S.I.A. Enfield.45 Conversion Kit.
|
|
- Theodore Pierce
- 6 years ago
- Views:
Transcription
1 S.I.A. Enfield.45 Conversion Kit. An ideal conversion for anyone desiring a relatively quite gun that is inexpensive to shoot, with minimum recoil. Good for target shooting, but still powerful enough at ranges under 150 yards for most small to medium game hunting or self defense. An excellent choice for those who would like to have a rifle in the same caliber as their hand gun. A great gun for youth or ladies to step up to from the.22 before graduating to high power rifles. A superior platform for suppressor use where legal. in ( ********************** > Special Interest Arms 1422-A Industrial Way Gardnerville, NV (775) , Fax (775) DRAFT COPY Call or with questions. am still working on the final version of this manual. All content copyright 2008 by S.I.A.
2 This is the basic kit. It includes the barrel, magazine adaptor, magazine, and ejector assembly. The steel parts are normally supplied with a black Parkerize finsish. The magazine adaptor is hard anodize coated.
3 The magazine adaptor. The adaptor arrives preassembled, except for adjusting the latch piece (The tapered aluminum block with two holes, at the rear of the adapor), no adjustments or disassembly should be required. The inverted "L" shaped stainless piece is the magazine release. Once installed it is recommended that you leave the adaptor in place unless it must be removed for cleaning. Reloading should be done by removing only the 1911 type pistol magazine.
4 Front sight. A Williams type sight base can be fit to the front of the barrel after headspace, or S.I.A. can provide a barrel modified to use a modified Enfield sight on request. Contents. 1. SAFETY FIRST! 2. Choosing a gun to convert. 3. Tools needed to complete the conversion. 4. Disassembly of the host Enfield. 5. Getting the old barrel off. 6. Setting headspace. 7. Open up the barrel channel. 8. Modifications to Enfield components. 9. Final assembly. 10. Loading and firing. 11. Barrel break-in, hints for accuracy. 12. Maintenance. FAQ's Trial fitting of parts. Please read the complete instructions before starting this conversion. Make all necessary modifications to the Enfield parts, headspace witness marks, and adjust the latch for the.45 magazine adaptor before final assembly. Do your "dry run" assembly of the parts without using any loctite. When everything is correct, disassemble the parts and reassemble each component useing the appropriate tools, gauges, and thread sealants.
5 1. SAFETY A. Never have any live rounds in the work area! Headspace MUST ONLY be set with dummy rounds or gauges. B. Do not convert any Enfield unless it has a working safety. C. Do not convert an Enfield that has any issues with the sear, trigger, bolt, extractor, etc. until they are corrected. D. Check for yourself that the gun is unloaded. E. Wear safty glasses when grinding parts or test firing. F. Please wear hearing protection when shooting. G. Clean the barrel before shooting. H. Follow directions and safety warnings for any chemicals you use during the build. 2. Choosing a gun to convert. This conversion can be made to a No. 1 Mk. 111, or to any variation of the No. 4 or No. 5 Enfield. Here are the pro's and con's of each model type. The No. 1 guns are usually a little less expensive to buy. The disadvantages of the No. 1 's is that they are usually much older and more worn than the No. 4 or No. 5 guns. Converting a No. 1 gun may require some grinding of the inside of the trigger guard in order for the.45 adapor to fit properly.
6 The bolt of a No. 1 may be noticeably loose in the bolt guide, this can make reliable feeding or extraction more difficult to achieve. Spare extractors or bolt heads for the No. 1 actions are harder to find and buy. The No. 1 guns mount the rear sight on the barrel, forward of the action, this gives a shorter sight radius. The No. 1 guns have round sided receivers, which often makes scope mounting more difficult. There are relatively few accessories made for the No. 1 action. If you plan to convert a No. 1 type Enfield, try to ensure that you get one with a fairly tight action. No. 4's No. 4 or No. 5 guns or actions cost a little more, but they were still being made up to the early 1960's. Most No. 4's have good tight actions, but do be sure to check that the bolt guide rail is not damaged. Most spare parts for the No. 4 type actions are plentiful and inexpensive. The selection of after market scope mounts, custom triggers, stocks, and other accessories for the No.4 or No. 5 actions is excellent. The rear sight is mounted at the rear of the receiver, giving a superior long sight radius. Most original No. 4 or No. 5 Enfield's come with a factory micrometer type adjustable rear peep sight.
7 This is very useful to compensate for the.45's ballistics! The No. 4 or No. 5 receiver is flat sided, this helps with fitting some scope mounts or after market peep sights. The late No. 4 Mk. II has a trigger that is hung from the receiver, this is the most desirable model for precision shooting. Enfield.303's are regularly imported in large numbers by several companies. At last check they were available wholesale at around $150- $175. They are also common at gun shows and pawn shops. Good clean all original guns can be expensive collectors items. The gun you will want to buy is probably one that has been sporterized several years ago, or "FTR" before being sold as surplus. Since you are replacing the barrel, it will not matter if the original bore is bad, but it might save you some money on the purchase. Always get a gun with a WORKING safety! 3. Tools needed to complete the conversion. A. Set of flat blade screwdrivers. B. Action vise. C. Barrel wrench. D. Sturdy mounted bench vise. D. Wrench for barrel nut. E. Grinder or File to modify the extractor. F. #29 drill. G tap. H..45 Dummy round, or head-space gauges. I. Blue "Loc-Tite" thread sealant.
8 4. Disassembly of the host Enfield. The most difficult task will be removing the old barrel. Unless you are refinishing the entire gun, most of it does not need to be dismantled. You do need to remove the fore-stock to remove the barrel. You will have to remove the bolt and extractor. 5. How to get the old barrel off. It may help to soak the action and chamber end of the barrel in penetrating oil for a couple of days. You will need a very sturdily mounted bench vise. You must support the receiver in order to prevent warping it while unscrewing the barrel. Action wrenches are available from gunsmith supply companies such as Brownell's. $70-$120. Alternately, if you are only doing one conversion, you may be able to make a receiver clamp from hard-wood or aluminum. You want to hold the reciever tight without crushing it. A pair of blocks cut with an internal shape similar to the reciever exterior should grip the area around the barrel base. Clamp the receiver in a vise, grip the barrel with a barrel wrench, or if you are not concerned with saving the old barrel, a large pipe wrench may be used. The barrel is a 1-14 right hand thread, once you get it to budge it usually comes off fairly easily. If it will not unscrew, or the action cannot be held tightly enough, see below. - It is better to spend a few dollars as instructed here than to ruin your receiver!
