SAFETY DATA SHEET. ProCoustic Acoustical Tile & Ceiling Coating Other Names - Product Use

Transcription

1 1. IDENTIFICATION OF THE MATERIAL AND SUPPLIER Product Name ProCoustic Acoustical Tile & Ceiling Coating Other Names - Product Use Coating Company Name Metropolis Projects Group Pty Ltd T/As Procoat Systems Address 29 Gladys Road Lesmurdie WA 6076 Telephone Number Emergency Telephone HAZARDS IDENTIFICATION Not classified as a physical hazard under GHS criteria. Not classified as a health hazard under GHS criteria. Not classified as an environmental hazard under GHS criteria. GHS Label Elements Including Precautionary Statements Prevention Response Storage Disposal 3. COMPOSITION / INFORMATION ON INGREDIENTS Chemical Characterisation Mixture Hazardous Ingredients CAS No Concentration Limestone % Titanium dioxide % Kaolin % 26/11/2012 1/6

2 4. FIRST AID MEASURES Inhalation Ingestion Skin Eyes Remove to fresh air. If breathing is difficult apply oxygen. If breathing has stopped, apply artificial respiration. Seek immediate medical attention. If swallowed, do not induce vomiting. Never give anything by mouth to an unconscious person. Seek immediate medical attention. In case of skin contact, immediately remove contaminated clothing and wash affected areas with water and soap. Seek medical attention if symptoms persist. Launder clothing before reuse. In case of eye contact, rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Seek immediate medical attention. 5. FIRE FIGHTING MEASURES Suitable Extinguishing Media Hazardous Combustion Products Special Protective Equipment and Precautions for Fire Fighters Unusual Fire or Explosion Hazards Hazchem Code For major fires call the Fire Brigade. Ensure that an escape path is available from any fire. Water spray, chemical powder, carbon dioxide and foam. Wear Safe Work Australia approved self-contained breathing apparatus and full protective clothing. There are no special fire hazards from this product. Not allocated. 6. ACCIDENTAL RELEASE MEASURES Personal Precautions, Protective Equipment and Emergency Procedures Environmental Precautions Methods and Materials for Containment and Cleaning Up Wear Safe Work Australia approved self-contained breathing apparatus and full protective clothing. Evacuate all non-essential personnel from affected area. Ensure adequate ventilation. Do not breathe vapours. In the event of a major spill, prevent spillage from entering drains or water courses. Stop leak if safe to do so and contain spill. Absorb onto vermiculite, dry sand or earth and place in a suitable, labelled container for subsequent disposal. 7. HANDLING AND STORAGE Precautions for Safe Use of safe work practices are recommended to avoid eye or skin 26/11/2012 2/6

3 Handling Conditions for Safe Storage contact and inhalation of vapours. Food, beverages and tobacco products should not be stored or consumed where this material is in use. Always wash hands before smoking, eating, drinking or using the toilet. Wash contaminated clothing and other protective equipment before storage or re-use. Provide eyewash fountains and safety showers in close proximity to points of potential exposure. Store in a tightly closed original container in a cool, dry, and well ventilated area. Do not store in aluminum, tin or titanium containers. Protect from freezing. 8. EXPOSURE CONTROLS/PERSONAL PROTECTION Control Parameters - Exposure Standards (Safe Work Australia) Engineering Controls Personal Protective Equipment (PPE) Respiratory Protection Eye/Face Protection Skin Protection Thermal Hazards Limestone: TWA: - ppm / 10 mg/m 3 STEL: - ppm / - mg/m 3 Titanium oxide (TiO 2 ): TWA: - ppm /10 mg/m 3 STEL: - ppm / - mg/m 3 Kaolin: TWA: - ppm / 10 mg/m 3 STEL: - ppm / - mg/m 3 Provide exhaust ventilation or other engineering controls to keep the airborne concentrations of vapours below occupational exposure standards. Use a Safe Work Australia approved mist respirator where spray mist occurs. See Australian Standards AS/NZS 1715 and 1716 for more information. Safety glasses with top and side shields or goggles. See Australian Standards AS/NZS 1336 and 1337 for more information. Chemical resistant protective gloves, protective clothing, apron and boots. See Australian Standards AS/NZS 2161, and for more information. 9. PHYSICAL AND CHEMICAL PROPERTIES Appearance White or tinted, smooth liquid Odour Pleasant pine scent ph 10.4 Freezing Point 0 C Initial Boiling Point / Range 100 C Flash Point (Tag Closed Cup) Evaporation Rate <1 Flammability Non flammable 26/11/2012 3/6

