Safety Data Sheet (SDS) Revision / Review Date: 9/03/14

Transcription

1 Safety Data Sheet (SDS) Revision / Review Date: 9/03/14 1. Chemical Product and Company Identification Product Name: DBP Distributed By: HB Chemical 1665 Enterprise Parkway Twinsburg Oh Phone MSDS Prepared By (w Suppliers Input): HB Chemical Chemical Name: Di n-butyl phthalate Chemical Family: Esters CAS Number: Product Use: Manufacture Molecular Weight: g/mol For emergency health, safety, and environmental information, calls For emergency transportation information, in the United States: call CHEMTREC at Hazard(s) Identification Classification of the substance or mixture: GHS classification in accordance with 29 CFR 1910 (OSHA HCS) Reproductive toxicity (Category 1 B), H360 Acute aquatic toxicity (Category 1), H400 Label: Signal Word: Hazard statement: Precautionary statements: Danger May damage fertility or the unborn child. Very toxic to aquatic life Do not handle until all safety precautions have been read and understood. Avoid release to the environment Use personal protective equipment as required. If exposed or concerned get medical advice/attention. Collect spillage. Dispose of contents/containers to an approved waste disposal plant.

2 3. Composition / Information on Ingredients Dibutyl phathalate included in the Candidate List of Substance of Very High Concern (SVHC) according to Regulation (EC) No. 1907/2006 (REACH) Chemical Name CAS # Concentration Dibutyl Phthalate % 4. First Aid Measures General advise: Inhalation: Eyes: Consult a physician. Show this SDS to the doctor in attendance. Move out of dangerous area. If symptoms develop, move victim away from exposure and into fresh air. Administer oxygen if breathing is difficult. Flush eyes with copious quantities of water while holding eyelids open. If symptoms persist or if there is any visual difficulty, consult physician. Skin: Ingestion: Most important symptoms and effects both Acute and delayed: Remove contaminated clothing and launder it before reuse. Wash exposed area with soap and water. If irritation persists, consult a physician. Never give anything by mouth to an unconscious person. Rinse mouth with water. Consult a physician. The most important known symptoms and effects are described in section Fire-Fighting Measures Suitable Extinguishing Media: Special Fire Fighting Procedures: Special hazards arising from the substance or mixture: Unusual fire and explosion hazards: Water Spray, Dry Chemical, Carbon Dioxide CO2, alcoholresistant foam. Wear self-contained breathing apparatus for firefighting if necessary. Carbon oxides None 6. Accidental Release Measures Steps to be taken in case material is Spilled: Wear appropriate personal protective equipment. Avoid breathing vapors, mist or gas. Ensure adequate Ventilation. Evacuate personnel to safe areas. For personal protection see section 8.

3 Environmental Disposal Information: Waste Disposal: Prevent further leakage or spillage if safe to do so. Do not let product enter drains. Discharge into the environment must be avoided. Soak up with inert absorbent material and dispose of as hazardous waste. Keep in suitable, closed containers for disposal. For disposal see section Handling and Storage: Precautions to be taken in handling: Conditions for Storage: Avoid inhalation of vapor or mist. Keep container tightly closed in a dry and well ventilated place. Containers which are opened must be carefully resealed and kept upright to prevent leakage. 8. Exposure Controls / Personal Protection Exposure Controls: Respiratory Protection: Protective Gloves: Eye Protection: Skin and Body Protection: Decontamination Facilities: Handle in accordance with good industrial hygiene and safety practices. Wash hand before breaks and at the end of workday. Where risk assessment shows air-purifying respirators are appropriate use a full face respirator with multipurpose combination (US) or type ABEK (EN14387) respirator cartridges a back up to engineering controls. If the respirator is the sole means of protection, use a full face supplied air respirator. Use repirators and components tested and approved under appropriate government standards such as NIOSH (US) or CEN(EU). Handle with nitrile rubber chemical gloves. Dispose of contaminated gloves after use. Wash and dry hands. Wear safety glasses or chemical goggles to prevent eye contact as necessary. Wear a face shield if so lashing is a problem. Wear impervious clothing, including boots, gloves, lab coat, apron coveralls as appropriate to prevent skin contact. The type of protective equipment must be selected according to the concentration and amount of the dangerous substance at the specific workplace. Eye bath, washing facilities (sinks / showers) 9. Physical and Chemical Properties Physical Form: Liquid Appearance & Odor: Clear/Characteristic. Specific Gravity: 1.048

4 Boiling Point: 340 o C Solubility in Water 11.2 mg/l Flash Point (COC) 191 o C Vapor Density : 9.6 Vapor Pressure (20 o C): mbar Freezing Point: -35 o C Viscostiy (25 o C ): 15 mpa.s 10. Stability and Reactivity Stability: Incompatibility (Materials to Avoid): Conditions to Avoid: Hazardous decomposition products: Stable under recommended storage conditions. Strong oxidizing agents, Nitrates, Bases, acids, Chlorine. No data available. Other decomposition products, No data available. 11. Toxilogical Information Information on toxicological effects:

5 12. Ecological Information Toxicity:

6 13. Disposal Considerations Product: Offer surplus and non-recyclable solution to a licensed disposal company. Contact a licensed professional waste disposal service to dispose of this material. 14. Transport Information 15. Regulatory Information 16. Other Information The above information has been compiled from what we believe to be credible sources. To our knowledge the information is accurate and reliable, however, it is not guaranteed. Any recommendations issued by HB Chemical personnel or literature is derived from experience and by no means should be taken as fact or construed as a recommendation to violate of any law, regulation or patent. It is the users responsibility to determine the suitability of any HB supplied material in their application. The individual conditions of each customer are well outside of our control and we cannot be held liable for its functionality and use. Please contact our office should you need specific information beyond what is supplied above. As with all Chemical usage safety precautions beyond the stated are highly recommended.