Diving Solutions (Asia) Catalog / Name: RG-1100F 1st Stage

Transcription

1 Name: RG-1100F 1st Stage Ref: Manufacturer: Aquatec Fitting: Yoke,Stock:0,Fitting: Yoke,Fitting: Yoke,Price: US$ Fitting: DIN,Stock:0,Fitting: DIN,Fitting: DIN,Price: US$ The Aquatec RG-1100F is a piston based 1st stage, featuring the Extended Thermal Insulating System that gives this 1st stage a 30% improvement of freezing over previous models. It has an ultra fast breathing response and great sensitivity with extra-high airflow. The 1st stage features two high-pressure ports, and five low-pressure ports; with an intermediate pressure of 9.5~10.2 BAR. CE Approved and manufactured from chrome plated brass with stainless steel springs for long life. Price: US$ Price (inc tax): US$ /403

2 Name: RG-2100F 1st Stage Ref: Manufacturer: Aquatec Fitting: Yoke,Stock:0,Fitting: Yoke,Fitting: Yoke,Price: US$ Fitting: DIN,Stock:0,Fitting: DIN,Fitting: DIN,Price: US$ The Aquatec RG-2100F is a diaphragm design 1st stage, offering a consistent airflow independent of depth/tank pressure. This is a compact 1st stage featuring two high-pressure ports, and four lowpressure ports; with an intermediate pressure of 9.5~10.2 BAR. CE Approved and manufactured from chrome plated brass with stainless steel springs for long life. Price: US$ Price (inc tax): US$ /403

3 Name: RG-3100F 1st Stage Ref: Manufacturer: Aquatec Fitting: Yoke,Stock:0,Fitting: Yoke,Fitting: Yoke,Price: US$ Fitting: DIN,Stock:0,Fitting: DIN,Fitting: DIN,Price: US$ The Aquatec RG-3100F is a piston based 1st stage, with a time-tested design for demanding conditions. This is the 1st stage of choice for a rental regulator, it comes factory cleaned and ready for up to 40% Nitrox. A simple design, easy to maintain and great value. The 1st stage features one high-pressure port, and four low-pressure ports; with an intermediate pressure of 9.5~10.2 BAR. CE Approved and manufactured from chrome plated brass with stainless steel springs for long life. Price: US$ Price (inc tax): US$ /403

4 Name: RG-4100F 1st Stage Ref: Manufacturer: Aquatec Fitting: Yoke,Stock:0,Fitting: Yoke,Fitting: Yoke,Price: US$ Fitting: DIN,Stock:0,Fitting: DIN,Fitting: DIN,Price: US$ The Aquatec RG-4100F is a balanced diaphragm design 1st stage, offering a consistent airflow independent of depth/tank pressure. This is a compact 1st stage featuring two high-pressure ports, and four low-pressure ports; with an intermediate pressure of 9.5~10.2 BAR. Designed for cold water use, and manufactured from chrome plated brass with stainless steel springs for long life. Price: US$ Price (inc tax): US$ /403

5 Name: Scuba Air 3 2nd Stage Ref: Manufacturer: Aquatec This is an integrated secondary 2nd Stage (octopus), and BCD power inflator. It allows you to combine the two items, and reduce the hoses/2nd stage from your regulator setup; to help improve streamlining. It also features a built-in underwater/surface signaling device, similar to the Sub Alert Duo. It includes a rubber inflator hose, to be fitted into your 1st stage low-pressure port (replacing your existing inflator hose). The Air 3 is compatible with most BCD, such as Aqua-Lung, Dacor, Oceanic, SeaQuest, TUSA, US Diver, XS Scuba and others. Price: US$ Price (inc tax): US$ /403

6 Name: RG-2100S 2nd Stage Ref: Manufacturer: Aquatec Color: Yellow,Stock:1,Color: Yellow,Color: Yellow,Price: US$ Color: Blue,Stock:0,Color: Blue,Color: Blue,Price: US$ Color: Green,Stock:1,Color: Green,Color: Green,Price: US$ Color: Orange,Stock:0,Color: Orange,Color: Orange,Price: US$ Color: Purple,Stock:0,Color: Purple,Color: Purple,Price: US$ Color: Red,Stock:0,Color: Red,Color: Red,Price: US$ The RG-2100S is a non-adjustable 2nd stage, suitable for either a primary or secondary 2nd stage. The front cover of the 2nd stage is user changeable and available in 6 different colors (Green, Blue, Purple, Orange, Red, Yellow). The RG-2100S comes supplied with a 75cm (29 inches) rubber low-pressure hose with a 3/8"x24 thread; suitable for most modern 1st stages. Price: US$ Price (inc tax): US$ /403

7 Name: RG-3100S 2nd Stage Ref: Manufacturer: Aquatec Color: Yellow,Stock:0,Color: Yellow,Color: Yellow,Price: US$ Color: Blue,Stock:0,Color: Blue,Color: Blue,Price: US$ Color: Green,Stock:0,Color: Green,Color: Green,Price: US$ Color: Orange,Stock:0,Color: Orange,Color: Orange,Price: US$ Color: Purple,Stock:0,Color: Purple,Color: Purple,Price: US$ Color: Red,Stock:0,Color: Red,Color: Red,Price: US$ The RG-3100S is an adjustable 2nd stage, the pneumatically balanced design gives consistent gas flow at all times. Featuring a Venturi assist to produce a smooth inhalation, and a dive/pre dive lever to help avoid free flows on the surface. The adjustable design allows the diver to fine tune the breathing pressure of the second stage while in the water, to suit conditions. The front cover of the 2nd stage is user changeable and available in 6 different colors (Green, Blue, Purple, Orange, Red, Yellow). The RG-3100S comes supplied with a 75cm (29 inches) rubber low-pressure hose with a 3/8"x24 thread; suitable for most modern 1st stages. Price: US$ Price (inc tax): US$ /403

8 Name: RG-6000 Octopus (Left hand) Ref: Manufacturer: Aquatec Color: Yellow,Stock:0,Color: Yellow,Color: Yellow,Price: US$ Color: Black,Stock:0,Color: Black,Color: Black,Price: US$ The RG-6000 is a high performance secondary 2nd stage (Octopus), featuring a compact/flat design to improve diver streamlining. This second stage is designed to fit onto Aquatec PI-208 & PI-230 inflators, it provides excellent breathing at all recreational diving depths. Price: US$ Price (inc tax): US$ /403

9 Name: RG-6000 Octopus (Right hand) Ref: Manufacturer: Aquatec Color: Yellow,Stock:0,Color: Yellow,Color: Yellow,Price: US$ Color: Black,Stock:0,Color: Black,Color: Black,Price: US$ The RG-6000 is a high performance secondary 2nd stage (Octopus), featuring a compact/flat design to improve diver streamlining. This second stage is designed to fit onto Aquatec PI-208 & PI-230 inflators, it provides excellent breathing at all recreational diving depths. Price: US$ Price (inc tax): US$ /403

10 Name: Aquatec Jacket BCD-Adult Ref: Manufacturer: Aquatec Size: S,Stock:1,Size: S,Size: S,Price: US$ Size: M,Stock:1,Size: M,Size: M,Price: US$ Size: L,Stock:1,Size: L,Size: L,Price: US$ Size: XL,Stock:1,Size: XL,Size: XL,Price: US$ Size: XS,Stock:1,Size: XS,Size: XS,Price: US$ Constructed from 1000 denier Cordura and with 1680 denier nylon pockets. This is a rugged little jacket BCD, ideal for beginners to dive shop rental. Includes power inflator and hose, 3x OPV`s and hose clip. Price: US$ Price (inc tax): US$ /403

11 Name: Aquatec Performance BCD-Plastic Ref: Manufacturer: Aquatec Color: Black,Stock:0,Color: Black,Color: Black,Price: US$ Color: Red,Stock:0,Color: Red,Color: Red,Price: US$ Color: Black/Red,Stock:0,Color: Black/Red,Color: Black/Red,Price: US$ A 24lb (kg) donut style bladder made from 1680D Cordura fitted to a plastic back plate. The bladder is fitted with a zipper for easy access to the 0.4mm Polyurethane inner bladder, for cleaning or maintenance. The BCD includes a power inflator with an integrated signaling device, crotch strap and 2 side pouches (can be used as weight pouches, max 2Kg per pocket). The bladder is fitted with 2 dump valves (OPV`s), with a third release by pulling the power inflator. The BCD is size adjustable to suit anyone from children to adults; featuring a compact light weight makes it ideal for easy traveling. Price: US$ Price (inc tax): US$ /403

12 Name: Aquatec Performance BCD-Alu Ref: Manufacturer: Aquatec Color: Red,Stock:1,Color: Red,Color: Red,Price: US$ Color: Black/Red,Stock:0,Color: Black/Red,Color: Black/Red,Price: US$ Color: Black,Stock:1,Color: Black,Color: Black,Price: US$ A 24lb (kg) donut style bladder made from 1680D Cordura fitted to an aluminium back plate. The bladder is fitted with a zipper for easy access to the 0.4mm Polyurethane inner bladder, for cleaning or maintenance. The BCD includes a power inflator with an integrated signaling device, crotch strap and 2 side pouches (can be used as weight pouches, max 2Kg per pocket). The bladder is fitted with 2 dump valves (OPV`s), with a third release by pulling the power inflator. The BCD is size adjustable to suit anyone from children to adults; featuring a compact light weight makes it ideal for easy traveling. Price: US$ Price (inc tax): US$ /403

13 Name: Aquatec Jacket BCD-Child Ref: Manufacturer: Aquatec Constructed from 1000 denier Cordura and with 1680 denier nylon pockets. This is a rugged little jacket BCD, ideal for beginners to dive shop rental. Includes power inflator and hose, 3x OPV`s and hose clip. Price: US$ Price (inc tax): US$ /403

14 Name: XDeep Ghost Standard Ref: Manufacturer: XDeep Size: Small,Stock:1,Size: Small,Size: Small,Price: US$ Size: Large,Stock:1,Size: Large,Size: Large,Price: US$ The NX Ghost is a complete back mount BCD weighing only 2.3Kg (5 lbs), making it perfect for the traveling diver. This durable BCD used a revolutionary design and cutting edge materials to make it an unrivaled recreational BCD. The Ghost is designed to closely hug the diver's body and tank, to give the best streamlining as possible; to help reduce effort while diving. The bladder provides 17Kg (37 lbs) of lift and is specially shaped to maximize buoyancy and comfort on the surface. The modular weight pockets of the Ghost allow you to carry up to 16Kg (35lbs) of lead securely. The bladder is a single shell construction made from Cordura 1100 dtex materials and features a KType inflator. There is a single tank adaptor included for added stability. The Ghosts is available in two sizes, depending on divers height: Less than 175cm = Small 175cm or taller = Large Price: US$ Price (inc tax): US$ /403

15 Name: XDeep Zen Standard Ref: Manufacturer: XDeep Size: Small,Stock:1,Size: Small,Size: Small,Price: US$ 1, Size: Large,Stock:1,Size: Large,Size: Large,Price: US$ 1, The Zen BCD is designed to maximize your comfort in the water and make you feel as one with the aquatic world. The stable, comfortable and ergonomic design make it truly ZEN. The ZEN design ensures that you are held comfortably and confidently on the surface during entries and exits. The ZEN bladder is deliberately designed narrower than traditional bladders, this helps to enhance buoyancy control while reducing entanglement risks an improving streamlining. The ZEN features an ergonomically designed aluminum back plate which also makes it easier to wear and remove as well as a single tank adaptor, to give the best comfort and stability. The ZEN is available in two sizes, depending on the divers height: Less than 175cm = Small 175cm or taller = Large Price: US$ 1, Price (inc tax): US$ 1, /403

16 Name: XDeep Project Standard Ref: Manufacturer: XDeep Techincal diving puts high demands on your equipment, the Project BCD meets these demands! The design of the Project will help to improve your stability in the water, with added ergonomics and safety. The wing design on the project gives 23Kg (52 lbs) lift while still being narrower and more streamlined than other wings. The tapered shape of the wings, gives better stability on the surface by keeping most of the inflated region below the water surface. The shape of the backplate is wider than usual which adds comfort by spreading the load across your body, and also makes it easier to be worn/removed. Price: US$ Price (inc tax): US$ /403

17 Name: XDeep ZEOS 28 Comfort Ref: Manufacturer: XDeep The ZEOS BCD is the result of years of development, to create a better single tank BCD. Its design helps to achieve a flat trim, by carefully matching the center of gravity of the tank with the center of buoyancy. Having a good trim position helps improve streamlining and performance underwater. The wing design gives improved comfort and stability on the surface; by ensuring most of the inflated bladder is kept below the surface of the water. With the added 3D mesh padding, the ZEOS is a joy to wear and contours itself to your body. The 3D mesh does not change its buoyancy characteristics during the dive; unlike other systems. This ZEOS coms with a 13Kg (28 lbs) lift bladder; and the option of modular weight pouches on the harness. Price: US$ 1, Price (inc tax): US$ 1, /403

18 Name: XDeep ZEOS 28 Standard Ref: Manufacturer: XDeep The ZEOS BCD is the result of years of development, to create a better single tank BCD. Its design helps to achieve a flat trim, by carefully matching the center of gravity of the tank with the center of buoyancy. Having a good trim position helps improve streamlining and performance underwater. The wing design gives improved comfort and stability on the surface; by ensuring most of the inflated bladder is kept below the surface of the water. This ZEOS coms with a 13Kg (28 lbs) lift bladder; and the option of modular weight pouches on the harness. Price: US$ Price (inc tax): US$ /403

19 Name: Aquatec Twin Tank BCD Ref: Manufacturer: Aquatec The BC-72 Twin Tank BCD is a technical diving harness with the wing. It features a horseshoeshaped dual cell wing, with a total of 60kg (132 lbs) of lift. The wing shape allows the tanks to fit closer to your body, while bungee cords help improve the wing streamlining when deflated. The outer cover of the wind is made from 1000 Denier Cordura, and the harness features quick release shoulder straps for easy fitting & removal. The backplate is made from Stainless Steel, and the harness is fitted with 8 d-rings and stainless steel buckle. Price: US$ Price (inc tax): US$ /403

20 Name: Horse Collar BCD Ref: Manufacturer: Aquatec The Navy Horse Collar BCD is constructed from a double layer of material, the inner is 0.4mm polyurethane while the inner is 1000 Denier Cordura. The bladder is a single cell, with a power inflator; and offers excellent front stability, and has 1 OPV on each side. The bladder provides 18kg (40lbs) of lift when fully inflated, and has a front pocket for accessories. The horse collar BCD offers the old fashioned simple diving experience and can be used for both scuba diving or snorkeling. Price: US$ Price (inc tax): US$ /403

21 Name: Over Pressure Valve (OPV) Complete Ref: Manufacturer: Aropec The primary purpose of an overpressure release valve is to prevent accidental over inflation of your BCD or drysuit by automatically releasing extra air contained in the bladder once it reaches a critical point. This overpressure release valve is sold as a complete set allowing you to fit it yourself onto your BCD or dry suit. It also comes with a 12 cm long (4.75 inches) string attached to it, enabling you to trigger the dump valve yourself should you need to quickly release air from your BCD or dry suit. This overpressure release valve is of a simple design making it easy for you to assemble and fit onto your equipment. It includes the internal mushroom bolt, a double layer seal, the outer nut, a stainless steel spring, and the overpressure release valve with a string attached to it. This valve will fit in a 3cm (1.18 inches) diameter hole and has an external diameter of 5cm (2inches). Price: US$ 8.50 Price (inc tax): US$ /403

22 Name: Power Inflator (K Type) Complete Ref: Manufacturer: Other This is the complete power inflator set perfect for replacing a damaged or defective inflator, and for divers looking at building their own BCDs. The power inflator is designed with a simple and easy to use K-style structure, which is composed with a power inflator button for a quick and easy BCD inflation, as well as with a mouthpiece for oral inflation and extra safety. The deflator button is located at the top of the K design and is easily used by pressing and holding it to release air from your bladder. This inflator also comes with a 38 cm long (15 inches) and 2.5 cm diameter (1 inch) corrugate hose with a fixed elbow, therefore enabling you to attach the inflator onto your BCD quickly and easily. The fixed elbow is not designed with a dump valve and therefore ensures that the whole system stays simple and easy to service yourself. Price: US$ Price (inc tax): US$ /403

23 Name: Corrugated Inflator Hose Ref: Manufacturer: Aropec Length: 41cm,Stock:0,Length: 41cm,Length: 41cm,Price: US$ Length: 43cm,Stock:0,Length: 43cm,Length: 43cm,Price: US$ Length: 61cm,Stock:0,Length: 61cm,Length: 61cm,Price: US$ Length: 38cm,Stock:0,Length: 38cm,Length: 38cm,Price: US$ Length: 33cm,Stock:0,Length: 33cm,Length: 33cm,Price: US$ This corrugated rubber inflator hose is 25mm (1 inch) diameter. It can be used as a replacement for a split hose, or to increase the length of a short corrugated hose. Price: US$ Price (inc tax): US$ /403

24 Name: Inflator Hose Elbow Ref: Manufacturer: Aropec This elbow is to connect your BCD with the power inflator hose. It will fit our OPV Outer part and includes a rubber seal. It can be used to replace an existing fitting or to change a dump valve type to a non-dump valve. Price: US$ Price (inc tax): US$ /403

25 Name: Inflator/OPV Fitting Ref: Manufacturer: Aropec This item is the internal 'Mushroom nut' and double layer seal. Suitable for standard 50mm (2 inches) OPV/Power inflators. The part is designed to be used with our OPV outer and is a compression seal, no glue is required for use. Price: US$ Price (inc tax): US$ /403

26 Name: Power Inflator Head Ref: Manufacturer: Aropec Stock: -4 This BCD power inflator is the perfect replacement for a defective power inflator. It is of a simple and effective K-style design, meaning both of your inflation options are on the same side. As such, this power inflator gives you the option to power inflate your BCD by simply pressing the grey button situated on the side of the device for a quick and easy inflation, and is also designed with a practical mouthpiece placed next to it for your safety and for a more controlled inflation. The deflator button is located on the top of the power inflator and is used by simply pressing the button to release the air contained in your BCD. This power inflator is made of a strong black colored plastic material, ensuring an aesthetic look and resistance to saltwater environments. This power inflator will fit on a 25 mm (1 inch) corrugate hose diameter found on most BCD types including technical BCDs. Price: US$ Price (inc tax): US$ /403

27 Name: Aluminium Backplate Ref: Manufacturer: Diving Solutions (Asia) LLP A backplate is a key component of a buoyancy device. This aluminium backplate is perfect for those wanting to build their own buoyancy device or wanting to replace their old back plate. It has a universal fitting, meaning it can be adapted for both single and twin tanks BCDs, and measures 40cm in height (15.74 inch), 30 cm in width (11.8 inch) and has a 3mm depth (0.11 inch). This universal backplate is made of aluminum, which ensures maximum resistance against salt-water environments, and durability. Moreover, aluminum makes this backplate very light-weight, therefore making it the perfect component for building your BCD with. It is constructed with multiples holes including the harness slots and crotch straps, allowing it to be fitted to most bladders and twin tanks, therefore making this backplate very polyvalent. It comes in anodized black for a slick appearance and the best fit to any bladder. Price: US$ Price (inc tax): US$ /403

28 Name: Harness Kit Ref: Manufacturer: Diving Solutions (Asia) LLP Stock: -3 This DIY Harness kit, can be used to replace an existing harness on a backplate, etc. Or can be used with our backplate to make a complete system, the kits contains 320cm of 2 inch (5cm) nylon webbing, with centre grommet for fitting backplate bolt/sex bolt to firmly locate the webbing. Included are also 4 stainless steel D-rings & sliders, 1 set for each shoulder, and 1 set for each hip. The plastic sliders are used to secure the webbing in position against the backplate at the waist slot. Finally the bungee loop, is used for retaining the BCD inflator hose. Price: US$ Price (inc tax): US$ /403

29 Name: Crotch Strap Kit Ref: Manufacturer: Diving Solutions (Asia) LLP Adding a crotch strap to a BCD can add stability for the BCD on your body underwater. While improving the BCD position on the surface and keeping you out of the water. This kit includes, 2 inch (5cm) polyester webbing (for added comfort) for added comfort, includes 1 stainless steel slider, 1 stainless steel D-ring and 1 plastic slider. Price: US$ Price (inc tax): US$ /403

30 Name: Single Tank Adapter Ref: Manufacturer: Diving Solutions (Asia) LLP Using a Single Tank Adapter (STA) with a metal backplate adds stability to the tank, and improves buoyancy control (less roll). These single tank adaptors are specially designed by us at Diving Solutions and made from anodized Aluminium, to be the lightweight solution rather than the more common stainless steel version. They have two slots for cam bands, for extra support and security of the tank and are a perfect combination to our own Backplate. Price: US$ Price (inc tax): US$ /403

31 Name: Reef Fish ID - Tropical Pacific Ref: Manufacturer: Other This is the 2nd edition of this great fish ID book, its the standard field guide for naturalists, divers, and aquarists for the tropical Pacific region. Featuring an easy to use system where fish are grouped by species in 20 groups. There are over 2,500 quality photographs across 2,000 species of reef fish; with information as scientific name, size and visual features for easy identification. Price: US$ Price (inc tax): US$ /403

32 Name: Reef Creature ID - Tropical Pacific Ref: Manufacturer: Other This guide provides a reference of over 500 pages, detailing 1,600 reef animals using 2,000 highquality photographs. Detailed descriptions are provided, making a perfect for diving professionals, photographers or underwater naturalists. Price: US$ Price (inc tax): US$ /403

33 Name: Nudibranch & Sea Slug ID Ref: Manufacturer: Other Written by three Nudibranch experts this is a comprehensive guide to Nudibranch and Sea Slugs in the Indo-Pacific region. The book features 408 pages of details and over 2,200 high-quality photographs to aid identification. Price: US$ Price (inc tax): US$ /403

34 Name: 3mm Low Cut Booties Ref: Manufacturer: Aropec Size: Size 5,Stock:5,Size: Size 5,Size: Size 5,Price: US$ Size: Size 6,Stock:1,Size: Size 6,Size: Size 6,Price: US$ Size: Size 7,Stock:0,Size: Size 7,Size: Size 7,Price: US$ Size: Size 8,Stock:0,Size: Size 8,Size: Size 8,Price: US$ Size: Size 9,Stock:3,Size: Size 9,Size: Size 9,Price: US$ Size: Size 10,Stock:8,Size: Size 10,Size: Size 10,Price: US$ Size: Size 11,Stock:8,Size: Size 11,Size: Size 11,Price: US$ Size: Size 12,Stock:6,Size: Size 12,Size: Size 12,Price: US$ Size: Size 4,Stock:6,Size: Size 4,Size: Size 4,Price: US$ This pair of Aropec low cut booties is a great piece of equipment for divers owning open-heel fins. These boots are designed to protect divers feet and will keep them warm and comfortable during the dive and on the boat. This pair of boots is made of 3 mm thick neoprene, therefore, ensuring best suitability in tropical water environments. They are sealed with glued and blind stitch seam, which helps to minimize the water flow. The soles are designed to be anti-slip and are made with vulcanized rubber, which ensures great durability and resistance to erosion. This pair of low cut booties is the perfect versatile product, which will enable you to dive and walk on uneven, rocky ground without hurting yourself. Price: US$ Price (inc tax): US$ /403

35 Name: Aqua Socks Ref: Manufacturer: Diving Solutions (Asia) LLP Size: 38~40,Stock:118,Size: 38~40,Size: 38~40,Price: US$ 7.93 Size: 42~44,Stock:126,Size: 42~44,Size: 42~44,Price: US$ 7.93 Size: 45~47,Stock:100,Size: 45~47,Size: 45~47,Price: US$ 7.93 Size: 36~38,Stock:43,Size: 36~38,Size: 36~38,Price: US$ 7.93 Aqua socks, ideal for beach wear, surfing, diving etc. Quick-drying polyester & spandex. Unisex fitting. Wear inside full foot fins to avoid blisters... 36~38 = Size S 38~40 = Size M 42~44 = Size L 45~47 = Size XL Price: US$ 7.93 Price (inc tax): US$ /403

36 Name: 5mm Booties (Hard Sole) Ref: Manufacturer: Aropec Size: Size 5,Stock:2,Size: Size 5,Size: Size 5,Price: US$ Size: Size 6,Stock:4,Size: Size 6,Size: Size 6,Price: US$ Size: Size 7,Stock:3,Size: Size 7,Size: Size 7,Price: US$ Size: Size 8,Stock:2,Size: Size 8,Size: Size 8,Price: US$ Size: Size 9,Stock:8,Size: Size 9,Size: Size 9,Price: US$ Size: Size 10,Stock:4,Size: Size 10,Size: Size 10,Price: US$ Size: Size 11,Stock:2,Size: Size 11,Size: Size 11,Price: US$ Size: Size 12,Stock:1,Size: Size 12,Size: Size 12,Price: US$ Size: Size 4,Stock:2,Size: Size 4,Size: Size 4,Price: US$ This pair of high-cut booties is a great piece of equipment for divers owning open-heel fins. These boots are designed to protect divers feet and keep them warm and comfortable during the dive or on the boat. This pair of booties is lined with 5 mm titanium ensuring perfect isolation from the cold and great protection for your feet. They are double glued and blind-stitched to keep water flow to a minimum and ensure a comfortable fit. They are designed with heels and toe caps to maximize the protection of your feet and ensure the product durability. The soles are hard and non-marking which makes this pair of high-cut booties perfect for walking on hard ground and boats without running the risks of leaving sole marks. They are Aropec built which ensures you a high-quality product and are designed with a durable YKK zip. They come in different sizes to fit all types of feet. Price: US$ Price (inc tax): US$ /403

37 Name: 3mm Low Cut Booties (Child) Ref: Manufacturer: Aropec Size: Size 2,Stock:4,Size: Size 2,Size: Size 2,Price: US$ Size: Size 3,Stock:4,Size: Size 3,Size: Size 3,Price: US$ This pair of Aropec low cut booties is a great piece of equipment for divers owning open-heel fins. These boots are designed to protect divers feet and will keep them warm and comfortable during the dive and on the boat. This pair of boots is made of 3 mm thick neoprene, therefore, ensuring best suitability in tropical water environments. They are sealed with glued and blind stitch seam, which helps to minimize the water flow. The soles are designed to be anti-slip and are made with vulcanized rubber, which ensures great durability and resistance to erosion. This pair of low cut booties is the perfect versatile product, which will enable you to dive and walk on uneven, rocky ground without hurting yourself. Price: US$ Price (inc tax): US$ /403

38 Name: Lanyard Ref: Manufacturer: Aropec Color: Orange,Stock:18,Color: Orange,Color: Orange,Price: US$ 4.53 Color: Black,Stock:20,Color: Black,Color: Black,Price: US$ 4.53 Color: Yellow,Stock:15,Color: Yellow,Color: Yellow,Price: US$ 4.53 Color: Green,Stock:19,Color: Green,Color: Green,Price: US$ 4.53 Color: Blue,Stock:13,Color: Blue,Color: Blue,Price: US$ 4.53 Apart from securing a small camera or a torch to you wrist; how about using one of these lanyards for ensuring you dont loose your dive computer if your strap breaks? Includes a spring stopper (featuring stainless steel spring). Price: US$ 4.53 Price (inc tax): US$ /403

39 Name: Quick Release Spiral Lanyard Ref: Manufacturer: Aropec This quick release spiral lanyard is the perfect addition to the dive equipment of those carrying cameras, torches or other accessories underwater. This piece of dive equipment will enable you to carry accessories during dives without any risk of losing them. This quick release lanyard is designed with two stainless steel karabiners on either extremity so you can easily attach it onto your BCD and secure your accessory at the same time. In the middle, the coil lanyard is constructed with a quick release clip, which enables you to secure your device close to you when not in use and quickly release it and extend the coil when you want to use it. This lanyard is a great way to avoid loosing your equipment and prevent entanglement during a dive. It enables you to keep a streamlined position without having to worry about damaging your equipment and the marine environment. Price: US$ Price (inc tax): US$ /403

40 Name: Quick Release Strap Ref: Manufacturer: Diving Solutions (Asia) LLP This quick release strap is the perfect addition to the dive equipment of those carrying cameras, torches or any heavy accessories underwater. This piece of dive equipment will enable you to carry accessories during dives without any risk of losing them. This quick release strap is designed with two stainless steel snap bolts on either extremity, so you can easily attach it onto your BCD and secure your accessory at the same time. In the middle, the strap is constructed with a quick release clip, which enables you to secure your device close to you when not in use and quickly release it when needed. This strap is a great way to avoid loosing your equipment and prevent entanglement during a dive. It is 12 cm (5 inches) long and enables you to keep a streamlined position without having to worry about damaging your equipment and the marine environment. Price: US$ Price (inc tax): US$ /403

41 Name: Silicon Grease Ref: Manufacturer: IST Sports Weight: 60g,Stock:0,Weight: 60g,Weight: 60g,Price: US$ Weight: 5g,Stock:18,Weight: 5g,Weight: 5g,Price: US$ 6.80 Silicon grease is an absolutely essential product for divers who want to take care of their dive gear. Silicon grease is used for lubricating and improving sealing of joints and o-rings for underwater camera casing, regulator o-rings, torches o-rings and so on. This silicon pot bears the IST brand, therefore, giving you a guaranteed quality for use on your dive equipment. Lubricating equipment only requires a very small portion of silicon grease to be used at a time, therefore this choose the size you need from our range 60g, 15g, 5g (1.06oz, 0.53oz, 0.18oz) pot ensures that you will have a longlasting supply of high-quality silicon grease for the servicing of your gear. It is always important, however, that you refer to your equipment s manufacturer information as to the application of silicon grease. This silicon grease pot is also useful for the maintenance and lubrication of any other equipment around the house making it a very useful multipurpose product to have! NOT SUITABLE FOR OXYGEN (O2) APPLICATIONS Price: US$ 6.80 Price (inc tax): US$ /403

42 Name: Quick Release Spiral Lanyard - Heavy Duty Ref: Manufacturer: Aropec Stock: -1 This heavy-duty quick release spiral lanyard is the perfect addition to the dive equipment of those carrying cameras, torches and any heavy accessories underwater. This piece of dive equipment will enable you to carry accessories during dives without any risk of losing them. This heavy-duty quick release lanyard is designed with a coiled stainless steel braided wire in the middle and therefore ensures extreme strength and resistance to weight, harsh environments, and heavy use. The two stainless steel karabiners on either extremity are easily attached onto your BCD and secured to your accessory at the same time. The quick release clip in the middle enables you to secure your device close to you when not in use and quickly release it and extend the coil when you want to use it. This heavy-duty quick release lanyard enables you to keep a streamlined position without having to worry about damaging your equipment and the marine environment. The lanyard extends to 1.3m (51 inches) and can support upto 50kg (110 lbs) Price: US$ Price (inc tax): US$ /403

43 Name: Dive Retractor Ref: Manufacturer: Aropec This dive retractor is a fantastic device to secure your valuable equipment during a dive. There is nothing more frustrating than watching one of your dive gear slip out of your pocket during a dive and fall down into the deep blue without any hope of retrieving it. This spring loaded dive retractor is the solution to keeping your dive gear secure while diving. Simply clip on any dive equipment you wish to secure, such as your torch for example, and then clip the retractor to your BCD. During your dive you can easily reach your secured gear and use it as you would normally as the retractor cable has an extension capacity of 91 cm (36 inch). Once you release your device, it will slowly and securely wind itself back to the retractor, therefore preventing any risk of entanglement during the dive. The retraction force is 510gr (18 oz), therefore making this retractor easy to use. Price: US$ Price (inc tax): US$ /403

44 Name: Stainless Steel Camera Tray Screw Ref: Manufacturer: Other This camera tray screw is the perfect add-on to your save-the-day bag! It is made of stainless steel to ensure resistance to salt water environments and will allow you to replace any lost or broken camera tray screw. This camera tray screw could save the day on your dive. Price: US$ 9.06 Price (inc tax): US$ /403

