KEMSEAL 2K300/SP2 PRIMER- (A) COMPONENT Safety Data Sheet

Transcription

1 In accordance with the Regulation on s Regarding Hazardous Substances and Mixtures published in the Official Journal numbered on December 13, 2014 SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product form : Mixture Product name : KEMSEAL 2K300/SP2 PRIMER- (A) Component 1.2. Relevant identified uses of the substance or mixture and uses advised against Use of the substance/mixture : Binary component, polyurethane based, suitable for general use primer material 1.3. Details of the supplier of the safety data sheet KEMFORTE SYSTEMS 2000 Rogers Road, Perth, ON K7H 1P9 T + (613) F + (613) Emergency Phone: FOR EMERGENCIES INVOLVING DANGEROUS GOODS Call CANUTEC's 24 hr Number SECTION 2: Hazards identification 2.1. Classification of the substance or mixture Flammable liquids, Category 3 H226 Skin corrosion/irritation, Category 2 H315 Full text of H-statements: see section Label elements Hazard pictograms (SEA) : Extra labelling to displayextra classification(s) to display Signal word (SEA) Hazard statements (SEA) Precautionary statements (SEA) GHS02 : Warning GHS07 : H226 - Flammable liquid and vapour. H315 - Causes skin irritation. : P233 - Keep container tightly closed. P241 - Use explosion-proof electrical/ventilating/lighting equipment. P264 - Wash hands, forearms and face with soap and water thoroughly after handling P280 - Wear protective gloves/protective clothing/eye protection/face protection. P302+P352 - IF ON SKIN: Wash with plenty of water/ P321 - Specific treatment necessary (see label) 2.3. Other hazards Adverse physicochemical, human health and environmental effects : Flammable liquid and vapour. Causes skin irritation. 1/7

2 SECTION 3: Composition/information on ingredients 3.1. Substances Not applicable 3.2. Mixtures Name Product identifier % Classification according to Classification, Labelling and Packaging of Substances and Mixtures (SEA) Regulation published in the Official Journal numbered on December 11, Xylene (CAS-No.) (EC-No.) (EC Index-No.) Full text of H-statements: see section Flam. Liq. 3, H226 Acute Tox. 4 (Inhalation), H332 Acute Tox. 4 (Dermal), H312 Skin Irrit. 2, H315 SECTION 4: First aid measures 4.1. Description of first aid measures First-aid measures after inhalation First-aid measures after skin contact First-aid measures after eye contact First-aid measures after ingestion : Remove person to fresh air and keep comfortable for breathing. : Rinse skin with water/shower. Take off immediately all contaminated clothing. If skin irritation occurs: Get medical advice/attention. : Rinse eyes with water as a precaution Most important symptoms and effects, both acute and delayed Symptoms/effects after skin contact : Call a poison center or a doctor if you feel unwell. : Irritation Indication of any immediate medical attention and special treatment needed Treat symptomatically. SECTION 5: Firefighting measures 5.1. Extinguishing media Suitable extinguishing media 5.2. Special hazards arising from the substance or mixture Fire hazard Hazardous decomposition products in case of fire 5.3. Advice for firefighters Protection during firefighting SECTION 6: Accidental release measures 6.1. Personal precautions, protective equipment and For non-emergency personnel Emergency procedures For emergency responders Protective equipment 6.2. Environmental precautions Avoid release to the environment. : Water spray. Dry powder. Foam. Carbon dioxide. : Flammable liquid and vapour. : Toxic fumes may be released Methods and material for containment and cleaning up Methods for cleaning up Other information : Do not attempt to take action without suitable protective equipment. Self-contained breathing apparatus. Complete protective clothing. emergency procedures : Ventilate spillage area. No open flames, no sparks, and no smoking. Avoid contact with skin and eyes. : Do not attempt to take action without suitable protective equipment. For further information refer to section 8: "Exposure controls/personal protection". : Take up liquid spill into absorbent material. Notify authorities if product enters sewers or public waters. : Dispose of materials or solid residues at an authorized site. 2/7

