole options Each of the available pole types are listed in the following tables arranged by type, material andinground mounting method. To help with pole selection and verification two excel based tools and a detailed handbook are available for the pole range, which are available from the Siemens website. Pole part numbers are constructed by using the basic part number (for example 667/2/52711/ETC) and replacing the /ETC with the pole variant from the table for the specific pole required. The Pole Selection Tool: This allows basic requirements for poles to be entered, length, material, form etc...and the tool will suggest the pole that most closely matches the requirements and will give full details of the pole including its Siemens part number. 4 Dacrylate Silver (RAL9006) Pole Pole Variant 667/2/52711/ETC The Pole Handbook: This provides full details of the pole range as well as important information regarding equipment which can be mounted on the poles, maximum load configurations and also how to safely and reliably shorten poles if this is needed on a specific site basis. Straight Steel Poles for Sockets The Pole Comparison Tool: If the old Siemens part number for a particular pole is known this may be entered into the tool and the nearest new equivalent pole part number will be provided. Usually the poles will be directly equivalent to one another but if there are slight differences, for example minor variations in length, this will be highlighted as part of the comparison process. /180 /181 /182 1825 300 115/ 16 Stub pole /200 /201 /202 /203 1975 17 Stub pole for repeater /290 /291 /292 2975 25 Standard Signal Pole /390 /391 /392 /393 3840 32 Pedestrian Signal Pole /420 /421 /422 4200 35 2660 5m Pole /490 /491 /492 4840.2 43 3300 13.35 10.49 6m Pole /580 /581 /582 5800 600 115/750.2 51 4110 13.35 10.49 6m Pedestrian Pole /585 /586 /587 5800 600 115/750.2 51 2660 4110 13.35 10.49 6m Pole (High ) /590 /591 /592 5800 600 115/750 114.3x5 79 4110 20.20 15.86 7m Pole /680 /681 /682 6750 750 115/900 114.3x5 91 4910 20.20 15.86 8m Pole /780 /781 /782 7750 750 115/900 114.3x5 105 5910 20.20 15.86 5
Straight Steel Poles for Planted Roots Formed Steel Poles for Sockets & Planted Roots Pole Variant 667/2/52710/ETC Socket Pole Variant 667/2/52721/ETC Pole NOT AVAILABLE FOR PLANTED ROOT SEE RETENTION SOCKET VARIANTS Stub pole /220 /221 /222 2135 610 18 Steel Formed Signal Pole Aluminium Formed Signal Pole Pole /420 /421 /422 4200.2 39 2660 13.35 10.49 NOT CURRENTLY AVAILABLE FOR ALUMINIUM POLES SEE STEEL VARIANTS Stub pole for repeater NOT AVAILABLE FOR PLANTED ROOT SEE RETENTION SOCKET VARIANTS Standard Signal Pole /400 /401 /402 4000 610 33 Pedestrian Signal Pole /440 /441 /442 4360 610 36 2660 Planted Root 5m Pole /500 /501 /502 5000 610.2 44 3300 13.35 10.49 6m Pole /600 /601 /602 6000 800.2 53 4110 13.35 10.49 Pole Variant 667/2/52720/ETC 6m Pedestrian Pole /605 /606 /607 6000 800.2 53 2660 4110 13.35 10.49 6m Pole (High ) /610 /611 /612 6000 800 114.3x5 81 4110 20.20 15.86 7m Pole /700 /701 /702 7000 1000 114.3x5 95 4910 20.20 15.86 8m Pole /800 /801 /802 8000 1000 114.3x5 108 5910 20.20 15.86 Stub pole /440 /441 /442 4360 610.2 41 2660 13.35 10.49 Pole Straight Aluminium Poles for Sockets Pole Variant 667/2/47908/ETC Pole