PCT/IB2015/ SOLUTIONS WITH A DIFFERENCE BLAST HOLE LINER

Transcription

1 PCT/IB2015/ SOLUTIONS WITH A DIFFERENCE BLAST HOLE LINER

2 INDEX PENHINE PRODUCTS THE PENHINE BLAST HOLE LINER The Penhine Blast Hole Liner 1 Safe Working Procedure for Inserting the Penhine Blast Hole Liner 2 The Penhine Blast Hole Liner Site Test Trail 3 Step by Step Procedure for Inserting the Penhine Blast Hole Liner 4 Results Gallery 6 Distributors 7 F R AG M E N TATI O N

3 P E N H I N E BLAST HOLE LINER 1

4 THE PENHINE BLAST HOLE LINER Designed to provide quick, hassle free lining of blast holes on the go. Blast Hole Liners are securely packaged in convenient size packs which can be easily transported on site. Dispensing of liners down blast holes takes place speedily and effectively. Durable polyethylene material is abrasion resistant and watertight. Unique packaging method allows for efficient insertion of liner into blast hole without the risk of tangling or twisting. Liner unravels to take the form of the blast hole as it fills with emulsion. Prevents loss of emulsion into cracks and voids. Eliminates the need for costly adjustments to emulsion formulations in wet holes. Can be used with emulsion and ANFO. Allows for consistency of charge volume in blast hole. Improves productivity and ensures overall improvement in effectiveness of blasting. SAFE WORKING PROCEDURE FOR INSERTING THE PENHINE BLAST HOLE LINER 1. Select correct size liner for hole diameter. 2. Using scoop provided, fill tail compartment with dirt / soil / gravel. 3. When filled, pull cable tie closed securely. 4. Using spike on side of scoop, pierce corner of top end of bag. 5. Extract approximately 600mm of sleeve from open end of bag. 6. Hold firmly on to sleeve. 7. Drop bag down hole whilst holding firmly on to end of sleeve. 8. Fold end of sleeve and feed through hole in lid. 9. Place lid securely over open hole. Terms & Conditions Apply Copyright Penhine 2017 PCT/IB2015/

5 THE PENHINE BLAST HOLE LINER SITE TEST TRAIL Please see the below extract from a site test trial report conducted in Zambia recently: Today we trialled the blast hole 165mm sleeves in west 12. It was set in the manner of a time trial, to see if the mine would save time with our new easy to use packaging. At the same time we were looking for any other advantages it would bring. The trial was done using 36 holes on the old product and 36 holes of the Penhine Blast Hole Liner new product. The results were as follows: Old Blast Sleeve AVG Hole time 56 seconds 35 seconds 36 Hole Total Time 34 min min New Penhine Blast Hole Liners 150 Holes Total Time 2hr 21 min 66s 1hr 29min 59s The few advantages that were noticeable: 1. The Penhine Blast Hole Liner bag has a separate compartment for the weight, so if it does get damaged on the way down, emulsion will not escape when pumped. 2. There was less twisting in the plastic, should allow for easier placement of the booster. 3. The packaging is advantageous, as the labour does not need to carry a large roll to each hole. 4. Less fatigue as a result of the above. Also no strain on the persons back.(which the gents were complaining about). 5. A much faster placement time. Terms & Conditions Apply Copyright Penhine 2017 PCT/IB2015/

6 STEP BY STEP PROCEDURE FOR INSERTING THE PENHINE BLAST HOLE LINER STEP 1 STEP 2 STEP 3 Select correct product for hole depth and diameter. Using scoop provided, collect soil / gravel / dirt. Fill tail compartment with contents of scoop. STEP 4 STEP 5 STEP 6 When tail is filled, locate the cable tie. Pull the cable tie until it is closed. Using spike in scoop, pierce corner of bag, and tear open. Terms & Conditions Apply Copyright Penhine 2017 PCT/IB2015/

7 STEP BY STEP PROCEDURE FOR INSERTING THE PENHINE BLAST HOLE LINER STEP 7 STEP 8 STEP 9 Extract approx. 600mm of sleeve from open end of bag. Hold firmly on to sleeve. Fold end of sleeve over and feed through hole in lid. (Lid Optional) STEP 10 While holding on to sleeve, lower bag down hole. Place lid securely over top of hole. (Lid Optional) Terms & Conditions Apply Copyright Penhine 2017 PCT/IB2015/

8

9 DISTRIBUTORS PENHINE (SOUTH AFRICA OFFICE) ULTIMATE INDUSTRIALS (DRC) Physical Address: 9A Chopin Street, Klarinet, Industrial Area Witbank, 1035, Mpumalanga (Province) South Africa Postal Address: PO Box 7789, Tasbet Park, Witbank, 1040 Mpumalanga (Province), South Africa Contact Details: Hein Fourie: Tel: +27 (0) Physical Address: No. 6A, Av. Luvungi, Q/ Carrefiur, C/ Kampemba, Lubumbashi Democratic Republic of Congo Contact Details: Pontien Mango (Sales Manager) Mobile: (+243) Doux Kasongo (Internal Sales) Tel : (+243) / dkalembwe@ultimate-industrials.com EUROPE Contact Person: Sami Uusitalo saverplug@gmail.com DYNAMIC RESOURCE SOLUTIONS (AUSTRALIA) Contact Person: Clayton Hitchcock Mobile: Physical Address: 34A Parkinson Lane, Kardinya, 6163, Australia Terms & Conditions Apply Copyright Penhine 2017 PCT/IB2015/054827

10 DISTRIBUTORS BORUME BLASTING SERVICES (TANZANIA AND MOZAMBIQUE) EDUARDO DIMANDE (CANADA AND USA) Physical Address: 3rd Floor Steven House Broklyn Bridge Office Park Pretoria 0181 Contact Details: Kenny: Tlou K Ramaite Managing Director Contact Details: Eduardo Dimande Territory Agent, Canada & USA Penhine PTY LTD / Saver Plug (Western Canada Office) Cell: +1 (306) Tel: (Office) Tel: (South Africa Mobile) Tel: (Mozambique) Tlou kenny@borume.co.za

11 PCT/IB2015/054827