Radial, Angular, and 4-point Contact

Transcription

1 , Angular, and -point Contact Thin Section earings Precision-engineered solutions for aerospace, semiconductor, and custom machinery applications. ISO 9001:2000 AS9100:

2 RC earings has had a long tradition of innovation, commitment, and quality since the company was founded in Today, RC earings has grown into a world-class manufacturer of standard and custom-engineered bearings and related products, with a product focus on research, testing, and development of the best product for specific applications. hat e Manufacture RC earings, with facilities throughout North America and Europe, provides bearings and precision products for applications in the construction, mining, material handling, transportation and off-highway equipment, robotics and automation, farming, machine tool, and semiconductor equipment industries. Through RC Aerospace earings, the company is a major manufacturer of highly-engineered bearings and precision products for military, defense, and commercial aerospace applications. RC s high-quality bearings include: Heavy uty Needle Roller earings: Pitchlign caged heavy duty needle roller bearings, inner rings, type TJ TandemRoller bearings for long life. Spherical Plain earings:, angular, contact, high misalignment, extended inner ring, uralube maintenance-free spherical plain bearings, QuadLube long life bearings, ImpactTuff case carburized bearings, ShimPack double-acting angular contact bearings, and CrossLube lubrication groove systems. Cam Followers and Yoke Rollers: Standard stud, heavy stud, yoke type, caged roller followers, RC Roller long life cam followers, HexLube universal cam followers, airframe track rollers. Mastguide rollers and carriage rollers, chain sheaves (for leaf chain), toothless sprockets (for roller chain), and heavy-duty roller bearing construction. Rod Ends: Commercial and aerospace, precision, Mil-Spec series, self-lubricating, inch and metric. Heim, Unibal, and Spherco brands. Self-Lubricating earings:, thrust, rod ends, spherical plain bearings, high temperature, high loads, inch and metric. Fiberglide brand. Thin Section earings: Standard cross sections to one inch. Sizes to 0 inches. Stainless steel and other materials available. Seals available on all sizes and standard cross sections. Airframe Control earings: bearing types, self-lubricating types, needle roller track rollers. Ground, Semiground, and Unground earings: Full complement, utilizes design and burnished races for higher loads, long life, and smooth operation. owel Pins, Loose Needle Rollers, Shafts Tapered Roller and Tapered earings: Case-hardened and through-hardened in a variety of sizes, used in Class 8 heavy truck and trailer wheel bearings, final drive transmissions and gearboxes. RC Thin Section earings RC thin section ball bearings are engineered to solve a variety of design problems that cannot be solved with conventional ball bearings. A bearing is considered a thin section when the bore diameter is greater than four times the radial cross section. ithin any thin section ball bearing series, the cross section remains constant as the bore diameter changes. Typically the cross section is twice the ball diameter, and nominal dimensions are given in inches. Some advantages of RC thin section ball bearings are: Light weight Multi-load capabilities High stiffness Variety of cross sections & sizes Small cross section Modified & custom bearings RC thin section ball bearings are most often found where space limitations, combined loading, and weight restrictions pose unique design requirements. RC also designs and manufactures special thin section ball bearings tailored for specific applications. How e Can Serve You RC has implemented a total quality control system that uses statistical quality control at all facilities, and manufactures in high volume to a just-in-time program. To serve the ongoing needs of customers, RC has a network of over distributors and sales engineers throughout the US, Europe and South America, with authorized agents worldwide. For assistance with your bearing application, contact: arranty Customer Service: RC products are warranted for material and workmanship for a period not to exceed 90 days from shipment and for a value not to exceed purchase price. No other warranty is in effect. isclaimer and Intellectual Property Statement The materials comprising this Catalog are provided by RC earings Incorporated ( RC earings, RC ) as a service to its customers on an as-is basis for informational purposes only. RC assumes no responsibility for any errors or omissions in these materials. RC makes no commitment to update the information contained herein. RC makes no, and expressly disclaims any, representations or warranties, express or implied, regarding the Catalog, including, without limitation, any implied warranties of merchantability or fitness for a particular purpose. RC makes no, and expressly disclaims any, warranties, express or implied, regarding the correctness, accuracy, completeness, timeliness, and reliability of the text, graphics and any other items in the Catalog. Under no circumstances shall RC, its affiliates, or any of its respective partners, officers, directors, employees, agents or representatives be liable for any damages, whether direct, indirect, special or consequential damages for lost revenues, lost profits, or otherwise, arising from or in connection with this Catalog and the materials contained herein. All materials contained in the Catalog are protected by copyright laws, and may not be reproduced, republished, distributed, transmitted, displayed, broadcast or otherwise exploited in any manner without the express prior written permission of RC. TALE OF CONTENTS Part Number esignation Selection Guide Separator Selection Guide 6 Seals, Shields, Lubricants 7 earing Material Comparison 9 K-Series 2100 Steel 10 J-Series Elastomer Molded Sealed earings 28 7 G-Series PTFE/00SS Sealed earings 8 N-Series Thin ense Chrome Coated 6 81 P-Series 17-PH S-Series 0C Stainless Steel Simplex Series Y-PI Series 120 Thermal-Comp 121 Tolerance Tables Engineering ata Typical Applications Availability Chart 1 Notes 12 ata Fax 1 CROSS SECTIONS OF RC THIN SECTION ALL EARINGS Cross Section " " /16" " " " /" 1" Series: KAA KA K KC JU K KF KG Custom esigned earings: RC produces a wide RC s names and logos and all related trademarks (including RC range of custom bearings in various materials for specific ore Size: " " ".0-0.0" ".0-0.0".0-0.0".0-0.0" Part Numbers, Series Numbers, and Cone and Cup Numbers), applications. tradenames, and other intellectual property are the property of RC earings and cannot be used without its express prior written 2 permission. TALE OF CONTENTS

3 RC THIN SECTION ALL EARINGS NUMER ES IG NA TION RC THIN SECTION ALL EARING SELECTION # ESIGNATION EXAMPLE NOMENCLATURE POSITION K A X P 0 Material Series Size Type Separator Precision POSITION 1: Material (& seal/shield options) Material Rings s Seals, Shields A E F G seal - PTFE 2 seals - PTFE 1 shield 2 shields 2 combo - PTFE seal & shield H J K seal - molded rubber 2 seals - molder rubber No seals or shields L C 2 combo - PTFE seal & shield M M-0 No seals or shields N C No seals or shields P 17- PH Ceramic Q 2100 R C S T U V 0C 0C 0C 0C 0C X 2100 Ceramic Y 0C Ceramic Z OTHER POSITION 2: Series Coating No No No No 1 combo - PTFE seal & shield No No No No No Thin ense Chrome No Thin ense Chrome No seals or shields No No seals or shields No No seals or shields Zn Nickel plating No seals or shields No 1 seal - PTFE No 2 seals - PTFE No 2 shields No 2 seals - molded rubber No No seals or shields No Ceramic balls No POSITION 6: Type SEE PAGE POSITION 7: Separators SEE PAGE 6 M* Play 9** POSITION 8: RC Precision Class CLASS ESCRIPTION 0 AEC 1F AEC F AEC F 6 AEC 7F REFERENCE: ANSI/AMA ST 26.2 POSITION,, : Size RC POSITION 6 TYPE LOA CONITION earing Type Contact Axial Reversing Axial Combined, Axial & C Good Fair Poor Fair Poor A Angular Good Very Good o not use o not use o not use X -Point Fair Good Good Good Fair ouble Angular Very Good Very Good Very Good Very Good Good F ouble Angular Very Good Very Good Very Good Very Good Good T ouble Angular Very Good Excellent o not use o not use o not use M ouble Angular Excellent Excellent Excellent Excellent Excellent ouble Angular Excellent Excellent Excellent Excellent Excellent SELECTION GUIE EARING CROSS SECTION ALL IA (d) STANAR ITH AA A C F G IAMETRAL CLEARANCE (POSITIVE RAIAL PLAY) (=2d) EXTENE ITH ().187 HA.200 H I J K.700 M N POSITION 9: earing Assembly Clearance or Tightness RAIAL PRELOA TIGHTNESS (NEGATIVE RAIAL PLAY) A TO K TO K TO L TO L C TO M TO M TO N TO N E TO P TO P F TO R TO R G TO S TO S H TO T TO T I TO U TO U J TO Z PER VARIATION LOG Z O MATCH FOR NORMAL RAIAL PLAY E (>2d) EXTRA EXTENE ITH () SA S T U V X Y EE (>2d) AXIAL PRELOA GAP (UPLEX RG) TO TO TO TO TO TO TO TO TO PER VARIATION LOG ORE SIZE (INCHES) MULTIPLIE Y 10 EXAMPLES: 00 =.00" ORE 07 = 7.0" ORE 20 = 2.00" ORE For more information visit our web site at rbcbearings.com

4 RC THIN SECTION ALL EARING SELECTION PTFE/00SS SEALS VS. ELASTOMER MOLE SEALS POSTION 7: Separators Typical PTFE/00SS esign Typical Elastomer Molded esign Separable Shields SEPARATOR GUIE SEALS & SHIELS Many molded seals used in bearings are made out of nitrile (molded rubber per MIL-R-68). The material has a relatively high coefficient of friction. In order to meet low torque bearing requirements, seal fit-up during installation must be adjusted to minimize contact pressure on the sealing surfaces - reducing torque by reducing sealing effectiveness. The inherent variability in the seal molding process can further aggravate these issues. Over time, torque fluctuations are nearly inevitable since seals may reset or the amount of lube between the seal and the sealing surface may change. ased on these performance characteristics, molded seals are often marginal and unreliable solutions for torque sensitive applications. RC s solution is a combination seal-shield design. The seal is made from either pure PTFE (Teflon ) or glass fiber reinforced PTFE (Armalon ). PTFE is chemically inert, has a very low coefficient of friction (inherent lubricity), and provides the widest operating temperature range of any sealing material. The seal is held in place and shielded with a stainless steel (00 series) flat ring. The seal drag torque in this design is minimal, predictable, and consistent over time. RC invariably recommends this design for ail low torque or torque sensitive applications that require sealing. RC can readily retrofit problematic molded seal designs with a PTFE/00SS optimized solution. For versions that cannot allow a seal, we offer a shield in its place. 6 Teflon is a registered trademark of upont. Armalon is a registered trademark of INACO. 7

5 Material Type EARING MATERIAL COMPARISON K N P S Rings s TC 17- PH 0C SiN 0C Typical Hardness Corrosion Resistance Material Fatique Resistance Fretting Resistance HRc 8-66 HRc H900 HRc 8-6 Poor Good Very Good Good Good Good Poor Good Good Very Good Poor Very Good Perservative Yes May be supplied with or without preservative 8 9

6 11 K-SERIES L o L i to clear f max ( places) Steel Large iameter Light eight Small Cross Section Snap-Over Separator eight LOA RATINGS ,10 1,0 1,10 1,290 2,100,60 8,210 1,70 1,80,190,60 8,210 1,0 1,90 2,0,20,90 8,760 1,20 2,00 2,60,0 6,210 9,00 1,90 2,10 2,90,760 6,90 9,80 2,60 2,80 1,290 2,02,020,10,690,070,00,960,070 6,80,70 9,0 1,700 2,80 6,20 6,090 8,10 9,880 1,190 6,20 6,10 8,670 10,10 1,210 26,80 8, 6,760 9,00 10,90 1,700,620 1,70 7,070 9,60 11,20 16,70 28,870 10,00 12, ,080 1,60 1,10 1,0 2,00 2,0 1,980 2,0,110,90 7,980 12,960 2,70,0,110 8,00 12,960 2,200 2,920,0,60 8,820 1,820 2,10,00,610,620 9,220 1,680 2,20,210,780, 9,600 1,0 2,,00,110 2,10 2,890,87,800 6,90,80 6,810 9,120 10,10 8,810 11,700 1,80 22,020,00 7, 9,00 12,190 1,0 22,70 7,70 7, 9,790 12, 1,00 2,290,20 61,70 10, ,060 2,000 1,010 6,00 10,760 1,280 16,810 26,60 2,700 69,170 11,790 1,70 18, ,020 1,0 1,60 2,20 2,0 1,880 2,680 1, 2,810 2,080 2,90,70 6,20 11,20 19,0 2,110,000,80 6,80 11,810 19,0 2,170,910 6,820 12,200 20,290,110, 6,80 12,90 21,10 2,20,190,00 7,00 12,710 21,90 2,20,280,170,910,0,916 7,00 10,20 7,870 11,170 8,60 11,920 8,80 1 9,20 1,120 16,60 29,000 0,800 86,70 9,0 1,0 17,00 29,0 2,0 86,70 9, 1,700 17,0 0,0,0 90,20 9,880 1,80 17, 0,0,60 9, 9,960 1,190 17, 1,20 6,0 97,60 10,20 1,90 18, ,60 1,20 1,680 2,0 2,720,0 7,80 12,960 1,880,00,860 8,00 1,600 2,810,60,60 9,0 1,200 2,10,700,910 10,10 16,890 2,0,10,060 6,70 11,00 18,,00,070, , ,00 1, ,10 1, ,20 2, ,80 11,80 10,20 8,890 8, 7,0 7,110 6,10 6,00,0,20,710,60,70,0,210,0,80,20,210,210,160,100,60,90,900,60,760,720,60,0,0, ,020 1,290 2,20,90 6, ,00 1,20 2,0,070 6, ,060 1,0 2,0,210 7, ,070 1,70 2,60,10 7, ,0 2,0,80 7, ,10 1,0 1,0 1,60 2,0 2,90,60 2,710,80 2,890,090,10,0,70 10,010 17,0 29,800,20,80,870 10,100 18,100 29,800,0,720 6,010 10,0 18,70 1,10,80,760 6,090 10,00 19,170 2,0,0,890 6,180 10,810 19,80,670,60,00 6, ,070 1,10 1,220 1,90 2,10 2,0,280,870 10,80 19,0 2,70,0 6,20 11,810 20,10 2,060 2,960 6,820 12,810 22,20,10,070 7,180 1,70 2,00 2,0,0,0 7,70 1,620 26,0 2,, ,20 2, ,0 2, ,0 2, ,0 2, , 2, lbs. kg lbf N lbf N lbf N lbf N lbf - in Nm lbf - in Nm 10 RAIAL CONTACT, C-TYPE THIN SECTION ALL EARINGS KAA Series: Cross Section Size: " KA " K /16" KC " K " KF /" KG 1" *NUMER* iameter Outside iameter NOMINAL IMENSIONS Land iameter Li -Inner Ring Lo -Outer Ring ore KAA10CL0*RC KAA1CL0*RC KAA17CL0*RC KA020CP0*RC K020CP0*RC KA02CP0*RC K02CP0*RC KA00CP0*RC K00CP0*RC KA0CP0*RC K0CP0*RC KA00CP0*RC K00CP0*RC KC00CP0*RC K00CP0*RC KF00CP0*RC KG00CP0*RC KA02CP0*RC K02CP0*RC KC02CP0*RC K02CP0*RC KF02CP0*RC KG02CP0*RC KA0CP0*RC K0CP0*RC KC0CP0*RC K0CP0*RC KF0CP0*RC KG0CP0*RC KA07CP0*RC K07CP0*RC KC07CP0*RC K07CP0*RC KF07CP0*RC KG07CP0*RC KA00CP0*RC K00CP0*RC KC00CP0*RC K00CP0*RC KF00CP0*RC KG00CP0*RC KA0CP0*RC K0CP0*RC KC0CP0*RC idth in. mm in. mm in. mm in. mm in. mm in. mm in.

7 1 K-SERIES 12 KAA Series: Cross Section Size: " KA " K /16" KC " K " KF /" KG 1" RAIAL CONTACT, C-TYPE THIN SECTION ALL EARINGS L o L i to clear f max ( places) Steel Large iameter Light eight Small Cross Section Snap-Over Separator *NUMER* eight LOA RATINGS iameter Outside iameter NOMINAL IMENSIONS Land iameter Li -Inner Ring Lo -Outer Ring ore K0CP0*RC KF0CP0*RC KG0CP0*RC KA060CP0*RC K060CP0*RC KC060CP0*RC K060CP0*RC KF060CP0*RC KG060CP0*RC KA06CP0*RC K06CP0*RC KC06CP0*RC K06CP0*RC KF06CP0*RC KG06CP0*RC KA070CP0*RC K070CP0*RC KC070CP0*RC K070CP0*RC KF070CP0*RC KG070CP0*RC KA07CP0*RC K07CP0*RC KC07CP0*RC K07CP0*RC KF07CP0*RC KG07CP0*RC KA080CP0*RC K080CP0*RC KC080CP0*RC K080CP0*RC KF080CP0*RC KG080CP0*RC KA090CP0*RC K090CP0*RC KC090CP0*RC K090CP0*RC KF090CP0*RC KG090CP0*RC KA100CP0*RC K100CP0*RC KC100CP0*RC K100CP0*RC KF100CP0*RC KG100CP0*RC idth,100 7,00 10,00 2,60,0 7,620 11,90 2,00 2,760,10,790 8,180 12,00 2,200 2,,0,10 8,70 1,10 2,0,170,790,70 9,10 10,60,70,00,810 9,880 2,810,780,0 6,00 11,000 16,20,110,190, 7,180 12,10 18,060 18,20 1,60 6,260 8,0 11,0 1, 19,790,900,110 9,120 12,280 1,720 21,10 6,0,60 9,790 1,210 1,790 22,820 8,920 8,10 10,0 16,860 2,0 1,10 7,0 11,120 1, 17,90 2,80,90 6, ,810 20,060 28,910 8,90 7,00 1,80 18,60 22,200 1,90,960 80,0 6,80 10,70 16,10 2,870,790,0 6, 11,10 18,10,100,080,790 7, ,910,20,80,120 8,020 12,670 20,20,0,670,0 8,0 1,0 21,0,770,960,790 9,00 1,200 22,890,210,0 6,70 10,060 1,70 2,0, 6,10 7,10 11,080 17,260,620 28,820 6,10 7,000 12,770 16,860 19,790 1,090 9,0 80,690 1,790 18,10 21,10,60 2,90 8,120 19,80 22,770,670 6,60 91,280 1,70 20,770 2,20 7,90 9,780 9,610 16,770 22,060 2,760 0,210, ,820 18,70 2,60 28,780,70 70, ,10 20,70,0 1,760 9,290 76, ,0 1,170 22,70 2,20,80,20 7,00 1,0 2,20 2,0,70,0 7,680 1,900 2,700 2,20,600,0 7,910 1,280 2,70 2,80,710,60 8,120 1,610 2, 2,60,720,770 8,290 26,960 2,70,860,020 8,620 1,0 28,200,00,170 8,900 16,060 29,110 2,0 8,80 101,200 10,760 1,00 19,220,60 60, ,180 10,900 1,0 19,70,160 61,80 109,870 11,210 16,010 20,20,190,20 11,0 11,80 16,00 20,60 6,120 6, 11,610 11,70 16,0 21,220 6,880 66, ,920 12,10 17,170 22,0 8,0 69,170 12,0 12,720 18,020 2,000,90 71,0 129,90 12, 21,0,90,790,670 9,090 1,00 2,0,180,60 6,80 10,00 17,20 28,60,810 6,00 7,0 12,00 19,60 2,80,90 7,00 8,90 1, 22,170 6,160 6,220 8,20 9,700 1,70 2,80 1,200 7,800 10,20 12,120 19,120 0,690 0,0 9,60 12,0 1,810 2,0 7,110 60, ,70 2, ,00 1,700 2, ,190 1, ,60, , ,70 2,810, 880 1,170 1,70 2,160,70,710 1,080 1,0 1,670 2,0,190 6,860,0,170,10 2,960 2,960 2,90 2,910 2,760 2,670 2,760 2,70 2,710 2,670 2,80 2,80 2,60 2,0 2,20 2,0 2,20 2,10 2,0 2,0 2,290 2,160 2,10 2,10 2,110 2,00 2,000 1,90 1,90 1,90 1,860 1,820 2,0,0 7, ,170 1,90 2,80, 8,0 80 1,200 1,0 2,,790 8, ,20 1,70 2,70,920 8, ,280 2,800,00 8, ,280 1,,10 9, ,0 1,70 2,,60 9,720 1,00 1,781,0 10,00 11,170 20,190,920,690,200 6,0 11,80 20,70 7,20,780,0 6,810 11,790 21,10 7,900,870,20 6,980 12,10 21,890,00,960,690 7,120 12,60 22,20,860,00,690 7,0 12, ,70,180,920 7,700 1,210 2,80,20,00 6,20 7,920 1, 2,690, 8,720 16,60 29,80,020,0,0 9,70 18,260,00,10,70 6,110 10,760 20,160 7,00,,260 6,710 11,870 22,10 1,210,800 7,00 12, 2,100,190,0 6,190 7, 1,090 26,070 8,20,00 7,190 9,10 16,0 0,20 6,0,860 8,0 10,70 18,680,0 6,00 1,860, ,060, ,220 2,280, ,0, ,70 2,720, ,90 2,90, ,060 1,80,0 6, ,210 2,110,900 7,20 in. mm in. mm in. mm in. mm in. mm in. mm in. lbs. kg lbf N lbf N lbf N lbf N lbf - in Nm lbf - in Nm

8 1 K-SERIES 1 KAA Series: Cross Section Size: " KA " K /16" KC " K " KF /" KG 1" RAIAL CONTACT, C-TYPE THIN SECTION ALL EARINGS L o L i to clear f max ( places) Steel Large iameter Light eight Small Cross Section Snap-Over Separator *NUMER* eight LOA RATINGS iameter Outside iameter NOMINAL IMENSIONS Land iameter Li -Inner Ring Lo -Outer Ring ore KA110CP0*RC K110CP0*RC KC110CP0*RC K110CP0*RC KF110CP0*RC KG110CP0*RC KA120CP0*RC K120CP0*RC KC120CP0*RC K120CP0*RC KF120CP0*RC KG120CP0*RC K10CP0*RC KC10CP0*RC K10CP0*RC KF10CP0*RC KG10CP0*RC K160CP0*RC KC160CP0*RC K160CP0*RC KF160CP0*RC KG160CP0*RC K180CP0*RC KC180CP0*RC K180CP0*RC KF180CP0*RC KG180CP0*RC K200CP0*RC KC200CP0*RC K200CP0*RC KF200CP0*RC KG200CP0*RC KC20CP0*RC K20CP0*RC KF20CP0*RC KG20CP0*RC KC00CP0*RC K00CP0*RC KF00CP0*RC KG00CP0*RC KF0CP0*RC KG0CP0*RC KF00CP0*RC KG00CP0*RC idth,10,90,70 7,870 1,260 19,700,720,000,90 8,0 1,0 21,0,810 6,910 9,920 16, 2,620 6,620 7,880 11,290 18,900,910 7,0 8,80 12, 21,160 1,190 8,20 9,800 1,020 2,20,70 12,200 17,0 29,060 2,680 1,610 20,860,700 0,890 0,0 9,100, 67,10 1,170 20,20 2,0,010 8,980 87,0 16,0 22,20 26,70 8,00 6,010 9,90 2,80 0,70,10 7, ,20 29,0,00 0,220 8,070 12,10,090,20 6,0 9,120 18,70 6,700,90 62,60 10,180 1,0,0 77,80 129,0 189,80 6, 92,790 1,0 226,70 179,90 262,890 20,70 299,10,110 6,700 7,800 12,100 18,790 29,980,60 7,290 8,80 1,10 20,0 2,0 8,0 9,820 1,180 2,10 7,080 9,620 11,160 17,20 26,80 1,810 10,780 12,0 19,260 29,60 6,0 11,90 1,80 21,20 2,620,20 17,200 26,10 0,0,110 20,60 7,960 7,90,610 86,680,00 98,90 22,70 29,800,700,820 8,80 1,60 2,70 2,0 7,720 8,0 90,80 1,900 7,90,680 67,20 10,10 16,90 2,790 9,60 76,60 117,790 18,980 7,90, 8,670 11,90 207,020,110 61,610 9,80 2,90 76,0 117,80 179,10 280,70 91,60 10,00 21,0,0 27,70 8,70 281,70 8,0 2,980,10,280 9,220 16,610 0,060,0,70 9,0 17,200 0,,20,800 10,00 18,090 2,710,800 6,00 10,00 19,000,0,00 6,0 10,870 19,980,,260 6,670 11,80 20,70 6,780 7,00 12,260 21,910 0,100 8,000 1,0 2,620 2,0 2,,120 26,0 7,080 1,260 18,70 2,90 1,010 7,880 1,710 1,700 18, 2,0 2,80 76,0 17,80 20,110 2,800,620 80,70 1,00 21,0 26,910 6,710 8,20 12,0 22,60 28,20 8,0 88,880 18,620 2,00 29,670 0,620 91,00 1,610 2,70,0 97,60 178,70,90 9,780 10, , , , , ,20 11,00 1,160 17,70,80,160 71,90 1,620 17,90 20,980 2,80,860 8,100 2,180 28,20,020 69,00 111,20 1,70 6,0 6,80 88,690 12,10,90,960 71,0 110,80 176,870 8,20 6,0 87,00 1,0 21,210 87,290 1, ,0 28,10 12, ,20 29, 6,60 7,620 62,100,90 808,20 1,00 1,710 2,010,10, 8,10 2,00 2,70,710,860 9,00 2,70,190, 7,800 12,70,0,10 6,20 10,020 16,060,60,190 8,00 12,20 19,980,80 6,80 9,870 1,00 2,20 9,860 1,220 2,0 7,080 1,110 21,70,0,90 70,0 8,290 91,0 1,760 1,70 1,700 1,670 1,0 1,620 1,620 1,70 1,00 1,0 1,80 1,60 1,0 1,20 1,220 1,210 1,190 1,180 1,090 1,090 1,080 1,070 1, ,00 1,6 1,879,180,8 10,60 1,078 1, 1,97,20 6,10 10,690 1,680 2,1,60 6,620 11,280 1,812 2,21,688 7,10 11,820 1,96 2,78,9 7,7 12,67 2,0 2,626,16 7,986 1,0 2,962,689 8,9 1,91,260,1 9,828 1,9 10,60 17,19 11,02 18,07,80 6,0 8,60 1,10 2,90 6,080,800 6,80 8,780,160 7,0 7,70 9,80 1,0 29,0 0,180 8,060 10,20 16,10 2,80 8,610 11,020 17,90,620,010 9,10 11,680 18,20,20 8,020 1,180 20,860,870 6,900 1,00 22,920,720 71,010 7,160 76,90 0,0 81,0 6,700 9,0 12,020 21,210,00 72,10 7,0 10,0 1,0 2,070,80 80,80 12,90 16,680 29,100,80 98,10 1,670 19,80,,0 116,0 18,90 2 0,200 7,910 1,0 21,70,170 6,680 8,80 1,90 7,070 62,0 112,80 208,0 8,610 82,010 1,0 2,80 178,0 17, 216,20 86, ,060 1,60 2,00,10 8, ,190 1,0 2,720,90 9,100 1,60 1,880,290 6,00 11,090 2,20,920 7,190 1,170 2,,0 8,60 1,10 2,10,0 9, 17,60,190 7,060 12,70 2,60,90 9,0 16,10 29,780 20,170,890 2,0,620 in. mm in. mm in. mm in. mm in. mm in. mm in. lbs. kg lbf N lbf N lbf N lbf N lbf - in Nm lbf - in Nm

9 17 K-SERIES L L s i L o to clear f max ( places) 1 16 KAA KA " K /16" KC " K " KF /" KG 1" Series: Cross Section Size: " 2100 Steel Large iameter Light eight Small Cross Section Circular Pocket Separator ANGULAR CONTACT, A-TYPE THIN SECTION ALL EARINGS *NUMER* eight LOA RATINGS iameter Outside iameter NOMINAL IMENSIONS Land iameter Li -Inner Ring Lo -Outer Ring Ls -Counter ore ore KAA10AG0*RC KAA1AG0*RC KAA17AG0*RC KA020AR0*RC K020AR0*RC KA02AR0*RC K02AR0*RC KA00AR0*RC K00AR0*RC KA0AR0*RC K0AR0*RC KA00AR0*RC K00AR0*RC KC00AR0*RC K00AR0*RC KF00AR0*RC KG00AR0*RC KA02AR0*RC K02AR0*RC KC02AR0*RC K02AR0*RC KF02AR0*RC KG02AR0*RC KA0AR0*RC K0AR0*RC KC0AR0*RC K0AR0*RC KF0AR0*RC KG0AR0*RC KA07AR0*RC K07AR0*RC KC07AR0*RC K07AR0*RC KF07AR0*RC KG07AR0*RC KA00AR0*RC K00AR0*RC KC00AR0*RC K00AR0*RC KF00AR0*RC KG00AR0*RC KA0AR0*RC K0AR0*RC KC0AR0*RC K0AR0*RC KF0AR0*RC idth , ,0 1,10 1,0 1,10 1,790 1,90 2,00 2,0,0 6,0 9,80 1,80 2,10 2,710,70 6,600 9,90 1, 16,801,90 7,090 10,0 2,0,020,10 7,0 10,900 1,80,180,0 7,70 11,70 2,020 2,70,0,70 8,10 1,0 2,10 2,82,0,80,0,960,070 6,890,80 7,960 6,0 9,070 11,0 1,790 28,20 2,170 7,00 9,60 12,00 16,680 29,60,260 7,80 7,70 12,720 17,70 6,0 10,0 1,0 18,60 2,610 8,90 8,180 11,120 1,10 19,10,670 0,80 8, 12,190 1,00 21,080 6,960 1,80 1,80 2,280,10 2,780,860,290,70,790,180,00,890 7,60 10,260 18,0,60,0 6,200 7,820 10,80 19,00 28,70,810 6,00 8,0 11,00 20,60 0,100,060 6,910 8,720 11, 21,160 1,60,10 7,210 9,170 12,0 21,870 2,80,820 7,920 9,920 1,680 2,980,10 6,10 8,10 10,10 1,010 12,70 17,170 1,0 19,880 16,860 2,00 19,10 26,200 2,70,60 81,80 121,700 20,20,80,790 8,170 8,70 1,800 21,00 28,910 6,790 0,710 91,010 1,890 22,0 0,70 8,790,20 9,120 1,90 2,620 2,070 0,790,780 97,280 16,00 2,890,20,10 60,80 106, ,1 1,70 2,60 1,860 2,680 1,980 2,800 2,070 2, 2,180,10,080 6,020 12,620 21,290 2,20,170,180 6, 12,70 21, 2,260,20,260 7, ,690 2,10,290,0 7,280 1,80 2,70 2,60,0,0 7,00 1 2,00 2,10,0 7, 1,980,0,890 6,29 7,700 10,90 8,0 11,920 8,810 12,60 9,210 1,210 9,700 1,920 18,10 26,780 6,10 9,700 9,960 18,90 1,090 6,670 97,820 10,00 1,10 18,90 1,760 8, ,90 10,280 1,0 19,10 2,80 9,20 10,90 10,00 19,790 2,920 9, ,90 10,720 1,80 20,190 62,190 16,80 11,80 10,20 8,890 8, 7,0 7,110 6,10 6,00,0,20,710,60,70,0,210,0,80,20,210,210,160,100,60,90,900,60,760,720,60,0,0,00, , ,080 1,10 2,070,0 7, ,090 1,0 2,10,0 7, ,120 1,70 2,60,0 7, ,10 1,00 2,0,610 8, ,160 2,0, 8, ,200 1,60 2,60,820 1,70 1,690 2,1 2,670,780 2,80,090,020,10,0,0,800 6,0 9,210 19,0 2,,0,80 6,10 10,720 19,0,720,70,980 6,0 10,90 20,20,790,60,070 6,670 11,170 20,0,80,600,160 6,80 11,0 20,680 6,880,690,0 6,90 11,70 21,0 in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. lbs. kg lbf N lbf N lbf N lbf N lbf - in Nm lbf - in Nm

10 19 K-SERIES 18 KAA KA " K /16" KC " K " KF /" KG 1" Series: Cross Section Size: " 2100 Steel Large iameter Light eight Small Cross Section Circular Pocket Separator L L s i L o to clear f max ( places) 1 ANGULAR CONTACT, A-TYPE THIN SECTION ALL EARINGS *NUMER* eight LOA RATINGS iameter Outside iameter NOMINAL IMENSIONS Land iameter Li -Inner Ring Lo -Outer Ring Ls -Counter ore ore KG0AR0*RC KA060AR0*RC K060AR0*RC KC060AR0*RC K060AR0*RC KF060AR0*RC KG060AR0*RC KA06AR0*RC K06AR0*RC KC06AR0*RC K06AR0*RC KF06AR0*RC KG06AR0*RC KA070AR0*RC K070AR0*RC KC070AR0*RC K070AR0*RC KF070AR0*RC KG070AR0*RC KA07AR0*RC K07AR0*RC KC07AR0*RC K07AR0*RC KF07AR0*RC KG07AR0*RC KA080AR0*RC K080AR0*RC KC080AR0*RC K080AR0*RC KF080AR0*RC KG080AR0*RC KA090AR0*RC K090AR0*RC KC090AR0*RC K090AR0*RC KF090AR0*RC KG090AR0*RC KA100AR0*RC K100AR0*RC KC100AR0*RC K100AR0*RC KF100AR0*RC KG100AR0*RC idth 12,20 2,190 2,,70,10 9,00 1,0 2,70,060,0 9,770 1,220 2,0,0,20,920 10,0 1,160 2,720,700,0 6,20 11,000 16,110 2,890,90,90 6,710 11,70 17,060,20,00,20 7,00 1,190 18,960,90,890 6,10 8,290 1,20 20,80,800 9,70 1,00 16,680 22,820 0,210 9,00 10,0 1,20 18,060 2,600,60,20 11,00 1,0 19,220 26,0 6,70 67,0 12,100 16,60 20,600 28,110 8,90 71, 1 17,0 22,020 29,80 2,180 7,890 1,10 19,70 2,0,60 8,670 8,0 1, 2,10 6,880 6,10 92,70,70 6,20 8,0 10,820 1,820 26,100 8,00 6,80 9,20 11,720 1,960 28,220 1,00 7,0 9,960 12,70 17,100 0,0,780 7,80 10,670 1,80 18,20 1,70 6,0 8,0 11,80 1,280 19,80,860 9,20 9,60 12,700 1,90 21, 8,090,720 10,70 1,120 17,70 2,90 1,620 60,190 18,220 28,110 8,0 8,10 6, , ,70 0,80 2,10 70, 12,0 182,60 2,,00,70 76,060 1,910 19,70,870 7,60 9,20 81,10 11, ,890 7,10 0,620,20 86,210 10, ,070 1,60 6,90 70,860 96,0 169,0 2,10 6,10 62,810 78, ,90 18,10 267,70 2,960,600,690 7,880 1,0 2,700 2,80,,80 8,070 1,920 26,10 2,600,760,980 8,260 1,0,160 2,,860,090 8,20 1,90,710 2,770,90,210 8,670 16,020 28,0,080,00 9,000 16,760 29,0,000,290,70 9,0 17,0 0, ,00 11,120 16,010 20,860,00 6,0 11,20 11,80 16,20 21,80,900 66,70 117,80 11,70 16,70 22,10 6,70 68, ,810 11,80 17,170 22,60 7,900 69,0,260 12,20 17,70 2,180 8,70 71, ,60 12,720 18,10 2,020 0,00 7,0 11,00 1,0 19,080 2,780 77,090 16,200,170,10 2,960 2,960 2,90 2,910 2,760 2,670 2,760 2,70 2,710 2,670 2,80 2,80 2,60 2,0 2,20 2,0 2,20 2,10 2,0 2,0 2,290 2,160 2,10 2,10 2,110 2,00 2,000 1,90 1,90 1,90 1,860 1,820 8, ,20 1,620 2,720,010 8, ,260 1,670 2,780,10 9, ,00 1,720 2,80,290 9, ,0 2,90,80 9, ,60 1,800 2,,20 9,800 1,10 1,860,100,780 10,190 1,00 1,80 1,92,20,980 10,60 8,00,80,20 7,210 12,100 22,290,10,960,600 7,0 12,70 2 0,20,780 7, 12,680 2,0 1,680,090, ,90 2,0,0 6,00 8,010 1,00 2,0,90,00 6,0 8,0 1,790 2,710,0,80 6,80 8,60 1,10 26,600 6, in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. lbs. kg lbf N lbf N lbf N lbf N lbf - in Nm lbf - in Nm

11 21 K-SERIES 20 KAA KA " K /16" KC " K " KF /" KG 1" Series: Cross Section Size: " 2100 Steel Large iameter Light eight Small Cross Section Circular Pocket Separator L L s i L o to clear f max ( places) 1 ANGULAR CONTACT, A-TYPE THIN SECTION ALL EARINGS *NUMER* eight LOA RATINGS iameter Outside iameter NOMINAL IMENSIONS Land iameter Li -Inner Ring Lo -Outer Ring Ls -Counter ore ore KA110AR0*RC K110AR0*RC KC110AR0*RC K110AR0*RC KF110AR0*RC KG110AR0*RC KA120AR0*RC K120AR0*RC KC120AR0*RC K120AR0*RC KF120AR0*RC KG120AR0*RC K10AR0*RC KC10AR0*RC K10AR0*RC KF10AR0*RC KG10AR0*RC K160AR0*RC KC160AR0*RC K160AR0*RC KF160AR0*RC KG160AR0*RC K180AR0*RC KC180AR0*RC K180AR0*RC KF180AR0*RC KG180AR0*RC K200AR0*RC KC200AR0*RC K200AR0*RC KF200AR0*RC KG200AR0*RC KC20AR0*RC K20AR0*RC KF20AR0*RC KG20AR0*RC KC00AR0*RC K00AR0*RC KF00AR0*RC KG00AR0*RC KF0AR0*RC KG0AR0*RC KF00AR0*RC KG00AR0*RC idth,90,0 6,720 9,080 1,880 22,70,290,80 7,290 9,870 17,100 2,60 6,760 8,90 11,0 19,790 28,0 7,710 9,680 1,00 22,80 8, 10,880 1,610 2,10 6,020 9,610 12,00 16,190 28,100,810 20,10,700 9,280 17,960 8,760 8,80 68,20,220 77,720 17,0 2,800 29,890 0,0 70,60 101,200 19,080 2,980 2,0,900 76, ,600 0,070 7,770 0,90 88,00 126,60,00,060 7, ,000 1,20 8,20 8,00 6, 11,00 160,220 2,70,0 72,020 12, ,080 66,280 89,90 1,0 219,210 79, ,160 18, ,80 21,200 0,0 2,0,720 11,80 1,0 19,0 26,220,80 6, 12,0 16,860 21,00 28,00 9,80 71,10 19,00 2,00,060 7,10 82,080 22,20,90 7,620 6,890 9,020 2, 1,10 2,180 7,60 10,70,720 6,70 81,120 1,280 8,10 100,200 12,00,80 69,0 119, ,600 1, ,000 19,00 22,00 0,620 68,680 86,20 116,0 20,90 292,070,110 7,000 9,90 126, , 16,0 86,70 108,980 17,060 2,170 6,110 98, 12,0 167,0 288, 111,160 1, ,0 26,20 62,620,0 1,0 207,910 60,80 192,20 28,620,710 2,980 20,60 09,0,0 7,20 621,20 876,00 709,00 998,180,100,0,780 9,600 17,870 1,,0,980 9,90 18,0 2,70,80 6,0 10,0 19,90,10,10 6,70 11,00 20,10,80,0 7,280 11,0 21,210 7,20,900 11,920 22,680 8,80 9,010 1,0 26,100 1,20 10,160 1,260 29,0 6,020 2,80 0,80,80,0 1,790 19,0 2,710 2,700 79,90 10,80 1,20 20,060 26,600,260 81,80 1,880 21,0 28,160, 86,700 1,910 22,910 29,90 9,060 90,0 19,70 2,0 2,80 0,670 9,0 16,610 26,20,610, , ,720 0,080 60,20 116,100 18,20,190 67,880 10,910 20,710 1, ,10 18,0 26,610 1,760 1,70 1,700 1,670 1,0 1,620 1,620 1,70 1,00 1,0 1,80 1,60 1,0 1,20 1,220 1,210 1,190 1,180 1,090 1,090 1,080 1,070 1, ,072 2,07,10 6,2 10,920 1,128 1,62 2,17,0 6,87 11,20 1,767 2,7,82 7,0 1 1,907 2,,86 7, 12,60 2,08 2,707,11 8,10 12,898 2,162 2,8,6 8,62 1,612,2,908 9,8 1,2,61,7 10, 16,687 11,82 17,982 12,17 19,1,770 6,80 9,110 1,720,700 8,70,020 7,220 9,0 1,260 28,860 9,90 7,860 10,0 1,90 1,0 2,60 8,80 11,0 17,10,60,980 9,070 12,00 18,00 6,00 7,70 9,620 12,70 19,80 8,090 60,0 1,80 21,80 2,60 67,790 1,80 2,010 6,80 7,20 0,0 79,,00 8,200 in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. lbs. kg lbf N lbf N lbf N lbf N lbf - in Nm lbf - in Nm

