SAFETY DATA SHEET According to Safe Work Australia

Transcription

1 Page 1 1. IDENTIFICATION: PRODUCT IDENTIFIER AND CHEMICAL IDENTITY Product Name: STRESS-EX Other Means of Identification: Mixture Recommended Use of the Chemical and Restriction on Use: Stress relief agent and anti-transpirant. Details of Manufacturer or Importer: Agspec Australia Pty Ltd Lot 1, Wandilo Road Wandilo, via Mt Gambier, SA 5290 Phone Number: Emergency telephone number: HAZARDS IDENTIFICATION Hazardous Nature: Not classified as Hazardous according to the Globally Harmonised System of Classification and Labelling of Chemicals (GHS) and Safe Work Australia criteria. Not classified as Dangerous Goods according to the Australian Code for the Transport of Dangerous Goods by Road and Rail. (7th edition) The product is not classified according to the Globally Harmonised System (GHS). Signal Word Void Hazard Statements Void 3. COMPOSITION AND INFORMATION ON INGREDIENTS Chemical Characterization: Mixtures Description: No reportable hazardous substances or complex substances. Hazardous Components: Void Non Hazardous Components: Di-1-p-menthene 90.4% 4. FIRST AID MEASURES Inhalation: If inhaled, remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Seek medical attention if breathing problems develop. Skin Contact: In case of skin contact, immediately remove contaminated clothing and wash affected areas with water and soap. Seek medical attention if symptoms occur. Eye Contact: In case of eye contact, rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Seek medical attention. Ingestion: If swallowed, do not induce vomiting. Do not give anything by mouth to an unconscious person. Seek immediate medical attention. (Contd. on page 2)

2 Page 2 Symptoms Caused by Exposure: Inhalation: Breathing in mists or aerosols may produce respiratory irritation. Skin Contact: May cause itchiness or slight skin reddening. Ingestion: May cause nausea and vomiting. 5. FIRE FIGHTING MEASURES Suitable Extinguishing Media: Fine water spray, carbon dioxide, foam or dry agent. Specific Hazards Arising from the Chemical: This product is a combustible liquid C2 (flash point > 200 C). Hazardous combustion products include toxic fumes. Special Protective Equipment and Precautions for Fire Fighters: When fighting a major fire wear self-contained breathing apparatus and protective equipment. 6. ACCIDENTAL RELEASE MEASURES (Contd. of page 1) Personal Precautions, Protective Equipment and Emergency Procedures: Wear approved respiratory protection, chemical resistant gloves, protective clothing and safety boots. Evacuate all non-essential personnel from affected area. Do not breathe vapours. Ensure adequate ventilation. Extinguish all sources of ignition. Avoid sparks and open flames. No smoking. Environmental Precautions: In the event of a major spill, prevent spillage from entering drains or water courses. Methods and Materials for Containment and Cleaning Up: Stop leak if safe to do so and absorb spill with sand, earth, vermiculite or some other absorbent material. Collect the spilled material and place into a suitable container for disposal. 7. HANDLING AND STORAGE Precautions for Safe Handling: Use of safe work practices are recommended to avoid eye or skin contact and inhalation of vapours. Food, beverages and tobacco products should not be stored or consumed where this material is in use. Always wash hands before smoking, eating, drinking or using the toilet. Wash contaminated clothing and other protective equipment before storage or re-use. Provide eyewash fountains and safety showers in close proximity to points of potential exposure. Conditions for Safe Storage: Store in a cool, dry and well ventilated area. Keep container tightly closed when not in use. Protect from heat, sparks, open flames and other sources of ignition. Keep away from strong oxidising agents and acid catalysts. 8. EXPOSURE CONTROLS AND PERSONAL PROTECTION Exposure Standards: The product does not contain any relevant quantities of materials with critical values that have to be monitored at the workplace. Engineering Controls: Ensure adequate ventilation of the working area. Respiratory Protection: Use approved vapour respirator under conditions where exposure to the substance is apparent (e.g. generation of high concentrations of mist or vapour, inadequate ventilation, development of respiratory tract irritation) and engineering controls are not feasible. See Australian Standards AS/NZS 1715 and 1716 for more information. Skin Protection: PVC, PVA, nitrile, neoprene, rubber or vinyl gloves. See Australian/New Zealand Standard AS/NZS 2161 for more information. (Contd. on page 3)

