Competition Product Catalog

Transcription

1 Product Catalog Photo by: Patti Wierzbicki - J & J Promotions Photo by: Brad Malmgren Photography Cardell Photo by: Brad Malmgren Photography Photo by: Gary Walton

2 Studs STEEL CHISEL TOOTH TRACTION MASTER 48 studs and lock nuts (1.325 packs contain Big Nuts).750 7mm CAP mm CAP mm CAP mm CAP mm CAP mm CAP /16 CAP /16 CAP /16 CAP-1325-S TITANIUM STUDS Chisel Tooth - sold by piece only mm TCL-1067 Wide Body Chisel Tooth - sold by piece only mm TWB-1067 Sold by piece only Build to order. Additional titanium product available if ordered by Sept. 30th. Contact mike@wiem.com for more info. 45 MODIFIED GOLD DIGGER CARBIDE TRACTION MASTER 48 studs and 48 lock nuts (1.325 & contain Big Nuts).750 7mm GDP-750M.875 7mm GDP-875M.920 7mm GDP-920M /16 GDP-107M /16 GDP-117M /16 GDP-132M-S /16 GDP-145M-S STEEL CHISEL TOOTH T-NUT STYLE 48 studs only.750 1/4-20 CLT mm CLT-1060 SNAP-OFF STYLE 48 studs only mm CLTX-1060 HOLLOW SNOCROSS / HILL DRAG Two piece Construction - 60 Carbide (30% lighter than Snocross stud) Sold by piece only /16 HRS-1880 NEW 30 ELIMINATOR STEEL TRACTION MASTER 48 studs and lock nuts.700 1/4-28 GEP /4-28 GEP /4-28 GEP /4-28 GEP /4-28 GEP mm GEP mm GEP /16 GEP-1325-S STEEL CHISEL TOOTH 48 studs and Big Nuts /16 CAP /16 CAP-1860 WIDE BODY STEEL CHISEL TOOTH T-NUT STYLE 48 studs only mm CWB-1060 CHISEL TOOTH HOOKER 48 studs only.800 1/4-20 HCL-8000 Copyright IEM. All rights reserved.

3 30 ELIMINATOR STEEL T-NUT STYLE 48 studs only.700 1/4-20 GEL /4-20 GEL mm GEL-1067 Slim Profile.820 1/4-20 GELS /4-20 GELS-9200 SNOCROSS Bulk package - 96 ea. of studs & Big Nuts /16 RACE-1860-BL 24 & 1000 pc. pkgs available upon request The stud is the correct length for lug tracks that come stock on Ski-Doo, Polaris and Arctic Cat sleds. SNAP-OFF STYLE 48 studs only /4-20 GELX-1000 TRIGGER 48 studs and lock nuts ( contain Big Nuts) /16 TRIG /16 TRIG /16 TRIG-1450-S /16 TRIG-1630-S /16 TRIG-1860-S for Up Hill Drags NOT for Sno-X application GRAND MASTER PRO 60 MODIFIED 48 studs and 48 lock nuts ( contain Big Nuts) /16 GMPP /16 GMPP /16 GMPP /16 GMPP For single-ply tracks only. Must use Grand Digger support plates. 48 piece package Round ARG Square ASG Double ADG Combo ARGC STEEL HOOKER ELIMINATOR 48 studs only.440 1/4-20 HST /4-20 HST /4-20 HST /4-20 HST /4-20 HEP /4-20 HEP-9000 SNOCROSS 60 MEGA-BITE Standard package - 24 ea. of studs & Big Nuts /16 MEG-1325-S /16 MEG-1450-S /16 MEG-1575-L /16 MEG-1740-L Bulk package - 96 ea. of studs & Big Nuts /16 MEG-1325-BS /16 MEG-1450-BS /16 MEG-1575-BL /16 MEG-1740-BL For studding templates/patterns visit our website at or call our tech line at RACE SCREW Size Qty RASC RASC-1550-B 3