12 2 K-SERIES Steel Large iameter Light eight Small Cross Section Snap-Over Separator KAA KA " K /16" KC " K " KF /" KG 1" Series: Cross Section Size: " -POINT CONTACT, X-TYPE THIN SECTION ALL EARINGS L L o i 1 to clear f max ( places) *NUMER* eight LOA RATINGS iameter Outside iameter NOMINAL IMENSIONS Land iameter Li -Inner Ring Lo -Outer Ring ore KAA10XL0*RC KAA1XL0*RC KAA17XL0*RC KA020XP0*RC K020XP0*RC KA02XP0*RC K02XP0*RC KA00XP0*RC K00XP0*RC KA0XP0*RC K0XP0*RC KA00XP0*RC K00XP0*RC KC00XP0*RC K00XP0*RC KF00XP0*RC KG00XP0*RC KA02XP0*RC K02XP0*RC KC02XP0*RC K02XP0*RC KF02XP0*RC KG02XP0*RC KA0XP0*RC K0XP0*RC KC0XP0*RC K0XP0*RC KF0XP0*RC KG0XP0*RC KA07XP0*RC K07XP0*RC KC07XP0*RC K07XP0*RC KF07XP0*RC KG07XP0*RC KA00XP0*RC K00XP0*RC KC00XP0*RC K00XP0*RC KF00XP0*RC KG00XP0*RC KA0XP0*RC K0XP0*RC KC0XP0*RC K0XP0*RC KF0XP0*RC idth ,10 1,0 1,10 1,290 2,100,60 8,210 1,70 1,80,190,60 8,210 1,0 1,90 2,0,20,90 8,760 1,20 2,00 2,60,0 6,210 9,00 1,90 2,10 2,90,760 6,90 9,80 2,60 2,80,100 7,00 1,290 2,02,020,10,690,070,00,960,070 6,80,70 9,0 1,700 2,80 6,20 6,090 8,10 9,880 1,190 6,20 6,10 8,670 10,10 1,210 26,80 8, 6,760 9,00 10,90 1,700,620 1,70 7,070 9,60 11,20 16,70 28,870 10,00 12,90 18,20 1, ,000 1, 1,710 2,0 2,80 2,70,0 2,80,860,220,70,260 7,700 1,00 20,20,10,70,60 7,980 1,110 20,20,600,880,860 8,0 1,810 21,890,790,080 6,160 8,80 1,20 2,260,980,80 6,60 9,10 16,220 2,620,60,890 7,060 10,260 17,0,20,0 6,0 7,610 10,10 9,00 12,0 10, 12,680 17,170 1,20 19,0 2,00,20 9,610 91,280 1,170 20,0 2,70,00 62,760 91,280 16,010 21,710 26,070 8,00 6,880 97,70 16,860 22,600,00,20 69,00 10,70 17,700 2,90 28,70 1,860 72,10 109,20 19,0 26,200 1,00,60 78, ,000 1,20 1,70 1,20 1,880 1,10 1, 1,80 2,100 1,0 2,210 2,810,890 8,80 1,10 1,90 2,20 2,870,920 8, 1,10 1,610 2,00 2,920,080 9,180 1,820 1, 2,10 2,,10 9,80 16,70 1,680 2,80,00,0 9,20 17,110 1,720 2,60,120,0 9,820,020,0,8,70 7,70,870 8,60 6,0 8,80 6,80 9,0 6,890 9,80 1 2,280 67,0 7,070 9,920 12,770 21,890, 67,0 7,160 10,20 12, 22,600 0,80 70,70 7,0 10,280 1,210 22,820 1,720 7,260 7,70 10,90 1,20 2,0 2,0 76,110 7, 10,90 1,880 2,20, ,080 1,10 2,10 2,90 2,70,770,600 6,90 12,70 20,20,170,10 7,80 1,110 21,0,20,690,710 8,0 1,0 2,080,790,10 6,20 9,280 17,070 26,70,180,720 6,90 10,0 18, 29,0,020 6,80 8,00 12,10 22, ,0 2, ,90 2, ,760 2, ,00 1,90, ,170 2,110, ,0 2,90 10,110 7,110 6,190,0,190,60,0,690,620,10 2,820 2,780 2,70 2,670 2,0 2,00 2,670 2,0 2,90 2,0 2,00 2,290 2,0 2,90 2,60 2,00 2,290 2,180 2,00 2,70 2,0 2,290 2,180 2,290 2,260 2,20 2,180 2,000 2,060 2,00 2,000 1, , ,091 1,17 2,11,66 7, ,120 1,6 2,,79 7, ,16 1,0 2,,92 8,20 8 1,19 1,6 2,96,08 8, ,26 2,92,172 8, ,0 1,687 2,72,1 1,200 1,80 1,82 2,290,70 2,90,770,10,120,0,60,80 6,00 10,280 20,70,90,980 6,0 10,80 21,0,220,600,180 6,720 10, ,00,710,10 6, ,0 7,70,820,00 7,120 11,0 2,010 8,980,00,800 7,00 12, , ,20 1,110 1,20 2,60,00 8,0 1,10 1,0 2,00 2,,670 8,99 1,910 1,0 2,80,080 9,69 17,00 1, 2,0,00,80 10,16 18,90 1,760 2,20,0,800 11,17 20,0 1,,717 6,0 12, , ,020 1, , ,180 2, ,260 2, ,0 in. mm in. mm in. mm in. mm in. mm in. mm in. lbs. kg lbf N lbf N lbf N lbf N lbf - in Nm lbf - in Nm

13 2 K-SERIES Steel Large iameter Light eight Small Cross Section Snap-Over Separator KAA KA " K /16" KC " K " KF /" KG 1" Series: Cross Section Size: " -POINT CONTACT, X-TYPE THIN SECTION ALL EARINGS L L o i 1 to clear f max ( places) *NUMER* eight LOA RATINGS iameter Outside iameter NOMINAL IMENSIONS Land iameter Li -Inner Ring Lo -Outer Ring ore KG0XP0*RC KA060XP0*RC K060XP0*RC KC060XP0*RC K060XP0*RC KF060XP0*RC KG060XP0*RC KA06XP0*RC K06XP0*RC KC06XP0*RC K06XP0*RC KF06XP0*RC KG06XP0*RC KA070XP0*RC K070XP0*RC KC070XP0*RC K070XP0*RC KF070XP0*RC KG070XP0*RC KA07XP0*RC K07XP0*RC KC07XP0*RC K07XP0*RC KF07XP0*RC KG07XP0*RC KA080XP0*RC K080XP0*RC KC080XP0*RC K080XP0*RC KF080XP0*RC KG080XP0*RC KA090XP0*RC K090XP0*RC KC090XP0*RC K090XP0*RC KF090XP0*RC KG090XP0*RC KA100XP0*RC K100XP0*RC KC100XP0*RC K100XP0*RC KF100XP0*RC KG100XP0*RC idth 10,00 2,60,0 7,620 11,90 2,00 2,760,10,790 8,180 12,00 2,200 2,,0,10 8,70 1,10 2,0,170,790,70 9,10 1,680,70,00,810 9,880 2,810,780,0 6,00 11,000 16,20,110,190, 7,180 12,10 18,060 6,260 8,0 11,0 1, 19,790,900,110 9,120 12,280 1,720 21,10 6,0,60 9,790 1,210 1,790 22,820 8,920 8,10 10,0 16,860 2,0 1,10 60,80 11,120 1, 17,90 2,80,90 6, ,810 20,060 28,910 8,90 7,00 1,80 18,60 22,200 1,90,960 80,0 2,,70 6,00 7, 11,120 19,00 28,70,120 6,910 8,0 11, 20,60 0,100,00 7,20 8,870 12,80 21,870 2,80,880 7,920 9,70 1,680 2,280,200 6,260 8,0 10,070 1,0 2,690 6,90 7,020 9,0 11,0 16,20,0 1,00 10,60 12,70 17,960 0,0,10 11,610 21,080 28,70 9,60 8,70 1,800 22,770 0,70 6,790,20 91,010 1,890 2,70,010,60 7,070 97,280 16,00 26,160,20 2,120 60,80 10,0 12,10,80 7,00,790 6, ,80 16,20 1,20 2,00 0,10 72, ,70 182,60,610 6,0,70 79,890 1, ,790 17,60 2,0,220,610 10,10 18,290 1,80 2,90,00,70 10,80 18,20 1,80 2,,20,880 10,60 19,0 1,890 2,70 6,060 10,90 19,60 1, 2,790,60 6,170 11,190 20,20 2,00 2,890,690 6,10 11,0 21,020 2,180,90 6,680 12,100 21,790 77,670 7,920 11,00 1,20 2,90,10 81,60 8,180 11,20 1,680 2,0 6,170 82,80 8,20 11,80 1,210 26,160 7,0 8,980 8,10 12,10 1,80 26,960 8,620 86,60 8,760 12,10 1,80,0 9,780 89, 9, ,10 28,0,70 9,00 9,700 1,700 17,80 29,710,820 96,90,790,90 8,080 9,770 1,0 2,710 0,220 6,910 9,10 11,70 16,760 29,,10 7,980 10, ,20,890 2,0 9,120 12,80 1,910 21,890 8,10 8,10 10,0 1,020 16,870 2,710 66,80 12, 17,600 21,10 0,870,60 82,080 1,90 21,80 2,880 7,710 6,210 99,20, ,0 2,900, ,060 1,280 1,890,0, ,20 1,80 2,170,80,90 1,00 1,00 1,680 2,70,0 6,70 1,170 1,80 1,910 2,790,880 7,0 1,70 1, 2,0,90 6,060 9,0 1,800 2,0 2,920,260 7,70 11,220 1,80 1,920 1,880 1,80 1,710 1,760 1,710 1, 1, 1,60 1,0 1,0 1,00 1,0 1,20 1,00 1,0 1,10 1,0 1,0 1,0 1,10 1,70 1,0 1,00 1,290 1,280 1,260 1,20 1,200 1,170 1,160 1,160 1,10 1,120 1,090 8, ,71 2,8,6 9,0 1,001 1, 1,8 2,980,880 9,71 1,06 1,98 1,91,10 6,10 10,208 1,089 1,9 2,007,222 6,2 10,10 1,11 1,618 2,082,8 6, 10,882 1,212 1,72 2,226,61 6,97 11,26 1,289 1,81 2,6,776 7,2 12,17,90,20 6,100 7,870 12,700 2,10 2,0,0 6,80 8,20 1,260 26,160,210, 6, 8,90 1,800,10,10,80 6,90 8,90 1,0 28,10 6,10,00 7,200 9,260 1,80 29,070 8,10,0 7,700 9,900 1,80 0,900,0,70 8,190 10,20 16,800 2,,00 22,700 2,20,27,2 7,290 1,11 2,610 2,,668,77 8,00 1,99,770 2,8,109,1 8,810 17,7 0,90,16,68,90 9,700 19,68,196,99,0 6,2 10,6 21, 6,7,20 6,00 7,80 12,69 2,10,20,96 7,121 9,201 1,872 29,608 0,12 2, ,620 2, ,810, ,000 2,000, ,210, ,200 2,20, ,0 2,870, ,00 1,680,0, in. mm in. mm in. mm in. mm in. mm in. mm in. lbs. kg lbf N lbf N lbf N lbf N lbf - in Nm lbf - in Nm

14 K-SERIES Steel Large iameter Light eight Small Cross Section Snap-Over Separator KAA KA " K /16" KC " K " KF /" KG 1" Series: Cross Section Size: " -POINT CONTACT, X-TYPE THIN SECTION ALL EARINGS L L o i 1 to clear f max ( places) *NUMER* eight LOA RATINGS iameter Outside iameter NOMINAL IMENSIONS Land iameter Li -Inner Ring Lo -Outer Ring ore KA110XP0*RC K110XP0*RC KC110XP0*RC K110XP0*RC KF110XP0*RC KG110XP0*RC KA120XP0*RC K120XP0*RC KC120XP0*RC K120XP0*RC KF120XP0*RC KG120XP0*RC K10XP0*RC KC10XP0*RC K10XP0*RC KF10XP0*RC KG10XP0*RC K160XP0*RC KC160XP0*RC K160XP0*RC KF160XP0*RC KG160XP0*RC K180XP0*RC KC180XP0*RC K180XP0*RC KF180XP0*RC KG180XP0*RC K200XP0*RC KC200XP0*RC K200XP0*RC KF200XP0*RC KG200XP0*RC KC20XP0*RC K20XP0*RC KF20XP0*RC KG20XP0*RC KC00XP0*RC K00XP0*RC KF00XP0*RC KG00XP0*RC KF0XP0*RC KG0XP0*RC KF00XP0*RC KG00XP0*RC idth,10,90,70 7,870 1,260 19,700,720,000,90 8,0 1,0 21,0,810 6,910 9,920 16, 2,620 6,620 7,880 11,290 18,900,910 7,0 8,80 12, 21,160 1,190 8,20 9,800 1,020 2,20,70 12,200 17,0 29,060 2,680 1,610 20,860,700 0,890 0,0 9,100, 67,10 1,170 20,20 2,0,010 8,980 87,0 16,0 22,20 26,70 8,00 6,010 9,90 2,80 0,70,10 7, ,20 29,0,00 0,220 8,070 12,10,090,20 6,0 9,120 18,70 6,700,90 62,60 10,180 1,0,0 77,80 129,0 189,80 6, 92,790 1,0 226,70 179,90 262,890 20,70 299,10 8,0 11,80 1,680 19,670,10 9,20 9,00 1 1,880 21,80,,0 1,0 17,280 2,800 1,620 61,60 16,60 19,690 28,220 7,260 69,770 18,90 2 1,60 2,900 77,980 20,620 2,00,060 8,0 86,180 0,0,610 72, 106,700 6,20 2,160 86,760 1, ,900 17,700 11, ,00 7,,070 60,80 87,00 17,60 219,070 1,70,600 66,190 9, ,000 27,10 6,0 76, ,20 18,10,80 7, 87,90 12,0 210,220 10,0 82,690 98,260 10,70 2,10 6,870 91, ,980 1,90 260,0 8,0 1,720 19, 2,160 7,0 162,0 22,020 8,90 6,810 8,80 67,000 1,0 78,60 2,20,280,180 6,80 12,90 22,0 2,0,70,20 7,080 1,190 2,180,80,890 7,670 1,0 2,00,190,0 8,60 1,820 2,0,20,760 9,00 17,060,10,80 6,170 9,670 18,20 29,00 7,10 11,180 21,070,780 8,00 12,600 2,720 7,980 26,220 1, 28,620,770 10,20 1,90 18,90 0,80,60 100,220 10,900 1,0 19, 1,90 8,670 10,110 17,080 2,120 6,0 108,090 18,60 2,710 7,190 70,70 11,70 20,110 2,620 0,170 7, ,90 21,70,0,010 81,180 10,0 1,760 9,70 9,720 10,260,810 6,00 10,0 168,90 116,0 186,690 1,10 20,600 19,210 2, 1,110,20 77, ,200 22,770 0,770 6,80,0 91,70 18,700 1,80 9,690 71, ,800 18,700,020 6,80 9,110 18,00 27,200 68,090 81, , ,00 296,00 8,780 99,80 1,700 2,000 62,000 1, ,00 7,200, ,100, , ,200 1,06 97,100 1,80,000 2,170 2,90,0,110 8,800 1,0 2,70,160 6,00 10,60 1,670,700,610 8,120 1,870 20,870 6,100 7,290 10,20 17,890 26,800 7,690 9,170 1,220 22,20,80 9,70 11,280 16,20,60 0,900 17,90 2,10 2,280 62,700 2,070,90 60,290 89,120 81,80 120,220 10,880 1,920 1,070 1,060 1,00 1,00 1,020 1, ,62 1,9 2,96,981 7,721 12,7 1, 2,0 2,622,178 8,08 1,1 2,2 2,862, 8,77 1,0 2,10,086,899 9,21 1,2 2,76,29,226 10,028 16,86 2,71,92, 10,602 17,29,91 6,2 11,909 19,60,8 6,86 1,06 21,200 22,8 1,0 2,2 6,060 8, 1 17,710,0 6,670 6,70 9,100 11, 18,80,960 9,20 9,90 12,70 20,20,00 6,070 10,720 1,70 21,790 1,910 68,610 11,60 1, 2,20,610 72,890 12,10 1,0 2,620 7,160 76,920 17,0,70 2, 86,120 19,00 0,00 8,120 9,00 62, ,620 66, ,20,70 8,2 10,6 17,17,02 7,7 6,87 9,6 12,17 19,90 8,666 6,9 11,99 1, 2,7 8,6 81,06 1,70 18,9 0,2 9,200 98,7 17,69 22,712 6,268 70,7 116,79 20,81 26,69 2,61 82,28 16,28 7,8 9,69 11,07 188,88 9,6 78,7 10,708 26,1 189,106 08, 229,82 7, ,200 1,90,80 6, ,070 1,80 2,210,70 7,0 1,60 1,70 2,800,90 9,160 1,670 2,10,0 6,690 11,110 2,000 2,70,100 7, 1 2,0,020,810 9,20 1,0,20 6,70 1,000 21,0,90 8,860 17,00,860 21,70,860 2, 2,290 in. mm in. mm in. mm in. mm in. mm in. mm in. lbs. kg lbf N lbf N lbf N lbf N lbf - in Nm lbf - in Nm

15 29 28 J-SERIES SEALE (MOLE) RAIAL CONTACT, C-TYPE THIN SECTION ALL EARINGS JA020CP0*RC J020CP0*RC JA02CP0*RC J02CP0*RC JA00CP0*RC J00CP0*RC JA0CP0*RC J0CP0*RC JA00CP0*RC J00CP0*RC JC00CP0*RC J00CP0*RC JF00CP0*RC JG00CP0*RC JA02CP0*RC J02CP0*RC JC02CP0*RC J02CP0*RC JF02CP0*RC JG02CP0*RC JA0CP0*RC J0CP0*RC JC0CP0*RC J0CP0*RC JF0CP0*RC JG0CP0*RC JA07CP0*RC J07CP0*RC JC07CP0*RC J07CP0*RC JF07CP0*RC JG07CP0*RC JA00CP0*RC J00CP0*RC JC00CP0*RC J00CP0*RC JF00CP0*RC JG00CP0*RC JA0CP0*RC J0CP0*RC JC0CP0*RC J0CP0*RC JF0CP0*RC JG0CP0*RC ,890 8, 7,0 7,110 6,10 6,00,0,20,710,60,70,0,210,0,80,20,210,210,160,100,60,90,900,60,760,720,60,0,0,00, ,10 1,0 1,10 1,290 2,100,60 8,210 1,70 1,80,190,60 8,210 1,0 1,90 2,0,20,90 8,760 1,20 2,00 2,60,0 6,210 9,00 1,90 2,10 2,90,760 6,90 9,80 2,60 2,80,100 7,00 10,00,02,10,692,070,0,960,071 6,80,78 9,0 1,700 2,80 6,20 6,09 8,10 9,880 1,190 6,20 6,0 8,670 10,10 1,210 26,80 8, 6,760 9,00 10,90 1,700,620 1,70 7,07 9,60 11,20 16,70 28,870 7,78 10,00 12,90 18,20 1,60 6, ,020 1,290 2,20, ,00 1,20 2,0, ,060 1,0 2,0, ,070 1,70 2,60,10 7, ,0 2,0,80 7, ,10 1,0 2,0,0 7,80 1,78 2,90 1,966 2,710 2,166 2,890 2,8 2,0,0,70 10,010 17,0 2,629,20,80,870 10,100 18,100 2,71,0,720 6,010 10,0 18,70,80,760 6,090 10,00 19,170 2,0 2,882,890 6,180 10,810 19,80,670,07,00 6,10 11,170 20,190,920 1,080 1,60 1,10 1,0 2,00 2,0 1,980 2,0,110,90 7,980 12,960 2,70,0,110 8,00 12,960 2,200 2,920,0,60 8,820 1,820 2,10,00,610,620 9,220 1,680 2,20,210,780, 9,600 1,0 2,,00,110 6,80 10,70 16,10,800 6,90,80 6, ,10 8,810 11,700 1,80 22,020,00 7, 9,00 12,190 1,0 22,70 7,70 7, 9,790 12, 1,00 2,290,20 61,70 10, ,060 2,000 1,010 6,00 10,760 1,280 16,810 26,60 2,700 69,170 11,790 1,70 18,280 28,820 6,10 7,000 1,60 2,20 2,0 1,880 2,680 1, 2,810 2,080 2,90,70 6,20 11,20 19,0 2,110,000,80 6,80 11,810 19,0 2,170,910 6,820 12,200 20,290,110, 6,80 12,90 21,10 2,20,190,00 7,00 12,710 21,90 2,20,280,170 7,0 1,170 22,70 7,00 10,20 7,870 11,170 8,60 11,920 8,80 1 9,20 1,120 16,60 29,000 0,800 86,70 9,0 1,0 17,00 29,0 2,0 86,70 9, 1,700 17,0 0,0,0 90,20 9,880 1,80 17, 0,0,60 9, 9,960 1,190 17, 1,20 6,0 97,60 10,20 1,90 18,0 2,0 8,80 101, ,60 1,20 1,680 2,0 2,720,0 7,80 12,960 1,880,00,860 8,00 1,600 2,810,60,60 9,0 1,200 2,10,700,910 10,10 16,890 2,0,10,060 6,70 11,00 18,,00,070,80 12, 21, , ,00 1, ,10 1, ,20 2, ,70 2, ,070 1,10 1,220 1,90 2,10 2,0,280,870 10,80 19,0 2,70,0 6,20 11,810 20,10 2,060 2,960 6,820 12,810 22,20,10,070 7,180 1,70 2,00 2,0,0,0 7,70 1,620 26,0 2,,900 8,720 16,60 29, ,20 2, ,0 2, ,0 2, ,0 2, , 2, ,860,0 *NUMER* eight LOA RATINGS Outside iameter NOMINAL IMENSIONS iameter M i M o ore idth in. mm in. mm in. mm in. mm in. mm in. mm in. lbs. kg lbf N lbf N lbf N lbf N lbf - in Nm lbf - in Nm lbs. kg lbf N lbf N lbf N lbf N lbf - in Nm lbf - in Nm

16 1 0 J-SERIES SEALE (MOLE) RAIAL CONTACT, C-TYPE THIN SECTION ALL EARINGS JA060CP0*RC J060CP0*RC JC060CP0*RC J060CP0*RC JF060CP0*RC JG060CP0*RC JA06CP0*RC J06CP0*RC JC06CP0*RC J06CP0*RC JF06CP0*RC JG06CP0*RC JA070CP0*RC J070CP0*RC JC070CP0*RC J070CP0*RC JF070CP0*RC JG070CP0*RC JA07CP0*RC J07CP0*RC JC07CP0*RC J07CP0*RC JF07CP0*RC JG07CP0*RC JA080CP0*RC J080CP0*RC JC080CP0*RC J080CP0*RC JF080CP0*RC JG080CP0*RC JA090CP0*RC J090CP0*RC JC090CP0*RC J090CP0*RC JF090CP0*RC JG090CP0*RC JA100CP0*RC J100CP0*RC JC100CP0*RC J100CP0*RC JF100CP0*RC JG100CP0*RC JA110CP0*RC J110CP0*RC ,170,10 2,960 2,960 2,90 2,910 2,760 2,670 2,760 2,70 2,710 2,670 2,80 2,80 2,60 2,0 2,20 2,0 2,20 2,10 2,0 2,0 2,290 2,160 2,10 2,10 2,110 2,00 2,000 1,90 1,90 1,90 1,860 1, ,60,0 7,620 11,90 2,00 2,760,10,790 8,180 12,00 2,200 2,,0,10 8,70 1,10 2,0,170,790,70 9,10 10,60,70,00,810 9,880 2,810,780,0 6,00 11,000 16,20,110,190, 7,180 12,10 18,060,10,90 8,0 11,0 1, 19,790,900,110 9,120 12,280 1,720 21,10 6,0,60 9,790 1,210 1,790 22,820 8,920 8,10 10,0 16,860 2,0 1,10 7,0 11,120 1, 17,90 2,80,90 6, ,810 20,060 28,910 8,90 7,00 1,80 18,60 22,200 1,90,960 80,0 1,170 20, ,170 1,90 2,80, 8,0 80 1,200 1,0 2,,790 8, ,20 1,70 2,70,920 8, ,280 2,800,00 8, ,280 1,,10 9, ,0 1,70 2,,60 9,720 1,00 1,781,0 10,00 1,00 1,6,690,200 6,0 11,80 20,70 7,20,780,0 6,810 11,790 21,10 7,900,870,20 6,980 12,10 21,890,00,960,690 7,120 12,60 22,20,860,00,690 7,0 12, ,70,180,920 7,700 1,210 2,80,20,00 6,20 7,920 1, 2,690,,80 6,0 2,870,790,0 6, 11,10 18,10,100,080,790 7, ,910,20,80,120 8,020 12,670 20,20,0,670,0 8,0 1,0 21,0,770,960,790 9,00 1,200 22,890,210,0 6,70 10,060 1,70 2,0, 6,10 7,10 11,080 17,260,620,110 6,700 12,770 16,860 19,790 1,090 9,0 80,690 1,790 18,10 21,10,60 2,90 8,120 19,80 22,770,670 6,60 91,280 1,70 20,770 2,20 7,90 9,780 9,610 16,770 22,060 2,760 0,210, ,820 18,70 2,60 28,780,70 70, ,10 20,70,0 1,760 9,290 76, ,70 29,800 2,20,80,20 7,00 1,0 2,20 2,0,70,0 7,680 1,900 2,700 2,20,600,0 7,910 1,280 2,70 2,80,710,60 8,120 1,610 2, 2,60,720,770 8,290 26,960 2,70,860,020 8,620 1,0 28,200,00,170 8,900 16,060 29,110 2,980,10 10,760 1,00 19,220,60 60, ,180 10,900 1,0 19,70,160 61,80 109,870 11,210 16,010 20,20,190,20 11,0 11,80 16,00 20,60 6,120 6, 11,610 11,70 16,0 21,220 6,880 66, ,920 12,10 17,170 22,0 8,0 69,170 12,0 12,720 18,020 2,000,90 71,0 129,90 1,260 18,70,90,790,670 9,090 1,00 2,0,180,60 6,80 10,00 17,20 28,60,810 6,00 7,0 12,00 19,60 2,80,90 7,00 8,90 1, 22,170 6,160 6,220 8,20 9,700 1,70 2,80 1,200 7,800 10,20 12,120 19,120 0,690 0,0 9,60 12,0 1,810 2,0 7,110 60,760 11,00 1, ,00 1,700 2, ,190 1, ,60, , ,70 2,810, 880 1,170 1,70 2,160,70,710 1,080 1,0 1,670 2,0,190 6,860 1,00 1,710,020,0,0 9,70 18,260,00,10,70 6,110 10,760 20,160 7,00,,260 6,710 11,870 22,10 1,210,800 7,00 12, 2,100,190,0 6,190 7, 1,090 26,070 8,20,00 7,190 9,10 16,0 0,20 6,0,860 8,0 10,70 18,680,0 6,00 6,700 9, ,060, ,220 2,280, ,0, ,70 2,720, ,90 2,90, ,060 1,80,0 6, ,210 2,110,900 7, ,060 *NUMER* eight LOA RATINGS Outside iameter NOMINAL IMENSIONS iameter M i M o ore idth in. mm in. mm in. mm in. mm in. mm in. mm in. lbs. kg lbf N lbf N lbf N lbf N lbf - in Nm lbf - in Nm lbs. kg lbf N lbf N lbf N lbf N lbf - in Nm lbf - in Nm

17 SEALE (MOLE) RAIAL CONTACT, C-TYPE THIN SECTION ALL EARINGS *NUMER* JC110CP0*RC J110CP0*RC JF110CP0*RC JG110CP0*RC JA120CP0*RC J120CP0*RC JC120CP0*RC J120CP0*RC JF120CP0*RC JG120CP0*RC ore Outside iameter NOMINAL IMENSIONS M i idth M o iameter in. mm in. mm in. mm in. mm in. mm in. mm in LOA RATINGS eight lbs. kg lbf N lbf N lbf N lbf N lbf - in Nm lbf - in Nm ,70 7,870 1,260 19,700,720,000,90 8,0 1,0 21,0 2,0,010 8,980 87,0 16,0 22,20 26,70 8,00 6,010 9,90 1,879,180,8 10,60 1,078 1, 1,97,20 6,10 10,690 8,60 1,10 2,90 6,080,800 6,80 8,780,160 7,0 7,800 12,100 18,790 29,980,60 7,290 8,80 1,10 20,0 2,0,700,820 8,80 1,60 2,70 2,0 7,720 8,0 90,80 1,900,280 9,220 16,610 0,060,0,70 9,0 17,200 0, 2,90 1,010 7,880 1,710 1,700 18, 2,0 2,80 76,0 17,80 17,70,80,160 71,90 1,620 17,90 20,980 2,80,860 8,100 2,010,10, 8,10 2,00 2,70,710,860 9,00 12,020 21,210,00 72,10 7,0 10,0 1,0 2,070,80 80,80 1,60 2,00,10 8, ,190 1,0 2,720,90 9,100 1,760 1,70 1,700 1,670 1,0 1,620 1,620 1,70 J-SERIES Contact your RC Sales Engineer for sizes above ore. 2

18 SEALE (MOLE) -POINT CONTACT, X-TYPE THIN SECTION ALL EARINGS J-SERIES JA020XP0*RC J020XP0*RC JA02XP0*RC J02XP0*RC JA00XP0*RC J00XP0*RC JA0XP0*RC J0XP0*RC JA00XP0*RC J00XP0*RC JC00XP0*RC J00XP0*RC JF00XP0*RC JG00XP0*RC JA02XP0*RC J02XP0*RC JC02XP0*RC J02XP0*RC JF02XP0*RC JG02XP0*RC JA0XP0*RC J0XP0*RC JC0XP0*RC J0XP0*RC JF0XP0*RC JG0XP0*RC JA07XP0*RC J07XP0*RC JC07XP0*RC J07XP0*RC JF07XP0*RC JG07XP0*RC JA00XP0*RC J00XP0*RC JC00XP0*RC J00XP0*RC JF00XP0*RC JG00XP0*RC JA0XP0*RC J0XP0*RC JC0XP0*RC J0XP0*RC JF0XP0*RC JG0XP0*RC ,10 1,0 1,10 1,290 2,100,60 8,210 1,70 1,80,190,60 8,210 1,0 1,90 2,0,20,90 8,760 1,20 2,00 2,60,0 6,210 9,00 1,90 2,10 2,90,760 6,90 9,80 2,60 2,80,100 7,00 10,00,020,10,690,070,00,960,070 6,80,70 9,0 1,700 2,80 6,20 6,090 8,10 9,880 1,190 6,20 6,10 8,670 10,10 1,210 26,80 8, 6,760 9,00 10,90 1,700,620 1,70 7,070 9,60 11,20 16,70 28,870 10,00 12,90 18,20 1,60 6,260 1,710 2,0 2,80 2,70,0 2,80,860,220,70,260 7,700 1,00 20,20,10,70,60 7,980 1,110 20,20,600,880,860 8,0 1,810 21,890,790,080 6,160 8,80 1,20 2,260,980,80 6,60 9,10 16,220 2,620,60,890 7,060 10,260 17,0 2, 7,606 10,10 9,00 12,0 10, 12,680 17,170 1,2 19,0 2,00,20 9,610 91,280 1,170 20,0 2,70,00 62,760 91,280 16,010 21,710 26,070 8,00 6,880 97,70 16,860 22,600,00,20 69,00 10,70 17,700 2,90 28,70 1,860 72,10 109,20 19,0 26,200 1,00,60 78,20 11,610 1,20 1,70 1,20 1,880 1,10 1, 1,80 2,100 1,0 2,210 2,810,890 8,80 1,10 1,90 2,20 2,870,920 8, 1,10 1,610 2,00 2,920,080 9,180 1,820 1, 2,10 2,,10 9,80 16,70 1,680 2,80,00,0 9,20 17,110 1,720 2,60,120,0 9,820 17,60,70 7,70,870 8,60 6,0 8,80 6,80 9,0 6,890 9,80 1 2,280 67, ,920 12,770 21,890, 67,0 7,160 10,20 12, 22,600 0,80 70,70 7,0 10,280 1,210 22,820 1,720 7,260 7,70 10,90 1,20 2,0 2,0 76,110 7, 10,90 1,880 2,20,680 77, ,080 1,10 2,10 2,90 2,70,770,600 6,90 12,70 20,20,170,10 7,80 1,110 21,0,20,690,710 8,0 1,0 2,080,790,10 6,20 9,280 17,070 26,70,180,720 6,90 10,0 18, 29,0,020 6,80 8,00 12,10 22,00, ,0 2, ,90 2, ,760 2, ,00 1,90, ,170 2,110, ,0 2,90,820,0,190,60,0,690,620,10 2,820 2,780 2,70 2,670 2,0 2,00 2,670 2,0 2,90 2,0 2,00 2,290 2,0 2,90 2,60 2,00 2,290 2,180 2,00 2,70 2,0 2,290 2, ,260 2,20 2,180 2,000 2,060 2,00 2,000 1,920 1, , ,091 1,17 2,11,66 7, ,120 1,6 2,,79 7, ,16 1,0 2,,92 8,20 8 1,19 1,6 2,96,08 8, ,26 2,92,172 8, ,0 1,687 2,72,1 8,979 2,290,70 2,90,770,10,120,0,,80 6,00 10,280 20,70,90,980 6,0 10,80 21,0,220,600,180 6,720 10, ,00,710,10 6, ,0 7,70,821,00 7,120 11,0 2,010 8,980,00,800 7,00 12,120, , ,20 1,110 1,20 2,60,00 8,0 1,10 1,0 2,00 2,,670 8,99 1,910 1,0 2,80,080 9,69 17,00 1, 2,0,00,80 10,16 18,90 1,760 2,20,0,800 11,17 20,0 1,,717 6,0 12,696 22, , ,020 1, , ,180 2, ,260 2, ,0 2,60 *NUMER* eight LOA RATINGS Outside iameter NOMINAL IMENSIONS iameter M i M o ore idth in. mm in. mm in. mm in. mm in. mm in. mm in. lbs. kg lbf N lbf N lbf N lbf N lbf - in Nm lbf - in Nm lbs. kg lbf N lbf N lbf N lbf N lbf - in Nm lbf - in Nm

19 7 6 SEALE (MOLE) -POINT CONTACT, X-TYPE THIN SECTION ALL EARINGS J-SERIES JA060XP0*RC J060XP0*RC JC060XP0*RC J060XP0*RC JF060XP0*RC JG060XP0*RC JA06XP0*RC J06XP0*RC JC06XP0*RC J06XP0*RC JF06XP0*RC JG06XP0*RC JA070XP0*RC J070XP0*RC JC070XP0*RC J070XP0*RC JF070XP0*RC JG070XP0*RC JA07XP0*RC J07XP0*RC JC07XP0*RC J07XP0*RC JF07XP0*RC JG07XP0*RC JA080XP0*RC J080XP0*RC JC080XP0*RC J080XP0*RC JF080XP0*RC JG080XP0*RC JA090XP0*RC J090XP0*RC JC090XP0*RC J090XP0*RC JF090XP0*RC JG090XP0*RC JA100XP0*RC J100XP0*RC JC100XP0*RC J100XP0*RC JF100XP0*RC JG100XP0*RC JA110XP0*RC J110XP0*RC ,60,0 7,620 11,90 2,00 2,760,10,790 8,180 12,00 2,200 2,,0,10 8,70 1,10 2,0,170,790,70 9,10 1,680,70,00,810 9,880 2,810,780,0 6,00 11,000 16,20,110,190, 7,180 12,10 18,060,10,90 8,2 11,0 1, 19,790,900, ,280 1,720 21,10 6,0,60 9,790 1,210 1,790 22,820 8,920 8,10 10,0 16,860 2,0 1,10 60,80 11,120 1, 17,90 2,80,90 6, ,810 20,060 28,910 8,90 7,00 1,80 18,60 22,200 1,90,960 80,0 1,170 20,20,70 6,00 7, 11,120 19,00 28,70,120 6,910 8,0 11, 20,60 0,100,00 7,20 8,870 12,80 21,870 2,80,880 7,920 9,70 1,680 2,280,200 6,260 8,0 10,070 1,0 2,690 6,90 7,020 9,0 11,0 16,20,0 1,00 10,60 12,70 17,960 0,0,10 8,0 11,80 21,08 28,70 9,60 8,70 1,800 22,77 0,70 6,790,20 91,010 1,890 2,70,010,60 7,070 97,280 16,00 26,160,20 2,120 60,80 10,0 12,10,80 7,00,790 6, ,80 16,20 1,20 2,00 0,10 72, ,70 182,60,610 6,0,70 79,890 1, ,790 7,,070 2,0,220,610 10,10 18,290 1,80 2,90,00,70 10,80 18,20 1,80 2,,20,880 10,60 19,0 1,890 2,70 6,060 10,90 19,60 1, 2,790,60 6,170 11,190 20,20 2,00 2,890,690 6,10 11,0 21,020 2,180,90 6,680 12,100 21,790 2,20, ,00 1,20 2,90,10 81, ,20 1,680 2,0 6,170 82,80 8,20 11,80 1,210 26,160 7,0 8,980 8,10 12,10 1,80 26,960 8,620 86,60 8,760 12,10 1,80,0 9,780 89, 9, ,10 28,0,70 9,00 9,700 1,700 17,80 29,710,820 96,90 10,20 1,90,90 8,080 9,770 1,0 2,710 0,220 6,910 9,10 11,70 16,760 29,,10 7,980 10, ,20,890 2,0 9,120 12,80 1,910 21,890 8,10 8,10 10,0 1,020 16,870 2,710 66,80 12, 17,600 21,10 0,870,60 82,080 1,90 21,80 2,880 7,710 6,210 99,20 19,210 2, ,0 2,900, ,060 1,280 1,890,0, ,20 1,80 2,170,80,90 1,00 1,00 1,680 2,70,0 6,70 1,170 1,80 1,910 2,790,880 7,0 1,70 1, 2,0,90 6,060 9,0 1,800 2,0 2,920,260 7,70 11,220 2,170 2,90 1,920 1,880 1,80 1,710 1,760 1,710 1, 1, 1,60 1,0 1,0 1,00 1,0 1,20 1,00 1,0 1,10 1,0 1,0 1,0 1,10 1,70 1,0 1,00 1,290 1,280 1,260 1,20 1,200 1,170 1,160 1,160 1,10 1,120 1,090 1,070 1, ,71 2,8,6 9,0 1,001 1, 1,8 2,980,880 9,71 1,06 1,98 1,91,10 6,10 10,208 1,089 1,9 2,007,222 6,2 10,10 1,11 1,618 2,082,8 6, 10,882 1,212 1,72 2,226,61 6,97 11,26 1,289 1,81 2,6,776 7,2 12,17 1,62 1,9,20 6,100 7,870 12,700 2,10 2,0,0 6,80 8,20 1,260 26,160,210, 6, 8,90 1,800,10,10,80 6,90 8,90 1,0 28,10 6,10,00 7,200 9,260 1,80 29,070 8,10,0 7,700 9,900 1,80 0,900,0,70 8,190 10,20 16,800 2,,00 6,060 8, 2,20,27,2 7,290 1,11 2,610 2,,668,77 8,00 1,99,770 2,8,109,1 8,810 17,7 0,90,16,68,90 9,700 19,68,196,99,0 6,2 10,6 21, 6,7,20 6,00 7,80 12,69 2,10,20,96 7,121 9,201 1,872 29,608 0,12,70 8, ,620 2, ,810, ,000 2,000, ,210, ,200 2,20, ,0 2,870, ,00 1,680,0, 90 *NUMER* eight LOA RATINGS Outside iameter NOMINAL IMENSIONS iameter M i M o ore idth in. mm in. mm in. mm in. mm in. mm in. mm in. lbs. kg lbf N lbf N lbf N lbf N lbf - in Nm lbf - in Nm lbs. kg lbf N lbf N lbf N lbf N lbf - in Nm lbf - in Nm

