Material Safety Data Sheet

Transcription

1 Page: 1/6 Material Safety Data Sheet 1. Chemical Product and Company Identification DESCRIPTION: PRODUCT TYPE: APPLICATION: PVP GLUE STICK SYNTHETIC POLYMERSYNTHETIC POLYMER MIXTURE FOR PRODUCT CODES SEE SECTION 16 Manufacturer/Supplier Information MSDS Prepared by: 2. Composition, Information on Ingredients Chemical Name Percentage CAS# Polyvinyl Pyrrolidone 20.0~ Sodium Stearate 6.0~ Glycerin 8.0~ Dimethyl silicone oil 0.5~ Water 53.5~ Hazards Identification 3.1 Emergency Overview Appearance White solid Odor Slight bland CAUTION! Not an immediate health hazard Not a significant fire hazard

2 Page: 2/6 HMIS Rating HEALTH = 1 (slight) FLAMMABILITY = 0 (minimal) REACTIVITY = 0 (minimal) 3.2 Potential Health Effects Immediate Hazards INGESTION: INHALATION: SKIN: EYES: Delayed Hazards None of the components present in this product at concentrations equal to or greater than.1% has been listed by NTP, classified by IARC, nor regulated by OSHA as a carcinogen. 4. First Aid Measures INGESTION: INHALATION: SKIN: EYES: If swallowed, immediately give 2 glass of water. Never give anything by mouth to an unconscious person. Contract a physician. Although this product is not known to cause respiratory problems, if breathing is difficult, remove to fresh air and provide oxygen. Get medical attention if cough or other symptoms develop. Wash affected area with soap and water. Get medical attention if irritation develops or persists. In case of contract, immediately flush eyes with plenty of water for at least 15 minutes. Get medical attention if irritation develops or persists. 5. Fire Fighting Measures Autoignition Temperature Not available Upper/Lower Flammable Limits Up/Lower Explosive Limits, %by Vol Flash Point Will not burn unless water has evaporated. Dried material may burn. In case of fire, water should be used to keep fire-exposed containers cool.

3 Page: 3/6 6. Accidental Release Measures Sweep (scoop) up and remove to a chemical disposal area. Prevent entry into natural bodies of water. 7. Handling and Storage 7.1 Handling Handle in accordance with good industrial hygiene and safety practices. INHALATION: Avoid prolonged or repeated breathing of dust or vapor. SKIN: Avoid prolonged or repeated contact with skin and clothing. EYES: Avoid prolonged or repeated contact with eyes. 7.2 Storage Keep from freezing. Store in a cool, dry place. Keep containers tightly closed. 8. Exposure Controls/Personal Protection 8.1 Exposure Controls No special control measure necessary under normal conditions of use. 8.2 Personal Protection No special protection necessary under normal conditions of use. 8.3 Exposure Guidelines None established

4 Page: 4/6 9. Physical and Chemical Properties Percent Volatiles C Specific Gravity 1.15g/cm 3 Appearance White solid Autoignition Temperature Not available Boiling Point 100 deg C Vapor Density (Air=1) < 1 Vapor Pressure, mm 20 C Evaporation Rate (Butyl Acetate=1) < 1 Upper/Lower Flammable Limits Up/Lower Explosive Limits, % by Vol Flash Point Freezing Point -16 deg C Odor Slight bland Odor Threshold, ppm Solubility in Water Dispersible 10. Stability and Reactivity Normally stable Incompatibilities: Not known to border Decomposition products may include: Oxides of carbon Hazardous polymerization: Will not occur. Other Hazards: None known to company.

5 Page: 5/6 11. Toxicological Information See Section 3 Hazards Identification information. 12. Ecological Information Not determined. 13. Disposal Considerations Dispose of according to local, state/provincial, and federal requirements. 14. Transport Information 14.1 U.S. Department of Transportation (DOT) The data provided in this section is for information only and may not be specific to your package size. You will need to apply the appropriate regulations to properly classify your shipment for transportation. Non-Regulated Canadian Transportation of Dangerous Goods (TDG) Non-Regulated. 15. Regulatory Information- classification and identification (Selected Regulations) Not subject of the identification regulations. Hazard trigger: Special declaration: National regulations/information: WGK: 1, slightly water-endangering product. (German VwVwS of May 17, 1999) Classification in conformity with the calculation method Storage class VCI: 11

6 Page: 6/6 16. Other Information PVP glue stick conforms to ASTM D4236 and EN71. User's Responsibility The OSHA Hazard Communication Standard 29CFR and the Workplace Hazardous Materials Information System (WHMIS) require that the information contained on these sheets be made available to your workers. Educate and train your workers regarding OSHA and WHMIS precautions. Instruct your workers to handle this product properly. Consult with appropriate experts to guard against hazards associated with use of this product and its ingredients. Disclaimer SELLER MAKES NO WARRANTY, EXPRESS OR IMPLIED, and CONCERNING THE PRODUCT OR THE MERCHANTABILITY OR FITNESS THEREOF FOR ANY PURPOSE, except that the product shall conform to contracted specifications, and that the product does not infringe any valid United States or Canadian patent. No claim of any kind shall be greater in amount than the purchase price of the quantity of product in respect of which damages are claimed. In no event shall Seller be liable for incidental or consequential damages, whether Buyer's claim is based on contract, breach of warranty, negligence or otherwise. CUR ISSUE 01-JAN-2017 PREVIOUS ISSUE: 01-JULY-2014