4 Support Plates 5/16 and 7mm SQUARE DIGGER 7mm Square aluminum support plates Hole QTY 7mm 24 ASW mm 96 ASW-3725-B 7mm 144 ASW-3725-C 7mm 1000 ASW-3725-M 5/16 Square aluminum support plates 5/16 24 ASW /16 96 ASW B 5/ ASW C 5/ ASW M 5/16 ROUND DIGGER ALUMINUM 5/16 Round aluminum support plates Hole QTY 5/16 24 AWA /16 96 AWA-3775-B 5/ AWA-3775-C 5/ AWA-3775-M DOUBLE DIGGER ALUMINUM Hole QTY 7mm 12 ADD mm 48 ADD-3725-B 5/16 12 ADD /16 48 ADD B Thin Double Digger Hole QTY 5/16 1 ADDT /16 COLORED SQUARE DIGGER 5/16 Aluminum support plates Color Green ASW Red ASW Blue ASW Yellow ASW Black ASW White ASW Available in quantities of 24, 96, 144 and 1,000 piece packages. 5/16 COLORED ROUND DIGGER 5/16 Aluminum support plates Color Hole QTY Green 5/16 48 AWA-3780 Red 5/16 48 AWA-3790 Blue 5/16 48 AWA-3795 Yellow 5/16 48 AWA-3800 Black 5/16 48 AWA-3810 White 5/16 48 AWA mm ROUND DIGGER DO NOT USE WITH STUDS LONGER THAN Material QTY Aluminum 24 AWA-3700 Aluminum 96 AWA-3700-B Aluminum 1000 AWA-3700-M 5/16 COLORED DOUBLE DIGGER 5/16 Aluminum support plates Color Hole QTY Green 5/16 48 ADD Red 5/16 48 ADD Blue 5/16 48 ADD Yellow 5/16 48 ADD Black 5/16 48 ADD White 5/16 48 ADD /16 SHALLOW SOCKET TOOL Woody s developed a unique shallow socket for installing studs that provides the torque to tighten without touching the surface of the support plate. Works ideal with colored support plates. Deep enough to install studs up to length. SCW-4505

5 US Patent No. D SINGLE ALUMINUM ANGLED DIGGER 5/16 aluminum angled support plates Hole QTY 5/16 24 ANG /16 96 ANG-3775-B 5/ ANG-3775-C 5/ ANG-3775-M 7mm aluminum angled support plates Hole QTY 7mm 24 ANG mm 96 ANG-3725-B 7mm 144 ANG-3725-C 7mm 1000 ANG-3725-M TRIANGLE DIGGER ALUMINUM Hole QTY 7mm 48 AWT mm 1000 AWT-3725-M 5/16 48 AWT / AWT-3775-M If using T-nut sytle studs for drag racing with a 7mm Triangle Digger Plate you will need to use a stud length. BENDER STUD MATE 7mm Material QTY Aluminum 12 AWL-3750 Aluminum 48 AWL-3750-B DOUBLE DIGGER ALUMINUM ANGLED Hole QTY 7mm 12 ADA mm 48 ADA-3725-B 5/16 12 ADA /16 48 ADA B SINGLE BENDER STUD MATE 7mm Material QTY Aluminum 12 AWL-2700 Aluminum 48 AWL-2700-B COMB DIGGER ALUMINUM 5/16 SUPPORT PLATE/NUT For studs that are and longer Two-ply Tracks Hole QTY 5/16 24 AWC /16 48 AWC / AWC Single-ply Tracks 5/16 24 ARGC /16 48 ARGC / ARGC FAT MAX MOUNTAIN PADDLE Hole Size Material SIZE QTY Titanium 2.5 x 2 4 LSSP Titanium 2.5 x 2 12 LSSP Titanium 2.5 x LSSP Titanium 2.5 x LSSP Titanium 3.5 x 2 4 LSSP Titanium 3.5 x 2 12 LSSP Titanium 3.5 x LSSP Titanium 3.5 x LSSP

6 Washers, Nuts & Accessories T-NUTS Size Thread QTY 3/4 1/ ATD /16 1/ ATD /16 7mm 48 ATD-9387 TRACK SAVER TOOL 3/4 *While supplies last ATT-4260 For 7/8 Dished T-nuts ATT-3875 For Race ONLY - sold by piece Better penetration, lighter weight BIG NUT with NO nylon insert - Alum.450 5/16 ALN-4500 For studs to /16 ALN-7000 For studs longer than1.450 BIG NUT with nylon insert - Aluminum Size Thread QTY.450 5/16 24 ALN /16 96 ALN B.450 5/ ALN M For studs to Size Thread QTY.700 5/16 24 ALN /16 96 ALN B.700 5/ ALN M For studs longer than1.450 INDEXING TOOL For 5/16 Woody s Square Digger Support Plates SPI-TOOL-5 For 7mm Woody s Square Digger Support Plates SPI-TOOL-7 For Woody s Square Grand Digger Support Plates SPI-TOOL-G TRIANGLE INDEXING TOOL For both 5/16 and 7mm Woody s Triangle Digger Support Plates use: SPI-TOOL-T STUD HEX TOOL STUD-INSTALL STUD-INSERT2 (two hex pieces) SPRING TOOL Size SPR2-TOOL-S 10 SPR2-TOOL-L 15