20 SEALE (MOLE) -POINT CONTACT, X-TYPE THIN SECTION ALL EARINGS *NUMER* JC110XP0*RC J110XP0*RC JF110XP0*RC JG110XP0*RC JA120XP0*RC J120XP0*RC JC120XP0*RC J120XP0*RC JF120XP0*RC JG120XP0*RC ore Outside iameter NOMINAL IMENSIONS M i idth M o in. mm in. mm in. mm in. mm in. mm in. mm iameter LOA RATINGS eight lbs. kg lbf N lbf N lbf N lbf N lbf - in Nm lbf - in Nm ,70 7,870 1,260 19,700,720,000,90 8,0 1,0 21,0 2,0,010 8,980 87,0 16,0 22,20 26,70 8,00 6,010 9,90 2,96,981 7,721 12,7 1, 2,0 2,622,178 8,08 1,1 1 17,710,0 6,670 6,70 9,100 11, 18,80,960 9,20 1,680 19,670,10 9,20 9,00 1 1,880 21,80,,0 60,80 87,00 17,60 219,070 1,70,600 66,190 9, ,000 27,10,180 6,80 12,90 22,0 2,0,70,20 7,080 1,190 2,180 18,90 0,80,60 100,220 10,900 1,0 19, 1,90 8,670 10,110 1,110,20 77, ,200 22,770 0,770 6,80,0 91,70 18,700,0,110 8,800 1,0 2,70,160 6,00 10,60 1,670 10,6 17,17,02 7,7 6,87 9,6 12,17 19,90 8,666 6,9 1,200 1,90,80 6, ,070 1,80 2,210,70 7,0 1,00 1,00 1,020 1, J-SERIES Contact your RC Sales Engineer for sizes above ore. 8

21 SEALE (MOLE) RAIAL CONTACT C-TYPE THIN SECTION ALL EARINGS JHA-SERIES *NUMER* JHA10CL0*RC JHA1CL0*RC JHA17CL0*RC ore Outside iameter NOMINAL IMENSIONS M i idth M o iameter in. mm in. mm in. mm in. mm in. mm in. mm in LOA RATINGS eight lbs. kg lbf N lbf N lbf N lbf N lbf - in Nm lbf - in Nm ,290 2, ,0 1,60 2, ,10 2,890, ,020 1,0,910,0, ,80 11,80 10,20 0 1

22 SEALE (MOLE) -POINT CONTACT, X-TYPE THIN SECTION ALL EARINGS JHA-SERIES *NUMER* JHA10XL0*RC JHA1XL0*RC JHA17XL0*RC ore Outside iameter NOMINAL IMENSIONS M i idth M o in. mm in. mm in. mm in. mm in. mm in. mm iameter in LOA RATINGS eight lbs. kg lbf N lbf N lbf N lbf N lbf - in Nm lbf - in Nm ,290 1,779 2, ,200 1,80 1,8 70 1,000 1,,20,0 6, ,000,020, ,110 7,110 6,190 2

23 SEALE (MOLE) RAIAL CONTACT, C-TYPE JU-SERIES THIN SECTION ALL EARINGS to clear.01 max ( places) M o M i JU-SERIES *NUMER* JU00CP0*RC JU02CP0*RC JU0CP0*RC JU07CP0*RC JU00CP0*RC JU0CP0*RC JU060CP0*RC JU06CP0*RC JU070CP0*RC JU07CP0*RC JU080CP0*RC JU090CP0*RC JU100CP0*RC JU110CP0*RC JU120CP0*RC 1 ore Outside iameter NOMINAL IMENSIONS M i idth M o iameter in. mm in. mm in. mm in. mm in. mm in LOA RATINGS eight lbs. kg lbf N lbf N lbf N lbf N lbf - in Nm lbf - in Nm ,100 2,0 2,60 2,90 2,80,1,0,790,00,0,,70,90 9,0 9,880 10,10 10,90 11,20 12,90 1, 1,70 1,790 16,860 17,90 20,060 22,200 2,0 26,70 1,290 1,20 1,0 1,70 1,0 1,0 1,90 1,0 1,70 1, 1,70 1,781 1,879 1,97,70,870 6,010 6,090 6,180 6,10 6,0 6,810 6,980 7,120 7,0 7,700 7,920 8,60 8,780,110,0,0,610,780,110,0,790,120,0,790 6,70 7,10 7,800 8,80 1,80 1,0 1,00 16,060 16,810 18,280 19,790 21,10 22,770 2,20 2,760 28,780 1,760,700 7,720,70,80,910,,00,170,20,0,0,60,770,020,170,280,70 16,60 17,00 17,0 17, 17, 18,0 19,220 19,70 20,20 20,60 21,220 22,0 2,000 2,90 2,0 2,720,00,60,700,060,80,670 6,80 7,0 8,90 9,700 12,120 1,810 17,70 20, ,70 1,670 2,010 2,70,280,0,070,0,900,0 6,110 6,710 7,00 7, 9,10 10,70 12,020 1, ,060 1,210 1,60 1,0,,60,280,120 2,980 2,720 2,0 2,0 2,170 2,00 1,910 1,700 1,10 1,00

24 SEALE (MOLE) -POINT CAONTACT, X-TYPE THIN SECTION ALL EARINGS to clear.01 max ( places) M o M i JU-SERIES *NUMER* JU00XP0*RC JU02XP0*RC JU0XP0*RC JU07XP0*RC JU00XP0*RC JU0XP0*RC JU060XP0*RC JU06XP0*RC JU070XP0*RC JU07XP0*RC JU080XP0*RC JU090XP0*RC JU100XP0*RC JU110XP0*RC JU120XP0*RC NOMINAL IMENSIONS LOA RATINGS M i M o ore Outside iameter idth iameter eight in. mm in. mm in. mm in. mm in. mm in. lbs. kg lbf N lbf N lbf N lbf N lbf - in Nm lbf - in Nm ,100 2,0 2,60 2,90 2,80,10,0,790,00,0,,70,90 9,0 9,880 10,10 10,90 11,20 12,90 1, 1,720 1,790 16,860 17,90 20,060 22,200 2,0 26,70 1,17 1,6 1,0 1,6 1,687 1,8 1,91 2,007 2,082 2,226 2,6 2,96 2,622 6,00 6,0 6,720 6,920 7,120 7,00 7,870 8,20 8,90 8,90 9,260 9,900 10, ,,260,60,860 6,160 6,60 7,060 7, 8,0 8,870 9,70 10,070 11,0 12,70 1,680 1,880 2,00 2,70 26,070,00 28,70 1,00 6,790,60 2,120,790 0,10,70 60,80 66,190 2,810 2,870 2,920 2,,00,120,220,00,20,60,690,90,180, ,770 12, 1,210 1,20 1,880 1,20 1,680 1,210 1,80 1,80 16,10 17,80 18,90 19,,600,10,710 6,20 6,90 8,00 9,770 11,70 1 1,910 16,870 21,10 2,880 1,110 6, ,280 1,80 1,680 1,910 2,0 2,920,0,160 2,60 2, 2,80,00,0,717,2,77,1,90 6,2 7,80 9,201 10,6 12, ,00 1,200 1,80 2,280 2,160 2,00 1,90 1,860 1,700 1,70 1,60 1,60 1,0 1,190 1,

25 9 8 G-SERIES SEALE (COMO) RAIAL CONTACT, C -TYPE THIN SECTION ALL EARINGS GA020CP0*RC G020CP0*RC GA02CP0*RC G02CP0*RC GA00CP0*RC G00CP0*RC GA0CP0*RC G0CP0*RC GA00CP0*RC G00CP0*RC GC00CP0*RC G00CP0*RC GF00CP0*RC GG00CP0*RC GA02CP0*RC G02CP0*RC GC02CP0*RC G02CP0*RC GF02CP0*RC GG02CP0*RC GA0CP0*RC G0CP0*RC GC0CP0*RC G0CP0*RC GF0CP0*RC GG0CP0*RC GA07CP0*RC G07CP0*RC GC07CP0*RC G07CP0*RC GF07CP0*RC GG07CP0*RC GA00CP0*RC G00CP0*RC GC00CP0*RC G00CP0*RC GF00CP0*RC GG00CP0*RC GA0CP0*RC G0CP0*RC GC0CP0*RC G0CP0*RC GF0CP0*RC GG0CP0*RC ,890 8, 7,0 7,110 6,10 6,00,0,20,710,60,70,0,210,0,80,20,210,210,160,100,60,90,900,60,760,720,60,0,0,00, ,10 1,0 1,10 1,290 2,100,60 8,210 1,70 1,80,190,60 8,210 1,0 1,90 2,0,20,90 8,760 1,20 2,00 2,60,0 6,210 9,00 1,90 2,10 2,90,760 6,90 9,80 2,60 2,80,100 7,00 10,00,02,10,692,070,0,960,071 6,80,78 9,0 1,700 2,80 6,20 6,09 8,10 9,880 1,190 6,20 6,0 8,670 10,10 1,210 26,80 8, 6,760 9,00 10,90 1,700,620 1,70 7,07 9,60 11,20 16,70 28,870 7,78 10,00 12,90 18,20 1,60 6, ,020 1,290 2,20, ,00 1,20 2,0, ,060 1,0 2,0, ,070 1,70 2,60,10 7, ,0 2,0,80 7, ,10 1,0 2,0,0 7,80 1,78 2,90 1,966 2,710 2,166 2,890 2,8 2,0,0,70 10,010 17,0 2,629,20,80,870 10,100 18,100 2,71,0,720 6,010 10,0 18,70,80,760 6,090 10,00 19,170 2,0 2,882,890 6,180 10,810 19,80,670,07,00 6,10 11,170 20,190,920 1,080 1,60 1,10 1,0 2,00 2,0 1,980 2,0,110,90 7,980 12,960 2,70,0,110 8,00 12,960 2,200 2,920,0,60 8,820 1,820 2,10,00,610,620 9,220 1,680 2,20,210,780, 9,600 1,0 2,,00,110 6,80 10,70 16,10,800 6,90,80 6, ,10 8,810 11,700 1,80 22,020,00 7, 9,00 12,190 1,0 22,70 7,70 7, 9,790 12, 1,00 2,290,20 61,70 10, ,060 2,000 1,010 6,00 10,760 1,280 16,810 26,60 2,700 69,170 11,790 1,70 18,280 28,820 6,10 7,000 1,60 2,20 2,0 1,880 2,680 1, 2,810 2,080 2,90,70 6,20 11,20 19,0 2,110,000,80 6,80 11,810 19,0 2,170,910 6,820 12,200 20,290,110, 6,80 12,90 21,10 2,20,190,00 7,00 12,710 21,90 2,20,280,170 7,0 1,170 22,70 7,00 10,20 7,870 11,170 8,60 11,920 8,80 1 9,20 1,120 16,60 29,000 0,800 86,70 9,0 1,0 17,00 29,0 2,0 86,70 9, 1,700 17,0 0,0,0 90,20 9,880 1,80 17, 0,0,60 9, 9,960 1,190 17, 1,20 6,0 97,60 10,20 1,90 18,0 2,0 8,80 101, ,60 1,20 1,680 2,0 2,720,0 7,80 12,960 1,880,00,860 8,00 1,600 2,810,60,60 9,0 1,200 2,10,700,910 10,10 16,890 2,0,10,060 6,70 11,00 18,,00,070,80 12, 21, , ,00 1, ,10 1, ,20 2, ,70 2, ,070 1,10 1,220 1,90 2,10 2,0,280,870 10,80 19,0 2,70,0 6,20 11,810 20,10 2,060 2,960 6,820 12,810 22,20,10,070 7,180 1,70 2,00 2,0,0,0 7,70 1,620 26,0 2,,900 8,720 16,60 29, ,20 2, ,0 2, ,0 2, ,0 2, , 2, ,860,0 *NUMER* eight LOA RATINGS Outside iameter NOMINAL IMENSIONS iameter M i M o ore idth in. mm in. mm in. mm in. mm in. mm in. mm in. lbs. kg lbf N lbf N lbf N lbf N lbf - in Nm lbf - in Nm lbs. kg lbf N lbf N lbf N lbf N lbf - in Nm lbf - in Nm

26 GA060CP0*RC G060CP0*RC GC060CP0*RC G060CP0*RC GF060CP0*RC GG060CP0*RC GA06CP0*RC G06CP0*RC GC06CP0*RC G06CP0*RC GF06CP0*RC GG06CP0*RC GA070CP0*RC G070CP0*RC GC070CP0*RC G070CP0*RC GF070CP0*RC GG070CP0*RC GA07CP0*RC G07CP0*RC GC07CP0*RC G07CP0*RC GF07CP0*RC GG07CP0*RC GA080CP0*RC G080CP0*RC GC080CP0*RC G080CP0*RC GF080CP0*RC GG080CP0*RC GA090CP0*RC G090CP0*RC GC090CP0*RC G090CP0*RC GF090CP0*RC GG090CP0*RC GA100CP0*RC G100CP0*RC GC100CP0*RC G100CP0*RC GF100CP0*RC GG100CP0*RC GA110CP0*RC G110CP0*RC ,170,10 2,960 2,960 2,90 2,910 2,760 2,670 2,760 2,70 2,710 2,670 2,80 2,80 2,60 2,0 2,20 2,0 2,20 2,10 2,0 2,0 2,290 2,160 2,10 2,10 2,110 2,00 2,000 1,90 1,90 1,90 1,860 1, ,60,0 7,620 11,90 2,00 2,760,10,790 8,180 12,00 2,200 2,,0,10 8,70 1,10 2,0,170,790,70 9,10 10,60,70,00,810 9,880 2,810,780,0 6,00 11,000 16,20,110,190, 7,180 12,10 18,060,10,90 8,0 11,0 1, 19,790,900,110 9,120 12,280 1,720 21,10 6,0,60 9,790 1,210 1,790 22,820 8,920 8,10 10,0 16,860 2,0 1,10 7,0 11,120 1, 17,90 2,80,90 6, ,810 20,060 28,910 8,90 7,00 1,80 18,60 22,200 1,90,960 80,0 1,170 20, ,170 1,90 2,80, 8,0 80 1,200 1,0 2,,790 8, ,20 1,70 2,70,920 8, ,280 2,800,00 8, ,280 1,,10 9, ,0 1,70 2,,60 9,720 1,00 1,781,0 10,00 1,00 1,6,690,200 6,0 11,80 20,70 7,20,780,0 6,810 11,790 21,10 7,900,870,20 6,980 12,10 21,890,00,960,690 7,120 12,60 22,20,860,00,690 7,0 12, ,70,180,920 7,700 1,210 2,80,20,00 6,20 7,920 1, 2,690,,80 6,0 2,870,790,0 6, 11,10 18,10,100,080,790 7, ,910,20,80,120 8,020 12,670 20,20,0,670,0 8,0 1,0 21,0,770,960,790 9,00 1,200 22,890,210,0 6,70 10,060 1,70 2,0, 6,10 7,10 11,080 17,260,620,110 6,700 12,770 16,860 19,790 1,090 9,0 80,690 1,790 18,10 21,10,60 2,90 8,120 19,80 22,770,670 6,60 91,280 1,70 20,770 2,20 7,90 9,780 9,610 16,770 22,060 2,760 0,210, ,820 18,70 2,60 28,780,70 70, ,10 20,70,0 1,760 9,290 76, ,70 29,800 2,20,80,20 7,00 1,0 2,20 2,0,70,0 7,680 1,900 2,700 2,20,600,0 7,910 1,280 2,70 2,80,710,60 8,120 1,610 2, 2,60,720,770 8,290 26,960 2,70,860,020 8,620 1,0 28,200,00,170 8,900 16,060 29,110 2,980,10 10,760 1,00 19,220,60 60, ,180 10,900 1,0 19,70,160 61,80 109,870 11,210 16,010 20,20,190,20 11,0 11,80 16,00 20,60 6,120 6, 11,610 11,70 16,0 21,220 6,880 66, ,920 12,10 17,170 22,0 8,0 69,170 12,0 12,720 18,020 2,000,90 71,0 129,90 1,260 18,70,90,790,670 9,090 1,00 2,0,180,60 6,80 10,00 17,20 28,60,810 6,00 7,0 12,00 19,60 2,80,90 7,00 8,90 1, 22,170 6,160 6,220 8,20 9,700 1,70 2,80 1,200 7,800 10,20 12,120 19,120 0,690 0,0 9,60 12,0 1,810 2,0 7,110 60,760 11,00 1, ,00 1,700 2, ,190 1, ,60, , ,70 2,810, 880 1,170 1,70 2,160,70,710 1,080 1,0 1,670 2,0,190 6,860 1,00 1,710,020,0,0 9,70 18,260,00,10,70 6,110 10,760 20,160 7,00,,260 6,710 11,870 22,10 1,210,800 7,00 12, 2,100,190,0 6,190 7, 1,090 26,070 8,20,00 7,190 9,10 16,0 0,20 6,0,860 8,0 10,70 18,680,0 6,00 6,700 9, ,060, ,220 2,280, ,0, ,70 2,720, ,90 2,90, ,060 1,80,0 6, ,210 2,110,900 7, ,060 *NUMER* eight LOA RATINGS Outside iameter NOMINAL IMENSIONS iameter M i M o ore idth G-SERIES SEALE (COMO) RAIAL CONTACT, C -TYPE THIN SECTION ALL EARINGS in. mm in. mm in. mm in. mm in. mm in. mm in. lbs. kg lbf N lbf N lbf N lbf N lbf - in Nm lbf - in Nm lbs. kg lbf N lbf N lbf N lbf N lbf - in Nm lbf - in Nm

27 SEALE (COMO) RAIAL CONTACT, C -TYPE THIN SECTION ALL EARINGS *NUMER* GC110CP0*RC G110CP0*RC GF110CP0*RC GG110CP0*RC GA120CP0*RC G120CP0*RC GC120CP0*RC G120CP0*RC GF120CP0*RC GG120CP0*RC ore Outside iameter NOMINAL IMENSIONS M i idth M o iameter in. mm in. mm in. mm in. mm in. mm in. mm in LOA RATINGS eight lbs. kg lbf N lbf N lbf N lbf N lbf - in Nm lbf - in Nm ,70 7,870 1,260 19,700,720,000,90 8,0 1,0 21,0 2,0,010 8,980 87,0 16,0 22,20 26,70 8,00 6,010 9,90 1,879,180,8 10,60 1,078 1, 1,97,20 6,10 10,690 8,60 1,10 2,90 6,080,800 6,80 8,780,160 7,0 7,800 12,100 18,790 29,980,60 7,290 8,80 1,10 20,0 2,0,700,820 8,80 1,60 2,70 2,0 7,720 8,0 90,80 1,900,280 2,90 9,220 1,010 16,610 7,880 0,060 1,710 1,700,0 18,,70 2,0 9,0 2,80 17,200 76,0 0, 17,80 17,70,80,160 71,90 1,620 17,90 20,980 2,80,860 8,100 2,010,10, 8,10 2,00 2,70,710,860 9,00 12,020 21,210,00 72,10 7,0 10,0 1,0 2,070,80 80,80 1,60 2,00,10 8, ,190 1,0 2,720,90 9,100 1,760 1,70 1,700 1,670 1,0 1,620 1,620 1,70 G-SERIES Contact your RC Sales Engineer for sizes above ore. 2

28 SEALE (COMO) -POINT CONTACT, X-TYPE THIN SECTION ALL EARINGS G-SERIES G A020XP0*RC G020XP0*RC GA02XP0*RC G02XP0*RC GA00XP0*RC G00XP0*RC GA0XP0*RC G0XP0*RC GA00XP0*RC G00XP0*RC GC00XP0*RC G00XP0*RC GF00XP0*RC GG00XP0*RC GA02XP0*RC G02XP0*RC GC02XP0*RC G02XP0*RC GF02XP0*RC GG02XP0*RC GA0XP0*RC G0XP0*RC GC0XP0*RC G0XP0*RC GF0XP0*RC GG0XP0*RC GA07XP0*RC G07XP0*RC GC07XP0*RC G07XP0*RC GF07XP0*RC GG07XP0*RC GA00XP0*RC G00XP0*RC GC00XP0*RC G00XP0*RC GF00XP0*RC GG00XP0*RC GA0XP0*RC G0XP0*RC GC0XP0*RC G0XP0*RC GF0XP0*RC GG0XP0*RC ,10 1,0 1,10 1,290 2,100,60 8,210 1,70 1,80,190,60 8,210 1,0 1,90 2,0,20,90 8,760 1,20 2,00 2,60,0 6,210 9,00 1,90 2,10 2,90,760 6,90 9,80 2,60 2,80,100 7,00 10,00,020,10,690,070,00,960,070 6,80,70 9,0 1,700 2,80 6,20 6,090 8,10 9,880 1,190 6,20 6,10 8,670 10,10 1,210 26,80 8, 6,760 9,00 10,90 1,700,620 1,70 7,070 9,60 11,20 16,70 28,870 10,00 12,90 18,20 1,60 6,260 1,710 2,0 2,80 2,70,0 2,80,860,220,70,260 7,700 1,00 20,20,10,70,60 7,980 1,110 20,20,600,880,860 8,0 1,810 21,890,790,080 6,160 8,80 1,20 2,260,980,80 6,60 9,10 16,220 2,620,60,890 7,060 10,260 17,0 2, 7,606 10,10 9,00 12,0 10, 12,680 17,170 1,2 19,0 2,00,20 9,610 91,280 1,170 20,0 2,70,00 62,760 91,280 16,010 21,710 26,070 8,00 6,880 97,70 16,860 22,600,00,20 69,00 10,70 17,700 2,90 28,70 1,860 72,10 109,20 19,0 26,200 1,00,60 78,20 11,610 1,20 1, ,880 1,10 1, 1,80 2,100 1, 0 2,210 2,810,890 8,80 1,10 1, ,870,920 8, 1,10 1,610 2,00 2,920,080 9,180 1,820 1, 2,10 2,,10 9,80 16,70 1,680 2,80,00,0 9,20 17,110 1,720 2,60,120,0 9,820 17,60,70 7,70,870 8,60 6,0 8,80 6, ,890 9,80 1 2,280 67,0 7,070 9,920 12,770 21,890, 67,0 7,160 10,20 12, 22,600 0,80 70,70 7,0 10,280 1,210 22,820 1,720 7,260 7,70 10,90 1,20 2,0 2,0 76,110 7, 10,90 1,880 2,20,680 77, ,080 1,10 2,10 2,90 2,70,770,600 6,90 12,70 20,20,170,10 7,80 1,110 21,0,20,690,710 8,0 1,0 2,080,790,10 6,20 9,280 17,070 26,70,180,720 6,90 10,0 18, 29,0,020 6,80 8,00 12,10 22,00, ,0 2, ,90 2, ,760 2, ,00 1,90, ,170 2,110, ,0 2,90,820,0,190,60,0,690,620,10 2,820 2,780 2,70 2,670 2,0 2,00 2,670 2,0 2,90 2,0 2,00 2,290 2,0 2,90 2,60 2,00 2,290 2,180 2,00 2,70 2,0 2,290 2, ,260 2,20 2,180 2,000 2,060 2,00 2,000 1,920 1, , ,091 1,17 2,11,66 7, ,120 1,6 2,,79 7, ,16 1,0 2,,92 8,20 8 1,19 1,6 2,96,08 8, ,26 2,92,172 8, ,0 1,687 2,72,1 8,979 2,290,70 2,90,770,10,120,0,,80 6,00 10,280 20,70,90,980 6,0 10,80 21,0,220,600,180 6,720 10, ,00,710,10 6, ,0 7,70,821,00 7,120 11,0 2,010 8,980,00,800 7,00 12,120, , ,20 1,110 1,20 2,60,00 8,0 1,10 1,0 2,00 2,,670 8,99 1,910 1,0 2,80,080 9,69 17,00 1, 2,0,00,80 10,16 18,90 1,760 2,20,0,800 11,17 20,0 1,,717 6,0 12,696 22, , ,020 1, , ,180 2, ,260 2, ,0 2,60 *NUMER* eight LOA RATINGS Outside iameter NOMINAL IMENSIONS iameter M i M o ore idth in. mm in. mm in. mm in. mm in. mm in. mm in. lbs. kg lbf N lbf N lbf N lbf N lbf - in Nm lbf - in Nm lbs. kg lbf N lbf N lbf N lbf N lbf - in Nm lbf - in Nm

29 7 6 G-SERIES GA060XP0*RC G060XP0*RC GC060XP0*RC G060XP0*RC GF060XP0*RC GG060XP0*RC GA06XP0*RC G06XP0*RC GC06XP0*RC G06XP0*RC GF06XP0*RC GG06XP0*RC GA070XP0*RC G070XP0*RC GC070XP0*RC G070XP0*RC GF070XP0*RC GG070XP0*RC GA07XP0*RC G07XP0*RC GC07XP0*RC G07XP0*RC GF07XP0*RC GG07XP0*RC GA080XP0*RC G080XP0*RC GC080XP0*RC G080XP0*RC GF080XP0*RC GG080XP0*RC GA090XP0*RC G090XP0*RC GC090XP0*RC G090XP0*RC GF090XP0*RC GG090XP0*RC GA100XP0*RC G100XP0*RC GC100XP0*RC G100XP0*RC GF100XP0*RC GG100XP0*RC GA110XP0*RC G110XP0*RC ,60,0 7,620 11,90 2,00 2,760,10,790 8,180 12,00 2,200 2,,0,10 8,70 1,10 2,0,170,790,70 9,10 1,680,70,00,810 9,880 2,810,780,0 6,00 11,000 16,20,110,190, 7,180 12,10 18,060,10,90 8,2 11,0 1, 19,790,900, ,280 1,720 21,10 6,0,60 9,790 1,210 1,790 22,820 8,920 8,10 10,0 16,860 2,0 1,10 60,80 11,120 1, 17,90 2,80,90 6, ,810 20,060 28,910 8,90 7,00 1,80 18,60 22,200 1,90,960 80,0 1,170 20,20,70 6,00 7, 11,120 19,00 28,70,120 6,910 8,0 11, 20,60 0,100,00 7,20 8,870 12,80 21,870 2,80,880 7,920 9,70 1,680 2,280,200 6,260 8,0 10,070 1,0 2,690 6,90 7,020 9,0 11,0 16,20,0 1,00 10,60 12,70 17,960 0,0,10 8,0 11,80 21,08 28,70 9,60 8,70 1,800 22,77 0,70 6,790,20 91,010 1,890 2,70,010,60 7,070 97,280 16,00 26,160,20 2,120 60,80 10,0 12,10,80 7,00,790 6, ,80 16,20 1,20 2,00 0,10 72, ,70 182,60,610 6,0,70 79,890 1, ,790 7,,070 2,0,220,610 10,10 18,290 1,80 2,90,00,70 10,80 18,20 1,80 2,,20,880 10,60 19,0 1,890 2,70 6,060 10,90 19,60 1, 2,790,60 6,170 11,190 20,20 2,00 2,890,690 6,10 11,0 21,020 2,180,90 6,680 12,100 21,790 2,20,280 7,920 11,00 1,20 2,90,10 81,60 8,180 11,20 1,680 2,0 6,170 82,80 8,20 11,80 1,210 26,160 7,0 8,980 8,10 12,10 1,80 26,960 8,620 86,60 8,760 12,10 1,80,0 9,780 89, 9, ,10 28,0,70 9,00 9,700 1,700 17,80 29,710,820 96,90 10,20 1,90,90 8,080 9,770 1,0 2,710 0,220 6,910 9,10 11,70 16,760 29,,10 7,980 10, ,20,890 2,0 9,120 12,80 1,910 21,890 8,10 8,10 10,0 1,020 16,870 2,710 66,80 12, 17,600 21,10 0,870,60 82,080 1,90 21,80 2,880 7,710 6,210 99,20 19,210 2, ,0 2,900, ,060 1,280 1,890,0, ,20 1,80 2,170,80,90 1,00 1,00 1,680 2,70,0 6,70 1,170 1,80 1,910 2,790,880 7,0 1,70 1, 2,0,90 6,060 9,0 1,800 2,0 2,920,260 7,70 11,220 2,170 2,90 1,920 1,880 1,80 1,710 1,760 1,710 1, 1, 1,60 1,0 1,0 1,00 1,0 1,20 1,00 1,0 1,10 1,0 1,0 1,0 1,10 1,70 1,0 1,00 1,290 1,280 1,260 1,20 1,200 1,170 1,160 1,160 1,10 1,120 1,090 1,070 1, ,71 2,8,6 9,0 1,001 1, 1,8 2,980,880 9,71 1,06 1,98 1,91,10 6,10 10,208 1,089 1,9 2,007,222 6,2 10,10 1,11 1,618 2,082,8 6, 10,882 1,212 1,72 2,226,61 6,97 11,26 1,289 1,81 2,6,776 7,2 12,17 1,62 1,9,20 6,100 7,870 12,700 2,10 2,0,0 6,80 8,20 1,260 26,160,210, 6, 8,90 1,800,10,10,80 6,90 8,90 1,0 28,10 6,10,00 7,200 9,260 1,80 29,070 8,10,0 7,700 9,900 1,80 0,900,0,70 8,190 10,20 16,800 2,,00 6,060 8, 2,20,27,2 7,290 1,11 2,610 2,,668,77 8,00 1,99,770 2,8,109,1 8,810 17,7 0,90,16,68,90 9,700 19,68,196,99,0 6,2 10,6 21, 6,7,20 6,00 7,80 12,69 2,10,20,96 7,121 9,201 1,872 29,608 0,12,70 8, ,620 2, ,810, ,000 2,000, ,210, ,200 2,20, ,0 2,870, ,00 1,680,0, 90 *NUMER* eight LOA RATINGS Outside iameter NOMINAL IMENSIONS iameter M i M o ore idth SEALE (COMO) -POINT CONTACT, X-TYPE THIN SECTION ALL EARINGS in. mm in. mm in. mm in. mm in. mm in. mm in. lbs. kg lbf N lbf N lbf N lbf N lbf - in Nm lbf - in Nm lbs. kg lbf N lbf N lbf N lbf N lbf - in Nm lbf - in Nm

30 SEALE (COMO) -POINT CONTACT, X-TYPE THIN SECTION ALL EARINGS *NUMER* GC110XP0*RC G110XP0*RC GF110XP0*RC GG110XP0*RC GA120XP0*RC G120XP0*RC GC120XP0*RC G120XP0*RC GF120XP0*RC GG120XP0*RC ore Outside iameter NOMINAL IMENSIONS M i idth M o iameter in. mm in. mm in. mm in. mm in. mm in. mm in LOA RATINGS eight lbs. kg lbf N lbf N lbf N lbf N lbf - in Nm lbf - in Nm ,70 7,870 1,260 19,700,720,000,90 8,0 1,0 21,0 2,0,010 8,980 87,0 16,0 22,20 26,70 8,00 6,010 9,90 2,96,981 7,721 12,7 1, 2,0 2,622,178 8,08 1,1 1 17,710,0 6,670 6,70 9,100 11, 18,80,960 9,20 1,680 19,670,10 9,20 9,00 1 1,880 21,80,,0 60,80 87,00 17,60 219,070 1,70,600 66,190 9, ,000 27,10,180 6,80 12,90 22,0 2,0,70,20 7,080 1,190 2,180 18,90 0,80,60 100,220 10,900 1,0 19, 1,90 8,670 10,110 1,110,20 77, ,200 22,770 0,770 6,80,0 91,70 18,700,0,110 8,800 1,0 2,70,160 6,00 10,60 1,670 10,6 17,17,02 7,7 6,87 9,6 12,17 19,90 8,666 6,9 1,200 1,90,80 6, ,070 1,80 2,210,70 7,0 1,00 1,00 1,020 1, G-SERIES Contact your RC Sales Engineer for sizes above ore. 8 9

31 SEALE (COMO) RAIAL CONTACT, C-TYPE THIN SECTION ALL EARINGS GU-SERIES *NUMER* GU00CP0*RC GU02CP0*RC GU0CP0*RC GU07CP0*RC GU00CP0*RC GU0CP0*RC GU060CP0*RC GU06CP0*RC GU070CP0*RC GU07CP0*RC GU080CP0*RC GU090CP0*RC GU100CP0*RC GU110CP0*RC GU120CP0*RC NOMINAL IMENSIONS LOA RATINGS M i M o ore Outside iameter idth iameter eight in. mm in. mm in. mm in. mm in. mm in. lbs. kg lbf N lbf N lbf N lbf N lbf - in Nm lbf - in Nm ,100 2,0 2,60 2,90 2,80,1,0,790,00,0,,70,90 9,0 9,880 10,10 10,90 11,20 12,90 1, 1,70 1,790 16,860 17,90 20,060 22,200 2,0 26,70 1,290 1,20 1,0 1,70 1,0 1,0 1,90 1,0 1,70 1, 1,70 1,781 1,879 1,97,70,870 6,010 6,090 6,180 6,10 6,0 6,810 6,980 7,120 7,0 7,700 7,920 8,60 8,780,110,0,0,610,780,110,0,790,120,0,790 6,70 7,10 7,800 8,80 1,80 1,0 1,00 16,060 16,810 18,280 19,790 21,10 22,770 2,20 2,760 28,780 1,760,700 7,720,70,80,910,,00,170,20,0,0,60,770,020,170,280,70 16,60 17,00 17,0 17, 17, 18,0 19,220 19,70 20,20 20,60 21,220 22,0 2,000 2,90 2,0 2,720,00,60,700,060,80,670 6,80 7,0 8,90 9,700 12,120 1,810 17,70 20, ,70 1,670 2,010 2,70,280,0,070,0,900,0 6,110 6,710 7,00 7, 9,10 10,70 12,020 1, ,060 1,210 1,60 1,0,,60,280,120 2,980 2,720 2,0 2,0 2,170 2,00 1,910 1,700 1,10 1,

32 SEALE (COM0) -POINT CONTACT, X-TYPE THIN SECTION ALL EARINGS GU-SERIES *NUMER* GU00XP0*RC GU02XP0*RC GU0XP0*RC GU07XP0*RC GU00XP0*RC GU0XP0*RC GU060XP0*RC GU06XP0*RC GU070XP0*RC GU07XP0*RC GU080XP0*RC GU090XP0*RC GU100XP0*RC GU110XP0*RC GU120XP0*RC NOMINAL IMENSIONS LOA RATINGS M i M o ore Outside iameter idth iameter eight in. mm in. mm in. mm in. mm in. mm in. lbs. kg lbf N lbf N lbf N lbf N lbf - in Nm lbf - in Nm ,100 2,0 2,60 2,90 2,80,10,0,790,00,0,,70,90 9,0 9,880 10,10 10,90 11,20 12,90 1, 1,720 1,790 16,860 17,90 20,060 22,200 2,0 26,70 1,17 1,6 1,0 1,6 1,687 1,8 1,91 2,007 2,082 2,226 2,6 2,96 2,622 6,00 6,0 6,720 6,920 7,120 7,00 7,870 8,20 8,90 8,90 9,260 9,900 10, ,,260,60,860 6,160 6,60 7,060 7, 8,0 8,870 9,70 10,070 11,0 12,70 1,680 1,880 2,00 2,70 26,070,00 28,70 1,00 6,790,60 2,120,790 0,10,70 60,80 66,190 2,810 2,870 2,920 2,,00,120,220,00,20,60,690,90,180, ,770 12, 1,210 1,20 1,880 1,20 1,680 1,210 1,80 1,80 16,10 17,80 18,90 19,,600,10,710 6,20 6,90 8,00 9,770 11,70 1 1,910 16,870 21,10 2,880 1,110 6, ,280 1,80 1,680 1,910 2,0 2,920,0,160 2,60 2, 2,80,00,0,717,2,77,1,90 6,2 7,80 9,201 10,6 12, ,00 1,200 1,80 2,280 2,160 2,00 1,90 1,860 1,700 1,70 1,60 1,60 1,0 1,190 1,

