Table of contents. Windsurfing

Transcription

1

2 Table of contents Windsurfing Page Sails 3-19 Boards Masts Booms Sail battens & parts Mast bases, extensions Boom parts and accessories Harnesses Harness lines and parts Fins Footstraps and board accessories Accessories Board Bags 85-91

3

4 Windsurfing Sails Program In Season / Anytime Program Air-X Sails Buy 5 sails, less 10% Buy 10 sails, less 12% Buy 20 sails, less 15% Special program may be used to reach your quantity $ discount, but no further discounts apply. 4

5 Concept: Freestyle This sail bridges the gap between freestyle and freeride and power wave sailing. It offers a lot of range on outhaul adjustment so you can tune it for your preferred feel. This sail continues to be the best value in a 100% grid model. The sail has the soft feel of the Charge, but lots of power like the Phantom. Construction: This model features 100% grid construction, a new raised stainless steel 6-1 pulley with oversized rollers, and insignia tape reinforcing. Rod battens are used for this range. These are some of the lightest weight hassle-free sails available. 7.7 uses continuous tube battens, not rods. Thermo-formed base pad. Part # Item Luff Boom Battens Cams Mast Weight (kg) Retail AirX 332* $ AirX 355* / $ AirX 378* / $ AirX 392* / $ AirX 416* / $ AirX / $ AirX / $ AirX /21 or 460/ $ AirX / $514 Rig Packages All rig packages come complete with sail, Epic Gear 60% carbon mast, Aeron boom, uphaul, outhaul, Epic Gear RDM base and extension. Part # Item Retail AirX Complete Rig $ AirX Complete Rig $ AirX Complete Rig $ AirX Complete Rig $ AirX Complete Rig $ AirX Complete Rig $ AirX Complete Rig $ AirX Complete Rig $ AirX Complete Rig $1099 *Denotes adjustable head 5

6 Concept: Side shore wave The Charge is Aerotech's down-the-line wave sail. This model has the ability to hold good power when needed but remains neutral for transitions or wave riding. The Charge features a 'drop-clew' design which allows for shorter boom lengths and improved handling. Aerotech was the first to offer a 100% grid sail and the Charge continues that tradition. Lots of color gives this sail a real look at me appeal. It is one of the most durable wave sails ever produced using triple throw stitch seam construction. Other features include; an anti-chafe bumper in the head, new raised stainless steel 6-1 pulley with oversized rollers, thermo-formed base pad and interactive rigging guide. All battens are rods. For 2017 the 5.5 and down are now 4 battens. This reduces weight and gives a softer feel for improved down the line wave sailing. Part # Item Luff Boom Battens Cams Mast Weight (kg) Retail Charge 355* / $ Charge 370* / $ Charge 395* / $ Charge 400* / $ Charge 410* / $ Charge 425* / $ Charge 430* / $ Charge 450* / $ Charge 455* / $614 6 *Denotes adjustable head

7 Concept: on-shore wave sail With its leech cutout just above the boom this sail offers great handling due to the shorter boom length. This sail is a wave sail first, but due to its stability and power it crosses over to freeride and bump-andjump use quite well. The Phantom's ultra durable 100% grid construction and huge range make this sail one of Aerotech's most popular models. Construction: This model features a 100% grid construction for the ultimate in durability and UV resistance. Other features include; an anti-chafe bumper in the head, new raised stainless steel 6-1 pulley with oversized rollers, a thermo-formed base pad and interactive rigging guide. Durable rod battens are used in this model. Sizes 5.0 and larger have an upper panel made of UDL04/technora. This lightens up the weight in these larger sizes. Part # Item Luff Boom Battens Cams Mast Weight (kg) Retail Phantom 370* / $ Phantom 386* / $ Phantom 405* / $ Phantom 411* / $ Phantom 426* / $ Phantom 438* / $ Phantom / $ Phantom / $699 *Denotes adjustable head 7

8 Concept: freeride The FreeSpeed is a no-cam slalom sail designed for fast freeriding and low end performance. It s built tough and has a very powerful shape. With a combination of vertical and horizontal seam shaping, this sail allows maximum performance in a no-cam design. It is designed for those who want to go fast with a no hassle high-performance feel. We ve used bold color combinations to make this sail get noticed on the beach and the water. Construction: This model features 100% grid construction for the ultimate in durability and UV resistance. Other features include a raised stainless steel 6-1 pulley with oversized rollers, and insignia tape reinforcing. Rod battens are used in this sail. Thermo-formed base pad. For 2017 the Free Speed has more power down low and a more progressive twist pattern. The new colors will stand out on the water as well. Part # Item Luff Boom Battens Cams Mast Weight (kg) Retail Freespeed 420* / $ Freespeed 445* / $ Freespeed 465* / $ Freespeed / $ Freespeed / $ Freespeed / $699 8 *Denotes adjustable head

9 Concept: freeride The Rapid Fire was the first slalom sail to offer 100% grid construction and that tradition continues. This twin cam slalom series features one cam below the boom and one above. The Rapid Fire is all about power. Its double vertical luff panel as well as slightly wider sleeve improves power and gives this sail a 'race sail' feel. Construction: This model features 100% grid construction for the ultimate in durability and UV resistance. Other features include; micro roller cams, a raised stainless steel 6-1 pulley with oversized rollers, and insignia tape reinforcing. A mixture of rod and tubular battens are used in this sail. Thermo-formed base pad. Sizes 7.0 and larger have an upper panel made of UDL04/technora that lightens up the weight in the larger sizes. Part # Item Luff Boom Battens Cams Mast Weight (kg) Retail Rapid Fire / $ Rapid Fire / $ Rapid Fire / $ Rapid Fire / $ Rapid Fire / $ Rapid Fire / $ Rapid Fire / $ Rapid Fire / $837 *Denotes adjustable head 9

10 Dagger Concept: longboard racing The Dagger is Aerotech s longboard racing sail. This model is built of 100% grid construction. With longboards making a huge comeback into the market, Aerotech has just the motor that these boards need. This sail features a full powerful shape with firm leech tension. Moderate sleeve width and camber inducers give it maximum range and speed. Construction: 100% grid, other features include; roller bearing camber inducers, a thermoformed base pad, a raised stainless steel 6-1 pulley with oversized rollers, and an interactive rigging guide. New for 2017 is a whole new Dagger series featuring a technora top panel for reduced weight and a slightly shorter clew. Part # Item Luff Boom Battens Cams Mast Weight (kg) Retail Dagger / $ Dagger / $ Dagger / $891 10

11 Bag rolled down for sail use only Bag with top rolled down secured with bungee and button. This allows the bag to be used to hold the sail with the sail folded in half horizontaly and rolled from clew. Bungee and button on sail so sail can be rolled with boom attached Sail size and dimensions printed on bottom of sleeve The windsup is all about bringing windsurfing back to a simpler time with a few modern touches. The sail can go from the roof of your car to the water in under a minute. Just pull the mast bag off, fold the boom down and roll the sail out. Attach the outhaul and you're ready to go! With its vertical battens, this sail offers the convenience of keeping the sail on the mast but still maintains a modern outline with a fat head and increased area below the boom. Pop this on an SUP or any longboard and remember how fun windsurfing can be in 5 to 10 knots of wind. Construction: durable dacron with vinyl window Rigging instructions can be viewed at: Bag unrolled for storage of mast and sail wih boom attached. Button on sail bag with bungee loop on back side Zipper on bag extends to top of boom opening so boom can stay attached to mast with sail in the bag. Bag has double plastic zipper cars Pull cord at bottom of bag Part # Item Luff Boom Battens Cams Mast Weight (kg) Retail WindSUP 290* Vertical $175 O WindSUP 310* vertical $215 O WindSUP 330* vertical $230 O WindSUP 395* vertical $255 O WindSUP vertical $305 Rig Packages All rig packages come complete with sail, mast, boom, uphaul, outhaul, base and extension. Part # Item Retail WindSUP Complete Rig $425 O WindSUP Complete Rig $449 O WindSUP Complete Rig $474 O WindSUP Complete Rig $519 O WindSUP Complete Rig $549 *Denotes adjustable head 11

12 Future Sails Concept: The Future sail is designed for a child or adult s first few days on the water but can stay with them as they advance. The sail is built in the Aerotech tradition using all grid construction to offer both durability and light weight. The reduced luff curve allows for easy rigging and improved rider feedback resulting in rapid skills improvement. Part # Item Luff Boom Battens Cams Mast Weight (kg) Retail Future 202* $ Future 243* $ Future 285* $ Future 325* $ Future 328* $ Future 441* $ Future 447* $399 *Denotes adjustable head Rig Packages All rig packages come complete with sail, mast, boom, uphaul, outhaul, base and extension. Part # Item Retail O Future Complete Rig $384 O Future Complete Rig $406 O Future Complete Rig $438 O Future Complete Rig $465 O Future Complete Rig $500 O Future Complete Rig $628 O Future Complete Rig $694 12