7 LOCK NUTS STEEL Thread QTY 7mm 48 NYL mm 1000 NYL-5000-M 1/4 48 NYL / NYL-5010-M 5/16 48 NYL / NYL-5020-M TRACK DRILL Universal Track Drill DRIL-UNIV STAR WASHER ID-THICKNESS QTY 1/ HSW mm HSW-4900 STEEL SHARPENING TOOL Size TOOL-SHARP-3 30 TOOL-SHARP-4 45 TOOL-SHARP-6 60 Replacement Inserts, pkg of 4 TOOL-INSERT-4 SHIM WASHERS 48 shims/pkg Material ID-OD-Thickness Alum. 1/4-1/ ASW-3950 Steel 7mm-1/ ASW-4000 WOODY S TRAILER DECAL x 23 (Orange Only) TEAM-TRAIL-10 WOODY S JUMBO TRAILER DECAL x 32.5 TEAM-TRAIL-B (Blue) TEAM-TRAIL-R (Red) TEAM-TRAIL-G (Green) TEAM-TRAIL-Y (Yellow) SNOW FLAP STRAP KIT MUD-STRAP HAND GRINDING WHEEL (Not Shown) 4 1/2 Black Silicon AGW-4500 CARBIDE GRINDING WHEEL (Not Shown) 1/2 x 6 Green wheel AGW x 6 Green wheel AGW-4100 TRACK MARKER TRAK-MARK SPEC GAUGE ASG-4100 T-NUT PULLER Size ATT /4-20 ATT mm TRACK TENSION TOOL Monitor your track tension, by determining your track deflection, with Woody s Track Tension Tool. Use this tool as part of your regular maintenance schedule for optimum performance. Follow the deflection limit recommendations from the snowmobile manufacturer. Never guess again! TRAK-TOOL 7

8 Runners ATTENTION! ADDITIONAL HOLES IN SKIS MAY BE REQUIRED (All comp bars built to order - Allow 3 days) POLARIS All Steel Ski CPI CPI-6200 CPI-6204 All Composite Ski CPI-6208 CPI-6200-L CPI-6204-L All Composite Ski CPI-6408 CPI ARCTIC CAT Cross Country & Oval Race Bars 10 All Arctic Cat (Composite) CAI-6000 Arctic ZR (Composite) CAI-7008 CAI-7000 YAMAHA Yamaha Composite SKI-DOO Cross Country & Oval Race Bars 6 6 Cross Country & Oval Race Bars CYV IFS Twin Track/Formula CSD CSD-5060 All Flex Ski CSD-6808 CSD Cross Country & Oval Race Bars 14 CSD-5050 CSD-6804 Team Woody s Racer, Joey Fjerstad AFTERMARKET Cross Country & Oval C & A USI SKI Flat Line Race USI Project X POWER MADD Power Madd Ski VINTAGE Drag of 115 USI Carbide CCC-5000 CCU-X301 Runners Runners 10 of 60 USI Carbide No Carbide NPD NPDR-1500 Runners 10 Northstar Ski NSC-6050 Derby Ski CPI-5200 Anderson Ski CSD Runners 4 Sno-X 6 Comp Arctic Cat SXA-4000 CAT-6000 Polaris SXP Ski-Doo SXS-4000 CSD-6000 SNO-X & X-COUNTRY BARS Polaris (Comp) 8 & WPI-1225 Arctic (Comp) 8 & WAT-9975 Arctic Cat C&A SCC-5000 Yamaha (Comp)10, 8 & WYV-6580 Ski-Doo (Flex) 8 & WSD-8250 ACE Square 8 AP AA SQS-5000 AY AS SlyDog Ski SCC-5000 SQS-5000 Curve XS Ski SCC-5000 SQS-5000 Curve XS Ski 8 & SCC-5008 AC Pro Steer Ski 8 & WPI-1300 AP ACE Square 6 AP AA AY AS Ski-Doo (Pilot) 8 & WSD-9500 AS AS Outlaw OUT C & A Pro Ski SCC-5000 SQS C & A Pro Ski SCC-5008 AC C & A Pro Ski SCC AC C & A Mini Ski SCC C & A Mini Ski SCC C & A Mini Ski SCC C & A Mini Ski SCC SLP Powder Pro SLP SLP Powder Pro SLP USI Project X Ski SCU-X AC AP6-1300

9 WEAR WOODY S TROPHY RACE JACKET Offered in sizes S - 2X Size Small Cl14-JKT-TROPHY-S Medium CL14-JKT-TROPHY-M Large CL14-JKT-TROPHY-L XLarge CL14-JKT-TROPHY-XL 2X CL14-JKT-TROPHY-2X Available for delivery in mid September For the complete list of Woody s Wear items, visit More handy products... The Grip-It Tire Screw is the shortest in the Twist line at 13mm / 0.512" long. Don t let the small size fool you; it is made with the same high grade steel and carbide as Woody s larger tire screws. The Grip-It adds traction to footwear, waders, short lug ATV/UTV and motorcycle tires, garden tractors, and bicycles. It can be used in any rubber sole or lug 0.472"+. The Grip-It is a high grade carbon steel, zinc plated hex screw with a carbide insert for durable, reliable traction. The thread is extra coarse to keep the screw secure. The Grip-It can be installed and removed using the Woody's Twist Installation Tool. TWIST GRIP-IT CARBIDE SCREWS Size Qty 13mm 25 WST mm 100 WST GRIP-IT INSTALLATION TOOL (not shown) WST-TOOL-4 TRIANGLE MOTORCYCLE STAND The W shaped Triangle Stand design makes it stable on uneven ground. It is constructed from high-quality carbon steel and zinc plated for rust and corrosion protection. Weighs 1.8 lbs. Made in the USA. TRI-STAND 9