33 6 N-SERIES Steel with Thin ense Chrome Coating Large iameter Light eight Small Cross Section Snap-Over Separator RAIAL CONTACT, C-TYPE THIN SECTION ALL EARINGS NAA Series: Cross Section Size: " NA " N /16" NC " N " NF /" NG 1" *NUMER* eight LOA RATINGS iameter Outside iameter NOMINAL IMENSIONS Land iameter Li -Inner Ring Lo -Outer Ring ore NAA10CLO*RC NAA1CLO*RC NAA17CLO*RC NA020CPO*RC N020CPO*RC NA02CPO*RC N02CPO*RC NA00CPO*RC N00CPO*RC NA0CPO*RC N0CPO*RC NA00CPO*RC N00CPO*RC NC00CPO*RC N00CPO*RC NF00CPO*RC NG00CPO*RC NA02CPO*RC N02CPO*RC NC02CPO*RC N02CPO*RC NF02CPO*RC NG02CPO*RC NA0CPO*RC N0CPO*RC NC0CPO*RC N0CPO*RC NF0CPO*RC NG0CPO*RC NA07CPO*RC N07CPO*RC NC07CPO*RC N07CPO*RC NF07CPO*RC NG07CPO*RC NA00CPO*RC N00CPO*RC NC00CPO*RC N00CPO*RC NF00CPO*RC NG00CPO*RC NA0CPO*RC N0CPO*RC NC0CPO*RC N0CPO*RC NF0CPO*RC idth ,10 1,0 1,10 1,290 2,100,60 8,210 1,70 1,80,190,60 8,210 1,0 1,90 2,0,20,90 8,760 1,20 2,00 2,60,0 6,210 9,00 1,90 2,10 2,90,760 6,90 9,80 2,60 2,80,100 7,00 1,290 2,02,020,10,690,070,00,960,070 6,80,70 9,0 1,700 2,80 6,20 6,090 8,10 9,880 1,190 6,20 6,10 8,670 10,10 1,210 26,80 8, 6,760 9,00 10,90 1,700,620 1,70 7,070 9,60 11,20 16,70 28,870 10,00 12,90 18,20 1, ,080 1,60 1,10 1,0 2,00 2,0 1,980 2,0,110,90 7,980 12,960 2,70,0,110 8,00 12,960 2,200 2,920,0,60 8,820 1,820 2,10,00,610,620 9,220 1,680 2,20,210,780, 9,600 1,0 2,,00,110 6,80 10,70 2,10 2,890,87,800 6,90,80 6,810 9,120 10,10 8,810 11,700 1,80 22,020,00 7, 9,00 12,190 1,0 22,70 7,70 7, 9,790 12, 1,00 2,290,20 61,70 10, ,060 2,000 1,010 6,00 10,760 1,280 16,810 26,60 2,700 69,170 11,790 1,70 18,280 28,820 6, ,020 1,0 1,60 2,20 2,0 1,880 2,680 1, 2,810 2,080 2,90,70 6,20 11,20 19,0 2,110,000,80 6,80 11,810 19,0 2,170,910 6,820 12,200 20,290,110, 6,80 12,90 21,10 2,20,190,00 7,00 12,710 21,90 2,20,280,170 7,0 1,170,910,0,916 7,00 10,20 7,870 11,170 8,60 11,920 8,80 1 9,20 1,120 16,60 29,000 0,800 86,70 9,0 1,0 17,00 29,0 2,0 86,70 9, 1,700 17,0 0,0,0 90,20 9,880 1,80 17, 0,0,60 9, 9,960 1,190 17, 1,20 6,0 97,60 10,20 1,90 18,0 2,0 8, ,60 1,20 1,680 2,0 2,720,0 7,80 12,960 1,880,00,860 8,00 1,600 2,810,60,60 9,0 1,200 2,10,700,910 10,10 16,890 2,0,10,060 6,70 11,00 18,,00,070,80 12, , ,00 1, ,10 1, ,20 2, ,70 16,80 11,80 10,20 8,890 8, 7,0 7,110 6,10 6,00,0,20,710,60,70,0,210,0,80,20,210,210,160,100,60,90,900,60,760,720,60,0,0,00, ,020 1,290 2,20,90 6, ,00 1,20 2,0,070 6, ,060 1,0 2,0,210 7, ,070 1,70 2,60,10 7, ,0 2,0,80 7, ,10 1,0 2,0,0 1,0 1,60 2,0 2,90,60 2,710,80 2,890,090,10,0,70 10,010 17,0 29,800,20,80,870 10,100 18,100 29,800,0,720 6,010 10,0 18,70 1,10,80,760 6,090 10,00 19,170 2,0,0,890 6,180 10,810 19,80,670,60,00 6,10 11,170 20, ,070 1,10 1,220 1,90 2,10 2,0,280,870 10,80 19,0 2,70,0 6,20 11,810 20,10 2,060 2,960 6,820 12,810 22,20,10,070 7,180 1,70 2,00 2,0,0,0 7,70 1,620 26,0 2,,900 8,720 16, ,20 2, ,0 2, ,0 2, ,0 2, , 2, ,860 in. mm in. mm in. mm in. mm in. mm in. mm in. lbs. kg lbf N lbf N lbf N lbf N lbf - in Nm lbf - in Nm

34 67 N-SERIES 66 NAA Series: Cross Section Size: " NA " N /16" NC " N " NF /" NG 1" RAIAL CONTACT, C-TYPE THIN SECTION ALL EARINGS 2100 Steel with Thin ense Chrome Coating Large iameter Light eight Small Cross Section Snap-Over Separator *NUMER* eight LOA RATINGS iameter Outside iameter NOMINAL IMENSIONS Land iameter Li -Inner Ring Lo -Outer Ring ore NG0CPO*RC NA060CPO*RC N060CPO*RC NC060CPO*RC N060CPO*RC NF060CPO*RC NG060CPO*RC NA06CPO*RC N06CPO*RC NC06CPO*RC N06CPO*RC NF06CPO*RC NG06CPO*RC NA070CPO*RC N070CPO*RC NC070CPO*RC N070CPO*RC NF070CPO*RC NG070CPO*RC NA07CPO*RC N07CPO*RC NC07CPO*RC N07CPO*RC NF07CPO*RC NG07CPO*RC NA080CPO*RC N080CPO*RC NC080CPO*RC N080CPO*RC NF080CPO*RC NG080CPO*RC NA090CPO*RC N090CPO*RC NC090CPO*RC N090CPO*RC NF090CPO*RC NG090CPO*RC NA100CPO*RC N100CPO*RC NC100CPO*RC N100CPO*RC NF100CPO*RC NG100CPO*RC idth 10,00 2,60,0 7,620 11,90 2,00 2,760,10,790 8,180 12,00 2,200 2,,0,10 8,70 1,10 2,0,170,790,70 9,10 10,60,70,00,810 9,880 2,810,780,0 6,00 11,000 16,20,110,190, 7,180 12,10 18,060 6,260 8,0 11,0 1, 19,790,900,110 9,120 12,280 1,720 21,10 6,0,60 9,790 1,210 1,790 22,820 8,920 8,10 10,0 16,860 2,0 1,10 7,0 11,120 1, 17,90 2,80,90 6, ,810 20,060 28,910 8,90 7,00 1,80 18,60 22,200 1,90,960 80,0 16,10 2,870,790,0 6, 11,10 18,10,100,080,790 7, ,910,20,80,120 8,020 12,670 20,20,0,670,0 8,0 1,0 21,0,770,960,790 9,00 1,200 22,890,210,0 6,70 10,060 1,70 2,0, 6,10 7,10 11,080 17,260,620 7,000 12,770 16,860 19,790 1,090 9,0 80,690 1,790 18,10 21,10,60 2,90 8,120 19,80 22,770,670 6,60 91,280 1,70 20,770 2,20 7,90 9,780 9,610 16,770 22,060 2,760 0,210, ,820 18,70 2,60 28,780,70 70, ,10 20,70,0 1,760 9,290 76, ,70 2,20,80,20 7,00 1,0 2,20 2,0,70,0 7,680 1,900 2,700 2,20,600,0 7,910 1,280 2,70 2,80,710,60 8,120 1,610 2, 2,60,720,770 8,290 26,960 2,70,860,020 8,620 1,0 28,200,00,170 8,900 16,060 29, ,200 10,760 1,00 19,220,60 60, ,180 10,900 1,0 19,70,160 61,80 109,870 11,210 16,010 20,20,190,20 11,0 11,80 16,00 20,60 6,120 6, 11,610 11,70 16,0 21,220 6,880 66, ,920 12,10 17,170 22,0 8,0 69,170 12,0 12,720 18,020 2,000,90 71,0 129,90 21,0,90,790,670 9,090 1,00 2,0,180,60 6,80 10,00 17,20 28,60,810 6,00 7,0 12,00 19,60 2,80,90 7,00 8,90 1, 22,170 6,160 6,220 8,20 9,700 1,70 2,80 1,200 7,800 10,20 12,120 19,120 0,690 0,0 9,60 12,0 1,810 2,0 7,110 60,760 2, ,00 1,700 2, ,190 1, ,60, , ,70 2,810, 880 1,170 1,70 2,160,70,710 1,080 1,0 1,670 2,0,190 6,860,170,10 2,960 2,960 2,90 2,910 2,760 2,670 2,760 2,70 2,710 2,670 2,80 2,80 2,60 2,0 2,20 2,0 2,20 2,10 2,0 2,0 2,290 2,160 2,10 2,10 2,110 2,00 2,000 1,90 1,90 1,90 1,860 1,820 7, ,170 1,90 2,80, 8,0 80 1,200 1,0 2,,790 8, ,20 1,70 2,70,920 8, ,280 2,800,00 8, ,280 1,,10 9, ,0 1,70 2,,60 9,720 1,00 1,781,0 10,00,920,690,200 6,0 11,80 20,70 7,20,780,0 6,810 11,790 21,10 7,900,870,20 6,980 12,10 21,890,00,960,690 7,120 12,60 22,20,860,00,690 7,0 12, ,70,180,920 7,700 1,210 2,80,20,00 6,20 7,920 1, 2,690, 29,80,020,0,0 9,70 18,260,00,10,70 6,110 10,760 20,160 7,00,,260 6,710 11,870 22,10 1,210,800 7,00 12, 2,100,190,0 6,190 7, 1,090 26,070 8,20,00 7,190 9,10 16,0 0,20 6,0,860 8,0 10,70 18,680,0 6,00, ,060, ,220 2,280, ,0, ,70 2,720, ,90 2,90, ,060 1,80,0 6, ,210 2,110,900 7,20 in. mm in. mm in. mm in. mm in. mm in. mm in. lbs. kg lbf N lbf N lbf N lbf N lbf - in Nm lbf - in Nm

35 69 N-SERIES 68 NAA Series: Cross Section Size: " NA " N /16" NC " N " NF /" NG 1" RAIAL CONTACT, C-TYPE THIN SECTION ALL EARINGS 2100 Steel with Thin ense Chrome Coating Large iameter Light eight Small Cross Section Snap-Over Separator *NUMER* eight LOA RATINGS iameter Outside iameter NOMINAL IMENSIONS Land iameter Li -Inner Ring Lo -Outer Ring ore NA110CPO*RC N110CPO*RC NC110CPO*RC N110CPO*RC NF110CPO*RC NG110CPO*RC NA120CPO*RC N120CPO*RC NC120CPO*RC N120CPO*RC NF120CPO*RC NG120CPO*RC N10CPO*RC NC10CPO*RC N10CPO*RC NF10CPO*RC NG10CPO*RC N160CPO*RC NC160CPO*RC N160CPO*RC NF160CPO*RC NG160CPO*RC N180CPO*RC NC180CPO*RC N180CPO*RC NF180CPO*RC NG180CPO*RC N200CPO*RC NC200CPO*RC N200CPO*RC NF200CPO*RC NG200CPO*RC NC20CPO*RC N20CPO*RC NF20CPO*RC NG20CPO*RC NC00CPO*RC N00CPO*RC NF00CPO*RC NG00CPO*RC NF0CPO*RC NG0CPO*RC NF00CPO*RC NG00CPO*RC idth,10,90,70 7,870 1,260 19,700,720,000,90 8,0 1,0 21,0,810 6,910 9,920 16, 2,620 6,620 7,880 11,290 18,900,910 7,0 8,80 12, 21,160 1,190 8,20 9,800 1,020 2,20,70 12,200 17,0 29,060 2,680 1,610 20,860,700 0,890 0,0 9,100, 67,10 1,170 20,20 2,0,010 8,980 87,0 16,0 22,20 26,70 8,00 6,010 9,90 2,80 0,70,10 7, ,20 29,0,00 0,220 8,070 12,10,090,20 6,0 9,120 18,70 6,700,90 62,60 10,180 1,0,0 77,80 129,0 189,80 6, 92,790 1,0 226,70 179,90 262,890 20,70 299,10,110 6,700 7,800 12,100 18,790 29,980,60 7,290 8,80 1,10 20,0 2,0 8,0 9,820 1,180 2,10 7,080 9,620 11,160 17,20 26,80 1,810 10,780 12,0 19,260 29,60 6,0 11,90 1,80 21,20 2,620,20 17,200 26,10 0,0,110 20,60 7,960 7,90,610 86,680,00 98,90 22,70 29,800,700,820 8,80 1,60 2,70 2,0 7,720 8,0 90,80 1,900 7,90,680 67,20 10,10 16,90 2,790 9,60 76,60 117,790 18,980 7,90, 8,670 11,90 207,020,110 61,610 9,80 2,90 76,0 117,80 179,10 280,70 91,60 10,00 21,0,0 27,70 8,70 281,70 8,0 2,980,10,280 9,220 16,610 0,060,0,70 9,0 17,200 0,,20,800 10,00 18,090 2,710,800 6,00 10,00 19,000,0,00 6,0 10,870 19,980,,260 6,670 11,80 20,70 6,780 7,00 12,260 21,910 0,100 8,000 1,0 2,620 2,0 2,,120 26,0 7,080 1,260 18,70 2,90 1,010 7,880 1,710 1,700 18, 2,0 2,80 76,0 17,80 20,110 2,800,620 80,70 1,00 21,0 26,910 6,710 8,20 12,0 22,60 28,20 8,0 88,880 18,620 2,00 29,670 0,620 91,00 1,610 2,70,0 97,60 178,70,90 9,780 10, , , , , ,20 11,00 1,160 17,70,80,160 71,90 1,620 17,90 20,980 2,80,860 8,100 2,180 28,20,020 69,00 111,20 1,70 6,0 6,80 88,690 12,10,90,960 71,0 110,80 176,870 8,20 6,0 87,00 1,0 21,210 87,290 1, ,0 28,10 12, ,20 29, 6,60 7,620 62,100,90 808,20 1,00 1,710 2,010,10, 8,10 2,00 2,70,710,860 9,00 2,70,190, 7,800 12,70,0,10 6,20 10,020 16,060,60,190 8,00 12,20 19,980,80 6,80 9,870 1,00 2,20 9,860 1,220 2,0 7,080 1,110 21,70,0,90 70,0 8,290 91,0 1,760 1,70 1,700 1,670 1,0 1,620 1,620 1,70 1,00 1,0 1,80 1,60 1,0 1,20 1,220 1,210 1,190 1,180 1,090 1,090 1,080 1,070 1, ,00 1,6 1,879,180,8 10,60 1,078 1, 1,97,20 6,10 10,690 1,680 2,1,60 6,620 11,280 1,812 2,21,688 7,10 11,820 1,96 2,78,9 7,7 12,67 2,0 2,626,16 7,986 1,0 2,962,689 8,9 1,91,260,1 9,828 1,9 10,60 17,19 11,02 18,07,80 6,0 8,60 1,10 2,90 6,080,800 6,80 8,780,160 7,0 7,70 9,80 1,0 29,0 0,180 8,060 10,20 16,10 2,80 8,610 11,020 17,90,620,010 9,10 11,680 18,20,20 8,020 1,180 20,860,870 6,900 1,00 22,920,720 71,010 7,160 76,90 0,0 81,0 6,700 9,0 12,020 21,210,00 72,10 7,0 10,0 1,0 2,070,80 80,80 12,90 16,680 29,100,80 98,10 1,670 19,80,,0 116,0 18,90 2 0,200 7,910 1,0 21,70,170 6,680 8,80 1,90 7,070 62,0 112,80 208,0 8,610 82,010 1,0 2,80 178,0 17, 216,20 86, ,060 1,60 2,00,10 8, ,190 1,0 2,720,90 9,100 1,60 1,880,290 6,00 11,090 2,20,920 7,190 1,170 2,,0 8,60 1,10 2,10,0 9, 17,60,190 7,060 12,70 2,60,90 9,0 16,10 29,780 20,170,890 2,0,620 in. mm in. mm in. mm in. mm in. mm in. mm in. lbs. kg lbf N lbf N lbf N lbf N lbf - in Nm lbf - in Nm

36 71 N-SERIES 70 NAA NA " N /16" NC " N " NF /" NG 1" Series: Cross Section Size: " L L s i L o to clear f max ( places) 1 ANGULAR CONTACT, A-TYPE THIN SECTION ALL EARINGS *NUMER* eight LOA RATINGS iameter Outside iameter NOMINAL IMENSIONS Land iameter Li -Inner Ring Lo -Outer Ring Ls -Counter ore ore NAA10AGO*RC NAA1AGO*RC NAA17AGO*RC NA020ARO*RC N020ARO*RC NA02ARO*RC N02ARO*RC NA00ARO*RC N00ARO*RC NA0ARO*RC N0ARO*RC NA00ARO*RC N00ARO*RC NC00ARO*RC N00ARO*RC NF00ARO*RC NG00ARO*RC NA02ARO*RC N02ARO*RC NC02ARO*RC N02ARO*RC NF02ARO*RC NG02ARO*RC NA0ARO*RC N0ARO*RC NC0ARO*RC N0ARO*RC NF0ARO*RC NG0ARO*RC NA07ARO*RC N07ARO*RC NC07ARO*RC N07ARO*RC NF07ARO*RC NG07ARO*RC NA00ARO*RC N00ARO*RC NC00ARO*RC N00ARO*RC NF00ARO*RC NG00ARO*RC NA0ARO*RC N0ARO*RC NC0ARO*RC N0ARO*RC NF0ARO*RC idth , ,0 1,10 1,0 1,10 1,790 1,90 2,00 2,0,0 6,0 9,80 1,80 2,10 2,710,70 6,600 9,90 1, 16,801,90 7,090 10,0 2,0,020,10 7,0 10,900 1,80,180,0 7,70 11,70 2,020 2,70,0,70 8,10 1,0 2,10 2,82,0,80,0,960,070 6,890,80 7,960 6,0 9,070 11,0 1,790 28,20 2,170 7,00 9,60 12,00 16,680 29,60,260 7,80 7,70 12,720 17,70 6,0 10,0 1,0 18,60 2,610 8,90 8,180 11,120 1,10 19,10,670 0,80 8, 12,190 1,00 21,080 6,960 1,80 1,80 2,280,10 2,780,860,290,70,790,180,00,890 7,60 10,260 18,0,60,0 6,200 7,820 10,80 19,00 28,70,810 6,00 8,0 11,00 20,60 0,100,060 6,910 8,720 11, 21,160 1,60,10 7,210 9,170 12,0 21,870 2,80,820 7,920 9,920 1,680 2,980,10 6,10 8,10 10,10 1,010 12,70 17,170 1,0 19,880 16,860 2,00 19,10 26,200 2,70,60 81,80 121,700 20,20,80,790 8,170 8,70 1,800 21,00 28,910 6,790 0,710 91,010 1,890 22,0 0,70 8,790,20 9,120 1,90 2,620 2,070 0,790,780 97,280 16,00 2,890,20,10 60,80 106, ,1 1,70 2,60 1,860 2,680 1,980 2,800 2,070 2, 2,180,10,080 6,020 12,620 21,290 2,20,170,180 6, 12,70 21, 2,260,20,260 7, ,690 2,10,290,0 7,280 1,80 2,70 2,60,0,0 7,00 1 2,00 2,10,0 7, 1,980,0,890 6,29 7,700 10,90 8,0 11,920 8,810 12,60 9,210 1,210 9,700 1,920 18,10 26,780 6,10 9,700 9,960 18,90 1,090 6,670 97,820 10,00 1,10 18,90 1,760 8, ,90 10,280 1,0 19,10 2,80 9,20 10,90 10,00 19,790 2,920 9, ,90 10,720 1,80 20,190 62,190 16,80 11,80 10,20 8,890 8, 7,0 7,110 6,10 6,00,0,20,710,60,70,0,210,0,80,20,210,210,160,100,60,90,900,60,760,720,60,0,0,00, , ,080 1,10 2,070,0 7, ,090 1,0 2,10,0 7, ,120 1,70 2,60,0 7, ,10 1,00 2,0,610 8, ,160 2,0, 8, ,200 1,60 2,60,820 1,70 1,690 2,1 2,670,780 2,80,090,020,10,0,0,800 6,0 9,210 19,0 2,,0,80 6,10 10,720 19,0,720,70,980 6,0 10,90 20,20,790,60,070 6,670 11,170 20,0,80,600,160 6,80 11,0 20,680 6,880,690,0 6,90 11,70 21,0 in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. lbs. kg lbf N lbf N lbf N lbf N lbf - in Nm lbf - in Nm 2100 Steel with Thin ense Chrome Coating Large iameter Light eight Small Cross Section Circular Pocket Separator

37 7 N-SERIES 72 NAA NA " N /16" NC " N " NF /" NG 1" Series: Cross Section Size: " L L s i L o to clear f max ( places) 1 ANGULAR CONTACT, A-TYPE THIN SECTION ALL EARINGS *NUMER* eight LOA RATINGS iameter Outside iameter NOMINAL IMENSIONS Land iameter Li -Inner Ring Lo -Outer Ring Ls -Counter ore ore NG0ARO*RC NA060ARO*RC N060ARO*RC NC060ARO*RC N060ARO*RC NF060ARO*RC NG060ARO*RC NA06ARO*RC N06ARO*RC NC06ARO*RC N06ARO*RC NF06ARO*RC NG06ARO*RC NA070ARO*RC N070ARO*RC NC070ARO*RC N070ARO*RC NF070ARO*RC NG070ARO*RC NA07ARO*RC N07ARO*RC NC07ARO*RC N07ARO*RC NF07ARO*RC NG07ARO*RC NA080ARO*RC N080ARO*RC NC080ARO*RC N080ARO*RC NF080ARO*RC NG080ARO*RC NA090ARO*RC N090ARO*RC NC090ARO*RC N090ARO*RC NF090ARO*RC NG090ARO*RC NA100ARO*RC N100ARO*RC NC100ARO*RC N100ARO*RC NF100ARO*RC NG100ARO*RC idth 12,20 2,190 2,,70,10 9,00 1,0 2,70,060,0 9,770 1,220 2,0,0,20,920 10,0 1,160 2,720,700,0 6,20 11,000 16,110 2,890,90,90 6,710 11,70 17,060,20,00,20 7,00 1,190 18,960,90,890 6,10 8,290 1,20 20,80,800 9,70 1,00 16,680 22,820 0,210 9,00 10,0 1,20 18,060 2,600,60,20 11,00 1,0 19,220 26,0 6,70 67,0 12,100 16,60 20,600 28,110 8,90 71, 1 17,0 22,020 29,80 2,180 7,890 1,10 19,70 2,0,60 8,670 8,0 1, 2,10 6,880 6,10 92,70,70 6,20 8,0 10,820 1,820 26,100 8,00 6,80 9,20 11,720 1,960 28,220 1,00 7,0 9,960 12,70 17,100 0,0,780 7,80 10,670 1,80 18,20 1,70 6,0 8,0 11,80 1,280 19,80,860 9,20 9,60 12,700 1,90 21, 8,090,720 10,70 1,120 17,70 2,90 1,620 60,190 18,220 28,110 8,0 8,10 6, , ,70 0,80 2,10 70, 12,0 182,60 2,,00,70 76,060 1,910 19,70,870 7,60 9,20 81,10 11, ,890 7,10 0,620,20 86,210 10, ,070 1,60 6,90 70,860 96,0 169,0 2,10 6,10 62,810 78, ,90 18,10 267,70 2,960,600,690 7,880 1,0 2,700 2,80,,80 8,070 1,920 26,10 2,600,760,980 8,260 1,0,160 2,,860,090 8,20 1,90,710 2,770,90,210 8,670 16,020 28,0,080,00 9,000 16,760 29,0,000,290,70 9,0 17,0 0, ,00 11,120 16,010 20,860,00 6,0 11,20 11,80 16,20 21,80,900 66,70 117,80 11,70 16,70 22,10 6,70 68, ,810 11,80 17,170 22,60 7,900 69,0,260 12,20 17,70 2,180 8,70 71, ,60 12,720 18,10 2,020 0,00 7,0 11,00 1,0 19,080 2,780 77,090 16,200,170,10 2,960 2,960 2,90 2,910 2,760 2,670 2,760 2,70 2,710 2,670 2,80 2,80 2,60 2,0 2,20 2,0 2,20 2,10 2,0 2,0 2,290 2,160 2,10 2,10 2,110 2,00 2,000 1,90 1,90 1,90 1,860 1,820 8, ,20 1,620 2,720,010 8, ,260 1,670 2,780,10 9, ,00 1,720 2,80,290 9, ,0 2,90,80 9, ,60 1,800 2,,20 9,800 1,10 1,860,100,780 10,190 1,00 1,80 1,92,20,980 10,60 8,00,80,20 7,210 12,100 22,290,10,960,600 7,0 12,70 2 0,20,780 7, 12,680 2,0 1,680,090, ,90 2,0,0 6,00 8,010 1,00 2,0,90,00 6,0 8,0 1,790 2,710,0,80 6,80 8,60 1,10 26,600 6, in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. lbs. kg lbf N lbf N lbf N lbf N lbf - in Nm lbf - in Nm 2100 Steel with Thin ense Chrome Coating Large iameter Light eight Small Cross Section Circular Pocket Separator

38 7 N-SERIES 7 NAA NA " N /16" NC " N " NF /" NG 1" Series: Cross Section Size: " L L s i L o to clear f max ( places) 1 ANGULAR CONTACT, A-TYPE THIN SECTION ALL EARINGS *NUMER* eight LOA RATINGS iameter Outside iameter NOMINAL IMENSIONS Land iameter Li -Inner Ring Lo -Outer Ring Ls -Counter ore ore NA110ARO*RC N110ARO*RC NC110ARO*RC N110ARO*RC NF110ARO*RC NG110ARO*RC NA120ARO*RC N120ARO*RC NC120ARO*RC N120ARO*RC NF120ARO*RC NG120ARO*RC N10ARO*RC NC10ARO*RC N10ARO*RC NF10ARO*RC NG10ARO*RC N160ARO*RC NC160ARO*RC N160ARO*RC NF160ARO*RC NG160ARO*RC N180ARO*RC NC180ARO*RC N180ARO*RC NF180ARO*RC NG180ARO*RC N200ARO*RC NC200ARO*RC N200ARO*RC NF200ARO*RC NG200ARO*RC NC20ARO*RC N20ARO*RC NF20ARO*RC NG20ARO*RC NC00ARO*RC N00ARO*RC NF00ARO*RC NG00ARO*RC NF0ARO*RC NG0ARO*RC NF00ARO*RC NG00ARO*RC idth,90,0 6,720 9,080 1,880 22,70,290,80 7,290 9,870 17,100 2,60 6,760 8,90 11,0 19,790 28,0 7,710 9,680 1,00 22,80 8, 10,880 1,610 2,10 6,020 9,610 12,00 16,190 28,100,810 20,10,700 9,280 17,960 8,760 8,80 68,20,220 77,720 17,0 2,800 29,890 0,0 70,60 101,200 19,080 2,980 2,0,900 76, ,600 0,070 7,770 0,90 88,00 126,60,00,060 7, ,000 1,20 8,20 8,00 6, 11,00 160,220 2,70,0 72,020 12, ,080 66,280 89,90 1,0 219,210 79, ,160 18, ,80 21,200 0,0 2,0,720 11,80 1,0 19,0 26,220,80 6, 12,0 16,860 21,00 28,00 9,80 71,10 19,00 2,00,060 7,10 82,080 22,20,90 7,620 6,890 9,020 2, 1,10 2,180 7,60 10,70,720 6,70 81,120 1,280 8,10 100,200 12,00,80 69,0 119, ,600 1, ,000 19,00 22,00 0,620 68,680 86,20 116,0 20,90 292,070,110 7,000 9,90 126, , 16,0 86,70 108,980 17,060 2,170 6,110 98, 12,0 167,0 288, 111,160 1, ,0 26,20 62,620,0 1,0 207,910 60,80 192,20 28,620,710 2,980 20,60 09,0,0 7,20 621,20 876,00 709,00 998,180,100,0,780 9,600 17,870 1,,0,980 9,90 18,0 2,70,80 6,0 10,0 19,90,10,10 6,70 11,00 20,10,80,0 7,280 11,0 21,210 7,20,900 11,920 22,680 8,80 9,010 1,0 26,100 1,20 10,160 1,260 29,0 6,020 2,80 0,80,80,0 1,790 19,0 2,710 2,700 79,90 10,80 1,20 20,060 26,600,260 81,80 1,880 21,0 28,160, 86,700 1,910 22,910 29,90 9,060 90,0 19,70 2,0 2,80 0,670 9,0 16,610 26,20,610, , ,720 0,080 60,20 116,100 18,20,190 67,880 10,910 20,710 1, ,10 18,0 26,610 1,760 1,70 1,700 1,670 1,0 1,620 1,620 1,70 1,00 1,0 1,80 1,60 1,0 1,20 1,220 1,210 1,190 1,180 1,090 1,090 1,080 1,070 1, ,072 2,07,10 6,2 10,920 1,128 1,62 2,17,0 6,87 11,20 1,767 2,7,82 7,0 1 1,907 2,,86 7, 12,60 2,08 2,707,11 8,10 12,898 2,162 2,8,6 8,62 1,612,2,908 9,8 1,2,61,7 10, 16,687 11,82 17,982 12,17 19,1,770 6,80 9,110 1,720,700 8,70,020 7,220 9,0 1,260 28,860 9,90 7,860 10,0 1,90 1,0 2,60 8,80 11,0 17,10,60,980 9,070 12,00 18,00 6,00 7,70 9,620 12,70 19,80 8,090 60,0 1,80 21,80 2,60 67,790 1,80 2,010 6,80 7,20 0,0 79,,00 8,200 in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. lbs. kg lbf N lbf N lbf N lbf N lbf - in Nm lbf - in Nm 2100 Steel with Thin ense Chrome Coating Large iameter Light eight Small Cross Section Circular Pocket Separator

39 77 N-SERIES 76 NAA NA " N /16" NC " N " NF /" NG 1" Series: Cross Section Size: " -POINT CONTACT, X-TYPE THIN SECTION ALL EARINGS L L o i 1 to clear f max ( places) *NUMER* eight LOA RATINGS iameter Outside iameter NOMINAL IMENSIONS Land iameter Li -Inner Ring Lo -Outer Ring ore NAA10XLO*RC NAA1XLO*RC NAA17XLO*RC NA020XPO*RC N020XPO*RC NA02XPO*RC N02XPO*RC NA00XPO*RC N00XPO*RC NA0XPO*RC N0XPO*RC NA00XPO*RC N00XPO*RC NC00XPO*RC N00XPO*RC NF00XPO*RC NG00XPO*RC NA02XPO*RC N02XPO*RC NC02XPO*RC N02XPO*RC NF02XPO*RC NG02XPO*RC NA0XPO*RC N0XPO*RC NC0XPO*RC N0XPO*RC NF0XPO*RC NG0XPO*RC NA07XPO*RC N07XPO*RC NC07XPO*RC N07XPO*RC NF07XPO*RC NG07XPO*RC NA00XPO*RC N00XPO*RC NC00XPO*RC N00XPO*RC NF00XPO*RC NG00XPO*RC NA0XPO*RC N0XPO*RC NC0XPO*RC N0XPO*RC NF0XPO*RC idth ,10 1,0 1,10 1,290 2,100,60 8,210 1,70 1,80,190,60 8,210 1,0 1,90 2,0,20,90 8,760 1,20 2,00 2,60,0 6,210 9,00 1,90 2,10 2,90,760 6,90 9,80 2,60 2,80,100 7,00 1,290 2,02,020,10,690,070,00,960,070 6,80,70 9,0 1,700 2,80 6,20 6,090 8,10 9,880 1,190 6,20 6,10 8,670 10,10 1,210 26,80 8, 6,760 9,00 10,90 1,700,620 1,70 7,070 9,60 11,20 16,70 28,870 10,00 12,90 18,20 1, ,000 1, 1,710 2,0 2,80 2,70,0 2,80,860,220,70,260 7,700 1,00 20,20,10,70,60 7,980 1,110 20,20,600,880,860 8,0 1,810 21,890,790,080 6,160 8,80 1,20 2,260,980,80 6,60 9,10 16,220 2,620,60,890 7,060 10,260 17,0,20,0 6,0 7,610 10,10 9,00 12,0 10, 12,680 17,170 1,20 19,0 2,00,20 9,610 91,280 1,170 20,0 2,70,00 62,760 91,280 16,010 21,710 26,070 8,00 6,880 97,70 16,860 22,600,00,20 69,00 10,70 17,700 2,90 28,70 1,860 72,10 109,20 19,0 26,200 1,00,60 78, ,000 1,20 1,70 1,20 1,880 1,10 1, 1,80 2,100 1,0 2,210 2,810,890 8,80 1,10 1,90 2,20 2,870,920 8, 1,10 1,610 2,00 2,920,080 9,180 1,820 1, 2,10 2,,10 9,80 16,70 1,680 2,80,00,0 9,20 17,110 1,720 2,60,120,0 9,820,020,0,8,70 7,70,870 8,60 6,0 8,80 6,80 9,0 6,890 9,80 1 2,280 67,0 7,070 9,920 12,770 21,890, 67,0 7,160 10,20 12, 22,600 0,80 70,70 7,0 10,280 1,210 22,820 1,720 7,260 7,70 10,90 1,20 2,0 2,0 76,110 7, 10,90 1,880 2,20, ,080 1,10 2,10 2,90 2,70,770,600 6,90 12,70 20,20,170,10 7,80 1,110 21,0,20,690,710 8,0 1,0 2,080,790,10 6,20 9,280 17,070 26,70,180,720 6,90 10,0 18, 29,0,020 6,80 8,00 12,10 22, ,0 2, ,90 2, ,760 2, ,00 1,90, ,170 2,110, ,0 2,90 10,110 7,110 6,190,0,190,60,0,690,620,10 2,820 2,780 2,70 2,670 2,0 2,00 2,670 2,0 2,90 2,0 2,00 2,290 2,0 2,90 2,60 2,00 2,290 2,180 2,00 2,70 2,0 2,290 2,180 2,290 2,260 2,20 2,180 2,000 2,060 2,00 2,000 1, , ,091 1,17 2,11,66 7, ,120 1,6 2,,79 7, ,16 1,0 2,,92 8,20 8 1,19 1,6 2,96,08 8, ,26 2,92,172 8, ,0 1,687 2,72,1 1,200 1,80 1,82 2,290,70 2,90,770,10,120,0,60,80 6,00 10,280 20,70,90,980 6,0 10,80 21,0,220,600,180 6,720 10, ,00,710,10 6, ,0 7,70,820,00 7,120 11,0 2,010 8,980,00,800 7,00 12, , ,20 1,110 1,20 2,60,00 8,0 1,10 1,0 2,00 2,,670 8,99 1,910 1,0 2,80,080 9,69 17,00 1, 2,0,00,80 10,16 18,90 1,760 2,20,0,800 11,17 20,0 1,,717 6,0 12, , ,020 1, , ,180 2, ,260 2, ,0 in. mm in. mm in. mm in. mm in. mm in. mm in. lbs. kg lbf N lbf N lbf N lbf N lbf - in Nm lbf - in Nm 2100 Steel with Thin ense Chrome Coating Large iameter Light eight Small Cross Section Snap-Over Separator

40 79 N-SERIES 78 NAA NA " N /16" NC " N " NF /" NG 1" Series: Cross Section Size: " -POINT CONTACT, X-TYPE THIN SECTION ALL EARINGS L L o i 1 to clear f max ( places) *NUMER* eight LOA RATINGS iameter Outside iameter NOMINAL IMENSIONS Land iameter Li -Inner Ring Lo -Outer Ring ore NG0XPO*RC NA060XPO*RC N060XPO*RC NC060XPO*RC N060XPO*RC NF060XPO*RC NG060XPO*RC NA06XPO*RC N06XPO*RC NC06XPO*RC N06XPO*RC NF06XPO*RC NG06XPO*RC NA070XPO*RC N070XPO*RC NC070XPO*RC N070XPO*RC NF070XPO*RC NG070XPO*RC NA07XPO*RC N07XPO*RC NC07XPO*RC N07XPO*RC NF07XPO*RC NG07XPO*RC NA080XPO*RC N080XPO*RC NC080XPO*RC N080XPO*RC NF080XPO*RC NG080XPO*RC NA090XPO*RC N090XPO*RC NC090XPO*RC N090XPO*RC NF090XPO*RC NG090XPO*RC NA100XPO*RC N100XPO*RC NC100XPO*RC N100XPO*RC NF100XPO*RC NG100XPO*RC idth 10,00 2,60,0 7,620 11,90 2,00 2,760,10,790 8,180 12,00 2,200 2,,0,10 8,70 1,10 2,0,170,790,70 9,10 1,680,70,00,810 9,880 2,810,780,0 6,00 11,000 16,20,110,190, 7,180 12,10 18,060 6,260 8,0 11,0 1, 19,790,900,110 9,120 12,280 1,720 21,10 6,0,60 9,790 1,210 1,790 22,820 8,920 8,10 10,0 16,860 2,0 1,10 60,80 11,120 1, 17,90 2,80,90 6, ,810 20,060 28,910 8,90 7,00 1,80 18,60 22,200 1,90,960 80,0 2,,70 6,00 7, 11,120 19,00 28,70,120 6,910 8,0 11, 20,60 0,100,00 7,20 8,870 12,80 21,870 2,80,880 7,920 9,70 1,680 2,280,200 6,260 8,0 10,070 1,0 2,690 6,90 7,020 9,0 11,0 16,20,0 1,00 10,60 12,70 17,960 0,0,10 11,610 21,080 28,70 9,60 8,70 1,800 22,770 0,70 6,790,20 91,010 1,890 2,70,010,60 7,070 97,280 16,00 26,160,20 2,120 60,80 10,0 12,10,80 7,00,790 6, ,80 16,20 1,20 2,00 0,10 72, ,70 182,60,610 6,0,70 79,890 1, ,790 17,60 2,0,220,610 10,10 18,290 1,80 2,90,00,70 10,80 18,20 1,80 2,,20,880 10,60 19,0 1,890 2,70 6,060 10,90 19,60 1, 2,790,60 6,170 11,190 20,20 2,00 2,890,690 6,10 11,0 21,020 2,180,90 6,680 12,100 21,790 77,670 7,920 11,00 1,20 2,90,10 81,60 8,180 11,20 1,680 2,0 6,170 82,80 8,20 11,80 1,210 26,160 7,0 8,980 8,10 12,10 1,80 26,960 8,620 86,60 8,760 12,10 1,80,0 9,780 89, 9, ,10 28,0,70 9,00 9,700 1,700 17,80 29,710,820 96,90,790,90 8,080 9,770 1,0 2,710 0,220 6,910 9,10 11,70 16,760 29,,10 7,980 10, ,20,890 2,0 9,120 12,80 1,910 21,890 8,10 8,10 10,0 1,020 16,870 2,710 66,80 12, 17,600 21,10 0,870,60 82,080 1,90 21,80 2,880 7,710 6,210 99,20, ,0 2,900, ,060 1,280 1,890,0, ,20 1,80 2,170,80,90 1,00 1,00 1,680 2,70,0 6,70 1,170 1,80 1,910 2,790,880 7,0 1,70 1, 2,0,90 6,060 9,0 1,800 2,0 2,920,260 7,70 11,220 1,80 1,920 1,880 1,80 1,710 1,760 1,710 1, 1, 1,60 1,0 1,0 1,00 1,0 1,20 1,00 1,0 1,10 1,0 1,0 1,0 1,10 1,70 1,0 1,00 1,290 1,280 1,260 1,20 1,200 1,170 1,160 1,160 1,10 1,120 1,090 8, ,71 2,8,6 9,0 1,001 1, 1,8 2,980,880 9,71 1,06 1,98 1,91,10 6,10 10,208 1,089 1,9 2,007,222 6,2 10,10 1,11 1,618 2,082,8 6, 10,882 1,212 1,72 2,226,61 6,97 11,26 1,289 1,81 2,6,776 7,2 12,17,90,20 6,100 7,870 12,700 2,10 2,0,0 6,80 8,20 1,260 26,160,210, 6, 8,90 1,800,10,10,80 6,90 8,90 1,0 28,10 6,10,00 7,200 9,260 1,80 29,070 8,10,0 7,700 9,900 1,80 0,900,0,70 8,190 10,20 16,800 2,,00 22,700 2,20,27,2 7,290 1,11 2,610 2,,668,77 8,00 1,99,770 2,8,109,1 8,810 17,7 0,90,16,68,90 9,700 19,68,196,99,0 6,2 10,6 21, 6,7,20 6,00 7,80 12,69 2,10,20,96 7,121 9,201 1,872 29,608 0,12 2, ,620 2, ,810, ,000 2,000, ,210, ,200 2,20, ,0 2,870, ,00 1,680,0, in. mm in. mm in. mm in. mm in. mm in. mm in. lbs. kg lbf N lbf N lbf N lbf N lbf - in Nm lbf - in Nm 2100 Steel with Thin ense Chrome Coating Large iameter Light eight Small Cross Section Snap-Over Separator

