BISON SILICONE HIGH TEMPERATURE RED CRT 280ML*12 L133*

Transcription

1 DPD Declaration Page 1/7 Printing date 08/06/2014 Reviewed on 05/07/ Identification. Product identifier.. Relevant identified uses of the substance or mixture and uses advised against No further relevant information available.. Application of the substance / the mixture Adhesives Sealant. Details of the supplier of the safety data sheet. Manufacturer/Supplier: Bison International Dr.A.F.Philipsstraat 9 NL-4462 EW Goes PO Box 160 NL-4460 AD Goes tel fax e mail: msds@boltonadhesives.com. Information department: Bison QESH. Emergency telephone number: * 2 Hazard(s) identification. Classification of the substance or mixture. Classification according to Directive 67/548/EEC or Directive 1999/45/EC Not applicable.. Information concerning particular hazards for human and environment: The product does not have to be labelled due to the calculation procedure of the "General Classification guideline for preparations of the EU" in the latest valid version.. Classification system: The classification was made according to the latest editions of international substances lists, and expanded upon from company and literature data.. Label elements. Labelling according to EU guidelines: Observe the general safety regulations when handling chemicals. The product is not subject to identification regulations according to directives on hazardous materials.. Safety phrases: Avoid contact with skin and eyes. Use only in well-ventilated areas.. Classification system:. NFPA ratings (scale 0-4) Health = 0 Fire = 0 Reactivity = 0 (Contd. on page 2) USA 1/14

2 Page 2/7 DPD Declaration Printing date 08/06/2014 Reviewed on 05/07/2014. Other hazards. Results of PBT and vpvb assessment. PBT: Not applicable.. vpvb: Not applicable. (Contd. of page 1) 3 Composition/information on ingredients. Chemical characterization: Mixtures. Description: Sealant. Dangerous components: triacetoxyethylsilane %. Additional information: As the product vulcanises acetic acid (CAS ) is produced. For the wording of the listed risk phrases refer to section First-aid measures. Description of first aid measures. General information: No special measures required.. After inhalation: Supply fresh air; consult doctor in case of complaints.. After skin contact: Generally the product does not irritate the skin.. After eye contact: Rinse opened eye for several minutes under running water.. After swallowing: If symptoms persist consult doctor.. Most important symptoms and effects, both acute and delayed No further relevant information available.. Indication of any immediate medical attention and special treatment needed No further relevant information available. 5 Fire-fighting measures. Extinguishing media. Suitable extinguishing agents: CO2, extinguishing powder or water spray. Fight larger fires with water spray or alcohol resistant foam.. Special hazards arising from the substance or mixture No further relevant information available.. Advice for firefighters. Protective equipment: No special measures required. 6 Accidental release measures. Personal precautions, protective equipment and emergency procedures Not required.. Environmental precautions: Do not allow to enter sewers/ surface or ground water.. Methods and material for containment and cleaning up: Absorb with liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust).. Reference to other sections See Section 7 for information on safe handling. See Section 8 for information on personal protection equipment. See Section 13 for disposal information. 7 Handling and storage. Precautions for safe handling No special measures required. Ensure good ventilation/exhaustion at the workplace. (Contd. on page 3) USA 2/14