3 6.4. Reference to other sections For further information refer to section 13. SECTION 7: Handling and storage 7.1. Precautions for safe handling Precautions for safe handling Hygiene measures 7.2. Conditions for safe storage, including Storage conditions : Ensure good ventilation of the work station. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Use only non-sparking tools. Take precautionary measures against static discharge. Flammable vapours may accumulate in the container. Use explosion-proof equipment. Wear personal protective equipment. Avoid contact with skin and eyes. : Wash contaminated clothing before reuse. Do not eat, drink or smoke when using this product. Always wash hands after handling the product. any incompatibilities : Store in a well-ventilated place. Keep cool. Keep container tightly closed Specific end use(s) SECTION 8: Exposure controls/personal protection 8.1. Control parameters 8.2. Exposure controls Appropriate engineering controls Hand protection Eye protection Skin and body protection Respiratory protection Environmental exposure controls : Ensure good ventilation of the work station. : Protective gloves : Safety glasses : Wear suitable protective clothing : In case of insufficient ventilation, wear suitable respiratory equipment : Avoid release to the environment. SECTION 9: Physical and chemical properties 9.1. Information on basic physical and chemical properties Physical state : Liquid Colour : Grey Odour : Characteristic Odour threshold ph Relative evaporation rate (butylacetate=1) Melting point : Not applicable Freezing point Boiling point Flash point Ignition temperature : 42 C Decomposition temperature Flammability (solid, gas) : Not applicable Vapour pressure : 6.7 hpa Relative vapour density at 20 C Relative density Density : g/cm³ Solubility : Water: Non-soluble Log Pow Viscosity, kinematic Viscosity, dynamic : mpa.s Explosive properties Oxidising properties 3/7

4 Explosive limits 9.2. Other information SECTION 10: Stability and reactivity Reactivity Flammable liquid and vapour Chemical stabil ity Stable under normal conditions Possibility of hazardous reactions No dangerous reactions known under normal conditions of use Conditions to avoid Avoid contact with hot surfaces. Heat. No flames, no sparks. Eliminate all sources of ignition Incompatible materials Hazardous decomposition products Under normal conditions of storage and use, hazardous decomposition products should not be produced. SECTION 11: Toxicological information Information on toxicological effects Acute toxicity Skin corrosion/irritation Serious eye damage/irritation Respiratory or skin sensitisation Germ cell mutagenicity Carcinogenicity Reproductive toxicity STOT-single exposure STOT-repeated exposure Aspiration hazard : Causes skin irritation. SECTION 12: Ecological information Toxicity Ecology - general Acute aquatic toxicity Chronic aquatic toxicity : The product is not considered harmful to aquatic organisms nor to cause long-term adverse effects in the environment Persistence and degradability Bioaccumulative potential KEMSEAL SP2 PRIMER- (A) COMPONENT Bioaccumulative potential Mobility in soil KEMSEAL SP2 PRIMER- (A) COMPONENT Mobility in soil Results of PBT and vpvb assessment Other adverse effects Ozone Other adverse effects : 4/7

5 KEMSEAL 2K300/SP2 PRIMER- (A) COMPONENT GWPmix comment : No known effects from this product. SECTION 13: Disposal considerations Waste treatment methods Waste treatment methods : Dispose of contents/container in accordance with licensed collector s sorting instructions. Additional information : Flammable vapours may accumulate in the container. SECTION 14: Transport information In accordance with ADR / RID / IMDG / IATA / ADN ADR IMPG IATA ADN RID 14.1 UN number UN proper Shipping name COATING SOLUTION COATING SOLUTION Coating solution COATING SOLUTION COATING SOLUTION COATING SOLUTION COATING SOLUTION Coating solution COATING SOLUTION COATING SOLUTION Transport document description UN 1139 COATING UN 1139 COATING SOLUTION, 3, III, (D/E) SOLUTION, 3, III UN 1139 Coating solution, 3, III UN 1139 COATING SOLUTION, 3, III UN 1139 COATING SOLUTION, 3, III Transport hazard class(es) Packing group III III III III III Environmental hazards Marine pollutant : No Special precautions for user - Overland transport Classification code (ADR) Special provisions (ADR) Limited quantities (ADR) Excepted quantities (ADR) Packing instructions (ADR) Mixed packing provisions (ADR) Portable tank and bulk container instructions (ADR) Portable tank and bulk container special provisions (ADR) Tank code (ADR) Vehicle for tank carriage : F1 : 640E : 5l No supplementary information available : P001, IBC03, LP01, R001 : MP19 : T2 : TP1 : LGBF : FL Transport category (ADR) : 3 Special provisions for carriage - Packages (ADR) Special provisions for carriage - Operation (ADR) : V12 : S2 Hazard identification number (Kemler No.) : 30 Orange plates : Tunnel restriction code (ADR) : D/E 5/7