41 81 N-SERIES Steel with Thin ense Chrome Coating Large iameter Light eight Small Cross Section Snap-Over Separator NAA NA " N /16" NC " N " NF /" NG 1" Series: Cross Section Size: " -POINT CONTACT, X-TYPE THIN SECTION ALL EARINGS L L o i 1 to clear f max ( places) *NUMER* eight LOA RATINGS iameter Outside iameter NOMINAL IMENSIONS Land iameter Li -Inner Ring Lo -Outer Ring ore NA110XPO*RC N110XPO*RC NC110XPO*RC N110XPO*RC NF110XPO*RC NG110XPO*RC NA120XPO*RC N120XPO*RC NC120XPO*RC N120XPO*RC NF120XPO*RC NG120XPO*RC N10XPO*RC NC10XPO*RC N10XPO*RC NF10XPO*RC NG10XPO*RC N160XPO*RC NC160XPO*RC N160XPO*RC NF160XPO*RC NG160XPO*RC N180XPO*RC NC180XPO*RC N180XPO*RC NF180XPO*RC NG180XPO*RC N200XPO*RC NC200XPO*RC N200XPO*RC NF200XPO*RC NG200XPO*RC NC20XPO*RC N20XPO*RC NF20XPO*RC NG20XPO*RC NC00XPO*RC N00XPO*RC NF00XPO*RC NG00XPO*RC NF0XPO*RC NG0XPO*RC NF00XPO*RC NG00XPO*RC idth,10,90,70 7,870 1,260 19,700,720,000,90 8,0 1,0 21,0,810 6,910 9,920 16, 2,620 6,620 7,880 11,290 18,900,910 7,0 8,80 12, 21,160 1,190 8,20 9,800 1,020 2,20,70 12,200 17,0 29,060 2,680 1,610 20,860,700 0,890 0,0 9,100, 67,10 1,170 20,20 2,0,010 8,980 87,0 16,0 22,20 26,70 8,00 6,010 9,90 2,80 0,70,10 7, ,20 29,0,00 0,220 8,070 12,10,090,20 6,0 9,120 18,70 6,700,90 62,60 10,180 1,0,0 77,80 129,0 189,80 6, 92,790 1,0 226,70 179,90 262,890 20,70 299,10 8,0 11,80 1,680 19,670,10 9,20 9,00 1 1,880 21,80,,0 1,0 17,280 2,800 1,620 61,60 16,60 19,690 28,220 7,260 69,770 18,90 2 1,60 2,900 77,980 20,620 2,00,060 8,0 86,180 0,0,610 72, 106,700 6,20 2,160 86,760 1, ,900 17,700 11, ,00 7,,070 60,80 87,00 17,60 219,070 1,70,600 66,190 9, ,000 27,10 6,0 76, ,20 18,10,80 7, 87,90 12,0 210,220 10,0 82,690 98,260 10,70 2,10 6,870 91, ,980 1,90 260,0 8,0 1,720 19, 2,160 7,0 162,0 22,020 8,90 6,810 8,80 67,000 1,0 78,60 2,20,280,180 6,80 12,90 22,0 2,0,70,20 7,080 1,190 2,180,80,890 7,670 1,0 2,00,190,0 8,60 1,820 2,0,20,760 9,00 17,060,10,80 6,170 9,670 18,20 29,00 7,10 11,180 21,070,780 8,00 12,600 2,720 7,980 26,220 1, 28,620,770 10,20 1,90 18,90 0,80,60 100,220 10,900 1,0 19, 1,90 8,670 10,110 17,080 2,120 6,0 108,090 18,60 2,710 7,190 70,70 11,70 20,110 2,620 0,170 7, ,90 21,70,0,010 81,180 10,0 1,760 9,70 9,720 10,260,810 6,00 10,0 168,90 116,0 186,690 1,10 20,600 19,210 2, 1,110,20 77, ,200 22,770 0,770 6,80,0 91,70 18,700 1,80 9,690 71, ,800 18,700,020 6,80 9,110 18,00 27,200 68,090 81, , ,00 296,00 8,780 99,80 1,700 2,000 62,000 1, ,00 7,200, ,100, , ,200 1,06 97,100 1,80,000 2,170 2,90,0,110 8,800 1,0 2,70,160 6,00 10,60 1,670,700,610 8,120 1,870 20,870 6,100 7,290 10,20 17,890 26,800 7,690 9,170 1,220 22,20,80 9,70 11,280 16,20,60 0,900 17,90 2,10 2,280 62,700 2,070,90 60,290 89,120 81,80 120,220 10,880 1,920 1,070 1,060 1,00 1,00 1,020 1, ,62 1,9 2,96,981 7,721 12,7 1, 2,0 2,622,178 8,08 1,1 2,2 2,862, 8,77 1,0 2,10,086,899 9,21 1,2 2,76,29,226 10,028 16,86 2,71,92, 10,602 17,29,91 6,2 11,909 19,60,8 6,86 1,06 21,200 22,8 1,0 2,2 6,060 8, 1 17,710,0 6,670 6,70 9,100 11, 18,80,960 9,20 9,90 12,70 20,20,00 6,070 10,720 1,70 21,790 1,910 68,610 11,60 1, 2,20,610 72,890 12,10 1,0 2,620 7,160 76,920 17,0,70 2, 86,120 19,00 0,00 8,120 9,00 62, ,620 66, ,20,70 8,2 10,6 17,17,02 7,7 6,87 9,6 12,17 19,90 8,666 6,9 11,99 1, 2,7 8,6 81,06 1,70 18,9 0,2 9,200 98,7 17,69 22,712 6,268 70,7 116,79 20,81 26,69 2,61 82,28 16,28 7,8 9,69 11,07 188,88 9,6 78,7 10,708 26,1 189,106 08, 229,82 7, ,200 1,90,80 6, ,070 1,80 2,210,70 7,0 1,60 1,70 2,800,90 9,160 1,670 2,10,0 6,690 11,110 2,000 2,70,100 7, 1 2,0,020,810 9,20 1,0,20 6,70 1,000 21,0,90 8,860 17,00,860 21,70,860 2, 2,290 in. mm in. mm in. mm in. mm in. mm in. mm in. lbs. kg lbf N lbf N lbf N lbf N lbf - in Nm lbf - in Nm

42 8 P-SERIES 82 L o L i to clear f max ( places) 1 17-PH Steel with Ceramic s Large iameter Light eight Small Cross Section Snap-Over Separator RAIAL CONTACT, C-TYPE THIN SECTION ALL EARINGS PAA Series: Cross Section Size: " PA " P /16" PC " P " PF /" PG 1" *NUMER* eight LOA RATINGS iameter Outside iameter NOMINAL IMENSIONS Land iameter Li -Inner Ring Lo -Outer Ring ore PAA10CL0*RC PAA1CL0*RC PAA17CL0*RC PA020CP0*RC P020CP0*RC PA02CP0*RC P02CP0*RC PA00CP0*RC P00CP0*RC PA0CP0*RC P0CP0*RC PA00CP0*RC P00CP0*RC PC00CP0*RC P00CP0*RC PF00CP0*RC PG00CP0*RC PA02CP0*RC P02CP0*RC PC02CP0*RC P02CP0*RC PF02CP0*RC PG02CP0*RC PA0CP0*RC P0CP0*RC PC0CP0*RC P0CP0*RC PF0CP0*RC PG0CP0*RC PA07CP0*RC P07CP0*RC PC07CP0*RC P07CP0*RC PF07CP0*RC PG07CP0*RC PA00CP0*RC P00CP0*RC PC00CP0*RC P00CP0*RC PF00CP0*RC PG00CP0*RC PA0CP0*RC P0CP0*RC PC0CP0*RC P0CP0*RC PF0CP0*RC idth ,10 1,0 1,10 1,290 2,100,60 8,210 1,70 1,80,190,60 8,210 1,0 1,90 2,0,20,90 8,760 1,20 2,00 2,60,0 6,210 9,00 1,90 2,10 2,90,760 6,90 9,80 2,60 2,80,100 7,00 1,290 2,02,020,10,690,070,00,960,070 6,80,70 9,0 1,700 2,80 6,20 6,090 8,10 9,880 1,190 6,20 6,10 8,670 10,10 1,210 26,80 8, 6,760 9,00 10,90 1,700,620 1,70 7,070 9,60 11,20 16,70 28,870 10,00 12,90 18,20 1, ,080 1,60 1,10 1,0 2,00 2,0 1,980 2,0,110,90 7,980 12,960 2,70,0,110 8,00 12,960 2,200 2,920,0,60 8,820 1,820 2,10,00,610,620 9,220 1,680 2,20,210,780, 9,600 1,0 2,,00,110 6,80 10,70 2,10 2,890,87,800 6,90,80 6,810 9,120 10,10 8,810 11,700 1,80 22,020,00 7, 9,00 12,190 1,0 22,70 7,70 7, 9,790 12, 1,00 2,290,20 61,70 10, ,060 2,000 1,010 6,00 10,760 1,280 16,810 26,60 2,700 69,170 11,790 1,70 18,280 28,820 6, ,020 1,0 1,60 2,20 2,0 1,880 2,680 1, 2,810 2,080 2,90,70 6,20 11,20 19,0 2,110,000,80 6,80 11,810 19,0 2,170,910 6,820 12,200 20,290,110, 6,80 12,90 21,10 2,20,190,00 7,00 12,710 21,90 2,20,280,170 7,0 1,170,910,0,916 7,00 10,20 7,870 11,170 8,60 11,920 8,80 1 9,20 1,120 16,60 29,000 0,800 86,70 9,0 1,0 17,00 29,0 2,0 86,70 9, 1,700 17,0 0,0,0 90,20 9,880 1,80 17, 0,0,60 9, 9,960 1,190 17, 1,20 6,0 97,60 10,20 1,90 18,0 2,0 8, ,60 1,20 1,680 2,0 2,720,0 7,80 12,960 1,880,00,860 8,00 1,600 2,810,60,60 9,0 1,200 2,10,700,910 10,10 16,890 2,0,10,060 6,70 11,00 18,,00,070,80 12, , ,00 1, ,10 1, ,20 2, ,70 16,80 11,80 10,20 8,890 8, 7,0 7,110 6,10 6,00,0,20,710,60,70,0,210,0,80,20,210,210,160,100,60,90,900,60,760,720,60,0,0,00, ,020 1,290 2,20,90 6, ,00 1,20 2,0,070 6, ,060 1,0 2,0,210 7, ,070 1,70 2,60,10 7, ,0 2,0,80 7, ,10 1,0 2,0,0 1,0 1,60 2,0 2,90,60 2,710,80 2,890,090,10,0,70 10,010 17,0 29,800,20,80,870 10,100 18,100 29,800,0,720 6,010 10,0 18,70 1,10,80,760 6,090 10,00 19,170 2,0,0,890 6,180 10,810 19,80,670,60,00 6,10 11,170 20, ,070 1,10 1,220 1,90 2,10 2,0,280,870 10,80 19,0 2,70,0 6,20 11,810 20,10 2,060 2,960 6,820 12,810 22,20,10,070 7,180 1,70 2,00 2,0,0,0 7,70 1,620 26,0 2,,900 8,720 16, ,20 2, ,0 2, ,0 2, ,0 2, , 2, ,860 in. mm in. mm in. mm in. mm in. mm in. mm in. lbs. kg lbf N lbf N lbf N lbf N lbf - in Nm lbf - in Nm

43 8 P-SERIES 8 PAA Series: Cross Section Size: " PA " P /16" PC " P " PF /" PG 1" RAIAL CONTACT, C-TYPE THIN SECTION ALL EARINGS L o L i to clear f max ( places) 1 17-PH Steel with Ceramic s Large iameter Light eight Small Cross Section Snap-Over Separator *NUMER* eight LOA RATINGS iameter Outside iameter NOMINAL IMENSIONS Land iameter Li -Inner Ring Lo -Outer Ring ore PG0CP0*RC PA060CP0*RC P060CP0*RC PC060CP0*RC P060CP0*RC PF060CP0*RC PG060CP0*RC PA06CP0*RC P06CP0*RC PC06CP0*RC P06CP0*RC PF06CP0*RC PG06CP0*RC PA070CP0*RC P070CP0*RC PC070CP0*RC P070CP0*RC PF070CP0*RC PG070CP0*RC PA07CP0*RC P07CP0*RC PC07CP0*RC P07CP0*RC PF07CP0*RC PG07CP0*RC PA080CP0*RC P080CP0*RC PC080CP0*RC P080CP0*RC PF080CP0*RC PG080CP0*RC PA090CP0*RC P090CP0*RC PC090CP0*RC P090CP0*RC PF090CP0*RC PG090CP0*RC PA100CP0*RC P100CP0*RC PC100CP0*RC P100CP0*RC PF100CP0*RC PG100CP0*RC idth 10,00 2,60,0 7,620 11,90 2,00 2,760,10,790 8,180 12,00 2,200 2,,0,10 8,70 1,10 2,0,170,790,70 9,10 10,60,70,00,810 9,880 2,810,780,0 6,00 11,000 16,20,110,190, 7,180 12,10 18,060 6,260 8,0 11,0 1, 19,790,900,110 9,120 12,280 1,720 21,10 6,0,60 9,790 1,210 1,790 22,820 8,920 8,10 10,0 16,860 2,0 1,10 7,0 11,120 1, 17,90 2,80,90 6, ,810 20,060 28,910 8,90 7,00 1,80 18,60 22,200 1,90,960 80,0 16,10 2,870,790,0 6, 11,10 18,10,100,080,790 7, ,910,20,80,120 8,020 12,670 20,20,0,670,0 8,0 1,0 21,0,770,960,790 9,00 1,200 22,890,210,0 6,70 10,060 1,70 2,0, 6,10 7,10 11,080 17,260,620 7,000 12,770 16,860 19,790 1,090 9,0 80,690 1,790 18,10 21,10,60 2,90 8,120 19,80 22,770,670 6,60 91,280 1,70 20,770 2,20 7,90 9,780 9,610 16,770 22,060 2,760 0,210, ,820 18,70 2,60 28,780,70 70, ,10 20,70,0 1,760 9,290 76, ,70 2,20,80,20 7,00 1,0 2,20 2,0,70,0 7,680 1,900 2,700 2,20,600,0 7,910 1,280 2,70 2,80,710,60 8,120 1,610 2, 2,60,720,770 8,290 26,960 2,70,860,020 8,620 1,0 28,200,00,170 8,900 16,060 29, ,200 10,760 1,00 19,220,60 60, ,180 10,900 1,0 19,70,160 61,80 109,870 11,210 16,010 20,20,190,20 11,0 11,80 16,00 20,60 6,120 6, 11,610 11,70 16,0 21,220 6,880 66, ,920 12,10 17,170 22,0 8,0 69,170 12,0 12,720 18,020 2,000,90 71,0 129,90 21,0,90,790,670 9,090 1,00 2,0,180,60 6,80 10,00 17,20 28,60,810 6,00 7,0 12,00 19,60 2,80,90 7,00 8,90 1, 22,170 6,160 6,220 8,20 9,700 1,70 2,80 1,200 7,800 10,20 12,120 19,120 0,690 0,0 9,60 12,0 1,810 2,0 7,110 60,760 2, ,00 1,700 2, ,190 1, ,60, , ,70 2,810, 880 1,170 1,70 2,160,70,710 1,080 1,0 1,670 2,0,190 6,860,170,10 2,960 2,960 2,90 2,910 2,760 2,670 2,760 2,70 2,710 2,670 2,80 2,80 2,60 2,0 2,20 2,0 2,20 2,10 2,0 2,0 2,290 2,160 2,10 2,10 2,110 2,00 2,000 1,90 1,90 1,90 1,860 1,820 7, ,170 1,90 2,80, 8,0 80 1,200 1,0 2,,790 8, ,20 1,70 2,70,920 8, ,280 2,800,00 8, ,280 1,,10 9, ,0 1,70 2,,60 9,720 1,00 1,781,0 10,00,920,690,200 6,0 11,80 20,70 7,20,780,0 6,810 11,790 21,10 7,900,870,20 6,980 12,10 21,890,00,960,690 7,120 12,60 22,20,860,00,690 7,0 12, ,70,180,920 7,700 1,210 2,80,20,00 6,20 7,920 1, 2,690, 29,80,020,0,0 9,70 18,260,00,10,70 6,110 10,760 20,160 7,00,,260 6,710 11,870 22,10 1,210,800 7,00 12, 2,100,190,0 6,190 7, 1,090 26,070 8,20,00 7,190 9,10 16,0 0,20 6,0,860 8,0 10,70 18,680,0 6,00, ,060, ,220 2,280, ,0, ,70 2,720, ,90 2,90, ,060 1,80,0 6, ,210 2,110,900 7,20 in. mm in. mm in. mm in. mm in. mm in. mm in. lbs. kg lbf N lbf N lbf N lbf N lbf - in Nm lbf - in Nm

44 87 P-SERIES 86 PAA Series: Cross Section Size: " PA " P /16" PC " P " PF /" PG 1" RAIAL CONTACT, C-TYPE THIN SECTION ALL EARINGS L o L i to clear f max ( places) 1 17-PH Steel with Ceramic s Large iameter Light eight Small Cross Section Snap-Over Separator *NUMER* eight LOA RATINGS iameter Outside iameter NOMINAL IMENSIONS Land iameter Li -Inner Ring Lo -Outer Ring ore PA110CP0*RC P110CP0*RC PC110CP0*RC P110CP0*RC PF110CP0*RC PG110CP0*RC PA120CP0*RC P120CP0*RC PC120CP0*RC P120CP0*RC PF120CP0*RC PG120CP0*RC P10CP0*RC PC10CP0*RC P10CP0*RC PF10CP0*RC PG10CP0*RC P160CP0*RC PC160CP0*RC P160CP0*RC PF160CP0*RC PG160CP0*RC P180CP0*RC PC180CP0*RC P180CP0*RC PF180CP0*RC PG180CP0*RC P200CP0*RC PC200CP0*RC P200CP0*RC PF200CP0*RC PG200CP0*RC PC20CP0*RC P20CP0*RC PF20CP0*RC PG20CP0*RC PC00CP0*RC P00CP0*RC PF00CP0*RC PG00CP0*RC PF0CP0*RC PG0CP0*RC PF00CP0*RC PG00CP0*RC idth,10,90,70 7,870 1,260 19,700,720,000,90 8,0 1,0 21,0,810 6,910 9,920 16, 2,620 6,620 7,880 11,290 18,900,910 7,0 8,80 12, 21,160 1,190 8,20 9,800 1,020 2,20,70 12,200 17,0 29,060 2,680 1,610 20,860,700 0,890 0,0 9,100, 67,10 1,170 20,20 2,0,010 8,980 87,0 16,0 22,20 26,70 8,00 6,010 9,90 2,80 0,70,10 7, ,20 29,0,00 0,220 8,070 12,10,090,20 6,0 9,120 18,70 6,700,90 62,60 10,180 1,0,0 77,80 129,0 189,80 6, 92,790 1,0 226,70 179,90 262,890 20,70 299,10,110 6,700 7,800 12,100 18,790 29,980,60 7,290 8,80 1,10 20,0 2,0 8,0 9,820 1,180 2,10 7,080 9,620 11,160 17,20 26,80 1,810 10,780 12,0 19,260 29,60 6,0 11,90 1,80 21,20 2,620,20 17,200 26,10 0,0,110 20,60 7,960 7,90,610 86,680,00 98,90 22,70 29,800,700,820 8,80 1,60 2,70 2,0 7,720 8,0 90,80 1,900 7,90,680 67,20 10,10 16,90 2,790 9,60 76,60 117,790 18,980 7,90, 8,670 11,90 207,020,110 61,610 9,80 2,90 76,0 117,80 179,10 280,70 91,60 10,00 21,0,0 27,70 8,70 281,70 8,0 2,980,10,280 9,220 16,610 0,060,0,70 9,0 17,200 0,,20,800 10,00 18,090 2,710,800 6,00 10,00 19,000,0,00 6,0 10,870 19,980,,260 6,670 11,80 20,70 6,780 7,00 12,260 21,910 0,100 8,000 1,0 2,620 2,0 2,,120 26,0 7,080 1,260 18,70 2,90 1,010 7,880 1,710 1,700 18, 2,0 2,80 76,0 17,80 20,110 2,800,620 80,70 1,00 21,0 26,910 6,710 8,20 12,0 22,60 28,20 8,0 88,880 18,620 2,00 29,670 0,620 91,00 1,610 2,70,0 97,60 178,70,90 9,780 10, , , , , ,20 11,00 1,160 17,70,80,160 71,90 1,620 17,90 20,980 2,80,860 8,100 2,180 28,20,020 69,00 111,20 1,70 6,0 6,80 88,690 12,10,90,960 71,0 110,80 176,870 8,20 6,0 87,00 1,0 21,210 87,290 1, ,0 28,10 12, ,20 29, 6,60 7,620 62,100,90 808,20 1,00 1,710 2,010,10, 8,10 2,00 2,70,710,860 9,00 2,70,190, 7,800 12,70,0,10 6,20 10,020 16,060,60,190 8,00 12,20 19,980,80 6,80 9,870 1,00 2,20 9,860 1,220 2,0 7,080 1,110 21,70,0,90 70,0 8,290 91,0 1,760 1,70 1,700 1,670 1,0 1,620 1,620 1,70 1,00 1,0 1,80 1,60 1,0 1,20 1,220 1,210 1,190 1,180 1,090 1,090 1,080 1,070 1, ,00 1,6 1,879,180,8 10,60 1,078 1, 1,97,20 6,10 10,690 1,680 2,1,60 6,620 11,280 1,812 2,21,688 7,10 11,820 1,96 2,78,9 7,7 12,67 2,0 2,626,16 7,986 1,0 2,962,689 8,9 1,91,260,1 9,828 1,9 10,60 17,19 11,02 18,07,80 6,0 8,60 1,10 2,90 6,080,800 6,80 8,780,160 7,0 7,70 9,80 1,0 29,0 0,180 8,060 10,20 16,10 2,80 8,610 11,020 17,90,620,010 9,10 11,680 18,20,20 8,020 1,180 20,860,870 6,900 1,00 22,920,720 71,010 7,160 76,90 0,0 81,0 6,700 9,0 12,020 21,210,00 72,10 7,0 10,0 1,0 2,070,80 80,80 12,90 16,680 29,100,80 98,10 1,670 19,80,,0 116,0 18,90 2 0,200 7,910 1,0 21,70,170 6,680 8,80 1,90 7,070 62,0 112,80 208,0 8,610 82,010 1,0 2,80 178,0 17, 216,20 86, ,060 1,60 2,00,10 8, ,190 1,0 2,720,90 9,100 1,60 1,880,290 6,00 11,090 2,20,920 7,190 1,170 2,,0 8,60 1,10 2,10,0 9, 17,60,190 7,060 12,70 2,60,90 9,0 16,10 29,780 20,170,890 2,0,620 in. mm in. mm in. mm in. mm in. mm in. mm in. lbs. kg lbf N lbf N lbf N lbf N lbf - in Nm lbf - in Nm

45 89 P-SERIES 88 L L s i L o to clear f max ( places) 1 PAA PA " P /16" PC " P " PF /" PG 1" Series: Cross Section Size: " 17-PH Steel with Ceramic s Large iameter Light eight Small Cross Section Circular Pocket Separator ANGULAR CONTACT, A-TYPE THIN SECTION ALL EARINGS *NUMER* eight LOA RATINGS iameter Outside iameter NOMINAL IMENSIONS Land iameter Li -Inner Ring Lo -Outer Ring Ls -Counter ore ore PAA10AG0*RC PAA1AG0*RC PAA17AG0*RC PA020AR0*RC P020AR0*RC PA02AR0*RC P02AR0*RC PA00AR0*RC P00AR0*RC PA0AR0*RC P0AR0*RC PA00AR0*RC P00AR0*RC PC00AR0*RC P00AR0*RC PF00AR0*RC PG00AR0*RC PA02AR0*RC P02AR0*RC PC02AR0*RC P02AR0*RC PF02AR0*RC PG02AR0*RC PA0AR0*RC P0AR0*RC PC0AR0*RC P0AR0*RC PF0AR0*RC PG0AR0*RC PA07AR0*RC P07AR0*RC PC07AR0*RC P07AR0*RC PF07AR0*RC PG07AR0*RC PA00AR0*RC P00AR0*RC PC00AR0*RC P00AR0*RC PF00AR0*RC PG00AR0*RC PA0AR0*RC P0AR0*RC PC0AR0*RC P0AR0*RC PF0AR0*RC idth , ,0 1,10 1,0 1,10 1,790 1,90 2,00 2,0,0 6,0 9,80 1,80 2,10 2,710,70 6,600 9,90 1, 16,801,90 7,090 10,0 2,0,020,10 7,0 10,900 1,80,180,0 7,70 11,70 2,020 2,70,0,70 8,10 1,0 2,10 2,82,0,80,0,960,070 6,890,80 7,960 6,0 9,070 11,0 1,790 28,20 2,170 7,00 9,60 12,00 16,680 29,60,260 7,80 7,70 12,720 17,70 6,0 10,0 1,0 18,60 2,610 8,90 8,180 11,120 1,10 19,10,670 0,80 8, 12,190 1,00 21,080 6,960 1,80 1,80 2,280,10 2,780,860,290,70,790,180,00,890 7,60 10,260 18,0,60,0 6,200 7,820 10,80 19,00 28,70,810 6,00 8,0 11,00 20,60 0,100,060 6,910 8,720 11, 21,160 1,60,10 7,210 9,170 12,0 21,870 2,80,820 7,920 9,920 1,680 2,980,10 6,10 8,10 10,10 1,010 12,70 17,170 1,0 19,880 16,860 2,00 19,10 26,200 2,70,60 81,80 121,700 20,20,80,790 8,170 8,70 1,800 21,00 28,910 6,790 0,710 91,010 1,890 22,0 0,70 8,790,20 9,120 1,90 2,620 2,070 0,790,780 97,280 16,00 2,890,20,10 60,80 106, ,1 1,70 2,60 1,860 2,680 1,980 2,800 2,070 2, 2,180,10,080 6,020 12,620 21,290 2,20,170,180 6, 12,70 21, 2,260,20,260 7, ,690 2,10,290,0 7,280 1,80 2,70 2,60,0,0 7,00 1 2,00 2,10,0 7, 1,980,0,890 6,29 7,700 10,90 8,0 11,920 8,810 12,60 9,210 1,210 9,700 1,920 18,10 26,780 6,10 9,700 9,960 18,90 1,090 6,670 97,820 10,00 1,10 18,90 1,760 8, ,90 10,280 1,0 19,10 2,80 9,20 10,90 10,00 19,790 2,920 9, ,90 10,720 1,80 20,190 62,190 16,80 11,80 10,20 8,890 8, 7,0 7,110 6,10 6,00,0,20,710,60,70,0,210,0,80,20,210,210,160,100,60,90,900,60,760,720,60,0,0,00, , ,080 1,10 2,070,0 7, ,090 1,0 2,10,0 7, ,120 1,70 2,60,0 7, ,10 1,00 2,0,610 8, ,160 2,0, 8, ,200 1,60 2,60,820 1,70 1,690 2,1 2,670,780 2,80,090,020,10,0,0,800 6,0 9,210 19,0 2,,0,80 6,10 10,720 19,0,720,70,980 6,0 10,90 20,20,790,60,070 6,670 11,170 20,0,80,600,160 6,80 11,0 20,680 6,880,690,0 6,90 11,70 21,0 in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. lbs. kg lbf N lbf N lbf N lbf N lbf - in Nm lbf - in Nm

46 91 P-SERIES PH Steel with Ceramic s Large iameter Light eight Small Cross Section Circular Pocket Separator L L s i L o to clear f max ( places) 1 ANGULAR CONTACT, A-TYPE THIN SECTION ALL EARINGS *NUMER* eight LOA RATINGS iameter Outside iameter NOMINAL IMENSIONS Land iameter Li -Inner Ring Lo -Outer Ring Ls -Counter ore ore PG0AR0*RC PA060AR0*RC P060AR0*RC PC060AR0*RC P060AR0*RC PF060AR0*RC PG060AR0*RC PA06AR0*RC P06AR0*RC PC06AR0*RC P06AR0*RC PF06AR0*RC PG06AR0*RC PA070AR0*RC P070AR0*RC PC070AR0*RC P070AR0*RC PF070AR0*RC PG070AR0*RC PA07AR0*RC P07AR0*RC PC07AR0*RC P07AR0*RC PF07AR0*RC PG07AR0*RC PA080AR0*RC P080AR0*RC PC080AR0*RC P080AR0*RC PF080AR0*RC PG080AR0*RC PA090AR0*RC P090AR0*RC PC090AR0*RC P090AR0*RC PF090AR0*RC PG090AR0*RC PA100AR0*RC P100AR0*RC PC100AR0*RC P100AR0*RC PF100AR0*RC PG100AR0*RC idth 12,20 2,190 2,,70,10 9,00 1,0 2,70,060,0 9,770 1,220 2,0,0,20,920 10,0 1,160 2,720,700,0 6,20 11,000 16,110 2,890,90,90 6,710 11,70 17,060,20,00,20 7,00 1,190 18,960,90,890 6,10 8,290 1,20 20,80,800 9,70 1,00 16,680 22,820 0,210 9,00 10,0 1,20 18,060 2,600,60,20 11,00 1,0 19,220 26,0 6,70 67,0 12,100 16,60 20,600 28,110 8,90 71, 1 17,0 22,020 29,80 2,180 7,890 1,10 19,70 2,0,60 8,670 8,0 1, 2,10 6,880 6,10 92,70,70 6,20 8,0 10,820 1,820 26,100 8,00 6,80 9,20 11,720 1,960 28,220 1,00 7,0 9,960 12,70 17,100 0,0,780 7,80 10,670 1,80 18,20 1,70 6,0 8,0 11,80 1,280 19,80,860 9,20 9,60 12,700 1,90 21, 8,090,720 10,70 1,120 17,70 2,90 1,620 60,190 18,220 28,110 8,0 8,10 6, , ,70 0,80 2,10 70, 12,0 182,60 2,,00,70 76,060 1,910 19,70,870 7,60 9,20 81,10 11, ,890 7,10 0,620,20 86,210 10, ,070 1,60 6,90 70,860 96,0 169,0 2,10 6,10 62,810 78, ,90 18,10 267,70 2,960,600,690 7,880 1,0 2,700 2,80,,80 8,070 1,920 26,10 2,600,760,980 8,260 1,0,160 2,,860,090 8,20 1,90,710 2,770,90,210 8,670 16,020 28,0,080,00 9,000 16,760 29,0,000,290,70 9,0 17,0 0, ,00 11,120 16,010 20,860,00 6,0 11,20 11,80 16,20 21,80,900 66,70 117,80 11,70 16,70 22,10 6,70 68, ,810 11,80 17,170 22,60 7,900 69,0,260 12,20 17,70 2,180 8,70 71, ,60 12,720 18,10 2,020 0,00 7,0 11,00 1,0 19,080 2,780 77,090 16,200,170,10 2,960 2,960 2,90 2,910 2,760 2,670 2,760 2,70 2,710 2,670 2,80 2,80 2,60 2,0 2,20 2,0 2,20 2,10 2,0 2,0 2,290 2,160 2,10 2,10 2,110 2,00 2,000 1,90 1,90 1,90 1,860 1,820 8, ,20 1,620 2,720,010 8, ,260 1,670 2,780,10 9, ,00 1,720 2,80,290 9, ,0 2,90,80 9, ,60 1,800 2,,20 9,800 1,10 1,860,100,780 10,190 1,00 1,80 1,92,20,980 10,60 8,00,80,20 7,210 12,100 22,290,10,960,600 7,0 12,70 2 0,20,780 7, 12,680 2,0 1,680,090, ,90 2,0,0 6,00 8,010 1,00 2,0,90,00 6,0 8,0 1,790 2,710,0,80 6,80 8,60 1,10 26,600 6, in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. lbs. kg lbf N lbf N lbf N lbf N lbf - in Nm lbf - in Nm PAA PA " P /16" PC " P " PF /" PG 1" Series: Cross Section Size: "

47 9 P-SERIES PH Steel with Ceramic s Large iameter Light eight Small Cross Section Circular Pocket Separator L L s i L o to clear f max ( places) 1 ANGULAR CONTACT, A-TYPE THIN SECTION ALL EARINGS *NUMER* eight LOA RATINGS iameter Outside iameter NOMINAL IMENSIONS Land iameter Li -Inner Ring Lo -Outer Ring Ls -Counter ore ore PA110AR0*RC P110AR0*RC PC110AR0*RC P110AR0*RC PF110AR0*RC PG110AR0*RC PA120AR0*RC P120AR0*RC PC120AR0*RC P120AR0*RC PF120AR0*RC PG120AR0*RC P10AR0*RC PC10AR0*RC P10AR0*RC PF10AR0*RC PG10AR0*RC P160AR0*RC PC160AR0*RC P160AR0*RC PF160AR0*RC PG160AR0*RC P180AR0*RC PC180AR0*RC P180AR0*RC PF180AR0*RC PG180AR0*RC P200AR0*RC PC200AR0*RC P200AR0*RC PF200AR0*RC PG200AR0*RC PC20AR0*RC P20AR0*RC PF20AR0*RC PG20AR0*RC PC00AR0*RC P00AR0*RC PF00AR0*RC PG00AR0*RC PF0AR0*RC PG0AR0*RC PF00AR0*RC PG00AR0*RC idth,90,0 6,720 9,080 1,880 22,70,290,80 7,290 9,870 17,100 2,60 6,760 8,90 11,0 19,790 28,0 7,710 9,680 1,00 22,80 8, 10,880 1,610 2,10 6,020 9,610 12,00 16,190 28,100,810 20,10,700 9,280 17,960 8,760 8,80 68,20,220 77,720 17,0 2,800 29,890 0,0 70,60 101,200 19,080 2,980 2,0,900 76, ,600 0,070 7,770 0,90 88,00 126,60,00,060 7, ,000 1,20 8,20 8,00 6, 11,00 160,220 2,70,0 72,020 12, ,080 66,280 89,90 1,0 219,210 79, ,160 18, ,80 21,200 0,0 2,0,720 11,80 1,0 19,0 26,220,80 6, 12,0 16,860 21,00 28,00 9,80 71,10 19,00 2,00,060 7,10 82,080 22,20,90 7,620 6,890 9,020 2, 1,10 2,180 7,60 10,70,720 6,70 81,120 1,280 8,10 100,200 12,00,80 69,0 119, ,600 1, ,000 19,00 22,00 0,620 68,680 86,20 116,0 20,90 292,070,110 7,000 9,90 126, , 16,0 86,70 108,980 17,060 2,170 6,110 98, 12,0 167,0 288, 111,160 1, ,0 26,20 62,620,0 1,0 207,910 60,80 192,20 28,620,710 2,980 20,60 09,0,0 7,20 621,20 876,00 709,00 998,180,100,0,780 9,600 17,870 1,,0,980 9,90 18,0 2,70,80 6,0 10,0 19,90,10,10 6,70 11,00 20,10,80,0 7,280 11,0 21,210 7,20,900 11,920 22,680 8,80 9,010 1,0 26,100 1,20 10,160 1,260 29,0 6,020 2,80 0,80,80,0 1,790 19,0 2,710 2,700 79,90 10,80 1,20 20,060 26,600,260 81,80 1,880 21,0 28,160, 86,700 1,910 22,910 29,90 9,060 90,0 19,70 2,0 2,80 0,670 9,0 16,610 26,20,610, , ,720 0,080 60,20 116,100 18,20,190 67,880 10,910 20,710 1, ,10 18,0 26,610 1,760 1,70 1,700 1,670 1,0 1,620 1,620 1,70 1,00 1,0 1,80 1,60 1,0 1,20 1,220 1,210 1,190 1,180 1,090 1,090 1,080 1,070 1, ,072 2,07,10 6,2 10,920 1,128 1,62 2,17,0 6,87 11,20 1,767 2,7,82 7,0 1 1,907 2,,86 7, 12,60 2,08 2,707,11 8,10 12,898 2,162 2,8,6 8,62 1,612,2,908 9,8 1,2,61,7 10, 16,687 11,82 17,982 12,17 19,1,770 6,80 9,110 1,720,700 8,70,020 7,220 9,0 1,260 28,860 9,90 7,860 10,0 1,90 1,0 2,60 8,80 11,0 17,10,60,980 9,070 12,00 18,00 6,00 7,70 9,620 12,70 19,80 8,090 60,0 1,80 21,80 2,60 67,790 1,80 2,010 6,80 7,20 0,0 79,,00 8,200 in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. lbs. kg lbf N lbf N lbf N lbf N lbf - in Nm lbf - in Nm PAA PA " P /16" PC " P " PF /" PG 1" Series: Cross Section Size: "