9 How do I get my old barrel off when it's REALLY stuck! If you do not have access to a lathe, a local machine shop or gunsmith can handle this for you at a nominal cost. Many Enfield barrels are extremely hard to remove, they have been on the gun for about fifty years! We find that the easiest way to get them off the receiver is as follows. A. Strip the action out of the stock, remove the rear sight, and all small parts which might come loose while the action is spinning in a lathe. B. Strip the bolt assembly, you will need a firing pin removal tool. C. Insert the bolt body into the barreled action. D. Mount the barreled action in a lathe with a "swing" of 9" or larger. E. At the receiver end place the firing pin hole of the bolt body on a live center mounted in the tail stock. F. Chuck the barrel in a self centering three jaw chuck. G. At very low speed turn off the barrel shoulder (Chamber area just in front of the receiver) to 1" diameter using a thin blade parting tool. Wear safety glasses! H. This will relieve pressure on the barrel shoulder and threads, the barrel should now unscrew easily. Since the barrel shoulder has been machined back the barrel is now scrap, this is not a problem, you are fitting a New.45 barrel. 6. Headspace the new barrel. 1. Throughly clean the receiver, particularly the threads where your new barrel will screw in. If necessary they can be "chased" with a 1-14 tap. 2. Remove the extractor from the bolt head. You will have to modify it later, as described in step?? 3. Replace the bolt head on the bolt, put the bolt assembly back in the receiver, and close it all the way. 4. Insert a dummy round or "GO" gauge into the barrel chamber. 5. Screw the barrel and it's lock ring into the receiver until it is stopped by the bolt face.
10 6. Cycle the bolt to ensure that the dummy round or gauge is fully seated in the bolt face and chamber. If the fit is now loose, tighten the barrel as above and repeat the check. 7. Mark the barrel and receiver with a "Witness mark" for reference. 8. Remove the dummy round or "Go" gauge. 9. Unscrew the barrel 1/8 to 1/4 of a turn. 10. Insert a "No-Go" gauge into the chamber and try to close the bolt. A. If the bolt will not quite close your headspace is OK. Make a new witness mark for final assembly. B. If the bolt does fully close your headspace is too great, you need to run the barrel into the action a little more. Repeat steps 5-10 until heaspace is correct. 11. Once headspace is correct remove the barrel and lock ring, add a drop of "Blue" Lock-Tite to the threads. 12. Using your witness marks, screw the barrel into the reciever until it has the same headspace as before. Quickly check your headspace, before the Lock-Tite sets up. 13. Put a drop of "Blue" Lock-Tite on the thread, tighten the lock ring against the receiver face with an AR-15 stock wrench. If you are not satisfied with the location of the lock ring's slot, you may carefull grind the back side down a little at a time until the slot rotates below the line of the stock. You should check these steps before using Lock-Tite This is why trial fitting of all components is a good idea. 14. Now you may assemble the rest of the gun. If you have any additional questions on headspacing please contact S.I.A. or a qualified gunsmith. Headspace is simple for a gunsmith.
11 7. Enlarge the barrel channel in the stock. The.45 bore is significantly larger than the original.303. This requires that the.45 barrel exterior must also be a little larger, so it will be necessary to open up the barrel channel in the stock. This can be done with a hand grinding tool and burr, or round wood rasp. Once the channel is close these tools should be followed with coarse and fine sand-paper wrapped around a suitable piece of wood dowel rod. 8. Modifications to Enfield bolt head, extractor and installation of the ejector in the receiver. A. Drill and tap receiver for the ejector stud. Use a sharp #29 drill and a 8-32 tap. Locate the hole1.25" back from the square edge of the barrel trunion, and
12 .788" from the bottom of the receiver. You want the plunger to sit in the middle of the bolt guide, about 1.25" from the end of the barrel. The inside and outside surface of the receiver may be quite hard, you must be careful not to break the tap! This usually happens just as the tap begins to show inside the receiver. Screw the plunger in until the threaded body just touches the bolt, then back it off 1/8 of a turn. Ejector Plunger as seen from inside receiver Note that only plunger button extends into path of bolt.
13 The spring loaded plunger has a dab of lock-tite, once it is adjusted you can use the cover knob as a lock nut.
14 B. Bolt head
15 Grind a small 45 angle on the left side of the bolt head to depress the ejector plunger when the bolt is pushed forward. This also creates a space for the ejector pin to get behind the cartridge case when the bolt is pulled back. Grind off just enough to depress the plunger without blocking the bolt. Do not force the bolt past the plunger, this can damage the ejector pin.
16 C. Extractor Carefully grind the end of the exractor flat to clear the end of the barrel. You want to end up with just enough space to clear the end of the barrel. This is usually about.055" from the flat at the back of the extractor. You need to releive the underside of the extractor arm so that it will put suffiecient pressure on the case rim. Grind it to.055" just where it contacts the bolt head. Adapter catch Catch adjustment screws 1911 Mag catch 1911 Magazine adapter
17 9. Final assembly. 1. Your barrel and headspace should already have been set up, checked, and finalized. 2. Your extractor and ejector modifications and installation should already be complete. 3. You may now put the action back into the stock. 4. Loosen the two alien screw that hold the magazine adaptor into the magazine catch. 5. Push the.45 adaptor body firmly into the Enfield receiver until it stops. It should be resting against the flat surfaces machined into the bottom of the bolt guide. 6. Push the adaptor catch up until the bottom edge passes the original Enfield magazine catch. 7. Now push it down until it is stopped by the original Enfield magazine catch. Tighten the locking screws. 8. Remove the adaptor body, push it back in like an original magazine. If
18 your adjustment is correct it will now be a firm fit in the reciever. 9. Verify that the adaptor is secured by the latch, it should not be able to come out without pushing on the Enfield magazine release lever. 10. Insert an empty Colt 1911 type magazine into the adaptor. It should fit and latch with a firm upward push. 11. You should not need to modify your stock or trigger guard. If you have an exceptionally tight trigger guard it may prevent the latch from moving enough to release the magazine. The catch is stainless steel, you may grind a little metal away from the outside top edge to gain more movement. When properly fitted the magazine should be a "Drop-Free" fit when the lower end of the lever is pushed in. 12. Do not force the magazine into place, the first few times the magazine is inserted it may be necessary to slightly release the catch. Once the parts have been operated a few times the magazine should automatically push the catch out until it latches in the magazine retaining notch. 10. Loading and firing. 1. Depress the stainless right side lever to remove the 1911 magazine from the Enfield adaptor. While the lever is depressed, pull the magazine down until it is clear of the adaptor. 2. Push rounds into the 1911 magazine from the front edge and downward at the same time until full. many magazines work best with one round less than full capacity. 3. Insert the loaded magazine into the bottom of the adaptor, push up until it latches in place. 4. Push the bolt smartly forward in a single motion, push the handle down to lock the action. 5. The action is now cocked and ready to fire. If you do not intend to shoot immediatly, engage the safety by rotating the lever to the rear. When ready to fire, disengage the safety by pushing the lever forward, aim, and smoothly squeeze the trigger.