3 Page 3/7 DPD Declaration Printing date 08/06/2014 Reviewed on 05/07/2014 (Contd. of page 2). Information about protection against explosions and fires: No special measures required.. Conditions for safe storage, including any incompatibilities. Storage:. Requirements to be met by storerooms and receptacles: No special requirements.. Information about storage in one common storage facility: Not required.. Further information about storage conditions: None.. Specific end use(s) No further relevant information available. 8 Exposure controls/personal protection. Additional information about design of technical systems: No further data; see item 7.. Control parameters. Components with limit values that require monitoring at the workplace: The product does not contain any relevant quantities of materials with critical values that have to be monitored at the workplace.. Additional information: The lists that were valid during the creation were used as basis.. Exposure controls. Personal protective equipment:. General protective and hygienic measures: The usual precautionary measures for handling chemicals should be followed.. Breathing equipment: Not required.. Protection of hands: Protective gloves The glove material has to be impermeable and resistant to the product/ the substance/ the preparation. Due to missing tests no recommendation to the glove material can be given for the product/ the preparation/ the chemical mixture. Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation. Material of gloves The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies from manufacturer to manufacturer. As the product is a preparation of several substances, the resistance of the glove material can not be calculated in advance and has therefore to be checked prior to the application.. Penetration time of glove material The exact break trough time has to be found out by the manufacturer of the protective gloves and has to be observed.. Eye protection: Goggles recommended during refilling. * 9 Physical and chemical properties. Information on basic physical and chemical properties. General Information. Appearance: Form: Fluid Color: According to product specification. Odor: Characteristic (Contd. on page 4) USA 3/14

4 Page 4/7 DPD Declaration Printing date 08/06/2014 Reviewed on 05/07/2014 (Contd. of page 3). Odour threshold:. ph-value:. Change in condition Melting point/melting range: Undetermined. Boiling point/boiling range: 2230 C (4046 F). Flash point: Not applicable.. Flammability (solid, gaseous): Not applicable.. Ignition temperature: > 370 C (> 698 F). Decomposition temperature:. Auto igniting: Product is not selfigniting.. Danger of explosion: Product does not present an explosion hazard.. Explosion limits: Lower: Upper:. Vapor pressure:. Density:. Relative density. Vapour density. Evaporation rate. Solubility in / Miscibility with Water: Not miscible or difficult to mix.. Partition coefficient (n-octanol/ water):. Viscosity: Dynamic at 20 C (68 F): mpas Kinematic: Organic solvents: 0.0 % Solids content: %. Other information No further relevant information available. 10 Stability and reactivity. Reactivity. Chemical stability. Thermal decomposition / conditions to be avoided: No decomposition if used according to specifications.. Possibility of hazardous reactions No dangerous reactions known.. Conditions to avoid No further relevant information available.. Incompatible materials: No further relevant information available.. Hazardous decomposition products: No dangerous decomposition products known. * 11 Toxicological information. Information on toxicological effects. Acute toxicity:. Primary irritant effect:. on the skin: No irritant effect.. on the eye: No irritating effect. (Contd. on page 5) USA 4/14

5 Page 5/7 DPD Declaration Printing date 08/06/2014 Reviewed on 05/07/2014 (Contd. of page 4). Sensitization: No sensitizing effects known.. Additional toxicological information: The product is not subject to classification according to internally approved calculation methods for preparations: When used and handled according to specifications, the product does not have any harmful effects according to our experience and the information provided to us.. Carcinogenic categories. IARC (International Agency for Research on Cancer) silicon dioxide, chemically prepared: 3. NTP (National Toxicology Program). OSHA-Ca (Occupational Safety & Health Administration) 12 Ecological information. Toxicity. Aquatic toxicity: No further relevant information available.. Persistence and degradability No further relevant information available.. Bioaccumulative potential No further relevant information available.. Mobility in soil No further relevant information available.. Additional ecological information:. General notes: Do not allow undiluted product or large quantities of it to reach ground water, water course or sewage system. Water hazard class 1 (Self-assessment): slightly hazardous for water. Results of PBT and vpvb assessment. PBT: Not applicable.. vpvb: Not applicable.. Other adverse effects No further relevant information available. 13 Disposal considerations. Waste treatment methods. Recommendation: Smaller quantities can be disposed of with household waste.. Uncleaned packagings:. Recommendation: Disposal must be made according to official regulations. Packagings that cannot be cleansed are to be disposed of in the same manner as the product. 14 Transport information. UN-Number. DOT, ADN, IMDG, IATA Void. UN proper shipping name. DOT, ADR, ADN, IMDG, IATA Void. Transport hazard class(es). DOT, ADR, ADN, IMDG, IATA. Class Void. Packing group. DOT, IMDG, IATA Void. Environmental hazards:. Marine pollutant: No (Contd. on page 6) USA 5/14