13 Concept: The Action continues as Aerotech s Dacron freeride sail. This sail is ideal when maximum durability is crucial. The all-dacron construction and vinyl window make this sail perfect for rental and school use. With its full battens and slalom cut, this model will perform nicely for your recreational customer or resort guest. Part # Item Luff Boom Battens Cams Mast Weight (kg) Retail Action 220* $ Action 250* $ Action 280* $ Action 310* $175 O Action 375* $245 O Action 405* $260 O Action 440* $285 O Action 450* $299 *Denotes adjustable head Rig Packages All rig packages come complete with sail, mast, boom, uphaul, outhaul, base and extension. Part # Item Retail Action Complete Rig $ Action Complete Rig $ Action Complete Rig $ Action Complete Rig $438 O Action Complete Rig $508 O Action Complete Rig $533 O Action Complete Rig $565 O Action Complete Rig $580 13

14 Kona Sails Concept: long board race The Kona is a no-cam power slalom sail. It is your best choice for a sail designed specifically for cruising on longboards or big freeride stuff. With its tight leech and fuller shape, this model allows the rider to be powered up on a smaller sail. The reduced luff curve allows for hassle-free rigging. With its unique design, it can be tuned for non-planing conditions with a tight leech or pretty floppy for the overpowering stuff. Nice and bright for maximum wow. The Kona is the choice for the Kona One one-design class. Construction: monofilm and x-ply Part # Item Luff Boom Mast Color Max Rider Weight (kg) Retail O Kona Red 60 $479 O Kona Blue 65 $551 O Kona Yellow 65 $ Kona Blue $592 O Kona Green $603 O Kona Red 85+ $638 O Kona Orange 98+ $685 Rig Packages All rig packages come complete with sail, 75% carbon mast, Aeron or Kona boom, uphaul, outhaul, base and extension. Part # Item Retail O Kona Complete Rig $1094 O Kona Complete Rig $1136 O Kona Complete Rig $ Kona Complete Rig $1197 O Kona Complete Rig $1249 O Kona Complete Rig $ Kona Complete Rig $

15 Kona Windsup The new Kona Wind Sup sail is all about simplicity. This sail features FBT (flip batten technology). This concept allows the benefit of full length battens with the simplicity of a soft sail. The 3 full length battens are secured to the sail body with velcro. They can quickly be flipped vertically which allows the sail to stay on the mast while rolled up with the boom still attached. The sail and mast can be covered with the included mast bag for easy storage on top of your board. This allows rigging time to be reduced to just 1 minute. Now you have a sail that has full batten performance with soft sail convenience. Built of all dacron with a vinyl window the sail will last even in a harsh environment. Part # Item Luff Boom Mast Retail WindSUP Sail /21 $ WindSUP Sail /21 $299 Rig Packages All rig packages come complete with sail, mast, boom, uphaul, outhaul, base and extension. Part # Item Retail WindSUP Rig $ WindSUP Rig $699 15

16 Kona Active WindSup Package Kona Active with Kona Windsup sail rig and golf bag. With a 3-piece mast this entire package fits in one bag. This package was meant to travel. Kona WindSup Kona WindSUP rig is all about making it easy, from rigging to sailing and transporting. The WindSUP rig has been developed specifically for anyone that wants to enjoy easy comfortable windsurfing in light conditions. Folded, the rig package fits into the trunk of the car or in a golf bag. Thanks to the fact that the sail is fully battened, it has a very good aerodynamic shape. The big innovation is that the battens are removable enabling the sail to be folded into a small package. The sail is made of dacron which is very durable and well suited for wind supping. It comes in two sizes, 4.8 sqm and 5.8 sqm, the smaller best suited for light sailors and the bigger for heavier or more experienced sailors. Despite being an innovation it is still very affordable and price competitive. Kona WindSUP rigs make the step into windsurfing easy. Part # Item Retail WindSup Rig with Active 10.6 $ WindSup Rig with Active 10.6 $ WindSup Rig with Active 10.8 $ WindSup Rig with Active 10.8 $ WindSup Rig with Active 11.2 $ WindSup Rig with Active 11.2 $

17 Kona Spark When the Kona Windsurfing team began the development of a new school sail line the ambition was clear create the best school sail ever. To achieve the goal Tinho Dornellas was given the responsibility to head the development process, putting his 30 years of professional windsurfing experience into the process. Previously this season his latest school board design Kona Hula, was successfully introduced. The sail design is built upon Tinho s unique concept of balanced power. Kona Spark has a unique sail plan shape. The goal is to shorten the mast and produce as much power as possible for each sail size, targeting each sailor is weight and size with the proper sail so they can experience balanced power as soon as possible. It makes the board surge in speed without any effort. It means that performance and enjoyment goes hand in hand and ultimately results in a fast learning curve. It is made exclusively of x-ply which makes it stronger and lighter. Part # Item Luff Boom Battens Cams Mast Weight (kg) Retail Spark * $ Spark * $ Spark * $ Spark * $ Spark * $ Spark * $ Spark * $ Spark * $355 Rig Packages All rig packages come complete with sail, mast, boom, uphaul, outhaul, base and extension. Part # Item Retail Spark 1.5 rig package $ Spark 2.0 rig package $ Spark 2.5 rig package $ Spark 3.0 rig package $ Spark 3.5 rig package $ Spark 4.0 rig package $ Spark 4.5 rig package $ Spark 5.0 rig package $649 17

18 Kona Summer This is the perfect choice for the beginner and for young people. It is a very light sail and rig, which is of great importance to the beginner. The construction is very reliable making it easy to handle and the perfect entry level sail. Together with the StepOne, it constitutes an unbeatable combination of price and performance making it an attractive alternative to families, clubs and schools. It is designed for easy use but also for individuals or windsurfing schools with clients eager to try racing. The Summer sail line is made exclusively of x-ply which distinguishes it from comparable sails traditionally made in monofilm. Part # Item Luff Boom Battens Cams Mast Weight (kg) Retail Kona Summer $ Kona Summer $ Kona Summer $474 Rig Packages All rig packages come complete with sail, mast, boom, uphaul, outhaul, base and extension. Part # Item Retail Kona Summer 5.8 rig package $ Kona Summer 6.6 rig package $ Kona Saummer 7.4 rig package $941 18

19 Sailboat Sails Sunfish Hobie Wave Hobie 16 Optimist This is a collection of high quality replacement sailboat sails at an economical price. These sails are made of durable 4 ounce dacron and are available in several attractive multi-color combinations. Note that while these are great replacement sails, they are not authorized for class racing. They are perfect for clubs, camps, or for the average weekend sailor. The quality of these sails is equal to and in many cases superior to the stock sails that come with these boats. Features include oversized stainless steel grommets set in 3-ply edge reinforcing. All seams are glued and triple throw stitched. Part # Item Retail O-090 Sunfish Sail $236 O-091 H-16 Mainsail W/Battens $704 O-092 H-16 Jib $319 O-093 Hobie Wave Mainsail W/Battens $564 O-094 Hobie Wave Jib $195 O-095 Optimist $179 19

20 20

21 X-Wave The generations of X-wave are built of an exclusive high technology material incorporating extensive use of Carbon & wood technology. All boards come with CNC fins especially developed for fast wave boards. With a straighter leading edge these fins provide top control in high speed turns. Ideal in ON SHORE to side shore conditions Versatile boards in tri fins or single depending on sailing conditions Quick on the plane in all conditions High performance in European condition, from side shore to on-shore Versatile board, FREE WAVE in single fin mode or pure wave in tri fin mode Equipped with 2 G10 CNC fins (twin fins) and 1 medium center G10 CNC fin in tri fin mode Equipped with 1 large center fin and 2 cover box in single fin mode DDSA (Double density shock absorber) 3 footstraps Moulded semi-custom Custom finish CNC shape EPS Carbon Biaxial 160gr construction on 100 kg/ m3 PVC deck & bottom Part # Model Size Vol Weight (kg) Fin Sail Size Retail X-Wave x & 19cm US Box cm mini tuttle $ X-Wave x & 21cm US Box cm mini tuttle $ X-Wave x & 23cm US Box cm mini tuttle $ X-Wave x & 25cm US Box cm mini tuttle $ X-Wave x & 26cm US Box cm mini tuttle $ X-Wave x & 26cm US Box cm mini tuttle $

22 SALT The SALT series are a new generation of wave boards, combining speed and control with amazing planing ability. The extra length of the shape combined with a fairly narrow width and a straight outline in the middle section will allow for long bottom turns at full speed with perfect control and stability. These boards are stellar on the cut backs as well. The SALT will turn really sharp and pivot instantly due to the square tail and pivot point on the back foot. The board has no need for side fins and therefore no extra drag to get on a plane. The Salt series also has great pointing and jumping abilities. Available in 3 sizes this new board range will come in one unique PRO AM construction shaped using a CNC process. Ideal in side to side on shore conditions Versatile boards in tri fins or single depending on sailing conditions Single fin DDSA (Double density shock absorber) 3 footstraps Custom construction CNC shape EPS Carbon Biaxial 160gr construction on 100 kg/m3 PVC deck and bottom Part # Model Size Vol Weight (kg) Fin Sail Size Retail Salt x TBA 20.5cm US Box $ Salt x TBA 21.5cm US Box $ Salt x TBA 23cm US Box $