45 Name: Ball Mount Ref: Manufacturer: Diving Solutions (Asia) LLP This ball mount is designed to allow the Diving Solutions LED torches or any other accessory to be used with butterfly clamps. They are made from aluminium and anodised to minimize corrosion. The ball is 25mm (1 inc) diameter and features a large O-ring to improve grip and reduces slippage. The overall length of the mount is 42.5mm (1.7 inches), and it has an M5 thread in the end for attachment. Price: US$ Price (inc tax): US$ /403

46 Name: Gopro QR Mount (Female) Ref: Manufacturer: Other This GoPro quick release mount is the most practical accessory for your GoPro! It is a female design that enables you to simply and quickly slide your GoPro on and off while keeping it completely secure! It comes with a double-sided adhesive patch for you to easily fix your GoPro mount anywhere. Price: US$ 2.84 Price (inc tax): US$ /403

47 Name: Gopro Glove Mount Ref: Manufacturer: Other This GoPro hand mount is a great accessory for divers who wish to take amazing videos and photos of their dives, but wish stay hands-free! This hand mount fits around your hand and wrist like a glove. It is designed to slide on your thumb and strap around your hand, leaving your hands and fingers completely free to move. The strap is adjusted via a Velcro band to enable you to fit it perfectly to the size of your wrist. Moreover, it fits both the right and the left hand to give you maximum flexibility. This GoPro glove mount is designed so you can attach your GoPro directly to it without the need of extra adapters. It enables you to take shots in any directions as the mount can rotate 360 degrees, and also comes with a locking button for capturing stable shots. It is made of a very resistant material perfect for saltwater environments, therefore making it a great accessory for divers. Price: US$ Price (inc tax): US$ /403

48 Name: Gopro Float/handle Ref: Manufacturer: Diving Solutions (Asia) LLP This GoPro float is an essential accessory for those wanting to go snorkelling or diving without fear of losing their GoPro. This GoPro handle enables you to reach the object or marine creature you would like a picture or video of very easily and helps prevent shakiness so you can take great pictures and videos underwater! Moreover, this handle is positively buoyant, meaning that if you accidentally drop your GoPro, it will never sink! It is made of a bright yellow plastic material making the device highly visible above the water in case you accidentally let it go, and highly resistant to saltwater environments. This GoPro float connects directly to the camera without the need to use adapters, and comes with a lanyard that you can pass around your wrist while diving or snorkelling, and therefore helps prevent you from losing your camera! Price: US$ Price (inc tax): US$ /403

49 Name: Gopro Frame-Single Handed Ref: Manufacturer: Diving Solutions (Asia) LLP This GoPro frame is the perfect accessory for those who want to use their GoPro or action camera underwater! This great diving accessory will enable you to shoot more stable videos and pictures underwater. It is a single-handed frame, which allows you to keep a hand free during your dive. It is made of aluminium to ensure a great resistance to saltwater environments and provide a lasting lifespan. The frame can accommodate GoPro, Sony, or any other small action cameras. It is designed with 6 M5 holes to enable you to mount your camera anywhere on the handle and therefore shoot from any angle. It comes with one Allen key, 2 M5 Mushroom Head Screws and 2 M5 Grub screws. The GoPro QR mount is also provided with the single-handed frame so you can start using it straight away. Price: US$ Price (inc tax): US$ /403

50 Name: Gopro Frame-Double Handed Ref: Manufacturer: This double-handed GoPro frame is perfect for producing high-quality underwater videos. Its slick black aluminium structure measures 12 inches (304 mm) long and 4,33 inches (110 mm) wide and ensures sturdiness and water resistance. It has convenient finger grips on either side of the rectangular frame enabling you to keep a firm hold in order to produce smooth and stable videos while diving. This frame is also very versatile and is suitable to fit GoPro, Sony, and other small cameras. The GoPro quick release mount enables you to secure your GoPro quickly and easily on the frame making it very practical. It has ten M5 holes and is supplied with two M5 SS mushroom screws and two M5 SS grub screws, which can be used to mount your camera as well as extra accessories such as, torches, ball mounts, and clips. Price: US$ Price (inc tax): US$ /403

51 Name: Gopro Hero 3+/4 Filter (Red) Ref: Manufacturer: Other Press-on red filter for GoPro Hero 3+/4 underwater casings. The red filter helps to colour correct your photographs and video to give a better colour and contrast * Camera for illustration only Price: US$ 9.06 Price (inc tax): US$ /403

52 Name: Gopro Hero 3/SJCAM 58mm Lens Ring Ref: Manufacturer: Other This Gopro lens ring is a great accessory for those wishing to add lenses or filters onto their Gopro, such as a red filter, a macro lens, or a fish eye. This lens ring is designed to fit the Gopro Hero 3 or JSCAMM exclusively. It is designed to be placed onto your Gopro case and is fixed by a screw on the side. It easily slides onto the Gopro case and can be removed whenever is necessary. It is made of aluminum, which ensures great resistance to salt-water environments, and therefore ensures a longer lifespan. It is designed for a 58mm lens or filter that can simply and quickly be threaded onto this Gopro ring for your convenience. This Gopro ring is the perfect addition for divers and snorkelers who wish to make great underwater photos and videos. Price: US$ Price (inc tax): US$ /403

53 Name: Gopro Macro Lens Kit Ref: Manufacturer: Other This GoPro macro lens kit is a wonderful accessory to add to your diving equipment. This great kit is designed for all recreational divers who would like to take closer pictures and movies of small critters on their dive using their GoPro. This macro lens kit allows your GoPro to decrease the distance necessary for it to focus. This device enables you to take close up pictures without having to get too close to the object. It is constructed with high definition optical glass to ensure you take pictures of high quality. Moreover, this macro lens kit comes with four different types of close up lenses, +1, +2, +4 and +10 therefore giving you a wide range of possibilities for macro pictures, and a nylon lens pouch to ensure the lenses do not get damaged during transport or storage. These lenses can be fitted on a 58 mm GoPro lens mount. Price: US$ Price (inc tax): US$ /403

54 Name: Gopro 58mm Lens Cap Ref: Manufacturer: Other This GoPro lens cap is a great accessory to add to your camera gear. This lens cap enables you to protect your GoPro lens from the surroundings, therefore, avoiding any risk of scratching or dirtying the lens. This GoPro cap is perfect for travelling, and it fully protects your lens, therefore proving a long lifespan for your equipment. Price: US$ 3.97 Price (inc tax): US$ /403

55 Name: Gopro Hero 3+/4 58mm Lens Ring Ref: Manufacturer: Other This GoPro lens ring is a great accessory for those wishing to add lenses or filters onto their GoPro, such as a red filter, a macro lens, or a fisheye. This lens ring is designed to fit the GoPro Hero 3+, and Hero 4 exclusively. It is placed onto your GoPro case and is fixed by a screw on the side. It is designed to enable you to take pictures and videos with or without the lens, as the ring can be pulled away and placed back at any point, as you would do to open or shut a window. It is made of aluminium, which ensures a great resistance to salt-water environments, and therefore ensures a longer lifespan. It is designed for a 58mm lens or filter that can simply and quickly be threaded onto this GoPro ring for your convenience. This GoPro ring is the perfect addition for divers and snorkelers who wish to make great underwater photos and videos. Price: US$ Price (inc tax): US$ /403

56 Name: Gopro 58mm Filter Kit Ref: Manufacturer: Other This GoPro filter kit is a wonderful accessory to add to your diving equipment. This is a great kit for any divers who would like to adjust the colour balance on their pictures and videos taken while diving with their GoPro.. This filter kit enables you to readjust the balance on your pictures, therefore, giving you a better quality for your videos and photos. The filter is simply placed onto the GoPro underwater casing and removed the same way. This kit comes with three different filters of 58mm diameter: A red filter which is used at depths of between 10 and 20 meters and allows you to restore the red pigments that are lost at depth. A yellow filter which is used in the morning in tropical blue waters and at a shallow depth. A purple filter, which is perfect to use in green water. Price: US$ Price (inc tax): US$ /403

57 Name: GoPro Hero 5/6-Filter (Red+Purple) Ref: Manufacturer: Other Press fit, square red & purple filters for GoPro Hero 5 & 6 Supersuit. The red filter helps to colour correct your photographs and video in blue water, while the purple filter is used for green water colour correction. Includes pouch for filters. Price: US$ Price (inc tax): US$ /403

58 Name: GoPro Bar Mount Ref: Manufacturer: Other GoPro camera mount for round bars/objects (up to 40mm diameter), provides a stable mounting for your camera to improve the quality of the photo and video recordings. Price: US$ 5.67 Price (inc tax): US$ /403

59 Name: GoPro Flex Arm Ref: Manufacturer: Other Flexible/bendable mount for GoPro camera, one side fits into GoPro quick release mount while the other fits the GoPro camera mount. Price: US$ Price (inc tax): US$ /403

60 Name: Gopro QR Mount (Male) Ref: Manufacturer: Other The male part of GoPro quick release mount fits onto the camera. Price: US$ 2.27 Price (inc tax): US$ /403

61 Name: GoPro Wrench (Plastic) Ref: Manufacturer: Other Avoid the drooping camera, because of a loose screw, use this spanner/wrench for tightening the GoPro thumb screw. Price: US$ 2.27 Price (inc tax): US$ /403

62 Name: GoPro Hero 5/6 58mm Lens Ring Ref: Manufacturer: Other This GoPro lens ring is a great new accessory for those wishing to add lenses or filters onto their GoPro, such as a red filter, a macro lens, or a fisheye. This lens ring is designed to fit GoPro Hero 5 & 6 exclusively. It is placed onto your GoPro case and is fixed by a screw on the side. It is designed to enable you to take pictures and videos with or without the lens as the ring can be pulled away and placed back at any point, as you would do to open or shut a window. It is made of aluminium, which ensures a great resistance to salt-water environments, and therefore ensures a longer lifespan. It is designed for a 58mm lens or filter that can simply and quickly be threaded onto this GoPro ring for your convenience. This GoPro ring is the perfect addition for divers and snorkelers who wish to make great underwater photos and videos. Price: US$ Price (inc tax): US$ /403

63 Name: Floaty Lanyard Ref: Manufacturer: Other Color: Pink,Stock:10,Color: Pink,Color: Pink,Price: US$ 6.80 Color: Black,Stock:9,Color: Black,Color: Black,Price: US$ 6.80 Color: Red,Stock:10,Color: Red,Color: Red,Price: US$ 6.80 Color: Blue,Stock:5,Color: Blue,Color: Blue,Price: US$ 6.80 These floating lanyards are great for securing those valuable items like your camera or torch. Should you drop your beloved toy, the lanyard will help it to float to the surface, making it easier to find. If your boating or surfing, the floating lanyard is a great way to secure your keys; never lose things again! Price: US$ 6.80 Price (inc tax): US$ /403

64 Name: Accessory Bag Ref: Manufacturer: Other Small accessory bag to organize your GoPro accessories such as screws, filters, casings, etc. Dimensions : Price: US$ 1.14 Price (inc tax): US$ /403

65 Name: GoPro Handle Bar Clamp Ref: Manufacturer: Other GoPro clamp to fit around objects such as handlebars, frames, etc. Quick locking for easy fitting & removal. Price: US$ 6.80 Price (inc tax): US$ /403

66 Name: GoPro Screw (Plastic) Ref: Manufacturer: Other Replacement thumb screw for GoPro (or similar) cameras. Price: US$ 1.14 Price (inc tax): US$ /403

67 Name: GoPro Screw Set (Aluminium) Ref: Manufacturer: Other Set of three GoPro screws in anodized aluminium, two short and one long length. Price: US$ 5.10 Price (inc tax): US$ /403

68 Name: GoPro Knuckle Handle Ref: Manufacturer: Other This GoPro handle is compact and comfortable to use, four fingers fit through the holes which go over your knuckles. Once in the hand, it provides a sturdy and secure way to hold your GoPro camera; even if you open your hand you will not drop your camera. The handle is made from a rugged plastic and features a nickel-plated nut and a long clamping screw. This handle will fit most action camera`s that feature a GoPro style mount (as seen in the photographs). Price: US$ 6.80 Price (inc tax): US$ /403

69 Name: Butterfly Clamp (2 Ball) Ref: Manufacturer: Diving Solutions (Asia) LLP Stock: -1 These butterfly (ball) clamps are made to clamp two 25mm (1 inch) ball mounts; which is a standard size for scuba diving camera accessories. They allow mounting of camera trays to ball arms, or ball arms to torches, strobes, etc. These clamps are made from aluminium and black anodised for corrosion resistance and have stainless steel springs. The two halves of the clamps are set at angles to each other which give a greater range of movement side to side (up to 60 degrees) when compared to a standard flat type of butterfly clamp. Price: US$ Price (inc tax): US$ /403

70 Name: Ball Arm (15cm) Ref: Manufacturer: Diving Solutions (Asia) LLP These ball arms are suitable for attached many kinds of accessories to your camera tray. They are 15cm (6 inches) long and feature a 25mm (1 inch) ball at each end. The arms are machined for solid aluminium and anodised black for corrosion resistance; they are light weight (but negatively buoyant) and strong to support your equipment in and out of the water. Price: US$ Price (inc tax): US$ /403

71 Name: Toshiba 16Gb SD-Card Ref: Manufacturer: Other Toshiba 16Gb SD-Card, 48MB/s Class 10 card. Suitable for high speed storage necessary for modern digital cameras. Price: US$ Price (inc tax): US$ /403

72 Name: Dive Retractor (Stainless Steel) Ref: Manufacturer: Aquatec This stainless steel retractor, allows you to securely attach diving accessories such as a torch, camera to yourself. When needed simply pull the item and use, when finished release and the retractor will automatically reel it back in. The maximum length of the retractor is 75cm (29.5 inches), with a pull force of 720 grams (1.6 lbs). The casing and with are made from corrosion resistant 304 stainless steel and features a belt clip on the back for attachment. The body of the retractor is 52mm diameter, with a 29mm diameter split ring on the end for attaching to accessories. Price: US$ Price (inc tax): US$ /403

73 Name: Garmin Virb Ultra 30 Ref: Manufacturer: Garmin The Garmin Virb Ultra 30 action camera, gives you 4K video quality with voice control and data overlays. Capable of 4K/30fps video, and 12-megapixel photos with manual settings available, and a 1.75-inch touchscreen display. A 3 axis image stabilization helps to capture steady footage and the hand's free voice control adds to ease of use. There are built-in sensors for GPS and G-Metrix to record distance, height, and speed onto your videos. Battery life is up to 90 minutes at 1080p resolutions or 60 minutes at 4K. The camera accepts microsd cards, up to a capacity of 128Gb (Class-10/UHS-1). The Virb also includes a waterproof casing suitable for scuba diving to a depth of 40m. Price: US$ Price (inc tax): US$ /403

74 Name: Ikelite Dual AF35 Tray Ref: Manufacturer: Ikelite A sleek aluminum tray with a black hard anodized surface to resist corrosion. There are multiple mounting options to allow it to fit most compact camera setups, with a 1/4-20 tripod mount in the center. The ends of the tray can accept a 3/4inch (19mm) flex arm with t-slot mounting or an Ikelike Quick Release Handle. Price: US$ Price (inc tax): US$ /403

75 Name: Ikelite PEN E-PL8 Casing Ref: Manufacturer: Ikelite This full-featured durable ABS underwater casing is for the Olympus PEN E-PL8 camera. All the controls on the casing are located in a similar position to the camera itself, to make its use more intuitive and easy to use. The camera mounts onto a plate that secures it to the bottom of the casing and is front loading into the casing. The casing features an integrated TTL circuit, it is powered by the strobe meaning it is maintenance free and doesn't require battery changes. Only Ikelite DS strobes are currently capable of powering the circuit. The is a direct connection to the camera`s hot-shoe connector, for extra accessories. Two 1/4-20 inch tripod threads are provided on the bottom of the casing to secure mounting to a tray assembly. NOTE: Lens port not included. Price: US$ 1, Price (inc tax): US$ 1, /403

76 Name: Battery Box (Double)-Waterproof Ref: Manufacturer: Diving Solutions (Asia) LLP This plastic box can fit two batteries and has a waterproof o-ring seal around the lid to keep your batteries safe even in a wet environment. The lid features 4 clips to keep it secure and maintain the waterproof seal. Price: US$ 4.53 Price (inc tax): US$ /403

77 Name: Battery Box (Quad) Ref: Manufacturer: Diving Solutions (Asia) LLP Price: US$ 4.53 Price (inc tax): US$ /403

78 Name: Ikelite Action Tray II Ref: Manufacturer: Ikelite The Ikelite Action Tray II is a slim and streamlined camera tray, designed especially for ultra compact and action cameras such as the GoPro. The tray is designed to be lighter and moves the location of the handle closer to the camera for a more comfortable feel. The tray features a central mounting for GoPro`s and other action cameras, as well as other mounting points as 76mm (3 inches) spacings. The Action Tray is machined from aluminium and anodised to reduce corrosion. Price: US$ Price (inc tax): US$ /403

79 Name: Ikelite Action Tray II with Handle Ref: Manufacturer: Ikelite The Ikelite Action Tray II is a slim and streamlined camera tray, designed especially for ultra compact and action cameras such as the GoPro. The addition of the Ikelite Quick Release handle has been a favourite for divers for years. The tray is designed to be lighter and moves the location of the handle closer (right side) to the camera for a more comfortable feel. The tray features a central mounting for GoPro`s and other action cameras, as well as other mounting points as 76mm (3 inches) spacings. The Action Tray is machined from aluminium and anodised to reduce corrosion. Price: US$ Price (inc tax): US$ /403

80 Name: GoPro Tripod Mount Ref: Manufacturer: Diving Solutions (Asia) LLP This GoPro tripod mount, allows you to mount your GoPro camera directly onto a camera tripod (or other accessories) that have a 1/4-20 threaded screw. The adaptor features a textured rubber base to securely hold the adaptor in place once the screw is tightened. A plastic GoPro screw and nut are provided in the kit for ease of use. Price: US$ 5.67 Price (inc tax): US$ /403

81 Name: Dive Retractor (Plastic) Ref: Manufacturer: Aquatec The dive retractor provides you an easy way to attach accessories to yourself without the fear of dropping them. It is suitable for accessories such as compact cameras, torches, pointers, etc; the retraction force is 510gr (18oz). It is constructed from ABS with stainless steel wire, which can extend to 90cm (36 inches). Price: US$ Price (inc tax): US$ /403

82 Name: DS Mini 350L Ref: Manufacturer: Diving Solutions (Asia) LLP Accessories - Charger: NO Charger,Stock:5,Accessories - Charger: NO Charger,Accessories Charger: NO Charger,Price: US$ Accessories - Charger: Double Charger,Stock:3,Accessories - Charger: Double Charger,Accessories - Charger: Double Charger,Price: US$ Accessories - Charger: Single Charger,Stock:3,Accessories - Charger: Single Charger,Accessories - Charger: Single Charger,Price: US$ This DS Mini F350 torch is a Diving Solution brand torch that is designed to be used by divers as a red laser pointer. This a great product for professional divers who wish to point out features and marine life to their divers and students, but also for photographers who can use the laser pointer as a way to measuring marine objects in their pictures. This torch is of a very compact design making it practical to carry in a pocket and in one hand. It is made of aluminum that has been anodized coated therefore ensuring its resistance to corrosion and durability. Moreover, it is sealed by a double o-ring placed between the head and the body of the torch and is designed with an extra long thread to ensure maximum protection against flooding. It has an incredible battery life of 40 hours, a maximum depth of 200m and comes with 2 Lithium-ion batteries and 1 charger. DATASHEET DOWNLOAD Price: US$ Price (inc tax): US$ /403

83 Name: DS Mini 350L - Head Ref: Manufacturer: Diving Solutions (Asia) LLP Add a Red Laser Pointer to your selection of heads for the DS Mini LED torch, use the laser pointer for indication or with two you can use them for scaling your photographs and measuring the size of objects! Price: US$ Price (inc tax): US$ /403

84 Name: Aquatec Tank Light Ref: Manufacturer: Aquatec Color: Pink,Stock:4,Color: Pink,Color: Pink,Price: US$ Color: Green,Stock:3,Color: Green,Color: Green,Price: US$ Color: Orange,Stock:2,Color: Orange,Color: Orange,Price: US$ Color: Red,Stock:3,Color: Red,Color: Red,Price: US$ Color: Blue,Stock:3,Color: Blue,Color: Blue,Price: US$ Flashing LED tank light, fade-in/fade-out rainbow blinking LED. Operates on a single AAA battery, with 50hr burn time. Max operating depth: 120m Includes 5pc of tank o-ring and o-ring pick. Price: US$ Price (inc tax): US$ /403

85 Name: DS Mini 350R Ref: Manufacturer: Diving Solutions (Asia) LLP Accessories - Charger: NO Charger,Stock:10,Accessories - Charger: NO Charger,Accessories Charger: NO Charger,Price: US$ Accessories - Charger: Double Charger,Stock:10,Accessories - Charger: Double Charger,Accessories - Charger: Double Charger,Price: US$ Accessories - Charger: Single Charger,Stock:10,Accessories - Charger: Single Charger,Accessories - Charger: Single Charger,Price: US$ This DS Mini R350 torch is a Diving Solution brand torch that is designed to be used by divers to help reduce blinding our buddy or other divers. But also to allow you to get closer to the creatures. Many creatures in the sea are not sensitive to red light, and using this torch will startle them less, allowing you to get closer. This torch is of a very compact design making it practical to carry in a pocket and in one hand. It is made of aluminium that has been anodized coated therefore ensuring its resistance to corrosion and durability. Moreover, it is sealed by a double o-ring placed between the head and the body of the torch and is designed with an extra long thread to ensure maximum protection against flooding. This amazing torch has a battery life of 3 hours, a maximum depth of 200m and produces a brightness of 135 lumens. It includes 2 Lithium-ion batteries, and charger (if selected). DATASHEET DOWNLOAD Price: US$ Price (inc tax): US$ /403

86 Name: DS Mini 350R - Head Ref: Manufacturer: Diving Solutions (Asia) LLP Add a Red torch to your selection of heads for the DS Mini LED torch, the red light will produce a less blinding effect on divers while at the same time startle the creatures less. Due to many creatures in the sea are not sensitive to red light, and using this torch will startle them less, allowing you to get closer. Price: US$ Price (inc tax): US$ /403

87 Name: Compression Calfs (Pair) - Black Ref: Manufacturer: Aropec Size: S,Stock:10,Size: S,Size: S,Price: US$ Size: M,Stock:0,Size: M,Size: M,Price: US$ Size: L,Stock:7,Size: L,Size: L,Price: US$ Size: XL,Stock:0,Size: XL,Size: XL,Price: US$ Size: XS,Stock:23,Size: XS,Size: XS,Price: US$ These Aropec compression calf sleeves are great pieces of equipment for divers as well as for anyone doing regular physical exercises. This pair of Aropec compression calf sleeves can be worn either during the physical effort to help support the calf and help provide more efficient calf movement or during recovery time. These compression sleeves for your calves are the perfect piece of equipment to help reduce the risks of cramping and fatigue of your claves after exercising. They enable your calves to recover more quickly and increase their strength and power. They are designed to be wrapped around your calves and to provide a high level of compression while supporting your calves so the muscles function naturally. These compression calf sleeves help reduce the risks of injuries and help increase the blood circulation from your feet to your legs, thus helping the calf muscles to recover more efficiently. They are the perfect product to help divers recover after their dives. Price: US$ Price (inc tax): US$ /403

88 Name: Compression Calfs (Pair) - White Ref: Manufacturer: Aropec Size: S,Stock:5,Size: S,Size: S,Price: US$ Size: M,Stock:4,Size: M,Size: M,Price: US$ Size: L,Stock:13,Size: L,Size: L,Price: US$ Size: XL,Stock:12,Size: XL,Size: XL,Price: US$ Size: XS,Stock:0,Size: XS,Size: XS,Price: US$ These Aropec compression calf sleeves are great pieces of equipment for divers as well as for anyone doing regular physical exercises. This pair of Aropec compression calf sleeves can be worn either during physical effort to help support the calf and help provide more efficient calf movement, or during recovery time. These compression sleeves for your calves are the perfect piece of equipment to help reduce the risks of cramping and fatigue of your claves after exercising. They enable your calves to recover more quickly and increase their strength and power. They are designed to be wrapped around your calves and to provide a high level of compression while supporting your calves so the muscles function naturally. These compression calf sleeves help reduce the risks of injuries and help increase the blood circulation from your feet to your legs, thus helping the calf muscles to recover more efficiently. They are the perfect product to help divers recover after their dives. Price: US$ Price (inc tax): US$ /403

89 Name: Compression Sleeves (Pair) - Black Ref: Manufacturer: Aropec Size: S,Stock:10,Size: S,Size: S,Price: US$ Size: M,Stock:14,Size: M,Size: M,Price: US$ Size: L,Stock:13,Size: L,Size: L,Price: US$ Size: XL,Stock:10,Size: XL,Size: XL,Price: US$ Size: XS,Stock:10,Size: XS,Size: XS,Price: US$ These Aropec compression arm sleeves are great pieces of equipment for divers as well as for anyone doing regular physical exercises. This pair of Aropec compression arm sleeves can be worn either during physical effort to help support your arms, or during recovery time. These compression sleeves for your arms are the perfect equipment to help reduce the risks of cramping and fatigue of your forearms after exercising. They enable your arms, tendons, and biceps to recover more quickly and increase their strength and power. They are designed to be wrapped around your arms and to provide a gradual compression while supporting them so the muscles function naturally. These compression arm sleeves help reduce the risks of injuries and help increase the blood circulation, thus helping the calf muscles to recover more efficiently. The Aropec technology helps with regulating your temperature by transporting moisture away from you arms. Moreover, they are designed with UPF 50+ protection making them perfect for divers. Price: US$ Price (inc tax): US$ /403

90 Name: Compression Sleeves (Pair) - White Ref: Manufacturer: Aropec Size: S,Stock:9,Size: S,Size: S,Price: US$ Size: M,Stock:13,Size: M,Size: M,Price: US$ Size: L,Stock:14,Size: L,Size: L,Price: US$ Size: XL,Stock:0,Size: XL,Size: XL,Price: US$ Size: XS,Stock:3,Size: XS,Size: XS,Price: US$ These Aropec compression arm sleeves are great pieces of equipment for divers as well as for anyone doing regular physical exercises. This pair of Aropec compression arm sleeves can be worn either during physical effort to help support your arms, or during recovery time. These compression sleeves for your arms are the perfect equipment to help reduce the risks of cramping and fatigue of your forearms after exercising. They enable your arms, tendons, and biceps to recover more quickly and increase their strength and power. They are designed to be wrapped around your arms and to provide a gradual compression while supporting them so the muscles function naturally. These compression arm sleeves help reduce the risks of injuries and help increase the blood circulation, thus helping the calf muscles to recover more efficiently. The Aropec technology helps with regulating your temperature by transporting moisture away from you arms. Moreover, they are designed with UPF 50+ protection making them perfect for divers. Price: US$ Price (inc tax): US$ /403

91 Name: Dive Watch/Computer Screen Protector Ref: Manufacturer: Aropec Dive computers are one of the most essential dive gear, and being able to read the screen during a dive is critical to a diver s safety. Therefore, it is very important to protect the screen of your dive computer to avoid any damage such as scratches, which will impede your ability to read the information it provides during a dive. This revolutionary screen protector will fit most dive computers and can be removed and replaced as needed. It is made of clear silicon rubber allowing the round shaped centre to be easily placed on your computer screen. It is designed with two loops on either side of the screen protector allowing you to fit the straps of your dive computer inside each of them, therefore securing the screen protector onto your computer. You are then able to remove your screen protector after each dive in order to rinse your computer and screen protector thoroughly, thus preventing accumulation of salt and dirt in between the screen protector and your screen. Price: US$ Price (inc tax): US$ /403

92 Name: Suunto Wireless Transmitter Battery Ref: Manufacturer: Other Stock: -1 It is not an ideal situation to have to do a battery change in the field, but get yourself a small waterproof box and bring along a spare battery and o-ring for your transmitter! Don`t forget you`ll need some silicon grease for the o-ring before re-assembly. NOTE: It is recommended that you always change the o-ring at the same time as the battery. Price: US$ Price (inc tax): US$ /403

93 Name: Suunto Wireless Transmitter O-Ring Ref: Manufacturer: Other Stock: -6 This is a replacement O-Ring for a Suunto Wireless Tank Transmitter. It is always recommended to replace the O-ring with every battery change, flooding the transmitter is not a situation you want to deal with! Remember to apply a thin layer of silicon grease to the o-ring during fitting. Price: US$ 2.27 Price (inc tax): US$ /403

94 Name: Dive Computer O-Ring Ref: Manufacturer: Other Model: Nitek,Stock:20,Model: Nitek,Model: Nitek,Price: US$ 2.27 Model: PG3000,Stock:20,Model: PG3000,Model: PG3000,Price: US$ 2.27 Model: IQ700,Stock:20,Model: IQ700,Model: IQ700,Price: US$ 2.27 Model: N2ition,Stock:20,Model: N2ition,Model: N2ition,Price: US$ 2.27 Model: Aladin Pro,Stock:20,Model: Aladin Pro,Model: Aladin Pro,Price: US$ 2.27 Model: Pro Plus 2,Stock:20,Model: Pro Plus 2,Model: Pro Plus 2,Price: US$ 2.27 Model: Omni,Stock:20,Model: Omni,Model: Omni,Price: US$ 2.27 Model: ReSource,Stock:20,Model: ReSource,Model: ReSource,Price: US$ 2.27 Model: Source,Stock:20,Model: Source,Model: Source,Price: US$ 2.27 Model: Data,Stock:20,Model: Data,Model: Data,Price: US$ 2.27 Model: Matrix Master,Stock:20,Model: Matrix Master,Model: Matrix Master,Price: US$ 2.27 Model: Prodigy,Stock:20,Model: Prodigy,Model: Prodigy,Price: US$ 2.27 Model: Veo 100/Veo 200,Stock:20,Model: Veo 100/Veo 200,Model: Veo 100/Veo 200,Price: US$ 2.27 Model: Cobra/Vyper/Vytec/Gekko/Zoop,Stock:18,Model: Cobra/Vyper/Vytec/Gekko/Zoop,Model: Cobra/Vyper/Vytec/Gekko/Zoop,Price: US$ 2.27 Model: Plus,Stock:20,Model: Plus,Model: Plus,Price: US$ 2.27 Model: Archimedes 2,Stock:20,Model: Archimedes 2,Model: Archimedes 2,Price: US$ 2.27 These replacement dive computer O-rings are the perfect addition to your save-a-dive kit bag. It is always recommended that you change the O-ring when you change the dive computer battery to lower the chances of flooding the computer. Having a replacement dive computer O-ring in your spares kit is a very lightweight accessory that truly could save the day! Price: US$ 2.27 Price (inc tax): US$ /403

95 Name: Dive Computer Battery Ref: Manufacturer: Other Model: Nitek,Stock:20,Model: Nitek,Model: Nitek,Price: US$ 5.10 Model: IQ700,Stock:20,Model: IQ700,Model: IQ700,Price: US$ 5.10 Model: N2ition,Stock:20,Model: N2ition,Model: N2ition,Price: US$ 5.10 Model: Omni,Stock:20,Model: Omni,Model: Omni,Price: US$ 5.10 Model: ReSource,Stock:20,Model: ReSource,Model: ReSource,Price: US$ 5.10 Model: Source,Stock:20,Model: Source,Model: Source,Price: US$ 5.10 Model: Data,Stock:20,Model: Data,Model: Data,Price: US$ 5.10 Model: Prodigy,Stock:20,Model: Prodigy,Model: Prodigy,Price: US$ 5.10 Model: Veo 100/Veo 200,Stock:20,Model: Veo 100/Veo 200,Model: Veo 100/Veo 200,Price: US$ 5.10 Model: Wisdom,Stock:20,Model: Wisdom,Model: Wisdom,Price: US$ 5.10 Model: Cobra/Vyper/Vytec/Gekko/Zoop,Stock:16,Model: Cobra/Vyper/Vytec/Gekko/Zoop,Model: Cobra/Vyper/Vytec/Gekko/Zoop,Price: US$ 5.10 Model: Archimedes 2,Stock:20,Model: Archimedes 2,Model: Archimedes 2,Price: US$ 5.10 These 3 volt, lithium dive computer batteries are the perfect addition to your save-a-dive kit bag. Imagine being all kitted up and ready dive and your computer shows low battery. Having a spare lithium dive computer battery in your spares kit is a very lightweight accessory that truly could save the day! NOTE: It is recommended you always change the o-ring when replacing the battery. Price: US$ 5.10 Price (inc tax): US$ /403