6 Page 6/7 DPD Declaration Printing date 08/06/2014 Reviewed on 05/07/2014. Special precautions for user Not applicable.. Transport in bulk according to Annex II of MARPOL73/78 and the IBC Code Not applicable.. Transport/Additional information: (Contd. of page 5). IMDG. Remarks: Under certain conditions substances in Class 3 (flammable liquids) can be classified in packinggroup III. See IMDG, Part 2, Chapter 2.3, Paragraph * 15 Regulatory information. Safety, health and environmental regulations/legislation specific for the substance or mixture. SARA Section 355 (extremely hazardous substances). SARA Section 313 (specific toxic chemical listings). TSCA (Toxic Substances Control Act) polydimethylsiloxane silicon dioxide, chemically prepared triacetoxyethylsilane iron oxide. Prop 65 - Chemicals known to cause cancer. Cancerogenity categories. EPA (Environmental Protection Agency). TLV (Threshold Limit Value established by ACGIH). MAK (German Maximum Workplace Concentration). NIOSH-Ca (National Institute for Occupational Safety and Health). Product related hazard informations: Observe the general safety regulations when handling chemicals. The product is not subject to identification regulations according to directives on hazardous materials.. Safety phrases: Avoid contact with skin and eyes. Use only in well-ventilated areas.. Chemical safety assessment: A Chemical Safety Assessment has not been carried out. 16 Other information This information is based on our present knowledge. However, this shall not constitute a guarantee for any specific product features and shall not establish a legally valid contractual relationship.. Department issuing MSDS: QESH Department (Contd. on page 7) USA 6/14

7 Page 7/7 DPD Declaration Printing date 08/06/2014 Reviewed on 05/07/2014. Contact: Reach coördinator. Date of preparation / last revision 08/06/2014 / 4. * Data compared to the previous version altered. (Contd. of page 6) USA 7/14

8 CLP Declaration Page 1/7 Printing date 08/06/2014 Reviewed on 07/05/ Identification. Product identifier.. Application of the substance / the mixture Adhesives Sealant. Details of the supplier of the safety data sheet. Manufacturer/Supplier: Bison International Dr.A.F.Philipsstraat 9 NL-4462 EW Goes PO Box 160 NL-4460 AD Goes tel fax e mail: msds@boltonadhesives.com. Information department: Bison QESH. Emergency telephone number: Composition/information on ingredients. Chemical characterization: Mixtures. Description: Sealant. Dangerous components: triacetoxyethylsilane %. Additional information: As the product vulcanises acetic acid (CAS ) is produced. * 3 Hazard(s) identification. Classification of the substance or mixture Eye Dam. 1 H318 Causes serious eye damage. Acute Tox. 4 H302 Harmful if swallowed. Skin Irrit. 2 H315 Causes skin irritation.. Label elements. GHS label elements The product is classified and labeled according to the Globally Harmonized System (GHS).. Hazard pictograms GHS05 GHS07. Signal word Danger. Hazard-determining components of labeling: triacetoxyethylsilane (Contd. on page 2) US-G 8/14