19 It is recommended that you do not remove the adaptor from the action unless truly necessary for cleaning. Too frequent removal may wear the adaptor latch unnecessarily. 11. Barrel break-in, hints for accuracy. Your Enfield.45 kit comes with an air-gauged match grade Montana Rifleman precision barrel. In order to get the best accuracy and longest life from it we recommend that you "Season" the barrel before extensive shooting. This is really an easy task, it just takes a little patience. After the gun is fully assembled and all functions have been double checked. 1. Load the magazine with ONE round. 2. Chamber and fire ONE round, extract the spent case, remove the magazine, and clean the bore. Examine the primer of the first couple of rounds to verify that the firing pin does not protrude excessively. Repeat firing single rounds at least five times. 3. Load the magazine with FIVE rounds, fire and extract them, remove the magazine and clean the bore. Repeat at least three times. 4. Your barrel is now "seasoned" and ready to use normally. It is a precision instrument, cleaning after every shooting session, or occasionaly while shooting if you shoot a lot, will help to maintane it's accuracy for many years.
20 12. Maintenance. Your Enfield.45 kit was manufactured using the best possible quality materials and components. Your completed gun is a precision instrument. Please follow standard cleaning practices after each session of shooting. The.45 barrel is carbon steel, it is rifled to air gauged match quality. The exterior is a black parkerized finish unless you have applied an alternate finish. It should be lightly oiled after cleaning. Cleaning from the breech end will protect the muzzle crown. The magazine adaptor is hard coat anodized aluminum, it is scratch resistant, but not scratch proof. It may be cleaned with normal gun cleaning solvents, or mild soap and water, then dried with a soft cloth. The magazine catch is stainless steel, it is rust resistant but not rust proof. A light coat of gun oil is recommended. The small coil spring under the magazine latch should be treated to an occasional drop of oil. The magazine catch should not normally be removed for any reason, it can be replaced if necessary by driving out the stainless 1/16" roll pin. The basic Enfield action and bore should be cleaned in the same manner as any other bolt action rifle. Most Enfields have a black parkerize finish, some may have all or part of the action overlayed with a coat of black paint. Parkerized surfaces should be treated with a light coat of gun oil after cleaning.
21 "FAQ's" Why use the Enfield as a donor? The Enfield is reasonably inexpensive as a donor gun, it has a strong and well proven action. It also has a factory detachable magazine, so converting to our.45 magazine adapter is relatively simple. Where should I look for an Enfield to use for conversion? Enfield's have been imported in large numbers over the last several decades. Many of them can be found already "sporterized" at gun shows, pawn shops, or garage and estate sales. Recently imported guns are currently available from several wholesale outlets. Many gun shops will have a couple of.303 Enfield's on hand, try to buy a gun you can examine in detail before purchase. Since you intend to replace the barrel you may get a gun cheap if it has a poor bore. Why not use another gun, like a Mosin-Nagant or Persian Mauser? Those guns would be much more difficult to do, and would end up being more expensive. The Mosin-Nagant has no magazine well, the Mauser has a floor plate and internal magazine. Besides, I like Enfield's! Aren't you destroying valuable collector guns? No, the guns to convert have little or no collector value. They are usually sourced from foreign military surplus, they have been "FTR" and then sold to third world countries by the shipload. Can I change my gun back to.303 British? Yes, but why would you? It would be cheaper to just buy another Enfield.303! The receiver is only modified with a single small hole, but the barrel, bolt head, and extractor would have to be replaced. How powerful is the.45 acp round, how far can I shoot accurately with the converted gun? The.45 Automatic Colt Pistol round was originally intended for pistol use, it is excellent on targets, or game up to White -Tail deer size, it is very accurate to 50 yards, and reasonably accurate to 100 yards. It will reach much further, hitting a target at long range will take more skill at "Kentucky Windage". Can I put a scope on my Enfield.45? All standard Enfield accessories should work with the "Enfield.45". We suggest a 2.5-8, 4X or 6X scope in mm objective lens.
22 What magazines fit the Enfield.45? Any good quality 1911 Colt type single stack magazine should work. You should be aware that most states limit hunters to 5 rd. magazines, others have bans on magazines holding over ten rounds. What scope mount works best? There are several scope mounts available, but most of the inexpensive "No-Drill, No Tap" mounts are not very steady. We recently tried out an "S&K" mount, finding it to be much better than several other "instant" mounts, at a reasonable price. The Cad-Tecnik (SP?) also seems to be a good choice. The "William's" #71 scope mount screws directly to the receiver, it is very solid, and allows the scope to be used as a "Quick Detachable" type so that scopes may be interchanged, or iron sights may be used if desired. Is the completed conversion still a C&R gun? Under our understanding of the law it is not.
M16 R / M1600 R USER S MANUAL WARNING: READ THE INSTRUCTIONS AND SAFETY PRECAUTIONS IN THIS MANUAL CAREFULLY BEFORE USING THIS FIREARM.
ARMSCOR M16 R / M1600 R USER S MANUAL WARNING: READ THE INSTRUCTIONS AND SAFETY PRECAUTIONS IN THIS MANUAL CAREFULLY BEFORE USING THIS FIREARM. DISCHARGING FIREARMS IN POOLY VENTILATED AREAS, CLEANING
More informationVR1 Owner s Manual. Vigilance Rifles, Inc Plum Lane Redlands, CA P F
VR1 Owner s Manual Vigilance Rifles, Inc. 1653 Plum Lane Redlands, CA 92374 P 909.307.8877 F 909.307.8866 www.vigilancerifles.com INTRODUCTION: Vigilance Rifles offers a new line of Semi-Automatic Rifles
More informationSAFETY RULES WARNING: READ THESE SAFETY RULES & OPERATORS MANUAL BEFORE HANDLING YOUR FIREARM
SAFETY RULES WARNING: READ THESE SAFETY RULES & OPERATORS MANUAL BEFORE HANDLING YOUR FIREARM Never point a firearm at anyone and always keep the muzzle pointed in a safe direction. Always treat all firearms
More informationCOLT AUTOMATIC PISTOL
COLT AUTOMATIC PISTOL CALIBER.22 INSTRUCTIONS FOR ASSEMBLY - DISASSEMBLY CLEANING COLT AIUTOMATIC PISTOL IN 6 INCH OR 4}~2 INCH BARREL.22 Long Rifle, rim fire Cartridge Capacity of Magazine, 10 Shots Description
More informationOWNER S MANUAL. Read the instructions and warnings in this manual carefully before using this firearm; do not discard this manual.