96 Name: Garmin Screen Protector - Glass Ref: Manufacturer: Diving Solutions (Asia) LLP This is a tempered glass screen protector, protect your investments screen from scratches. The screen protector is 37mm diameter and fits a Garmin Descent or 5X. It includes a 2 stage cleaning cloth to ensure proper adhesion. Price: US$ 5.67 Price (inc tax): US$ /403

97 Name: Garmin Screen Protector - Film (x2) Ref: Manufacturer: Diving Solutions (Asia) LLP This is a film screen protector, to minimise scratches to the glass screen of your Garmin watch. They are sold in pairs and include polishing cloth, to use during fitting. The screen protector is 39mm diameter. Price: US$ 4.53 Price (inc tax): US$ /403

98 Name: 26mm Stainless Steel Band Ref: Manufacturer: Diving Solutions (Asia) LLP This stainless steel wristband is suitable for Garmin models 5X and Descent and adds a stylish new look to your watch. The strap features a stainless steel interlocking clasp, with removable links to adjust the strap to suit your wrist size. This is a fashion band, we do not recommend its use for scuba diving. Two screwdrivers are included for removing the existing bars so the strap can be fitted. Note this strap is NOT a Quickfit strap. Price: US$ Price (inc tax): US$ /403

99 Name: Silicone Boot, for Garmin Descent, X5 Ref: Manufacturer: Diving Solutions (Asia) LLP Color: Blue,Stock:3,Color: Blue,Color: Blue,Price: US$ 9.06 Color: Burgandy,Stock:2,Color: Burgandy,Color: Burgandy,Price: US$ 9.06 Color: White,Stock:2,Color: White,Color: White,Price: US$ 9.06 These silicone rubber boots, help to protect your watch from bumps and scratches; they are ideal for use during scuba diving. They not only help protect your Descent dive computer, they also help you personalize it by adding color! The heart rate sensor is still able to function with the boot fitted, they can easily and quickly be fitted or removed as necessary. Price: US$ 9.06 Price (inc tax): US$ /403

100 Name: Stainless Steel Shears Ref: Manufacturer: Aropec These stainless steel EMT shears are the perfect piece of safety equipment for divers. In fact, EMT shears are much safer and easier to use than dive knives. These EMT shears can be used to cut through ropes, nets, lines, kelp and even wiring during a dive and above water. These are the perfect devices to avoid dangerous entanglement during a dive. Moreover, they are made of stainless steel, therefore, ensuring a great resistance to saltwater environments, as they resist corrosion and provide long lasting life. They are designed with sharp blades with a rounded tip for more safety and non-slip handles that ensure you retain maximum control and flexibility during use. These EMT shears are 19 cm (7.5 inches) long and also come with a strong Nylon pouch for easy storage, great portability, and more safety. Price: US$ Price (inc tax): US$ /403

101 Name: Line Cutter Ref: Manufacturer: Aropec Color: Black,Stock:5,Color: Black,Color: Black,Price: US$ Color: Yellow,Stock:5,Color: Yellow,Color: Yellow,Price: US$ Color: Orange,Stock:5,Color: Orange,Color: Orange,Price: US$ Line cutters provide the perfect alternative to a dive knife, allowing easy cutting of lines with only one hand without cutting yourself! Also, a great item to have in the car (cutting seatbelts) or anywhere else you may have to cut something in emergencies. This includes the Line cutter and spare blades. Price: US$ Price (inc tax): US$ /403

102 Name: Eezycut Line Cutter (Trilobite) Ref: Manufacturer: Eezycut Color: Glow-in-dark,Stock:2,Color: Glow-in-dark,Color: Glow-in-dark,Price: US$ Color: Black,Stock:3,Color: Black,Color: Black,Price: US$ This Eezycut trilobite is the forefront of Emergency Cutting Tool (E.C.T.), developed for extreme sports and rescue service providers. Perfect for scuba divers, this advanced cutting tool provides clean and effortless cutting action of nets, line and rope up to 8 mm thick. Its ergonomic design allows a more stable, safer, and quicker cut, and can be used in various dive situations thanks to its double-sided shape. It ensures that the cut is distributed along the entire length of the blades, therefore maintaining their sharpness throughout use. Measuring 6,5 inches (165 mm) in length and 4,5 inches (114 mm) in width and supplied with a pouch, it is secured in place by a Velcro flap and fits perfectly on a BCD or inside a pocket. The Eezycut Trilobite is also provided with two spare blades making it a long-lasting and efficient essential for divers. Price: US$ Price (inc tax): US$ /403

103 Name: Dive Knife (Stainless Steel) Ref: Manufacturer: Aropec Stock: -4 This dive knife is made from 304 stainless steel, for reduced corrosion and features a sharp pointed tip. The overall length of the knife is 16cm (6.25 inches), with a blade length of 7cm (2.75 inches). It incorporates a serrated edge and line cutter and includes plastic holster with locking system and a hose mount. Price: US$ Price (inc tax): US$ /403

104 Name: Aquatec Galaxy Knife Ref: Manufacturer: Aquatec The Galaxy knife is made from stainless steel to minimise corrosion. It is a super compact design and great to put into your BCD pocket as a backup while diving. Or keep on your keychain for emergencies. When unfolded the blade locks for safety, the base of the blade has serrations on it to improve cutting or thick lines, etc. Price: US$ Price (inc tax): US$ /403

105 Name: Dive Knife (Titanium) Ref: Manufacturer: Aropec This dive knife is made from Titanium for the best corrosion resistance in the diving industry. It includes a plastic sheath with locking mechanism and a hose mount. The overall length of the knife (in the holder) is 15cm (6.25 inches) and the blade length is 7cm (2.75 inches), and features a sharp point. Price: US$ Price (inc tax): US$ /403

106 Name: Fin Gripper (Pair) Ref: Manufacturer: Aropec Size: M,Stock:5,Size: M,Size: M,Price: US$ 6.80 Size: L,Stock:5,Size: L,Size: L,Price: US$ 6.80 Size: S,Stock:5,Size: S,Size: S,Price: US$ 6.80 These fin grippers will keep your feet perfectly in place while diving and prevent uncomfortable blisters from fin thrusts. Fin grippers are designed to hold your feet firmly in place by fitting over your full-foot fins. They consist of three straps that adapt perfectly around your foot and at the back of your fin. They are placed easily by sliding one strap on top of your foot, one strap on the bottom of your fin, and a third one around the back of it, therefore creating a solid lock. Being made of rubber, they permit enough stretch for you to put them on easily, while ensuring enough rigidity to keep your feet and fins in place. They come in three sizes: small, medium and large, to fit all foot sizes. Our fin grippers are the solution to you never losing your fins again! Price: US$ 6.80 Price (inc tax): US$ /403

107 Name: Quick Release Fin Buckle Ref: Manufacturer: Aropec Spare fin buckles are vital into in a save a dive kit, lose a buckle and it`ll end your diving till you can get to a shop to buy another! These buckles fit most standard types of the fin that have a mushroom-shaped part on the fin to attach the buckle. These buckles suit most open heel fin types sold individually Price: US$ 6.80 Price (inc tax): US$ /403

108 Name: Rubber fin strap-t1 (Pair) Ref: Manufacturer: Aropec These rubber fin straps are an absolute must in every save a dive kit, with a broken fin strap; your diving is done for the day! Keep a pair of spare straps in your bag, just in-case your buddy breaks his/her fin strap too! These fin straps fit most open heel fins (if they don`t we have an alternate design available), they are sold in pairs. Price: US$ 9.06 Price (inc tax): US$ /403

109 Name: Spring Fin Straps (Pair ) - Pin Type Ref: Manufacturer: Aropec Size: M,Stock:0,Size: M,Size: M,Price: US$ Size: L,Stock:0,Size: L,Size: L,Price: US$ Size: XL,Stock:0,Size: XL,Size: XL,Price: US$ Size: S,Stock:1,Size: S,Size: S,Price: US$ This pair of spring fin straps is a necessary piece of equipment for any divers with Jet Fins. These fin straps are especially popular and useful for technical divers, and considered as a great upgrade for cave and wreck divers. As a matter of fact, these fin straps are incredibly resistant and are made to reach the highest safety and quality standards. This pair of spring fin straps is designed with a stainless steel spring to ensure a high level of resistance in marine environments, and avoid any risks of breaking or tearing. The springs are protected by a rubber pad making these straps very comfortable to wear and very easy to place and remove from your booties. They are designed with a pin style attachment which simply slides into the designated holes situated on either side of your fins. These spring fin straps are especially made for Jet Fins models and come in different sizes to fit all: small: 21 cm (8.2 inches) medium: 23.5 cm (9.25 inches) large: 26 cm (10.2 inches) and extralarge: 28 cm (11 inches). Price: US$ Price (inc tax): US$ /403

110 Name: Spring Fin Straps (Pair) - SS Clip Ref: Manufacturer: Aropec Size: M,Stock:3,Size: M,Size: M,Price: US$ Size: L,Stock:3,Size: L,Size: L,Price: US$ Size: XL,Stock:3,Size: XL,Size: XL,Price: US$ Size: S,Stock:3,Size: S,Size: S,Price: US$ This pair of spring fin straps is a necessary piece of equipment for any divers who would like to upgrade their rubber fin straps to more resistant straps. These fin straps are especially popular and useful for technical divers and considered as a great upgrade for cave and wreck divers. As a matter of fact, these fin straps are incredibly resistant and are made to reach the highest safety and quality standards. This pair of spring fin straps is designed with a stainless steel spring to ensure a high level of resistance in marine environments, and avoid any risks of breaking or tearing. The springs are protected by a rubber pad making these straps very comfortable to wear and very easy to place and remove from your booties. They are designed with stainless steel connectors, which simply slide onto the designated knobs situated on each side of your fins. These spring fin straps are made for standard fin types and come in different sizes to fit all: small: 21 cm (8.2 inches) medium: 23.5 cm (9.25 inches) large: 26 cm (10.2 inches) and extra-large: 28 cm (11 inches). Price: US$ Price (inc tax): US$ /403

111 Name: Spring Fin Straps (Pair) - Plastic Buckle Ref: Manufacturer: Aropec Size: M,Stock:2,Size: M,Size: M,Price: US$ Size: L,Stock:2,Size: L,Size: L,Price: US$ Size: XL,Stock:2,Size: XL,Size: XL,Price: US$ Size: S,Stock:2,Size: S,Size: S,Price: US$ This pair of spring fin straps is a necessary piece of equipment for any divers who would like to upgrade their rubber fin straps to more resistant straps. As a matter of fact, these fin straps are incredibly resistant and are made to reach the highest safety and quality standards. This pair of spring fin straps is designed with a stainless steel spring to ensure a high level of resistance in marine environments, and avoid any risks of breaking or tearing. The springs are protected by a rubber pad making these straps very comfortable to wear and very easy to place and remove from your booties. They are designed with a plastic buckle attachment which can easily and simply be fixed onto the designated knobs on either side of the fins. These spring fin straps are made for standard fin types and come in different sizes to fit all: small: 21 cm (8.2 inches) medium: 23.5 cm (9.25 inches) large: 26 cm (10.2 inches) and extra-large: 28 cm (11 inches). Price: US$ Price (inc tax): US$ /403

112 Name: Spring Fin Straps (Screw Type) Ref: Manufacturer: Aropec Size: M,Stock:3,Size: M,Size: M,Price: US$ Size: L,Stock:3,Size: L,Size: L,Price: US$ Size: XL,Stock:3,Size: XL,Size: XL,Price: US$ Size: S,Stock:3,Size: S,Size: S,Price: US$ This pair of spring fin straps is a necessary piece of equipment for any divers who would like to upgrade their rubber fin straps to more resistant straps. As a matter of fact, these fin straps are incredibly resistant and are made to reach the highest safety and quality standards. This pair of spring fin straps is designed with a stainless steel spring to ensure a high level of resistance in marine environments, and avoid any risks of breaking or tearing. The springs are protected by a rubber pad making these straps very comfortable to wear and very easy to place and remove from your booties. They are designed to attach to your fins with two stainless steel screws. These spring fin straps are made for standard fin types and come in different sizes to fit all: small: 21 cm (8.2 inches) medium: 23.5 cm (9.25 inches) large: 26 cm (10.2 inches) and extra-large: 28 cm (11 inches). Price: US$ Price (inc tax): US$ /403

113 Name: Rubber fin strap-t2 (Pair) Ref: Manufacturer: Aropec Stock: -5 These rubber fin straps are an absolute must in every save a dive kit, with a broken fin strap; your diving is done for the day! Keep a pair of spare straps in your bag, just in-case your buddy breaks his/her fin strap too! These fin straps fit most open heel fins (if they don`t we have an alternate design available), they are sold in pairs. Price: US$ 9.06 Price (inc tax): US$ /403

114 Name: Custom Camera Fluo Filter Ref: Manufacturer: Diving Solutions (Asia) LLP Fluo Diving is a growing interest to divers for a new experience in night diving, find out more about Fluo Diving at our site HERE. Our filters are custom made for us, by a optical specialist to give the best performance in Fluo Diving. While others, recommend using a standard Tiffen #12 filter; that do work. Our filters will produce the best colour contrast/brightness while filtering out the excessive blue light. These are custom made to measure Fluo (Amber) filter for you camera, the maximum size ix 50mm x 50mm. Filter includes an elasticated stra for fitting to your camera. Price: US$ Price (inc tax): US$ /403

115 Name: Custom Strobe Fluo Filter Ref: Manufacturer: Diving Solutions (Asia) LLP Fluo Diving is growing in popularity with night divers wanting a new experience, find out more about Fluo Diving at our site HERE. All our filters are made from a custom acrylic, manufactured by a optical specialist to give the best performance in Fluo Diving. This filter is a custom cut filter to fit your camera`s flash/strobe; weather its a compact camera or a professional strobe. This filter cut all light except for 460nm, producing a bright blue flash; perfect to get the best Fluo photo`s possible; especially when used together with our amber camera filters. This filter is 'made to measure' for you strobe; and includes an elasticaed strap for attachment. Maximum filter size is 10cm x 10cm. Price: US$ Price (inc tax): US$ /403

116 Name: Fluo Mask Filter Ref: Manufacturer: Diving Solutions (Asia) LLP This is a mask filter, to fit over a mask. It provides the same function as amber color filters we also produce, by cutting out the blue light and enhancing the Fluo effect. Find out more about Fluo diving on our website HERE. Cutting most of the blue light and showing the fluo effect, caution that using a fluo torch/mask filter you can not see non fluo objects, so use of a white light torch is critical. Price: US$ Price (inc tax): US$ /403

117 Name: DS Mini 350F - Head & Mask Filter Ref: Manufacturer: Diving Solutions (Asia) LLP Fluo diving is increasing in popularity among night divers, join the latest craze by just getting an additional head for your DS torch. This kit includes an amber mask filter, to learn more about Fluo diving visit our site HERE. Price: US$ Price (inc tax): US$ /403

118 Name: DS Mini 350F Ref: Manufacturer: Diving Solutions (Asia) LLP Accessories - Charger: NO Charger,Stock:10,Accessories - Charger: NO Charger,Accessories Charger: NO Charger,Price: US$ Accessories - Charger: Double Charger,Stock:10,Accessories - Charger: Double Charger,Accessories - Charger: Double Charger,Price: US$ Accessories - Charger: Single Charger,Stock:10,Accessories - Charger: Single Charger,Accessories - Charger: Single Charger,Price: US$ This DS Mini F350 torch is a Diving Solution brand torch that is designed to be used by divers while Fluo Diving. Fluo diving is a wonderful new way of conducting night dives which reveals the fluorescence of the marine life around you by using a special torch and filters on your mask or camera. This torch is of a very compact design making it practical to carry in a pocket and in one hand. It is made of aluminum that has been anodized coated therefore ensuring its resistance to corrosion and durability. Moreover, it is sealed by a double o-ring placed between the head and the body of the torch and is designed with an extra long thread to ensure maximum protection against flooding. This amazing torch has a battery life of 3 hours, a maximum depth of 200 m and produces a brightness of 53 lumens. It includes 2 Lithium ion batteries, 1 flue mask filter as well as 1 charger. DATASHEET DOWNLOAD Learn more about Fluo Diving HERE Price: US$ Price (inc tax): US$ /403

119 Name: Boltsnap Ref: Manufacturer: Aropec Size: Medium,Stock:8,Size: Medium,Size: Medium,Price: US$ Size: Large,Stock:10,Size: Large,Size: Large,Price: US$ Size: Small,Stock:1,Size: Small,Size: Small,Price: US$ 9.06 These stainless steel bolt snaps are salt water resistant making them perfect for divers. They are the essential accessories to divers for attaching and securing, extra equipment to their BCD, as well as extra tanks. They are constructed with a stainless steel spring making them strong and long-lasting in the marine environment. These bolt snaps are more reliable than other types of clips, yet they remain very easy to use. Available in different sizes, so you can find the perfect fit for your needs: 8.5 cm long (3,3 inches) in the smallest size 9 cm (3,5 inches) for a medium sized bolt with a medium D-ring and clip 12 cm (4,7 inches) long for a large bolt with a large clip and D-ring Both medium and large bolt snaps are also convenient to use with gloves. Price: US$ 9.06 Price (inc tax): US$ /403

120 Name: DS Mini 1000W Ref: Manufacturer: Diving Solutions (Asia) LLP Accessories - Charger: NO Charger,Stock:10,Accessories - Charger: NO Charger,Accessories Charger: NO Charger,Price: US$ Accessories - Charger: Double Charger,Stock:9,Accessories - Charger: Double Charger,Accessories - Charger: Double Charger,Price: US$ Accessories - Charger: Single Charger,Stock:8,Accessories - Charger: Single Charger,Accessories - Charger: Single Charger,Price: US$ This DS Mini W1000 torch is a Diving Solution brand torch and is the brightest of the range. It provides a powerful wide-angle beam, which makes it a great torch for diving in dark places and for close up underwater macro photography and video. It is also a fantastic product for recreational night diving. This torch is of a very compact design making it practical to carry in a pocket and in one hand. It is made of aluminum that has been anodized coated therefore ensuring its resistance to corrosion and durability. Moreover, it is sealed by a double o-ring placed between the head and the body of the torch and is designed with an extra long thread to ensure maximum protection against flooding. It has a battery life of 2 hours, a maximum depth of 200m, and produces a brightness of 1000 Lumens! It also comes with 2 Lithium batteries and 1 charger DATASHEET Download Price: US$ Price (inc tax): US$ /403

121 Name: Ikelite Olympus TG-5 Casing Ref: Manufacturer: Ikelite This underwater casing for the Olympus TG-5 camera offers a fully waterproof casing (max depth 60m/198ft). It features a 67mm (2.63 inches) lens port, giving you the ability to further improve the TG-5's macro capability or add a wide angle dome for underwater scenery shots. The casing features a side mounted shutter lever which makes taking pictures easier and more comfortable. Due to the effect of backscatter, the internal flash is covered, but can still be used to trigger an external flash using a fiber optic cable. This casing supports two ports allowing the camera to trigger two independent strobes if required. All the camera controls are accessible when inside the casing, offering maximum control of your camera. There is a 1/4-20 thread in the bottom of the casing to allow mounting onto tray systems or adding accessories. Price: US$ Price (inc tax): US$ /403

122 Name: Free Diving Fins Ref: Manufacturer: Aropec Size: L,Stock:1,Size: L,Size: L,Price: US$ Size: XL,Stock:1,Size: XL,Size: XL,Price: US$ Size: XXL,Stock:1,Size: XXL,Size: XXL,Price: US$ Size: M,Stock:1,Size: M,Size: M,Price: US$ Long blade freediving/spearfishing fins, featuring a softer more comfortable foot pocket for improved power transmission. The fins have changeable high-performance plastic long blades, with stiffer lateral sides. The fins feature a slightly concave shape from the foot to the blade, to help improve balance and power. Price: US$ Price (inc tax): US$ /403

123 Name: Garmin Descent Mk1 Ref: Manufacturer: Garmin he Garmin Descent Mk1 is the worlds first true smartwatch dive computer! Full-featured GPS smartwatch dive computer Single & MultiGas (up to 5 mixes) Air/Nitrox/Trimix capable Logs up to 200 dives Heart Rate Measurement Bluetooth & Wifi connectivity 3 Axis Compass, altimeter, GPS & GLONASS capability Rechargeable battery o Up to 12 days smartwatch mode + heart rate o Up to 40 hours dive mode o Up to 20 hours GPS mode + heart rate Price: US$ 1, Price (inc tax): US$ 1, /403

124 Name: Garmin Descent Mk1 Titanium Ref: Manufacturer: Garmin The Garmin Descent Mk1 is the worlds first true smartwatch dive computer! This model features a full titanium strap and bezel. Full-featured GPS smartwatch dive computer Single & MultiGas (up to 5 mixes) Air/Nitrox/Trimix capable Logs up to 200 dives Heart Rate Measurement Bluetooth & Wifi connectivity 3 Axis Compass, altimeter, GPS & GLONASS capability Rechargeable battery o Up to 12 days smartwatch mode + heart rate o Up to 40 hours dive mode o Up to 20 hours GPS mode + heart rate Price: US$ 2, Price (inc tax): US$ 2, /403

125 Name: Pressure Gauge Ref: Manufacturer: Aropec Stock: -3 55mm diameter gauge, featuring a pressure gauge (BAR). The pressure gauge has a maximum pressure of 400BAR, has a brass case to provide better shock resistance and lengthen its life. The console comes with a smooth HP hose of 80cm (31 inches), the hose diameter is 10mm (0.4 inches). The console conforms with CE EN250. Price: US$ Price (inc tax): US$ /403

126 Name: Twin Gauge Console Ref: Manufacturer: Aquatec Stock: -2 Twin gauge console, featuring a pressure gauge (BAR) and a depth gauge in (meters). The pressure gauge has a maximum pressure of 400BAR, has a brass case to provide better shock resistance and lengthen its life. The depth gauge can display depths down to 70m, and they both have cover glass rated to 200m (600ft). The console comes with a smooth HP hose of 80cm (31 inches), the hose diameter is 10mm (0.4 inches). The console conforms with CE EN250. Price: US$ Price (inc tax): US$ /403

127 Name: Pressure Gauge (Brass) [Aquatec] Ref: Manufacturer: Aquatec Stock: -3 Brass pressure gauge in TPR rubber boot with an 81cm (32 inches) rubber hose, The gauge features a bright phosphorescent face for easy readability in any condition. This gauge displays BAR, up to a maximum of 350 BAR. Price: US$ Price (inc tax): US$ /403

128 Name: Pressure Gauge Only (Brass) [Aquatec] Ref: Manufacturer: Aquatec Stock: -1 The Aquatec PG-450M is a Brass pressure gauge, module only; it does not come supplied with a rubber boot. The gauge features a Phosphorescent face and reads pressures up to 350Bar (5000PSI). The gauge diameter is 54mm (2.13 inches). Price: US$ Price (inc tax): US$ /403

129 Name: Fin Key Chain Ref: Manufacturer: Diving Solutions (Asia) LLP The perfect gift for the diver who has everything! Show off the fact that you are a diver, with this 'Jetfin' styled keychain. Made from black rubber, with the Diving Solutions logo molded into it in red and grey. Price: US$ 4.53 Price (inc tax): US$ /403

130 Name: USB Fin Thumbdrive (8Gb) Ref: Manufacturer: Diving Solutions (Asia) LLP The ideal gift for any scuba diver, a 'Jet Fin' styled USB thumb drive. Capacity 8Gb, with an embossed Diving Solutions logo. Molded in black rubber with Diving Solutions logo molded into it in red/grey. Price: US$ Price (inc tax): US$ /403

131 Name: Fingerless Gloves Ref: Manufacturer: Aropec Size: S,Stock:5,Size: S,Size: S,Price: US$ Size: M,Stock:5,Size: M,Size: M,Price: US$ Size: L,Stock:5,Size: L,Size: L,Price: US$ Size: XL,Stock:5,Size: XL,Size: XL,Price: US$ Size: XXL,Stock:5,Size: XXL,Size: XXL,Price: US$ Size: XS,Stock:5,Size: XS,Size: XS,Price: US$ These neoprene fingerless gloves are the perfect lightweight pieces of equipment for divers. These gloves will offer impeccable hand protection while permitting the diver to retain full control of movement. They are made of 2 mm thick neoprene making them ideal for warm water diving. They are designed with a Velcro strap enabling you to adjust the fit for better comfort, and a leatherette patch across the palm to ensure better resistance against abrasion. These gloves will provide you with the ideal thermal protection making your dives more enjoyable and will prevent any cuts and scratches when diving on wrecks, or handling diving and boat equipment. Their fingerless attribute makes them the perfect tool for divers who do not want to give away the full dexterity of their fingers for the protection of their hands and will permit them to use cameras, diving, and boat equipment with full deftness. Price: US$ Price (inc tax): US$ /403

132 Name: IST Tropical Gloves Ref: Manufacturer: IST Sports Size: S,Stock:1,Size: S,Size: S,Price: US$ Size: M,Stock:11,Size: M,Size: M,Price: US$ Size: L,Stock:6,Size: L,Size: L,Price: US$ Size: XL,Stock:14,Size: XL,Size: XL,Price: US$ Size: XS,Stock:6,Size: XS,Size: XS,Price: US$ This pair of diving gloves is an essential lightweight piece of equipment for any water sports activities such as scuba diving, free diving, or snorkeling. They are made of a 2mm thick neoprene, which makes them perfect for warm water temperatures. Manufactured by IST, you can be confident you are receiving a high-quality product engineered by a company with more than 30 years of experience. The palms of the gloves are designed with Amara material, which has enabled IST to create these extremely flexible and thin gloves while retaining the utmost strength. This revolutionary material ensures the gloves durability and maximizes hand protection against cuts and scratches. These high-quality gloves are also designed with an adjustable Velcro strap enabling you to adjust their tightness around your hands and maximize your comfort. They are available in five different sizes from small to extra-large, therefore, ensuring you are able to find the perfect fit for your hands. Price: US$ Price (inc tax): US$ /403

133 Name: 50mm Polyester Webbing Ref: Manufacturer: Aropec This webbing is softer and more flexible than the standard webbing used for harnesses & weight belts. It is perfect to make extra comfortable crotch straps, etc; but note that normal tri-sliders will not hold firm on this webbing. Sold by the meter Price: US$ 2.27 Price (inc tax): US$ /403

134 Name: 50mm Nylon Webbing Ref: Manufacturer: Aropec Color: Black,Stock:93,Color: Black,Color: Black,Price: US$ 3.40 Color: Yellow,Stock:40,Color: Yellow,Color: Yellow,Price: US$ 3.40 Color: Blue,Stock:0,Color: Blue,Color: Blue,Price: US$ 3.40 This Nylon webbing is a great piece of equipment for all divers. Commonly used for weight belts or for harnesses, this strong Nylon webbing is perfect for replacing your worn out weight belt or for those of you building their own BCD. This webbing is made of super-resistant material perfect for supporting heavy gear in salt-water environments. This webbing is 2,57mm thick (0.07 inch) making it stiffer and of superior quality compared to other types of webbing, therefore ensuring its resistance to tears and harsh environments making it more reliable and providing a longer lasting lifespan. It comes in three different colors, blue, yellow and black, to allow you to fit it to your tastes and equipment perfectly. This strong Nylon webbing is also sold by the meter to ensure you get the perfect fit for your needs and the best value. Price: US$ 3.40 Price (inc tax): US$ /403

135 Name: Double Ended Snap Bolt Ref: Manufacturer: Aropec This stainless steel double-ended bolt snap is the perfect essential accessory to divers for attaching and securing extra equipment to their BCD, such as SMBs, reels, and torches. It is made of stainless steel, making it more resistant than other materials to saltwater environments, therefore making it the perfect tool for divers. It measures 12 cm (4.75 inches) long and is designed with two clips at each end with spring-loaded gates allowing you to easily attach or detach equipment. The double-ended feature adds extra safety in case one clip is not easily reachable. Each clip is about 3 cm long (1.18 inches) making them the ideal size clip all sorts of diving equipment of small or larger sizes. This double-ended bolt snap is a must for any serious divers and will allow you freedom of movement, as it is designed to free your hands from holding equipment. Price: US$ Price (inc tax): US$ /403

136 Name: D-Ring Loop (Pair) Ref: Manufacturer: Diving Solutions (Asia) LLP This D-ring loop pair is the perfect multi-use accessory for adding versatility and flexibility to your dive gear. This pair of D-rings is designed with webbing loops enabling them to be threaded onto almost any piece of gear that has a strap. For example, by threading a D-ring onto your weight belt you are then able to attach additional accessories such as a torch or a noisemaker to it. Moreover, the loop configuration enables the D-rings to be easily slid around the strapping on a harness making them perfect for improving trim while side-mount diving. This pair of D-ring loops are made from stainless steel and nylon webbing providing durability, a long life-span and, most importantly, improving your safety. With a width of 5cm (2 inches) this pair of D-ring loops is a highly flexible and practical, yet compact and lightweight addition to your dive gear. Price: US$ Price (inc tax): US$ /403

137 Name: Plastic Weightbelt Buckle Ref: Manufacturer: Aropec Color: Black,Stock:4,Color: Black,Color: Black,Price: US$ 9.06 Color: Yellow,Stock:4,Color: Yellow,Color: Yellow,Price: US$ 9.06 Color: Green,Stock:5,Color: Green,Color: Green,Price: US$ 9.06 Color: Blue,Stock:4,Color: Blue,Color: Blue,Price: US$ 9.06 Plastic weight belt buckles are a good alternative to stainless steel, lighter weight and more maintenace free (read "less rust"). They are suitable for weight belts or harness buckles. Price: US$ 9.06 Price (inc tax): US$ /403

138 Name: Quick Link Ref: Manufacturer: Other Size: 5mm,Stock:5,Size: 5mm,Size: 5mm,Price: US$ 6.80 Size: 4mm,Stock:5,Size: 4mm,Size: 4mm,Price: US$ 6.23 Quick links are a great way to attach things to your harness/bcd in a way that cannot come off. With the screw down nut, accidental removal is eliminated and they are strong enough to support considerable weight. We use them as part of our method for attaching Side Mount tanks to our harness. Price: US$ 6.23 Price (inc tax): US$ /403

139 Name: Sex Bolts - Stainless Steel (Pair) Ref: Manufacturer: Aropec The neatest and 'sexist' way to attach your bladder to your backplate/harness. These bolts have a super flat head so they do not protrude into your back when fitted, and give a more professional look. Price: US$ Price (inc tax): US$ /403

140 Name: SS Weight Keeper with D-ring Ref: Manufacturer: Aropec This SS weight keeper is the perfect accessory for recreational and professional divers. This weight keeper is made of stainless steel ensuring resistance to corrosion, and offering a longer lasting lifespan. It is designed with a serrated slider to enable you to secure your weights on your weight belt and your D-rings on webbing, thus avoiding any risk of them moving, or dropping while diving or during transport. Moreover, this weight keeper is constructed with a welded D-ring so you can attach any extra accessory to it such as a torch, a writing slate, or a tank banger for example. It has a width of 5 cm (2 inches) making it versatile and able to fit most belts and straps. This is also the perfect solution for technical divers using sidemount harnesses for example. Price: US$ Price (inc tax): US$ /403

141 Name: Stainless Steel D-ring Ref: Manufacturer: Aropec Size: 1 Inch,Stock:16,Size: 1 Inch,Size: 1 Inch,Price: US$ 1.70 Size: 2 Inch,Stock:15,Size: 2 Inch,Size: 2 Inch,Price: US$ 3.40 These stainless steel d-rings, are available in two sizes to fit the appropriate webbing width. They are available as either 50mm wide (2 inches) or 25mm wide (1 inch). A D-ring is a basis for attaching almost all equipment/accessories to your BCD/harness when diving. Remember you need a slider or weight keeper to attach a D-Ring to webbing correctly. Price: US$ 3.40 Price (inc tax): US$ /403