9 Page 2/7 CLP Declaration Printing date 08/06/2014 Reviewed on 07/05/2014. Hazard statements H302 Harmful if swallowed. H315 Causes skin irritation. H318 Causes serious eye damage.. Precautionary statements P270 P280 (Contd. of page 1) Do not eat, drink or smoke when using this product. Wear protective gloves/protective clothing/eye protection/face protection. P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P321 P362 P332+P313. Classification system:. NFPA ratings (scale 0-4) Specific treatment (see on this label). Take off contaminated clothing. If skin irritation occurs: Get medical advice/attention Health = 0 Fire = 0 Reactivity = 0 4 First-aid measures. General information: No special measures required.. After inhalation: Supply fresh air; consult doctor in case of complaints.. After skin contact: Generally the product does not irritate the skin.. After eye contact: Rinse opened eye for several minutes under running water.. After swallowing: If symptoms persist consult doctor. 5 Fire-fighting measures. Suitable extinguishing agents: CO2, extinguishing powder or water spray. Fight larger fires with water spray or alcohol resistant foam.. Special hazards arising from the substance or mixture No further relevant information available.. Protective equipment: No special measures required. 6 Accidental release measures. Personal precautions, protective equipment and emergency procedures Not required.. Environmental precautions: Do not allow to enter sewers/ surface or ground water.. Methods and material for containment and cleaning up: Absorb with liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust).. Reference to other sections See Section 7 for information on safe handling. See Section 8 for information on personal protection equipment. See Section 13 for disposal information. 7 Handling and storage. Precautions for safe handling No special measures required. Ensure good ventilation/exhaustion at the workplace.. Information about protection against explosions and fires: No special measures required. (Contd. on page 3) US-G 9/14

10 Page 3/7 CLP Declaration Printing date 08/06/2014 Reviewed on 07/05/2014 (Contd. of page 2). Storage:. Requirements to be met by storerooms and receptacles: No special requirements.. Information about storage in one common storage facility: Not required.. Further information about storage conditions: None.. Specific end use(s) No further relevant information available. 8 Exposure controls/personal protection. Additional information about design of technical systems: No further data; see item 7.. Components with limit values that require monitoring at the workplace: The product does not contain any relevant quantities of materials with critical values that have to be monitored at the workplace.. Additional information: The lists that were valid during the creation were used as basis.. Personal protective equipment:. General protective and hygienic measures: The usual precautionary measures for handling chemicals should be followed.. Breathing equipment: Not required.. Protection of hands: Protective gloves The glove material has to be impermeable and resistant to the product/ the substance/ the preparation. Due to missing tests no recommendation to the glove material can be given for the product/ the preparation/ the chemical mixture. Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation. Material of gloves The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies from manufacturer to manufacturer. As the product is a preparation of several substances, the resistance of the glove material can not be calculated in advance and has therefore to be checked prior to the application.. Penetration time of glove material The exact break trough time has to be found out by the manufacturer of the protective gloves and has to be observed.. Eye protection: Goggles recommended during refilling. * 9 Physical and chemical properties. General Information. Appearance: Form: Color:. Odor: Characteristic. Odour threshold: Fluid According to product specification. ph-value:. Change in condition Melting point/melting range: Undetermined. Boiling point/boiling range: 2230 C (4046 F) (Contd. on page 4) US-G 10/14

11 Page 4/7 CLP Declaration Printing date 08/06/2014 Reviewed on 07/05/2014 (Contd. of page 3). Flash point: Not applicable.. Flammability (solid, gaseous): Not applicable.. Ignition temperature: > 370 C (> 698 F). Decomposition temperature:. Auto igniting: Product is not selfigniting.. Danger of explosion: Product does not present an explosion hazard.. Explosion limits: Lower: Upper:. Vapor pressure:. Density:. Relative density. Vapour density. Evaporation rate. Solubility in / Miscibility with Water: Not miscible or difficult to mix.. Partition coefficient (n-octanol/ water):. Viscosity: Dynamic at 20 C (68 F): mpas Kinematic: Organic solvents: 0.0 % Solids content: %. Other information No further relevant information available. 10 Stability and reactivity. Thermal decomposition / conditions to be avoided: No decomposition if used according to specifications.. Incompatible materials: No further relevant information available.. Hazardous decomposition products: No dangerous decomposition products known. * 11 Toxicological information. Acute toxicity:. Primary irritant effect:. on the skin: No irritant effect.. on the eye: No irritating effect.. Sensitization: No sensitizing effects known.. Additional toxicological information: The product is not subject to classification according to internally approved calculation methods for preparations: When used and handled according to specifications, the product does not have any harmful effects according to our experience and the information provided to us.. Carcinogenic categories. IARC (International Agency for Research on Cancer) silicon dioxide, chemically prepared: 3 (Contd. on page 5) US-G 11/14