6 KEMSEAL 2K300/SP2 PRIMER- (A) COMPONENT - Transport by sea Special provisions (IMDG) : 955 Limited quantities (IMDG) Excepted quantities (IMDG) Packing instructions (IMDG) IBC packing instructions (IMDG) Tank instructions (IMDG) Tank special provisions (IMDG) EmS-No. (Fire) EmS-No. (Spillage) Stowage category (IMDG) Properties and observations (IMDG) - Air transport PCA Excepted quantities (IATA) PCA Limited quantities (IATA) PCA limited quantity max net quantity (IATA) : 5 L : P001, LP01 : IBC03 : T2 : TP1 : F-E : S-E : A : Miscibility with water depends upon the composition. : Y344 : 10L PCA packing instructions (IATA) : 355 PCA max net quantity (IATA) : 60L CAO packing instructions (IATA) : 366 CAO max net quantity (IATA) Special provisions (IATA) ERG code (IATA) - Inland waterway transport Classification code (ADN) Special provisions (ADN) Limited quantities (ADN) Excepted quantities (ADN) Equipment required (ADN) Ventilation (ADN) : 220L : A3 : 3L : F1 : 640E : 5 L Number of blue cones/lights (ADN) : 0 - Rail transport Classification code (RID) Special provisions (RID) Limited quantities (RID) Excepted quantities (RID) Packing instructions (RID) Mixed packing provisions (RID) Portable tank and bulk container instructions (RID) Portable tank and bulk container special provisions (RID) Tank codes for RID tanks (RID) : PP, EX, A : VE01 : F1 : 640E : 5L : P001, IBC03, LP01, R001 : MP19 : T2 : TP1 Transport category (RID) : 3 Special provisions for carriage Packages (RID) Colis express (express parcels) (RID) : LGBF : W12 : CE4 Hazard identification number (RID) : Transport in bulk according to Annex II of MARPOL 73/78 and the IBC Code Not applicable 6/7

7 SECTION 15: Regulatory information Safety, health and environmental regulations/legislation specific for the substance or mixture National regulations Regulatory reference : Waste Management Regulation published in the Official Journal numbered on April 2, 2015 Regulation on Test Methods that will be Applied to Determine the Physicochemical, Toxicological and Ecotoxicological Properties of Substances and Mixtures published in the Official Journal numbered on December 11, 2013 Regulation on Health and Safety Precautions When Working with Chemical Substances published in the Official Journal numbered on August 12, 2013 Regulation on Inventory and Control of Chemicals published in the Official Journal numbered on December 26, 2008 Regulation on Restriction and Prohibition of Hazardous Substances and Mixtures published in the Official Journal numbered on December 26, This product doesn t contain any substances that is controlled or prohibited for use according to the Regulation for Reduction of Ozone Depleting Substances published in the Official Journal numbered on November 12, SECTION 16: Other information Full text of H-statements Acute Tox. 4 (Dermal) Acute toxicity (dermal), Category 4 Acute Tox. 4 (Inhalation) Acute toxicity (inhal.), Category 4 Flam. Liq. 3 Flammable liquids, Category 3 Skin Irrit. 2 Skin corrosion/irritation, Category 2 H226 Flammable liquid and vapour. H312 Harmful in contact with skin. H315 Causes skin irritation. H332 Harmful if inhaled. author's Name : Irem Bekas Kar Certificate number : GBF-A This information is based on our current knowledge and is intended to describe the product for the purposes of health, safety and environmental requiremen ts only. It should not therefore be construed as guaranteeing any specific property of the product 7/7