23 Wave 10 5 & 11 5 The 10 5 is a genuine wave riding longboard, performing top and bottom turns as aggressively as a shortboard. The board will extend time on the water for sailors of all skill levels. Without compromising the thrill and challenge of pure wave riding, the 10 5 makes it a lot easier and accessible for everyone. The 11 5 is a big board but still capable of executing instant turns. It is also responsive and easy to control by foot steering and rig positioning. This board has a light, playful feel. It has excellent tracking upwind which makes this wave oriented longboard a truly unique concept. Quick on the plane in all conditions Outstanding to cross over white water High performance in light wind side shore Versatile board, FREE move in single fin mode or pure wave in tri fin mode Equipped with 2 FCS fins (twin fins) and 1 medium center G10 CNC fin in tri fin mode Equipped with 1 large center fin in single fin mode DDSA (Double density shock absorber) 4 footstraps Moulded semi-custom Custom finish CNC shape EPS Carbon Biaxial 160gr construction on 100 kg/m3 PVC deck and bottom, multiple structural re-inforcement on the rail Part # Model Size Vol Weight (kg) Fin Sail Size Retail Longboard x cm US box + 2 9cm FCS $ Longboard x cm US box + 2 9cm FCS $

24 Cross Silver The Silver line is built out the best construction with PVC and bi-axial glass full wrap. This technology brings new perspective for centers and sailors looking for the ultimate durable board at a fair price. With a proven shape the Cross Silver will please all sailors looking for high end performance. Ideal in flat water freeride conditions and choppy, strong wind conditions Slight Vee on the bottom and straight rocker line for early planning Versatile board for all wind conditions and choppy, fast and comfortable Equiped with G10 CNC fin DDSA (Double density shock absorber) 4 footstraps Moulded semi-custom FibreGlass Biaxial 160gr construction on 100 kg/m3 PVC deck and bottom, multiple structural re-inforcement on the rail Part # Model Size Vol Weight (kg) Fin Sail Size Retail Cross Silver x cm Power Box $ Cross Silver x cm Power Box $ Cross Silver x cm Power Box $ Cross Silver x cm Power Box $

25 Cross Carbon Pro The carbon versions of the Cross boards brings the range to a new level. This hi tech construction combined with a new CNC fin design allows performance and comfort, ensuring that this proven shape is the perfect tool, even for the most demanding sailors. Ideal in Bump & Jump conditions Slight Vee on the bottom and straight rocker line for early planing Versatile board for all wind conditions Equipped with G10 CNC fin DDSA (Double density shock absorber) 4 footstraps Moulded semi-custom Custom finish Carbon Biaxial 160gr construction on 100 kg/m3 PVC deck and bottom, multiple structural re-inforcement on the rail Part # Model Size Vol Weight (kg) Fin Sail Size Retail Cross Carbon x cm Power Box $ Cross Carbon x cm Power Box $ Cross Carbon x cm Power Box $ Cross Carbon x cm Power Box $

26 X Move Pro-Am Based on the R&D of the Xcross, the new Xmove range will come in 3 sizes 108, 119, 138 with a fairly narrower and straighter outline versus the Xcross. Ideal in flat water freeride conditions Really fast early planing in all conditions because of a straight rocker line and a Vee under mast foot. Board for all wind conditions and choppy conditions, really easy to handle Amazing ability and directional with its Vee, easy to maneuver despite its width. Really fast in straight line, able to compete againstfree slalom boards when conditions become tough. Equipped with G10 CNC fin DDSA (Double density shock absorber) 4 footstraps Moulded semi-custom Custom finish CONSTRUCTION : PVC 80 kg/m3 Fiber glass, multiple carbon structural reinforcement on deck, bottom and rail Part # Model Size Vol Weight (kg) Fin Sail Size Retail X Move 108 Pro-Am 235 x G10 CNC 34 cm Tuttle $ X Move 119 Pro-Am 239 x G10 CNC 38 cm Tuttle $ X Move 138 Pro-Am 239 x G10 CNC 40 cm Tuttle $

27 S Line Pro-Am The S line is a new board range for sailors looking for high end performance associated with great ease of use. The S line emphasis is on instant planing, high speed & easy maneuvers. The volume distribution and thickness are designed for sailors looking for an increase of volume combined with a fairly narrow width. As a result of the amazing experience of the RS line the S Line Pro-Am will offer high end performance with a great mix of ability in maneuvers due to a deep VEE under the mast foot. The S line comes with top quality footstraps as well as a CNC fin designed by our shaper Jean-Marie Guiriec. Ideal in flat water freeride & freeslalom conditions Really fast early planning in all conditions because of a straight rocker line and a Vee under mast foot. Really fast in straight line, able to compete against slalom boards. Outstanding acceleration with the new Torro tail and recess while keeping perfect control Equipped with G10 CNC fin DDSA (Double density shock absorber) 4 footstraps Molded semi-custom Fiber glass Custom finish CONSTRUCTION : PVC 80 kg/m3 Fiber glass, multiple carbon structural reinforcement on deck, bottom and rail Part # Model Size Vol Weight (kg) Fin Sail Size Retail S3 235 x G10 CNC 40 cm Tuttle $ S4 235 x G10 CNC 46 cm Tuttle $ S5 250 x G10 CNC 48 cm Tuttle $ S6 232 x G10 CNC 52 cm Tuttle $

28 Nano The NANO line is based on our previous best board shapes, built in the AST technology. The NANO boards offer performance + price for any sailor or center. A lot of board for a reasonable price. Ideal in flat water freeride conditions Attractive price Early planing abilities Board suitable for all levels from beginner to confirmed Equipped with molded fin (Nano 125; 135; 155) Equipped with plastic fin (Nano 175; 205) Equipped with Allgaier Dagger board (Nano 175; 205) 4 footstraps Moulded, AST One shot. Fiberglass & matt fiber construction covered with ASA skin on deck and bottom Part # Model Size Vol Weight (kg) Fin Sail Size Retail Nano x cm Powerbox $ Nano x cm Powerbox $ Nano x cm Powerbox $ Nano 155D 255 x cm Powerbox + Dagger Board $ Nano x cm Powerbox + Daggerboard $ Nano x cm Powerbox + Daggerboard $

29 Link The Link series is ideal for the first time windsurfer yet offers enough performance for advancement into that intermediate stage. These are the same shapes as our standard Wind Sup series but built with a full EVA deck pad and very durable construction. These Wind Sup boards work well with a paddle or sail which allows for lots of water time. The Link series is also ideal for school use. The boards are high volume and stable but not too wide so they still offer great feedback to the new sailor. Ideal for Windsurf schools and Centers Ideal in flat water freeride conditions Attractive price lateral and directional stability Board suitable for all, from beginner to confirmed Equipped with moulded fin and Dagger board 4 footstraps Moulded, AST One shot. Fiberglass & matt fiber construction covered with ASA skin on deck and bottom Part # Model Size Vol Weight (kg) Fin Sail Size Retail Link 10 WindsUP 305 x cm Powerbox + Daggerboard $ Link 11 8 WindsUP 360 x cm Powerbox + Daggerboard $ Link M 280 x cm Powerbox + Daggerboard $ Link L 300 x cm Powerbox + Daggerboard $

30 WindSUP Ride 8 11 The Windsup RIDE features the generation of outline that optimizes volume distribution, fairly straight on the outline thru the middle section with a clear break on the back foot for sharp carving The Ride is fast on the plane and quick in planing mode, for SUPer the deck concave and S rail will give enough stability for paddling Best in 1 to 3 meter waves Best for light weight Advanced to Expert in SUP mode Light wind wave board for Windsurfer Optimized S rail work to decrease rail thickness and maximize the deck flat surface for better stability and optimize the paddle mode Advanced to Expert SUPer, take away around 40 to 60 kg of body weight from the board volume Example: 110 liters - 50 kg= Max body weight of 60 kg (+ 10 kg for expert) Windsurfer will enjoy using board in single fin mode Custom construction CNC shape EPS Carbon Biaxial 160gr construction on 100 kg/m3 PVC deck and bottom Part # Model Size Vol Weight (kg) Fin Sail Size Retail WindSUP 8 11 Ride 272 x TBA 25cm US Box + 2 x FCS TBA $