OWNER S MANUAL SDP compact Read the instructions and warnings in this manual carefully before using this firearm; do not discard this manual. This instruction manual should always accompany this firearm
More informationFRONT BOLT ACTION ASSAULT SHOTGUN
SPECIFICATIONS: CATEGORY........... IMPROVISED; NOTE: CAN BE MANUFACTURED COMMERCIALLY CALIBRE............ 410 TO 12 GAUGE; ADAPTABLE CAPACITY............... 8 TO 10 ROUNDS,.410 CAL. OPERATION..........
More informationOwners Manual MAX-10/45 Upper Receiver. Rev. A. NFA Warning. LAGE Manufacturing, L.L.C. 916 E. Baseline Rd. STE #113 Mesa, AZ 85204
Owners Manual MAX-10/45 Upper Receiver NFA Warning LAGE Manufacturing, L.L.C. 916 E. Baseline Rd. STE #113 Mesa, AZ 85204 CM109mk2-300 Rev. A This upper receiver is designed to be used with the M-10/45
More informationHATFIELD. Continuing the Tradition SEMI-AUTOMATIC SHOTGUN INSTRUCTION MANUAL
HATFIELD Continuing the Tradition SEMI-AUTOMATIC SHOTGUN INSTRUCTION MANUAL READ THE INSTRUCTIONS AND WARNINGS IN THIS MANUAL CAREFULLY BEFORE USING THIS FIREARM SAFETY HANDLING RULES 1.Always keep the
More informationAR STYLE FIREARMS OWNER'S MANUAL: OPERATION, HANDLING, DISASSEMBLY / REASSEMBLY & SAFETY INSTRUCTIONS
AR STYLE FIREARMS OWNER'S MANUAL: OPERATION, HANDLING, DISASSEMBLY / REASSEMBLY & SAFETY INSTRUCTIONS - DO NOT DISCARD THIS MANUAL - READ THIS MANUAL CAREFULLY, PAYING CLOSE ATTENTION TO THE INSTRUCTIONS
More informationOPERATOR S INSTRUCTIONS for the ARMALITE AR-30 RIFLE
P.O. Box 299 Geneseo IL 61254 Tel 309-944-6939 fax 309-944-6949 armalite@geneseo.net OPERATOR S INSTRUCTIONS for the ARMALITE AR-30 RIFLE August 10, 2002 I. INTRODUCTION Description: Figure 1, The AR-30
More informationCleaning rod: spring steel, stainless steel or carbon fibre cleaning rod - only use a one-piece rod. Avoid using snakes.
Telemark Biathlon Where performance and precision come together http://telemarkbiathlon.com Rifle Cleaning Date : July 19, 2013 Anschutz Rifle Manual - Click Here Izhmash 7-3 Rifle Manual - still looking
More informationDIRECTIONS OF USE. Version for printout TITAN 3 TITAN 6. Rößler Waffen GmbH
DIRECTIONS OF USE Version for printout TITAN 3 TITAN 6 Rößler Waffen GmbH Ing. Walther Simmer-Weg 11 A-6330 Kufstein Tel.: +43 (0) 5372 90810 Fax: +43 (0) 5372 90811 office@jagd-shop.at www.jagd-shop.at
More informationMODEL 1400 E USER S MANUAL WARNING: READ THE INSTRUCTIONS AND SAFETY PRECAUTIONS IN THIS MANUAL CAREFULLY BEFORE USING THIS FIREARM.
ARMSCOR MODEL 1400 E USER S MANUAL WARNING: READ THE INSTRUCTIONS AND SAFETY PRECAUTIONS IN THIS MANUAL CAREFULLY BEFORE USING THIS FIREARM. DISCHARGING FIREARMS IN POORLY VENTILATED AREAS, CLEANING FIREARMS
More informationOwners Manual MAX-10/9 mk2 Upper Receiver. LAGE Manufacturing, L.L.C. 916 E. Baseline Rd. STE #113 Mesa, AZ Rev. A
Owners Manual MAX-10/9 mk2 Upper Receiver LAGE Manufacturing, L.L.C. 916 E. Baseline Rd. STE #113 Mesa, AZ 85204 CM109mk2-300 Rev. A NFA Warning This upper receiver is designed to be used with the M-10/9
More informationPISTOL CALIBER AR STYLE FIREARMS
PISTOL CALIBER AR STYLE FIREARMS OWNER'S MANUAL: OPERATION, HANDLING, DISASSEMBLY / REASSEMBLY & SAFETY INSTRUCTIONS - DO NOT DISCARD THIS MANUAL - READ THIS MANUAL CAREFULLY, PAYING CLOSE ATTENTION TO
More informationSAAMI. Semi-Automatic Assault Shotgun Owner s Manual. Tel. : Fax
Head Quarter Beyşehir Organize Sanayi Bölgesi Bayavşar Mah. 4959 Sk. No.24-42700 Beyşehir - Konya / TURKEY Tel. : +90 332 524 60 32-34 - Fax +90 332 524 62 4 - info@deryaarms.com SAAMI SPORTING ARMS AND
More informationOPERATION AND FUNCTION
CHAPTER 3 OPERATION AND FUNCTION This chapter discusses the operation of the M249 automatic rifle. This includes loading, unloading, cycle of functioning, adjusting the sight, and using the bipod. 3-1.