48 9 P-SERIES 9 17-PH Steel with Ceramic s Large iameter Light eight Small Cross Section Snap-Over Separator PAA PA " P /16" PC " P " PF /" PG 1" Series: Cross Section Size: " -POINT CONTACT, X-TYPE THIN SECTION ALL EARINGS L L o i 1 to clear f max ( places) *NUMER* eight LOA RATINGS iameter Outside iameter NOMINAL IMENSIONS Land iameter Li -Inner Ring Lo -Outer Ring ore PAA10XL0*RC PAA1XL0*RC PAA17XL0*RC PA020XP0*RC P020XP0*RC PA02XP0*RC P02XP0*RC PA00XP0*RC P00XP0*RC PA0XP0*RC P0XP0*RC PA00XP0*RC P00XP0*RC PC00XP0*RC P00XP0*RC PF00XP0*RC PG00XP0*RC PA02XP0*RC P02XP0*RC PC02XP0*RC P02XP0*RC PF02XP0*RC PG02XP0*RC PA0XP0*RC P0XP0*RC PC0XP0*RC P0XP0*RC PF0XP0*RC PG0XP0*RC PA07XP0*RC P07XP0*RC PC07XP0*RC P07XP0*RC PF07XP0*RC PG07XP0*RC PA00XP0*RC P00XP0*RC PC00XP0*RC P00XP0*RC PF00XP0*RC PG00XP0*RC PA0XP0*RC P0XP0*RC PC0XP0*RC P0XP0*RC PF0XP0*RC idth ,10 1,0 1,10 1,290 2,100,60 8,210 1,70 1,80,190,60 8,210 1,0 1,90 2,0,20,90 8,760 1,20 2,00 2,60,0 6,210 9,00 1,90 2,10 2,90,760 6,90 9,80 2,60 2,80,100 7,00 1,290 2,02,020,10,690,070,00,960,070 6,80,70 9,0 1,700 2,80 6,20 6,090 8,10 9,880 1,190 6,20 6,10 8,670 10,10 1,210 26,80 8, 6,760 9,00 10,90 1,700,620 1,70 7,070 9,60 11,20 16,70 28,870 10,00 12,90 18,20 1, ,000 1, 1,710 2,0 2,80 2,70,0 2,80,860,220,70,260 7,700 1,00 20,20,10,70,60 7,980 1,110 20,20,600,880,860 8,0 1,810 21,890,790,080 6,160 8,80 1,20 2,260,980,80 6,60 9,10 16,220 2,620,60,890 7,060 10,260 17,0,20,0 6,0 7,610 10,10 9,00 12,0 10, 12,680 17,170 1,20 19,0 2,00,20 9,610 91,280 1,170 20,0 2,70,00 62,760 91,280 16,010 21,710 26,070 8,00 6,880 97,70 16,860 22,600,00,20 69,00 10,70 17,700 2,90 28,70 1,860 72,10 109,20 19,0 26,200 1,00,60 78, ,000 1,20 1,70 1,20 1,880 1,10 1, 1,80 2,100 1,0 2,210 2,810,890 8,80 1,10 1,90 2,20 2,870,920 8, 1,10 1,610 2,00 2,920,080 9,180 1,820 1, 2,10 2,,10 9,80 16,70 1,680 2,80,00,0 9,20 17,110 1,720 2,60,120,0 9,820,020,0,8,70 7,70,870 8,60 6,0 8,80 6,80 9,0 6,890 9,80 1 2,280 67,0 7,070 9,920 12,770 21,890, 67,0 7,160 10,20 12, 22,600 0,80 70,70 7,0 10,280 1,210 22,820 1,720 7,260 7,70 10,90 1,20 2,0 2,0 76,110 7, 10,90 1,880 2,20, ,080 1,10 2,10 2,90 2,70,770,600 6,90 12,70 20,20,170,10 7,80 1,110 21,0,20,690,710 8,0 1,0 2,080,790,10 6,20 9,280 17,070 26,70,180,720 6,90 10,0 18, 29,0,020 6,80 8,00 12,10 22, ,0 2, ,90 2, ,760 2, ,00 1,90, ,170 2,110, ,0 2,90 10,110 7,110 6,190,0,190,60,0,690,620,10 2,820 2,780 2,70 2,670 2,0 2,00 2,670 2,0 2,90 2,0 2,00 2,290 2,0 2,90 2,60 2,00 2,290 2,180 2,00 2,70 2,0 2,290 2,180 2,290 2,260 2,20 2,180 2,000 2,060 2,00 2,000 1, , ,091 1,17 2,11,66 7, ,120 1,6 2,,79 7, ,16 1,0 2,,92 8,20 8 1,19 1,6 2,96,08 8, ,26 2,92,172 8, ,0 1,687 2,72,1 1,200 1,80 1,82 2,290,70 2,90,770,10,120,0,60,80 6,00 10,280 20,70,90,980 6,0 10,80 21,0,220,600,180 6,720 10, ,00,710,10 6, ,0 7,70,820,00 7,120 11,0 2,010 8,980,00,800 7,00 12, , ,20 1,110 1,20 2,60,00 8,0 1,10 1,0 2,00 2,,670 8,99 1,910 1,0 2,80,080 9,69 17,00 1, 2,0,00,80 10,16 18,90 1,760 2,20,0,800 11,17 20,0 1,,717 6,0 12, , ,020 1, , ,180 2, ,260 2, ,0 in. mm in. mm in. mm in. mm in. mm in. mm in. lbs. kg lbf N lbf N lbf N lbf N lbf - in Nm lbf - in Nm

49 97 P-SERIES PH Steel with Ceramic s Large iameter Light eight Small Cross Section Snap-Over Separator -POINT CONTACT, X-TYPE THIN SECTION ALL EARINGS L L o i 1 to clear f max ( places) *NUMER* eight LOA RATINGS iameter Outside iameter NOMINAL IMENSIONS Land iameter Li -Inner Ring Lo -Outer Ring ore PG0XP0*RC PA060XP0*RC P060XP0*RC PC060XP0*RC P060XP0*RC PF060XP0*RC PG060XP0*RC PA06XP0*RC P06XP0*RC PC06XP0*RC P06XP0*RC PF06XP0*RC PG06XP0*RC PA070XP0*RC P070XP0*RC PC070XP0*RC P070XP0*RC PF070XP0*RC PG070XP0*RC PA07XP0*RC P07XP0*RC PC07XP0*RC P07XP0*RC PF07XP0*RC PG07XP0*RC PA080XP0*RC P080XP0*RC PC080XP0*RC P080XP0*RC PF080XP0*RC PG080XP0*RC PA090XP0*RC P090XP0*RC PC090XP0*RC P090XP0*RC PF090XP0*RC PG090XP0*RC PA100XP0*RC P100XP0*RC PC100XP0*RC P100XP0*RC PF100XP0*RC PG100XP0*RC idth 10,00 2,60,0 7,620 11,90 2,00 2,760,10,790 8,180 12,00 2,200 2,,0,10 8,70 1,10 2,0,170,790,70 9,10 1,680,70,00,810 9,880 2,810,780,0 6,00 11,000 16,20,110,190, 7,180 12,10 18,060 6,260 8,0 11,0 1, 19,790,900,110 9,120 12,280 1,720 21,10 6,0,60 9,790 1,210 1,790 22,820 8,920 8,10 10,0 16,860 2,0 1,10 60,80 11,120 1, 17,90 2,80,90 6, ,810 20,060 28,910 8,90 7,00 1,80 18,60 22,200 1,90,960 80,0 2,,70 6,00 7, 11,120 19,00 28,70,120 6,910 8,0 11, 20,60 0,100,00 7,20 8,870 12,80 21,870 2,80,880 7,920 9,70 1,680 2,280,200 6,260 8,0 10,070 1,0 2,690 6,90 7,020 9,0 11,0 16,20,0 1,00 10,60 12,70 17,960 0,0,10 11,610 21,080 28,70 9,60 8,70 1,800 22,770 0,70 6,790,20 91,010 1,890 2,70,010,60 7,070 97,280 16,00 26,160,20 2,120 60,80 10,0 12,10,80 7,00,790 6, ,80 16,20 1,20 2,00 0,10 72, ,70 182,60,610 6,0,70 79,890 1, ,790 17,60 2,0,220,610 10,10 18,290 1,80 2,90,00,70 10,80 18,20 1,80 2,,20,880 10,60 19,0 1,890 2,70 6,060 10,90 19,60 1, 2,790,60 6,170 11,190 20,20 2,00 2,890,690 6,10 11,0 21,020 2,180,90 6,680 12,100 21,790 77,670 7,920 11,00 1,20 2,90,10 81,60 8,180 11,20 1,680 2,0 6,170 82,80 8,20 11,80 1,210 26,160 7,0 8,980 8,10 12,10 1,80 26,960 8,620 86,60 8,760 12,10 1,80,0 9,780 89, 9, ,10 28,0,70 9,00 9,700 1,700 17,80 29,710,820 96,90,790,90 8,080 9,770 1,0 2,710 0,220 6,910 9,10 11,70 16,760 29,,10 7,980 10, ,20,890 2,0 9,120 12,80 1,910 21,890 8,10 8,10 10,0 1,020 16,870 2,710 66,80 12, 17,600 21,10 0,870,60 82,080 1,90 21,80 2,880 7,710 6,210 99,20, ,0 2,900, ,060 1,280 1,890,0, ,20 1,80 2,170,80,90 1,00 1,00 1,680 2,70,0 6,70 1,170 1,80 1,910 2,790,880 7,0 1,70 1, 2,0,90 6,060 9,0 1,800 2,0 2,920,260 7,70 11,220 1,80 1,920 1,880 1,80 1,710 1,760 1,710 1, 1, 1,60 1,0 1,0 1,00 1,0 1,20 1,00 1,0 1,10 1,0 1,0 1,0 1,10 1,70 1,0 1,00 1,290 1,280 1,260 1,20 1,200 1,170 1,160 1,160 1,10 1,120 1,090 8, ,71 2,8,6 9,0 1,001 1, 1,8 2,980,880 9,71 1,06 1,98 1,91,10 6,10 10,208 1,089 1,9 2,007,222 6,2 10,10 1,11 1,618 2,082,8 6, 10,882 1,212 1,72 2,226,61 6,97 11,26 1,289 1,81 2,6,776 7,2 12,17,90,20 6,100 7,870 12,700 2,10 2,0,0 6,80 8,20 1,260 26,160,210, 6, 8,90 1,800,10,10,80 6,90 8,90 1,0 28,10 6,10,00 7,200 9,260 1,80 29,070 8,10,0 7,700 9,900 1,80 0,900,0,70 8,190 10,20 16,800 2,,00 22,700 2,20,27,2 7,290 1,11 2,610 2,,668,77 8,00 1,99,770 2,8,109,1 8,810 17,7 0,90,16,68,90 9,700 19,68,196,99,0 6,2 10,6 21, 6,7,20 6,00 7,80 12,69 2,10,20,96 7,121 9,201 1,872 29,608 0,12 2, ,620 2, ,810, ,000 2,000, ,210, ,200 2,20, ,0 2,870, ,00 1,680,0, in. mm in. mm in. mm in. mm in. mm in. mm in. lbs. kg lbf N lbf N lbf N lbf N lbf - in Nm lbf - in Nm PAA PA " P /16" PC " P " PF /" PG 1" Series: Cross Section Size: "

50 99 P-SERIES PH Steel with Ceramic s Large iameter Light eight Small Cross Section Snap-Over Separator -POINT CONTACT, X-TYPE THIN SECTION ALL EARINGS L L o i 1 to clear f max ( places) *NUMER* eight LOA RATINGS iameter Outside iameter NOMINAL IMENSIONS Land iameter Li -Inner Ring Lo -Outer Ring ore PA110XP0*RC P110XP0*RC PC110XP0*RC P110XP0*RC PF110XP0*RC PG110XP0*RC PA120XP0*RC P120XP0*RC PC120XP0*RC P120XP0*RC PF120XP0*RC PG120XP0*RC P10XP0*RC PC10XP0*RC P10XP0*RC PF10XP0*RC PG10XP0*RC P160XP0*RC PC160XP0*RC P160XP0*RC PF160XP0*RC PG160XP0*RC P180XP0*RC PC180XP0*RC P180XP0*RC PF180XP0*RC PG180XP0*RC P200XP0*RC PC200XP0*RC P200XP0*RC PF200XP0*RC PG200XP0*RC PC20XP0*RC P20XP0*RC PF20XP0*RC PG20XP0*RC PC00XP0*RC P00XP0*RC PF00XP0*RC PG00XP0*RC PF0XP0*RC PG0XP0*RC PF00XP0*RC PG00XP0*RC idth,10,90,70 7,870 1,260 19,700,720,000,90 8,0 1,0 21,0,810 6,910 9,920 16, 2,620 6,620 7,880 11,290 18,900,910 7,0 8,80 12, 21,160 1,190 8,20 9,800 1,020 2,20,70 12,200 17,0 29,060 2,680 1,610 20,860,700 0,890 0,0 9,100, 67,10 1,170 20,20 2,0,010 8,980 87,0 16,0 22,20 26,70 8,00 6,010 9,90 2,80 0,70,10 7, ,20 29,0,00 0,220 8,070 12,10,090,20 6,0 9,120 18,70 6,700,90 62,60 10,180 1,0,0 77,80 129,0 189,80 6, 92,790 1,0 226,70 179,90 262,890 20,70 299,10 8,0 11,80 1,680 19,670,10 9,20 9,00 1 1,880 21,80,,0 1,0 17,280 2,800 1,620 61,60 16,60 19,690 28,220 7,260 69,770 18,90 2 1,60 2,900 77,980 20,620 2,00,060 8,0 86,180 0,0,610 72, 106,700 6,20 2,160 86,760 1, ,900 17,700 11, ,00 7,,070 60,80 87,00 17,60 219,070 1,70,600 66,190 9, ,000 27,10 6,0 76, ,20 18,10,80 7, 87,90 12,0 210,220 10,0 82,690 98,260 10,70 2,10 6,870 91, ,980 1,90 260,0 8,0 1,720 19, 2,160 7,0 162,0 22,020 8,90 6,810 8,80 67,000 1,0 78,60 2,20,280,180 6,80 12,90 22,0 2,0,70,20 7,080 1,190 2,180,80,890 7,670 1,0 2,00,190,0 8,60 1,820 2,0,20,760 9,00 17,060,10,80 6,170 9,670 18,20 29,00 7,10 11,180 21,070,780 8,00 12,600 2,720 7,980 26,220 1, 28,620,770 10,20 1,90 18,90 0,80,60 100,220 10,900 1,0 19, 1,90 8,670 10,110 17,080 2,120 6,0 108,090 18,60 2,710 7,190 70,70 11,70 20,110 2,620 0,170 7, ,90 21,70,0,010 81,180 10,0 1,760 9,70 9,720 10,260,810 6,00 10,0 168,90 116,0 186,690 1,10 20,600 19,210 2, 1,110,20 77, ,200 22,770 0,770 6,80,0 91,70 18,700 1,80 9,690 71, ,800 18,700,020 6,80 9,110 18,00 27,200 68,090 81, , ,00 296,00 8,780 99,80 1,700 2,000 62,000 1, ,00 7,200, ,100, , ,200 1,06 97,100 1,80,000 2,170 2,90,0,110 8,800 1,0 2,70,160 6,00 10,60 1,670,700,610 8,120 1,870 20,870 6,100 7,290 10,20 17,890 26,800 7,690 9,170 1,220 22,20,80 9,70 11,280 16,20,60 0,900 17,90 2,10 2,280 62,700 2,070,90 60,290 89,120 81,80 120,220 10,880 1,920 1,070 1,060 1,00 1,00 1,020 1, ,62 1,9 2,96,981 7,721 12,7 1, 2,0 2,622,178 8,08 1,1 2,2 2,862, 8,77 1,0 2,10,086,899 9,21 1,2 2,76,29,226 10,028 16,86 2,71,92, 10,602 17,29,91 6,2 11,909 19,60,8 6,86 1,06 21,200 22,8 1,0 2,2 6,060 8, 1 17,710,0 6,670 6,70 9,100 11, 18,80,960 9,20 9,90 12,70 20,20,00 6,070 10,720 1,70 21,790 1,910 68,610 11,60 1, 2,20,610 72,890 12,10 1,0 2,620 7,160 76,920 17,0,70 2, 86,120 19,00 0,00 8,120 9,00 62, ,620 66, ,20,70 8,2 10,6 17,17,02 7,7 6,87 9,6 12,17 19,90 8,666 6,9 11,99 1, 2,7 8,6 81,06 1,70 18,9 0,2 9,200 98,7 17,69 22,712 6,268 70,7 116,79 20,81 26,69 2,61 82,28 16,28 7,8 9,69 11,07 188,88 9,6 78,7 10,708 26,1 189,106 08, 229,82 7, ,200 1,90,80 6, ,070 1,80 2,210,70 7,0 1,60 1,70 2,800,90 9,160 1,670 2,10,0 6,690 11,110 2,000 2,70,100 7, 1 2,0,020,810 9,20 1,0,20 6,70 1,000 21,0,90 8,860 17,00,860 21,70,860 2, 2,290 in. mm in. mm in. mm in. mm in. mm in. mm in. lbs. kg lbf N lbf N lbf N lbf N lbf - in Nm lbf - in Nm PAA PA " P /16" PC " P " PF /" PG 1" Series: Cross Section Size: "

51 101 S-SERIES 100 0C Stainless Steel Large iameter Light eight Small Cross Section Snap-Over Separator RAIAL CONTACT, C-TYPE THIN SECTION ALL EARINGS SAA Series: Cross Section Size: " SA " S /16" SC " S " SF /" SG 1" *NUMER* eight LOA RATINGS iameter Outside iameter NOMINAL IMENSIONS Land iameter Li -Inner Ring Lo -Outer Ring ore SAA10CL0*RC SAA1CL0*RC SAA17CL0*RC SA020CP0*RC S020CP0*RC SA02CP0*RC S02CP0*RC SA00CP0*RC S00CP0*RC SA0CP0*RC S0CP0*RC SA00CP0*RC S00CP0*RC SC00CP0*RC S00CP0*RC SF00CP0*RC SG00CP0*RC SA02CP0*RC S02CP0*RC SC02CP0*RC S02CP0*RC SF02CP0*RC SG02CP0*RC SA0CP0*RC S0CP0*RC SC0CP0*RC S0CP0*RC SF0CP0*RC SG0CP0*RC SA07CP0*RC S07CP0*RC SC07CP0*RC S07CP0*RC SF07CP0*RC SG07CP0*RC SA00CP0*RC S00CP0*RC SC00CP0*RC S00CP0*RC SF00CP0*RC SG00CP0*RC SA0CP0*RC S0CP0*RC SC0CP0*RC S0CP0*RC SF0CP0*RC idth ,10 1,0 1,10 1,290 2,100,60 8,210 1,70 1,80,190,60 8,210 1,0 1,90 2,0,20,90 8,760 1,20 2,00 2,60,0 6,210 9,00 1,90 2,10 2,90,760 6,90 9,80 2,60 2,80,100 7,00 1,290 2,02,020,10,690,070,00,960,070 6,80,70 9,0 1,700 2,80 6,20 6,090 8,10 9,880 1,190 6,20 6,10 8,670 10,10 1,210 26,80 8, 6,760 9,00 10,90 1,700,620 1,70 7,070 9,60 11,20 16,70 28,870 10,00 12,90 18,20 1, ,080 1,60 1,10 1,0 2,00 2,0 1,980 2,0,110,90 7,980 12,960 2,70,0,110 8,00 12,960 2,200 2,920,0,60 8,820 1,820 2,10,00,610,620 9,220 1,680 2,20,210,780, 9,600 1,0 2,,00,110 6,80 10,70 2,10 2,890,87,800 6,90,80 6,810 9,120 10,10 8,810 11,700 1,80 22,020,00 7, 9,00 12,190 1,0 22,70 7,70 7, 9,790 12, 1,00 2,290,20 61,70 10, ,060 2,000 1,010 6,00 10,760 1,280 16,810 26,60 2,700 69,170 11,790 1,70 18,280 28,820 6, ,020 1,0 1,60 2,20 2,0 1,880 2,680 1, 2,810 2,080 2,90,70 6,20 11,20 19,0 2,110,000,80 6,80 11,810 19,0 2,170,910 6,820 12,200 20,290,110, 6,80 12,90 21,10 2,20,190,00 7,00 12,710 21,90 2,20,280,170 7,0 1,170,910,0,916 7,00 10,20 7,870 11,170 8,60 11,920 8,80 1 9,20 1,120 16,60 29,000 0,800 86,70 9,0 1,0 17,00 29,0 2,0 86,70 9, 1,700 17,0 0,0,0 90,20 9,880 1,80 17, 0,0,60 9, 9,960 1,190 17, 1,20 6,0 97,60 10,20 1,90 18,0 2,0 8, ,60 1,20 1,680 2,0 2,720,0 7,80 12,960 1,880,00,860 8,00 1,600 2,810,60,60 9,0 1,200 2,10,700,910 10,10 16,890 2,0,10,060 6,70 11,00 18,,00,070,80 12, , ,00 1, ,10 1, ,20 2, ,70 16,80 11,80 10,20 8,890 8, 7,0 7,110 6,10 6,00,0,20,710,60,70,0,210,0,80,20,210,210,160,100,60,90,900,60,760,720,60,0,0,00, ,020 1,290 2,20,90 6, ,00 1,20 2,0,070 6, ,060 1,0 2,0,210 7, ,070 1,70 2,60,10 7, ,0 2,0,80 7, ,10 1,0 2,0,0 1,0 1,60 2,0 2,90,60 2,710,80 2,890,090,10,0,70 10,010 17,0 29,800,20,80,870 10,100 18,100 29,800,0,720 6,010 10,0 18,70 1,10,80,760 6,090 10,00 19,170 2,0,0,890 6,180 10,810 19,80,670,60,00 6,10 11,170 20, ,070 1,10 1,220 1,90 2,10 2,0,280,870 10,80 19,0 2,70,0 6,20 11,810 20,10 2,060 2,960 6,820 12,810 22,20,10,070 7,180 1,70 2,00 2,0,0,0 7,70 1,620 26,0 2,,900 8,720 16, ,20 2, ,0 2, ,0 2, ,0 2, , 2, ,860 in. mm in. mm in. mm in. mm in. mm in. mm in. lbs. kg lbf N lbf N lbf N lbf N lbf - in Nm lbf - in Nm

52 10 S-SERIES 102 SAA Series: Cross Section Size: " SA " S /16" SC " S " SF /" SG 1" RAIAL CONTACT, C-TYPE THIN SECTION ALL EARINGS 0C Stainless Steel Large iameter Light eight Small Cross Section Snap-Over Separator *NUMER* eight LOA RATINGS iameter Outside iameter NOMINAL IMENSIONS Land iameter Li -Inner Ring Lo -Outer Ring ore SG0CP0*RC SA060CP0*RC S060CP0*RC SC060CP0*RC S060CP0*RC SF060CP0*RC SG060CP0*RC SA06CP0*RC S06CP0*RC SC06CP0*RC S06CP0*RC SF06CP0*RC SG06CP0*RC SA070CP0*RC S070CP0*RC SC070CP0*RC S070CP0*RC SF070CP0*RC SG070CP0*RC SA07CP0*RC S07CP0*RC SC07CP0*RC S07CP0*RC SF07CP0*RC SG07CP0*RC SA080CP0*RC S080CP0*RC SC080CP0*RC S080CP0*RC SF080CP0*RC SG080CP0*RC SA090CP0*RC S090CP0*RC SC090CP0*RC S090CP0*RC SF090CP0*RC SG090CP0*RC SA100CP0*RC S100CP0*RC SC100CP0*RC S100CP0*RC SF100CP0*RC SG100CP0*RC idth 10,00 2,60,0 7,620 11,90 2,00 2,760,10,790 8,180 12,00 2,200 2,,0,10 8,70 1,10 2,0,170,790,70 9,10 10,60,70,00,810 9,880 2,810,780,0 6,00 11,000 16,20,110,190, 7,180 12,10 18,060 6,260 8,0 11,0 1, 19,790,900,110 9,120 12,280 1,720 21,10 6,0,60 9,790 1,210 1,790 22,820 8,920 8,10 10,0 16,860 2,0 1,10 7,0 11,120 1, 17,90 2,80,90 6, ,810 20,060 28,910 8,90 7,00 1,80 18,60 22,200 1,90,960 80,0 16,10 2,870,790,0 6, 11,10 18,10,100,080,790 7, ,910,20,80,120 8,020 12,670 20,20,0,670,0 8,0 1,0 21,0,770,960,790 9,00 1,200 22,890,210,0 6,70 10,060 1,70 2,0, 6,10 7,10 11,080 17,260,620 7,000 12,770 16,860 19,790 1,090 9,0 80,690 1,790 18,10 21,10,60 2,90 8,120 19,80 22,770,670 6,60 91,280 1,70 20,770 2,20 7,90 9,780 9,610 16,770 22,060 2,760 0,210, ,820 18,70 2,60 28,780,70 70, ,10 20,70,0 1,760 9,290 76, ,70 2,20,80,20 7,00 1,0 2,20 2,0,70,0 7,680 1,900 2,700 2,20,600,0 7,910 1,280 2,70 2,80,710,60 8,120 1,610 2, 2,60,720,770 8,290 26,960 2,70,860,020 8,620 1,0 28,200,00,170 8,900 16,060 29, ,200 10,760 1,00 19,220,60 60, ,180 10,900 1,0 19,70,160 61,80 109,870 11,210 16,010 20,20,190,20 11,0 11,80 16,00 20,60 6,120 6, 11,610 11,70 16,0 21,220 6,880 66, ,920 12,10 17,170 22,0 8,0 69,170 12,0 12,720 18,020 2,000,90 71,0 129,90 21,0,90,790,670 9,090 1,00 2,0,180,60 6,80 10,00 17,20 28,60,810 6,00 7,0 12,00 19,60 2,80,90 7,00 8,90 1, 22,170 6,160 6,220 8,20 9,700 1,70 2,80 1,200 7,800 10,20 12,120 19,120 0,690 0,0 9,60 12,0 1,810 2,0 7,110 60,760 2, ,00 1,700 2, ,190 1, ,60, , ,70 2,810, 880 1,170 1,70 2,160,70,710 1,080 1,0 1,670 2,0,190 6,860,170,10 2,960 2,960 2,90 2,910 2,760 2,670 2,760 2,70 2,710 2,670 2,80 2,80 2,60 2,0 2,20 2,0 2,20 2,10 2,0 2,0 2,290 2,160 2,10 2,10 2,110 2,00 2,000 1,90 1,90 1,90 1,860 1,820 7, ,170 1,90 2,80, 8,0 80 1,200 1,0 2,,790 8, ,20 1,70 2,70,920 8, ,280 2,800,00 8, ,280 1,,10 9, ,0 1,70 2,,60 9,720 1,00 1,781,0 10,00,920,690,200 6,0 11,80 20,70 7,20,780,0 6,810 11,790 21,10 7,900,870,20 6,980 12,10 21,890,00,960,690 7,120 12,60 22,20,860,00,690 7,0 12, ,70,180,920 7,700 1,210 2,80,20,00 6,20 7,920 1, 2,690, 29,80,020,0,0 9,70 18,260,00,10,70 6,110 10,760 20,160 7,00,,260 6,710 11,870 22,10 1,210,800 7,00 12, 2,100,190,0 6,190 7, 1,090 26,070 8,20,00 7,190 9,10 16,0 0,20 6,0,860 8,0 10,70 18,680,0 6,00, ,060, ,220 2,280, ,0, ,70 2,720, ,90 2,90, ,060 1,80,0 6, ,210 2,110,900 7,20 in. mm in. mm in. mm in. mm in. mm in. mm in. lbs. kg lbf N lbf N lbf N lbf N lbf - in Nm lbf - in Nm

53 10 S-SERIES 10 SAA Series: Cross Section Size: " SA " S /16" SC " S " SF /" SG 1" RAIAL CONTACT, C-TYPE THIN SECTION ALL EARINGS 0C Stainless Steel Large iameter Light eight Small Cross Section Snap-Over Separator *NUMER* eight LOA RATINGS iameter Outside iameter NOMINAL IMENSIONS Land iameter Li -Inner Ring Lo -Outer Ring ore SA110CP0*RC S110CP0*RC SC110CP0*RC S110CP0*RC SF110CP0*RC SG110CP0*RC SA120CP0*RC S120CP0*RC SC120CP0*RC S120CP0*RC SF120CP0*RC SG120CP0*RC S10CP0*RC SC10CP0*RC S10CP0*RC SF10CP0*RC SG10CP0*RC S160CP0*RC SC160CP0*RC S160CP0*RC SF160CP0*RC SG160CP0*RC S180CP0*RC SC180CP0*RC S180CP0*RC SF180CP0*RC SG180CP0*RC S200CP0*RC SC200CP0*RC S200CP0*RC SF200CP0*RC SG200CP0*RC SC20CP0*RC S20CP0*RC SF20CP0*RC SG20CP0*RC SC00CP0*RC S00CP0*RC SF00CP0*RC SG00CP0*RC SF0CP0*RC SG0CP0*RC SF00CP0*RC SG00CP0*RC idth,10,90,70 7,870 1,260 19,700,720,000,90 8,0 1,0 21,0,810 6,910 9,920 16, 2,620 6,620 7,880 11,290 18,900,910 7,0 8,80 12, 21,160 1,190 8,20 9,800 1,020 2,20,70 12,200 17,0 29,060 2,680 1,610 20,860,700 0,890 0,0 9,100, 67,10 1,170 20,20 2,0,010 8,980 87,0 16,0 22,20 26,70 8,00 6,010 9,90 2,80 0,70,10 7, ,20 29,0,00 0,220 8,070 12,10,090,20 6,0 9,120 18,70 6,700,90 62,60 10,180 1,0,0 77,80 129,0 189,80 6, 92,790 1,0 226,70 179,90 262,890 20,70 299,10,110 6,700 7,800 12,100 18,790 29,980,60 7,290 8,80 1,10 20,0 2,0 8,0 9,820 1,180 2,10 7,080 9,620 11,160 17,20 26,80 1,810 10,780 12,0 19,260 29,60 6,0 11,90 1,80 21,20 2,620,20 17,200 26,10 0,0,110 20,60 7,960 7,90,610 86,680,00 98,90 22,70 29,800,700,820 8,80 1,60 2,70 2,0 7,720 8,0 90,80 1,900 7,90,680 67,20 10,10 16,90 2,790 9,60 76,60 117,790 18,980 7,90, 8,670 11,90 207,020,110 61,610 9,80 2,90 76,0 117,80 179,10 280,70 91,60 10,00 21,0,0 27,70 8,70 281,70 8,0 2,980,10,280 9,220 16,610 0,060,0,70 9,0 17,200 0,,20,800 10,00 18,090 2,710,800 6,00 10,00 19,000,0,00 6,0 10,870 19,980,,260 6,670 11,80 20,70 6,780 7,00 12,260 21,910 0,100 8,000 1,0 2,620 2,0 2,,120 26,0 7,080 1,260 18,70 2,90 1,010 7,880 1,710 1,700 18, 2,0 2,80 76,0 17,80 20,110 2,800,620 80,70 1,00 21,0 26,910 6,710 8,20 12,0 22,60 28,20 8,0 88,880 18,620 2,00 29,670 0,620 91,00 1,610 2,70,0 97,60 178,70,90 9,780 10, , , , , ,20 11,00 1,160 17,70,80,160 71,90 1,620 17,90 20,980 2,80,860 8,100 2,180 28,20,020 69,00 111,20 1,70 6,0 6,80 88,690 12,10,90,960 71,0 110,80 176,870 8,20 6,0 87,00 1,0 21,210 87,290 1, ,0 28,10 12, ,20 29, 6,60 7,620 62,100,90 808,20 1,00 1,710 2,010,10, 8,10 2,00 2,70,710,860 9,00 2,70,190, 7,800 12,70,0,10 6,20 10,020 16,060,60,190 8,00 12,20 19,980,80 6,80 9,870 1,00 2,20 9,860 1,220 2,0 7,080 1,110 21,70,0,90 70,0 8,290 91,0 1,760 1,70 1,700 1,670 1,0 1,620 1,620 1,70 1,00 1,0 1,80 1,60 1,0 1,20 1,220 1,210 1,190 1,180 1,090 1,090 1,080 1,070 1, ,00 1,6 1,879,180,8 10,60 1,078 1, 1,97,20 6,10 10,690 1,680 2,1,60 6,620 11,280 1,812 2,21,688 7,10 11,820 1,96 2,78,9 7,7 12,67 2,0 2,626,16 7,986 1,0 2,962,689 8,9 1,91,260,1 9,828 1,9 10,60 17,19 11,02 18,07,80 6,0 8,60 1,10 2,90 6,080,800 6,80 8,780,160 7,0 7,70 9,80 1,0 29,0 0,180 8,060 10,20 16,10 2,80 8,610 11,020 17,90,620,010 9,10 11,680 18,20,20 8,020 1,180 20,860,870 6,900 1,00 22,920,720 71,010 7,160 76,90 0,0 81,0 6,700 9,0 12,020 21,210,00 72,10 7,0 10,0 1,0 2,070,80 80,80 12,90 16,680 29,100,80 98,10 1,670 19,80,,0 116,0 18,90 2 0,200 7,910 1,0 21,70,170 6,680 8,80 1,90 7,070 62,0 112,80 208,0 8,610 82,010 1,0 2,80 178,0 17, 216,20 86, ,060 1,60 2,00,10 8, ,190 1,0 2,720,90 9,100 1,60 1,880,290 6,00 11,090 2,20,920 7,190 1,170 2,,0 8,60 1,10 2,10,0 9, 17,60,190 7,060 12,70 2,60,90 9,0 16,10 29,780 20,170,890 2,0,620 in. mm in. mm in. mm in. mm in. mm in. mm in. lbs. kg lbf N lbf N lbf N lbf N lbf - in Nm lbf - in Nm

54 107 S-SERIES 106 SAA SA " S /16" SC " S " SF /" SG 1" Series: Cross Section Size: " 0C Stainless Steel Large iameter Light eight Small Cross Section Circular Pocket Separator L L s i L o to clear f max ( places) 1 ANGULAR CONTACT, A-TYPE THIN SECTION ALL EARINGS *NUMER* eight LOA RATINGS iameter Outside iameter NOMINAL IMENSIONS Land iameter Li -Inner Ring Lo -Outer Ring Ls -Counter ore ore SAA10AG0*RC SAA1AG0*RC SAA17AG0*RC SA020AR0*RC S020AR0*RC SA02AR0*RC S02AR0*RC SA00AR0*RC S00AR0*RC SA0AR0*RC S0AR0*RC SA00AR0*RC S00AR0*RC SC00AR0*RC S00AR0*RC SF00AR0*RC SG00AR0*RC SA02AR0*RC S02AR0*RC SC02AR0*RC S02AR0*RC SF02AR0*RC SG02AR0*RC SA0AR0*RC S0AR0*RC SC0AR0*RC S0AR0*RC SF0AR0*RC SG0AR0*RC SA07AR0*RC S07AR0*RC SC07AR0*RC S07AR0*RC SF07AR0*RC SG07AR0*RC SA00AR0*RC S00AR0*RC SC00AR0*RC S00AR0*RC SF00AR0*RC SG00AR0*RC SA0AR0*RC S0AR0*RC SC0AR0*RC S0AR0*RC SF0AR0*RC idth , ,0 1,10 1,0 1,10 1,790 1,90 2,00 2,0,0 6,0 9,80 1,80 2,10 2,710,70 6,600 9,90 1, 16,801,90 7,090 10,0 2,0,020,10 7,0 10,900 1,80,180,0 7,70 11,70 2,020 2,70,0,70 8,10 1,0 2,10 2,82,0,80,0,960,070 6,890,80 7,960 6,0 9,070 11,0 1,790 28,20 2,170 7,00 9,60 12,00 16,680 29,60,260 7,80 7,70 12,720 17,70 6,0 10,0 1,0 18,60 2,610 8,90 8,180 11,120 1,10 19,10,670 0,80 8, 12,190 1,00 21,080 6,960 1,80 1,80 2,280,10 2,780,860,290,70,790,180,00,890 7,60 10,260 18,0,60,0 6,200 7,820 10,80 19,00 28,70,810 6,00 8,0 11,00 20,60 0,100,060 6,910 8,720 11, 21,160 1,60,10 7,210 9,170 12,0 21,870 2,80,820 7,920 9,920 1,680 2,980,10 6,10 8,10 10,10 1,010 12,70 17,170 1,0 19,880 16,860 2,00 19,10 26,200 2,70,60 81,80 121,700 20,20,80,790 8,170 8,70 1,800 21,00 28,910 6,790 0,710 91,010 1,890 22,0 0,70 8,790,20 9,120 1,90 2,620 2,070 0,790,780 97,280 16,00 2,890,20,10 60,80 106, ,1 1,70 2,60 1,860 2,680 1,980 2,800 2,070 2, 2,180,10,080 6,020 12,620 21,290 2,20,170,180 6, 12,70 21, 2,260,20,260 7, ,690 2,10,290,0 7,280 1,80 2,70 2,60,0,0 7,00 1 2,00 2,10,0 7, 1,980,0,890 6,29 7,700 10,90 8,0 11,920 8,810 12,60 9,210 1,210 9,700 1,920 18,10 26,780 6,10 9,700 9,960 18,90 1,090 6,670 97,820 10,00 1,10 18,90 1,760 8, ,90 10,280 1,0 19,10 2,80 9,20 10,90 10,00 19,790 2,920 9, ,90 10,720 1,80 20,190 62,190 16,80 11,80 10,20 8,890 8, 7,0 7,110 6,10 6,00,0,20,710,60,70,0,210,0,80,20,210,210,160,100,60,90,900,60,760,720,60,0,0,00, , ,080 1,10 2,070,0 7, ,090 1,0 2,10,0 7, ,120 1,70 2,60,0 7, ,10 1,00 2,0,610 8, ,160 2,0, 8, ,200 1,60 2,60,820 1,70 1,690 2,1 2,670,780 2,80,090,020,10,0,0,800 6,0 9,210 19,0 2,,0,80 6,10 10,720 19,0,720,70,980 6,0 10,90 20,20,790,60,070 6,670 11,170 20,0,80,600,160 6,80 11,0 20,680 6,880,690,0 6,90 11,70 21,0 in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. lbs. kg lbf N lbf N lbf N lbf N lbf - in Nm lbf - in Nm

55 109 S-SERIES 108 SAA SA " S /16" SC " S " SF /" SG 1" Series: Cross Section Size: " 0C Stainless Steel Large iameter Light eight Small Cross Section Circular Pocket Separator L L s i L o to clear f max ( places) 1 ANGULAR CONTACT, A-TYPE THIN SECTION ALL EARINGS *NUMER* eight LOA RATINGS iameter Outside iameter NOMINAL IMENSIONS Land iameter Li -Inner Ring Lo -Outer Ring Ls -Counter ore ore SG0AR0*RC SA060AR0*RC S060AR0*RC SC060AR0*RC S060AR0*RC SF060AR0*RC SG060AR0*RC SA06AR0*RC S06AR0*RC SC06AR0*RC S06AR0*RC SF06AR0*RC SG06AR0*RC SA070AR0*RC S070AR0*RC SC070AR0*RC S070AR0*RC SF070AR0*RC SG070AR0*RC SA07AR0*RC S07AR0*RC SC07AR0*RC S07AR0*RC SF07AR0*RC SG07AR0*RC SA080AR0*RC S080AR0*RC SC080AR0*RC S080AR0*RC SF080AR0*RC SG080AR0*RC SA090AR0*RC S090AR0*RC SC090AR0*RC S090AR0*RC SF090AR0*RC SG090AR0*RC SA100AR0*RC S100AR0*RC SC100AR0*RC S100AR0*RC SF100AR0*RC SG100AR0*RC idth 12,20 2,190 2,,70,10 9,00 1,0 2,70,060,0 9,770 1,220 2,0,0,20,920 10,0 1,160 2,720,700,0 6,20 11,000 16,110 2,890,90,90 6,710 11,70 17,060,20,00,20 7,00 1,190 18,960,90,890 6,10 8,290 1,20 20,80,800 9,70 1,00 16,680 22,820 0,210 9,00 10,0 1,20 18,060 2,600,60,20 11,00 1,0 19,220 26,0 6,70 67,0 12,100 16,60 20,600 28,110 8,90 71, 1 17,0 22,020 29,80 2,180 7,890 1,10 19,70 2,0,60 8,670 8,0 1, 2,10 6,880 6,10 92,70,70 6,20 8,0 10,820 1,820 26,100 8,00 6,80 9,20 11,720 1,960 28,220 1,00 7,0 9,960 12,70 17,100 0,0,780 7,80 10,670 1,80 18,20 1,70 6,0 8,0 11,80 1,280 19,80,860 9,20 9,60 12,700 1,90 21, 8,090,720 10,70 1,120 17,70 2,90 1,620 60,190 18,220 28,110 8,0 8,10 6, , ,70 0,80 2,10 70, 12,0 182,60 2,,00,70 76,060 1,910 19,70,870 7,60 9,20 81,10 11, ,890 7,10 0,620,20 86,210 10, ,070 1,60 6,90 70,860 96,0 169,0 2,10 6,10 62,810 78, ,90 18,10 267,70 2,960,600,690 7,880 1,0 2,700 2,80,,80 8,070 1,920 26,10 2,600,760,980 8,260 1,0,160 2,,860,090 8,20 1,90,710 2,770,90,210 8,670 16,020 28,0,080,00 9,000 16,760 29,0,000,290,70 9,0 17,0 0, ,00 11,120 16,010 20,860,00 6,0 11,20 11,80 16,20 21,80,900 66,70 117,80 11,70 16,70 22,10 6,70 68, ,810 11,80 17,170 22,60 7,900 69,0,260 12,20 17,70 2,180 8,70 71, ,60 12,720 18,10 2,020 0,00 7,0 11,00 1,0 19,080 2,780 77,090 16,200,170,10 2,960 2,960 2,90 2,910 2,760 2,670 2,760 2,70 2,710 2,670 2,80 2,80 2,60 2,0 2,20 2,0 2,20 2,10 2,0 2,0 2,290 2,160 2,10 2,10 2,110 2,00 2,000 1,90 1,90 1,90 1,860 1,820 8, ,20 1,620 2,720,010 8, ,260 1,670 2,780,10 9, ,00 1,720 2,80,290 9, ,0 2,90,80 9, ,60 1,800 2,,20 9,800 1,10 1,860,100,780 10,190 1,00 1,80 1,92,20,980 10,60 8,00,80,20 7,210 12,100 22,290,10,960,600 7,0 12,70 2 0,20,780 7, 12,680 2,0 1,680,090, ,90 2,0,0 6,00 8,010 1,00 2,0,90,00 6,0 8,0 1,790 2,710,0,80 6,80 8,60 1,10 26,600 6, in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. lbs. kg lbf N lbf N lbf N lbf N lbf - in Nm lbf - in Nm