31 WindSUP 9 2 & 10 2 An evolution of the former Curve line or previous Kona waves, these 2 models are the perfect hybrid boards to sail in all wave conditions. Built in high technolgy either Bamboo or Carbon, the 9 2 & 10 2 will also be the perfect SUP boards with a specially designed deck plan. Enjoy a new way of windsurfing. Best in 1 to 2 meter waves Ideal SUP and Windsurf as a first approach in the waves Easy learning Windsurf and SUP Fit to all body weight Optimized S rail work to decrease rail thickness and maximize the deck flat surface for better stability and optimize the paddle mode Bi-axial Carbon 160gr on PVC 100/kg/m3 Bamboo construction on fiber glass and combination matt ASA Construction on fiber glass and combination matt Part # Model Width Volume Weight(kg) Fin Retail WindSUP 9 2 AST cm US box + FCS sidebites $ WindSUP 9 2 Wood cm US box + FCS sidebites $ WindSUP 9 2 Carbon cm US box + FCS sidebites $ WindSUP 10 2 AST cm US box + FCS sidebites $ WindSUP 10 2 Wood cm US box + FCS sidebites $ WindSUP 10 2 Carbon TBA 12.5cm US box + FCS sidebites $

32 WindSUP 10 & 11 8 Downsized from the 11 8, the 10 is the ideal board on which to learn windsurf or SUP. The step tail (an Exocet trademark) is integrated into the swallow tail. This feature allows the board to take off and turn perfectly in SUP mode while still giving you the choice of windsurfing mode. The dagger option will give plenty of choices in any wind conditions. We have added several inserts on the nose deck in order to attach a net for gear or life jacket storage. Ideal SUP and Windsurf as a first approach in the waves Ideal SUP cruising and Freeride windsurf Easy learning Windsurf and SUP Fit to all body weight Rail and deck plan optimized for Windsurf & SUP Bi-axial Carbon 160gr on PVC 100/kg/m3 Bamboo construction on fiber glass and combination matt ASA Construction on fiber glass and combination matt Part # Model Width Volume Weight(kg) Fin Retail WindSUP 10 Wood cm Powerbox + 61cm Daggerboard $ WindSUP 10 AST cm Powerbox + 61cm Daggerboard $1599 O-776 WindSUP 11 8 Wood cm Powerbox + 61cm Daggerboard $1999 O-775 WindSUP 11 8 AST cm Powerbox + 61cm Daggerboard $

33 RS Slalom Race The RS 2, 3 & 4 have a shape featuring a straighter outline between the front and back footstraps and a narrower tail to improve top speed. RS 6 and RS 8 has a rocker line and VEE to release the board and give it better acceleration and top speed. The whole board range has a good amount of VEE beneath the mast foot to provide maximum release in gusty winds. The increased VEE also offers good upwind abilities in all conditions. With its carbon construction, the RS combines strength & stiffness with super light weight, helping to ensure that this board is truly a racing beast that will bring you to maximum velocity in an instant. Ideal in race and slalom conditions Really fast early planing in all conditions. Optimized bottom for maximum speed. Bottom cut out to release the board in low speed. DDSA (Double density shock absorber) 4 footstraps Moulded semi-custom Custom finish CARBON Version: Carbon Biaxial 160gr construction on 80 kg/m3 PVC deck and bottom, multiple structural reinforcement on the rail3 Part # Model Size Vol Weight (kg) Fin Sail Size Retail RS2 235 x Tuttle (no fin) $ RS3 235 x Tuttle (no fin) $ RS4 235 x Tuttle (no fin) $ RS6 230 x Deep Tuttle (no fin) $ RS8 260 x Deep Tuttle (no fin) $

34 RS Formula, 380 & D2 RS Formula - Exocets formula board is both fast and forgiving to sail. This formula board offers the ultimate in lightwind planing. RS D2 - The D2 is a combination of a raceboard and a D2 all rolled into a rangy light wind machine. With a wave piercing bow and planing back section, you get the best of both worlds. RS Elite The 380 Elite is a very refined raceboard. This board is capable of winning in any fleet. Finishing first in the womens fleet and third in the mens fleet in the most recent European championship. Ideal in race conditions with upwind abilities and as well for recreational sailing. Dedicated bottom for maximum speed in low wind conditions. Dagger board made of upscale sandwich construction. Formula : Bottom cut out to release the board in low speed. Formula : 4 Race footstraps RS380 and RS D2 : 8 Race footstraps and Dagger board, 1 CNC G10 fin, adjustable mast track. Molded semi-custom Custom finish CARBON Version: Carbon Biaxial 160gr construction on 80 kg/m3 PVC deck and bottom, multiple structural reinforcement on the rail Part # Model Size Vol Weight (kg) Fin Sail Size Retail RS Formula 235 x Deep Tuttle (no fin) $ RS 380 Elite 380 x cm Tuttle + 85cm Race Daggerboard $ RS D2 Elite 380 x cm Tuttle + 85cm Race Daggerboard $

35 Kona One Kona One is the one design class of the future. The unique design combines the qualities of the classical race boards with the features of modern short boards. This is the board to learn, to race and to master. Thanks to its long rocker line and step tail construction this is the board for all conditions. It has superior sub-planing ability upwind. And thanks to the step tail it behaves like a short board when planing making it possible to sail even upwind on the fin. Also features great wave performance and smooth jibing qualities. If you re going to own only one board, this is it. Kona Worlds Boards Special All Kona Worlds Charter Boards are 20% off wholesale. Take boards prior to Dec 1st, get an additional 10% discount OR Take boards prior to Jan 15th, get an addition 5% discount All boards after Jan 15 will be offered at the 20% discount off wholesale and are subject to prior sale. Available hull only or complete with rig Part # Model Size Vol Weight (kg) Fin Sail Size Retail O-766 Kona One 350 x cm Powerbox + 65cm Daggerboard $ Kona One Club 350 x Plastic Powerbox + 65cm Daggerboard $ Kona One Bag $120 35

36 Kona One Packages Kona One Packages All packages come complete with Kona One board, Kona sail, mast, boom, uphaul, outhaul, base and extension. The One Design sail is Kona s most exclusive sail and the one to be used together with the Kona One. They are the two components that compose the One design class where the sail size is dependent on the sailor s weight. The design of the sail has carefully been improved each season to perfection making this the sail to accompany the Kona One or any of our windsurfing boards. Thanks to its great flexibility it will serve the sailor in all conditions. It can be rigged from full power in light conditions to reduced power making it enjoyable and controllable in winds exceeding 30 knots. It is extremely well balanced using a carbon mast. The sections of the sail taking the most pressure also have been reinforced for endurance and longtime use. The One Design sail is also available in a complete x-ply version (special order), aimed for windsurfing school. The smaller sail sizes 3.5, 4.2 and 5.0 should be selected according to skill level. Your weight < 55 kg select sail size 5.8 m2 Your weight < 65 kg select sail size 7.4 m2 or 6.6 m2 Your weight < 75 kg select sail size 7.8 m2 Your weight < 85 kg select sail size 8.2 m2 Your weight < 98 kg select sail size 9.0 m2 Your weight > 98 kg select sail size 9.8 m2 Part # Item Retail O-770 Kona One Kona Rig $2693 O-771 Kona One Kona Rig $2735 O-772 Kona One Kona Rig $ Kona One Kona Rig $2815 O-773 Kona One Kona Rig $2848 O-774 Kona One Kona Rig $ Kona One Kona Rig $

37 Step One Step One is built on the successful Kona One-design. It has the same measurements as the One design board. Thanks to simplified graphics, deck and dagger board it comes at a more affordable price. It is the perfect choice as the entry point to the class and for windsurfing schools where it also can be used for teaching the first steps of racing before moving over to Kona One. Part # Model Size Vol Weight (kg) Fin Sail Size Retail Kona One Step One 350 x cm plastic $

38 Hula Kona Hula setting a new standard within the school boards category When the Kona Windsurfing design team started the Hula-project the concept was clear. The aim was to create a board that better than any other school board would help more sailors to windsurf faster and make it easy and enjoyable from the very first moment. The result was Kona Hula. With more than 30 years of windsurfing, coaching, teaching and design experience Tinho Dornellas designed and headed the project into success. More than anything, this board will help the beginner plane as soon as possible, especially the heavier sailor. What further distinguishes Kona Hula is the ease of glide and the sub-planing qualities. This gives the sailor an enjoyable experience even in very light winds. Many unique design features are built into the Hula, stemming from decades of solid teaching experience and are desirable to windsurfing instructors. The board has great stability and yet is fun to ride. The centerboard has been carefully designed to minimize length but still provide good lift. The same goes with the fin that has a wider base that enables good grip without putting on more length than needed. Kona Hula aims to set a new standard within windsurfing school boards aimed for beginner and intermediate sailors looking for fast development also in flat water or swells and choppy conditions. Includes 2 fins and a nose cone. Part # Model Size Vol Weight (kg) Fin Sail Size Retail Hula 294 x cm fiberglass $

39 CarbOne Kona Carb One Although designed to be the best overall board the CarbOne has a wide range of use. The characteristic subtle shape combines stability, maneuverability and control. Cruising and racing in all conditions becomes a thrill and performing classic tricks becomes a breeze. Last but not least the Kona stands out like the ultimate board, with its stability and responsive rig steering.it makes an excellent SUP board, mainly due to its volume and pure surfboard outline. With its fast rocker line and superior windsurfer characteristics, it is also the best cross over coolest board on the market for those who wish to add uncompromising windsurfing to their envelope and have no limits in the pocket. Part # Model Size Vol Weight (kg) Fin Sail Size Retail CarbOne 350 x Powerbox (No Fin) 65cm carbondagger board $