More informationARAK-21 OPERATOR SAFETY AND INSTRUCTION MANUAL
ARAK-21 OPERATOR SAFETY AND INSTRUCTION MANUAL NOTICE: The ARAK-21 Upper Assembly itself is not considered a Firearm under federal law or the National Firearms Act. The ARAK-21 Upper Assembly mounted on
More informationCHAPTER 2 MAINTENANCE
CHAPTER 2 MAINTENANCE This chapter addresses the proper care of the machine gun to ensure its overall effectiveness and efficient functioning. The information includes the gunner's knowledge in disassembly
More informationSterling Shotguns. Field and Target Models. Owner s Manual
Sterling Shotguns Field and Target Models Owner s Manual If you have any questions about the safe use of a Big Horn Armory firearm, call us at 307-586-3700 or write us at P.O. Box 940, Cody Wyoming 82414.
More informationArmed Officer's Training Manual Nomenclature and Inspection
Armed Officer's Training Manual Section 8: Nomenclature and Inspection Learning Goal: The student will know the components and understand the operation of the service revolver and semi-automatic pistol.
More informationProduction Date of prod. Manufacturer number
Brno Czech Republic Production number Date of prod. Manufacturer 2 Pos. Item name Part no. Pos. Item name Part no. 1 Magazine 5 1207.0001 47 Tripping lever 1207.0140 2 Rod 1207.0002 48 Seat - assembly
More informationOwners Manual MAX-11 mk2 Upper Receiver
Owners Manual MAX-11 mk2 Upper Receiver LAGE Manufacturing, L.L.C. 916 E. Baseline Rd. STE #113 Mesa, AZ 85204 CM11-300 NFA Warning This upper receiver is designed to be used with the SWD M-11/9 submachine
More informationINSTRUCTION MANUAL CZ 630/631
INSTRUCTION MANUAL CZ 630/631 Before handling the air rifle read this manual carefully and observe the following safety instructions. Improper and careless handling of the air rifle could result in unintentional
More informationWORLD CHAMPION. SMALL BORE RIFLE.22 l.r. MANUAL. Technical Innovations
SMALL BORE RIFLE.22 l.r. MANUAL Technical Innovations Technical Innovations -General information Page 2 -Bedding Page 3 -Three locking lugs Page 4 -Safety / dry fire switch Page 4 -Firing pin Page 4 -Firing
More informationPlease visit our website at and leave your comments.
We promise our customers the best services and premium quality products with value. MODIFY and its logo are registered trademarks. Please visit our website at www.modify.com.tw and leave your comments.
More informationOPERATION AND FUNCTIONING
C1, FM 23-65 * CHAPTER 3 OPERATION AND FUNCTIONING This chapter explains the operation of the MG. It discusses the loading, unloading, and clearing procedures, and the cycle of functioning of the weapon.
More information22-17 Partner. Owner s Manual. 624 Old Pacific Hwy SE Olympia, WA Tel (800) Fax (360) Available Rifle Kit
Available Rifle Kit Complete Upper Receiver Kit 624 Old Pacific Hwy SE Olympia, WA 98513 Tel (800) 228-3471 Fax (360) 491-3447 Owner s Manual 22-17 Partner Warnings & Operation Do not attempt to fire the
More informationSHF R50 SHF S50 Safety Harbor Firearms, Inc. PO Box 563 Safety Harbor, FL Ph: Fax:
SHF R50 SHF S50 Safety Harbor Firearms, Inc. PO Box 563 Safety Harbor, FL 34695-0563 Ph: 727-726-2500 Fax: 727-797-6134 www.safetyharborfirearms.com 1 ^ WARNING Risk of serious injury or death. Failure
More informationP9S Automatic Pistol Caliber.45 ACP
P9S AUTOMATIC PISTOL Caliber.45 ACP P9S Automatic Pistol Caliber.45 ACP Instruction Manual HECKLER & KOCH, INC. 2148 Pacific Boulevard Sterling, Virginia 20166-8903 U.S.A. TEL. (703) 450-1900 TELEFAX (703)
More informationTM WARNING SUMMARY
TM 9-005-239-0 WARNING SUMMARY Treat every firearm as if it were loaded. Never accept or take over a firearm from another until you have checked personally to see that it is unloaded or in a completely
More informationIZH 60/61 air rifle owner s manual
IZH 60/61 air rifle owner s manual IZH 61 IZH 60 5135 Naiman Parkway Solon, OH 44139 216-220-1180 Record your gun s serial number:... Follow the warnings and safety procedures shown here and throughout
More informationSTRIBOG GRAND POWER. The INSTRUCTIONS FOR USE, MAINTENANCE AND SAFETY. 1
instructions The for use, maintenance STRIBOG and safety hestribog GRAND POWER INSTRUCTIONS FOR USE, MAINTENANCE AND SAFETY www.grandpower.eu 1 The STRIBOG Dear Customer, Thank you for purchasing a semi-automatic
More informationDisassembly, Assembly, and Cleaning of M16A4/M4
Table of Contents iii Disassembly, Assembly, and Cleaning of M16A4/M4 By: George Carter Chris Talbott Jeremy Tinker Table of Contents Introduction... vii Disassembly... 3 Clearing the Magazine... 3 Retaining
More informationINSTRUCTION MANUAL CZ 75 Champion
INSTRUCTION MANUAL CZ 75 Champion CZ 75 CHAMPION - INSTRUCTION MANUAL Before handling the pistol read this manual carefully and observe the following safety instructions. Improper and careless handling
More informationINSTRUCTION MANUAL CZ 750
INSTRUCTION MANUAL CZ 750 Before handling the firearm read this manual carefully and observe the following safety instructions. Improper and careless handling of the firearm could result in unintentional
More informationIntroduction 4-5 Ten commandments of safety 6-12 Important Parts & Mechanism Loading and Firing Unloading 24 Cleaning Complete
www.utasarms.com www.utasarms.com www.utasarms.com Introduction 4-5 Ten commandments of safety 6-12 Important Parts & Mechanism 13-15 Loading and Firing 16-23 Unloading 24 Cleaning 25-28 Complete Disassembly
More information-
Operator s manual SM-95202 Brügger & Thomet AG P.O. Box 42 3608 Thun Switzerland Fon +41 33 334 67 00 Fax +41 33 334 67 01 info@brugger-thomet.ch www.brugger-thomet.ch TABLE OF CONTENTS SAFETY instructions
More informationMECH-TECH SYSTEMS CCU MODEL FOR GLOCK PISTOLS
MECH-TECH SYSTEMS CCU MODEL FOR GLOCK PISTOLS Operation & Maintenance Manual Read and understand this manual before attempting to use this product. If you have any questions call: 1-866-433-2122 www.mechtechsys.com
More informationCONTENTS INTRODUCTION. WARNING: This manual contains important warnings that must be understood before using this firearm.