142 Name: Stainless Steel Tri-Slider Ref: Manufacturer: Aropec Size: 1 Inch,Stock:18,Size: 1 Inch,Size: 1 Inch,Price: US$ 1.70 Size: 2 Inch,Stock:11,Size: 2 Inch,Size: 2 Inch,Price: US$ 3.40 These stainless steel tri-sliders are for use with our D-rings, webbing, etc. The hold the webbing and D-ring in place, but for extra strength go for the separate sliders. These sliders are available for 50mm (2 inches) wide and 25mm (1 inch) wide nylon webbing. Note: If you use these sliders on polyester webbing you may find they will slip. Price: US$ 3.40 Price (inc tax): US$ /403

143 Name: Weightbelt Buckle - Stainless Steel Ref: Manufacturer: Other A weight belt buckle is an essential component of your diving equipment to ensure safe and comfortable diving. A weight belt buckle is designed to be threaded and secured onto your weight belt and allow you to slide your weight belt into the buckle, adjust it to fit your size and fasten it safely to ensure it doesn t come undone during the dive. This great weight belt buckle is made of stainless steel, therefore making it ultra resistant to heavy weights and to corrosion caused in saltwater environments. It is designed to have a very easy use as it has three openings into which the weight belt can be slid and secured. To ensure maximum safety and practicality, the weight belt buckle is simply opened and closed by pulling or pushing the metal flap. This weight belt buckle is designed for 50mm (2 inches) webbing for a super resistant and long lasting weight belt. Price: US$ Price (inc tax): US$ /403

144 Name: DS350/1000 Mini Snap Bolt Kit Ref: Manufacturer: Diving Solutions (Asia) LLP Our DS range of torches was custom made to fit this stainless steel shackle, so you can safely clip the torch to your harness without the worry of loosing it. This kit includes a small boltsnap and shackle. Price: US$ Price (inc tax): US$ /403

145 Name: Plastic Weight Keeper Ref: Manufacturer: Aropec Color: Pink,Stock:28,Color: Pink,Color: Pink,Price: US$ 3.40 Color: Yellow,Stock:24,Color: Yellow,Color: Yellow,Price: US$ 3.40 Color: Blue,Stock:13,Color: Blue,Color: Blue,Price: US$ 3.40 These are colorful plastic weight keepers, designed to be used to secure weights onto a weight belt to avoid the dropping off etc. They can also be used to secure other items on a belt or harness to stop items from slipping. Price: US$ 3.40 Price (inc tax): US$ /403

146 Name: Delrin Thumbwheel Nuts (Pair) Ref: Manufacturer: Diving Solutions (Asia) LLP Tired of hurting your hands constantly removing the bolts from your backplate/bladder? Switch to these thumb wheels, manufactured from solid Delrin with a 5/16" thread to suit the back plate bolts. They make attaching your bladder so much easier and rust free too! Sold in pairs. Price: US$ Price (inc tax): US$ /403

147 Name: Karabiner-Stainless Steel Ref: Manufacturer: Aropec Length: 7mm,Stock:45,Length: 7mm,Length: 7mm,Price: US$ 6.23 Length: 6mm,Stock:49,Length: 6mm,Length: 6mm,Price: US$ 5.67 An alternative to using bolt snaps, clip anything to your BCD, camera`s, torches, knives, etc. Simply push the gate inward to open reduces the chance of accidentally opening. Fully stainless steel construction (including the spring!). Price: US$ 5.67 Price (inc tax): US$ /403

148 Name: Webbing Buckle Ref: Manufacturer: Other Size: 1 Inch,Stock:14,Size: 1 Inch,Size: 1 Inch,Price: US$ 2.27 Size: 2 Inch,Stock:32,Size: 2 Inch,Size: 2 Inch,Price: US$ 4.53 Heavy-duty, 50mm (2 inches) webbing buckles; perfect for the DIY`er making their own harness or someone wanting to make their harness more adjustable or easier to don/doff. Price: US$ 4.53 Price (inc tax): US$ /403

149 Name: SS Weight Keeper Ref: Manufacturer: Aropec This SS weight keeper is the perfect accessory for recreational and professional divers. This weight keeper is made of stainless steel ensuring resistance to corrosion and enables you to secure your weights on your weight belt and your D-rings on webbing, thus avoiding the risks of them moving or dropping. Price: US$ 4.53 Price (inc tax): US$ /403

150 Name: Plastic Slider Ref: Manufacturer: Other Size: 1 Inch,Stock:8,Size: 1 Inch,Size: 1 Inch,Price: US$ 2.27 Size: 2 Inch,Stock:3,Size: 2 Inch,Size: 2 Inch,Price: US$ 2.27 These plastic sliders can be used to hold pouches in position or loose ends of webbing, or for use with the plastic D-rings. Note they are not suitable for supporting heavy loads as they will slip! Price: US$ 2.27 Price (inc tax): US$ /403

151 Name: SS Back Plate Bolts (Pair) Ref: Manufacturer: Diving Solutions (Asia) LLP These backplate bolts allow for easy attachment of back plate to twin tank assembly, or a single tank adaptor/harness system. The wing nut allows for easy tightening without tools. The bolt fits through the backplate system, then the flat washer and spring washer should be placed against the back plate; finally the wing nut screws down tightly to secure everything. Price: US$ Price (inc tax): US$ /403

152 Name: Stainless Steel Split Ring Ref: Manufacturer: Other This split ring is made from 2.5mm (0.1 inches) Stainless Steel wire and has a ring diameter of 25mm (1.0 inch). It is ideal for attaching all kinds of accessories to karabiners, bolt snaps, etc; items cannot easily drop off the split ring. Price: US$ 1.70 Price (inc tax): US$ /403

153 Name: Butt Slider Ref: Manufacturer: Diving Solutions (Asia) LLP A stainless steel butt slider, made to fit 50mm (2 inches) webbing with two 40mm (1.57 inches) rings. The butt slider is made to fit onto the back of your crotch strap for attaching side mount or stage tanks. It provides a fixed, low profile alternative to d-rings and sliders. Price: US$ Price (inc tax): US$ /403

154 Name: Slider with Ring Ref: Manufacturer: Diving Solutions (Asia) LLP This stainless steel slider has an integrated ring; to provide a low profile attachment method. The slider fits webbing of 50mm (2 inches) wide, and the ring size is 17mm (0.67 inches) wide and 32mm (1.25 inches) high. Price: US$ 5.67 Price (inc tax): US$ /403

155 Name: Stainless Steel Shackle Ref: Manufacturer: Other Size: M,Stock:6,Size: M,Size: M,Price: US$ 2.84 Size: S,Stock:1,Size: S,Size: S,Price: US$ 2.84 Stainless steel shackle, great as a rugged and flexible way of attaching bolt snaps, spilt rings, etc to your accessories. Medium size is designed to fit the end of our DS Mini torch range. Price: US$ 2.84 Price (inc tax): US$ /403

156 Name: Weight Belt (SS Buckle) Ref: Manufacturer: Diving Solutions (Asia) LLP Length: 1.5m,Stock:1,Length: 1.5m,Length: 1.5m,Price: US$ Length: 2m,Stock:2,Length: 2m,Length: 2m,Price: US$ Length: 2.5m,Stock:2,Length: 2.5m,Length: 2.5m,Price: US$ Length: 1m,Stock:2,Length: 1m,Length: 1m,Price: US$ This is an assembled weight belt with stainless steel buckle and black nylon webbing, please select the length you need and allow a little extra length for the belt to thread through the weights. Price: US$ Price (inc tax): US$ /403

157 Name: Karabiner-Plastic Ref: Manufacturer: Other Color: Orange,Stock:44,Color: Orange,Color: Orange,Price: US$ 1.70 Color: Black,Stock:47,Color: Black,Color: Black,Price: US$ 1.70 Color: Green,Stock:50,Color: Green,Color: Green,Price: US$ 1.70 Plastic karabiner, ideal for attaching accessories to bags, etc. The karabiners are made from POM / Stainless Steel, length is 8.5cm (3.4 inches), width 5.6cm (2.2 inches) and 0.7cm (0.3inches) thick. They have a maximum load of 90Kg (200 lbs) - NOT SUITABLE FOR CLIMBING! Price: US$ 1.70 Price (inc tax): US$ /403

158 Name: S-Clip - Plastic Ref: Manufacturer: Other Color: Black,Stock:0,Color: Black,Color: Black,Price: US$ 1.14 Color: Dark Green,Stock:0,Color: Dark Green,Color: Dark Green,Price: US$ 1.14 Color: Orange,Stock:0,Color: Orange,Color: Orange,Price: US$ 1.14 This S-Clip is ideal for attaching accessories to bags, key chains, etc. The S-Clip is made from POM with two steel springs. The length of the clip is 5cm (1.97 inches), width is 2.4cm (0.94 inches), and a 0.5cm (0.2 inches) thickness. NOTE: This item is NOT stainless steel Price: US$ 1.14 Price (inc tax): US$ /403

159 Name: Mini Over Pressure Valve (OPV) Complete Ref: Manufacturer: Aquatec A miniature, half the size of a standard BCD overpressure valve. This OPV is only 25mm (1 inch) and is suitable for use on an SMB as an over inflation device. The OPV features all parts necessary to fit this into your own item. Price: US$ Price (inc tax): US$ /403

160 Name: Plastic D-Ring Ref: Manufacturer: Other Size: 1 Inch,Stock:18,Size: 1 Inch,Size: 1 Inch,Price: US$ 1.14 Size: 2 Inch,Stock:16,Size: 2 Inch,Size: 2 Inch,Price: US$ 2.27 These plastic D-Rings are available in two sizes, 50mm (2 inches) and 25mm (1 inch). They provide a rust-free, lightweight option to stainless steel d-rings, for use on lighter loads (i.e. accessories such as camera`s). They should be used together with plastic sliders or keepers. Price: US$ 2.27 Price (inc tax): US$ /403

161 Name: 25mm Webbing (Black) Ref: Manufacturer: Diving Solutions (Asia) LLP The nylon webbing is 25mm (1 inch) wide and flexible enough to make a comfortable crotch strap for harnesses. Or for a should strap for bags/accessories, add it with our range of 25mm (1 inch) items, like buckles, sliders, and D-rings. Price: US$ 1.14 Price (inc tax): US$ /403

162 Name: Weightbelt Buckle-Stainless Steel [Aquatec] Ref: Manufacturer: Aquatec Having your own weight belt is a benefit, as you can ensure it fits correctly, all weight belts need a buckle. A weight belt buckle is designed to be threaded and secured onto your weight belt and allow you to slide your weight belt into the buckle, adjust it to fit your size and fasten it safely to ensure it doesn t come undone during the dive. This great weight belt buckle is made of stainless steel, therefore making it ultra resistant to heavy weights and to corrosion caused in saltwater environments. It is designed to have a very easy use as it has three openings into which the weight belt can be slid and secured. To ensure maximum safety and practicality, the weight belt buckle is simply opened and closed by pulling or pushing the metal flap. This weight belt buckle is designed for 50mm (2 inches) webbing for a super resistant and long lasting weight belt. Price: US$ Price (inc tax): US$ /403

163 Name: Moldable Mouth Piece Ref: Manufacturer: Diving Solutions (Asia) LLP Color: Pink,Stock:148,Color: Pink,Color: Pink,Price: US$ Color: Black,Stock:0,Color: Black,Color: Black,Price: US$ Color: Yellow,Stock:125,Color: Yellow,Color: Yellow,Price: US$ Color: Clear,Stock:151,Color: Clear,Color: Clear,Price: US$ Color: Blue,Stock:59,Color: Blue,Color: Blue,Price: US$ This moldable mouthpiece is an essential part of your diving equipment! This moldable mouthpiece is designed to be fitted on your second stage regulator and/or your alternate air source regulator. This moldable mouthpiece enables you to keep hold of your regulator while diving without straining your jaw, as it is created to fit exactly to the shape of your mouth and jaw. This wonderful device will help prevent jaw pain, strain which can create headaches and longer lasting issues and ensure you get a mouthpiece made only for you. It is easily molded at home in warm water, and can be remolded several times if necessary. It also comes with a small adjustable cable tie to easily secure your mouthpiece onto your regulator. Moreover, this mouthpiece is made of silicon rubber material, therefore ensuring a comfortable and smooth fit in your mouth. Fitting all tastes, this piece of equipment comes in different colors, blue, pink, black, yellow and transparent, so you can customize your regulator. See HERE for molding/fitting instructions Price: US$ Price (inc tax): US$ /403

164 Name: Lycra Cap Ref: Manufacturer: Aropec Color: Grey,Stock:1,Color: Grey,Color: Grey,Price: US$ Color: Black,Stock:1,Color: Black,Color: Black,Price: US$ The Aropec Lycra cap is suitable for swimming, scuba diving, keep the sun off your head or to wear under a motorcycle helmet. For scuba diving its a great for keeping your hair out of your mask, without causing the buoyancy problems of a hood. Price: US$ Price (inc tax): US$ /403

165 Name: 1.5mm Hood Ref: Manufacturer: Aropec Size: M,Stock:9,Size: M,Size: M,Price: US$ Size: L,Stock:9,Size: L,Size: L,Price: US$ Size: S,Stock:9,Size: S,Size: S,Price: US$ mm neoprene hood, help to reduce body heat loss. And reduce scratches and abrasions to your head and face. as well as helping to control long hair. Price: US$ Price (inc tax): US$ /403

166 Name: Double Lithium Ion Charger Ref: Manufacturer: Other This double cell Lithium Ion charger is an essential accessory for those needing to charge batteries from our LED torch range but are short on packing space. This charger is compact, lightweight and very easy to carry while providing you with the convenience of being able to charge 2 batteries at once, making it the perfect travel charger for any device using Lithium Ion, cells! Moreover, the charger will never over charge the batteries, as it will switch over to trickle charging as the cells becomes full extending the life and use of your batteries. It is made of a matt black plastic material making the device tough and durable so it can easily survive a life on the road in amongst your baggage and diving equipment. With an operating voltage range of 110v to 240v, this charger is perfectly suited for worldwide use making it the perfect travel or backup charger that you can take anywhere. Price: US$ Price (inc tax): US$ /403

167 Name: Lithium Ion Charger Ref: Manufacturer: Other This single cell Lithium Ion charger is an essential accessory for those needing to charge batteries from our LED torch range but are short on packing space. This charger is compact, lightweight and very easy to carry making it the perfect travel charger for any device using a Lithium Ion, cell! Moreover, the charger will never over charge the battery, as it will switch over to trickle charging as the cell becomes full, extending the life and use of your battery. It is made of a matt black plastic material making the device tough and durable, so it can easily survive a life on the road in amongst your baggage and diving equipment. With an operating voltage range of 110v to 240v, this charger is perfectly suited for worldwide use making it the perfect travel or backup charger that you can take anywhere. Price: US$ Price (inc tax): US$ /403

168 Name: LR44 battery (x3) Ref: Manufacturer: Other Lithium button cells (LR44), sold in packs of 3. Suitable for remotes, small lights, etc Price: US$ 4.53 Price (inc tax): US$ /403

169 Name: DS350/1000 Main O-Rings Ref: Manufacturer: Diving Solutions (Asia) LLP Carry some spare o-ring for your Diving Solutions torch, is important... Having a split o-ring on a dive trip, and without any spares could mean missing that awesome night dive...or worse still flooding the torch. Always remember to apply a thin layer of silicon grease when fitting and using o-rings. Sold in pairs. Price: US$ 1.14 Price (inc tax): US$ /403

170 Name: Li-Ion Battery (Protected) Ref: Manufacturer: Other These Lithium Ion batteries fit our current model of DS torches, we recommend using the battery with protection circuit. Always remember to use a suitable charger with a Lithium Ion Battery and never short circuit them; to get the best life from them recharge them when they are about 50% used. Price: US$ 6.23 Price (inc tax): US$ /403

171 Name: Torch Hand Mount Ref: Manufacturer: Diving Solutions (Asia) LLP This torch hand mount is a great device to add to your dive equipment! This torch hand mount will allow you to dive freely and comfortably without having to get your torch in and out of your BCD pocket. It is made of black woven Nylon to ensure resistance to saltwater environments and prevent it from tearing. It is designed to easily slide onto your hand with a bungee strap that is placed on your wrist and a wide comfortable Nylon patch positioned on the back of your hand. The patch is designed with a Velcro mechanism so you can close it on the palm of your hand, and adjust it to the right fit. This torch hand mount will allow you to dive hands free and therefore enjoy a more streamlined and safer dive. This great device is suitable for small hand torch such as Diving Solution s DS350/1000 range. Price: US$ Price (inc tax): US$ /403

172 Name: Quad Lithium Ion Charger Ref: Manufacturer: Other This quad cell Lithium Ion charger is an essential accessory for those needing to charge multiple batteries from our LED torch range but are short on charging time. This charger is compact, lightweight and very easy to carry while providing you with the convenience of being able to charge 4 batteries at once, making it the perfect travel charger for any device using Lithium Ion, cells! Moreover, the charger will never over charge the batteries, as it will switch over to trickle charging as the cells becomes full extending the life and use of your batteries. It is made of a matt cream plastic material making the device tough and durable so it can easily survive a life on the road in amongst your baggage and diving equipment. With an operating voltage range of 110v to 240v, this charger is perfectly suited for worldwide use making it the perfect travel or backup charger that you can take anywhere. Price: US$ Price (inc tax): US$ /403

173 Name: DS Mini P-Clip Ref: Manufacturer: Diving Solutions (Asia) LLP Delrin P-Clip designed to hold a DS Mini LED torch. Hole suitable for M5 screw. Price: US$ 5.67 Price (inc tax): US$ /403

174 Name: DS Mini - Body ONLY Ref: Manufacturer: Diving Solutions (Asia) LLP Spare/replacement main body for Diving Solutions Mini LED torch Price: US$ Price (inc tax): US$ /403

175 Name: GoPro Adapter Ref: Manufacturer: Diving Solutions (Asia) LLP Adapter for fitting DS Mini torch to GoPro accessories. Price: US$ 5.67 Price (inc tax): US$ /403

176 Name: Headmounted Light [Aquatec] Ref: Manufacturer: Aquatec This is a compact size LED torch for use on your mask, to illuminate instruments, etc. The torch features a push button switch on the back and is supplied with a stainless steel clip for attaching to your mask strap. It is constructed from Aluminium and matte black anodizing, the torch has a narrow red beam with a brightness of 200 Lumens (and is supplied with a red filter, to avoid blinding divers). The torch functions on a single Alkaline AAA battery and lasts about 3 hours (following NEMA FL-1 standards); depth rated to 150m. Price: US$ Price (inc tax): US$ /403

177 Name: Silicon Mask Strap Ref: Manufacturer: Aropec Color: Clear,Stock:9,Color: Clear,Color: Clear,Price: US$ Color: Black,Stock:10,Color: Black,Color: Black,Price: US$ Soft silicon replacement mask strap, will fit most scuba diving masks; features a broad pad area for increased comfort. REMEBER, carrying a spare mask strap with you on a dive trip is a good thing, and could avoid you loosing your mask! Our mask straps are made from soft silicon for comfort and feature a wide pad area on the back of your head. Price: US$ Price (inc tax): US$ /403

178 Name: Silicone Snorkel Holder Ref: Manufacturer: Aropec Color: Clear,Stock:49,Color: Clear,Color: Clear,Price: US$ 2.27 Color: Black,Stock:49,Color: Black,Color: Black,Price: US$ 2.27 This silicon snorkel holder is a great addition to your save-a-dive kit or to use everyday on your snorkel. A snorkel holder is an important component of your dive and snorkeling equipment as it ensures your snorkel is safely and comfortably secured to your mask strap during a dive or a snorkel. This snorkel holder is made of silicon, therefore ensuring maximum resistance to wear and tear and allows a very easy use. It is a small device that fits onto any snorkel shape by easily and simply sliding the snorkel into one of the two loops, then securing it to the mask strap before sliding the second loop onto the snorkel again. It is of a very small and light design making it extremely portable and easy to carry in an equipment spares box for example. It comes in both black color and transparent to fit your taste and diving equipment. Price: US$ 2.27 Price (inc tax): US$ /403

179 Name: Anti-Fog Spray Ref: Manufacturer: Aropec Stock: -13 Using your own spit can be gross or offensive to some people, so use the proper product. Use a specialized mask anti-fog solutions! This anti-fog comes in a bottle of 30ml, so can be hand-carried on flights without any issue. Please follow directions for use. Price: US$ 6.80 Price (inc tax): US$ /403

180 Name: Snorkel Clip - Plastic Ref: Manufacturer: Aropec Color: Clear,Stock:99,Color: Clear,Color: Clear,Price: US$ 4.53 Color: Black,Stock:75,Color: Black,Color: Black,Price: US$ 4.53 This plastic snorkel clip is the perfect addition to your dive and snorkel equipment. This snorkel clip will ensure your snorkel stays secure and well adjusted to your mask while snorkeling or diving. It is made of plastic material therefore providing resistance to saltwater environments and prolonged use, as well as easy portability. Simply slide your snorkel into the round shaped holder and clip it onto your mask strap. This snorkel holder is designed with a very easy to use press clip mechanism that you can open to insert your mask strap in and then clip shut to ensure your mask strap stays secure. The diameter of this snorkel holder is 25mm (1 inch) and is only suitable for round snorkels. It comes in two versions, black or transparent to fit your tastes and your equipment. Price: US$ 4.53 Price (inc tax): US$ /403

181 Name: Full Face Snorkeling Mask Ref: Manufacturer: Diving Solutions (Asia) LLP A full-face snorkeling mask is a wonderful piece of equipment for snorkeling. A full-face mask is a great option for snorkeling excursions and allows you to get the best sight of the underwater marine life! This full-face mask is customized by and designed for Diving Solution only, therefore ensuring you of the best quality and value. This mask has an integrated snorkel built in on top of the mask and is designed with a shatterproof polycarbonate lens to ensure maximum safety and conduction of light. Moreover, it enables you to see up to 180 degrees underwater thus giving you the best underwater vision possible. This full-face mask allows you to breath through both your nose and mouth for better comfort as well as allowing you to talk. Moreover, it is designed with an anti-fog mechanism to ensure your snorkeling excursion never gets disturbed by a foggy and blurry lens. Price: US$ Price (inc tax): US$ /403

182 Name: Aquatec Frameless Mask Ref: Manufacturer: Aquatec Stock: -6 Price: US$ Price (inc tax): US$ /403

183 Name: Aquatec Single Lens Mask Ref: Manufacturer: Aquatec Color: Black,Stock:8,Color: Black,Color: Black,Price: US$ Color: Blue,Stock:4,Color: Blue,Color: Blue,Price: US$ Price: US$ Price (inc tax): US$ /403

184 Name: Mares One Vision Mask Ref: Manufacturer: Mares The One Vision mask from Mares is a benchmark for dive masks, featuring a single lens and Mares easy adjust buckles. Low volume, light weight and durable. Price: US$ Price (inc tax): US$ /403

185 Name: Mares X-Vision Ultra LS Ref: Manufacturer: Mares Color: Black/Red,Stock:1,Color: Black/Red,Color: Black/Red,Price: US$ Color: Black/Black,Stock:1,Color: Black/Black,Color: Black/Black,Price: US$ Color: Black/Yellow,Stock:4,Color: Black/Yellow,Color: Black/Yellow,Price: US$ Color: Clear/Yellow,Stock:1,Color: Clear/Yellow,Color: Clear/Yellow,Price: US$ Color: White/Pink,Stock:2,Color: White/Pink,Color: White/Pink,Price: US$ Color: White/Blue,Stock:1,Color: White/Blue,Color: White/Blue,Price: US$ Stylish diving mask from Mares, featuring the legendary Mares Liquid Skin skirt for super comfort and fit. New Bi-silicone skirt contoured for enhanced fit and comfort Hydrodynamic design - Makes you look good :-) Small ribs around nose to relieve pressure 20% increase in field of vision of previous version X-shaped bi-silicone strap for bet fit and comfort Price: US$ Price (inc tax): US$ /403

186 Name: Mares X-Vision Ultra LS Ref: Manufacturer: Mares Stylish diving mask from Mares, featuring the legendary Mares Liquid Skin skirt for super comfort and fit. New Bi-silicone skirt contoured for enhanced fit and comfort Hydrodynamic design - Makes you look good :-) Small ribs around nose to relieve pressure 20% increase in field of vision of previous version X-shaped bi-silicone strap for bet fit and comfort Price: US$ Price (inc tax): US$ /403

187 Name: Childrens Mask Ref: Manufacturer: Other This children size scuba mask is an essential piece of dive gear for scuba diving or snorkeling kids. The frame design combined with the tempered, ultra clear lenses provide durability while also allowing maximum light transmission and therefore increasing your underwater view. The adjustable buckles are joined directly to the mask frame to improve comfort while also increasing durability to ensure a long lifespan. The buckles have a simple pinch release to allow the mask strap to be loosened and tightened to ensure a comfortable and watertight fit. As a result, the mask gives a perfect fit to a wide ranges of face making them perfect for children aquatic eye protection. As well as being comfortable, durable and watertight, this mask is also beautifully designed with fun and colourful animals such as elephants and rabbits. The mask is the best solution for children ready to experience the aquatic world. Price: US$ Price (inc tax): US$ /403

188 Name: Neoprene Mask Pad Ref: Manufacturer: Aropec Color: Pink,Stock:0,Color: Pink,Color: Pink,Price: US$ 9.06 Color: Yellow,Stock:5,Color: Yellow,Color: Yellow,Price: US$ 9.06 Color: Blue,Stock:3,Color: Blue,Color: Blue,Price: US$ mm thick, neoprene mask pad. Fitting this on your mask strap will add comfort and increase ease of fitting as the pad will no stick to your hair. The pad also helps, should you drop your mask, by making it slightly more buoyant so it will slowly sink. The pads fit well with our replacement mask straps. Price: US$ 9.06 Price (inc tax): US$ /403

189 Name: Free Diving Low Volume Mask Ref: Manufacturer: Aropec This is a very low volume mask, offering good visibility and easy clearing; making it ideal for a Free Diver or a scuba diver. The mask has two tempered glass lenses, with a soft black silicone skirt for good sealing. It features quick adjust buckles on each side and a comfortable silicone strap. Price: US$ Price (inc tax): US$ /403

190 Name: Aquaseal Wetsuit Glue Ref: Manufacturer: McNett Holes in wetsuits or drysuits are a pain, and can cost a lot to repair; spotting small holes early and patching them yourself is simple with this urethane adhesive. Great to keep in your toolkit at home, in case of any tears, holes or rips in your suits; or better still put one in your 'Save-A-Dive' kit for onsite repairs. Price: US$ Price (inc tax): US$ /403

191 Name: Wrist Compass Ref: Manufacturer: Aropec Stock: -7 Diving compasses are one of the most useful pieces of equipment that all divers should carry while diving. This analogue wrist diving compass is the perfect accessory for divers whether for use on regular dives or training dives. It is an essential piece of safety equipment which allows you to find your bearings even in murky water. This diving compass is of a simple and effective style, mounted on a wrist strap, it allows you to dive hands free while regularly keeping an eye on your direction thanks to its top and side view design. The compass itself is made of a black plastic material to ensure solidity and resistance to salt water while the 18 cm (7 inches) long rubber strap allows you to fit it comfortably around your wrist and above a wetsuit. The 360 degrees are clearly marked on the easily rotating bezel making this diving compass very practical and easy to use. Price: US$ Price (inc tax): US$ /403

192 Name: 5mm Shock Cord Ref: Manufacturer: Other Color: Black,Stock:6,Color: Black,Color: Black,Price: US$ 2.27 Color: Red,Stock:20,Color: Red,Color: Red,Price: US$ 2.27 Color: Orange,Stock:0,Color: Orange,Color: Orange,Price: US$ 2.27 Color: Blue,Stock:15,Color: Blue,Color: Blue,Price: US$ 2.27 This 5mm shock cord is a great accessory for recreational divers and is very commonly used among technical divers. This shock cord, also called bungee cord, is perfect to make your own regulator necklace, octopus holder, or attach any other accessory during your dive. This shock cord is made of woven nylon on the outside and is very resistant to abrasion, mildew, mold, and is protected against UV sunlight. Its inner core is made of high quality rubber capable of elongation without any risk of tearing or wearing. This shock cord is the perfect addition to your dive gear as it can be used in multiple different ways. It is sold by the meter to better fit your needs and comes in black to ensure it suits to all kind of diving sets! Price: US$ 2.27 Price (inc tax): US$ /403

193 Name: Reef Hook with line Ref: Manufacturer: Aropec This reef hook is the perfect accessory for recreational divers and photographers who dive in strong currents. This reef hook enables you to attach yourself to rocks while diving in strong current so you can remain in the same spot without having to over exert yourself. This is perfect for photographers who need to focus on their subjects and stay stable during dives in difficult conditions. The hook is made of stainless steel therefore ensuring it is resistant to corrosion, and will not break in difficult conditions. It also comes with a 106 cm (42 inches) bright yellow line to give you maximum flexibility and visibility while you are attached to rocks. A stainless steel ring is attached to the end of the string enabling you to clip yourself to the hook via a karabiner. It is important to state that this device is not to be used on alive coral as it will cause irreparable damage to it. Price: US$ Price (inc tax): US$ /403

194 Name: Microfibre Towel Ref: Manufacturer: Diving Solutions (Asia) LLP Color: Orange,Stock:20,Color: Orange,Color: Orange,Size: L,Size: L,Size: L,Price: US$ Color: Mint,Stock:0,Color: Mint,Color: Mint,Size: L,Size: L,Size: L,Price: US$ Color: Purple,Stock:20,Color: Purple,Color: Purple,Size: L,Size: L,Size: L,Price: US$ Color: Blue,Stock:20,Color: Blue,Color: Blue,Size: L,Size: L,Size: L,Price: US$ This microfiber towel is the best accessory to add to your dive equipment. It is custom made for Diving Solutions to ensure we provide you with the best quality product. The towel is made of Suede Microfiber material, which ensures maximum absorption of humidity. This microfiber towel is the perfect accessory for diving, and also for various other sports such as yoga, gym, or running. The Suede material provides a very smooth and soft feeling on your skin therefore avoiding the risk of irritations after diving in saltwater environments for example. Additionally, this towel can be used for drying and polishing sensitive dive equipment such as camera casing or o-rings as it will not produce loose fiber. The towel comes in several different colors, pink, yellow, purple, orange, red and three different sizes to fit all needs: S 80x28 cm (31.5x11 inch); M 120x50cm (47.2x19.6 inch); L 160x80cm (62.9x31.5 inch). Price: US$ Price (inc tax): US$ /403

195 Name: Over Pressure Valve (OPV) Outer Ref: Manufacturer: Aropec Damaged or broken outer nut (screws onto the outside of the BCD, and the 'dump valve' screws onto it), simply remove and replace with this spare. Useful to carry in your save-a-dive kit. Suitable for most standard 50mm (2 inches) fittings Price: US$ 5.67 Price (inc tax): US$ /403

196 Name: Hose Mount for Compass Ref: Manufacturer: Aropec Mount your compass onto any hose with ease, helps to clear your wrists if you are wearing multiple dive computers. Fits standard diameter hoses NOTE: Requires removal of wrist strap from compass Price: US$ Price (inc tax): US$ /403

197 Name: 3mm Shock Cord Ref: Manufacturer: Other Color: Black,Stock:6,Color: Black,Color: Black,Price: US$ 1.70 Color: Red,Stock:18,Color: Red,Color: Red,Price: US$ 1.70 Color: Royal Blue,Stock:23,Color: Royal Blue,Color: Royal Blue,Price: US$ 1.70 Color: Hot Pink,Stock:26,Color: Hot Pink,Color: Hot Pink,Price: US$ 1.70 Color: Neon Yellow,Stock:25,Color: Neon Yellow,Color: Neon Yellow,Price: US$ 1.70 Color: Neon Orange,Stock:20,Color: Neon Orange,Color: Neon Orange,Price: US$ 1.70 Color: Neon Green,Stock:8,Color: Neon Green,Color: Neon Green,Price: US$ 1.70 Color: Green,Stock:17,Color: Green,Color: Green,Price: US$ 1.70 This 3mm shock cord is a great accessory for recreational divers and is very commonly used among technical divers. This shock cord, also called bungee cord, is perfect to attach heavy accessories during your dive such as pony bottle for example. This shock cord is made of 100% nylon on the outside and is resistant to abrasion, mildew, mold, and is protected against UV sunlight. Its inner core is made of high quality rubber capable of 100% elongation without any risk of tearing or wearing. This shock cord is ultra resistant and has a breaking strength of approximately 45 kg (100lbs), making it the perfect addition to your technical dive gear. It also comes in eight different colours for colour coding, extra visibility, and to suit all tastes: black, yellow, pink, blue, red, dark green, light green and orange! Price: US$ 1.70 Price (inc tax): US$ /403