40 Kona Molokai w/dagger Board Kona Molokai AST has exactly the same measurement as the Bamboo version, only with less exclusive materials used. This is the perfect choice for schools, rental stores or anyone looking for quality at an affordable price. Molokai AST is perfect for recreational paddling & yoga classes, but also wave riding. It is equipped with a mast track enabling it to be used either for wind supping or easy windsurfing. It is a stable design, yet with a very good glide in flat water and wave riding capabilities as the fin is adjustable according to type of use. Thanks to the leash plugs in the front and the back it is easy to attach some cargo or leash when wave riding. The very durable construction will make this board last for a very long time, giving the user many moments of great joy. Comes with dagger board. Part # Model Width Nose Tail Volume Weight(kg) Fin Retail Molokai WS Center Fin + Dagger Board $

41 Kona Molokai WS & Windsup Rig Kona Molokai 10.7 WS Kona Molokai AST has exactly the same measurement as the Bamboo version, only with less exclusive materials used. This is the perfect choice for schools, rental stores or anyone looking for quality at an affordable price. Molokai AST is perfect for recreational paddling & yoga classes, but also wave riding. It is equipped with a mast track enabling it to be used either for wind supping or easy windsurfing. It is a stable design, yet with a very good glide in flat water and wave riding capabilities as the fin is adjustable according to type of use. Thanks to the leash plugs in the front and the back it is easy to attach cargo or a leash when wave riding. The very durable construction will make this board last for a very long time, giving the user many moments of great joy. Kona Windsup The new Kona Wind Sup sail is all about simplicity. This sail features FBT flip batten technology. This concept allows the benefit of full length battens with the simplicity of a soft sail. The 3 full length battens are secured to the sail body with velcro. They can quickly be flipped vertically which allows the sail to stay on the mast while rolled up with the boom still attached.. The sail and mast can be covered with the included mast bag for easy storage on top of your board. This allows rigging time to reduced to just 1 minute. Now you have a sail that has full batten performance with soft sail convenience. Built of all dacron with a vinyl window the sail will last even in a harsh environment. View rigging video here: Part # Item Retail Molokai WS 10 7 & 4.8 WindSUP Rig $ Molokai WS 10 7 & 5.8 WindSUP Rig $

42 Progressive TST 10 6 & WindSUP Length 10 6 Width 33 Thickness 4.8 Volume 227 The WindSUP is all about bringing windsurfing back to a simpler time with a few modern touches. The sail can go from the roof of your car to the water in under a minute. Just pull the included mast bag off, fold the boom down and roll the sail out. Attach the outhaul and you re ready to go! With its vertical battens, this sail offers the convenience of keeping the sail on the mast but still maintains a modern outline with a fat head and increased area below the boom. Pop this on an SUP or any longboard and remember how fun windsurfing can be in 5 to 10 knots of wind. Rigging instructions can be viewed at: Our Thermo Sandwich Tech 10 6 is built with an EPS core, fiberglass wrap with a thermoformed thin plastic shell. This combination provides a bomb proof construction which makes this board ideal for rentals, concessions, boats and any other tuff environments. The TST comes in a standard SUP version with paddle, fins and leash. It is also available in a windsurf version with a center fin box and mast track. Part # Model Retail TST 10 6 Wind with rear and center fin $ TST 10 6 SUP w/ 2.5 WindsUP Rig $ TST 10 6 SUP w/ 3.2 WindsUP Rig $ TST 10 6 SUP w/ 4.0 WindsUP Rig $ TST 10 6 SUP w/ 4.8 WindsUP Rig $ TST 10 6 SUP w/ 5.8 WindsUP Rig $

43 NEXT Soft SUP/Wind Length 10 8 Width 31 Thickness 5 Volume 220 The NEXT Windsurf version has a mast box on the deck and a removable center fin. The 31 width and high volume make it ideal to learn to windsurf and SUP on. Part # Model Retail Soft SUP / Windsurfer $599 43

44 44

45 Epic Gear Race Masts These are some of the highest quality masts in the world. They are made in Europe out of the best quality pre-preg carbon. Due to their unique construction process, they offer a very high reflex response. The lower section on the race and free race masts have a texillium finish which protects against abuse and sun exposure. These masts are what Aerotech sails are designed around and are all constant curve in their bends. They compliment all Aerotech model sails as well as many other brands that design around a constant curve. Part # Item Size Flex Diameter Carbon Weight (lbs) Retail O-372 Race Mast SDM 100% 4.30 $783 O-373 Race Mast SDM 100% 4.20 $755 O-374 Race Mast SDM 100% 3.75 $703 O-375 Race Mast SDM 100% 3.25 $ Race Mast SDM 100% 3.00 $649 O-376 Free Race Mast SDM 75% 5.65 $554 O-377 Free Race Mast SDM 75% 5.30 $516 O-378 Free Race Mast SDM 75% 5.25 $456 O-379 Free Race Mast SDM 75% 4.20 $418 O-380 Free Race Mast SDM 75% 3.85 $400 O-381 Free Ride Mast SDM 35% 5.85 $351 O-382 Free Ride Mast SDM 35% 5.85 $315 O-383 Free Ride Mast SDM 35% 4.85 $292 45

46 Epic Gear Wave Masts These are some of the highest quality masts in the world. They are made in Europe out of the best quality pre-preg carbon. Due to their unique construction process, they offer a very high reflex response. These masts are what Aerotech sails are designed around and are all constant curve in their bends. They compliment all Aerotech model sails as well as many other brands that design around a constant curve. The RDM wave masts have proven to be super durable with one of the lowest warranty rates in the industry. 1 Year Warranty on all models Part # Item Size Flex Diameter Carbon Weight (lbs) Retail O-384 Wave Mast Gold RDM 100% 4.40 $549 O-385 Wave Mast Gold RDM 100% 3.85 $517 O-386 Wave Mast Gold RDM 100% 3.15 $486 O-387 Wave Mast Gold RDM 100% 2.75 $454 O-388 Wave Mast Silver RDM 60% 4.60 $432 O-389 Wave Mast Silver RDM 60% 4.38 $386 O-390 Wave Mast Silver RDM 60% 3.94 $347 O-391 Wave Mast Silver RDM 60% 3.48 $ Wave Mast Silver RDM 60% 3.15 $320 46

47 Epic Gear Masts These masts are all about value and durability. The epoxy composite construction will stand up to the abuse of school use and offers the first timer a super durable affordable mast. We offer a complete line of masts in both RDM and STD. 1 Year Warranty on all models Part # Item Size Diameter Carbon Weight (lbs) Retail O-397 Epoxy Mast 460 SDM 0% 5.90 $146 O-398 Epoxy Mast 430 SDM 0% 5.75 $136 O-399 Epoxy Mast 400 SDM 0% 4.95 $ Epoxy Mast 370 SDM 0% 4.70 $ Epoxy Mast 340 SDM 0% 4.30 $115 O-392 Epoxy Mast 310 SDM 0% 3.25 $ Epoxy Mast 430 RDM 0% 4.90 $ Epoxy Mast 400 RDM 0% 4.80 $116 O-393 Epoxy Mast 370 RDM 0% 4.25 $116 O-394 Epoxy Mast 340 RDM 0% 4.00 $116 O-395 Epoxy Mast 310 RDM 0% 3.40 $ Epoxy Mast 300 RDM 0% 3.35 $ Epoxy Mast 280 RDM 0% 2.80 $116 O-396 Epoxy Mast 270 RDM 0% 2.55 $116 47

48 48

49 Aeron Booms MCT 29 Super stiff monocoque construction. The stiffest round aluminum boom you can get. Built-in removable front shim offers a perfect fit for RDM or STD masts. MCT 26C Narrow 26 mm grip offers the ultimate in comfort. The carbon tail improves stiffness and reduces swing weight. Built-in removable front shim offers a perfect fit for RDM or STD masts. MCT 26X Full monocoque construction in a 26 mm narrow grip is ideal for smaller hands. Built in removable front shim offers a perfect fit for RDM or STD masts. V Grip The V grip offers a double wall oval grip that allows for the stiffest aluminum boom we have ever seen. Built-in removable front shim offers a perfect fit for RDM or STD masts. The OS Race range serves as an alternative to carbon. With the oversized rear section of the boom arm combined with the forged tail, the stiffness was pleasing many of the formula racers and even more impressive was the price at a fraction of a carbon boom. 49