CONTENTS Safety Rules...............................Page 2 Operation................................Page 5 Major Components.........................Page 6 Assembly.................................Page
More informationNATIONAL PARK SERVICE MANUAL FOR THE HANDLING AND FIRING OF U.S. M1911 and M1911A1 Colt Automatic Pistol,.45 A.C.P. Caliber IN INTERPRETIVE
NATIONAL PARK SERVICE MANUAL FOR THE HANDLING AND FIRING OF U.S. M1911 and M1911A1 Colt Automatic Pistol,.45 A.C.P. Caliber IN INTERPRETIVE DEMONSTRATIONS 1 PREFACE This manual sets forth the procedures
More informationCZ52 Detail Strip, Disassembly, and Assembly Instructions Lonestar Fabrication & Design
CZ52 Detail Strip, Disassembly, and Assembly Instructions 2008 Lonestar Fabrication & Design These instructions may be freely distributed and copied providing this page is included, and providing they
More informationMARINE CORPS INSTITUTE INSPECTION AND REPAIR OF THE M9 PISTOL
MARINE CORPS INSTITUTE INSPECTION AND REPAIR OF THE M9 PISTOL MARINE BARRACKS WASHINGTON, DC Table of Contents Page Contents... Navigation Instructions... i iii Chapter 1 Disassembly and Assembly of the
More informationSAR-15 RIFLE OWNERS MANUAL
SAR-15 RIFLE OWNERS MANUAL SIONICS WEAPON SYSTEMS Our mission is to manufacture quality firearms made with pride in the USA. We are able to do accomplish this by using only the best American made parts.
More informationBeeman Precision Airguns Spring-Piston Air Rifles P1, P3, P11
Beeman Precision Airguns Spring-Piston Air Rifles P1, P3, P11 User Instruction Manual V1 10/17 CONTENTS Rules of safe shooting...3 Cocking & Loading... 4 Safety... 4 Sight Adjustment...5 Trigger Adjustment...5
More information2-1. CLEARING PROCEDURES
CHAPTER 2 MAINTENANCE Proper maintenance contributes to weapon effectiveness as well as unit readiness. This chapter discusses the maintenance aspects of the M249 AR to include inspection; cleaning and
More information;\- ,.. SAFETY WARNING: Failure to obey a safety warning may result In Injury to you or. T to others. T LOADED AND THE SAFETY IS IN THE
,.. SAFETY WARNING: Failure to obey a safety warning may result In Injury to you or T to others. '-"f"oi:ti,., WARNING INSTRUCTIONS FOR THE MODEL 1400 CAUTION-ALWAYS KEEP THE T MUZZLE POINTED IN A SAFE
More informationREC7 DI OPERATOR S MANUAL
EC7 D REC7 DI OPERATOR S MANUAL TABLE OF CONTENTS 2 2 4 5 6 6 6 8 8 10 11 12 12 13 13 15 18 20 22 USE OF THIS MANUAL SAFETY GUIDELINES WARRANTY AND SERVICE NOTES FUNCTIONS AND FEATURES BREAK IN PROCEDURE
More informationNOTICE FEATURES BACKGROUND
,/ NOTICE Claims will not be honored for damage, injury or, death resulting from the intentional or accidental discharge of this firearm, or from it's function when used for purposes or subjected to treatment
More informationM1600 SEMI-AUTOMATIC RIFLE USER S MANUAL WARNING: READ THE INSTRUCTIONS AND SAFETY PRECAUTIONS IN THIS MANUAL CAREFULLY BEFORE USING THE FIREARM.
M1600 SEMI-AUTOMATIC RIFLE USER S MANUAL WARNING: READ THE INSTRUCTIONS AND SAFETY PRECAUTIONS IN THIS MANUAL CAREFULLY BEFORE USING THE FIREARM. SEPTEMBER 2016 ROCK ISLAND ARMORY USER S MANUAL M1600 SEMI-AUTOMATIC
More informationODEL 95 OPERATOR S MANUAL
ODEL 95 MODEL 95 OPERATOR S MANUAL TABLE OF CONTENTS 2 2 3 5 6 6 6 7 7 8 8 11 11 12 12 19 20 22 24 26 MANUFACTURER S DISCLAIMER USE OF THE MANUAL SAFETY GUIDELINES WARRANTY AND SERVICE DESCRIPTION OF FIREARM
More informationM*CARBO Mosin Nagant 91/30 Trigger Spring Kit Download or Print Instructions Contact: Page 1
Download or Print Instructions Contact: help@mcarbo.com Page 1 Step 1: Clear your Firearm - Check the chamber, the bolt face and magazine well. 1. 2. 3. 4. 5. 6. 7. 8. Step 2: Gather Parts and Tools Needed
More informationINSTRUCTION MANUAL. Slavia 630/631
INSTRUCTION MANUAL Slavia 630/631 Before handling the air rifle read this manual carefully and observe the following safety instructions. Improper and careless handling of the air rifle could result in
More informationAR /.223, 300 BLK, 22 Nosler,.224 Valkyrie. Covers. and. rifle models INSTRUCTION MANUAL
AR-15 5.56/.223, 300 BLK, 22 Nosler,.224 Valkyrie Covers TM, TM and, TM rifle models INSTRUCTION MANUAL WARNING: BEFORE USING THIS FIREARM, READ AND FOLLOW THESE INSTRUCTIONS Safety First Thank you for
More informationBarrel Assembly. Field Stripping
WARNINGS: Carry out safety check before handling the weapon. The weapon is heavily oiled for shipping. Clean and lubricate before firing. These procedures given apply only to the US Ordnance QCB version.
More informationINSTRUCTION MANUAL CZ 75 TS
INSTRUCTION MANUAL CZ 75 TS CZ 75 TS - INSTRUCTION MANUAL Before handling the pistol read this manual carefully and observe the following safety instructions. Improper and careless handling of the pistol
More informationINSTRUCTION MANUAL CZ 92
INSTRUCTION MANUAL CZ 92 Before handling the pistol read this manual carefully and observe the following safety instructions. Improper and careless handling of the pistol could result in unintentional
More informationINSTRUCTION MANUAL CZ 550 Medium, Magnum
INSTRUCTION MANUAL CZ 550 Medium, Magnum Before handling the firearm read this manual carefully and observe the following safety instructions. Improper and careless handling of the firearm could result
More informationOperation Manual Spring Operated Break-Barrel & Under-Lever Pellet Rifles
WARNING: This gun can cause serious injury or death. Read and follow the instructions carefully. Do not load a pellet into the gun until you are ready to shoot. If you do load a pellet and then decide
More informationUSER MANUAL TEDNA Shotguns. Over & Under Side by Side Semi-Automatic
USER MANUAL TEDNA Shotguns Over & Under Side by Side Semi-Automatic Zenith Firearms www.zenithfirearms.com Come shoot the quality. Zenith Firearms, an American importer of high quality fi.rearms.and.accessories,.is.a.proud.distributor.of.