56 111 S-SERIES 110 SAA SA " S /16" SC " S " SF /" SG 1" Series: Cross Section Size: " 0C Stainless Steel Large iameter Light eight Small Cross Section Circular Pocket Separator L L s i L o to clear f max ( places) 1 ANGULAR CONTACT, A-TYPE THIN SECTION ALL EARINGS *NUMER* eight LOA RATINGS iameter Outside iameter NOMINAL IMENSIONS Land iameter Li -Inner Ring Lo -Outer Ring Ls -Counter ore ore SA110AR0*RC S110AR0*RC SC110AR0*RC S110AR0*RC SF110AR0*RC SG110AR0*RC SA120AR0*RC S120AR0*RC SC120AR0*RC S120AR0*RC SF120AR0*RC SG120AR0*RC S10AR0*RC SC10AR0*RC S10AR0*RC SF10AR0*RC SG10AR0*RC S160AR0*RC SC160AR0*RC S160AR0*RC SF160AR0*RC SG160AR0*RC S180AR0*RC SC180AR0*RC S180AR0*RC SF180AR0*RC SG180AR0*RC S200AR0*RC SC200AR0*RC S200AR0*RC SF200AR0*RC SG200AR0*RC SC20AR0*RC S20AR0*RC SF20AR0*RC SG20AR0*RC SC00AR0*RC S00AR0*RC SF00AR0*RC SG00AR0*RC SF0AR0*RC SG0AR0*RC SF00AR0*RC SG00AR0*RC idth,90,0 6,720 9,080 1,880 22,70,290,80 7,290 9,870 17,100 2,60 6,760 8,90 11,0 19,790 28,0 7,710 9,680 1,00 22,80 8, 10,880 1,610 2,10 6,020 9,610 12,00 16,190 28,100,810 20,10,700 9,280 17,960 8,760 8,80 68,20,220 77,720 17,0 2,800 29,890 0,0 70,60 101,200 19,080 2,980 2,0,900 76, ,600 0,070 7,770 0,90 88,00 126,60,00,060 7, ,000 1,20 8,20 8,00 6, 11,00 160,220 2,70,0 72,020 12, ,080 66,280 89,90 1,0 219,210 79, ,160 18, ,80 21,200 0,0 2,0,720 11,80 1,0 19,0 26,220,80 6, 12,0 16,860 21,00 28,00 9,80 71,10 19,00 2,00,060 7,10 82,080 22,20,90 7,620 6,890 9,020 2, 1,10 2,180 7,60 10,70,720 6,70 81,120 1,280 8,10 100,200 12,00,80 69,0 119, ,600 1, ,000 19,00 22,00 0,620 68,680 86,20 116,0 20,90 292,070,110 7,000 9,90 126, , 16,0 86,70 108,980 17,060 2,170 6,110 98, 12,0 167,0 288, 111,160 1, ,0 26,20 62,620,0 1,0 207,910 60,80 192,20 28,620,710 2,980 20,60 09,0,0 7,20 621,20 876,00 709,00 998,180,100,0,780 9,600 17,870 1,,0,980 9,90 18,0 2,70,80 6,0 10,0 19,90,10,10 6,70 11,00 20,10,80,0 7,280 11,0 21,210 7,20,900 11,920 22,680 8,80 9,010 1,0 26,100 1,20 10,160 1,260 29,0 6,020 2,80 0,80,80,0 1,790 19,0 2,710 2,700 79,90 10,80 1,20 20,060 26,600,260 81,80 1,880 21,0 28,160, 86,700 1,910 22,910 29,90 9,060 90,0 19,70 2,0 2,80 0,670 9,0 16,610 26,20,610, , ,720 0,080 60,20 116,100 18,20,190 67,880 10,910 20,710 1, ,10 18,0 26,610 1,760 1,70 1,700 1,670 1,0 1,620 1,620 1,70 1,00 1,0 1,80 1,60 1,0 1,20 1,220 1,210 1,190 1,180 1,090 1,090 1,080 1,070 1, ,072 2,07,10 6,2 10,920 1,128 1,62 2,17,0 6,87 11,20 1,767 2,7,82 7,0 1 1,907 2,,86 7, 12,60 2,08 2,707,11 8,10 12,898 2,162 2,8,6 8,62 1,612,2,908 9,8 1,2,61,7 10, 16,687 11,82 17,982 12,17 19,1,770 6,80 9,110 1,720,700 8,70,020 7,220 9,0 1,260 28,860 9,90 7,860 10,0 1,90 1,0 2,60 8,80 11,0 17,10,60,980 9,070 12,00 18,00 6,00 7,70 9,620 12,70 19,80 8,090 60,0 1,80 21,80 2,60 67,790 1,80 2,010 6,80 7,20 0,0 79,,00 8,200 in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. lbs. kg lbf N lbf N lbf N lbf N lbf - in Nm lbf - in Nm

57 11 S-SERIES 112 0C Stainless Steel Large iameter Light eight Small Cross Section Snap-Over Separator SAA SA " S /16" SC " S " SF /" SG 1" Series: Cross Section Size: " -POINT CONTACT, X-TYPE THIN SECTION ALL EARINGS L L o i 1 to clear f max ( places) *NUMER* eight LOA RATINGS iameter Outside iameter NOMINAL IMENSIONS Land iameter Li -Inner Ring Lo -Outer Ring ore SAA10XL0*RC SAA1XL0*RC SAA17XL0*RC SA020XP0*RC S020XP0*RC SA02XP0*RC S02XP0*RC SA00XP0*RC S00XP0*RC SA0XP0*RC S0XP0*RC SA00XP0*RC S00XP0*RC SC00XP0*RC S00XP0*RC SF00XP0*RC SG00XP0*RC SA02XP0*RC S02XP0*RC SC02XP0*RC S02XP0*RC SF02XP0*RC SG02XP0*RC SA0XP0*RC S0XP0*RC SC0XP0*RC S0XP0*RC SF0XP0*RC SG0XP0*RC SA07XP0*RC S07XP0*RC SC07XP0*RC S07XP0*RC SF07XP0*RC SG07XP0*RC SA00XP0*RC S00XP0*RC SC00XP0*RC S00XP0*RC SF00XP0*RC SG00XP0*RC SA0XP0*RC S0XP0*RC SC0XP0*RC S0XP0*RC SF0XP0*RC idth ,10 1,0 1,10 1,290 2,100,60 8,210 1,70 1,80,190,60 8,210 1,0 1,90 2,0,20,90 8,760 1,20 2,00 2,60,0 6,210 9,00 1,90 2,10 2,90,760 6,90 9,80 2,60 2,80,100 7,00 1,290 2,02,020,10,690,070,00,960,070 6,80,70 9,0 1,700 2,80 6,20 6,090 8,10 9,880 1,190 6,20 6,10 8,670 10,10 1,210 26,80 8, 6,760 9,00 10,90 1,700,620 1,70 7,070 9,60 11,20 16,70 28,870 10,00 12,90 18,20 1, ,000 1, 1,710 2,0 2,80 2,70,0 2,80,860,220,70,260 7,700 1,00 20,20,10,70,60 7,980 1,110 20,20,600,880,860 8,0 1,810 21,890,790,080 6,160 8,80 1,20 2,260,980,80 6,60 9,10 16,220 2,620,60,890 7,060 10,260 17,0,20,0 6,0 7,610 10,10 9,00 12,0 10, 12,680 17,170 1,20 19,0 2,00,20 9,610 91,280 1,170 20,0 2,70,00 62,760 91,280 16,010 21,710 26,070 8,00 6,880 97,70 16,860 22,600,00,20 69,00 10,70 17,700 2,90 28,70 1,860 72,10 109,20 19,0 26,200 1,00,60 78, ,000 1,20 1,70 1,20 1,880 1,10 1, 1,80 2,100 1,0 2,210 2,810,890 8,80 1,10 1,90 2,20 2,870,920 8, 1,10 1,610 2,00 2,920,080 9,180 1,820 1, 2,10 2,,10 9,80 16,70 1,680 2,80,00,0 9,20 17,110 1,720 2,60,120,0 9,820,020,0,8,70 7,70,870 8,60 6,0 8,80 6,80 9,0 6,890 9,80 1 2,280 67,0 7,070 9,920 12,770 21,890, 67,0 7,160 10,20 12, 22,600 0,80 70,70 7,0 10,280 1,210 22,820 1,720 7,260 7,70 10,90 1,20 2,0 2,0 76,110 7, 10,90 1,880 2,20, ,080 1,10 2,10 2,90 2,70,770,600 6,90 12,70 20,20,170,10 7,80 1,110 21,0,20,690,710 8,0 1,0 2,080,790,10 6,20 9,280 17,070 26,70,180,720 6,90 10,0 18, 29,0,020 6,80 8,00 12,10 22, ,0 2, ,90 2, ,760 2, ,00 1,90, ,170 2,110, ,0 2,90 10,110 7,110 6,190,0,190,60,0,690,620,10 2,820 2,780 2,70 2,670 2,0 2,00 2,670 2,0 2,90 2,0 2,00 2,290 2,0 2,90 2,60 2,00 2,290 2,180 2,00 2,70 2,0 2,290 2,180 2,290 2,260 2,20 2,180 2,000 2,060 2,00 2,000 1, , ,091 1,17 2,11,66 7, ,120 1,6 2,,79 7, ,16 1,0 2,,92 8,20 8 1,19 1,6 2,96,08 8, ,26 2,92,172 8, ,0 1,687 2,72,1 1,200 1,80 1,82 2,290,70 2,90,770,10,120,0,60,80 6,00 10,280 20,70,90,980 6,0 10,80 21,0,220,600,180 6,720 10, ,00,710,10 6, ,0 7,70,820,00 7,120 11,0 2,010 8,980,00,800 7,00 12, , ,20 1,110 1,20 2,60,00 8,0 1,10 1,0 2,00 2,,670 8,99 1,910 1,0 2,80,080 9,69 17,00 1, 2,0,00,80 10,16 18,90 1,760 2,20,0,800 11,17 20,0 1,,717 6,0 12, , ,020 1, , ,180 2, ,260 2, ,0 in. mm in. mm in. mm in. mm in. mm in. mm in. lbs. kg lbf N lbf N lbf N lbf N lbf - in Nm lbf - in Nm

58 11 S-SERIES 11 L L o i 1 to clear f max ( places) 0C Stainless Steel Large iameter Light eight Small Cross Section Snap-Over Separator SAA SA " S /16" SC " S " SF /" SG 1" Series: Cross Section Size: " -POINT CONTACT, X-TYPE THIN SECTION ALL EARINGS *NUMER* eight LOA RATINGS iameter Outside iameter NOMINAL IMENSIONS Land iameter Li -Inner Ring Lo -Outer Ring ore SG0XP0*RC SA060XP0*RC S060XP0*RC SC060XP0*RC S060XP0*RC SF060XP0*RC SG060XP0*RC SA06XP0*RC S06XP0*RC SC06XP0*RC S06XP0*RC SF06XP0*RC SG06XP0*RC SA070XP0*RC S070XP0*RC SC070XP0*RC S070XP0*RC SF070XP0*RC SG070XP0*RC SA07XP0*RC S07XP0*RC SC07XP0*RC S07XP0*RC SF07XP0*RC SG07XP0*RC SA080XP0*RC S080XP0*RC SC080XP0*RC S080XP0*RC SF080XP0*RC SG080XP0*RC SA090XP0*RC S090XP0*RC SC090XP0*RC S090XP0*RC SF090XP0*RC SG090XP0*RC SA100XP0*RC S100XP0*RC SC100XP0*RC S100XP0*RC SF100XP0*RC SG100XP0*RC idth 10,00 2,60,0 7,620 11,90 2,00 2,760,10,790 8,180 12,00 2,200 2,,0,10 8,70 1,10 2,0,170,790,70 9,10 1,680,70,00,810 9,880 2,810,780,0 6,00 11,000 16,20,110,190, 7,180 12,10 18,060 6,260 8,0 11,0 1, 19,790,900,110 9,120 12,280 1,720 21,10 6,0,60 9,790 1,210 1,790 22,820 8,920 8,10 10,0 16,860 2,0 1,10 60,80 11,120 1, 17,90 2,80,90 6, ,810 20,060 28,910 8,90 7,00 1,80 18,60 22,200 1,90,960 80,0 2,,70 6,00 7, 11,120 19,00 28,70,120 6,910 8,0 11, 20,60 0,100,00 7,20 8,870 12,80 21,870 2,80,880 7,920 9,70 1,680 2,280,200 6,260 8,0 10,070 1,0 2,690 6,90 7,020 9,0 11,0 16,20,0 1,00 10,60 12,70 17,960 0,0,10 11,610 21,080 28,70 9,60 8,70 1,800 22,770 0,70 6,790,20 91,010 1,890 2,70,010,60 7,070 97,280 16,00 26,160,20 2,120 60,80 10,0 12,10,80 7,00,790 6, ,80 16,20 1,20 2,00 0,10 72, ,70 182,60,610 6,0,70 79,890 1, ,790 17,60 2,0,220,610 10,10 18,290 1,80 2,90,00,70 10,80 18,20 1,80 2,,20,880 10,60 19,0 1,890 2,70 6,060 10,90 19,60 1, 2,790,60 6,170 11,190 20,20 2,00 2,890,690 6,10 11,0 21,020 2,180,90 6,680 12,100 21,790 77,670 7,920 11,00 1,20 2,90,10 81,60 8,180 11,20 1,680 2,0 6,170 82,80 8,20 11,80 1,210 26,160 7,0 8,980 8,10 12,10 1,80 26,960 8,620 86,60 8,760 12,10 1,80,0 9,780 89, 9, ,10 28,0,70 9,00 9,700 1,700 17,80 29,710,820 96,90,790,90 8,080 9,770 1,0 2,710 0,220 6,910 9,10 11,70 16,760 29,,10 7,980 10, ,20,890 2,0 9,120 12,80 1,910 21,890 8,10 8,10 10,0 1,020 16,870 2,710 66,80 12, 17,600 21,10 0,870,60 82,080 1,90 21,80 2,880 7,710 6,210 99,20, ,0 2,900, ,060 1,280 1,890,0, ,20 1,80 2,170,80,90 1,00 1,00 1,680 2,70,0 6,70 1,170 1,80 1,910 2,790,880 7,0 1,70 1, 2,0,90 6,060 9,0 1,800 2,0 2,920,260 7,70 11,220 1,80 1,920 1,880 1,80 1,710 1,760 1,710 1, 1, 1,60 1,0 1,0 1,00 1,0 1,20 1,00 1,0 1,10 1,0 1,0 1,0 1,10 1,70 1,0 1,00 1,290 1,280 1,260 1,20 1,200 1,170 1,160 1,160 1,10 1,120 1,090 8, ,71 2,8,6 9,0 1,001 1, 1,8 2,980,880 9,71 1,06 1,98 1,91,10 6,10 10,208 1,089 1,9 2,007,222 6,2 10,10 1,11 1,618 2,082,8 6, 10,882 1,212 1,72 2,226,61 6,97 11,26 1,289 1,81 2,6,776 7,2 12,17,90,20 6,100 7,870 12,700 2,10 2,0,0 6,80 8,20 1,260 26,160,210, 6, 8,90 1,800,10,10,80 6,90 8,90 1,0 28,10 6,10,00 7,200 9,260 1,80 29,070 8,10,0 7,700 9,900 1,80 0,900,0,70 8,190 10,20 16,800 2,,00 22,700 2,20,27,2 7,290 1,11 2,610 2,,668,77 8,00 1,99,770 2,8,109,1 8,810 17,7 0,90,16,68,90 9,700 19,68,196,99,0 6,2 10,6 21, 6,7,20 6,00 7,80 12,69 2,10,20,96 7,121 9,201 1,872 29,608 0,12 2, ,620 2, ,810, ,000 2,000, ,210, ,200 2,20, ,0 2,870, ,00 1,680,0, in. mm in. mm in. mm in. mm in. mm in. mm in. lbs. kg lbf N lbf N lbf N lbf N lbf - in Nm lbf - in Nm

59 117 S-SERIES 116 0C Stainless Steel Large iameter Light eight Small Cross Section Snap-Over Separator SAA SA " S /16" SC " S " SF /" SG 1" Series: Cross Section Size: " -POINT CONTACT, X-TYPE THIN SECTION ALL EARINGS L L o i 1 to clear f max ( places) *NUMER* eight LOA RATINGS iameter Outside iameter NOMINAL IMENSIONS Land iameter Li -Inner Ring Lo -Outer Ring ore SA110XP0*RC S110XP0*RC SC110XP0*RC S110XP0*RC SF110XP0*RC SG110XP0*RC SA120XP0*RC S120XP0*RC SC120XP0*RC S120XP0*RC SF120XP0*RC SG120XP0*RC S10XP0*RC SC10XP0*RC S10XP0*RC SF10XP0*RC SG10XP0*RC S160XP0*RC SC160XP0*RC S160XP0*RC SF160XP0*RC SG160XP0*RC S180XP0*RC SC180XP0*RC S180XP0*RC SF180XP0*RC SG180XP0*RC S200XP0*RC SC200XP0*RC S200XP0*RC SF200XP0*RC SG200XP0*RC SC20XP0*RC S20XP0*RC SF20XP0*RC SG20XP0*RC SC00XP0*RC S00XP0*RC SF00XP0*RC SG00XP0*RC SF0XP0*RC SG0XP0*RC SF00XP0*RC SG00XP0*RC idth,10,90,70 7,870 1,260 19,700,720,000,90 8,0 1,0 21,0,810 6,910 9,920 16, 2,620 6,620 7,880 11,290 18,900,910 7,0 8,80 12, 21,160 1,190 8,20 9,800 1,020 2,20,70 12,200 17,0 29,060 2,680 1,610 20,860,700 0,890 0,0 9,100, 67,10 1,170 20,20 2,0,010 8,980 87,0 16,0 22,20 26,70 8,00 6,010 9,90 2,80 0,70,10 7, ,20 29,0,00 0,220 8,070 12,10,090,20 6,0 9,120 18,70 6,700,90 62,60 10,180 1,0,0 77,80 129,0 189,80 6, 92,790 1,0 226,70 179,90 262,890 20,70 299,10 8,0 11,80 1,680 19,670,10 9,20 9,00 1 1,880 21,80,,0 1,0 17,280 2,800 1,620 61,60 16,60 19,690 28,220 7,260 69,770 18,90 2 1,60 2,900 77,980 20,620 2,00,060 8,0 86,180 0,0,610 72, 106,700 6,20 2,160 86,760 1, ,900 17,700 11, ,00 7,,070 60,80 87,00 17,60 219,070 1,70,600 66,190 9, ,000 27,10 6,0 76, ,20 18,10,80 7, 87,90 12,0 210,220 10,0 82,690 98,260 10,70 2,10 6,870 91, ,980 1,90 260,0 8,0 1,720 19, 2,160 7,0 162,0 22,020 8,90 6,810 8,80 67,000 1,0 78,60 2,20,280,180 6,80 12,90 22,0 2,0,70,20 7,080 1,190 2,180,80,890 7,670 1,0 2,00,190,0 8,60 1,820 2,0,20,760 9,00 17,060,10,80 6,170 9,670 18,20 29,00 7,10 11,180 21,070,780 8,00 12,600 2,720 7,980 26,220 1, 28,620,770 10,20 1,90 18,90 0,80,60 100,220 10,900 1,0 19, 1,90 8,670 10,110 17,080 2,120 6,0 108,090 18,60 2,710 7,190 70,70 11,70 20,110 2,620 0,170 7, ,90 21,70,0,010 81,180 10,0 1,760 9,70 9,720 10,260,810 6,00 10,0 168,90 116,0 186,690 1,10 20,600 19,210 2, 1,110,20 77, ,200 22,770 0,770 6,80,0 91,70 18,700 1,80 9,690 71, ,800 18,700,020 6,80 9,110 18,00 27,200 68,090 81, , ,00 296,00 8,780 99,80 1,700 2,000 62,000 1, ,00 7,200, ,100, , ,200 1,06 97,100 1,80,000 2,170 2,90,0,110 8,800 1,0 2,70,160 6,00 10,60 1,670,700,610 8,120 1,870 20,870 6,100 7,290 10,20 17,890 26,800 7,690 9,170 1,220 22,20,80 9,70 11,280 16,20,60 0,900 17,90 2,10 2,280 62,700 2,070,90 60,290 89,120 81,80 120,220 10,880 1,920 1,070 1,060 1,00 1,00 1,020 1, ,62 1,9 2,96,981 7,721 12,7 1, 2,0 2,622,178 8,08 1,1 2,2 2,862, 8,77 1,0 2,10,086,899 9,21 1,2 2,76,29,226 10,028 16,86 2,71,92, 10,602 17,29,91 6,2 11,909 19,60,8 6,86 1,06 21,200 22,8 1,0 2,2 6,060 8, 1 17,710,0 6,670 6,70 9,100 11, 18,80,960 9,20 9,90 12,70 20,20,00 6,070 10,720 1,70 21,790 1,910 68,610 11,60 1, 2,20,610 72,890 12,10 1,0 2,620 7,160 76,920 17,0,70 2, 86,120 19,00 0,00 8,120 9,00 62, ,620 66, ,20,70 8,2 10,6 17,17,02 7,7 6,87 9,6 12,17 19,90 8,666 6,9 11,99 1, 2,7 8,6 81,06 1,70 18,9 0,2 9,200 98,7 17,69 22,712 6,268 70,7 116,79 20,81 26,69 2,61 82,28 16,28 7,8 9,69 11,07 188,88 9,6 78,7 10,708 26,1 189,106 08, 229,82 7, ,200 1,90,80 6, ,070 1,80 2,210,70 7,0 1,60 1,70 2,800,90 9,160 1,670 2,10,0 6,690 11,110 2,000 2,70,100 7, 1 2,0,020,810 9,20 1,0,20 6,70 1,000 21,0,90 8,860 17,00,860 21,70,860 2, 2,290 in. mm in. mm in. mm in. mm in. mm in. mm in. lbs. kg lbf N lbf N lbf N lbf N lbf - in Nm lbf - in Nm

60 SIMPLEX EARING SERIES SUPERUPLEX SEALE EARINGS to clear.01 max ( places) Mo Mi (2 places).20 REF *NUMER* ZU00MZ*RC ZU02MZ*RC ZU0MZ*RC ZU07MZ*RC ZU00MZ*RC ZU0MZ*RC ZU060MZ*RC ZU06MZ*RC ZU070MZ*RC ZU07MZ*RC ZU080MZ*RC ZU090MZ*RC ZU100MZ*RC ZU110MZ*RC ZU120MZ*RC ore Outside iameter NOMINAL IMENSIONS M i idth iameter in. mm in. mm in. mm in. mm in. mm in. per row M o LOA RATINGS eight lbs. kg lbf N lbf N lbf N lbf N lbf - in Nm lbf - in Nm (2x) 90 (2x) 90 (2x) 99 (2x) 1,00 (2x) 1,090 (2x) 1,190 (2x) 1,0 (2x) 1,00 (2x) 1,00 (2x) (2x) 1,710 (2x) 1,90 (2x) 2,110 (2x) 2,00 (2x) 2, (2x),00 (2x),20 (2x),0 (2x),670 (2x),80 (2x),290 (2x),800 (2x) 6,20 (2x) 6,670 (2x) 7,120 (2x) 7,610 (2x) 8,70 (2x) 9,0 (2x) 10,20 (2x) 11,190 (2x) 60 (2x) 6 (2x) (2x) 67 (2x) 68 (2x) 700 (2x) 70 (2x) 7 (2x) 760 (2x) 77 (2x) 81 (2x) 80 (2x) 87 (2x) 90 (2x) 9 (2x) (2x) (2x) (2x) (2x) (2x) (2x) (2x) (2x) (2x) (2x) (2x) (2x) (2x) (2x) 2,80 2,910 2,90,000,00,110,20,60,80,0,0,70,890,00,160 2,710 2,80 2,,10,28,80,92,210,9,780,10,70 6,0 6,91 7, 12,00 12,680 1,00 1, 1,610 1,920 17,60 18,70 19, 21,260 22,820 2,80 28,160 0,760,60 1,80 1,91 1,9 1,99 2,0 2,12 2,18 2,200 2,20 2,0 2,20 2,0 2,62 2,720 8,20 8,0 8,20 8,700 8,870 9,00 9,0 9,720 9,790 10,010 10,0 10,760 11,0 11,680 12,100,10,0,070,7 6,10 7,2 8,7 9,910 11,0 12,870 1,0 18,180 22,290 26,620 1, ,120 1,280 1,0 1, 2,00 2,20,010,70 1, 1,670 1,80 1, 2,10 2,0 2,8,6,90,0, 6,20 7,2 8, ,,60,280,120 2,980 2,720 2,0 2,0 2,170 2,00 1,910 1,700 1,10 1,00 SIMPLEX SERIES ZU Series are also available in low-torque design using PTFE seals. load rating is two times the value per row ideally if both rows share load equally

61 Y-PI SERIES TOLERANCE TALES & RECOMMENE FITS THERMAL-COMP EARINGS Mounted in duplex pairs Seal types as follows: 1. Composition washer with synthetic rubber seal bonded to it. 2. Synthetic rubber seal retained by composition washer.. Synthetic rubber seal retained by cadmium plated spring steel or stainless steel washer. Exposed surfaces except bore are cadmium plated Prepacked with lubricant conforming to MIL-G-27 L o L i C C 1 H THERMAL-COMP earings are custom designed to compensate for adverse effects of temperature extremes on bearing performance in airborne applications. THERMAL-COMP earings have a double-split rings design and once properly installed in bearing support structure at ambient temperature, they will maintain steady and predictable stiffness and torque characteristics throughout a temperature range, regardless of differences in coefficient of thermal expansion (CTE) of the bearing and the support structure materials. The following is a typical illustration of THERMAL-COMP earings manufactured at RC-Industrial Tectonics earings. Note that the free-state gap in ring split is determined based on bearing size and application temperatures involved. The gap will be closed to near zero when the bearing is operating at the coldest temperature in the application. The gap will be slightly wider when bearing is operating at higher temperatures. However, bearing performance will remain consistent. IMENSIONS TOLERANCES earing Number Outside iameter L i L o s eight +.000" +.000" ore -.020" -.00" (Ea. +.00mm +.00mm No. Size earing) -.mm -.1mm inch mm inch mm inch mm inch mm inch mm inch mm inch mm inch mm lbs. kg Y6PI-CR / Y80PI-CR / Y96PI-CR / Y128PI-CR / Y176PI-CR Y22PI-CR H idths C 1 (1) Inner Ring Radius C (1) Outer Ring Radius Y288PI-2-MR (1)Maximum shaft or housing fillet radius which bearing corners will clear. LOA RATINGS earing Number Limit Load Rating Limit Load Rating Limit Rating Constant Rated Capacity at Various RPM ased on 700 Hours Average Life (2) 100rpm () 00rpm () 00rpm () Type of Seal Nominal Preload In most airborne systems, large azimuth bearings are installed in support structures (shaft and housing), which have to be made from light aluminum alloys in order to control weight. hile conventional bearings may be installed and fitted for optimum stiffness and rotational torque at ambient temperature, significant variations in bearing performance will be experienced at extremes of temperature in actual application. Such variations are caused by differences in CTE of bearing materials (hardened steels) and the aluminum alloys used for the support structure. At one temperature extreme, the bearing will be internally over-loaded to a much higher stiffness and rolling friction torque; yet at another extreme, the bearing internal preload may be compromised resulting in loss of stiffness or excessive deflection. Such undesirable variations in conventional bearing performance at extremes of temperature will have to be carefully analyzed and consequences mitigated, often necessitating utilization of larger drive motors and/or using more expensive support structure alloys with CTE properties as close to bearing steel as possible. ith THERMAL-COMP earings such uncertainties in performance are greatly reduced. AS ORERE AS ORERE AS ORERE SIE VIE ISOMETRIC VIE FREE-STATE THERMAL- COMP GAP ( ) EPENING ON EARING SIZE AN APPLICATION TEMPERATURES Y-PI SERIES lbs. N lbs. N lb.-inch N-cm 1/inch 1/cm lbs. N lbs. N lbs. N lbs. N Y6PI-CR Y80PI-CR Y96PI-CR Y128PI-CR Y176PI-CR Y22PI-CR Y288PI-2-MR THERMAL- COMP The limit load ratings shown apply only to Airframe Control position where bearings are used for oscillatory service. Note: These bearings should not be used as track rollers, cam follower rolls, and the like. Equivalent Load =.2 x Load x Load or = Load, whichever is greater. Pure Rating =.8 Rating at operating speed. (2)These ratings are for single bearings. ()Heavy line indicates limiting speeds recommended for sealed bearings; for higher speeds, seals should be removed. 120 For more information visit our web site at rbcbearings.com For more information visit our web site at rbcbearings.com 121

62 122 Precision Tolerances RC THIN SECTION ALL EARINGS TOLERANCE TALES & RECOMMENE FITS The RC Thin Section earings shown in this catalog are manufactured to AEC 1F precision tolerances. here required, RC thin section ball bearings can be man u fac tured to AEC F, AEC F and AEC 7F pre ci sion tol er anc es. RC PRECISION CLASS 0 earing ore Size Inches iameters ore O.. Nominal Nominal oes not apply to bearings with preload. Race Runout & Axial Inner Max Outer Max UPLEX PAIR ITH TOLERANCES Values in inch es earing ore Size (Inches) Over Including idth Max Min AEC 1F C-TYPE Play Rotating Shaft idth efore Installation Shaft O Housing I Nominal Min Max Nominal Nominal Values in inch es Stationary Shaft Shaft O Housing I Max Min Max Min RC THIN SECTION ALL EARINGS TOLERANCE TALES & RECOMMENE FITS RC PRECISION CLASS 0 earing ore Size Inches iameters ore O.. Nominal Nominal oes not apply to bearings with preload. RC PRECISION CLASS earing ore Size Inches iameters ore O.. Nominal Nominal oes not apply to bearings with preload. AEC 1F A-TYPE & X-TYPE Race Runout Play Rotating Shaft & Axial idth efore Installation* Shaft O Housing I Inner Max Outer Max Nominal Min Max Nominal Nominal *X-Type Only AEC F ALL TYPES Race Runout Play Rotating Shaft & Axial idth efore Installation Shaft O Housing I Inner Max Outer Max Nominal Min Max Nominal Nominal C & X-Type Only Values in inch es Stationary Shaft Shaft O Housing I Max Min Max Min Values in inch es Stationary Shaft Shaft O Housing I Max Min Max Min TOLERANCES & FITS

63 12 RC PRECISION CLASS earing ore Size Inches iameters ore O.. Nominal Nominal oes not apply to bearings with preload. RC THIN SECTION ALL EARINGS TOLERANCE TALES & RECOMMENE FITS Race Runout Axial Inner Outer Inner Outer Max Max Max Max RC PRECISION CLASS 6 earing ore Size Inches iameters ore O.. Nominal Nominal oes not apply to bearings with preload. AEC F idth Nominal earing Play efore Installation (C & X-Type Only) Min C & X-Type Only ALL TYPES Rotating Shaft Shaft O Housing I Max Nominal Nominal AEC 7F ALL TYPES Race Runout Play Rotating Shaft & Axial idth efore Installation Shaft O Housing I Inner Max Outer Max Nominal Min Max Nominal Nominal Values in inch es Stationary Shaft Shaft O Housing I Max Min Max Min Values in inch es Stationary Shaft Shaft O Housing I Max Min Max Min RC THIN SECTION ALL EARINGS TOLERANCE TALES & RECOMMENE FITS FOR THIN ENSE CHROME COATE EARINGS - N-SERIES RC PRECISION CLASS 0 earing ore Size Inches iameters ore O.. Nominal Nominal oes not apply to bearings with preload. AEC 1F Race Runout & Axial idth Inner Max Outer Max Nominal A-TYPE & X-TYPE Play Rotating Shaft efore Installation Shaft O Housing I Min Max Nominal Nominal Values in inch es Stationary Shaft Shaft O Housing I Max Min Max Min TOLERANCES & FITS

64 126 RC THIN SECTION ALL EARINGS TOLERANCE TALES & RECOMMENE FITS FOR THIN ENSE CHROME COATE EARINGS - N-SERIES RC PRECISION CLASS 0 earing ore Size Inches iameters ore O.. Nominal Nominal oes not apply to bearings with preload. Race Runout & Axial Inner Max Outer Max RC PRECISION CLASS earing ore Size Inches iameters ore O.. Nominal Nominal oes not apply to bearings with preload. AEC 1F C-TYPE Play Rotating Shaft idth efore Installation* Shaft O Housing I Nominal Min Max Nominal Nominal *X-Type Only AEC F ALL TYPES Race Runout Play Rotating Shaft & Axial idth efore Installation Shaft O Housing I Inner Max Outer Max Nominal Min Max Nominal Nominal C & X-Type Only Values in inch es Stationary Shaft Shaft O Housing I Max Min Max Min Values in inch es Stationary Shaft Shaft O Housing I Max Min Max Min RC THIN SECTION ALL EARINGS TOLERANCE TALES & RECOMMENE FITS FOR THIN ENSE CHROME COATE EARINGS - N-SERIES RC PRECISION CLASS earing ore Size Inches iameters ore O.. Nominal Nominal oes not apply to bearings with preload. Race Runout Axial Inner Outer Inner Outer Max Max Max Max RC PRECISION CLASS 6 earing ore Size Inches iameters ore O.. Nominal Nominal oes not apply to bearings with preload. AEC F idth Nominal earing Play efore Installation (C & X-Type Only) Min C & X-Type Only ALL TYPES Rotating Shaft Shaft O Housing I Max Nominal Nominal AEC 6F ALL TYPES Race Runout Play Rotating Shaft & Axial idth efore Installation Shaft O Housing I Inner Max Outer Max Nominal Min Max Nominal Nominal Values in inch es Stationary Shaft Shaft O Housing I Max Min Max Min Values in inch es Stationary Shaft Shaft O Housing I Max Min Max Min TOLERANCES & FITS

65 THIN SECTION ALL EARING ENGINEERING ATA The methods, equations, and technical data presented in this section allow the user to select the correct bearings and estimate their performance for a wide range of applications. For applications with severe or unusual operating conditions, RC is prepared to provide an in-depth analysis and recommend the most suitable bearing arrangement. here standard bearings cannot be used, RC can meet the application requirements with a special bearing design specifically tailored for optimum performance. Contact your RC Sales Engineer for special sizes, materials, application requirements, dimensions and tolerances. Capacity and Fatigue Life of earings The ASIC YNAMIC RAIAL LOA RATING, C, or dynamic capacity, for a ball bearing is the calculated, constant radial load at which 90% of a group of apparently identical bearings with stationary outer rings can statistically endure 106 revolution of the inner ring. ANSI/AMA Standard 9 with correction factors for race curvatures was used to calculate the catalog ratings. The YNAMIC THRUST and YNAMIC MOMENT LOA RATINGS are also shown in the product tables. The ratings shown are a guide for the maximum loads under which these bearings should be operated with either pure thrust or pure moment loading. ratings are 2. to.0 times the radial ratings depending on the bearing type and cross section. These load ratings are not additive. For combined radial and thrust loads, an equivalent radial load is to be calculated. The ASIC STATIC LOA RATING, C o, or static capacity, is that uniformly distributed load, which produces a maximum theoretical contact stress of 609,000 psi. At this contact stress permanent deformation of ball and raceway occurs. This deformation is approximately.0001% of the ball diameter. The RATING LIFE, L 10, is a statistical measure of the life which 90% of a large group of apparently identical ball bearings will achieve or exceed. For a single bearing, L 10 also refers to the life associated with 90% reliability. Median Life, L 0, is the life which 0% of the group of ball bearings will achieve or exceed. Median life is approximately five times the rating life. The relationship between rating life, load rating, and load is: L 10 = (C/P) with L 10 = rating life (106 rev) C = basic dynamic radial load rating (lbf) P = equivalent radial load (lbf) To obtain the rating life in hours, use: L 10 hrs = 16667/N * (C/P) with N = speed (rpm) The Equivalent Load is defined as: P = XF r + YF a with F r = radial load (lbf) F a = axial load (lbf) X - see below Y - see below Contact earing Calculations For radial contact bearings calculate P with X = 1 and Y = 0. Then recalculate P with X = 0.6 and Y = (see chart below). Use the larger value of P to determine L 10 life. Fa nd 2 Y n = number of balls d = diameter of balls (in.) Angular or -Point Contact earing Calculations For angular contact and -point contact bearings calculate P with X = 1.0 and Y = 0. Then recalculate P with X = 0. and Y = Use the larger value of P to determine L 10 life. The equations are valid in the range of approximately 100 hrs to 100,000 hrs of life. Extreme loads or speeds may result in a shorter life; while in less demanding applications, metal fatigue may never affect bearing service life. Capacity and fatigue life information is based on ANSI/AMA Standard 9-1 published by: The American earing Manufacturers Association, Inc., th Street, N, Suite 00, ashington, C Adjustment Factors for Rating Life If a bearing design and operation deviates significantly from normal, it may be necessary to use additional factors to estimate the fatigue life L n. L n = a 1 * a 2 * a * L 10 hrs with a 1 = reliability factor a 2 = material & processing factor a = application factor Reliability Factor a1 Reliability is the percentage of a group of apparently identical ball bearings that is expected to attain or exceed a specified life. For an individual bearing it is the probability that the bearing will attain or exceed a specified life. Typical bearing fatigue life is calculated for 90% reliability. The life adjustment factors for other reliability numbers are shown below. Reliability % Ln Reliability Factor a1 90 L L L. 97 L. 98 L L 1.21 Material Factor a2 For standard bearings the material factor a 2 is equal to Factor a 2 is determined by material processing, forming methods, heat treatment, and other manufacturing methods. Some commonly used material factors are listed below: Material, Condition a2 max 2100, Air melt , Vacuum degassed , Air melt & TC Plate , Vacuum melt, (CEVM).00 0C, Air melt C, Vacuum melt (CEVM).00 M0, Vacuum melt (CEVM).00 M0, Vacuum re-melt (VIM-VAR) 8.00 Application Factor a The application factor a is equal to 1.0 for most applications. Unusual or extreme conditions in certain applications such as low speed, shock loading, vibration, and extreme temperature may lower the application factor to 0.0. Contact your RC Sales Engineer for help in determining this factor for your special applications. Load and Limitations The load ratings shown in the product tables are not additive. For combined simultaneous loading, an equivalent radial or thrust load must be considered. In general, C-Type bearings are designed for radial loading applications; moderate thrust and/or moment loading may be applied in combination with radial loading. For thrust loading applications use the A-Type bearing; any radial loading should only be applied in combination with thrust loading. X-Type bearings are primarily for reversing thrust and moment loading, pure radial loading should not be applied. The limiting speeds shown in the product tables are based on standard lubrication. The unsealed bearing speeds are calculated assuming the bearings are lubricated with MIL-PRF-608. speeds for sealed bearings are calculated assuming the bearings are lubricated with MIL-PRF-28 grease. If bearings are lubricated with alternate oils or greases, new limiting speeds must be calculated, see page 11. ENGINEERING ATA