50 Aeron Booms 50 Part # Item Retail Aeron MCT 29 Boom $ Aeron MCT 29 Boom $ Aeron MCT 29 Boom $ Aeron MCT 29 Boom $ Aeron MCT 29 Boom $ Aeron MCT 26C Boom $ Aeron MCT 26C Boom $ Aeron MCT 26C Boom $ Aeron MCT 26X Boom $ Aeron MCT 26X Boom $ Aeron MCT 26X Boom $ Aeron Carbon Boom Slim $ Aeron Carbon Boom Slim $ Aeron Carbon Boom $ Aeron Carbon Boom $ Aeron Carbon Boom $ Aeron V Grip 26mm Boom $ Aeron V Grip 26mm Boom $ Aeron V Grip 26mm Boom $ Aeron V Grip 26mm Boom $ Aeron V Grip 26mm Hybrid $ Aeron V Grip 26mm Hybrid $ Aeron V Grip Carbon 26mm Boom $ Aeron V Grip Carbon 26mm Boom $ Aeron V Grip Carbon 26mm Boom $ Aeron OS Race Boom $ Aeron OS Race Boom $ Aeron OS Race Boom $260 *1 year warranty on all models

51 Epic Gear Booms Epic gear future boom. Perfect for trainer boom for kids. This boom has a narrow diameter grip and is adjustable. Epic gear slim boom An economical boom with a slim grip and a twin external pin adjustment system. Continuous aluminum front and rear ends. Articulating front end. Part # Item Retail O-422 Epic Gear Future Boom $97.50 O-423 Epic Gear Future Boom $97.50 O-425 Epic Gear Slim Boom $ O-426 Epic Gear Slim Boom $ *1 year warranty on all models 51

52 Kona Booms The monocoque (one piece) profile provides extraordinary stiffness and strength. The double pin lock system generates optimal load distribution and a stiff connection between the boom body and tail end, even when extended to the maximum. The robust front end incorporates an anti-friction lever and an integrated mast shim. When testing, our team was astonished by the performance of this boom. 52 Part # Item Retail Kona Boom $ Kona Boom $ Kona Boom $ Kona Boom $ Kona Boom $ Kona Boom $230 *1 year warranty on all models

53 53

54 Sail Battens & Parts Part #: O-151 Retail: $10.60 Adjustable head turban. Replacement head cap for sails with grommet at head. Adjust length by shortening or lengthening the line. Part #: Retail: $6.00 This female plastic head cap fits over most masts and works with buckle and webbing style adj heads. It is designed to work with webbing up to 1 Part #: O-152 Retail: $ x 27 Sheet of 2 mil monofilm with an adhesive backing. Cut film to size and shape you need. Apply to both sides of clean dry sails. Packaged in a clear tube that won t get crushed in your gear bag. Part #: O-154 Retail: $ Tubular hollow epoxy tube stock. Sold per foot Part #: O-155 Retail: $ Solid rod batten with tapered front section. Sold per foot. Part #: O-158 Retail: $9.65 Mechanical batten tensioner for 2001 and earlier 54

55 Sail Battens & Parts Part #: O-159 Retail: $9.65 Mechanical batten tensioner for 2002 and later Part #: Retail: $9.65 Mechanical batten tensioner for some 2013 and newer. Part #: O-160 Retail: $.70 Batten tensioner screw. Fits Part #: Retail: $5.00 Plastic ferrule designed to connect a.505 tube batten to a.333 rod. Part #: O-161, O-162, O-163 Retail: $3.60 Female mast cap available in 3 sizes. Insert top of mast in order for it to accept male style mast tops. O mm O mm O mm Part #: O-164 Retail: $4.10 Male mast top. 55

56 Sail Battens & Parts Part #: O-165, O-166, O-167 Retail: $12.90 Micro cam comes in three sizes. Fits older Rapid Fire sails. O-165 small O-166 medium O-167 large Part #: O-168, O-169, O-170 Retail: $14.80 Bearing style camber available in three sizes. Fits VMG Sails & Rapid Fire Sails up to O-168 small O-169 medium O-170 large Part #: Retail: $ Roller camber inducer Part #: O-171 Retail: $1.40 Camber roller and pin Part #: O-173, O-174, O-175, O-176 Retail: $22, $24, $25, $28 Sail bag O O O O Part #: O-177 Retail: $1.90 Plastic sail ring for 1.5 tube. Fits sunfish, sailfish, vikings, or other lateen rigged boats. 56

57 Mast bases, extensions & rigging items Part #: O-314 Retail: $56.20 Epic Gear mast foot. Chinook compatible foot has bolt attachment to board. Remove the cup to reveal a Euro pin. Mast foot works with either Chinook style or Euro pin style extensions. Part #: O-315 Retail: $50.65 Epic Gear tendon mast base Euro only Part #: Retail: $58.00 Aeron mast base. Super strong tendon base. Part #: Retail: $58.00 Aeron mast base Euro pin Part #: O-312 Retail: $58.10 Cobra track pin with US cup upper 57

58 Mast bases, extensions & rigging items Part #: O Retail: $58.10 Cobra track pin with euro pin Part #: Retail: $52.00 Nautix mechanical base Part #: Retail: $50.00 Nautix mechanical base euro pin Part #: O-311 Retail: $10.50 Cobra track pin. Fits most cobra built tracks as well as older fanatics and mistrals. Part #: O-303 Retail: $11.50 Epic Gear adapter kit. Includes base cup, washers and hardware. Converts or updates a base so it will accept modern mast extensions. Part #: O-301 Retail: $14.50 Tendon joint 58

59 Mast bases, extensions & rigging items Part #: O-302 Retail: $15.35 Universal joint, 8mm threaded inserts on both ends Part #: O-313 Retail: $3.20 Universal slider plate, 8mm threading Part #: O-326 Retail: $.90 Nyloc nut 8mm Part #: Retail: $14.00 Epic Gear Toe Jam Pad Part #: O-316 Retail: $26.15 Epic Gear Euro pin to RDM adapter 59

60 Mast bases, extensions & rigging items Part #: O-307 Retail: $54.50 Epic Gear 45cm quick release standard diameter extension, spring pin Part #: O-310 Retail: $38.40 Epic Gear 35cm economy standard diameter extension Part #: Retail: $63.00 Aeron std 30cm extension, spring pin Part #: Retail: $69.00 Aeron std 46cm extension, spring pin Part #: Retail: $69.00 Aeron std 30cm extension, euro pin Part #: Retail: $74.00 Aeron std 46cm extension, euro pin Part #: Retail: $81.00 Aeron skinny 30cm aluminum extension, spring pin 60

61 Mast bases, extensions & rigging items Part #: Retail: $84.00 Aeron skinny 46cm aluminum extension, spring pin Part #: Retail: $84.00 Aeron skinny 30cm extension, euro pin Part #: Retail: $91.00 Aeron skinny 46cm extension, euro pin Part #: O-323, O-324 Retail: $16.60, $19.00 Base pad O O Part #: O-317 Retail: $11.80 Triple pulley hook, aluminum with brass rollers Part #: O-318 Retail: $13.50 Four pulley hook, aluminum with brass rollers 61

62 Mast bases, extensions & rigging items Part #: O-321 Retail: $55.60 Downhaul crank fits Euro pin or Chinook style bases. Heavy duty construction. Part #: O-322, O-322F Pre-stretched line 4mm x 100m roll Retail: $120 roll, $.40 ft Part #: 39010, 39010F Dyneema 4mm x 100m roll Retail: $300 roll, $1.00 ft 62

63 Boom parts & accessories Part #: O-401 Retail: $7.50 Epic Gear boom front end backing plate Part #: O-402 Retail: $7.00 Epic Gear boom ext collar clip (each) - Old Style Part #: Retail: $7.00 Epic Gear boom ext collar clip (each) - New Style Part #: O-403 Retail: $21.50 Boom grip, black only. Enough to do one boom. each strip measures 4.25 x 50 63

64 Boom parts & accessories Part #: O-404 Retail: $11.00 Epic gear standard uphaul. Part #: O-406 Retail: $12.00 Epic Gear braided uphaul Part #: O-408 Retail: $20.00 Epic gear deluxe uphaul. Soft nylon woven over foam balls. The best choice for beginners. Assorted colors. Part #: O-409 Retail: $14.00 Epic Gear padded boom pad fits around the front end of your boom and protects your board from dings. Attaches with velcro. Assorted colors. 64

65 Boom parts & accessories Part #: Retail: $55.00 Aeron front boom end. Part #: O-417 Retail: $10.00 RDM/ boom shim Part #: O-414 Retail: $33.00 Adj style cleat outhaul (pair) 65

66 Convert Harnesses Black Colorway Epic Gear Convert Harness The convert harness is a great all around harness that will convert from a seat to a waist harness. The removable seat attachment velcros internally into the waist harness. Removable rear handle allows one to use this harness for windsurfing or kiteboarding. User friendly quick release bar. Camo Colorway Part # Item Retail Epic Gear Convert XS $ Epic Gear Convert Small $ Epic Gear Convert Medium $ Epic Gear Convert Large $ Epic Gear Convert XL $149 66