12 Page 5/7 CLP Declaration Printing date 08/06/2014 Reviewed on 07/05/2014. NTP (National Toxicology Program). OSHA-Ca (Occupational Safety & Health Administration) (Contd. of page 4) 12 Ecological information. Aquatic toxicity: No further relevant information available.. Persistence and degradability No further relevant information available.. Bioaccumulative potential No further relevant information available.. Additional ecological information:. General notes: Do not allow undiluted product or large quantities of it to reach ground water, water course or sewage system. Water hazard class 1 (Self-assessment): slightly hazardous for water 13 Disposal considerations. Waste treatment methods. Recommendation: Smaller quantities can be disposed of with household waste.. Uncleaned packagings:. Recommendation: Disposal must be made according to official regulations. Packagings that cannot be cleansed are to be disposed of in the same manner as the product. 14 Transport information. UN-Number. DOT, ADR, ADN, IMDG, IATA Void. UN proper shipping name. DOT, ADR, ADN, IMDG, IATA Void. Transport hazard class(es). DOT, ADR, ADN, IMDG, IATA. Class Void. Packing group. DOT, ADR, IMDG, IATA Void. Environmental hazards:. Marine pollutant: No. Special precautions for user Not applicable.. Transport in bulk according to Annex II of MARPOL73/78 and the IBC Code Not applicable.. Transport/Additional information:. IMDG. Remarks: Under certain conditions substances in Class 3 (flammable liquids) can be classified in packinggroup III. See IMDG, Part 2, Chapter 2.3, Paragraph UN "Model Regulation": - (Contd. on page 6) US-G 12/14

13 Page 6/7 CLP Declaration Printing date 08/06/2014 Reviewed on 07/05/2014 * 15 Regulatory information (Contd. of page 5). SARA Section 355 (extremely hazardous substances). SARA Section 313 (specific toxic chemical listings). TSCA (Toxic Substances Control Act) polydimethylsiloxane silicon dioxide, chemically prepared triacetoxyethylsilane iron oxide. Prop 65 - Chemicals known to cause cancer. Cancerogenity categories. EPA (Environmental Protection Agency). TLV (Threshold Limit Value established by ACGIH). MAK (German Maximum Workplace Concentration). NIOSH-Ca (National Institute for Occupational Safety and Health). GHS label elements The product is classified and labeled according to the Globally Harmonized System (GHS).. Hazard pictograms GHS05 GHS07. Signal word Danger. Hazard-determining components of labeling: triacetoxyethylsilane. Hazard statements H302 Harmful if swallowed. H315 Causes skin irritation. H318 Causes serious eye damage.. Precautionary statements P270 Do not eat, drink or smoke when using this product. P280 Wear protective gloves/protective clothing/eye protection/face protection. P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P321 Specific treatment (see on this label). P362 P332+P313 Take off contaminated clothing. If skin irritation occurs: Get medical advice/attention. (Contd. on page 7) US-G 13/14

14 Page 7/7 CLP Declaration Printing date 08/06/2014 Reviewed on 07/05/2014 (Contd. of page 6) 16 Other information This information is based on our present knowledge. However, this shall not constitute a guarantee for any specific product features and shall not establish a legally valid contractual relationship.. Department issuing MSDS: QESH Department. Contact: Reach coördinator. Date of preparation / last revision 08/06/2014 / 4. Abbreviations and acronyms: Acute Tox. 4: Acute toxicity, Hazard Category 4 Skin Irrit. 2: Skin corrosion/irritation, Hazard Category 2 Eye Dam. 1: Serious eye damage/eye irritation, Hazard Category 1. * Data compared to the previous version altered. US-G 14/14