Formed Steel Belled (Low Level Access) Poles for Sockets Stub pole /200 /201 1975 114.7x5 10 11.26 8.84 Pole Variant at at at Upper section Stub pole for repeater Standard Signal Pole /390 /391 3840 114.7x5 18 11.26 8.84 Pedestrian Signal Pole /420 /421 4200 114.7x5 20 2660 11.26 8.84 5m Pole 6m Pole /580 /581 5800 600 115/750 114.7x5 27 4110 11.26 8.84 6m Pedestrian Pole /585 /586 5800 600 115/750 114.7x5 27 2660 4110 11.26 8.84 6m Pole (High ) 7m Pole Left (L) Formed Belled (L) 667/2/52723/ETC Formed Belled (R) 667/2/52725/ETC Formed LLAP (L) 667/2/46612 /ETC Mid Pole /430 /431 /432 4280 530 168/750 168.3x3.6.2 49 2660 31.20 25.93 15.38 3.05 13.35 10.49 /430 /431 /432 4280 530 168/750 168.3x3.6.2 49 2660 31.20 25.93 15.38 3.05 13.35 10.49 /420 /421 /422 4230 114.3x5 168.3x5.2 53 2660.5 20.20 15.86 23.42 3.95 13.35 10.49 Right (R) 8m Pole Formed LLAP (R) 667/2/46611 /ETC /420 /421 /422 4230 114.3x5 168.3x5.2 53 2660.5 20.20 15.86 23.42 3.95 13.35 10.49 6 7
Formed Steel Belled Poles for Planted Roots Straight Steel Belled Pole for Planted Root Pole Variant 667/2/52730/ETC Left (L) Pole Variant Mid Pole at at at Upper section Right (R) Thickness (m) Moment (knm Stub pole /220 /221 /222 2135 610 168.3x3.6.2 28 31.20 25.93 15.38 3.05 13.35 10.49 Moment (knm Moment (knm Formed Belled (L) 667/2/52722/ETC Formed Belled (R) 667/2/52724/ETC /440 /441 /442 4360 610 168.3x3.6.2 50 2660 31.20 25.93 15.38 3.05 13.35 10.49 /440 /441 /442 4360 610 168.3x3.6.2 50 2660 31.20 25.93 15.38 3.05 13.35 10.49 Stub pole repeater Std Signal Pole /400 /401 /402 4000 610 168.3x3.6.2 45 31.20 25.93 15.38 3.05 13.35 10.49 Ped Signal Pole /440 /441 /442 4360 610 168.3x3.6.2 48 2660 31.20 25.93 15.38 3.05 13.35 10.49 5m Pole /500 /501 /502 5000 610 168.3x3.6 114.3x5 70 3300 31.20 25.93 15.38 3.05 20.20 15.86 6m Pole /620 /621 /622 6200 1000 168.3x5 114.3x5 97 4110 45.08 35.41 23.81 4.37 20.20 15.86 6m Ped Pole /625 /626 /627 6200 1000 168.3x5 114.3x5 97 2660 4110 45.08 35.41 23.81 4.37 20.20 15.86 6m Pole (High ) 7m Pole /720 /721 /722 7200 1200 168.3x5 114.3x5 112 4910 45.08 35.41 23.81 4.37 20.20 15.86 8m Pole /820 /821 /822 8200 1200 168.3x5 114.3x5 125 5910 45.08 35.41 23.81 4.37 20.20 15.86 Straight Steel Belled Poles for Sockets Straight Steel CCTV Belled Poles for Sockets Pole Variant 667/2/52731/ETC Upper section Length Stub pole /190 /191 /192 1905 380 168/ 600 168.3x3.6.2 25 31.20 25.93 15.38 3.05 13.35 10.49 Stub pole repeater Pole Variant 667/2/52733/ETC Std Signal Pole /390 /391 /392 3920 530 168/ 750 168.3x3.6.2 44 31.20 25.93 15.38 3.05 13.35 10.49 Ped Signal Pole /430 /431 /432 4280 530 168/ 750 168.3x3.6.2 47 2660 31.20 25.93 15.38 3.05 13.35 10.49 5m Pole /490 /491 /492 4920 530 168/ 750 168.3x3.6 114.3x5 69 3300 31.20 25.93 15.38 3.05 20.20 15.86 6m Pole /590 /591 /592 5880 680 168/ 900 168.3x5 114.3x5 91 4110 45.08 35.41 23.81 4.37 20.20 15.86 6m Ped Pole /595 /596 /597 5880 680 168/ 900 168.3x5 114.3x5 91 2660 4110 45.08 35.41 23.81 4.37 20.20 15.86 6m Pole (High ) 7m Pole /670 /671 /672 6680 680 168/ 900 168.3x5 114.3x5 101 4910 45.08 35.41 23.81 4.37 20.20 15.86 8m Pole /770 /771 /772 7680 680 168/ 900 168.3x5 114.3x5 115 5910 45.08 35.41 23.81 4.37 20.20 15.86 Thickness 4m Pole /390 /391 /392 3920 530 168/750 168.3x3.6.2 44 31.20 25.93 15.38 3.05 13.35 10.49 5m Pole /490 /491 /492 4920 530 168/750 168.3x3.6 114.3x5 69 31.20 25.93 15.38 3.05 20.20 15.86 6m Pole /590 /591 /592 5880 680 168/900 168.3x5 114.3x5 91 45.08 35.41 23.81 4.37 20.20 15.86 7m Pole /670 /671 /672 6680 680 168/900 168.3x5 114.3x5 101 45.08 35.41 23.81 4.37 20.20 15.86 8m Pole /770 /771 /772 7680 680 168/900 168.3x5 114.3x5 115 45.08 35.41 23.81 4.37 20.20 15.86 8 9