67 Viper Harnesses Black Colorway Epic Gear Viper Harness The Viper Waist harness is a comfortable and supportive waist harness built to last. The thermo form design, primary power belt and bar pad will pull this harnnes together for a tight and flexible fit. Removable rear handle allows one to use this harness for windsurfing or kiteboarding. User friendly quick release bar. SnakeColorway Part # Item Retail Epic Gear Viper XS $ Epic Gear Viper Small $ Epic Gear Viper Medium $ Epic Gear Viper Large $ Epic Gear Viper XL $139 67

68 Zephyr Harnesses Silver Colorway Epic Gear Zephyr Harness Zephyr is a seat harness built for comfort and durability. Low hook with thermo form upper. Perfect combination of padding and flexibility. Removable rear handle allows one to use this harness for windsurfing or kiteboarding. User friendly quick release bar. Black Colorway Part # Item Retail Epic Gear Zephyr XS $ Epic Gear Zephyr Small $ Epic Gear Zephyr Medium $ Epic Gear Zephyr Large $ Epic Gear Zephyr XL $129 68

69 Harness lines and accessories Part #: O-623 Retail: $20.35 Spreader bar 10 for 2 webbing. Part #: O-624 Retail: $20.35 Spreader bar 11.5 for 2 webbing. Part #: O-625 Retail: $20.35 Spreader bar 10 for 1.5 webbing. Part #: O-626 Retail: $20.35 Spreader bar 11.5 for 1.5 webbing. Part #: O-628 Retail: $32.00 Buckle adjustable harness lines Adjustable while sailing will not slip. Grab the large webbing loop to shorten the lines, lift heavy duty tab to lengthen. 69

70 Harness lines and accessories Part #: O-629 Retail: $32.00 Buckle adjustable harness lines Adjustable while sailing will not slip. Grab the large webbing loop to shorten the lines, lift heavy duty tab to lengthen. Part #: Retail: $24.00 Epic Gear fixed harness lines available in 7 different sizes => 20 (51cm) => 22 (56cm) => 24 (61cm) => 26 (66cm) => 28 (71cm) => 30 (76cm) => 32 (81cm) Part #: Retail: $69.00 Race harness line with clam cleat for on the fly adjustment. 70

71 Harness lines and accessories Part #: Retail: $69.00 Kona harness lines. Ultimate longboard harness lines. Aluminum cleat makes adjusting super easy. Part #: O-637 Retail: $8.80 Polyurethane tubing is designed to protect harness line rope from hook abrasion. Sold in pairs, each piece is 2 long. Assorted colors. 71

72 Select Fins X1 Free Carve Edge Power Edge S1 Slalom S1 Slalom XL S1 Race Part # Item Retail Select S1 slalom 37cm tuttle $ Select S1 slalom 39cm tuttle $ Select S1 slalom XL 41cm deep tuttle $ Select S1 slalom XL 43cm deep tuttle $ Select S1 slalom XL 45cm deep tuttle $ Select S1 slalom XL 47cm deep tuttle $ Select S1 slalom XL 49cm deep tuttle $ Select S1 Race 51cm deep tuttle $ Select S1 Race 53cm deep tuttle $ Select S1 Race 55cm deep tuttle $ Select S1 Race 57cm deep tuttle $ Select S1 Race 65cm deep tuutle $ Select S1 Race 70cm deep tuttle $ Select X1V4 19cm production $ Select X1 V4 20cm production $ Select X1 V4 21cm production $ Select X1 V4 23cm production $ Select X1 V4 25cm production $ Select Free Carve 31cm production $ Select Free Carve 33cm production $ Select Edge 33cm powerbox $ Select Edge 37cm powerbox $ Select Edge 41cm powerbox $ Select Power Edge 45cm powerbox $ Select Power Edge 49cm powerbox $189 72

73 Hydrotech/Kona Fins Light wind wave Kona fin Kona weed fin, class legal Fin Base Guide Plastic Powerbox trim powerbox tuttle production Part # Item Retail O-560 Kona One fin 40cm powerbox $129 O-561 Kona One fin 46cm powerbox $149 O-562 Kona fin 30cm for 11 5 production $ Kona One fin 38cm $ Kona One weed fin 40cm powerbox $ Hydrotech Light wind wave 30cm production $ Plastic 35cm powerbox fin $68 73

74 Hydrotech Fins G-10 freeride fin with slightly swept back shape. Molded on base; production, powerbox, trim or tuttle. G-10 freeslalom fins offer the perfect compliment to today s Freeride boards. Their vertical design with just enough rake to improve turning while still offering excellent upwind ability. Powerbox or tuttle base. Part # Item Retail O-505 Freeride fin 29cm 11.5 production $112 O-506 Freeride fin 29cm 11.5 powebox $122 O-507 Freeride fin 29cm 11.5 trim $122 O-508 Freeride fin 29cm 11.5 tuttle $122 O-509 Freeride fin 32cm 12.5 production $112 O-510 Freeride fin 32cm 12.5 powerbox $122 O-511 Freeride fin 32cm 12.5 trim $122 O-512 Freeride fin 32cm 12.5 tuttle $122 O-513 Freeride fin 35cm 13.5 production $112 O-514 Freeride fin 35cm 13.5 powerbox $122 O-515 Freeride fin 35cm 13.5 trim $122 O-516 Freeride fin 35cm 13.5 tuttle $122 O-517 Freeride fin 39cm 15 production $112 O-518 Freeride fin 39cm 15 powerbox $122 O-519 Freeride fin 39cm 15 trim $122 O-520 Freeride fin 39cm 15 tuttle $122 O-565 Freeslalom fin 42cm powerbox $127 O-566 Freeslalom fin 42cm tuttle $127 O-567 Freeslalom fin 46cm powerbox $129 O-568 Freeslalom fin 46cm tuttle $129 O-569 Freeslalom fin 50cm powerbox $133 O-570 Freeslalom fin 50cm tuttle $133 74

75 Hydrotech Fins G-10 weed fin with swept back shape. Molded on base; production, powerbox, trim or tuttle. Polyester Carve wave fin. Molded on base; production only Part # Item Retail O-503 Carve fin 32cm 12.5 prodcution $81 O-504 Carve fin 35cm 13.5 production $83 O-537 Weed fin 32cm 12.5 production $128 O-538 Weed fin 32cm 12.5 powerbox $138 O-539 Weed fin 32cm 12.5 trim $138 O-540 Weed fin 32cm 12.5 tuttle $138 O-541 Weed fin 36cm 14 production $128 O-542 Weed fin 36cm 14 powerbox $138 O-543 Weed fin 36cm 14 trim $138 O-544 Weed fin 36cm 14 tuttle $138 O-545 Weed fin 40cm production $138 O-546 Weed fin 40cm powerbox $149 O-547 Weed fin 40cm trim $149 O-548 Weed fin 40cm tuttle $149 O-549 Weed fin 44cm 17.4 powerbox $149 O-550 Weed fin 44cm 17.4 trim $149 O-551 Weed fin 44cm 17.4 tuttle $149 O-552 Weed fin 48cm 18.9 powerbox $149 O-553 Weed fin 48cm 18.9 trim $149 O-554 Weed fin 48cm 18.9 tuttle $149 O-555 Weed fin 52cm 20.4 tuttle $168 O-556 Weed fin 60cm 23.6 tuttle $168 75

76 Fin Accessories Standard Fin Bag Compartmentalized bag (slots) with side pockets. 50cm x 13 x 16 Deluxe Fin Bag Compartmentalized bag with side pockets. 80cm x 26 x 16 Part # Item Retail O-501 Fin bag standard $40 O-502 Fin bag deluxe $ Fin tab and screw $1.50 O-582 Fin screw 1/4 x 20 1 $.90 O-583 Fin screw 1/4 x $1.00 O-584 Fin screw 1/4 x 20 2 $1.10 O-585 Fin screw 1/4 x $1.20 O-586 Fin screw 1/4 x 20 3 $1.90 O-587 Fin screw 1/4 x $2.00 O-588 Fin screw 1/4 x 20 4 $2.40 O-589 Fin screw 6mm x 20mm $1.20 O-590 Fin screw 6mm x 25mm $1.30 O-591 Fin screw 6mm x 30mm $1.40 O-592 Fin screw 6mm x 40mm $1.50 O-593 Fin screw 6mm x 45mm $1.60 O-594 Fin screw 6mm x 50mm $1.80 O-595 Fin screw 6mm x 60mm $2.00 O-596 Fin screw 6mm x 70mm $2.20 O-597 Fin screw 6mm x 80mm $2.40 O-598 Fin screw 6mm x 100mm $

77 Footstraps & Board Accessories Part #: O-665 Retail: $13.75 Epic Gear neoprene foostrap (each). Durable strap built with neoprene over heavy duty webbing. Velcro adjustable for fast changes. Part #: O-667 Retail: $11.25 Epic Gear neoprene foostrap cover only (each). Part #: O-671 Retail: $13.75 Epic Gear buckle adjustable footstrap (each) Part #: O-669 Retail: $21.00 Kona One adjustable footstrap (each). Part #: Retail: $15.00 Kona One std footstrap (each). Part #: Retail: $21.00 Exocet race pro footstrap (each). Part #: O-650 Retail: $.80 Footstrap screw (each). 7/8 long. 77