More informationCETME. SPECIAL PURPOSE ASSAULT MACHINEGUN 5.56x45 DESCRIPTIVE HANDBOOK
, CETME SPECIAL PURPOSE ASSAULT MACHINEGUN 5.56x45 DESCRIPTIVE HANDBOOK , SPECIAL PURPOSE ASSAULT MACHINEGUN 5.56x45 DESCRIPTIVE HANDBOOK Patent Pending ,. SPAM 5.56x45 INDEX I. Technical characteristics................................
More informationNot a toy. Adult supervision required. Misuse or careless use may cause serious injury or death. May be dangerous up to 500 yards (457 meters).
Owner s manual www.umarex-usa.com CO2 repeater rifle cal..177 (4.5mm) pellet cal..22 (5.5mm) pellet Not a toy. Adult supervision required. Misuse or careless use may cause serious injury or death. May
More informationSEMIAUTOMATIC SHOTGUN OWNER'S MANUAL
SEMIAUTOMATIC SHOTGUN OWNER'S MANUAL ARMSAN@ARMSAN.COM TECHNICAL DATA Caliber :12 gauge / 20 gauge / 28 gauge Operation: Semi-Automatic, Gas Operated System Barrel Length: 20 (51cm), 24 (61cm), 26 (66cm),
More informationIVERcm. JOHNSON. u.s. CARBINE.22 MODEL: EW.22HBA. Caliber:.22 leng rille
IVERcm. JOHNSON u.s. CARBINE.22 MODEL: EW.22HBA Caliber:.22 leng rille Please specify on order parts number and name. Cat. Spare No. Parts 1 Trigger housing 2 Barrel 3 Barrel pin (2) 4 Operating slide
More informationSASS M110 Repair Parts
HOURLY REPAIR RATE $ CONTRACTOR REPAIR/REPLACEMENT 25362 2-Stage Match Trigger, 4.5 lbs. N/A 25362 94354 Trigger N/A 25362 94031 Spring, Sear N/A 25362 25361 Match Front Hook, (Sear) (6-40 Threaded) N/A
More informationKentucky Long Rifle.50 BMG Model: BA M-N-M Tactical. Users Guide
Kentucky Long Rifle.50 BMG Model: BA M-N-M Tactical Users Guide Metals-N-More Bowling Green, KY 42101 Telephone 270-781-3642 Fax 270-781-3766 Email Info@Kentucky50.Com www.kentucky50.com INTRODUCTION Congratulations
More informationPrecise and accurate are two words that
DIESEL n DUST Schultz & Larsen Hunter Traveller chambered in.270 Winchester Article and Photos by Editor Precise and accurate are two words that I would use to sum up Danish firearm manufacturer Schultz
More informationBefore handling the firearm read this manual carefully and observe the following safety instructions. CONTENTS
Before handling the firearm read this manual carefully and observe the following safety instructions. Improper and careless handling of the firearm could result in accidental discharge and cause injury,
More informationMARLIN Model: 882SS -22 WMR - (22 Magnum) * Now Called Model 982S
Page 1 of 16 MARLIN Model: 882SS -22 WMR - (22 Magnum) * Now Called Model 982S Bolt action rifle. 22 Win. Magnum Rim Fire; nickel-plated 7-shot clip magazine; 22" Micro-Groove barrel; stainless steel barrel,
More informationCZ 40 P - INSTRUCTION MANUAL
Before handling the pistol read this manual carefully and observe the following safety instructions. Improper and careless handling of the pistol could result in unintentional discharge and could cause
More informationOWNER S MANUAL READ THIS MANUAL BEFORE USING YOUR NEW AIRGUN
OWNER S MANUAL READ THIS MANUAL BEFORE USING YOUR NEW AIRGUN FX SUPER SWIFT Table of Contents Warranty Specifications General Instructions Operating Instructions Trigger Adjustments Care & Maintenance
More informationFOR 500, 505, 510, 535, 590 AND 835
12173 English_Layout 1 3/5/18 3:38 PM Page 1 OWNERS MANUAL FOR 500, 505, 510, 535, 590 AND 835 PUMP ACTION SHOTGUNS IMPORTANT SAFETY WARNINGS - NOTE THE SYMBOL THESE SAFETY WARNINGS ARE FOR YOUR PROTECTION
More informationIZH 46M air pistol owner s manual
IZH 46M air pistol owner s manual 18370 S. Miles Rd. Warrensville Heights, OH 44128 216-220-1180 Record the serial number of your airgun... Follow the warnings and safety procedures shown here and throughout
More informationShooters Ridge 10/22 Magazine Troubleshooting Guide (Questions and answers apply to all SR 10/22 magazines unless noted)
Shooters Ridge 10/22 Magazine Troubleshooting Guide (Questions and answers apply to all SR 10/22 magazines unless noted) BACKGROUND This troubleshooting guide is designed to help consumers with any problems
More informationWARNING. Paintball Pistol. Paintball Pistol
This lightweight assault paintball pistol is custom milled from high grade aluminum for superb balance and precision. The compact construction of this competition paintball pistol will give you a mobile
More informationexperience the difference
experience the difference Light Precise Less Recoil No maintenance Carbon graphite is a natural substance 4 times stronger than steel, 5 times stiffer than steel and 5 times lighter than steel. Its shape
More informationi Product Catalog
Catalog 2017-2018 i 2 Our Mission 01. Reliability 03. Value The receiver is designed to Here is what our customers control the cartridge as it is fed from the magazine into the chamber. Careful attention
More informationOWNER S MANUAL FOR OA SERIES FIREARMS
OWNER S MANUAL FOR OA SERIES FIREARMS 620-626 Old Pacific Hwy SE Olympia, WA 98513 (360) 459-7940 WARNING To avoid accidental firing, BE SURE WEAPON IS CLEAR. Failure to do so could result in serious injury
More informationOPERATOR S MANUAL FOR AR-24 SERIES PISTOLS
OPERATOR S MANUAL FOR AR-24 SERIES PISTOLS ArmaLite Incorporated Box 299 Geneseo Illinois U.S.A. 61254 309-944-6939 ArmaLite.com 2006 ArmaLite Inc. This book provides instructions on the operation and
More informationINSTRUCTION MANUAL DEADLINE MADE IN CANADA
INSTRUCTION MANUAL DEADLINE MADE IN CANADA 2 ABOUT The Deadline action is specifically designed for long range, precision shooting. Its components are made using the cutting edge of technology and subject
More informationNRA Assembly/ Disassembly Guides Practical Exercise
NRA Assembly/ Disassembly Guides Practical Exercise This sneak preview of your study material has been prepared in advance of the book's actual online release. 1 NRA Assembly/Disassembly Guides Practical
More informationCLEANING HANDGUNS TOOLS YOU WILL NEED
CLEANING HANDGUNS CLEANING HANDGUNS If you take pride in your firearm, then you know how important it is to properly maintain your weapon. With good, consistent care, you not only make your gun look good
More informationMP-512 Standard Air Rifle. Instruction Manual
MP-512 Standard Air Rifle Instruction Manual CONTENTS 1 Introduction... 3 2 Purpose...3 3 Specifications... 3 4 List of Assembly Units and Parts. Set of Delivered Items... 3 5 Design and Principle of Operation...
