generations of champions Competition Product Catalog

Transcription

1 generations of champions Product Catalog

2 Studs STEEL CHISEL TOOTH TRACTION MASTER 48 studs and lock nuts (1.325 packs contain Big Nuts).750 7mm CAP mm CAP mm CAP mm CAP mm CAP mm CAP /16 CAP /16 CAP /16 CAP-1325 TITANIUM STUDS Chisel Tooth - sold by piece only mm TCL-1067 * Wide Body Chisel Tooth - sold by piece only mm TWB-1067 * * = While supplies last 30 Eliminator - sold by piece only Build to order 45 MODIFIED GOLD DIGGER CARBIDE TRACTION MASTER 48 studs and 48 lock nuts (1.325 & contain Big Nuts).750 7mm GDP-750M.875 7mm GDP-875M.920 7mm GDP-920M mm GDP-100M /16 GDP-105M /16 GDP-107M /16 GDP-117M /16 GDP-132M /16 GDP-145M STEEL CHISEL TOOTH 48 studs and Big Nuts /16 CAP /16 CAP-1860 CHISEL TOOTH FOR CLEATED TRACKS (NOT SHOWN) 48 studs and lock nuts /4-28 CEP-1060 * STEEL CHISEL TOOTH SNAP-OFF STUD 48 studs only.875 1/4-20 CLTX /4-20 CLTX-1000 * mm CLTX mm CLTX-1200 T-NUT STYLE 48 studs only.700 1/4-20 CLT /4-20 CLT /4-20 CLT /4-20 CLT-1000 * mm CLT mm CLT-1200 * = While supplies last 30 ELIMINATOR STEEL TRACTION MASTER 48 studs and lock nuts.700 1/4-28 GEP /4-28 GEP /4-28 GEP /4-28 GEP /4-28 GEP /4-28 GEP mm GEP mm GEP studs with short shoulder for thin belted tracks & lock nuts /4-28 DEP-1000 WIDE BODY STEEL CHISEL TOOTH T-NUT STYLE 48 studs only mm CWB-1060 CHISEL TOOTH HOOKER 48 studs only.800 1/4-20 HCL-8000 Copyright IEM. All rights reserved.

3 30 ELIMINATOR STEEL SNAP-OFF STUD 48 studs only.820 1/4-20 GELX /4-20 GELX /4-20 GELX /4-20 GELX-1000 * /4-20 GELX-1060 *.875 7mm GELX mm GELX mm GELX-1200 * T-NUT STYLE 48 studs only.700 1/4-20 GEL /4-20 GEL /4-20 GEL /4-20 GEL /4-20 GEL /4-20 GEL-1000 * /4-20 GEL-1060 *.875 7mm GEL mm GEL mm GEL mm GEL-1200 * * = While supplies last 40 STEEL HOOKER ELIMINATOR 48 studs only.440 1/4-20 HST /4-20 HST /4-20 HST /4-20 HST /4-20 HEP /4-20 HEP /4-20 HEP-9000 GRAND MASTER PRO 60 MODIFIED 48 studs and 48 lock nuts ( contain Big Nuts) /16 GMPP /16 GMPP /16 GMPP /16 GMPP SNOCROSS Bulk package - 96 ea. of studs & Big Nuts /16 RACE-1860-B 24 & 1000 pc. pkgs available upon request The stud is the correct length for lug tracks that come stock on Ski-Doo, Polaris and Arctic Cat sleds. SNOCROSS 60 MEGA-BITE Standard package - 24 ea. of studs & Big Nuts /16 MEG /16 MEG /16 MEG /16 MEG-1740 Bulk package - 96 ea. of studs & Big Nuts /16 MEG-1325-B /16 MEG-1450-B /16 MEG-1575-B /16 MEG-1740-B 1000 package ea. of studs & Big Nuts /16 MEG-1325-M /16 MEG-1450-M /16 MEG-1575-M /16 MEG-1740-M TRIGGER 48 studs and Big Nuts /16 TRIG /16 TRIG-1630 For studding templates/patterns visit our website at or call our tech line at Malcolm Chartier 5