78 Footstraps & Board Accessories Part #: O-651 Retail: $1.60 Footstrap washer (each). Part #: O-652 Retail: $7.40 Vent Screw with o-ring. Part #: O-663 Retail: $79.00 Kona One dagger plates (pair). Part #: O-664 Retail: $.60 Kona One dagger plate screw & washer (each). Part #: O-678 Retail: $69.00 Kona dagger gasket. 78

79 Footstraps & Board Accessories Part #: Elite gasket. Retail: TBA Part #: Retail: $67.00 Allgaier dagger board. Part #: Retail: $ Kona dagger board. Part #: Retail: $85.00 Link wheel. Part #: Retail: $ Nose cone Nano Specify board size when ordering. Part #: Retail: $ Nose cone Cross Specify board size when ordering. 79

80 Footstraps & Board Accessories Part #: Retail: $ Nose cone S-Cross Specify board size when ordering. Part #: Retail: $ Kona One deck pad. 80

81 Part #: Retail: $29.00 Epic Gear low top water shoe. Durable light weight water shoe offers a neoprene top with ankle strap and durable sole => => => => => => 45 Part #: O O-895 Retail: $55.00 This Okespor Kite-Low top boot features 4mm neoprene around the entire shoe, and a patented tri-directional velcro fastener. When these boots are on they stay on. O-889 => 38 T1 O-890 => 40 T2 O-891 => 41 T3 O-892 => 42 T4 O-893 => 43 T5 O-894 => 44 T6 O-895 => 45/46 T7 6+ Less 10% 12+ Less 15% 24+ Less 20% 100+ Less 25% In season any time program. Part #: Retail: $15.00 Cell phone bag 6 x 4 Accessories Size Conversion Euro US / Size Conversion Euro US / Part #: 57006, 57007, Retail: $18, $20, $23 Epic Gear dry bag. This bag comes in three sizes to hold all types of gear. The bag rolls from the top down and buckles closed to create an air tight and water tight closure => 15L => 20L => 30L 81

82 Accessories Part #: O-613, O-614, O-615, O-616 Retail: $79.00 Watersports vest Lightly padded neoprene vest. Protects and provides aid to floatation, but is not Coast Guard approved. Zipper side entry. Great for learning to waterstart or for kiteboarding. O-613 => Small O-614 => Medium O-615 => Large O-616 => XL Part #: O-818 Retail: $ Carry all bags These bags are designed to carry masts and sails. Store your masts in the compartmentalized section on the bottom of the bag. Your sails go above the mast section. Slots are placed in the bags so you can run tie-downs through the center of the bag, cinching the masts, but not crushing your sails. 260 x 33 x 28 Part #: O-825 Retail: $ Pro Formula Carry all bags These bags are designed to carry masts and sails. Store your masts in the compartmentalized section on the bottom of the bag. Your sails go above the mast section. Slots are placed in the bags so you can run tie-downs through the center of the bag, cinching the masts, but not crushing your sails. 305 x 56 Part #: O-815 Retail: $ Adjustable quiver bag. This bag adjusts from 230cm to 260cm to hold any quiver of sails. Cinch straps help hold everything in place and eliminate roof rack flapping. Plastic zipper will not corrode. Part #: O-805 Retail: $48.00 Solar reflective padded bags for 2-pc masts Compartmentalized so the pieces are not rubbing against each other. 82

83 Accessories Part #: O-806 Retail: $52.00 Solar reflective padded bags for 2-pc masts Compartmentalized so the pieces are not rubbing against each other. Part #: Retail: $20.00 Short sleeve Aerotech lycra rash guard. Made from high quality materials that wick moisture and dry quickly. Loose fit and quick dry. This is a great water sports shirt. Available in small, medium, large and x-large. Part #: Retail: $25.00 Long sleeve Aerotech lycra rash guard. Made from high quality materials that wick moisture and dry quickly. Loose fit and quick dry. This is a great water sports shirt. Available in small, medium, large and x-large. 83

84 Car Rack Accessories Epic Gear Round Rack Pads Padded round rack pads come in two sizes, 20 and 31 long. Epic Gear Oval Rack Pads Padded oval rack pads come in two sizes, 20 and 31 long. Fits aero bars and most factory racks. Epic Gear Rack Straps Buckle rack straps great for kayaks, surfboards, sup and windsurf boards and more. Available in a 12 x 1 and a 14 x 1.5 Part # Model Retail O x 1 rack straps sold as a pair $ x 1.5 rack straps sold in a pair. Rubber coated buckles $ Epic Gear 31 rack pads round long sold as a pair $ Epic Gear 20 rack pads round short sold as a pair $ Epic Gear 31 rack pads oval long sold as a pair $ Epic Gear 20 rack pads oval short sold as a pair $

85 85

86 Board Bag Program In Season / Anytime Program Buy 6 bags, any mix, less 4% Buy 12 bags, any mix, less 6% Buy 24 bags, any mix, less 8% Buy 100 bags, any mix, less 10% Special program may be used to reach your quantity $ discount, but no further discounts apply. 86

87 Epic Gear day wall bags Perfect day bag. These will protect your board from daily wear & tear and dings. Lightly padded (6mm) bags have nylon on one side and solar reflective material on the other. There is a fin slot on both sides. Plastic zipper will not corrode. This is a coffin style bag with side walls. Part # Item Nose(cm) Middle(cm) Tail(cm) Retail O-901 Day wall 240 x x $108 O-902 Day wall 240 x x $114 O-903 Day wall 240 x x $121 O-904 Day wall 240 x x $145 O-905 Day wall 240 x x $155 O-906 Day wall 255 x x $114 O-907 Day wall 255 x x $118 O-908 Day wall 255 x x $126 O-909 Day wall 255 x x $149 O-910 Day wall 255 x x $157 O-911 Day wall 270 x x $121 O-912 Day wall 270 x x $134 O-913 Day wall 270 x x $155 O-914 Day wall 270 x x $161 O-915 Day wall 295 x x $168 O-916 Day wall 295 x x 33.5 round nose $184 O-917 Day wall 310 x x $171 O-918 Day wall 320 x x $172 O-919 Day wall 320 x x 31.5 round nose $ Day wall 320 x x $ Day wall 335 x x $193 O-920 Day wall 355 x x $175 O-921 Day wall 355 x x $ Day wall 355 x x $ Day wall 366 x x $256 O-922 Day wall 380 x x $ Day wall 385 x x 28.3 raceboard $208 O-923 Day wall 385 x x 31.5 touring $ Day wall 427 x x 28 raceboard $226 O-924 Day wall 425 x x 30.7 touring $226 87

88 Epic Gear adjustable day wall bags An adjustable length coffin style board bag with a rear entry zipper. With just these few sizes, you can find a fit for 99% of the boards on the market. Lightly padded (6mm) bags have nylon on one side and solar reflective material on the other. Features include; a plastic zipper that will not corrode, a removable wheel deck, and shoulder strap. Part # Item Nose(cm) Middle(cm) Tail(cm) Retail O-941 Adj 55 day wall $108 O-942 Adj 65 day wall $121 O-943 Adj 75 day wall $131 O-944 Adj 85 day wall $155 O-945 Adj 100 day wall $166 O-946 Adj 90 day wall $166 O-947 Adj 75 day wall $187 88

89 Epic Gear economy adj day wall bags An adjustable length coffin style board bag with a rear entry zipper. These two sizes will fit 99% of the boards on the market. Lightly padded (6mm) bags have solar reflective material on both sides. Features include; a plastic zipper that will not corrode. This is an envelope style bag (no side walls) so add 1-2 to the width of your board to ensure a good fit. Part # Item Nose(cm) Middle(cm) Tail(cm) Retail Adj Economy day wall x $ Adj Economy day wall x $149 89

90 Epic Gear adjustable deluxe wall bags Our best quality bag. An adjustable length coffin style board bag with heavy padding and a rear entry zipper. This bag is made of 1680-denier ballistic cordura on one side and Solar Plus reflective material on the other. Features include: a plastic zipper that will not corrode, a removable wheel deck, and shoulder strap. Part # Item Nose(cm) Middle(cm) Tail(cm) Retail O-995 Adj 55 deluxe wall $158 O-996 Adj 65 deluxe wall $174 90

91 Epic Gear Travel Pro Gear Bags This is our heaviest duty bag built to protect your board during long trips. This bag is capable of carrying 2 boards or 1 with lots of gear. 18cm thick 12mm foam Double foam protection nose and tail Heavy cordura construction with nose and tail patch Oversized wheels Plastic drag strips Plastic nose and tail sheild Vented Name tag holder Board Divider Part # Item Nose(cm) Middle(cm) Tail(cm) Retail Travel Bag 240 x 65 TBA 65 TBA $ Travel Bag 275 x 85 TBA 85 TBA $299 91