Straight Steel CCTV Belled Pole for Planted Root Bracket Options Signal head brackets/kits Variant Pole Variant 667/2/52732/ETC Thickness 4m Pole /400 /401 /402 4000 610 168.3x3.6.2 45 31.20 25.93 15.38 3.05 13.35 10.49 5m Pole /500 /501 /502 5000 610 168.3x3.6 114.3x5 70 31.20 25.93 15.38 3.05 20.20 15.86 Description Material Base Part Number 2 Aspect 3 Aspect 4 Aspect Signal head bracket (single bracket only) Steel 667/2/30070/ /002 /003 /004 Signal head bracket kit Steel Supplied with signals Signal head bracket (single bracket only) 316 grade S/S 667/2/46162/ /002 /003 /004 Signal head bracket kit 316 grade S/S 667/1/46165/ /002 /003 /004 Plastic Brackets Nylon NOT APPROVED 6m Pole /620 /621 /622 6200 1000 168.3x5 114.3x5 97 45.08 35.41 23.81 4.37 20.20 15.86 7m Pole /720 /721 /722 7200 1200 168.3x5 114.3x5 112 45.08 35.41 23.81 4.37 20.20 15.86 8m Pole /820 /821 /822 8200 1200 168.3x5 114.3x5 125 45.08 35.41 23.81 4.37 20.20 15.86 Signal head extension brackets refer to handbook for limitations Part number 667/1/02442/*** Description Material 300mm Ext 600mm Ext 900mm Ext Traffic signal extension brackets (D brkts) Steel /300 /600 /900 Straight Steel Low Level Access Pole for Socket Sockets Description 115 Socket 168 Socket Pole Variant 667/2/46610/ETC 150mm Socket Spacer 667/2/52719/150 667/2/52718/150 300mm Socket Spacer 667/2/52719/300 667/2/52718/300 Stub pole Stub pole repeater Socket size Mid Pole Dia/ NOT AVAILABLE FOR LOW LEVEL ACCESS POLES SELECT CLOSEST EQUIVALENT NOT AVAILABLE FOR LOW LEVEL ACCESS POLES SELECT CLOSEST EQUIVALENT NOT AVAILABLE FOR LOW LEVEL ACCESS POLES SELECT CLOSEST EQUIVALENT Standard Signal Pole /390 /391 /392 3870 114.3x5 168.3x5.2 45.5 20.20 15.86 23.42 3.95 13.35 10.49 Pedestrian Signal Pole /420 /421 /422 4230 114.3x5 168.3x5.2 48 2660.5 20.20 15.86 23.42 3.95 13.35 10.49 5m Pole NOT AVAILABLE FOR LOW LEVEL ACCESS POLES SELECT CLOSEST EQUIVALENT 6m Pole /580 /581 /582 5830 600 115/750 114.3x5 168.3x5 114.3x5 82.5 4110.5 20.20 15.86 23.42 3.95 20.20 15.86 Standard sockets for use with Diameter 114.3mm Aluminium and Steel Poles Description Part Number Planting Depth Socket Depth RS115x300 Shallow Socket 667/7/52790/300 220 300 RS115x Duckfoot Socket 667/7/52790/ 300 RS115x600 Duckfoot Socket 667/7/52790/600 600 RS115x750 Duckfoot Socket 667/7/52790/750 600 750 RS115x900 Duckfoot Socket 667/7/52790/900 750 900 6m Ped Pole /585 /586 /587 5830 600 115/750 114.3x5 168.3x5 114.3x5 82 2660.5 4110.5 20.20 15.86 23.42 3.95 20.20 15.86 6m Pole (High ) 7m Pole 8m Pole Standard sockets for use with Diameter 168.3mm Belled Steel Poles Description Part Number Planting Depth Socket Depth RS168x300 Shallow Socket 667/7/52792/300 220 300 RS168x600 Duckfoot Socket 667/7/52792/600 380 600 RS168x750 Duckfoot Socket 667/7/52792/750 530 750 RS168x900 Duckfoot Socket 667/7/52792/900 680 900 10 11