198 Name: CPR Pocket Mask Ref: Manufacturer: Aropec This pocket CPR mask is highly recommended to be carried by diving professionals in their first aid kits. The mask features a pre-inflated soft silicone cuff to ensure a close fit, and an elastic strap to hold in place. There is an oxygen inlet to allow for oxygen to be provided to the patient, and a one-way valve to protect the rescuer and patient. The mask is suitable for use on adults and children. Price: US$ Price (inc tax): US$ /403

199 Name: Double Reef Hook with line Ref: Manufacturer: Aropec This reef hook is the perfect accessory for recreational divers and photographers who dive in strong currents. This reef hook enables you to attach yourself to rocks while diving in strong current so you can remain in the same spot without having to overexert yourself. This reef hook features a double hook to provide increased security even in the strongest of currents. This is perfect for photographers who need to focus on their subjects and stay stable during dives in difficult conditions. The hook is made of stainless steel, therefore, ensuring it is resistant to corrosion, and will not break in difficult conditions. It also comes with a 106 cm (42 inches) bright yellow line to give you maximum flexibility and visibility while you are attached to rocks. A stainless steel clip is attached to the end of the string enabling you to clip yourself to the hook. It is important to state that this device is not to be used on live coral as it will cause irreparable damage to it. Price: US$ Price (inc tax): US$ /403

200 Name: Side Release Shock Cord Buckle Ref: Manufacturer: Diving Solutions (Asia) LLP Color: Black,Stock:0,Color: Black,Color: Black,Price: US$ 1.14 Color: Blue,Stock:0,Color: Blue,Color: Blue,Price: US$ 1.14 Color: Green,Stock:0,Color: Green,Color: Green,Price: US$ 1.14 Color: Yellow,Stock:0,Color: Yellow,Color: Yellow,Price: US$ 1.14 Color: Orange,Stock:0,Color: Orange,Color: Orange,Price: US$ 1.14 This plastic buckle features two side release clips, suitable for 5mm shock cord or similar. The buckle is perfect for making regulator necklaces from bungee cord, or for a custom lanyard or bracelet. Price: US$ 1.14 Price (inc tax): US$ /403

201 Name: 550 Paracord - 4.0mm Ref: Manufacturer: Other Color: Pink,Stock:10,Color: Pink,Color: Pink,Price: US$ 0.85 Color: Green,Stock:10,Color: Green,Color: Green,Price: US$ 0.85 Color: Orange,Stock:10,Color: Orange,Color: Orange,Price: US$ 0.85 Color: Yellow,Stock:10,Color: Yellow,Color: Yellow,Price: US$ 0.85 Color: Red,Stock:10,Color: Red,Color: Red,Price: US$ 0.85 Color: Blue,Stock:10,Color: Blue,Color: Blue,Price: US$ 0.85 Type paracord, is a nylon cord with a nylon 32 strand woven outer sheath; that is soft and flexible to handle. With a breaking strength of 250Kg (550lbs) this cord is perfect for attaching equipment and accessories. The cord is rot, mildew, mold and UV resistant, manufactured in the USA. Sold by the Meter. Note : this is NOT elastic. Price: US$ 0.85 Price (inc tax): US$ /403

202 Name: Diving Solutions Store, Android App Ref: Manufacturer: Diving Solutions (Asia) LLP Make browsing our store easier and more convenient with our own web store app. Simply install on any Android device, and keep updated on our store's new items and offers. Browse categories, or search for products, and easily click and buy directly in the app. It couldn`t be simpler! Download and save the.apk file to your phone and following instructions to install. Price: US$ 0.00 Price (inc tax): US$ /403

203 Name: Wetsuit Hanger [Aquatec] - HG-200 Ref: Manufacturer: Aquatec Price: US$ Price (inc tax): US$ /403

204 Name: Shipping Ref: Manufacturer: Price: US$ 0.00 Price (inc tax): US$ /403

205 Name: S$100 Gift Voucher Ref: Manufacturer: Diving Solutions (Asia) LLP Give someone a flexible gift, this gift card is valid for all items in our online store. Voucher is valid for 12 months from date of purchase. Price: US$ Price (inc tax): US$ /403

206 Name: S$50 Gift Voucher Ref: Manufacturer: Diving Solutions (Asia) LLP Give someone a flexible gift, this gift card is valid for all items in our online store. Voucher is valid for 12 months from date of purchase. Price: US$ Price (inc tax): US$ /403

207 Name: S$25 Gift Voucher Ref: Manufacturer: Diving Solutions (Asia) LLP Give someone a flexible gift, this gift card is valid for all items in our online store. Voucher is valid for 12 months from date of purchase. Price: US$ Price (inc tax): US$ /403

208 Name: Aropec Jet Fins Ref: Manufacturer: Aropec Size: Large,Stock:1,Size: Large,Size: Large,Price: US$ Size: Medium,Stock:0,Size: Medium,Size: Medium,Price: US$ Stiff rubber fins give excellent power and performance Vented design, give water diversion to improve stability and balance during movement Adjustable heel strap Stainless steel side buckles for easy to adjustment Price: US$ Price (inc tax): US$ /403

209 Name: Aquatec Rubber Fins Ref: Manufacturer: Aquatec Color: Pink,Stock:0,Color: Pink,Color: Pink,Size: M,Size: M,Size: M,Price: US$ Color: Green,Stock:1,Color: Green,Color: Green,Size: M,Size: M,Size: M,Price: US$ Color: Orange,Stock:1,Color: Orange,Color: Orange,Size: M,Size: M,Size: M,Price: US$ Color: Black,Stock:1,Color: Black,Color: Black,Size: M,Size: M,Size: M,Price: US$ Color: Yellow,Stock:1,Color: Yellow,Color: Yellow,Size: M,Size: M,Size: M,Price: US$ Color: Red,Stock:1,Color: Red,Color: Red,Size: M,Size: M,Size: M,Price: US$ Color: White,Stock:0,Color: White,Color: White,Size: M,Size: M,Size: M,Price: US$ Color: Blue,Stock:1,Color: Blue,Color: Blue,Size: L,Size: L,Size: L,Price: US$ Color: Pink,Stock:0,Color: Pink,Color: Pink,Size: L,Size: L,Size: L,Price: US$ Color: Green,Stock:1,Color: Green,Color: Green,Size: L,Size: L,Size: L,Price: US$ Color: Orange,Stock:1,Color: Orange,Color: Orange,Size: L,Size: L,Size: L,Price: US$ Color: Black,Stock:0,Color: Black,Color: Black,Size: L,Size: L,Size: L,Price: US$ Color: Yellow,Stock:1,Color: Yellow,Color: Yellow,Size: L,Size: L,Size: L,Price: US$ Color: Red,Stock:1,Color: Red,Color: Red,Size: L,Size: L,Size: L,Price: US$ Color: White,Stock:0,Color: White,Color: White,Size: L,Size: L,Size: L,Price: US$ Color: Blue,Stock:1,Color: Blue,Color: Blue,Size: XL,Size: XL,Size: XL,Price: US$ Color: Green,Stock:1,Color: Green,Color: Green,Size: XL,Size: XL,Size: XL,Price: US$ Color: Orange,Stock:1,Color: Orange,Color: Orange,Size: XL,Size: XL,Size: XL,Price: US$ Color: Black,Stock:1,Color: Black,Color: Black,Size: XL,Size: XL,Size: XL,Price: US$ Color: Yellow,Stock:1,Color: Yellow,Color: Yellow,Size: XL,Size: XL,Size: XL,Price: US$ Color: Red,Stock:1,Color: Red,Color: Red,Size: XL,Size: XL,Size: XL,Price: US$ Color: White,Stock:0,Color: White,Color: White,Size: XL,Size: XL,Size: XL,Price: US$ Color: Blue,Stock:0,Color: Blue,Color: Blue,Size: M,Size: M,Size: M,Price: US$ These Aquatec rubber fins jet fins are the tried and tested, high performing fin for technical, experienced and beginner divers alike. The heavy-duty rubber construction ensures durability and a life-span lasting many years to come. Moreover, the Aquatec rubber fins are designed to provide exceptional power, great blade-end snap and superior propulsion with alternate kicks. In addition to power, the Aquatec rubber fins are designed to be negatively buoyant ensuring very good stability, assisting trim and increasing maneuverability. The Aquatec rubber fins come with heavy-duty straps made from stainless steel springs making them convenient and easy to put on and remove, flexible while in use as well as extremely durable and long lasting. These fins are available in variety of sizes including small, medium, large and extralarge and also in huge variety of colours ensuring a fin is available to suit everyone s size and taste! Sizes: M = US6 ~ US8 L = US9 ~ US11 209/403

210 XL = US12 ~ US13 (size will be dependant on your bootie style, i.e. Hard sole booties will need larger size) Price: US$ Price (inc tax): US$ /403

211 Name: Aquatec Rubber Fins - Camo Ref: Manufacturer: Aquatec Color: Blue Camo,Stock:1,Color: Blue Camo,Color: Blue Camo,Size: M,Size: M,Size: M,Price: US$ Color: Yellow Camo,Stock:1,Color: Yellow Camo,Color: Yellow Camo,Size: M,Size: M,Size: M,Price: US$ Color: Red Camo,Stock:0,Color: Red Camo,Color: Red Camo,Size: L,Size: L,Size: L,Price: US$ Color: Blue Camo,Stock:1,Color: Blue Camo,Color: Blue Camo,Size: L,Size: L,Size: L,Price: US$ Color: Yellow Camo,Stock:1,Color: Yellow Camo,Color: Yellow Camo,Size: L,Size: L,Size: L,Price: US$ Color: Red Camo,Stock:1,Color: Red Camo,Color: Red Camo,Size: XL,Size: XL,Size: XL,Price: US$ Color: Blue Camo,Stock:1,Color: Blue Camo,Color: Blue Camo,Size: XL,Size: XL,Size: XL,Price: US$ Color: Yellow Camo,Stock:1,Color: Yellow Camo,Color: Yellow Camo,Size: XL,Size: XL,Size: XL,Price: US$ Color: Red Camo,Stock:1,Color: Red Camo,Color: Red Camo,Size: M,Size: M,Size: M,Price: US$ These Aquatec rubber fins jet fins are the tried and tested, high performing fin for technical, experienced and beginner divers alike. The heavy-duty rubber construction ensures durability and a lifespan lasting many years to come. Moreover, the Aquatec rubber fins are designed to provide exceptional power, great blade-end snap and superior propulsion with alternate kicks. In addition to power, the Aquatec rubber fins are designed to be negatively buoyant ensuring very good stability, assisting trim and increasing maneuverability. The Aquatec rubber fins come with heavy-duty straps made from stainless steel springs making them convenient and easy to put on and remove, flexible while in use as well as extremely durable and long-lasting. These fins are available in a variety of sizes including medium, large and extra-large and also in a huge variety of colors ensuring a fin is available to suit everyone s size and taste! Sizes: M = US6 ~ US8 L = US9 ~ US11 XL = US12 ~ US13 (size will be dependant on your bootie style, i.e. Hard sole booties will need larger size) Price: US$ /403

212 Price (inc tax): US$ /403

213 Name: Open Heel Rubber Fins Ref: Manufacturer: Aropec Size: M,Stock:0,Size: M,Size: M,Price: US$ Size: L,Stock:0,Size: L,Size: L,Price: US$ Size: S,Stock:0,Size: S,Size: S,Price: US$ These open heels fins are made from rubber for long life and good performance, and they feature a soft foot pocket for added comfort. The fins feature a two-channel vented design to efficiently guide water over the fin. The fins are fitted with two quick-release buckles and rubber fin straps. Price: US$ Price (inc tax): US$ /403

214 Name: RG-1100F DIN & RG-2100S Package Ref: Manufacturer: Aquatec Price: US$ Price (inc tax): US$ /403

215 Name: RG-1100F Yoke & RG-2100S Package Ref: Manufacturer: Aquatec Price: US$ Price (inc tax): US$ /403

216 Name: RG-2100F DIN & RG-2100S Package Ref: Manufacturer: Aquatec Price: US$ Price (inc tax): US$ /403

217 Name: RG-2100F Yoke & RG-2100S Package Ref: Manufacturer: Aquatec Price: US$ Price (inc tax): US$ /403

218 Name: RG-3100F DIN & RG-2100S Package Ref: Manufacturer: Aquatec Price: US$ Price (inc tax): US$ /403

219 Name: RG-3100F Yoke & RG-2100S Package Ref: Manufacturer: Aquatec Stock: -1 Price: US$ Price (inc tax): US$ /403

220 Name: RG-4100F DIN & RG-2100S Package Ref: Manufacturer: Aquatec Price: US$ Price (inc tax): US$ /403

221 Name: RG-4100F Yoke & RG-2100S Package Ref: Manufacturer: Aquatec Stock: -1 Price: US$ Price (inc tax): US$ /403

222 Name: RG-1100F DIN & RG-3100S Package Ref: Manufacturer: Aquatec Price: US$ Price (inc tax): US$ /403

223 Name: RG-1100F Yoke & RG-3100S Package Ref: Manufacturer: Aquatec Price: US$ Price (inc tax): US$ /403

224 Name: RG-2100F DIN & RG-3100S Package Ref: Manufacturer: Aquatec Price: US$ Price (inc tax): US$ /403

225 Name: RG-2100F Yoke & RG-3100S Package Ref: Manufacturer: Aquatec Stock: -1 Price: US$ Price (inc tax): US$ /403

226 Name: RG-3100F DIN & RG-3100S Package Ref: Manufacturer: Aquatec Price: US$ Price (inc tax): US$ /403

227 Name: RG-3100F Yoke & RG-3100S Package Ref: Manufacturer: Aquatec Stock: -1 Price: US$ Price (inc tax): US$ /403

228 Name: RG-4100F DIN & RG-3100S Package Ref: Manufacturer: Aquatec Price: US$ Price (inc tax): US$ /403

229 Name: RG-4100F Yoke & RG-3100S Package Ref: Manufacturer: Aquatec Price: US$ Price (inc tax): US$ /403

230 Name: DS350/1000 Torch Mini Pouch Ref: Manufacturer: Diving Solutions (Asia) LLP Stock: -3 Small pouch suitable for our DS350/1000 LED torch, or any torch about 27mm (1 inch) diameter and 100mm (4 inches) long. Fits onto 50mm (2 inch) webbing or a belt, just as useful as an accessory for everyday use or camping as well as diving. Suitable for DS350/1000 LED torches Price: US$ Price (inc tax): US$ /403

231 Name: Thigh Pouch Ref: Manufacturer: Diving Solutions (Asia) LLP Storing accessories properly when diving, is an overlooked art for the recreational diver. How many Christmas Trees have your seen? Where a diver is covered with things dangling from them, it doesn`t look cool, it isn`t practical and can even be an entanglement hazard. Store things safely and neatly in a pouch, these are perfect for reel, SMB`s, torches, etc; this is our large size and can either be fitted to webbing or sewn onto a wetsuit. The pouch has a pocket on front flap & one Internal pocket. Price: US$ Price (inc tax): US$ /403

232 Name: Long Pouch Ref: Manufacturer: Diving Solutions (Asia) LLP Long pouch, with two pockets; suitable for our titanium shears, or a medium sized torch. Loop on the back fits onto 50mm (2 inches) webbing. Two internal pockets, for seperation. Price: US$ Price (inc tax): US$ /403

233 Name: Harness Shoulder Pads (Pair) Ref: Manufacturer: Diving Solutions (Asia) LLP Add some extra comfort to your dive harness, by adding the shoulder pads. These easily fit around the straps (no unthreading needed), with the velcro flaps; suitable for 50mm (2 inches) webbing. Sold in pairs. Price: US$ Price (inc tax): US$ /403

234 Name: Dive Holster Ref: Manufacturer: Aropec Add additional storage/pouches to any wetsuit/shorts with this dive holster. Made from 3mm N/N Neoprene Gives extra storage space to carry additional gear Additional D-rings (both inside and outside) serve as extra attachment points Adjustable Velcro closure Equip with #10 YKK zipper for pockets Price: US$ Price (inc tax): US$ /403

235 Name: Exploration Shorts Ref: Manufacturer: Aropec Size: M,Stock:0,Size: M,Size: M,Price: US$ Size: L,Stock:1,Size: L,Size: L,Price: US$ Size: XL,Stock:0,Size: XL,Size: XL,Price: US$ Size: XXL,Stock:0,Size: XXL,Size: XXL,Price: US$ Size: S,Stock:2,Size: S,Size: S,Price: US$ These 2mm thick neoprene shorts with two thigh pockets allow you to securely store your diving accessories like a spool, reel, cutting device, torch, etc in a neat streamlined fashion. Wear them alone with a rash guard top or our NeoSkin Vest, or wear them over the top of a wetsuit, the choice is yours. Pockets are expandable and made from 600D nylon, featuring a large velcro flap for secure closing, as well as 2 plastic d-rings to attach items to avoid them from being dropped. Right side pocket has two layers of storage, and both pockets have drain holes at the bottom. The shorts have an elasticated waistband, with a drawstring to added comfort. Price: US$ Price (inc tax): US$ /403

236 Name: Weight Pouch Ref: Manufacturer: Aquatec Color: Black,Stock:0,Color: Black,Color: Black,Price: US$ Color: Purple,Stock:0,Color: Purple,Color: Purple,Price: US$ Color: Yellow,Stock:0,Color: Yellow,Color: Yellow,Price: US$ Color: Red,Stock:0,Color: Red,Color: Red,Price: US$ Color: Green,Stock:0,Color: Green,Color: Green,Price: US$ This weight pouch is made from 1680 Denier Cordura, with a webbing loop on the back for fitting to a harness, weight bet or tank strap. The pouch can accept two 2lb weights, and features a drain holt on the bottom Price: US$ Price (inc tax): US$ /403

237 Name: Jelly Fish 1st Aid Kit Ref: Manufacturer: Beach Pharmacy *INTRODUCTORY LAUNCH PRICE* Jelly fish stings can range from annoying to extremely painful; depending on the type of jelly fish and how sensitive you are to the toxin. This 1st aid kit is especially developed to help reduce and heal jelly fish stings, it neutralised the poison, removes stings, cool and helps regenerate damage skin tissue. The treatment is UV and water resistant. Price: US$ Price (inc tax): US$ (Reduction: US$ ) 237/403

238 Name: 1st Stage Dust Cap Ref: Manufacturer: Aropec Stock: -5 This dust cap for a regulator s first stage is a necessary piece of equipment for any divers with their own regulator. A dust cap is an essential device that protects you regulator from getting damaged. Indeed, the dust cap protects your first stage from outside elements while the regulator is not connected to a tank. The dust cap seals over the first stage and prevent dust, water, and critters from entering the regulator s first stage, therefore protecting its complex internal mechanism. This great dust cap is made of rubber, which makes it resistant to corrosion while easy to place and remove from your first stage. Moreover, it is designed as one piece, integrating a band, which enables you to attach this dust cap onto your regulator and avoid losing it. This is a great piece of equipment for any divers wishing to protect their regulator and is suitable for a Yoke type first stage. Price: US$ 6.80 Price (inc tax): US$ /403

239 Name: 2 Hose Clip/Holder Ref: Manufacturer: Aropec Color: Orange,Stock:15,Color: Orange,Color: Orange,Price: US$ 6.80 Color: Black,Stock:11,Color: Black,Color: Black,Price: US$ 6.80 Color: Yellow,Stock:15,Color: Yellow,Color: Yellow,Price: US$ 6.80 Color: Pink,Stock:30,Color: Pink,Color: Pink,Price: US$ 6.80 Color: Blue,Stock:14,Color: Blue,Color: Blue,Price: US$ 6.80 Hose holders or clips are a great addition to a diver s equipment. In fact, all experienced divers know that keeping your regulator s hoses streamlined with your BCD make your dives more comfortable and safe. This hose holder enables you to clip it onto you BCD and can hold either one or two hoses such as, your alternate air-source hose, close to your BCD. Keeping your hoses close to you while diving is very important and will prevent you from running the risks of entanglements, will make it easier for you to reach your equipment quickly and effectively, and will also avoid dragging pieces of your equipment on the marine bottom and therefore damaging the marine environment as well as your equipment. This hose holder is made of plastic, making it resistant to corrosion and easy to use. This is a great addition to your equipment and comes in different colours to suit all tastes! Price: US$ 6.80 Price (inc tax): US$ /403

240 Name: 3 Hose Clip/Holder Ref: Manufacturer: Aropec Color: Black,Stock:8,Color: Black,Color: Black,Price: US$ 6.80 Color: Yellow,Stock:14,Color: Yellow,Color: Yellow,Price: US$ 6.80 Color: Blue,Stock:14,Color: Blue,Color: Blue,Price: US$ 6.80 Hose holders are a great addition to a diver s equipment. In fact, all experienced divers know that keeping your regulator s hoses streamlined with your BCD make your dives more comfortable and safe. This hose holder enables you to clip it onto you BCD and can hold one, two or three hoses at the same time such as, your alternate air-source hose as well as regulator hose, close to your BCD. Keeping your hoses close to you while diving is very important and will prevent you from running the risks of entanglements, will make it easier for you to reach your equipment quickly and effectively, and will also avoid dragging pieces of your equipment on the marine bottom and therefore damaging both the marine environment and your equipment. This hose holder is made of plastic and is designed with a stainless steel latch making it resistant to corrosion and easy to use. This is a great addition to your equipment and comes in different colours to suit all tastes! Price: US$ 6.80 Price (inc tax): US$ /403

241 Name: 360 Deg Swivel Joint Ref: Manufacturer: Aropec Stock: -2 This 360 degree swivel joint is the most useful accessory to add to the second stage of your regulator. In fact, it will relieve you from the uncomfortable feeling of your regulator straining your mouth when you look in different directions, and will relieve you from subsequent jaw fatigue and ache. This 360 deg swivel connector will give freedom of movement to the second stage of your regulator by acting like an elbow, will make your low pressure hose more streamlined, and will enable your second stage to sit comfortably in your mouth, therefore avoiding clenching and tension. This connector is made of nickel platted brass for increased resistance, and is easily fitted in between your second stage and low-pressure hose. It is effortlessly cared for enabling you to fit it and clean it yourself. For your convenience this product also comes with spare o-rings. Price: US$ Price (inc tax): US$ /403

242 Name: DIN Regulator Cover (Delrin) Ref: Manufacturer: Aropec This DIN regulator valve cover is the perfect accessory for protecting your regulator first stage before and after use. This DIN regulator valve cover is essential to protecting your first stage from getting damaged and preventing outside elements from entering your valve. The first stage valve cover seals over the regulator valve and prevents dust, water, and other undesirables from lodging into it. This regulator cover is made especially for DIN regulators and can be easily threaded onto the valve. Made from Delrin material, this regulator valve cover is practically indestructible therefore ensuring resistance to shocks, tearing, and harsh environments. It can be fitted onto 200 and 300 bar first stage valves and comes with a durable string, which enables you to attach the cover to the regulator and avoid loss or misplacement. Price: US$ Price (inc tax): US$ /403

243 Name: Gauge Spool Ref: Manufacturer: Aropec Model: Straight,Stock:90,Model: Straight,Model: Straight,Price: US$ 6.80 Model: Flange,Stock:92,Model: Flange,Model: Flange,Price: US$ 6.80 These are the small device that helps to seal your gauge onto the end of your HP Hose. If you start seeing a stream of bubbles from the bottom of your pressure gauge, its a good sign this part is damaged or worn and should be replaced to stop the leak. Price: US$ 6.80 Price (inc tax): US$ /403

244 Name: Hose Protector Ref: Manufacturer: Aropec Color: Blue,Stock:40,Color: Blue,Color: Blue,Price: US$ 3.40 Color: Pink,Stock:40,Color: Pink,Color: Pink,Price: US$ 3.40 Color: Green,Stock:40,Color: Green,Color: Green,Price: US$ 3.40 Color: Yellow,Stock:40,Color: Yellow,Color: Yellow,Price: US$ 3.40 Color: Black,Stock:34,Color: Black,Color: Black,Price: US$ 3.40 Hose protectors are great pieces of equipment for any divers who wish to protect their hoses. Hoses are an important piece of your diving gear and with time can end up tearing from continuous bending during dives and in storage. Hose protectors are a great way of protecting your hoses, avoiding tearing damages, and therefore helping increase the life of your diving gear. These hose protectors are made with vented rubber material, which enables you to easily fit them onto your hoses, and allows them to retain their flexibility while diving. They are available in five different colours to suit all tastes, and allow you to arrange your gear using colour coding. They are sold in pairs so you can protect both ends of your hoses and measure 10 cm long (4 inches). Price: US$ 3.40 Price (inc tax): US$ /403

245 Name: Octopus Holder Ref: Manufacturer: Aropec Color: Yellow,Stock:8,Color: Yellow,Color: Yellow,Price: US$ 5.67 Having an easily accessible octpus (alternate air source) in an emergency can be a life saver (literaly). Using this clip, the 2nd stage can be securly attached to your BCD when not needed; but with a quick pull it will detach and is ready to breath. Price: US$ 5.67 Price (inc tax): US$ /403

246 Name: Silicon Mouth Piece (Bridge) Ref: Manufacturer: Aropec Color: Clear,Stock:46,Color: Clear,Color: Clear,Price: US$ 6.80 Color: Black,Stock:38,Color: Black,Color: Black,Price: US$ 6.80 These are our most popular mouth peice, they are made from silicon rubber in a 'double bite' design for added comfort and also to help holding in the mouth. They can help to reduce jaw aches, as you do not need to have such a hard bite to hold them in your mouth. Price: US$ 6.80 Price (inc tax): US$ /403

247 Name: Mini Gauge Adapter (90 Degrees) Ref: Manufacturer: Aropec Fit a small thimble gauge, to a HP hose; the perfect ultra small backup for someone who uses and wireless transmitter for their primary air display. Fits onto an HP hose. CE approved (EN250) Price: US$ Price (inc tax): US$ /403

248 Name: Mini Gauge (Straight) Ref: Manufacturer: Aropec Model: PSI,Stock:14,Model: PSI,Model: PSI,Price: US$ Model: Bar,Stock:12,Model: Bar,Model: Bar,Price: US$ Small thimble gauge; fits into port on you first stage. The perfect option for side mount or stage tanks, to indicate fill level. Available in Bar & PSI, fits first stage HP port. CE approved (EN250) Price: US$ Price (inc tax): US$ /403

249 Name: Thread adapter - Male 1/2"x20 to Female 3/8"x24 Ref: Manufacturer: Aropec Allows a 3/8" LP hose to fit into a 1/2" LP port on a second stage. NOTE these are not suitable for use with HP, and doing so could be hazardous to your health! Suitable for low pressure hoses Price: US$ 9.06 Price (inc tax): US$ /403

250 Name: Thread adapter - Male 3/8"x24 to Female 1/2"x20 Ref: Manufacturer: Aropec Allows a 1/2" LP hose to fit into a 3/8" LP port on a second stage. NOTE these are not suitable for use with HP, and doing so could be hazardous to your health! Suitable for low pressure hoses Price: US$ 9.06 Price (inc tax): US$ /403

251 Name: 2nd Stage Quick Disconnect (Complete) Ref: Manufacturer: Aropec This second stage quick disconnect is a wonderful piece of equipment for any divers who possesses different second stage regulators and want to change your rig configuration to better adapt it to your needs and BCDs. In fact, this second stage quick disconnect enables you to connect and disconnect your second stage regulators quickly and effectively without needing to use a wrench. This great device enables you to interchange your second stages onto your low-pressure hoses without running the risk of de-tuning your regulators by misusing tools and fitting them improperly onto your hoses. This second stage quick disconnect is made of nickel-plated brass making it a strong and resistant device and is designed with a built in lock down screw to avoid accidental removal during use. This device also includes male and female fitting making it perfect for personalizing your rig, and can also be used for full-face masks. Price: US$ Price (inc tax): US$ /403

252 Name: 2nd Stage Shut-off Switch Ref: Manufacturer: Aropec This second stage shut-off valve is a wonderful addition to your diving equipment! This device is great for safety and can be used for recreational and technical diving. Indeed, this shut-off switch enables you to have full control of the airflow on a free flowing regulator, or inflator hose for example. For technical divers, such as sidemount divers this device is a fantastic addition to your second set of regulators and can also be added to stage bottles. It can also be fitted onto a dry suit inflator hose system in order to stop it self-inflating or free flowing, making this shut-off valve an important safety device. Easy to put on, just slide it on and off to manually control the airflow to your second stage. This shut-off valve is 4cm (1.57 inch) long and can only be adapted to low pressure hoses with a maximum pressure of 200PSI. Price: US$ Price (inc tax): US$ /403

253 Name: Silicon Mouth Piece (Long) Ref: Manufacturer: Diving Solutions (Asia) LLP Color: Clear,Stock:10,Color: Clear,Color: Clear,Price: US$ 6.80 Color: Orange,Stock:9,Color: Orange,Color: Orange,Price: US$ 6.80 Color: Yellow,Stock:9,Color: Yellow,Color: Yellow,Price: US$ 6.80 Color: Black,Stock:8,Color: Black,Color: Black,Price: US$ 6.80 Quality silicon mouth piece, these design are longer than our other models to allow the second stage to sit further from your chin for more comfort. Its always a good habit to carry a spare on dive trips,you never know when you or your buddy will need it. Price: US$ 6.80 Price (inc tax): US$ /403

254 Name: Scubapro Air2 Adapter Ref: Manufacturer: Aropec Material : Nickel Plated Brass Thread : 9/16"x18 Converts regulator hose to Scubapro Air2 Inflator hose Price: US$ Price (inc tax): US$ /403

255 Name: Thread Adapter - Male 3/8"x24 to Female 7/16"x20 Ref: Manufacturer: Aropec Material : Nickel Plated Brass Male Thread : 3/8"x24 Female Thread : 7/16"x20 Price: US$ 9.06 Price (inc tax): US$ /403

256 Name: Thread Adapter - Male 7/16" x 20 to Female 3/8" x 24 Ref: Manufacturer: Aropec Material : Nickel Plated Brass Male Thread : 7/16"x20 Female Thread : 3/8"x24 Price: US$ 9.06 Price (inc tax): US$ /403

257 Name: DIN to Yoke Converter Ref: Manufacturer: Aropec This DIN to Yoke converter is an essential accessory to add to your dive gear to easily avoid unexpected problems when diving somewhere new. This DIN to Yoke adaptor is essential if your regulator has a DIN valve connection and the tank you need to use is configured for Yoke (or international) valves. The DIN to Yoke converter easily yet securely screws onto your regulator valve enabling your regulator to be conveniently and safely fitted to the Yoke configured tank valve. The adaptor is made from a nickel plated brass material and with a durable, black plastic handle. The construction of this DIN to Yoke adaptor is practically indestructible therefore ensuring resistance to shocks, harsh environments and very importantly, keeping you safe underwater. It can be fitted onto 200 and 300Bar valves and makes an essential addition to your save-a-dive kit bag. Price: US$ Price (inc tax): US$ /403

258 Name: Braided LP Hose - Yellow Ref: Manufacturer: Aropec This 90cm (36 inches) braided low pressure hose is designed with fittings and a length to be used as a second stage hose connecting to an octopus. It is the perfect accessory for those looking to replace their hoses with a superior alternative to traditional rubber hoses. The braided material is flexible making it easier and more comfortable to use while underwater. The overall construction makes this braided low pressure hose lighter, more durable than the traditional rubber hoses making them ideal for the travelling scuba diver. The braided material also ensures these hoses are both abrasion and snag resistant providing a safer dive while the yellow colour will allow the hose to be easily visible when it is needed most. With a maximum working pressure of 86 bar (1250 PSI) and a burst pressure of 344 bar (5000 PSI), you can be confident these hoses will keep you safe and comfortable for a long time to come. Price: US$ Price (inc tax): US$ /403