4 Lower Flammability or Explosive Limit Upper Flammability or Explosive Limit Vapour Pressure 24 mm Hg Vapour Density Heavier than air Relative Density (Specific Gravity) 1.32 Solubility in Water Immiscible (binder is an emulsion) Auto-ignition Temperature Decomposition Temperature Percent Volatile 10. STABILITY AND REACTIVITY Chemical Stability Possibility of Hazardous Reactions Conditions to Avoid Incompatible Materials Hazardous Decomposition Products Stable at ambient temperature and under normal conditions of use. Will not occur. Freezing. Strong oxidizing agents such as nitric acid or permanganates. 11. TOXICOLOGICAL INFORMATION Toxicity Acute Health Effects Titanium dioxide: Oral LD 50 (rat) > mg/kg Dermal LD 50 (rabbit) > 1000 mg/kg Inhalation LC 50 (rat) > 6.82 mg/l / 4 hr Slightly hazardous in case of skin and eye contact, ingestion and inhalation. Inhalation: May cause respiratory tract irritation, burning pain in nose and throat. Spray may damage respiratory tract. Ingestion: Not a normal route of exposure. May be harmful if ingested. Eye: May cause eye irritation. Symptoms include discomfort or pain, excess blinking, lacrimation and redness. Skin: May cause skin irritation, characterized by itching or burning sensation. Skin Corrosion/Irritation Serious Eye Damage/Irritation Respiratory or Skin Sensitisation Germ Cell Mutagenicity Carcinogenicity Reproductive Toxicity Titanium dioxide is classified by IARC as a Group 2B - Possibly carcinogenic to humans. 26/11/2012 4/6

5 Specific Target Organ Toxicity (STOT) - Single Exposure Specific Target Organ Toxicity (STOT) - Repeated Exposure Aspiration Hazard Chronic Health Effects Existing Conditions Aggravated by Exposure 12. ECOLOGICAL INFORMATION Ecotoxicity Persistence and Degradability Bio-accumulative Potential Mobility in Soil High ph (alkalinity) of undiluted or un-neutralised material is harmful to aquatic life 13. DISPOSAL CONSIDERATIONS Disposal methods and containers Special precautions for landfill or incineration Dispose according to applicable local and state government regulations. Please consult your state Land Waste Management Authority for more information. 14. TRANSPORT INFORMATION Not classified as a dangerous good according to the Australian Code for the Transport of Dangerous goods by road or rail (ADG 7). UN Number Proper Shipping Name Dangerous Goods Class Subsidiary Risk Hazchem Code Packing Group Special Provisions Limited Quantities Packagings & IBCs - Packing Instruction Packagings & IBCs - Special Packing Provisions Portable Tanks & Bulk Containers Instructions Portable Tanks & Bulk Containers Special Provisions SEA TRANSPORT IMDG 26/11/2012 5/6

6 UN Number Proper Shipping Name Dangerous Goods Class Packing Group AIR TRANSPORT ICAO / IATA UN Number Proper Shipping Name Dangerous Goods Class Packing Group 15. REGULATORY INFORMATION Limestone, titanium dioxide and limestone are listed in the Australian Inventory of Chemical Substances (AICS). 16. OTHER INFORMATION Last Revision of MSDS Rev 1.0 (26/11/2012) Prepared by MSDS.COM.AU Pty Ltd Abbreviations Used GHS: Globally Harmonised System of Classification and Labeling of Chemicals IARC: International Agency for Research on Cancer STEL: Short term exposure limit TWA: Time weighted average Emergency Contacts Metropolis Projects Group Pty Ltd T/As Procoat Systems Metropolis Projects Group Pty Ltd T/As Procoat Systems - Emergency Number Police and Fire Brigade Poisons Information Centre The information contained in this material safety data sheet is provided in good faith and is believed to be accurate at the date of issuance. Metropolis Projects Group Pty Ltd T/As Procoat Systems makes no representation of the accuracy or comprehensiveness of the information and to the full extent allowed by law excludes all liability for any loss or damage related to the supply or use of the information in this material safety data sheet. MSDS.COM.AU Pty Ltd is not in a position to warrant the accuracy of the data herein. The user is cautioned to make their own determinations as to the suitability of the information provided to the particular circumstances in which the product is used. This MSDS is prepared in accord with the Safe Work Australia document Code of Practice for the Preparation of Safety Data Sheets for Hazardous Chemicals - December /11/2012 6/6