66 OPERATING CONITIONS Lubrication Lubricants serve a number of very important purposes in ball bearings, including: protecting bearing surfaces from corrosion reducing rolling and sliding friction preventing metal-to-metal contact between balls and raceway providing a barrier against external contaminants (grease) removing heat (oil) The k values shown give the maximum speeds at which a typical thin section ball bearing can operate. It is recommended that operating speeds of large diameter bearings in a given series be reduced up to 0% of the calculated rating to avoid high bearing temperatures. ratings can also be impacted by load conditions, lubrication, alignment and ambient temperature. All of these factors must be considered when designing thin section ball bearings into your application. Face-to-Face, F F-Type Play play (diametral clearance) is the distance the inner ring can be moved radially from one extreme position to the other. Standard RC Thin Section earings are manufactured with enough radial play that some clearance remains after the bearing is properly installed. RAIAL PLAY PRELOA 10 Lack of lubrication or inadequate lubrication is the most common cause of bearing failure. Standard RC Thin Section earings are lubricated with either oil or grease. The unsealed bearings, the K series, are thoroughly coated in MIL-PRF-10 or MIL- PRF-608 oil and drained of excess. Sealed bearings are lubricated with MIL-PRF-28 grease. The external surfaces of sealed bearings are lightly coated with the same grease for corrosion resistance. Additional lubricants are also available. Your RC Sales Engineer can help select the appropriate lubricant for special applications. Temperature Standard RC Thin Section earings can operate at temperatures from -6 F to 20 F. Temperatures up to 0 F can be reached if the bearings are temperature stabilized. y the use of special materials RC can provide bearings for operation to 900 F. Contact your RC Sales Engineer for recommendations on bearings operating above 20 F. The limiting speed of a bearing is dependent upon a number of different factors including bearing size, bearing type, ball separator design, lubrication and loading. The limiting speeds for the bearings shown in this catalog are determined using the following: N = 1000 * k E with N = + E = (earing Pitch iameter) 2 k = constant, see table below k Value earing Type Load Condition Grease Oil C or A or X X, Combined &, or UPLEX PAIRS AN AXIAL PRELOAING uplex Pairs uplex bearings are a pair of angular contact RC Thin Section earings specially ground for use as a matched set. A duplexed pair can be used to provide accurate shaft location, to increase capacity or to increase stiffness of the bearing assembly. A duplex pair of RC Thin Section earings is ground so that when mounted using recommended fits, there will be no internal clearance in the bearings. There are three basic mounting methods to accommodate different loading requirements: ack-to-ack (), -Type Face-to-Face (F), F-Type Tandem (T), T-Type ack-to-ack, -Type Heavy radial loads Combined thrust & radial loads Reversing thrust load Excellent rigidity loads Heavy radial loads Combined thrust & radial loads Reversing thrust load loads High one-direction thrust loads Minimum axial shaft deflection Heavy radial loads Axial Preloading Tandem, T T-Type Standard duplex bearings are ground so that there will be a light axial preload induced on the bearing at nominal conditions. In some applications increased bearing stiffness may be required. In these cases the duplex grinding can be done such that a heavier axial load is induced in the mounted bearing. This load can be increased or decreased to meet the requirements of a particular application. Consult your RC Sales Engineer for special requirements. hen there is negative radial play (diametral preload) there is interference rather than clearance between the balls and the races. As the interference increases, the friction, stiffness and torque also increase. RC Thin Section earings can be manufactured with customer specified diametral preload or clearance. Consult your RC Sales Engineer for design assistance. and Axial Runout runout of RC Thin Section earings is a measurement of the thickness variation of the bearing rings. The outer ring is measured from the ball path to the outer diameter of the ring, the inner ring is measured from the ball path to the bore. runout is defined as the wall thickness variation of the rotating ring. Axial runout is measured from the ball path to the face of the bearing rings. The variation in thickness measured is the axial runout. TOLERANCES Precision Grades RC Thin Section earings are available in four precision grades. RC Precision classes 0,, and 6 correspond to AMA AEC grades 1F, F, F and 7F respectively. The tolerances for the bearing bores, outer diameters, radial runouts, axial runouts and radial plays are shown in the Tolerance Tables on pages 108 through 110. Shaft and Housing Fits Proper shaft and housing fits are critical to the successful operation of a thin section ball bearing. The internal clearance of the bearing will be reduced proportionally by an interference fit. In addition, the roundness of the shaft and housing will directly affect the roundness of the inner and outer ring raceways. For most applications the inner ring is rotating and the load is stationary with respect to the outer ring. In this circumstance a light press fit onto the shaft is recommended. The recommended shaft and housing fits are shown in the Tolerance Tables on pages 108 through ENGINEERING ATA

67 MOUNTING ARRANGEMENTS hen selecting a mounting arrangement for RC Thin Section earings, you must first consider the loading condition. A duplex pair of angular contact bearings may be used for combined loading, moment loading, or heavy thrust loading. Combination A and C-Type, A and X-Type, or C and X-Type bearings are common mounting arrangements. Two X-Type bearings should never be mounted on the same shaft. There may be many different bearing arrangements for carrying the same load, some typical mounting arrangements are shown below. Reversing Loads The duplex pair of A-Type bearings offers several configurations. For reversing loads, either ack-to-ack, -Type, or Face-to-Face, F-Type, should be used. The F-Type mounting method demonstrates reversing thrust load. Combined radial and thrust loads are shown on the -Type configuration. oth of these methods can be used for heavy radial loads, combined thrust and radial loads, or moment loads. Heavy Combined Loading For heavy combined loading other special mounting arrangements may be employed. As shown in the top drawing, a duplex pair of A-Type bearings can be used with a floating C-Type bearing. In this configuration the A-Type bearings will carry the thrust load and part of the radial load while the C-Type carries only radial load. An X-Type bearing can replace the duplex pair of A-Type bearings to carry lower thrust loads as shown in the second drawing. Heavy Combined Loading or Loading Alternate mountings for heavy combined loading or moment loading are shown below. A duplex pair of -Type bearings resists high thrust, radial and moment loads. An X-Type bearing may replace the duplex pair in less heavily loaded applications for weight, space and cost savings. Load Shim Here for Proper Axial Preload Load Load Load Reversing Load Load F-Type Configuration -Type Configuration Load Load Load Load Heavy Loads Reversing Load The C-Type bearing is designed primarily for heavy radial loads. Two bearings can be installed on the same shaft as shown. y axially fixing one bearing and allowing the other to float, this configuration allows differential expansion between the housing and shaft, such as caused by temperature difference, without adding axial stress to the bearings. Although the C-Type bearing is designed for radial loads, they can withstand moderate thrust, moment and reversing loads. Shim Here for Proper Axial Preload -Type Configuration Single earing X-Type Configuration ENGINEERING ATA 12 1

68 CUSTOM FEATURES RC manufactures many custom bearings designed to optimize bearing performance for specific applications. Special features include changes in radial play, lubricants, materials, preloading and design. Contact your RC Sales Engineer for your custom bearing needs. Challenge us: There are many design options available to solve difficult application problems. Materials The standard bearings shown in the catalog have SAE 2100 steel rings and balls. RC Thin Section earings can be manufactured from other specialty bearing steels to provide corrosion resistance, high temperature capability, alternative load capacity or chemical compatibility. Rings. RC has manufactured thin section ball bearings from SAE 0C stainless steel to provide corrosion resistance. As an alternative to stainless steel rings, the entire surface of the rings can be coated with nodular thin dense chrome (TC). This coating, which meets AMS 28, achieves a molecular bond that will not flake, peel or separate from the base material. The TC coat has a hardness of HRC and can withstand temperatures well beyond the range of the base material. Special RC Thin Section earings have been manufactured from Aluminum, 00 Series Stainless Steel, 17- Stainless Steel, and other metals. Play The radial play (diametral clearance) of a thin section ball bearing will need to be predetermined if mounting fits other than those recommended are used. Special radial play may be required for a temperature differential across the bearing, for housing and shaft materials that have different coefficients of thermal expansion, or to change operating characteristics of the bearing. preloaded bearings are measured to meet bore and O.. tolerances prior to preload. Preloading of uplex earings Standard duplex bearings are ground so that there will be a light axial preload induced on the bearing at nominal conditions. In some applications increased bearing stiffness may be required. In these cases the duplex grinding can be done such that a heavier axial load is induced in the mounted bearing. This load can be increased or decreased to meet the requirements of a particular application. Consult your RC Sales Engineer for special requirements. Mounting Features Mounting features, such as flanges, anti-rotation tabs and mounting holes can be incorporated on the inner and outer rings. Mating parts, such as gears and housings, may be integrated into the bearing rings for improved performance and cost. Separators Standard RC Thin Section earings, KA through KG and JU series, are manufactured with brass or nylon separators. The KAA series contains nylon separators. The A-Type bearings contain one piece circular pocket separators, while the C- and X-Types have snap-over separators. The four basic separator materials are brass, nylon, phenolic and stainless steel. The graph below schematically illustrates the effects of cage design and material on bearing performance. For example, the one piece circular pocket design may reach roughly two times the speed of the snap-over design. Likewise, a brass separator design will generate more torque and withstand higher temperatures than a phenolic separator. Exact speed limits depend on bearing size, bearing type, lubrication and loading. Specific material advantages and limitations are illustrated below. For assistance in selecting the appropriate separator for special applications, contact your RC Sales Engineer. s. Some special ball materials available include 0C Stainless Steel, 00 Series Stainless Steel, Silicon Nitride and M-0 Steel. Lubrication Many different lubricants are available from RC for special applications. Greases which are designed specifically for high speed, low torque, water resistance, high temperature, oscillatory motion and food machinery can be provided. Additional lubricants, such as dry film, are suitable for use in vacuums and space applications. Sealing Standard seals for thin section ball bearings are molded from elastomers. Polytetraflouroethylene (PTFE) seals, fiber glass reinforced PTFE seals, stainless steel shields and many other options are available for low torque and other special applications. ENGINEERING ATA 1 1

69 Thin section ball bearings are generally used in applications with space, weight, and load con straints. Some typical ap - pli ca tions for standard RC Thin Section earings include: Medical Equipment Machine Tools Radar Equipment Textile Machinery Material Handling Satellite Systems Antenna Pedestals Packaging Ma chin ery Aerospace Scanning Equip ment Optical Equipment Semi-Conductor Rotary Joints Manufacturing Equipment Military Turrets Slip Ring Assemblies Robotics Harmonic rives Reducers TYPICAL APPLICATIONS Paper Making Machine A pair of radial contact RC Thin Section earings is the ideal choice for applications with severe space con - straints and significant loads. In addition to the standard RC Thin Section earings, RC will also manufacture specially designed bear ings for specific ap pli ca tions. RC Sales Engineers and Cus tom er Service Rep re sen ta tives are avail able for con sul tation. CUSTOM EARINGS Continuous Rotating Machine Tool Table Machine Tool Indexing Table Rotary Table Using a -point contact RC Thin Section earing pro vides stiff ness for accurate positioning as well as car ry ing multiple loads. RC supplied this assembly as shown. Running at slow speeds with com bined load carrying ca pa bil i ties and minimal space determined the use of this -point RC Thin Section earing. RC supplied this assembly as shown. Using a -point contact bearing provides high stiffness with minimum deflection resulting in a streamlined and light weight design. Rotating Polishing Table Ø in. irect rive Assembly A duplex pair of angular contact RC Thin Section earings provide the optimal load carrying capabilities in a compact design. To provide necessary stiffness with a more compact, lighter weight machine design, use the -point contact RC Thin Section earing in. 16 Lightweight Airborne Electro-Optical Imaging Equip ment This application requires bear ings with combined load car ry ing capabilities and minimal added weight. A pair of an gu lar contact RC Thin Section earings pro vides high stiffness and multiple load carrying capabilities in a com pact, light - weight envelope. Rotary Joint y using a pair of angular con tact RC Thin Section earings, this de sign can carry radial, axial and mo ment loads. Aerial Camera Assembly Ø 8.70 in. For use in an aerial camera assembly, an extra-light, low torque bearing was required. y redesigning a standard RC Thin Section earing -point contact design, the overall as sem bly weight was lowered from 7 lbs. to.8 lbs. In addition to weight reduction, this design, also reduced the running torque below 1 in.-lbs. with the starting torque below 2 in.-lbs. Airborne Radar System A duplex pair of angular contact RC Thin Section earings was designed for an airborne radar system. This bearing application required combined load carrying ca pa bil i ties, low temperature compatibility, and relatively low torque. ifferent from a standard Thin Section, this duplex bearing was designed with one outer ring and two inner rings with a slight preload. This design provided low torque and multiple loading capabilities. 17 ENGINEERING ATA

70 .70 in. EXTREME ANGULAR ACCURACY EARINGS INTEGRAL EARING ASSEMLY in. Client Problem Client Problem integral gear Radar Antenna rive An RC Thin Section earing designed with a gear integrated with the inner ring, achieved both a sig nifi cant weight reduction and improved accuracy as well as sim plic - i ty of assembly. This bearing is used in a radar antenna drive which has limited space available for its support bearing. Coil springs were used as spacers be tween balls to lower bearing torque and further reduce weight..00 in. Integral Shields.00 in..996 in. Instrument Gimbal Assembly A preloaded duplex pair of angular contact RC Thin Section earings were designed to meet the low torque and corrosion resistant requirements in a combined load ap pli ca tion. e signed for an instrument gimbal assembly in a missile, the duplex pair of bearings are subjected to combined radial, axial and moment loads. These special RC Thin Section earings have a light preload and were man u fac tured with integral shields as part of the rings..00 in. Aircraft Gun Turret A bearing was required which would take radial, axial, and moment loading, to support an aircraft gun turret. It was desirable to have the bearing match the coefficient of ex pan sion of the aluminum with a split inner ring and special balls to absorb shock and vibration loading. This bearing performed at 2% of the torque of the steel bear ings previously used. Semiconductor Automated Test Equipment Semiconductor automated test equipment required an RC Thin Section earing to accurately position a table. In this ap pli ca tion the bearing oscillates to ±10, this bearing was designed as a -point contact bearing. To provide a set of bearings which maintain an extreme precise angular accuracy of the center line of the shaft to the housing. The angular accuracy requirement was a nonrepeatable error ( a) of one arc second, and a repeatable error (a) of three arc seconds. RC Recommendation earings should be made to the most precise geometric tolerances possible. The bearings should be preloaded to overcome the minor surface imperfections of the balls and raceways. They should also be part of a cartridge incorporating the housing and shaft. RC earing Solution earings were made as part of the cartridge assembly and all angular measurements for accuracy were made relative to the housing and shaft. earings were preloaded and spaced axially to help overcome geometric inaccuracies of the bearing. The bearing raceways and balls were made from Consumable Electrode Vacuum Melted AISI 0-C material. As the bearings had to operate in a vacuum, the separator material necessitated a special open weave phenolic material impregnated with a special silicone oil. To prevent migration of the oil from the cartridge assembly, the labyrinth seal was coated with a barrier film. Save space and weight in an application involving a power take-off drive from a high speed gearbox. RC Recommendation Make the races of the bearing integral with the housing and possibly with the gear shaft. RC earing Solution The bearing housing was designed to incorporate the outer raceway of the roller bearing and the outer raceway of the split inner race ball bearing. In order to increase the reliability of the rolling contact surfaces in the housing, the housing was manufactured from AISI M-0 material Consumable Electrode Vacuum Melted. The gear was made integral with the shaft which also contained the inner raceway of the roller bearing. The gear shaft was manufactured from Consumable Electrode Vacuum Melted AISI- 910 material; case hardened to Rc 61-6 on the gear tooth surface and in the roller bearing raceway. In order to facilitate lubrication of the bearings in the restricted area, lubrication holes were drilled through the housing into the space between the two bearings. The lubrication was fed through these holes from an annular groove in the housing. The two halves of the split inner race were retained to the gear shaft by the use of a lock nut, clamping the races axially. The combined integral assembly of bearings, gear shaft and housing provided the desired space and weight reduction and gained improved operational accuracy. In addition, it afforded easier installation into the gearbox in. IA. PTFE Torroids ore IA in. Vacuum Operation earing requirements included minimal radial runout, low torque, corrosion resistance, combined load capabilities and vacuum operation capabilities. Special designed duplex stain less steel angular contact RC Thin Section earings, provided the capabilities re quired. Airborne Turret Azimuth A low torque, high stiffness, multiple load capacity, corrosion resistant bearing was required for an airborne turret azimuth drive as sem bly. For this application a duplexed pair of angular contact RC Thin Section earings was designed with toroid separators and stainless steel rings. This design maintained low torque, but still allowed multiple load carrying capabilities. IA For more information visit our web site at rbcbearings.com 1 ENGINEERING ATA

71 Client Problem THIN SECTION GEARE EARING A radar antenna drive had only limited space available for its support bearings. RC Recommendation Use a thin section rather than a standard section radial ball bearing, thus achieving a significant weight reduction. Incorporate a gear as part of the inner ring to obtain improved accuracy and simplify the assembly. RC earing Solution The thin section bearing utilizes coil springs as spacers between the balls instead of a conventional separator to further reduce weight and lower bearing torque. The inner race of the bearing was extended and the gear was cut on this extended portion of the inner race. The incorporation of the gear into the inner race eliminated the necessity of a shaft clamping mechanism, etc., which would be required if the gear were separate from the bearing. Integrating the gear profile into the inner race increased the accuracy of the gear to bearing concentricity. The bearing was manufactured of the following materials: the balls and outer race are from AISI-0-material; the inner race manufactured from AIS material, carburized and hardened in the raceway area to Rc ROLLER, THRUST AN ANGULAR CONTACT ALL EARING Client Problem Cost reduction of an existing hydraulic pump swash plate assembly. RC Recommendation Utilize an integral bearing assembly which combines a roller thrust bearing and an angular contact ball bearing. RC earing Solution The original swash plate design in the hydraulic pump utilized a roller thrust bearing to handle the thrust load and a separate angular contact radial ball bearing to handle radial loads; and radially locate the swash plate assembly. The usage of two separate bearings required complex machining of the housing and swash plate with close control of tolerances, to eliminate excessive radial eccentricity of the swash plate assembly. In the original design, which utilized two separate bearings, it was necessary to mount the bearings axially adjacent to each other. The recommended bearing design decreased the axial space required for bearings, resulting in a size and weight savings. A combined bearing assembly is usually lower in cost than two separate bearings. The technique of integrating two bearings usually simplifies an assembly where two bearings had been utilized, or where problems have arisen relative to running accuracy, overall size or weight. SELF-ALIGNING EARING OPERATING IN LIQUI POLYETHYLENE Client Problem A rolling contact bearing was required on a vertical shaft which rotated in a catalytic-polyethylene autoclave. lind assembly of the bearing and shaft which weighed approximately 10,000 pounds was necessary, due to the autoclave design. RC Recommendation Use radial ball bearing incorporating a self-aligning raceway made from corrosion resistant materials. The bearings should be capable of withstanding operating temperatures as high as F, and capable of operating with liquid polyethylene as the lubricant. RC earing Solution The bearing was manufactured from AISI-0-C material, specially heat treated to resist softening at the high operating temperatures. The separator material was L-60 cobalt alloy which offered the necessary wear resistance. To solve the client s problem of inserting the eighteen foot long assembly into a blind housing, a large lead-in chamfer was formed on the outside of the bearing. This lead-in chamfer provided for easy insertion of the bearing into the housing. The previous bearing installation did not allow any shaft misalignment, resulting in bent shafts which were then unacceptable for further use. The self-aligning feature of the outer raceway permitted the bearing to misalign while rotating, allowing for shaft distortion as the shaft went through critical speeds. Client Problem SENAL EARING A fluidic gyroscope required a gimballing, self-aligning bearing which would rotate at high speed. The bore of the bearing was to form part of the fluidic metering and sensing system. RC Recommendation Use a double row, self-aligning spherical ball bearing with spherical outer and inner raceways. The two rows of balls should be preloaded to obtain the running accuracy needed for the fluidic metering system in the bore of the bearing. RC earing Solution The double row spherical self-aligning ball bearing was designed with a removable portion of the spherical outer raceway to allow for preloading of the two rows of balls. ith the possibility of different rotational speeds of the two rows of balls, each row of balls had its own separator. To guide the separators, a special configuration was machined on the outside of the separator to allow for each separator to be guided at two points of contact with the spherical outer raceway. The fluidic metering portion was made as a separate unit, press fitted into the bore of the bearing. IA IA For more information visit our web site at rbcbearings.com For more information visit our web site at rbcbearings.com TYPICAL APPLICATIONS 10 11

72 1200 F OSCILLATING EARING GEAROX EARINGS ITH SELF LURICATING SEPARATORS HIGH TEMPERATURE, ACTUATOR THRUST EARINGS NON-MAGNETIC EARING Client Problem Client Problem Client Problem Client Problem A high temperature rolling contact, oscillating bearing for operation at 1200 F, subjected to high vibration loads. RC Recommendation esign a rolling contact bearing with radial preload to overcome false brinelling which may occur in the high vibration environment. earings should be made from a corrosion resistant, high-temperature alloy. RC earing Solution The bearing was manufactured of Stellite 6 material which was cold worked by an RC proprietary process to obtain a hardness of Rockwell C- minimum in the raceway areas. The balls of this bearing were made from L-60 cobalt alloy. The bearing was of full complement design with a filling slot for insertion of the balls, and negative radial clearance of line to line to.000" tight. The lubricating film which is generated by the cobalt alloy races and balls permitted this bearing to operate without any additional lubricant. The increased hardness of the raceways to Rockwell C- minimum produced a bearing which was capable of operating up to 1200 F with extreme wear resistance. earings were needed for operation in high-temperature gearboxes at 600 F to F. Conventional lubrication such as oil was not available, therefore the bearings would have to be self-lubricating. RC Recommendation Use bearings of high-temperature, heat treated AISI-0-C material. Incorporate in these bearings RC developed proprietary graphitic carbon separators, to act as the bearing lubricant. RC earing Solution Angular contact ball bearings were designed, utilizing an inner land guided separator of graphitic carbon material. The separator was reinforced on its outside diameter with a metallic shroud to withstand the centrifugal forces from high operating speeds and resist fracturing, which could result from the tremendous acceleration rate of the bearing rotation. To facilitate a break-in period required for transfer of the self-lubricating material from the graphitic carbon separator to the rolling contact surfaces, the balls and raceways were coated with an impinged, tungstendisulfide dry-film lubricant of approximately " in thickness. ith the dry film lubricant on the raceways and balls, the bearings were capable of operating at the required speed without any break-in period normally required for bearings incorporating dry, self-lubricating separators. A high temperature thrust bearing was needed to support the reactive thrust of a ball screw actuator. earings had to be capable of operating at approximately 80 F. RC Recommendation Use bearings of high temperature tool steel to withstand the applied loads at the high operating temperature. RC earing Solution earings were manufactured from CEVM M-2 tool steel with a full complement of sixteen.187 diameter tungsten carbide balls. The bearing was designed having a contact angle of 60 to handle the high thrust load and some radial loading. The races were coated with a proprietary dry-film lubricant applied to the raceways of the bearings prior to installation of the bearing in the application. The significant design feature which allows the bearings to operate at 80 F and at speeds up to 70 RPM without excessive wear is the combination of the tungsten carbide balls running against the M-2 tool steel raceways. Similar designs using M-2 tool steel balls had worn very rapidly at relatively short periods of application at the operating temperatures. IA A newly designed rotating magnetometer for ore analysis required a non-magnetic bearing. RC Recommendation Use a bearing with the raceways and balls made of a material which would be capable of operating under the loads and possess the lowest magnetic permeability. The loading combined thrust, radial and moment loads which required a duplex pair of bearings. RC earing Solution Manufactured the bearing from erylco 2 material. This material was used for the inner and outer races, balls and shields. The separator was manufactured of a phenolic material. The bearing was designed as a common outer duplex pair, lightly preloaded. To reduce contamination possibility, shields were incorporated. The bearing was lubricated by grease plating the raceways with MIL-PRF-28 lubricant. IA For more information visit our web site at rbcbearings.com For more information visit our web site at rbcbearings.com TYPICAL APPLICATIONS 12Stellite is a registered trademark of the eloro Stellite Company, Inc. 1

73 100 F SELF-ALIGNING ALL EARING SPHERICAL, METAL-TO-METAL EARINGS FOO PROCESSING EQUIPMENT EARINGS CHEMICAL PROCESSING EQUIPMENT EARINGS Client Problem Client Problem Client Problem Client Problem A hinge bearing on the exhaust ducts of a jet engine used to propel and lift a ground effect vehicle machine. RC Recommendation Use a double row angular contact ball bearing in a self-aligning housing. earing materials to be made of corrosion and heat resistant material. RC earing Solution The double row ball bearing cartridge unit utilizes L-60 material for the raceway and balls. The bearing was mounted in a self-contained spherical housing to compensate for misalignment of the shaft during operation, which occurs due to temperature differentials between the frame and the exhaust nozzles. The races were made by a special RC developed proprietary race hardening technique. ith this technique the L-60 cobalt alloy material is work hardened and then heat treated to a Rockwell C- minimum. A manufacturer of commercial aircraft required a landing gear support trunion bearing. earing must have low radial and axial clearances. RC Recommendation Use a metal-to-metal spherical plain bearing. It should have a dry film lubricant on its spherical bearing surfaces. The bearing should be fabricated from corrosion resistant material. RC earing Solution ith the clearances required,.0010/.000 radial and.009 max. axial, assembly of match ground components was necessary. Swaging a bearing of this size would not result in reliable clearance control. The outer race was assembled to the ball by deforming it under radial pressure to an elliptical shape to allow the insertion of the ball. Once the ball is inserted, the pressure is removed from the outer race, allowing it to return to its original shape. IA Relatively short life was obtained on bearings made of 16 stainless steel in food processing equipment. 16 stainless steel was required to prevent contamination of the food products. RC Recommendation Use a harder, more wear resistant material which would still be resistant to the corrosive fluids of the processed food and prevent contamination. RC earing Solution A search of various materials which were resistant to the food products handled by this particular piece of equipment brought to light that certain cobalt alloys could be used without any fear of contamination or corrosion. In order to increase the wear resistance of the cobalt alloys, they were cold worked in the raceways to increase the hardness and thereby increase the wear resistance. The alloy used for the raceways and the balls was L-60. Separator material was 17- PH. earings exposed to photographic-processing chemical solutions were failing. earings being used were made of AISI-0-C material, sealed, and grease lubricated. RC Recommendation Use a bearing of a different alloy; make the separator selflubricating and run the bearing in the chemical solutions. RC earing Solution The bearing used cobalt alloy balls and races and a selflubricating separator of Fiberglass reinforced TFE. To give additional strength to the riveted separator in this bearing, side plates of 00 series stainless steel were added to the separator. The bearing operated for 0 hours with 100 F exhaust gas passing through the bearing without any significant wear. IA IA For more information visit our web site at rbcbearings.com For more information visit our web site at rbcbearings.com TYPICAL APPLICATIONS 1 1

74 CRYOGENIC EARINGS SELF-LURICATING MAIN SHAFT EARING NUCLEAR REACTOR EARING ALL EARINGS FOR VACUUM OPERATION Client Problem Client Problem Client Problem Client Problem High speed ball and roller bearings for use in cryogenic equipment. earings should also operate in cryogenic liquid or gaseous environment. RC Recommendation Use bearings of a corrosion resistant material such as AISI-0-C and incorporate a self-lubricating material for the separators. RC earing Solution and roller bearings of AEC- tolerance grade were made of AISI-0-C material, with special sub-zero treatment in liquid nitrogen. This sub-zero treatment gave the bearings the dimensional stability necessary for operating in cryogenic equipment. The bearing separators were made of Teflon reinforced Fiberglass. This basic bearing design criterion has been used in almost all liquid hydrogen and oxygen turbo pumps used in present day rocket engines. Mainshaft bearing for a vertical lift engine. For weight reduction, the bearing should be self-lubricating to eliminate a portion of the engine lubricating system. of the 8mm bore bearing was 16,000 RPM. The bearing, located in turbine end of the jet engine, accommodates axial shaft expansion. RC Recommendation Use a ball bearing with races and balls made from wearresistant materials. Lubricate the bearing with a shrouded self-lubricating graphite separator. Make the inner race cylindrical to accommodate the axial shaft expansion. RC earing Solution earing was manufactured from CEVM AISI-M0 material for the races and balls. The separator of shrouded graphite was outer land guided on two graphite rings, pressed into the outer race ring. To prevent damage to the graphite while inserting the shaft into the bearing, a side plate was added which prevented any accidental contact of the shaft with the graphite separator. To allow for the excess graphite to purge from the bearing, holes were put in the protective side plate. earing to accommodate the thrust load in a control rod drive mechanism. earing is lubricated with chemically pure water, de-ionized and de-oxygenated. RC Recommendation Use a double row ball bearing, tandem ground for thrust sharing to obtain the life required. ecause radial support of the inner race is marginal, the inner race for both rows should be ground on the same ring. RC earing Solution The double row ball bearing was made of cobalt alloy materials, the separator of 17- PH. To obtain the maximum capacity in this double gothic arch thrust bearing, the outer races are split, permitting the maximum quantity of balls in each row. sharing of two rows is accomplished by accurate match grinding of the spacer ring to fit the gap between the outer races, and by matching the contact angle in both rows equal within two degrees. A high speed ball bearing, to run at temperatures up to 1000 F RC Recommendation Use bearing of wear resistant, high temperature tool steel. earing lubricant should be dry and not sublimate. RC earing Solution The bearings were made of T- tool steel which has high hardness and wear resistance at 1000 F. The bearings contain a full complement of balls and no separator. The lubricant was an ultra-thin layer of silver deposited on the balls. The bearings were manufactured without any snap which may abrade the silver on the balls. Teflon is a registered trademark of upont. For more information visit our web site at rbcbearings.com For more information visit our web site at rbcbearings.com TYPICAL APPLICATIONS 16 17

75 TURO-MACHINERY ROLLER EARING RUSA EARING ATER-LURICATE EARINGS OPTICAL PRECISION EARINGS Client Problem Client Problem Client Problem Client Problem A high speed mainshaft roller bearing was failing due to skidding. Insufficient load on the bearing was the cause of skidding. RC Recommendation Use a pre-loaded roller bearing to overcome the skidding problem. RC earing Solution The roller bearing was designed with hollow rollers which provided a radial internal preload between the inner and outer races. The bearing has an inner land guided separator. The viscous drag between the separator and the inner race land diameter promotes the rotation of the separator. To provide for cooling the inner race, under race cooling grooves were located in the bore of the inner race. A large diameter bearing to support a platform. The platform and portion of the bearing operate in an anisotropic quantum electrodynamic field, while in a vacuum. RC Recommendation A -point contact pre-loaded ball bearing. Provide means for heat addition or removal to maintain the desired preload. Temperature variations occur due to the field; the outer ring normally has a higher temperature than the inner ring. RC earing Solution A split outer race, full-complement ball bearing to be made of Cobenium rings, and sodium filled Cobenium balls. The raceways and balls were gold plated. The gold is the lubricant. The inner ring of the bearing contains heating or cooling chambers. These are formed by electron beam welding the annular members to the ring. The fluid flowing through the chambers is controlled relative to rate of flow and temperature, depending upon the specific race area temperature serviced by that chamber. This permits control of the geometric configuration of the inner race and preload. Long-life, wear-resistant bearings for running in water. RC Recommendation Use bearings of cobalt alloys for maximum corrosion and wear resistance. esign the bearing with race curvatures and clearances to compensate for the lack of lubricity of the water. RC earing Solution earing rings were made of L-60 cobalt alloy. An RC developed cold working technique was used to increase the hardness of the alloy to Rc minimum after heat treatment, for increased wear resistance. Normal cold worked and heat treated hardness of this alloy is Rc 7. The separators in the bearings were made from 17- PH corrosion resistant material, heat treated to increase wear resistance. IA IA Support a 1" diameter rotating tube which contained lenses. Minimal radial runout was required to prevent distortion of the image by the lenses. earings should be low in torque and corrosion resistant, pre-lubricated, suitable for a vacuum operation. RC Recommendation The rotating tube should be supported with duplex pairs of bearings, mounted, preloaded, with minimal lubrication of a low vapor pressure lubricant. RC earing Solution uplex pair of bearings, pre-loaded, were manufactured of passivated AISI-0-C corrosion resistant steel. The radial and axial runouts were held to the following: radial runout, inner,.0002 T.I.R.; outer,.000 T.I.R.; axial runout, inner,.0002 T.I.R.; outer,.000 T.I.R. The separator consisted of TFE rings around alternate balls for low starting and running torque. earings were lubricated with a special lubricant and then centrifuged at 100 g s for 10 minutes to remove the excess oil. The sodium filled balls are used for heat transfer between the rings. For more information visit our web site at rbcbearings.com For more information visit our web site at rbcbearings.com TYPICAL APPLICATIONS 18 19

76 CAMERA MOUNT EARING Client Problem A lightweight, low torque bearing for use in an aerial camera assembly. RC Recommendation Use a bearing with rings made of aluminum, and hard anodize the raceway areas. RC earing Solution The original steel bearing design which was a double row angular contact ball bearing in an aluminum housing was replaced with a single row, point contact bearing, with the rings manufactured of 707-T-6 aluminum. The raceways of both rings were hard anodized and ground after hard anodizing. s were of passivated AISI-0-C. This construction utilizing the aluminum material, reduced the overall weight of the bearing assembly from over 7 lbs. in the original design to.8 lbs. in the finished unit. In order to obtain a low running and starting torque, alternate balls in the raceway were surrounded with TFE separator and the raceways were grease-plated. The bearing running torque was below 1 inch lbs. with the starting torque being below 2 inch lbs. Client Problem TURO-MACHINERY ALL EARING A ball bearing running at 2.2 miilion N*, with no load, was failing due to the fatigue of the outer race, and ball skidding. Fatigue failures had been occurring due to the large number of stress cycles, caused solely by the centrifugal force of the balls. RC Recommendation Reduce the number of balls in the bearing, thereby reducing the number of stress cycles on the outer race. Make the separator a lightweight steel design. Reduction of the separator and ball mass would reduce the inertial resistance, thereby reducing skidding. Change material from AISI-2100 to a tool steel to increase resistance to skid damage. RC earing Solution earing races and balls were made from CEVM AISI-M0 tool steel. The separator was manufactured from AISI-0 material, hardened to Rc 26-2 and silver plated. The number of balls was reduced from twenty to eight balls, reducing the number of stress cycles by sixty percent. The separator configuration permitted an increase of lubricant flow through the bearing for cooling and lubrication. *N =, bearing bore in (mm) - N, shaft speed in. THIN SECTION ALL EARING ENGINEERING ATA Thin Section Availability Chart LOA CONITION earing Reversing Combined Type Contact Axial Axial - A Angul ar Good Excel l ent o Not Use o Not Use Good C Radi al Excel l ent Good Good Good Good X - Poi nt Fai r Good Excel l ent Excel l ent Fai r * * Seal ed bear i ngss ear i ngs i n st ock ear i ngs wi t h l i mi t ed avai l abi l i t y Al l ot her bear i ngs check avai l abi l i t y For more information visit our web site at rbcbearings.com TYPICAL APPLICATIONS 10 1

77 NOTES ENGINEERING APPLICATION ATA FAST FAX 12 For assistance in selecting the correct bearings for your design, complete this form and fax or mail it to: RC earings 00 Sullivan ay, P.O. ox 770 est Trenton, NJ FAX: Company Name: Street Address: City: Name: Phone: escription of application: : Rotational rpm n Inner Ring Rotating Oscillatory cpm n Outer Ring Rotating Temperature: Average running Loading: min n Shock n Vibration n Safety factor (Please specify) radial Lbs./N n Stationary Load n Rotating Load thrust Lbs./N moment Ft. Lbs./N.m n Stationary Load n Rotating Load (show application of load on sketch) radial thrust moment Life: Lubricant: Lbs./N Lbs./N Ft. Lbs./N.m (show application of load on sketch) n Grease n Oil n Special (Please specify) Size limitations: Max. O inches/mm Min. bore inches/mm Max. idth inches/mm Other data: n Seals n Shields n Special (Please specify) Housing material: Fax: Further description of application and/or special requirements: State: Title: Shaft material: ate: Zip: max n Sketch included (continue on second sheet if necessary) 1 AVAILAILITY CHART ATA FAX

78 Innovation. Commitment. Quality. RC has been producing bearings in the USA since In addition to unique custom bearings, RC offers a full line of standard industrial and aerospace bearings, including: Spherical Plain earings, angular contact, extended inner ring, high misalignment. QuadLube, ImpactTuff, SpreadLock Seal, CrossLube, uralube, and selflubricating bearings. Available in inch and metric sizes. Thin Section earings Standard cross sections to one inch. Sizes to 0 inches. Stainless steel and other materials are available. Seals are available on all sizes and standard cross sections. Super duplex configurations. Tapered Roller earings Tyson case-hardened and throughhardened tapered roller bearings. Available in many sizes. Used in Class 8 heavy truck and trailer wheel bearings, gearboxes, and final drive transmissions. Tapered Roller earings Case-hardened. Sealed and unsealed for truck, tractor, and construction equipment steer axles, and Class 8 trailer landing gear. Integrated Assemblies For robots and other process tool applications. Engineering design assistance. Production volume capacity. Cam Followers Standard stud, heavy stud, yoke type, caged roller followers. Patented RC Roller cylindrical roller cam followers, HexLube universal cam followers, airframe track rollers. Needle Roller earings Pitchlign caged heavy duty needle roller bearings, inner rings, TJ TandemRoller bearings for long life. Self-Lubricating earings, thrust, rod ends, spherical bearings, high temperature, high loads. Available in inch and metric sizes. Fiberglide self-lubricating bearings. Airframe Control earings bearing types, self-lubricating types, needle roller track rollers. owel Pins, Loose Needle Rollers, Shafts Precision Products dowel pins, loose needle rollers, and shafts. Commercial Rod Ends Commercial and industrial, precision, Mil-Spec series, self-lubricating, and aircraft. Sold under the Heim, Unibal, and Spherco names. Available in inch and metric sizes. earings Precision ground, semiground, unground. High loads, long life, smooth operation. Nice branded products are offered in caged and full complement configurations. Specials RC manufactures many specialty bearings for the aerospace, oil and energy, semiconductor equipment, packaging, transportation, and other industries. Authorized RC istributor This document contains a general overview of the products and features described herein. It is solely for informational purposes, does not represent a warranty of the information contained herein, and is not to be construed as an offer to sell or a solicitation to buy. Contact RC earings for detailed information suitable to your specific applications. RC earings reserves the right to modify its products and related product information at any time without prior notice. Some of the products listed herein may be covered by one or more issued and pending U.S. or foreign patents. Contact RC earings for product specific information. 2006, 2007, 2008 RC earings Incorporated. All rights reserved. RC 02/11 1