259 Name: Braided BCD Inflator Hose Ref: Manufacturer: Aropec This 90cm (36 inches) braided low pressure hose is designed with fittings and a length to be used as a second stage hose connecting to your primary regulator. It is the perfect accessory for those looking to replace their hoses with a superior alternative to traditional rubber hoses. The braided material is flexible making it easier and more comfortable to use while underwater. The overall construction makes this braided low pressure hose lighter, more durable than the traditional rubber hoses making them ideal for the travelling scuba diver. The braided material also ensures these hoses are both abrasion and snag resistant providing a safer dive in difficult conditions while the black colour will allow the hose to fit with most sets of scuba equipment. With a maximum working pressure of 86 bar (1250 PSI) and a burst pressure of 344 bar (5000 PSI), you can be confident these hoses will keep you safe and comfortable for a long time to come. Price: US$ Price (inc tax): US$ /403

260 Name: Silicone Mouth Piece (Standard) Ref: Manufacturer: Diving Solutions (Asia) LLP Color: Yellow,Stock:81,Color: Yellow,Color: Yellow,Price: US$ 6.80 Color: Blue,Stock:49,Color: Blue,Color: Blue,Price: US$ 6.80 Color: Black,Stock:50,Color: Black,Color: Black,Price: US$ 6.80 Color: Clear,Stock:81,Color: Clear,Color: Clear,Price: US$ 6.80 Color: Pink,Stock:26,Color: Pink,Color: Pink,Price: US$ 6.80 Standard silicone mouth piece Good for smaller mouths due to extreme flexibilty Made from 'Healthcare Grade' Silicone rubber Made in the USA Price: US$ 6.80 Price (inc tax): US$ /403

261 Name: Silicone Regulator Necklace Ref: Manufacturer: Aropec Color: Pink,Stock:22,Color: Pink,Color: Pink,Price: US$ Color: Orange,Stock:9,Color: Orange,Color: Orange,Price: US$ Color: Black,Stock:7,Color: Black,Color: Black,Price: US$ Color: Yellow,Stock:16,Color: Yellow,Color: Yellow,Price: US$ Color: Glow-in-dark,Stock:4,Color: Glow-in-dark,Color: Glow-in-dark,Price: US$ Color: Blue,Stock:16,Color: Blue,Color: Blue,Price: US$ This regulator necklace is a great piece of safety equipment for technical divers and also for recreational divers. Mostly used by technical divers it enables you to attach your second stage regulator close to your mouth by placing the silicon band around your neck like a necklace. It is also a great safety device for recreational divers and will enable you to keep your regulator hanging on your neck in case it gets ripped out of your mouth during a dive. This necklace is made of healthcare graded silicon rubber for the best comfort on your skin and neck, while avoiding any allergic reactions. This regulator necklace has a diameter of 13cm (5.11 inch), which ensures a close fit around your neck while keeping a comfortable space. It comes in various colors, blue, pink, orange, black, yellow and green to fit all tastes and equipment! Price: US$ Price (inc tax): US$ /403

262 Name: Silicon Octopus Holder Ref: Manufacturer: Diving Solutions (Asia) LLP Color: Glow-in-dark,Stock:0,Color: Glow-in-dark,Color: Glow-in-dark,Price: US$ 4.53 Color: Yellow,Stock:0,Color: Yellow,Color: Yellow,Price: US$ 4.53 Soft silicon rubber, octopus holder; ideal for a lightweight solution to hold your octopus. Simply thread it though itself around a D-ring or any other suitable attachment and its ready to hold your octopus. Price: US$ 4.53 Price (inc tax): US$ /403

263 Name: 2nd Stage Quick Disconnect (Male ONLY) Ref: Manufacturer: Aropec This little gadget is great for divers who use full face masks, and want to be able to quick remove the mask for the hose to store it safely. Or even to allow you to interchange different second stages etc. Built in lockdown screw avoids accidental removal during use. This quick disconnect is suitable for low pressure hoses only! Includes Male fitting ONLY Price: US$ Price (inc tax): US$ /403

264 Name: Braided LP Hose - Black Ref: Manufacturer: Aropec This 80cm (32 inches) braided low pressure hose is designed with fittings and a length to be used as a second stage hose connecting to an octopus. It is the perfect accessory for those looking to replace their hoses with a superior alternative to traditional rubber hoses. The braided material is flexible making it easier and more comfortable to use while underwater. The overall construction makes this braided low pressure hose lighter, more durable than the traditional rubber hoses making them ideal for the travelling scuba diver. The braided material also ensures these hoses are both abrasion and snag resistant providing a safer dive while the yellow colour will allow the hose to be easily visible when it is needed most. With a maximum working pressure of 86 bar (1250 PSI) and a burst pressure of 344 bar (5000 PSI), you can be confident these hoses will keep you safe and comfortable for a long time to come. Price: US$ Price (inc tax): US$ /403

265 Name: HP Hose (15cm) Ref: Manufacturer: Aquatec Stock: -2 This is a short high pressure (HP) hose for attaching a pressure gauge to a first stage. Short hoses like this are often used in side mount configurations, to minimize excess hose length; or for a wireless transmitter to reduce the chance of it getting broken when carrying tanks. Price: US$ Price (inc tax): US$ /403

266 Name: Braided LP Hose (80cm) Ref: Manufacturer: Other Color: Pink,Stock:3,Color: Pink,Color: Pink,Price: US$ Color: Yellow,Stock:2,Color: Yellow,Color: Yellow,Price: US$ Color: Red,Stock:4,Color: Red,Color: Red,Price: US$ Color: Blue,Stock:3,Color: Blue,Color: Blue,Price: US$ Price: US$ Price (inc tax): US$ /403

267 Name: Braided LP Hose (90cm) Ref: Manufacturer: Other Color: Pink,Stock:2,Color: Pink,Color: Pink,Price: US$ Color: Yellow,Stock:0,Color: Yellow,Color: Yellow,Price: US$ Color: Red,Stock:5,Color: Red,Color: Red,Price: US$ Color: Blue,Stock:3,Color: Blue,Color: Blue,Price: US$ Price: US$ Price (inc tax): US$ /403

268 Name: Braided BCD Inflator Hose (75cm) Ref: Manufacturer: Other Color: Pink,Stock:4,Color: Pink,Color: Pink,Price: US$ Color: Yellow,Stock:3,Color: Yellow,Color: Yellow,Price: US$ Color: Purple,Stock:3,Color: Purple,Color: Purple,Price: US$ Color: Blue,Stock:3,Color: Blue,Color: Blue,Price: US$ Price: US$ Price (inc tax): US$ /403

269 Name: Kevlar HP Hose (36 Inch) Ref: Manufacturer: Aropec Stock: -4 This 90cm (36 inches) high pressure hose with internal Kevlar braid is designed with fittings and a length to be used as a first stage hose connecting to your submersible pressure gauge (SPG). It is the perfect length for the majority of divers allowing the hose to be run under the left arm, across the chest and clipped off on the right shoulder D-ring. The internal Kevlar braided material ensure the hose is exceptionally durable while still being more flexible than traditional rubber high pressure hoses making it easier and more comfortable to use while underwater. The black colour will allow the hose to fit with most sets of scuba equipment. With a maximum working pressure of 350 bar (5000 PSI) and a diameter of 7.5mm (0.3 inches) you can be confident these hoses will keep you safe and comfortable for a long time to come. Price: US$ Price (inc tax): US$ /403

270 Name: 1 to 2 Adapter Ref: Manufacturer: Aropec Converts 1x 9/16-18 UNF 2A (Male) into 2x 3/8-24 UNF 2B (Female) Price: US$ Price (inc tax): US$ /403

271 Name: 1 to 3 Adapter (type 1) Ref: Manufacturer: Aropec Converts 1x 3/8-24 UNF 2A (Male) into 3x 3/8-24 UNF 2B (Female) Price: US$ Price (inc tax): US$ /403

272 Name: 1 to 3 Adapter (type 2) Ref: Manufacturer: Aropec Converts 1x 7/16-20 UNF 2A (Male) into 3x 7/16-20 UNF 2B (Female) Price: US$ Price (inc tax): US$ /403

273 Name: Octopus Holder - Aluminium Ref: Manufacturer: Aropec Color: Black,Stock:10,Color: Black,Color: Black,Price: US$ Color: Red,Stock:8,Color: Red,Color: Red,Price: US$ Color: Silver,Stock:10,Color: Silver,Color: Silver,Price: US$ Color: Gold,Stock:9,Color: Gold,Color: Gold,Price: US$ Color: Blue,Stock:10,Color: Blue,Color: Blue,Price: US$ Price: US$ Price (inc tax): US$ /403

274 Name: Long LP Hose (7ft) Ref: Manufacturer: Other Stock: meter (7 foot) long rubber low-pressure hose, as used by wreck and cave divers. Price: US$ Price (inc tax): US$ /403

275 Name: Octopus Holder - Round Ref: Manufacturer: Aropec Color: Orange,Stock:6,Color: Orange,Color: Orange,Price: US$ 3.40 Color: Glow-in-dark,Stock:5,Color: Glow-in-dark,Color: Glow-in-dark,Price: US$ 3.40 Color: Green,Stock:5,Color: Green,Color: Green,Price: US$ 3.40 Color: Yellow,Stock:5,Color: Yellow,Color: Yellow,Price: US$ 3.40 Color: Pink,Stock:5,Color: Pink,Color: Pink,Price: US$ 3.40 Silicon rubber ball type octopus holder with plastic clip. Insert the mouthpiece of your octopus into the ball to hold it securely, in an emergency just pull and use... Price: US$ 3.40 Price (inc tax): US$ /403

276 Name: Thimble Gauge Cover Ref: Manufacturer: Aropec This silicone rubber cover is made to fit over a 22mm (0.8 inch) diameter mini gauge, it helps to protect the gauge from knocks that could chip the glass or damage the body. Note: It requires the gauge to be removed from the hose/1st stage for fitting. Price: US$ 4.53 Price (inc tax): US$ /403

277 Name: Aquatec Guardian Filter Ref: Manufacturer: Aquatec The Aquatec Guardian Air Filter, helps to clean oil, dirt, odours, bacteria and heavy metals from the gas from your tank. The filter features a six-layer easy changeable filter, helps to reduce dry throats by moisturising the air; as well as reducing post dive headaches. It is designed to connect between the 1st stage and the 2nd stage hose, and will require tools for fitting. Once fitted fill with some distilled or bottles water to increase air moisture and reduce dry throat. The charcoal & wool layers remove trace particles of rust and dust as well as odours. A molecular sieve absorbs moisture, and help spread it to increase humidity into the breathing gas. The filter is compatible with Nitrox upto 40%, DO NOT USED WITH HIGHER OXYGEN PERCENTAGES! Price: US$ Price (inc tax): US$ /403

278 Name: Aquatec Guardian Replacement Filter Ref: Manufacturer: Aquatec Replacement air filter for the Guardian Air Filter, the filter helps to remove dirt, rust and other contamination in the breathing gas. When replacing the filter, remember to fill with some distilled or bottles water to increase air moisture and reduce dry throat. The charcoal & wool layers remove trace particles of rust and dust as well as odours. A molecular sieve absorbs moisture, and help spread it to increase humidity into the breathing gas. The filter is compatible with Nitrox upto 40%, DO NOT USED WITH HIGHER OXYGEN PERCENTAGES! Price: US$ Price (inc tax): US$ /403

279 Name: Silicone Mouth Piece (Children) Ref: Manufacturer: Other Color: Pink,Stock:20,Color: Pink,Color: Pink,Price: US$ 6.80 Color: Black,Stock:20,Color: Black,Color: Black,Price: US$ 6.80 Color: Blue,Stock:20,Color: Blue,Color: Blue,Price: US$ 6.80 Child/smallmouth sized silicone mouthpiece, suitable to fit most size regulator second stages. Designed especially for smallmouth and manufactured from 'Healthcare Grade' Silicone rubber for excellent comfort and flexibility. Made in the USA Price: US$ 6.80 Price (inc tax): US$ /403

280 Name: 180 Deg Swivel Joint Ref: Manufacturer: Aquatec Stock: -2 This swivel joint allows your second stage to sit in your mouth more comfortably by allowing the hose to move to a natural position. Thus reducing stress and fatigue on your jaw, allowing you to more easily turn your head; it can also add comfort when sharing air with a buddy. The swivel features a 3/8x24 thread on both sides, so should suit most modern hoses/second stages. It is made from chrome plated brass, with an internal steel ball it is corrosion resistant and supplied with spare o-rings. Price: US$ Price (inc tax): US$ /403

281 Name: Air Buddy Ref: Manufacturer: Aquatec This device works as an emergency 2nd stage, for yourself or others; it connects to your BCD but does not affect your BCD`s operation. The air buddy has a small valve inside that you push with your tongue, to allow air to flow. Breathing from it is similar to breathing from a free-flowing regulator, except that you can start/stop the air flow. It is recommended that the device is fitted by your dive store to ensure it is fitted correctly and safely. Price: US$ Price (inc tax): US$ /403

282 Name: LP Rubber Hose (Black) Ref: Manufacturer: Aquatec Length: 75cm,Stock:-2,Length: 75cm,Length: 75cm,Price: US$ Length: 85cm,Stock:0,Length: 85cm,Length: 85cm,Price: US$ Length: 90cm,Stock:0,Length: 90cm,Length: 90cm,Price: US$ Length: 210cm,Stock:0,Length: 210cm,Length: 210cm,Price: US$ Low-pressure rubber hose, suitable for 23BAR (350PSI) maximum working pressure. One end of the hose is fitted with a 3/8x24 thread (to connect to the first stage), while the other has a 9/16x19 thread (to fit onto a second stage). Price: US$ Price (inc tax): US$ /403

283 Name: LP Rubber Hose (Yellow) Ref: Manufacturer: Aquatec Length: 90cm,Stock:2,Price: US$ Length: 100cm,Stock:-1,Price: US$ Length: 210cm,Stock:0,Price: US$ Length: 75cm,Stock:-2,Price: US$ Low-pressure rubber hose, suitable for 23BAR (350PSI) maximum working pressure. One end of the hose is fitted with a 3/8x24 thread (to connect to the first stage), while the other has a 9/16x19 thread (to fit onto a second stage). Price: US$ Price (inc tax): US$ /403

284 Name: Inflator Hose, Rubber 60cm Ref: Manufacturer: Aquatec Fitting: Air 2,Stock:0,Fitting: Air 2,Fitting: Air 2,Price: US$ Fitting: SeaQuest,Stock:0,Fitting: SeaQuest,Fitting: SeaQuest,Price: US$ Fitting: International,Stock:1,Fitting: International,Fitting: International,Price: US$ This low-pressure power inflator hose is made of rubber and comes in a length of 60cm (23 inches). One end of the hose has a 3/8x24 inch thread, to fit into the first stage; while the other has the fitting selected. Maximum working pressure of the hose is 23BAR (350PSI). Price: US$ Price (inc tax): US$ /403

285 Name: Inflator Hose, Rubber (90cm) Ref: Manufacturer: Aquatec This low-pressure power inflator hose is made of rubber and comes in a length of 90cm (35 inches). One end of the hose has a 3/8x24 inch thread, to fit into the first stage; while the other has the fitting selected. Maximum working pressure of the hose is 23BAR (350PSI). Price: US$ Price (inc tax): US$ /403

286 Name: HP Rubber Hose, 80cm Ref: Manufacturer: Aquatec Stock: -2 This high-pressure hose is suitable for connecting your pressure gauge, to your first stage. It has a maximum working pressure of 350BAR (5000PSI) and is 80cm (31.5 inches) long. The hose is certified to CE250:2000 and CE0721. Price: US$ Price (inc tax): US$ /403

287 Name: RG-1100F Service Kit Ref: Manufacturer: Aquatec This service kit is for an original Aquatec RG-1100F 1st stage and is recommended for use when servicing this type of first stage. Price: US$ Price (inc tax): US$ /403

288 Name: RG-2100F Service Kit Ref: Manufacturer: Aquatec This service kit is for an original Aquatec RG-2100F 1st stage and is recommended for use when servicing this type of first stage. Price: US$ Price (inc tax): US$ /403

289 Name: RG-3100F Service Kit Ref: Manufacturer: Aquatec This service kit is for an original Aquatec RG-3100F 1st stage and is recommended for use when servicing this type of first stage. Price: US$ Price (inc tax): US$ /403

290 Name: RG-4100F Service Kit Ref: Manufacturer: Aquatec This service kit is for an original Aquatec RG-4100F 1st stage and is recommended for use when servicing this type of first stage. Price: US$ Price (inc tax): US$ /403

291 Name: RG-2100S Service Kit Ref: Manufacturer: Aquatec This service kit is for an original Aquatec RG-2100S 2nd stage and is recommended for use when servicing this type of second stage. Price: US$ Price (inc tax): US$ /403

292 Name: RG-3100S Service Kit Ref: Manufacturer: Aquatec This service kit is for an original Aquatec RG-3100S 2nd stage and is recommended for use when servicing this type of second stage. Price: US$ Price (inc tax): US$ /403

293 Name: RG-2100S & RG-3100S Replacement Cover Ref: Manufacturer: Aquatec Color: Green,Stock:0,Color: Green,Color: Green,Price: US$ Color: Orange,Stock:0,Color: Orange,Color: Orange,Price: US$ Color: Purple,Stock:0,Color: Purple,Color: Purple,Price: US$ Color: Yellow,Stock:0,Color: Yellow,Color: Yellow,Price: US$ Color: Red,Stock:0,Color: Red,Color: Red,Price: US$ Color: Blue,Stock:0,Color: Blue,Color: Blue,Price: US$ Replacement front covers for Aquatec RG-2100S & RG-3100S second stages. These covers are easily user replaceable, and allow you to customize the color of your second stage. Simply unscrew the outer ring on the second stage and carefully lift off and replace the cover, and refit the ring. Price: US$ Price (inc tax): US$ /403

294 Name: Scuba Air 3 Service Kit Ref: Manufacturer: Aquatec This service kit is for an original Aquatec Air 3, 2nd stage and is recommended for use when servicing this type of second stage. Price: US$ Price (inc tax): US$ /403

295 Name: Thread adapter - Male 9/16"x18 to Female 3/8"x24 Ref: Manufacturer: Aropec Allows a 9/16" LP hose to fit into a 3/8" LP port on a second stage. NOTE these are not suitable for use with HP, and doing so could be hazardous to your health! Suitable for low pressure hoses Price: US$ 9.06 Price (inc tax): US$ /403

296 Name: Side Mount Tank Kit Ref: Manufacturer: Diving Solutions (Asia) LLP Our simple and flexible Side Mount Tank kit, will allow you to fit any size tank onto your Side Mount harness. This kit can also be used for stage bottle attachment, etc. Includes : Snap bolts x2, Quick link x2, Cam band x1, Tank strap x1, Rope loop, x1 Price: US$ Price (inc tax): US$ /403

297 Name: XDeep Stealth 2.0 Rec RB Ref: Manufacturer: XDeep The Stealth 2.0 Sidemount RB BCD, has been designed as a recreational sidemount system for sports divers. Streamlines and tailored to meet the needs of diving in open water environments. This version of the Stealth has a fully integrated redundant bladder located neatly inside the wing, for added safety and security if necessary. The Stealth give you all the flexibility you expect in sidemount diving, with all the safety too. The harness allows you to be free of the rigid backplate or tank on your back, allowing you to enjoy the improved comfort; which is what makes sidemount diving so attractive to many divers. You can comfortably and easily carry two tanks with the Stealth setup, and it ensures they are streamlined and secure, with the double shell, 13Kg (28 lbs) lift bladder. The Stealth 2.0 has the ability to have the power inflator on the left or the right, allowing added flexibility in your equipment configuration. Price: US$ 1, Price (inc tax): US$ 1, /403

298 Name: XDeep Stealth 2.0 Tec Ref: Manufacturer: XDeep The Stealth 2.0 Sidemount RB BCD, has been designed as the next generation technical sidemount system for technical divers. Streamlined and tailored to meet the needs of diving in confined spaces, carry multiple tanks. The Stealth give you all the flexibility you expect in sidemount diving, with all the safety too. The harness allows you to be free of the rigid backplate or tank on your back, allowing you to be more flexible in moving through wrecks or caves; which is what makes sidemount diving so attractive to technical divers. You can comfortably and easily carry multiple tanks with the Stealth setup, and it ensures they are streamlined and secure, with the double shell, 19Kg (28 lbs) lift bladder. The Stealth 2.0 has the ability to have the power inflator on the left or the right, allowing added flexibility in your equipment configuration. Price: US$ Price (inc tax): US$ /403

299 Name: XDeep Stealth 2.0 Rec Ref: Manufacturer: XDeep The Stealth 2.0 Sidemount BCD, has been designed as a recreational sidemount system for sports divers. Streamlines and tailored to meet the needs of diving in open water environments. The Stealth give you all the flexibility you expect in sidemount diving, with all the safety too. The harness allows you to be free of the rigid backplate or tank on your back, allowing you to enjoy the improved comfort; which is what makes sidemount diving so attractive to many divers. You can comfortably and easily carry two tanks with the Stealth setup, and it ensures they are streamlined and secure, with the double shell, 13Kg (28 lbs) lift bladder. The Stealth 2.0 has the ability to have the power inflator on the left or the right, allowing added flexibility in your equipment configuration. Price: US$ Price (inc tax): US$ /403

300 Name: XDeep Stealth 2.0 Classic Ref: Manufacturer: XDeep The Stealth 2.0 Sidemount Classic BCD, has been designed to meet the extreme requirements for the cave diver. For many years the Stealth 2.0 Classic has been the sidemount harness of choice for serious cave divers. The harness allows great flexibility, with easy removal of the bladder if required. The bladder is a double shell which provides 16Kg (35lbs) lift. The harness and bladder combined with the XDeep harness give excellent streamlining and minimizing the distance between the bladder and your body. Featuring a five-point mounting system the bladder can be adjusted to provide buoyancy to exactly where it is needed for your configuration. Price: US$ Price (inc tax): US$ /403

301 Name: My Style Sidemount BCD Ref: Manufacturer: Aquatec The Aquatec My Style Sidemount BCD is a compact and lightweight sidemount harness, featuring a 26.5lb (12kg) lift bladder made from 1680 Denier Cordura attached to a 50mm (2inches) webbing harness. The harness features a stainless steel buckle, six d-rings for attaching the tanks and accessories. Price: US$ Price (inc tax): US$ /403

302 Name: Finger Spool & Snapbolt (Orange) Ref: Manufacturer: Aropec Length: 30m,Stock:9,Length: 30m,Length: 30m,Price: US$ Length: 50m,Stock:10,Length: 50m,Length: 50m,Price: US$ Length: 20m,Stock:9,Length: 20m,Length: 20m,Price: US$ This finger spool is the perfect diving accessory for those who do not want to compromise simplicity for practicality and ease of use. This product was developed using the simple design of a finger spool combined with a very practical size to allow you to easily carry it during dives and travel. The finger spool is constructed of plastic, which makes it both lightweight and durable. It is available in bright orange and in 3 different lengths, 20m (65 feet), 30m (98 feet) and 50m (164 feet). These convenient features make this product the most practical and easy to use dive spool for all divers from beginner to professional. This spool will allow you to keep in touch with surface support during your dive, as well as performing more technical diving. For your convenience this product also comes with a brass snap bolt to which you can attach a SMB or the spool to your BCD. Price: US$ Price (inc tax): US$ /403

303 Name: Lift bag (Large) Ref: Manufacturer: Aropec Lift bags can be a multi-purpose tool for a diver, not only do they help to increase the bouyancy of objects for recovery, but can also be used in place of an SMB or even as an emergency buoyancy device on the surface. If your using a lift back for object recovery, please practice first; it is easy to get yourself carried to the surface by it! Fitted with OPV (over pressure value) for easy release of air. Price: US$ Price (inc tax): US$ /403

304 Name: Line Arrow (Pk 3) Ref: Manufacturer: Aropec Color: White,Stock:16,Color: White,Color: White,Price: US$ 9.06 Color: Glow-in-dark,Stock:14,Color: Glow-in-dark,Color: Glow-in-dark,Price: US$ 9.06 Color: Yellow,Stock:20,Color: Yellow,Color: Yellow,Price: US$ 9.06 Line arrows are used to help indicate the direction of an exit when cave diving. The guide line is wrapped around the arrow to for a marker, the arrow can easily be felt and direction understood in zero visibility conditions. Available in white, yellow and glow in the dark. Price: US$ 9.06 Price (inc tax): US$ /403

305 Name: Safety Whistle (Orange) Ref: Manufacturer: Aropec Stock: -8 A safety whistle is one of the most essential pieces of safety equipment that scuba divers should carry during a dive. This safety whistle enables divers to alert boats, or other divers to an emergency, an issue, or a danger at a distance which could not be covered by human voice. This safety whistle is made of plastic therefore ensuring durability and resistance against erosion in salt-water environments. It is of a bright orange colour so you are able to locate it quickly, and is designed with a clip to enable you to strap it to your BCD, or any other piece of equipment for an efficient and easy use. Safety whistles are designed to work above as well as under water ensuring maximum safety for divers. It is also a vital signalling device for other outdoor activities such as, camping or hiking, and will ensure greater safety during your adventures. Price: US$ 2.27 Price (inc tax): US$ /403

306 Name: Signalling Mirror Ref: Manufacturer: Aropec Stock: -2 This signalling mirror is one of the most important and most practical daytime emergency-signalling devices available for divers and adventurers. Directed onto a specific target capable of helping you in the case of an emergency, this 4 x 2 mirror reflects the sunlight and directs beams of light to attract attention. It is created with a hole in one of the corners that is designed to act as an aiming indicator. The flashes of light created by the reflection of the sun light can be seen at great distances and therefore ensures much greater chances of being seen especially in marine environments. This mirror is of an ideal size and can be securely stored in your BCD or outdoor jacket pocket to be easily accessible. It is made of a quality material and is resistant to salt water environments. Moreover, this mirror is a perfect device for technical or rebreather divers who whish to perform their own bubble check. Price: US$ Price (inc tax): US$ /403

307 Name: SMB - Large (Orange) Ref: Manufacturer: Aropec One of the most important pieces of safety equipment that divers should carry at all times, this SMB (Surface Marker Buoy) is made of a strong 210D Nylon which is typically used for sporting equipment. It is of a bright orange colour and measures 70 inches (180 cm) ensuring greater visibility to boats even in low light and agitated seas. Moreover, it is designed as a long closed-cell ensuring that once this SMB has been inflated, the air does not escape. For extra safety and ease of use, this buoy can be inflated orally, therefore ensuring your buoyancy stays as neutral as possible. A Velcro strap enables you to roll your SMB tightly making it practical while diving and easy to store. It also has a black clip attached to it permitting you to fasten it onto your BCD while diving. This practical item of safety equipment is a must-have for all scuba divers. Price: US$ Price (inc tax): US$ /403

308 Name: Stainless Steel Pointer with Clip Ref: Manufacturer: Aropec This pointer is a great multi-use accessory to add to your dive gear whether you are a recreational diver or a professional diver. This pointer is 34 cm long (13 inches) enabling you to easily and safely point at interesting marine features during a dive. This pointer is long enough so you do not have to get close to elements you are trying to show, therefore avoiding any risk of sediment disturbance clouding the visibility and avoiding any risk of harming yourself. This pointer is made of stainless steel making it very resistant to corrosion and therefore ensuring a longer lifespan. Moreover, this pointer can also be used as a tank banger, making it a perfect multi-usage device during your dive. It also comes with a stainless steel karabiner so you can secure your pointer onto your BCD during your dive and avoid losing it. Price: US$ Price (inc tax): US$ /403

309 Name: Underwater Notebook Ref: Manufacturer: IST Sports There can sometimes be a need to record information while you are underwater, for surveys or studies for example. Or your may just want to enhance the communication with your buddy by writing, or play Tick-Tack-Toe...! With so many pages, you may have pre-written messages, draw dive site maps, etc. Includes, 25 pages and pencil Price: US$ Price (inc tax): US$ /403

310 Name: Writing Slate Ref: Manufacturer: Aropec Size: Large,Stock:23,Size: Large,Size: Large,Price: US$ Size: XL,Stock:27,Size: XL,Size: XL,Price: US$ Size: Small,Stock:23,Size: Small,Size: Small,Price: US$ Often overlooked by recreational divers, a writing slate is not only designed for professionals or technical divers. A writing slate can be an extremely useful device for underwater navigation, as you can draw a map of your dive site before starting your dive for example. It is also a great safety device as it can enhance communication between you and your buddy during the dive. In fact, this writing slate allows you to write above and under water, erase and start again! These writing slates are available in three designs 20 cm wide (7.9 inches) and 28 cm long (11 inches), 15 cm wide (5.9 inches) and 19 cm long (7.5 inches) or 12.5 cm wide (4.9 inches) and 15 cm long (5.9 inches) therefore giving you ample writing and drawing space. It is made of white plastic to ensure strength, durability and resistance to corrosion. Moreover, this writing slate comes with a black plastic clip which enables you to clip the board onto your BCD during a dive and use it as needed, and a pencil attached to the slate by a plastic coil so you can easily extend it to write on the board. Price: US$ Price (inc tax): US$ /403

311 Name: 30m Enclosed Dive Reel Ref: Manufacturer: Aropec Used on regular dives and on more technical dives, reels are one of the most practical and essential tools for divers. This specific reel has a fully enclosed body to help you prevent line entanglement. This particularly useful feature allows you to wind the line easily and effectively during and after use. Moreover, to give you the best control possible, this spool is designed with a lock to secure the line and ensure it does not self-unwind during use. This reel is also equipped with a quick release latch so you can easily eject the spool in case the line gets jammed. Its practical size makes it easy for you to carry on your BCD and the included lanyard will ensure you keep hold of the spool during use. For your convenience, this product also includes a snap bolt, very useful for clipping the line onto a SMB and securing the reel. Price: US$ Price (inc tax): US$ /403

312 Name: 30m Finger Spool with Winder & Snapbolt (White) Ref: Manufacturer: Aropec Stock: -2 This finger spool is the perfect diving accessory for those who do not want to compromise simplicity for practicality and ease of use. This product was developed using the simple design of a finger spool combined with a very practical size to allow you to easily carry it during dives and travel. With a small and resistant foldable handle on one side of the spool and a winding knob on the other, the design allows you to hold a firm grip of the spool while easily winding the line. These convenient features make this product the most practical and easy to use dive spool for all divers from beginner to professional. This spool will allow you to keep in touch with surface support during your dive, as well as performing more technical diving. For your convenience this product also comes with a 30 m line and a snap bolt to which you can attach a SMB or the spool to your BCD Price: US$ Price (inc tax): US$ /403

313 Name: Tank Banger Ref: Manufacturer: Aropec Color: Orange,Stock:15,Color: Orange,Color: Orange,Price: US$ 9.06 Color: Black,Stock:15,Color: Black,Color: Black,Price: US$ 9.06 Color: Yellow,Stock:15,Color: Yellow,Color: Yellow,Price: US$ 9.06 Color: Green,Stock:15,Color: Green,Color: Green,Price: US$ 9.06 A tank banger is a great device to add to your diving equipment and to enhance communication underwater. In fact, a tank banger enables you to get your buddy s attention underwater whether it be for signaling an underwater creature or an emergency. A tank banger will get your buddy s and other diver s attention quickly and is therefore a good safety device to carry during a dive. This tank banger is designed to be placed directly onto your tank so you can dive hands free and use it when needed. It is composed of a silicon strap to ensure easy of use and resistance to tears that is place around your tank, and of an ABS ball attached to the strap that you can easily reach and grab to bang against your tank to attract attention. This great device comes in various bright colors to fit your tastes, orange, black, or yellow and to ensure it is easily located. Price: US$ 9.06 Price (inc tax): US$ /403