4 Support Plates 5/16 and 7mm SQUARE DIGGER 7mm Square aluminum support plates Hole QTY 7mm 24 ASW mm 96 ASW-3725-B 7mm 144 ASW-3725-C 7mm 1000 ASW-3725-M 5/16 Square aluminum support plates 5/16 24 ASW /16 96 ASW B 5/ ASW C 5/ ASW M 5/16 ROUND DIGGER ALUMINUM 5/16 Round aluminum support plates Hole QTY 5/16 24 AWA /16 96 AWA-3775-B 5/ AWA-3775-C 5/ AWA-3775-M DOUBLE DIGGER ALUMINUM Hole QTY 7mm 12 ADD mm 48 ADD-3725-B 5/16 12 ADD /16 48 ADD B 5/16 and 7mm COLORED SQUARE DIGGER COLOR 5/16 7MM Green ASW ASW-3730 Red ASW ASW-3740 Blue ASW ASW-3745 Yellow ASW ASW-3750 Black ASW ASW-3760 White ASW ASW-3765 Available in quantities of 24, 96, 144 and 1,000 piece packages. 5/16 COLORED ROUND DIGGER 5/16 Aluminum support plates Color Hole QTY Green 5/16 48 AWA-3780 Red 5/16 48 AWA-3790 Blue 5/16 48 AWA-3795 Yellow 5/16 48 AWA-3800 Black 5/16 48 AWA-3810 White 5/16 48 AWA /16 COLORED DOUBLE DIGGER 5/16 Aluminum support plates Color Hole QTY Green 5/16 48 ADD Red 5/16 48 ADD Blue 5/16 48 ADD Yellow 5/16 48 ADD Black 5/16 48 ADD White 5/16 48 ADD INDEXING TOOL For 5/16 Woody s Square Digger Support Plates SPI-TOOL-5 For 7mm Woody s Square Digger Support Plates SPI-TOOL-7 SHALLOW SOCKET TOOL Woody s developed a unique shallow socket for installing studs that provides the torque to tighten without touching the surface of the support plate. Works ideal with colored support plates. The 5/16 socket is deep enough to install studs up to length. Size 7mm SCW /16 SCW-4505

5 US Patent No. D If using T-nut sytle studs for drag racing with a 7mm Triangle Digger Plate you will need to use a stud length. 7mm ROUND DIGGER DO NOT USE WITH STUDS LONGER THAN Material QTY Steel 24 AWR-3600 Steel 96 AWR-3600-B Steel 1000 AWR-3600-M Aluminum 24 AWA-3700 Aluminum 96 AWA-3700-B Aluminum 1000 AWA-3700-M TRIANGLE DIGGER ALUMINUM Hole QTY 7mm 48 AWT mm 1000 AWT-3725-M 5/16 48 AWT / AWT-3775-M TRIANGLE INDEXING TOOL For both 5/16 and 7mm Woody s Triangle Digger Support Plates use: SPI-TOOL-T BENDER STUD MATE 7mm Material QTY Aluminum 12 AWL-3750 Aluminum 48 AWL-3750-B SINGLE BENDER STUD MATE 7mm Material QTY Aluminum 12 AWL-2700 Aluminum 48 AWL-2700-B DOUBLE DIGGER ALUMINUM ANGLED Hole QTY 7mm 12 ADA mm 48 ADA-3725-B 5/16 12 ADA /16 48 ADA B SINGLE ALUMINUM ANGLED DIGGER 5/16 aluminum angled support plates Hole QTY 5/16 24 ANG /16 96 ANG-3775-B 5/ ANG-3775-C 5/ ANG-3775-M 7mm aluminum angled support plates Hole QTY 7mm 24 ANG mm 96 ANG-3725-B 7mm 144 ANG-3725-C 7mm 1000 ANG-3725-M 7

6 Washers, Nuts & Accessories T-NUTS Size Thread QTY 3/4 1/ ATR /4 1/ ATR-3750-M 1 1/ ATL / ATL-3810-M 1 7mm 48 ATL mm 1000 ATL-3820-M BIG NUT with nylon insert - Aluminum Size Thread QTY.450 5/16 24 ALN /16 96 ALN B.450 5/ ALN M For studs to Size Thread QTY.700 5/16 24 ALN /16 96 ALN B.700 5/ ALN M For studs longer than1.450 TRACK SAVER TOOL 3/4 *While supplies last ATT-4260 For 7/8 Dished T-nuts ATT-3875

