Roth International, Ltd. NFPA

Size: px

Start display at page:

Download "Roth International, Ltd. NFPA"

Amanda Hodge
5 years ago
Views:

1 Roth International, Ltd. NFPA Eugenol USP SECTION 1 : Chemical Product and Company Identification MSDS Name: Eugenol USP Manufacturer Name:Chr. Hansen, Inc. Department: Dental Products Manufacturing Division Manufacturer MSDS Revision Date: 02/01/2002 Trade Names: CAS Number: NFPA Health: 0 Flammability: 0 Reactivity: 0 Other: Distributor Name: Roth International, Ltd. Distributor Address: 669 West Ohio Street Chicago, Illinois Emergency Telephone Number: Internet: Distributor Telephone: Fema No: 2467 SECTION 2 : Hazardous Ingredients/Identity Information Chemical Name CAS# Eugenol Hazardous: Yes SECTION 3 : Physical And Chemical Characteristics Physical State/Appearance:

2 Clear Liquid Color: Colorless Odor: Characteristic Odor. Vapor Pressure: Vapor Density: (Air = 1): Greater Than 1 Boiling Point: Melting Point: Solubility: In H2O: Insoluble Specific Gravity: (H2O = 1.0): FlashPoint: 200 deg F Flash Point: 200 deg F SECTION 4 : Fire And Explosion Hazards Flash Point Method: Tag Closed Cup Extinguishing Media: CO2, Foam, Dry chemical Fire Fighting Instructions: Keep containers cool with fine water spray. Unusual Fire Hazards: None Known. Dot Hazard Classification: Non-Combustible SECTION 5 : Health Hazards Eugenol :

3 Route of Exposure: Skin Potential Health Effects: Health Hazard Determination: This product is a "Mixture" for which no health hazard data exist. The Hazard Communication Standard requires that such mixtures be assumed to present the same health hazards as do components that constitute at least 1% of the mixture (0.1 for carcinogens) although OSHA has noted that the hazards of individual components may be altered by including them in a mixture. Carcinogenicity: Has the substance been listed as a Carcinogen or Potential Carcinogen in the "Annual Report on Carcinogens" published by NTP, by the International Agency for Research on Cancer, or by OSHA: No Signs/Symptoms: None Known Other Potential Health Effects: Overall Determination: Liquid may be irritating to eyes and skin Repeated contact may cause contact dermatitis. Aggravation of Pre-Existing Conditions: None Known This product is a mixture some components of which we consider to be a trade secret. SECTION 6 : Emergency And First Aid Procedures Eye Contact: Rinse with copious amounts of water - see physician Skin Contact: Wash with soap and water Inhalation: Remove to fresh air Other First Aid: None SECTION 7 : Reactivity Data Chemical Stability: Presents no significant reactivity hazard. Conditions to Avoid: Avoid strong oxidizing agents. Incompatibilities with Other Materials: Avoid strong oxidizing agents.

4 Hazardous Polymerization: None. Hazardous Decomposition Products: Burning liberates CO, CO2 and smoke. Does not undergo explosive decomposition, is shock stable, and is not an oxygen donor. Does not form explosive mixtures with organic materials. SECTION 8 : Precautions For Safe Handling Spill Cleanup Measures: Eliminate all sources of ignition. Small Spill: Small spills can be flushed with water or soaked up with absorbent. Contain and absorb by the use of sand, or inert power. Handling: Keep away from heat and flame. Keep container closed when not in use. Use with adequate ventilation. Storage: Store in cool dry area protected from direct sunlight. Waste Disposal: Should be disposed of by a responsible contractor according to federal, state or local ordinances, or incinerated in keeping with all Environmental Protection Agency regulations. DOT Hazard Class: Non-Combustible SECTION 9 : Control Measures Ventilation System: Special ventilation facilities are not normally required for the handling of flavor fragrance compounds provided that adequate air circulation is maintained within the working area. Skin Protection Description: Prevent contaminated clothes. Wash affected area with water (or soap and water) if irritation persists obtain medical advice. Eye/Face Protection: Irrigate copiously with water for at least ten minutes. Obtain medical advice. Respiratory Protection: No special procedures normally required. If excessive exposure produces adverse affects remove the individual to fresh air and keep at rest. Obtain medical advice if any symptoms persist. Other Protective: Measures should be taken to prevent contact with eyes and skin.

5 Exposure Limits: Threshold limit value (TLV): None Established. OSHA Permissible Exposure Limit (PEL): None Established. SECTION 10 : Other Information NFPA: Fire Hazard: 0 Health: 0 Reactivity: 0 Specific Hazard: MSDS Revision Date: 02/01/2002 MSDS Author: D. Makarewicz Disclaimer: The information in this MSDS was obtained from current and reputable sources However, the data is provided without any warranty express or implied regarding its correctiveness or accuracy, it is the user's responsibility both to determine safe conditions for use of this product and to assume liability for loss, injury, damage or expense resulting from improper use of this product. Chemical and Common Names: This material is a mixture. 5M Copyright Actio Corporation. All Rights Reserved.

SECTION 1 : Chemical Product and Company Identification EMERGENCY TELEPHONE NUMBER: CHEMTREC

Uline Aluminum Foil Tape SECTION 1 : Chemical Product and Company Identification MSDS Name: Aluminum Foil Tape Distributor Name:Uline Distributor Address: 2200 S. Lakeside Drive Waukegan, IL 60085 EMERGENCY