314 Name: Stainless Steel Pointer with Handle Ref: Manufacturer: Aropec Color: Yellow,Stock:4,Color: Yellow,Color: Yellow,Price: US$ Color: Grey,Stock:5,Color: Grey,Color: Grey,Price: US$ Color: Blue,Stock:10,Color: Blue,Color: Blue,Price: US$ This pointer is a great multi-use accessory to add to your dive gear whether you are a recreational diver or a professional diver. This pointer is 35 cm long (14 inches) enabling you to easily and safely point at interesting marine features during a dive. This pointer is long enough so you do not have to get close to elements you are trying to show, therefore avoiding any risk of sediment disturbance clouding the visibility and avoiding any risk of harming yourself. This pointer is made of stainless steel making it very resistant to corrosion and therefore ensuring a longer lifespan. It is constructed with a molded plastic handle for increased comfort and comes in three different colors to fit all tastes, blue, yellow and black. It also comes with a bungee so you can securely wrap it around your wrist and attach it to your BCD during a dive. Price: US$ Price (inc tax): US$ /403

315 Name: Aluminium Pointer Ref: Manufacturer: Aropec Color: Green,Stock:10,Color: Green,Color: Green,Price: US$ Color: Gold,Stock:9,Color: Gold,Color: Gold,Price: US$ Color: Blue,Stock:7,Color: Blue,Color: Blue,Price: US$ Material : 6061 Aluminium Length : 340mm (13.5 inches) Diameter : 8mm (0.31 inches) Anodised, with measurement marks Price: US$ Price (inc tax): US$ /403

316 Name: Finger Spool & Snapbolt (Yellow) Ref: Manufacturer: Aropec Length: 30m,Stock:15,Length: 30m,Length: 30m,Price: US$ Length: 50m,Stock:32,Length: 50m,Length: 50m,Price: US$ Length: 20m,Stock:14,Length: 20m,Length: 20m,Price: US$ This finger spool is the perfect diving accessory for those who do not want to compromise simplicity for practicality and ease of use. This product was developed using the simple design of a finger spool combined with a very practical size to allow you to easily carry it during dives and travel. The Finger Spool is constructed of plastic, which makes it both lightweight and durable. It is available in bright yellow and in 3 different lengths, 20m (65 feet), 30m (98 feet) and 50m (164 feet). These convenient features make this product the most practical and easy to use dive spool for all divers from beginner to professional. This spool will allow you to keep in touch with surface support during your dive, as well as performing more technical diving. For your convenience this product also comes with a brass snap bolt to which you can attach a SMB or the spool to your BCD. Price: US$ Price (inc tax): US$ /403

317 Name: Multi Layer Wrist Slate Ref: Manufacturer: Aropec Curved multi-layer slate, suitable to wear on left or right arm. Includes spare pencil and o-rings. Price: US$ Price (inc tax): US$ /403

318 Name: Dive Flag with Float Ref: Manufacturer: Aropec Dive flag, and float. Useful for making a divers location or training area for students. Price: US$ Price (inc tax): US$ /403

319 Name: Shaker Ref: Manufacturer: Aropec Stock: -1 This shaker is an essential accessory and safety aid used as an underwater, noise making device for divers needing to attract the attention of diving buddies, or nearby divers. This rattle is compact, lightweight and very easy to pack into a small diving kit bag making it perfect for those that are short on packing space! Moreover, the shakers metal components ensure a loud and clear rattle that can be easily heard and located underwater while the included boot conveniently keeps the shaker queit when it is not in use. It is made of a stainless steel material making the device tough and durable so it can easily survive a life on the road in amongst your baggage and diving equipment. With a lanyard included to prevent the shaker from being lost, it is an essential tool for both recreational and professional divers alike. Price: US$ Price (inc tax): US$ /403

320 Name: SMB with Whistle Ref: Manufacturer: Aropec Length : 175cm Diameter : 12.5cm With whistle Pack size: 21cm x 9.5cm Price: US$ Price (inc tax): US$ /403

321 Name: Air Horn Ref: Manufacturer: Aquatec Fitting: Air 2,Stock:0,Fitting: Air 2,Fitting: Air 2,Price: US$ Fitting: SeaQuest,Stock:0,Fitting: SeaQuest,Fitting: SeaQuest,Price: US$ Fitting: International,Stock:1,Fitting: International,Fitting: International,Price: US$ Surface signal air horn, powered by low-pressure inflator hose. Volume 125~130dB, simple single finger action. Caution: Do not point at peoples ears, ear damage may occur! Select the suitable connection to fit your BCD connector (if you're not sure, just ask). Price: US$ Price (inc tax): US$ /403

322 Name: Titanium Pointer Ref: Manufacturer: Diving Solutions (Asia) LLP The ultimate material for corrosion resistance and lightweight, this is the 'King of pointers'. The titanium pointer is made from a single piece of titanium rod and is 440mm (17") long and 5mm (0.2") diameter, with a 25mm (1") diameter ring formed at the end. It features an attractive bluing pattern from the heat treating during manufacture, this is truly a unique pointer. It even makes a different sound when banged against an aluminum tank, so your buddy can tell it's you! Price: US$ Price (inc tax): US$ /403

323 Name: Sub Alert Ref: Manufacturer: Aquatec Fitting: Air 2,Stock:0,Fitting: Air 2,Fitting: Air 2,Price: US$ Fitting: SeaQuest,Stock:0,Fitting: SeaQuest,Fitting: SeaQuest,Price: US$ Fitting: International,Stock:2,Fitting: International,Fitting: International,Price: US$ Compressed air powered, underwater signaling device, just connect it to your low-pressure inflator hose and the BCD connection. A simple push of the button gives out a dB sound underwater. Select the suitable connection to fit your BCD connector (if you're not sure, just ask). The product should be thoroughly cleaned in fresh water after diving to ensure performance. Warning: Keep away from close proximity to ears when using, or personal injury may occur. Price: US$ Price (inc tax): US$ /403

324 Name: Dive-Alert Duo Ref: Manufacturer: Aquatec Fitting: Air 2,Stock:0,Fitting: Air 2,Fitting: Air 2,Price: US$ Fitting: SeaQuest,Stock:0,Fitting: SeaQuest,Fitting: SeaQuest,Price: US$ Fitting: International,Stock:1,Fitting: International,Fitting: International,Price: US$ Compressed air powered, a combination of underwater and above water signalling device, just connect it to your low-pressure inflator hose and the BCD connection. A simple push of the button gives out a dB sound underwater. Above water, the horn produces a whistle of dB! Select the suitable connection to fit your BCD connector (if you're not sure, just ask). The product should be thoroughly cleaned in fresh water after diving to ensure performance. Warning: Keep away from close proximity to ears when using, or personal injury may occur. Price: US$ Price (inc tax): US$ /403

325 Name: Spool Winder Ref: Manufacturer: Aropec Stock: -2 This item is a spool winder handle to suit our fin spools (all sies 20/30/50m). It allows easier and faster winding of the line onto the spool. The winder snap fits onto the spool and features folding handles to help streamline the whole spool and avoid entanglements. Price: US$ 4.53 Price (inc tax): US$ /403

326 Name: Wrist Slate-Triple Panel Ref: Manufacturer: Aquatec This multi-page wrist slate is curved to comfortably fit your arm and features three pages and 6 printed messages that can be moved to allow writing below. The slate has a velcro strap for fitting around your arm and a pencil on rubber lanyard; it is provided with spare O-rings and pencil. Price: US$ Price (inc tax): US$ /403

327 Name: 100% Dry Snorkel with built in whistle Ref: Manufacturer: Aropec Stock: -3 This Aropec snorkel is the perfect piece of equipment for divers and snorkelers. It is a 100% dry snorkel meaning that the snorkel is designed with a floating mechanism at the top preventing water from entering the snorkel as the snorkeler dives down for example. Once the snorkeler comes back to the surface the floating device unlocks the airway again, therefore enabling the snorkeler to breath normally. The body of the snorkel is made of PVC with silicone connections and has a curved barrel specially designed to reduce drag while swimming. It has a soft replaceable silicone mouthpiece, which sits comfortably in the snorkeler s mouth while swimming therefore avoiding jaw ache. Moreover, this snorkel has an integrated alert whistle located underneath the mouthpiece making this product perfect for the safety of divers and snorkelers. It also comes with a solid PVC retainer, which enables you to attach and detach the snorkel easily onto your mask and eliminates the risk of losing it. Price: US$ Price (inc tax): US$ /403

328 Name: Foldable Snorkel Ref: Manufacturer: Other A foldable snorkel is the perfect device for divers who dislike wearing a snorkel while diving but want to keep one handy in case of need! This foldable snorkel is designed by and made for Diving Solution only, therefore ensuring you get the best quality product and value. The foldable snorkel is designed to be folded and neatly stored away into your BCD pocket while diving and is held with a specially made Velcro strap to tighten the snorkel together. It has a dry top deflector to prevent water entry and ensuring a comfortable and safe use. It is made with a large purge valve to clear water easily and quickly from your snorkel. Moreover, this foldable snorkel comes with a liquid silicon replaceable mouthpiece for increased comfort and durability, and a resistant and easy to use snorkel holder for safety and practicality. Price: US$ Price (inc tax): US$ /403

329 Name: Seahorse Snorkel Ref: Manufacturer: Aropec Color: Clear Blue,Stock:5,Color: Clear Blue,Color: Clear Blue,Price: US$ Color: Clear Light Blue,Stock:5,Color: Clear Light Blue,Color: Clear Light Blue,Price: US$ Color: Black,Stock:5,Color: Black,Color: Black,Price: US$ This snorkel features a semi-dry top (meaning, some water may enter when it is submerged), and a drain valve at the bottom. The snorkel is fitted with an adjustable clip for attaching to your mask strap and features a soft flexible silicone hose to add comfort when using. The bottom purge valve is activated by blowing out sharply, this will clear some/all of the water in the snorkel allowing you to breath again. Price: US$ Price (inc tax): US$ /403

330 Name: 20mm Quickfit Band Ref: Manufacturer: Diving Solutions (Asia) LLP Color: Yellow,Stock:2,Color: Yellow,Color: Yellow,Price: US$ Color: Baby Blue,Stock:2,Color: Baby Blue,Color: Baby Blue,Price: US$ Color: Burgandy,Stock:2,Color: Burgandy,Color: Burgandy,Price: US$ Color: Orange,Stock:2,Color: Orange,Color: Orange,Price: US$ Personalise you Garmin 5S with these colored wristbands. These wristbands are made from a soft silicone for comfort while being sturdy enough to withstand everyday use. This band is suitable for a Garmin 5S, or similar that can accept a 20mm Quickfit strap. The strap includes two screw removal tools (not required if currently a quick fit strap), and two 20mm spring bars (if needed). Price: US$ Price (inc tax): US$ /403

331 Name: BCD Hanger Ref: Manufacturer: Aropec Often overlooked, the proper storage of your diving equipment is however essential to it a longer lasting life span. This BCD hanger is the solution to drying and storing your diving equipment in a way that will not damage it. This BCD hanger is made of a strong plastic material making it resistant to heavy equipment and to corrosion from salt water. It is designed for you to be able to place your full diving equipment on it: your BCD, wet suit, regulator, booties... You will find multiple hooks and holders allowing you to secure your BCD, as well as your wet suit in a way that allows air to circulate around for a more efficient dry time. It is also composed with a screwing hole in the middle designed for you to fastened your regulator to it, and hang the hoses on either side of the hanger by using its various hooks. This BCD hanger is the essential accessory that will improve the life span of your dive gear. Price: US$ Price (inc tax): US$ /403

332 Name: BCD Hanger - Heavy Duty Ref: Manufacturer: Aropec The proper storage of your diving equipment is essential to a longer lasting lifespan. This heavy duty BCD hanger is the solution to drying and storing your diving equipment in a way that will not damage it. This BCD hanger is made of a strong plastic material and is the heavy-duty version of other hangers available, making it resistant to heavy equipment and to corrosion from salt water. This BCD hanger is the essential accessory that will improve the life span of your dive gear. Simply place your BCD shoulder straps over the hanger, the two bent edges will ensure your BCD stays in place and avoid any risk of it falling on the floor. It is also composed with a screwing hole in the middle designed for you to fasten your regulator to it and ensure your equipment is secured. This heavy duty hanger comes in black to minimize the visibility of possible scratches over time. Price: US$ Price (inc tax): US$ /403

333 Name: Mesh Dive Bag (medium) Ref: Manufacturer: Aropec Stock: -1 This mesh dive bag from the brand Aeropec is the perfect accessory for your diving excursions. The rectangular structure of this 58 cm long (24 inches) and 35 cm diameter (14 inches) bag makes it the most practical shape for you to be able to effortlessly fit your dive equipment inside during transport between dives such as your BCD, wetsuits and fins. It is made from a PVC mesh design, therefore making it capable of holding heavy equipment, while allowing the water to drain out effectively, and ensuring your dive kit dries quickly. This bag is also composed of 420D Nylon straps allowing you to carry it easily, while the strong Nylon material ensures durability. The plastic zipper on top of the bag allows an easy access to the inside of the bag, enabling you to reach your dive kit quickly and preventing any loss of equipment during transport. Price: US$ Price (inc tax): US$ /403

334 Name: Waterproof Phone Case Ref: Manufacturer: Aropec Color: Pink,Stock:3,Color: Pink,Color: Pink,Price: US$ 4.53 Color: Black,Stock:2,Color: Black,Color: Black,Price: US$ 4.53 Color: Blue,Stock:17,Color: Blue,Color: Blue,Price: US$ 4.53 This pouch will keep you mobile phone clean and dry, where ever you go. Just as useful on the beach, swimming pool, canoing and boating. Features a triple ziplock and velcro to ensure a watertight seal. Price: US$ 4.53 Price (inc tax): US$ /403

335 Name: Ultra-lite Dry Bag Set (3 Pc) Ref: Manufacturer: Aropec Set of 3 ultra light weight dry bags Small = 19.7cm X 33cm (7.75 inches X 13 inches) Medium = 24.1cm X 39.4cm (9.5 inches X 15.5 inches) Large = 27.3cm X 55.9cm (10.75 inches X 22 inches) Price: US$ Price (inc tax): US$ /403

336 Name: Mesh Dive Bag (Large) Ref: Manufacturer: Aropec Stock: Denier Nylon mesh bag, zips into its own pouch for easy carrying/storage. Suitable for full set of diving equipment or multiple sets of snorkeling gear. Folds into itself, for easy storage. Dimensions : 70cm X 33cm X 33cm (27.5" X 13" X 13") Price: US$ Price (inc tax): US$ /403

337 Name: Regulator Bag Ref: Manufacturer: Aropec 600 Denier Nylon regulator bag, with 70 Denier nylon lining & foam cushioning; incorporates a small side document pocket. Carry andle and shoulder strap, with name plate holder. 32.5cm X 28cm X 13cm (12.75" X 11" X 5.1") Price: US$ Price (inc tax): US$ /403

338 Name: Heavy Duty Trolley Bag (Expedition) Ref: Manufacturer: Aropec A trolley bag makes moving your equipment a much more pleasurable experience, no need to carry the bag; just slide out the handle and drag it along on the rubber wheels. This is a rugged trolley bag made from heavy duty 1680 nylon material, featuring YKK corrosion proof plastic zippers. There is an extendable handle hidden below a zipper cover, it has 2 external zipper pockets to store you diving accessories; while the main compartment is big enough to fit the large set of scuba diving equipment. The bag has 2 durable rubber wheels for easy and quiet movement on any hard surface. Bag external dimensions, 75cm X 45cm X 35cm (29.5 inches X inches X inches); nylon color is black is an embroidered logo on the side. Price: US$ Price (inc tax): US$ /403

339 Name: Dry Duffel Bag (Marshal) Ref: Manufacturer: Aropec Keeping your gear dry when not diving can be a tricky thing especially when transferring to and from dive resorts by small boats. This Aropec large 100L dry duffel bag, made from waterproof tarpaulin material; the bag features detachable shoulder straps and a large U shaped zipper opening to allow easier packing. Coming in a matt black finish with the Aropec logo printed onto it, its dimensions are 80cm X 40cm X 35cm (31.5" X 15.7" X 13.7") giving a total volume of 100 litres. It's more than big enough for all the important items you want to keep dry weather your diving, snorkeling, kayaking or just an avid traveler. Price: US$ Price (inc tax): US$ /403

340 Name: Pelican Micro Case Ref: Manufacturer: Pelican Stock: 1 Pelican 1010 micro case is for small sensitive component like mobile phones, etc. The case protects its contents from crushing, dust and water; the case can be submerged to 1m (3.3ft) for 30 minutes without leaking (in accordance with IP67 standards). The case features an easy open latch and a karabiner for attachment; it is provided with a rubber liner for extra protection and doubles as the cases o-ring. Interior : 11.1cm X 7.3cm X 4.3cm (4.37inches X 2.87inches X 1.68inches) Exterior : 14.9cm X 10.3cm X 5.4cm (5.88inches X 4.06inches X 2.12inches) Price: US$ Price (inc tax): US$ /403

341 Name: Pelican Micro Case Ref: Manufacturer: Pelican Stock: 1 Pelican 1020 micro case, is for sensitive components like mobile phones, etc. The case protects its contents from crushing, dust and water; the case can be submerged to 1m (3.3ft) for 30 minutes without leaking (in accordance with IP67 standards). The case features an easy open latch and a karabiner for attachment; it is provided with a rubber liner for extra protection and doubles as the cases o-ring. Features a Pressure Equalisation Valve, to balance interior pressure. Interior : 13.5cm X 9cm X 4.3cm (5.31inches X 3.56inches X 1.68inches) Exterior : 17.3cm X 12.1cm X 5.4cm (6.82inches X 4.75inches X 2.12inches) Price: US$ Price (inc tax): US$ /403

342 Name: Pelican Micro Case Ref: Manufacturer: Pelican Stock: 1 Pelican 1050 micro case, is for perfect for small items like action camera`s, mobile phones, etc. The case protects its contents from crushing, dust and water; the case can be submerged to 1m (3.3ft) for 30 minutes without leaking (in accordance with IP67 standards). The case features an easy open latch and a karabiner for attachment; it is provided with a rubber liner for extra protection and doubles as the cases o-ring. Features a Pressure Equalisation Valve, to balance interior pressure. Interior : 16cm X 9.3cm X 7cm (6.31inches X 3.68inches X 2.75inches) Exterior : 19.1cm X 12.9cm X 7.9cm (7.50inches X 5.06inches X 3.12inches) Price: US$ Price (inc tax): US$ /403

343 Name: Pelican Micro Case Ref: Manufacturer: Pelican Stock: 1 Pelican 1060 micro case is suitable for small items like smartphones, or GoPro cameras etc. The case protects its contents from crushing, dust and water; the case can be submerged to 1m (3.3ft) for 30 minutes without leaking (in accordance with IP67 standards). The case features an easy open latch and a karabiner for attachment; it is provided with a rubber liner for extra protection and doubles as the cases o-ring. Interior : 21cm X 10.8cm X 5.7cm (8.25inches X 4.25inches X 2.25inches) Exterior : 25.1cm X 14.2cm X 6.7cm (9.88inches X 5.59inches X 2.63inches) Price: US$ Price (inc tax): US$ /403

344 Name: Pelican Mobility Case M Ref: Manufacturer: Pelican Stock: 1 The Pelican 1510M Protector Mobility case is a water-resistant, crushproof and dust resistant case suitable for hand carry (meets maximum FAA carry on size). The case features a pressure release valve to balance interior pressure to keep water out, and features a lifetime guarantee; the case can be submerged to 1m (3.3ft) for 30 minutes without leaking (in accordance with IP67 standards). The case features an easy open latch and a karabiner for attachment. The case features wheels and a retractable handle for easy transporting. Interior : 50.2cm X 27.9cm X 19.3cm (19.75inches X 11.00inches X 7.60inches) Exterior : 59.8cm X 36.5cm X 27cm (23.55inches X 14.36inches X 10.62inches) Price: US$ Price (inc tax): US$ /403

345 Name: Pelican Protector Case Ref: Manufacturer: Pelican Stock: 1 The Pelican 1510 Protector case is a water-resistant, crushproof and dust resistant case suitable for hand carry (meets maximum FAA carry on size). The case features a pressure release valve to balance interior pressure to keep water out, and features a lifetime guarantee; the case can be submerged to 1m (3.3ft) for 30 minutes without leaking (in accordance with IP67 standards). The case features an easy open latch and a karabiner for attachment. The case features wheels and a retractable handle for easy transporting. Interior : 50.2cm X 27.9cm X 19.3cm (19.75inches X 11.00inches X 7.60inches) Exterior : 55.9cm X 35.1cm X 22.9cm (22.00inches X 13.81inches X 9.00inches) Price: US$ Price (inc tax): US$ /403

346 Name: Pelican Storm Case - im2050 Ref: Manufacturer: Pelican Color: Olive,Stock:1,Color: Olive,Color: Olive,Price: US$ Color: Black,Stock:1,Color: Black,Color: Black,Price: US$ The Pelican im2050 Storm case is a watertight, crushproof and dustproof case suitable for hand carry (meets maximum FAA carry on size). The case features a Vortex pressure release valve to balance interior pressure to keep water out, 2 padlock hasps and 2 latches. The case features a lifetime guarantee; the case can be submerged to 1m (3.3ft) for 30 minutes without leaking (in accordance with IP67 standards). Interior : 24.1cm X 19.1cm X 10.8cm (9.5inches X 7.5inches X 4.25inches) Exterior : 30cm X 24.9cm X 11.90cm (11.80inches X 9.80inches X 4.70inches) Price: US$ Price (inc tax): US$ /403

347 Name: Pelican Storm Case - im2075 Ref: Manufacturer: Pelican Stock: 1 The Pelican im2075 Storm case is a watertight, crushproof and dustproof case suitable for hand carry (meets maximum FAA carry on size). The case features a Vortex pressure release valve to balance interior pressure to keep water out, 2 padlock hasps and 2 latches. The case features a lifetime guarantee; the case can be submerged to 1m (3.3ft) for 30 minutes without leaking (in accordance with IP67 standards). Interior : 24.1cm X 19.1cm X 18.4cm (9.5inches X 7.5inches X 7.25inches) Exterior : 30cm X 24.9cm X 19.6cm (11.80inches X 9.80inches X 7.70inches) Price: US$ Price (inc tax): US$ /403

348 Name: Pelican Storm Case - im2200 Ref: Manufacturer: Pelican Stock: 1 The Pelican im2200 Storm case is a watertight, crushproof and dustproof case suitable for hand carry (meets maximum FAA carry on size). The case features a Vortex pressure release valve to balance interior pressure to keep water out, 2 padlock hasps and 2 latches. The case features a lifetime guarantee; the case can be submerged to 1m (3.3ft) for 30 minutes without leaking (in accordance with IP67 standards). Interior : 38.1cm X 26.7cm X 15.2cm (15.00inches X 10.50inches X 6.00inches) Exterior : 41.1cm X 32.3cm X 16.8cm (16.20inches X 12.70inches X 6.60inches) Price: US$ Price (inc tax): US$ /403

349 Name: Pelican Storm Case - im2300 Ref: Manufacturer: Pelican Stock: 1 The Pelican im2300 Storm case is a watertight, crushproof and dustproof case suitable for hand carry (meets maximum FAA carry on size). The case features a Vortex pressure release valve to balance interior pressure to keep water out, 2 padlock hasps and 2 latches. The case features a lifetime guarantee; the case can be submerged to 1m (3.3ft) for 30 minutes without leaking (in accordance with IP67 standards). Interior : 43.2cm X 29.7cm X 15.7cm (17.00inches X 11.70inches X 6.20inches) Exterior : 46.2cm X 35.3cm X 17cm (18.20inches X 13.90inches X 6.70inches) Price: US$ Price (inc tax): US$ /403

350 Name: Suunto D6i Novo Ref: Manufacturer: Suunto Color: White,Stock:1,Color: White,Color: White,Price: US$ Color: Stone,Stock:1,Color: Stone,Color: Stone,Price: US$ Color: Stealth,Stock:1,Color: Stealth,Color: Stealth,Price: US$ Color: Black Zulu,Stock:10,Color: Black Zulu,Color: Black Zulu,Price: US$ 1, Color: Stealth Zulu,Stock:1,Color: Stealth Zulu,Color: Stealth Zulu,Price: US$ 1, Color: Instructor Blue Zulu,Stock:1,Color: Instructor Blue Zulu,Color: Instructor Blue Zulu,Price: US$ Color: Black,Stock:1,Color: Black,Color: Black,Price: US$ These are not just life critical piece of equipment for a modern diver, they are also a fashion statement even with day to day use as a watch. Even walking around the city or trekking the built-in compass can come in useful. Steel case and sapphire crystal glass with anti-reflective coating Full continuous decompression algorithm - Suunto RGBM Gas-switching between up to three gases Five modes: air, nitrox, gauge, free and off Innovative apnea timer, and a timer in air/nitrox modes Integrated tilt-compensated 3D digital compass Updateable firmware Optional wireless air integration current cylinder pressure, remaining air time Built-in dive planner Detailed graphical logs and dive data on your PC/Mac using Suunto DM5 software Price: US$ Price (inc tax): US$ /403

351 Name: Suunto Wireless Tank Pod Ref: Manufacturer: Suunto "Always monitor your air", that's what your instructor told you; but there are always distractions that stop us... The wireless transmitter has a programmable alarm level to indicate low on air; connect your dive computer up to a PC and you can download the data including your air consumption at every moment during the dive. Compatible with all Suunto air-integrated dive computers. Price: US$ Price (inc tax): US$ /403

352 Name: Suunto Zoop Novo Ref: Manufacturer: Suunto Color: Black,Stock:1,Color: Black,Color: Black,Price: US$ Color: Lime,Stock:1,Color: Lime,Color: Lime,Price: US$ Color: Blue,Stock:0,Color: Blue,Color: Blue,Price: US$ This entry-level nitrox dive computer should be considered as part of your basic safety equipment for scuba diving! Five modes: air, nitrox, gauge, free and off Full continuous decompression algorithm Suunto RGBM Built-in dive planner Detailed graphical logs and dive data with your PC/Mac using Suunto DM5 software (no cable in the package sold as an accessory) Innovative apnea timer for freediving, and a timer in air/nitrox modes Price: US$ Price (inc tax): US$ /403

353 Name: Suunto D4i Novo Ref: Manufacturer: Suunto Color: Pink,Stock:1,Color: Pink,Color: Pink,Price: US$ Color: Black,Stock:1,Color: Black,Color: Black,Price: US$ Color: White,Stock:1,Color: White,Color: White,Price: US$ Color: Grey,Stock:1,Color: Grey,Color: Grey,Price: US$ Color: Lime,Stock:1,Color: Lime,Color: Lime,Price: US$ Color: Light Gold,Stock:1,Color: Light Gold,Color: Light Gold,Price: US$ Color: Copper,Stock:0,Color: Copper,Color: Copper,Price: US$ Color: Sakura,Stock:1,Color: Sakura,Color: Sakura,Price: US$ Color: Sun,Stock:1,Color: Sun,Color: Sun,Price: US$ Color: Ocean,Stock:1,Color: Ocean,Color: Ocean,Price: US$ Color: Blue,Stock:1,Color: Blue,Color: Blue,Price: US$ A dive computer is now one of the basic pieces of scuba diving safety equipment, the stylish Suunto D4i gives you a full nitrox dive computer in a day-to-day wearable watch. Full continuous decompression algorithm - Suunto RGBM Four modes: air, nitrox, free and off Innovative apnea timer, and a timer in air/nitrox modes Updateable firmware Optional wireless air integration current cylinder pressure, remaining air time Built-in dive planner Detailed graphical logs and dive data on your PC/Mac using Suunto DM5 software Price: US$ Price (inc tax): US$ /403

354 Name: Suunto Dx - Elastomer Ref: Manufacturer: Suunto Color: Silver,Stock:1,Color: Silver,Color: Silver,Price: US$ 1, Color: Black,Stock:1,Color: Black,Color: Black,Price: US$ 2, The Suunto Dx (D10) is the latest and most advanced dive computer in their range. It combines Air, Nitrox, Trimix and even rebreather capabilities into a wristwatch-sized device! Treat yourself to the best Suunto has to offer... Titanium Case, Sapphire Crystal glass Full continuous decompression algorithm, NEW Suunto Fused RGBM Rebreather + Trimix, inc. Helium & Oxygen Gas switching, up to 8 mixes Five modes CCR, air, mixed gas, gauge & off Rubber strap, and USB data cable Tilt-compensated, 3D compass Wireless Air Integration (Optional) Updateable firmware & built-in dive planner Price: US$ 2, Price (inc tax): US$ 2, /403

355 Name: Suunto Eon Core Ref: Manufacturer: Suunto Color: White,Stock:1,Color: White,Color: White,Price: US$ 1, Color: Lime,Stock:1,Color: Lime,Color: Lime,Price: US$ 1, Color: Black,Stock:1,Color: Black,Color: Black,Price: US$ 1, The Suunto Eon Core, give you a large full-color screen dive computer, with customizable information display and air integration. High contrast color screen with large numbers Always-on LED backlight Visually intuitive, consistent presentation Classic, graphical and prominent view styles Customize features with Suunto CustomDisplay in Suunto DM5 User-updatable software Wireless tank pressure readings from up to 10 Suunto Tank PODs Connect over Bluetooth to Suunto Movescount App Keep a diary and share your adventures and photos in Suunto Movescount Plan and customize easily with Suunto DM5 Gauge/Air/Nitrox/Trimix/CCR (fixed point) Suunto Fused RGBM for maximizing dive time No-decompression dive planner Tilt-compensated 3D digital compass Guaranteed to 80 m depth Price: US$ 1, Price (inc tax): US$ 1, /403

356 Name: Suunto Vyper Novo Ref: Manufacturer: Suunto Color: Graphite,Stock:1,Color: Graphite,Color: Graphite,Price: US$ Color: White,Stock:1,Color: White,Color: White,Price: US$ The Vyper is a robust dive computer, adds the advanced features of digital compass, multiple gasses & air-integration for added safety. Optional wireless air integration current cylinder pressure, remaining air time Integrated tilt-compensated 3D digital compass Gas-switching between up to three gases (Oxygen up to 99 %) Cable in the package for connecting to detailed graphical logs and dive data with your PC/Mac using Suunto DM5 software Full continuous decompression algorithm Suunto RGBM Five modes: air, nitrox, gauge, free and off Innovative apnea timer for free diving, and a timer in air/nitrox modes Built-in dive planner Protective rubber boot included in the package Price: US$ Price (inc tax): US$ /403

357 Name: DIN Tank Valve Cover (Delrin) Ref: Manufacturer: Aropec This DIN tank valve cover is the necessary equipment for protecting your tank valve before and after use. In fact it is great for protecting your tank valve from getting damaged and preventing outside elements from entering your valve. The valve cover seals over the tank valve and prevents dust, water, and other undesirables from lodging into your valve. It is also a very useful device to differentiate which tank is full from which needs filling therefore avoiding unnecessary confusion. This tank valve is made especially for DIN valves and can be easily threaded into the valve. Made from Delrin material, this tank valve cover is practically indestructible therefore ensuring resistance to shocks, tearing, and harsh environments. It can be fitted onto 200 and 300Bar tank valves and comes with a string, which enables you to attach the cover to the tank and avoid loss or misplacement. Price: US$ Price (inc tax): US$ /403

358 Name: Tank Cam Band Ref: Manufacturer: Aropec Stock: -10 A standard 50mm (2") wide tank 'cam band' 90cm (35") long, perfect as a replacement for a warn band on an existing BCD/harness or for the DIY type looking to make something themselves. These bands can also be used for Side Mounting or stage bottle mounting. Fits most tanks up to 13 Litres. Cam buckle is plastic and band features a rubber pad for better grip onto tank. Price: US$ Price (inc tax): US$ /403