7 LOCTITE THREADLOCKER (Not Shown) Size LOC-2900 (wicking) 6 ml LOC-2620 (permanent) 10 ml SHIM WASHERS 48 shims/pkg Material ID-OD-Thickness Alum. 1/4-1/ ASW-3950 Steel 7mm-1/ ASW-4000 LOCK NUTS STEEL Thread QTY 7mm 48 NYL mm 1000 NYL-5000-M 1/4 48 NYL / NYL-5010-M 5/16 48 NYL / NYL-5020-M ALUMINUM 7mm 96 ALN-5050-B 7mm 1000 ALN-5050-M STEEL SHARPENING TOOL Size TOOL-SHARP-3 30 TOOL-SHARP-4 45 TOOL-SHARP-6 60 Replacement Inserts, pkg of 4 TOOL-INSERT-4 TRACK DRLL Universal Track Drill DRIL-UNIV STAR WASHER ID-THICKNESS QTY 1/ HSW mm HSW-4900 WOODY S NEW TRAILER DECAL Team Woody s Trailer Decal 9 1/8 x 23 (Orange Only) HAND GRINDING WHEEL (Not Shown) 4 1/2 Black Silicon AGW-4500 CARBIDE GRINDING WHEEL (Not Shown) 1/2 x 6 Green wheel AGW x 6 Green wheel AGW-4100 SPEC GAUGE ASG-4100 T-NUT PULLER Size ATT /4-20 ATT mm TRACK TENSION TOOL Monitor your track tension, by determining your track deflection, with Woody s Track Tension Tool. Use this tool as part of your regular maintenance schedule for optimum performance. Follow the deflection limit recommendations from the snowmobile manufacturer. Never guess again! TRAK-TOOL 9

8 Runners ATTENTION! ADDITIONAL HOLES IN SKIS MAY BE REQUIRED POLARIS Cross Country & Oval Race Bars 8 14 All Composite Ski CPI-6208 CPI-6200 CPI-6204 All Composite Ski CPI-6408 CPI-6400 CPI-6404 All Composite Ski CPI-6608 CPI-6600 CPI-6604 ARCTIC CAT Cross Country & Oval Race Bars 8 14 All Arctic Cat (Composite) CAI-6108 CAI-6000 CAI-6050 Arctic ZR (Composite) CAI-7008 CAI-7000 CAI-7050 YAMAHA RX-1/ER/Mtn&Viper Mtn Cross Country & Oval Race Bars CYV PJ Wanderscheid SKI DOO Cross Country & Oval Race Bars 8 14 Formula Dlx/Z III/III LT CSD-6700 CSD-6704 Mach 1/Z LT/Z CSD-6700 CSD-6704 IFS Twin Track CSD-5060 CSD-5050 All Composite Ski CSD-6808 CSD-6800 CSD-6804 USI SKI Flat Line Race HOLLOW Drag Runners 3 of 115 USI-1070 of 60 USI-1060 Runners Hollow Square Hollow Square 8 Carbide Carbide C & A Ultra Pro Ski HSCC-5000 SLP Powder Pro HSLP Outlaw HOUT POWER MADD Power Madd Ski Runners 3 Carbide No Carbide NPD NPD-1500 SNOCROSS SnoCross Bars Polaris (Composite) SCP-6200 Polaris (Composite) SCP-6400 Polaris (Pro-X 440) SCP-6600 Arctic Cat (Composite) SCA-6000 Arctic ZR (Composite) SCA-7000 Arctic ZR (Comp) SCA-7008 Arctic Cat C&A SCC-5000 Outlaw OUT-4608 Yamaha (RX-1/VMax/Phazer/Viper) SCY-6580 Ski-Doo (Composite) 1997 SCS-6700* Ski-Doo (Flex) SCS-6800 Ski-Doo (Pilot) WSD-9500 C & A Pro Ski SCC-5000 C & A Pro Ski SCC-5008 SLP Powder Pro SLP USI Project X Ski SCU-X301 *WHILE SUPPLIES LAST