3 Page 3 (Contd. of page 2) When selecting gloves for use against certain chemicals, the degradation resistance, permeation rate and permeation breakthrough time should be considered. Occupational protective clothing (depending on conditions in which it has to be used, in particular as regards the period for which it is worn, which shall be determined on the basis of the seriousness of the risk, the frequency of exposure to the risk, the characteristics of the workstation of each worker and the performance of the protective clothing). See Australian/New Zealand Standard AS/NZS 4501 for more information. Eye and Face Protection: Eye and face protectors for protection against splashing materials or liquids. See Australian/New Zealand Standard AS/NZS 1337 for more information. 9. PHYSICAL AND CHEMICAL PROPERTIES Appearance: Form: Liquid Colour: Clear amber Odour: Terpene odour Odour Threshold: ph-value: 7 Melting point/melting range: No information available Initial Boiling Point/Boiling Range: No information available Flash Point: >200 C Flammability: Combustible Liquid Class 2 Auto-ignition Temperature: Decomposition Temperature: Explosion Limits: Lower: Upper: Vapour Pressure: Density: Relative Density at 20 C: 0.96 Vapour Density: Evaporation Rate: Solubility in Water: Emulsifies into water. Partition Coefficient (n-octanol/water): 10. STABILITY AND REACTIVITY Possibility of Hazardous Reactions: Hazardous polymerisation will not occur. Chemical Stability: Stable at ambient temperature and under normal conditions of use. Conditions to Avoid: Heat, sparks, open flames and other sources of ignition. Incompatible Materials: Strong oxidising agents and acid catalysts. Hazardous Decomposition Products: Toxic fumes 11. TOXICOLOGICAL INFORMATION Toxicity: Acute Health Effects Inhalation: Breathing in mists or aerosols may produce respiratory irritation. Skin: May cause itchiness or slight skin reddening. Eye: May cause nausea and vomiting. Skin Corrosion / Irritation: Based on classification principles, the classification criteria are not met. (Contd. on page 4)

4 Page 4 (Contd. of page 3) Serious Eye Damage / Irritation: Based on classification principles, the classification criteria are not met. Respiratory or Skin Sensitisation: Based on classification principles, the classification criteria are not met. Germ Cell Mutagenicity: Based on classification principles, the classification criteria are not met. Carcinogenicity: This product does NOT contain any IARC listed chemicals. Reproductive Toxicity: Based on classification principles, the classification criteria are not met. Specific Target Organ Toxicity (STOT) - Single Exposure: Based on classification principles, the classification criteria are not met. Specific Target Organ Toxicity (STOT) - Repeated Exposure: Based on classification principles, the classification criteria are not met. Aspiration Hazard: Based on classification principles, the classification criteria are not met. Chronic Health Effects: No information available Existing Conditions Aggravated by Exposure: No information available 12. ECOLOGICAL INFORMATION Ecotoxicity: Essentially non toxic to bees and earthworms. Aquatic toxicity: Toxic to aquatic organisms. May cause long-term adverse effects in the aquatic environment. Persistence and Degradability: Di-1-p-menthene is degraded in soils by microorganisms in approximately 15 days. However, it is not readily degradable in water and is partly soluble in water. Bio accumulative Potential: No information available Mobility in Soil: No information available Other adverse effects: No information available 13. DISPOSAL CONSIDERATIONS Disposal Methods and Containers: Dispose according to applicable local and state government regulations. Special Precautions for Landfill or Incineration: Please consult your state Land Waste Management Authority for more information. 14. TRANSPORT INFORMATION UN Number Proper Shipping Name Dangerous Goods Class Class: IMDG Class: Packing Group: UN3082 Environmentally hazardous substance, liquid, N.O.S. 9 Miscellaneous dangerous substances and articles. III (Contd. on page 5)

5 Page 5/5 (Contd. of page 4) Marine pollutant: EMS Number: Yes F-A,S-A Hazchem Code:.3Z Special Provisions: Limited Quantities: Packagings & IBCs - Packing Instruction: 179, 274, 331, 335, AU01 5L P001, IBC03, LP01 Packagings & IBCs - Special Packing Provisions: PP1 Portable Tanks & Bulk Containers - Instructions: T4 Portable Tanks & Bulk Containers - Special Provisions: 15. REGULATORY INFORMATION TP1, TP29 Australian Inventory of Chemical Substances: This chemical is not found in AICS. Standard for the Uniform Scheduling of Drugs and Poisons (SUSMP) - Poison Schedule: Not Scheduled. 16. OTHER INFORMATION Date of Preparation or Last Revision: Prepared by: Abbreviations and acronyms: : Australian Dangerous Goods IMDG: International Maritime Code for Dangerous Goods IATA: International Air Transport Association GHS: Globally Harmonised System of Classification and Labelling of Chemicals CAS: Chemical Abstracts Service (division of the American Chemical Society) IARC: International Agency for Research on Cancer STEL: Short Term Exposure Limit TWA: Time Weighted Average NES: National Exposure Standard (Safe Work Australia - Workplace Exposure Standards For Airborne Contaminants) Disclaimer This SDS is prepared in accord with the Safe Work Australia document Code of Practice for the Preparation of Safety Data Sheets for Hazardous Chemicals - December 2011 The information contained in this safety data sheet is provided in good faith and is believed to be accurate at the date of issuance. Agspec Australia Pty Ltd makes no representation of the accuracy or comprehensiveness of the information and to the full extent allowed by law excludes all liability for any loss or damage related to the supply or use of the information in this material safety data sheet. Agspec Australia Pty Ltd is not in a position to warrant the accuracy of the data herein. The user is cautioned to make their own determinations as to the suitability of the information provided to the particular circumstances in which the product is used.