359 Name: Tank Knob - Round/Long Ref: Manufacturer: Aropec Color: Green,Stock:10,Color: Green,Color: Green,Price: US$ 4.53 Color: Orange,Stock:10,Color: Orange,Color: Orange,Price: US$ 4.53 Color: Black,Stock:10,Color: Black,Color: Black,Price: US$ 4.53 Color: Yellow,Stock:10,Color: Yellow,Color: Yellow,Price: US$ 4.53 Color: Blue,Stock:10,Color: Blue,Color: Blue,Price: US$ 4.53 Replacement tank knob, carry one as a spare incse you need it. Color the tank so you know its yours or the contents (i.e. Green = Nitrox). This is a long round type that allows a good grip for turning. Price: US$ 4.53 Price (inc tax): US$ /403

360 Name: Tank O-Ring (Nitrile) Ref: Manufacturer: Other These o-rings are made from Nitrile rubber so can be used for Nitrox upto MAX 40%, do not expose these o-rings to oxygen (for example during partial pressure blending) as they made combust and/or contaminte the air. These are of a 90 hardness, which is slightly more than what is usually used; so offer a linger life die to less wear. Suitable for yoke valve, sold INDIVIDUALLY Price: US$ 1.14 Price (inc tax): US$ /403

361 Name: Tank O-Ring (Viton) Ref: Manufacturer: Other These o-rings are made from Viton, which is suitbale for use with pure oxygen; so are recommended for applications of Nitrox above 40%. They are a black color, so care should be taken not to confuse them with the standard Nitrile type that are NOT oxygen compatible. Suitable for yoke valve, sold INDIVIDUALLY Price: US$ 2.27 Price (inc tax): US$ /403

362 Name: Tank Valve Cover Ref: Manufacturer: Aropec Color: Green,Stock:10,Color: Green,Color: Green,Price: US$ 5.67 Color: Black,Stock:10,Color: Black,Color: Black,Price: US$ 5.67 Color: Yellow,Stock:5,Color: Yellow,Color: Yellow,Price: US$ 5.67 Color: White,Stock:13,Color: White,Color: White,Price: US$ 5.67 Color: Blue,Stock:4,Color: Blue,Color: Blue,Price: US$ 5.67 Silicon rubber cover for a yoke style tank valve, help protect the valve from dust/water or damage as well as using as an idicator to know if the tank has been filled. Price: US$ 5.67 Price (inc tax): US$ /403

363 Name: Tank Valve Knob - Oval Ref: Manufacturer: Aropec Color: Orange,Stock:12,Color: Orange,Color: Orange,Price: US$ 6.80 Color: Black,Stock:10,Color: Black,Color: Black,Price: US$ 6.80 Color: Green,Stock:10,Color: Green,Color: Green,Price: US$ 6.80 Oval tank knob for better grip, easier operation. Use colors to identify your own tanks or the tanks contents (e.g. Nitrox, etc). Or great just as a spare incase you need one... Price: US$ 6.80 Price (inc tax): US$ /403

364 Name: Silicone Tank Strap Ref: Manufacturer: Diving Solutions (Asia) LLP Color: Yellow,Stock:88,Color: Yellow,Color: Yellow,Size: AL80 (6inch/15cm diameter),size: AL80 (6inch/15cm diameter),size: AL80 (6inch/15cm diameter),price: US$ Color: Black,Stock:24,Color: Black,Color: Black,Size: AL40 (4inch/10cm),Size: AL40 (4inch/10cm),Size: AL40 (4inch/10cm),Price: US$ Color: Yellow,Stock:24,Color: Yellow,Color: Yellow,Size: AL40 (4inch/10cm),Size: AL40 (4inch/10cm),Size: AL40 (4inch/10cm),Price: US$ Color: Black,Stock:67,Color: Black,Color: Black,Size: AL80 (6inch/15cm diameter),size: AL80 (6inch/15cm diameter),size: AL80 (6inch/15cm diameter),price: US$ This silicon tank strap is a very useful and essential addition to your dive equipment if you are a sidemount diver or use stage bottles. Very easy to use and very practical this silicon tank strap will allow you to keep your regulator hoses neatly tidied away during a dive. Simply slide the silicon strap onto the tank and fold the hose inside the strap. To make things easier, the strap is designed with a small silicon handle so you can easily slide and fold your hoses in between the tank and the strap either on the surface or underwater. It is made in silicon rubber, therefore ensuring durability and resistance to tear and saltwater environments. The diameter of this silicon strap is 15cm (6 inch) and can fit easily onto AL80 size tanks as well as AL40 size tanks. It comes in two different colors, black or yellow, for you to choose. Price: US$ Price (inc tax): US$ /403

365 Name: Tank Valve Cover (Type 2) Ref: Manufacturer: Aropec Color: Black,Stock:9,Color: Black,Color: Black,Price: US$ 5.67 Color: Yellow,Stock:14,Color: Yellow,Color: Yellow,Price: US$ 5.67 Color: Pink,Stock:16,Color: Pink,Color: Pink,Price: US$ 5.67 Color: Green,Stock:8,Color: Green,Color: Green,Price: US$ 5.67 Silicon rubber cover for a yoke style tank valve, help protect the valve from dust/water or damage as well as using as an idicator to know if the tank has been filled. Price: US$ 5.67 Price (inc tax): US$ /403

366 Name: Christo-Lube MGC111 O2 Grease (5g) Ref: Manufacturer: Other This Christo-Lube Oxygen compatible grease is an essential component to add to your maintenance and save-a-dive kit bag. The high performance PFPE based lubricant is designed to provide long lasting lubrication and protection to all of your most essential diving gear. By placing just a small quantity onto essential equipment such as O-rings, adaptors and hose fittings you can easily extend the life-span of your equipment by protecting it against salt, oxidation and corrosion while, more importantly, improving your own safety. Moreover, Christo-Lube Oxygen compatible grease is tested and approved by NASA for use in liquid and gaseous oxygen (LOX/GOX) systems up to 10,000psi making it an essential part of your safety and save-a-dive kit. The packaging is durable yet lightweight making it very easy to pack and carry while the convenient re-closable squeeze tube will ensure none of the lubrication ever leaks or is wasted! Price: US$ Price (inc tax): US$ /403

367 Name: Tank Valve (Yoke) Ref: Manufacturer: Other Tank valve, Yoke style Price: US$ Price (inc tax): US$ /403

368 Name: 12 in 1 Dive Tool Ref: Manufacturer: Aropec This 12-in-1 diving tool is the most complete diving tool for divers who want to be able to fix their equipment quickly and easily regardless of where they are. This 12-in-1dive tool is made of stainless steel therefore ensuring durability and resistance. It is of a very practical size, which makes it easy to transport and stored in a dive bag, or small box to take on a boat for example. It is a must for quick fixes and can save you a dive when on an excursion! In fact, you are easily able to tightened bolts or swap din and yoke adapters with this tool for example. The stainless steel material ensures a longer life span than most other tools, and it needs to be regularly cleaned and kept out of the salt water as much as possible in order to prevent premature rust formation. The tool is composed of open-ended wrenches of sizes: 1/2, 9/16, 5/8, 11/16, 13/16 and 15 mm; screwdrivers: 1/8 and ¼ flat and #1 Phillips; Allen wrenches: 3/16 and 5/32. Price: US$ Price (inc tax): US$ /403

369 Name: 8 in 1 Dive Tool Ref: Manufacturer: Aropec This 8-in-1 dive tool is the perfect multi-tool accessory for your save-a-dive kit, and will allow you to perform quick repairs and changes on your dive kit anywhere in the world. This tool is also a wonderful mechanical repair accessory for any camping or trekking adventurer, and will come in handy time and again. It is made of Chrome vanadium steel making this tool strong and resistant. Moreover, it is of a very compact and practical size, as the tools are safely folded on each other, and allows you to carry it easily and safely wherever you go in a jacket pocket or inside a bag. It is composed of hex keys: 2, 2.5, 3, 4, 5 and 6 mm; a straight screw driver and a Phillips screw driver. This multi functional tool is a must for any divers who desire to maintain their dive kit and perform small repairs in the field. Price: US$ Price (inc tax): US$ /403

370 Name: 9 in 1 Dive Tool Ref: Manufacturer: Aropec This 9-in-1 dive tool is the perfect multi-tool accessory for your save-a-dive kit, and will allow you to perform quick repairs and changes on your dive kit anywhere in the world. This tool is also a wonderful mechanical repair accessory for any camping or trekking adventurer, and will come in handy time and again. It is made of Chrome vanadium steel making this tool strong and resistant. Moreover, it is of a very compact and practical size, as the tools are safely folded on each other, and allows you to carry it easily and safely wherever you go in a jacket pocket or inside a bag. It is composed of hex keys: 2, 2.5, 3, 4, 5 and 6 mm; a straight screw driver, a Phillips screw driver and a T25 Torx driver. This multi functional tool is a must for any divers who desire to maintain their dive kit and perform small repairs in the field. Price: US$ Price (inc tax): US$ /403

371 Name: Dive Tool with O-Ring Pick Ref: Manufacturer: Aropec Stock: -1 This is the perfect multi-tool accessory for your save-a-dive kit, and will allow you to perform quick repairs and changes on your dive kit anywhere in the world. Service your BCD inflator with the inflator Shrader valve tool, and replace your o-rings easily with the O-Ring pick for example!! This tool is also a wonderful mechanical repair accessory for any camping or trekking adventurer, and will come handy multiple times again. It is made of Chrome vanadium steel making this tool strong and resistant. Moreover, it is of a very compact and practical size, as the tools are safely folded on each other, and allows you to carry it easily and safely wherever you go in a jacket pocket or inside a bag. It includes an orifice adjustment flat screw driver, a brass o-ring pick, an inflator Schrader valve tool, a Phillips screw driver, hex wrenches: 1/4, 3/16 and 5/32, and a valve nut slotted screw driver. Price: US$ Price (inc tax): US$ /403

372 Name: 2nd Stage Cover Remover Ref: Manufacturer: Aropec Soft silicone pad with 78mm internal diameter, for easy removal of regulator 2nd stage front cover. Price: US$ 6.80 Price (inc tax): US$ /403

373 Name: OPV Tool Ref: Manufacturer: Aropec OPV removal/replacement tool Price: US$ Price (inc tax): US$ /403

374 Name: Schrader Valve Stem Tool Ref: Manufacturer: Aropec Schrader valve tool, for removing valve from inflator hoses, etc. Price: US$ Price (inc tax): US$ /403

375 Name: 1st Stage Spanner Ref: Manufacturer: Aropec 1st Stage spanner, with 4mm Pin and 37mm opening. Price: US$ Price (inc tax): US$ /403

376 Name: Tank Knob Driver Ref: Manufacturer: Aropec Stock: -1 Driver for fitting/removal of tank knob (hand wheel) Price: US$ Price (inc tax): US$ /403

377 Name: Intermediate Pressure Gauge Ref: Manufacturer: Aropec A great accessory for your dive gear kit, this pressure gauge is made to connect to your regulators BCD inflator, and it allows you to test the intermediate pressure from the 1st stage. This is an important check as it allows early identification of protentional 1st stage problems, that could seriously damage your regulator; or indicate when a regulator needs servicing. Use the gauge after servicing your regulator to adjust the 1st stage intermediate pressure to the correct value for your regulator model (refer to manufacturers specifications). The gauge is covers in a rubber boot to protect from damage and increase the life of the gauge. Rated upto 20 BAR (300 PSI), DO NOT EXCEED PRESSURE RATING OF GAUGE! Price: US$ Price (inc tax): US$ /403

378 Name: O-Ring Kit Ref: Manufacturer: Aropec Stock: -1 This is a general diver's o-ring kit featuring 18 common sizes (total 200pcs) for scuba diving equipment. All housed on a compartmented box and includes 3 o-ring picks for safe removal of oring. All the o-rings are in international AS sizes, and of NBR 70 material. AS AS AS pcs 10 pcs 10 pcs AS AS AS pcs 10 pcs 15 pcs AS AS AS pcs 15 pcs 15 pcs AS AS AS pcs 10 pcs 10 pcs AS AS AS pcs 10 pcs 10 pcs AS AS AS pcs 10 pcs 10 pcs Price: US$ Price (inc tax): US$ /403

379 Name: Cable Tie Tool Ref: Manufacturer: Diving Solutions (Asia) LLP This tool is used for tightening and correctly cutting cable ties, up to 6mm wide. It is perfect to use when replacing the mouthpiece on your regulator. The tool helps you to suitably tighten the cable tie, and cut it flush (avoiding the sharp protruding plastic you get when you try to use cutters or scissors. Price: US$ 6.80 Price (inc tax): US$ /403

380 Name: NeoSkin Hooded Vest Ref: Manufacturer: Aropec Size: S,Stock:3,Size: S,Size: S,Price: US$ Size: M,Stock:1,Size: M,Size: M,Price: US$ Size: L,Stock:1,Size: L,Size: L,Price: US$ Size: XL,Stock:2,Size: XL,Size: XL,Price: US$ Size: XXL,Stock:2,Size: XXL,Size: XXL,Price: US$ Size: XS,Stock:2,Size: XS,Size: XS,Price: US$ This sleeveless hooded top is manufactured using the NeoSkin Neoprene to guarantee superior thermal insulation from the water. It features a velcro strip on the right side to allow easier fitting and removal. The top is reversible so can be warm with the silver side on the inside or the outside. Flatlocked stitching means no chafing when wearing direct against your skin, and all edges do not have binding to increase comfort too. So whether you using it under your wetsuit for added thermal protection or on its own you can be sure of warms and comfort. Price: US$ Price (inc tax): US$ /403

381 Name: Garmin Fenix 5X Ref: Manufacturer: Garmin The Fenix 5X is the ultimate multisports smartwatch, featuring GPS/GLONASS navigation and a 30.5mm (1.2 inches) full color, always-on color screen in a 50mm (2 inches) diameter casing. The casing features the Garmin Quickfit bands system, so customizing your band color to suit your mood only takes a few seconds. Waterproof to 10 ATM, means you don`t have to worry about getting it wet; while the rechargeable battery removes the worry of battery changes. On a full charge, the 5X can last up to 15 days in smartwatch mode, and up to 20 hours with GPS turned on. It also features an optical heart rate monitor on the back of the casing for continuous monitoring/recording of heart rate during activities. Simple switching between multisports features only requires 1 button press, making it easy to use whatever your sports. The Fenix 5X connects to the Garmin Connect app on your phone/table and automatically sync data between them, you can then analyze or share this data with friends. Price: US$ 1, Price (inc tax): US$ 1, /403

382 Name: Garmin Fenix 5 Sapphire Ref: Manufacturer: Garmin The Garmin Fenix 5 is premium multisport GPS watch with heart rate function. Navigation is taken care of by the GPS and GLONASS satellite reception and a 3 axis compass with a gyroscope. All your activities are downloaded to your phone and synced to the cloud with the use of the Gamin Connect app. Where you can analyze your performance, share it with your friends and create challenges for yourself and friends. This Fenix features a sapphire cover glass to added scratch resistance. Price: US$ 1, Price (inc tax): US$ 1, /403

383 Name: Garmin Fenix 5s Ref: Manufacturer: Garmin Color: Frost Blue,Stock:1,Color: Frost Blue,Color: Frost Blue,Price: US$ 1, Color: Rose Gold,Stock:1,Color: Rose Gold,Color: Rose Gold,Price: US$ 1, Color: Pink Meringue,Stock:0,Color: Pink Meringue,Color: Pink Meringue,Price: US$ 1, Color: Carrara White,Stock:0,Color: Carrara White,Color: Carrara White,Price: US$ Color: Black,Stock:1,Color: Black,Color: Black,Price: US$ 1, The Garmin Fenix 5s premium multisport GPS watch with heart rate function. Navigation is taken care of by the GPS and GLONASS satellite reception and a 3 axis compass with a gyroscope. All your activities are downloaded to your phone and synced to the cloud with the use of the Gamin Connect app. Where you can analyze your performance, share it with your friends and create challenges for yourself and friends. Price: US$ 1, Price (inc tax): US$ 1, /403

384 Name: Garmin Fenix 5S Plus (42mm) Ref: Manufacturer: Garmin Color: Rose Gold,Stock:1,Color: Rose Gold,Color: Rose Gold,Price: US$ 1, Color: Black,Stock:1,Color: Black,Color: Black,Price: US$ 1, This Fenix 5S Plus offers a smaller sized (42mm, 1.65 inches) GPS smartwatch with heart rate technology and TOPO maps. Designed for adventure with a 1.2" sunlight readable LCD display, stainless steel bezel, buttons and rear case. You can easily store and play 500 sings directly from the watch; by connecting your Bluetooth headphones or use the Garmin Pay app for contactless payments via your watch. Featuring GPS/GLONASS/Galileo navigation and Treadline popularity routing to help you find the best paths. Battery life is up to 6 days on a single charge from its USB charger. Easily customize your look, with QuickFit bands; that take seconds to remove and replace without the need for any tools. Price: US$ 1, Price (inc tax): US$ 1, /403

385 Name: Garmin Fenix 5 Plus (47mm) Ref: Manufacturer: Garmin Color: Carbon Gray / Titanium,Stock:1,Color: Carbon Gray / Titanium,Color: Carbon Gray / Titanium,Price: US$ 1, Color: Carbon Gray,Stock:1,Color: Carbon Gray,Color: Carbon Gray,Price: US$ 1, This Fenix 5 Plus offers a medium sized (47mm, 1.85 inches) GPS smartwatch with heart rate technology and TOPO maps. Designed for adventure with a 1.2" sunlight readable LCD display, stainless steel bezel, buttons and rear case. You can easily store and play 500 sings directly from the watch; by connecting your Bluetooth headphones or use the Garmin Pay app for contactless payments via your watch. Featuring GPS/GLONASS/Galileo navigation and Treadline popularity routing to help you find the best paths. Battery life is up to 6 days on a single charge from its USB charger. Easily customize your look, with QuickFit bands; that take seconds to remove and replace without the need for any tools. Price: US$ 1, Price (inc tax): US$ 1, /403

386 Name: Garmin Fenix 5X Plus (51mm) Ref: Manufacturer: Garmin Color: Carbon Gray / Titanium,Stock:1,Color: Carbon Gray / Titanium,Color: Carbon Gray / Titanium,Price: US$ 1, Color: Carbon Gray,Stock:1,Color: Carbon Gray,Color: Carbon Gray,Price: US$ 1, This Fenix 5X Plus offers a smaller sized (51mm, 2.0 inches) GPS smartwatch with heart rate technology and TOPO maps. Designed for adventure with a 1.2" sunlight readable LCD display, stainless steel bezel, buttons and rear case. You can easily store and play 500 sings directly from the watch; by connecting your Bluetooth headphones or use the Garmin Pay app for contactless payments via your watch. Featuring GPS/GLONASS/Galileo navigation and Treadline popularity routing to help you find the best paths. Battery life is up to 6 days on a single charge from its USB charger. Easily customize your look, with QuickFit bands; that take seconds to remove and replace without the need for any tools. Price: US$ 1, Price (inc tax): US$ 1, /403

387 Name: Garmin Forerunner 235 Ref: Manufacturer: Garmin Color: Frost Blue,Stock:0,Color: Frost Blue,Color: Frost Blue,Price: US$ Color: Lava Red,Stock:0,Color: Lava Red,Color: Lava Red,Price: US$ Color: Solar Flare,Stock:0,Color: Solar Flare,Color: Solar Flare,Price: US$ Color: Black/Grey,Stock:0,Color: Black/Grey,Color: Black/Grey,Price: US$ The Garmin Forerunner 235 is a GPS Running Watch, with built-in wrist-based heart rate monitor. The Forerunner 235 tracks distance, pace, time, heart rate and more all automatically while your running; using the Garmin Connect app it can automatically upload your data to your profile. Customise the watch, by downloading data fields, watch faces, applications, and widgets using Connect IQ to suit the way you train/run. Using an accelerometer, the Forerunner can monitor your running pace/distance whether you're on a treadmill or street. With the built-in GPS and GLONASS capability, you can quickly locate your position outdoors and precisely track distance traveled. Price: US$ Price (inc tax): US$ /403

388 Name: Garmin Vivoactive 3 Music Ref: Manufacturer: Garmin Vivoactive 3 Music, from Garmin, is a GPS Smartwatch with built-in music storage and playback. No need to use your mobile phone for music while you are training, download up to 500 songs up to your watch and listen to them using Bluetooth wireless headphones. With 15 pre-loaded sports app, and much more available for download using the Garmin Connect app, the Vivoactive 3 Music is a great companion for exercise. Monitor your fitness levels with VO2, age fitness, and your daily stress, or even may contactless payments just with your watch; using the Garmin Pay app. Price: US$ Price (inc tax): US$ /403

389 Name: Garmin Vivofit 4 Ref: Manufacturer: Garmin Color: White,Stock:0,Color: White,Color: White,Price: US$ Color: Speckle,Stock:0,Color: Speckle,Color: Speckle,Price: US$ Color: Black/Large,Stock:0,Color: Black/Large,Color: Black/Large,Price: US$ Color: Black,Stock:0,Color: Black,Color: Black,Price: US$ The Vivofit 4 from Garmin, is an activity tracker with a 1+ year battery life! Featuring an always-on customizable color display, it tracks your steps, distance and calories burnt; also being able to monitor your sleep and provides personalized daily step goals. The Vivofit 4 periodically syncs with Garmin Connect to ensure your data is saved and can be shared with others. Using Move IQ, the Vivofit 4 automatically starts and stops when you are performing activities to make it extremely simple to use. Designed in a low profile silicone strap, for extra comfort and style; the Vivofit 4 can be worn 24/7. Price: US$ Price (inc tax): US$ /403

390 Name: Garmin Vivofit Jr 2 (Stretchy) Ref: Manufacturer: Garmin Color: BB-8,Stock:0,Color: BB-8,Color: BB-8,Price: US$ Color: Avengers,Stock:0,Color: Avengers,Color: Avengers,Price: US$ Color: Minnie Mouse,Stock:0,Color: Minnie Mouse,Color: Minnie Mouse,Price: US$ The Garmin Vivofit Jr 2, is an activity tracker for children; available in several colorful designs to fit their style. The Vivofit Jr 2 is a rugged design and can withstand the life of a child, the watch syncs with the free mobile app (which features a matching design to the watch). The parent app has parental functions such as chore management, and scheduled alerts; your child advances through the app, by completing daily activity goals. Set targets and goals for your children and monitor their progress, in a fun high-tech method. Available in a stretchy silicone band for smaller wrists of up to 147mm (4~7 yrs of age) and an adjustable band for older children (6 yrs and above). Price: US$ Price (inc tax): US$ /403

391 Name: Garmin Vivomove HR Ref: Manufacturer: Garmin Color: Black/Rose Gold,Stock:0,Color: Black/Rose Gold,Color: Black/Rose Gold,Price: US$ Color: Rose Gold/White,Stock:0,Color: Rose Gold/White,Color: Rose Gold/White,Price: US$ Color: Black,Stock:0,Color: Black,Color: Black,Price: US$ The Garmin Vivomove HR is a stylish hybrid smartwatch, mix the best of both worlds; with traditional hands and a digital display. Featuring wrist-based heart rate monitoring, and wellness tools to help manage your life; and fitness. The Vivomove HR can display steps, floors, calories, distance traveled, heart rate and intensity minutes, plus more. Using the Garmin Move IQ, the Vivomove automatically starts and stops the activity timer as you begin your activity; for even easier use. Sync the Vivomove with your phone using the Garmin Connect app, and receive all your SMS, , social media, etc notifications directly on your watch. Share your activities, set challenged for yourself or challenge friends; all through Garmin Connect. Price: US$ Price (inc tax): US$ /403

392 Name: Garmin Vivomove HR Premium Ref: Manufacturer: Garmin Color: Black/Silver,Stock:0,Color: Black/Silver,Color: Black/Silver,Price: US$ Color: Gold/Gold,Stock:0,Color: Gold/Gold,Color: Gold/Gold,Price: US$ The Garmin Vivomove HR Premium is an even more stylish version of the Vivmove HR hybrid smartwatch, mix the best of both worlds; with traditional hands and a digital display. The premium version has a genuine leather strap and premium materials such as rose gold. Featuring wrist-based heart rate monitoring, and wellness tools to help manage your life; and fitness. The Vivomove HR can display steps, floors, calories, distance traveled, heart rate and intensity minutes, plus more. Using the Garmin Move IQ, the Vivomove automatically starts and stops the activity timer as you begin your activity; for even easier use. Sync the Vivomove with your phone using the Garmin Connect app, and receive all your SMS, , social media, etc notifications directly on your watch. Share your activities, set challenged for yourself or challenge friends; all through Garmin Connect. Price: US$ Price (inc tax): US$ /403

393 Name: Garmin Vivosport Ref: Manufacturer: Garmin Color: Limelight (Large),Stock:0,Color: Limelight (Large),Color: Limelight (Large),Price: US$ Color: Fuchsia,Stock:0,Color: Fuchsia,Color: Fuchsia,Price: US$ Color: Slate (Large),Stock:0,Color: Slate (Large),Color: Slate (Large),Price: US$ Color: Slate,Stock:0,Color: Slate,Color: Slate,Price: US$ The Garmin Vivosport is a smart activity tracker with built-in wrist-based heart rate measurement and GPS. Fitness monitoring tools such as VO2 max and fitness age estimates and stress tracking helps you keep in touch with your body. The watch features an always-on Garmin Chroma color display and a slim profile in a silicone watch band. Pair the watch to your mobile phone to get access to a full suite of smart features. Get SMS, , social media notifications and more as well as automatically connecting to Garmin Connect to sync your activities. Price: US$ Price (inc tax): US$ /403

394 Name: Garmin Vivofit Jr 2 (Adjustable) Ref: Manufacturer: Garmin Color: Captain America,Stock:0,Price: US$ Color: Minnie Mouse,Stock:0,Price: US$ Color: First Order,Stock:0,Price: US$ Color: The Resistance,Stock:0,Price: US$ The Garmin Vivofit Jr 2, is an activity tracker for children; available in several colorful designs to fit their style. The Vivofit Jr 2 is a rugged design and can withstand the life of a child, the watch syncs with the free mobile app (which features a matching design to the watch). The parent app has parental functions such as chore management, and scheduled alerts; your child advances through the app, by completing daily activity goals. Set targets and goals for your children and monitor their progress, in a fun high-tech method. Available in a stretchy silicone band for smaller wrists of up to 147mm (4~7 yrs of age) and an adjustable band for older children (6 yrs and above) 130mm to 175mm wrist. Price: US$ Price (inc tax): US$ /403

395 Name: Garmin Vivosmart 3 Ref: Manufacturer: Garmin Color: Black/Silver,Stock:0,Color: Black/Silver,Color: Black/Silver,Price: US$ Color: Blue/Silver,Stock:0,Color: Blue/Silver,Color: Blue/Silver,Price: US$ Color: Purple/Rose Gold,Stock:0,Color: Purple/Rose Gold,Color: Purple/Rose Gold,Price: US$ Color: Black/Rose Gold,Stock:0,Color: Black/Rose Gold,Color: Black/Rose Gold,Price: US$ Garmin Vivosmart 3 is a smart activity tracker with built-in wrist-based heart rate monitoring and fitness monitoring tools. The watch can monitor your VO2, fitness age, and strength training, while also monitoring your wellness by tracking your stress. Vivosmart 3 can track steps, floors climbed, calories burnt, activity intensity, sleep and more. Featuring a low profile design, a hidden display to make it less conspicuous; perfect wear for office to the gym. With monitoring the HRV (heart rate variability) the Vivosmart 3 is able to monitor your stress level during your day, to help you improve overall wellness. Receive notifications from your mobile phone, by pairing it to the Vivosmart 3; and share your experiences and set challenges with the Garmin Connect app. Price: US$ Price (inc tax): US$ /403

396 Name: 3mm Mens Shorty Wetsuit Ref: Manufacturer: Aropec Size: M,Stock:1,Size: M,Size: M,Price: US$ Size: L,Stock:1,Size: L,Size: L,Price: US$ Size: XL,Stock:1,Size: XL,Size: XL,Price: US$ Size: S,Stock:1,Size: S,Size: S,Price: US$ This wetsuit is made from 3mm thick fine-mesh neoprene at the cheat; with 2mm neoprene at the back, arms and legs. It features 'Skin seal' at the legs and arm openings and an adjustable neckline with a velcro strap. The shorty has a waist-length zipper at the back, with a nylon webbing extension for easy selfclosing. All stitching is flatlock to ensure there the suit is non-chafing when in use. The suit is suitable for all kinds of water sports, in warm waters. Price: US$ Price (inc tax): US$ /403

397 Name: DS1000 N Head Ref: Manufacturer: Diving Solutions (Asia) LLP A narrow beam, 900 lumen version of our favourite DS350 mini LED torch. As with all our DS350/1000 torches the heads are interchangable, this head is great for a primary night diving light, or as a good backup for tech divers. Price: US$ Price (inc tax): US$ /403

398 Name: DS1000 W Head Ref: Manufacturer: Diving Solutions (Asia) LLP Replacement head for our DS range of torches, this head offers a wide angle beam suitable for close up photography/video work or as a spotting light. Price: US$ Price (inc tax): US$ /403

399 Name: DS Mini 1000N Ref: Manufacturer: Diving Solutions (Asia) LLP Accessories - Charger: NO Charger,Stock:10,Accessories - Charger: NO Charger,Accessories Charger: NO Charger,Price: US$ Accessories - Charger: Double Charger,Stock:10,Accessories - Charger: Double Charger,Accessories - Charger: Double Charger,Price: US$ Accessories - Charger: Single Charger,Stock:0,Accessories - Charger: Single Charger,Accessories - Charger: Single Charger,Price: US$ This DS Mini N1000 torch is a Diving Solution brand torch and is the brightest of the range. It is a fantastic product for recreational night diving and as a backup torch for technical divers. It provides a powerful arrow beam, which makes it a great torch for diving in dark places. This torch is of a very compact design making it practical to carry in a pocket and in one hand. It is made of aluminum that has been anodized coated therefore ensuring its resistance to corrosion and durability. Moreover, it is sealed by a double o-ring placed between the head and the body of the torch and is designed with an extra long thread to ensure maximum protection against flooding. It has a battery life of 2 hours, a maximum depth of 200m, and produces a brightness of 1000 Lumens! It also comes with 2 Lithium batteries and 1 charger. DATASHEET Download Price: US$ Price (inc tax): US$ /403

400 Name: Pelican Headlight 2760 Ref: Manufacturer: Pelican Color: Red,Stock:1,Color: Red,Color: Red,Price: US$ Color: Black,Stock:1,Color: Black,Color: Black,Price: US$ The Pelican 2760 is a lightweight, tough and bright multiple lighting headlight. Great for lighting trails while walking, running or cycling; the AAA batteries offer a quick way to change batteries on the go. The light is operated using a single press button, that cycles through High, Medium, Low and Downcase modes. This head-mounted LED light; it operates using 3 AAA batteries which give a burn time of 90 mins at 289 Lumens. NOTE: this light is IPX6 rated (splashproof), and not suitable for diving. Price: US$ Price (inc tax): US$ /403

401 Name: Pelican Headlight 2750 Ref: Manufacturer: Pelican Color: Glow-in-dark,Stock:1,Color: Glow-in-dark,Color: Glow-in-dark,Price: US$ Color: Black,Stock:1,Color: Black,Color: Black,Price: US$ The Pelican 2750 is a lightweight and tough with a red night vision LED. Great for lighting trails while walking, running or cycling; the AAA batteries offer a quick way to change batteries on the go. The light is operated using a single press button, that cycles through High and Low modes. This head-mounted LED light; it operates using 3 AAA batteries which give a burn time of 90 mins at 259 Lumens. NOTE: this light is IPX6 rated (splashproof), and not suitable for diving. Price: US$ Price (inc tax): US$ /403

402 Name: Pelican Headlamp 2720 Ref: Manufacturer: Pelican Stock: 1 The Pelican 2720 has Gesture Activation Control, Variable Light Output, and Dual Red LEDs. With the gesture control, just swipe your hand in front of the light to turn on or adjust brightness etc. Perfect for lighting trails while walking, running or cycling; the AAA batteries offer a quick way to change batteries on the go. Swipe operated, it that cycles through High and Low. This head-mounted LED light; it operates using 3 AAA batteries which give a burn time of 180 mins at 200 Lumens. NOTE: this light is IPX6 rated (splashproof), and not suitable for diving. Price: US$ Price (inc tax): US$ /403