9 Company Information CONTACT US 8:00 a.m. to 4:30 p.m. (ET), Monday through Friday. Check with your Woody s product supplier for availability. If you need assistance in locating a supplier near you, log onto for a FREE dealer locator. You may also contact us at (989) , fax (989) , woodys@wiem.com. WOODY S MANUFACTURER WARRANTY RETURNS Call our customer service department for a Return Authorization Number. This number must be visible on the outside of the box. At your expense ship the product to International Engineering & Mfg., Inc. The product must be inspected by a Woody s technician to determine if the product is defective due to material, quality or workmanship before a final warranty determination is made. Proof of purchase is required. All returns to the manufacturer are for exchange only. TECHNICAL ASSISTANCE We have experienced technicians to assist you from 8:00 a.m. to 4:00 p.m. (ET), Monday through Friday. Phone: (989) Fax: (989) woodys@wiem.com DEALERSHIP Dealers interested in handling Woody s Traction and Control products, please contact us for a Woody s product distributor near your location or log onto Increase traffic to your dealership by filling out a Woody s Dealer Survey at WOODY S WEAR Contact your local Woody s dealer to purchase your Woody s Wear items. To find a Woody s dealer near you log onto for a FREE dealer locator. WOODY S RACER PROGRAM Get your Woody s Race Application at If you have questions call International Engineering & Manufacturing, Inc. and ask to speak with the Racer Program Coordinator. LIMITED WARRANTY INTERNATIONAL ENGINEERING & MANUFACTURING, INC. (IEM) WARRANTS each product manufactured by it to be free from defects in material and workmanship under use for the purpose for which it is intended. The Company shall not be liable for damage or delays caused by defective materials or workmanship; is limited to the repair or replacement at its factory of defective article or part thereof, which may be returned to the factory, transportation charges prepaid, within one (1) year after delivery to the original purchaser. Proof of purchase is also required. The Company shall be the sole judge of the existence of any defect in the article so returned. No claims for charges incurred in the removal, disassembly or reinstallation of such article shall be allowed. Product manufactured for consumer use on snowmobiles is designed for snow or ice only, use on any other surface voids warranty. This Warranty shall not cover any article which has been misused or neglected or damaged by accident or any article which has been altered outside the Company s factory. The Warranty for studs is void unless the studs are installed with Woody s installation tools, support plates and lock nuts; according to the recommendations set forth in Woody s Instructions and Template Patterns. This Warranty does not cover bending, chipping, flaking or carbide pin breakage or pin loss from stud wear, stud replacement labor or shipping. The Company shall, in no event be liable for consequential damage or contingent liability arising out of any total or partial failure to function of any article manufactured by it or of any equipment on or in which it is used. Failure of a user to give notice to claim as to defect claimed under the provisions of this Warranty within 1 year after delivery to original user, such claim shall constitute a waiver by consumer of all claims with respect to goods and equipment. The above warranty is in lieu of all other warranties, expressed or implied, including but not limited to the implied warranties of merchantability and fitness for a particular purpose. In no event will the company be liable for consequential damages whether or not it has notice of the possibility of any such damages. Follow the Woody s Manufacturer Warranty Returns directions to return any product from International Engineering & Mfg., Inc. Woody s, Team Woody s, Woody s Wear, Traction Master, Snap-Off, Gold Digger, Chisel Tooth, Eliminator, Hooker, Mega-Bite, Square Digger, Round Digger, Double Digger, Triangle Digger, Angled Digger, Angled Double Digger are trademarks and/or trade names of IEM.Traction Master refers to a patented product of IEM and is covered by US Patent No. 5,234,266 and Canadian Patent No. 2,086,186. Snap-Off studs are covered by US Patent No. 5,716,112 and Canadian Patent No. D84,609. Mega-Bite studs are covered by US Patent No. D415,954 and Canada No. D88,613. Wide Body Chisel Tooth studs are covered by US Patent No. D551,544 and Canadian No. 115,499. Angled Digger support plates are covered by US Patent No. 6,609,772B2. Triangle Digger support plates are covered by US Patent No. D Loctite Threadlocker is a registered trademark of the Loctite Corporation. 11