More informationMini Mr.Bulletfeeder by Double-Alpha
Mini Mr.Bulletfeeder by Double-Alpha User Manual Thank you for choosing the Mini Mr.Bulletfeeder by Double-Alpha! This newly designed product will give you years of reliable service. It will make your
More informationFX IMPACT OWNER S MANUAL
made in sweden FX IMPACT OWNER S MANUAL Warranty Information All FX Airguns carry a One Year Warranty against faulty workmanship and defective materials. If it becomes necessary, first contact the dealer
More informationBefore handling the pistol read this manual carefully and observe the following safety instructions. CONTENTS
Before handling the pistol read this manual carefully and observe the following safety instructions. Improper and careless handling of the pistol could result in unintentional discharge and could cause
More informationINSPECTION CERTIFICATE MOD.
S3C11010/3 INDEX Owner s manual pages 6-10 456 1. 2. CAL. 300 Win. Short Mag. MADE IN FINLAND SAKO A7 S 123456 A A C B 1 2 A 3. D G E E F F The transport position The rifle is cocked The rifle is cocked
More informationSwedish Mauser Rifle Manual
A translation from the 1977 Swedish Army Manual (SoldI Mtrl) Translated by Anders J. 1999 Note: Feel free to copy this manual and to pass it along to someone else. I only ask you to respect my copyright
More informationEd Brown Products, Inc.
Ed Brown Products, Inc. P.O. Box 492, Perry, MO 63462 - (573)-565-3261 - FAX (573)565-2791 Internet Address: www.edbrown.com email: edbrown@edbrown.com Ed Brown 1911 Owner s Manual WARNING: YOU MUST READ
More informationINSTRUCTION MANUAL CZ 452/453
INSTRUCTION MANUAL CZ 452/453 Before handling the firearm read this manual carefully and observe the following safety instructions. Improper and careless handling of the firearm could result in unintentional
More informationThis document is intended to illustrate the tools and techniques necessary to service the gas system on the M14-type rifle and its variants.
Warning! The material expressed in this document is the personal view of the author. This information is to be used for informational and entertainment purposes only! The author of this document assumes
More informationM14Y.22LR YOUTH BOLT ACTION USER S MANUAL WARNING: READ THE INSTRUCTIONS AND SAFETY PRECAUTIONS IN THIS MANUAL CAREFULLY BEFORE USING THE FIREARM.
M14Y.22LR YOUTH BOLT ACTION USER S MANUAL WARNING: READ THE INSTRUCTIONS AND SAFETY PRECAUTIONS IN THIS MANUAL CAREFULLY BEFORE USING THE FIREARM. SEPTEMBER 2016 ROCK ISLAND ARMORY USER S MANUAL M14Y.22LR
More informationMorini CM 22M. Technical Data
Morini CM 22M Technical Data Caliber: Weight: Total Length: Total Height: Total Width: Length of Sight Line: Barrel Length: Number of Riflings: Trigger: 1 st stage weight: 2 nd stage weight: Sight: Sight
More informationPaintball Marker. User s Manual. 530 South Springbrook Road Newberg, OR 97132
Paintball Marker User s Manual 530 South Springbrook Road Newberg, OR 97132 Component Concepts, Inc., 530 South Springbrook Road, Newberg, OR 97132 Phone: (503) 554-8095 Fax: (503) 554-9370 www.phantomonline.com
More informationKHANSHOTGUNS. Thank you for choosing KHANSHOTGUNS coachgun
Thank you for choosing KHANSHOTGUNS coachgun Your coachgun represents a piece of rich history of quality firearms design and manufacture. During the manufacturing process, we have endeavored to incorporate
More informationAR-Podium. Instructions Manual
AR-Podium Instructions Manual Thank you for purchasing another quality product by FAB-Defense. The AR-Podium implements a bi-pod support for the AR platform in a new and innovative way. With the AR-Podium,
More informationBefore handling the firearm read this manual carefully and observe the following safety instructions. CONTENTS
Before handling the firearm read this manual carefully and observe the following safety instructions. Improper and careless handling of the firearm could result in accidental discharge and cause injury,
More informationNo Mausers Lost Their Lives in the Production of This Article
No Mausers Lost Their Lives in the Production of This Article by RGI Media, Inc - Published with permission The problem with working on Cosmoline soaked WWII relics is that the process is addictive. Projects
More informationKHANSHOTGUNS. Thank you for choosing KHANSHOTGUNS 20 Gauge over & under shotgun
Thank you for choosing KHANSHOTGUNS 20 Gauge over & under shotgun Your over & under shotgun represents a piece of rich history of quality firearms design and manufacture. During the manufacturing process,
More informationSmallbore rifle CZ99 PRECISION..22 Long Rifle.22 Win. Mag. R.F..17 Hornnady Mag. R.F.
Smallbore rifle CZ99 PRECISION.22 Long Rifle.22 Win. Mag. R.F..17 Hornnady Mag. R.F. Fig. 1 22. Long Rifle, Model CZ 99 PRECISION 22 Long Rifle 22 Long Rifle for Sound Moderator 22 Win. Mag. R. F. 17
More information