10 Company Information TECHNICAL ASSISTANCE Tech Line: (989) x450. We have experienced technicians to assist you during normal business hours. We also provide technical assistance through the Ask The Experts. WARRANTY RETURNS Call our customer service department for a Return Authorization Number. (989) This Return Authorization Number must be visible on the outside of the box. The product must be inspected by a Woody s technician to determine if the product is defective due to material, quality or workmanship before a final warranty determination is made. Proof of purchase is required. All returns to the manufacturer are for exchange only. Provide an address, phone number and a return shipping address with the returned products. DEALERSHIP Dealers interested in carrying Woody s brand products, accessories or Woody s Wear, please find an official Woody s product distributor in your region or contact Larry Tiede at larry@wiem.com. WOODY S RACER PROGRAM If you are interested in becoming a sponsored racer, fill out the Woody s Racer Sponsorship Application. Important Dates and Information for April 1, Begin accepting applications for the summer and winter race season. May 30, First round of acceptance notifications will be ed. July 1, Race Program participants can begin ordering product. December 1, Application process is closed. No longer accepting applications for the season. May 31, Winter Race Program ends. Your discount code will be deactivated. Racers place your orders through Woody s Online Store. If you have questions call International Engineering & Manufacturing, Inc. and ask to speak with the Race Director or your questions to mike@wiem.com. LIMITED WARRANTY INTERNATIONAL ENGINEERING & MANUFACTURING, INC. (IEM) WARRANTS each product manufactured by it to be free from defects in material and workmanship under use for the purpose for which it is intended. The Company shall not be liable for damage or delays caused by defective materials or workmanship; is limited to the repair or replacement at its factory of defective article or part thereof, which may be returned to the factory, transportation charges prepaid, within one (1) year after delivery to the original purchaser. Proof of purchase is also required. The Company shall be the sole judge of the existence of any defect in the article so returned. No claims for charges incurred in the removal, disassembly or reinstallation of such article shall be allowed. Product manufactured for consumer use on snowmobiles is designed for snow or ice only, use on any other surface voids warranty. This Warranty shall not cover any article which has been misused or neglected or damaged by accident or any article which has been altered outside the Company s factory. The Warranty for studs is void unless the studs are installed with Woody s installation tools, support plates and lock nuts; according to the recommendations set forth in Woody s Instructions and Template Patterns. This Warranty does not cover bending, chipping, flaking or carbide pin breakage or pin loss from stud wear, stud replacement labor or shipping. The Company shall, in no event be liable for consequential damage or contingent liability arising out of any total or partial failure to function of any article manufactured by it or of any equipment on or in which it is used. Failure of a user to give notice to claim as to defect claimed under the provisions of this Warranty within 1 year after delivery to original user, such claim shall constitute a waiver by consumer of all claims with respect to goods and equipment. The above warranty is in lieu of all other warranties, expressed or implied, including but not limited to the implied warranties of merchantability and fitness for a particular purpose. In no event will the company be liable for consequential damages whether or not it has notice of the possibility of any such damages. Follow the Woody s Manufacturer Warranty Returns directions to return any product from International Engineering & Mfg., Inc. Woody s, Team Woody s, Woody s Wear, Traction Master, Snap-Off, Gold Digger, Chisel Tooth, Eliminator, Hooker, Mega-Bite, Twist, Grip-it, ACE, Fat Max, Square Digger, Round Digger, Double Digger, Triangle Digger, Angled Digger, Angled Double Digger, Combo Digger are trademarks and/or trade names of IEM. Traction Master refers to a patented product of IEM and is covered by US Patent No. 5,234,266 and Canadian Patent No. 2,086,186. Snap-Off studs are covered by US Patent No. 5,716,112 and Canadian Patent No. D84,609. Mega-Bite studs are covered by US Patent No. D415,954 and Canada No. D88,613. Wide Body Chisel Tooth studs are covered by US Patent No. D551,544 and Canadian No. 115,499. Angled Digger support plates are covered by US Patent No. 6,609,772B2. Triangle Digger support plates are covered by US Patent No. D