AIR CHUCKS, TIRE GAUGES AND INFLATOR GAUGES

Size: px
Start display at page:

Download "AIR CHUCKS, TIRE GAUGES AND INFLATOR GAUGES"

Transcription

1 Series AIR CHUCKS, TIRE GAUGES AND INFLATOR GAUGES Standard Air Chucks 374 Flow-Thru Air Chucks 375 Standard Pencil Tire Gauges 376 Dual Foot Tire Gauges 377 Dial Tire Gauges 378 Digital Tire Gauges 379 Tire Inflator Gauges 380 Tire Service Tools 386 w w w. T O P R I N G. c o m 372

2 AIR CHUCKS, TIRE GAUGES AND INFLATOR GAUGES THE IMPORTANCE OF PROPER TIRE INFLATION S Tire pressure has a direct influence on tire life. When inflated to manufacturers recommendations, tires will provide optimal performance; on the other hand, incorrect inflation will cause abnormal and/or premature wear. While overinflation causes certain damage, this wear is even more pronounced for underinflation, not to speak of increased gas consumption. Maximum allowable pressure is usually indicated on the sidewall of the tire; as a rule, pressures for automobile tires should be around 35 PSI, compared to racing bicycles, for example, which use roughly 120 PSI. Under-inflation Pressure Tire Life -20% 75% -30% 50% -40% 35% INFLATION AND WEAR... Over-inflation Pressure Tire Life +20% 90% It is recommended that tire pressure be checked once per month and/or before any long trip, both for safety reasons and to reduce tire wear and gas consumption. offers 4 different types of tools for checking tire pressure: Pencil-type tire gauges Dial tire gauges Digital tire gauges Inflator gauges TECH TIP All air chucks, tire gauges and inflator gauges are compatible with Nitrogen used to inflate tires Dial inflator gauges make maintaining ideal tire pressure very easy. 373

3 S AIR CHUCKS, TIRE GAUGES AND INFLATOR GAUGES STANDARD AIR CLOSED CHUCKS These chucks have a built-in shut off valve to stop airflow when chuck is not in use TECH TIP BALL FOOT AIR CHUCKS Description.130 1/4 (F) NPT.133 1/4 Hose Barb.135 1/4 (M) NPT.137 1/4 INDUSTRIAL.138 ARO ULTRAFLO DUAL FOOT AIR CHUCK Closed Chuck Length: 6" Angled head can inflate either side Extended chuck for hard-to-reach tire valves, (ie: trucks, buses, and tractors) EXTENDED DUAL FOOT AIR CHUCK Length: 13" Extra long for hard-to-reach tire valves, ie: trucks, buses, and tractors Closed chucks are intended for use on live air lines. They are not intended for inflator gauges or tire installation machines, which control air flow with levers and valves and require flowthru chucks (see following page) Description.140 1/4 (F) NPT BALL FOOT AIR CHUCK AND CLIP Locks onto tire valve while inflating tire Description.110 1/4 (F) NPT TILT LOCK DUAL FOOT CHUCK Length: 6" Straight-on chuck with threaded, deep wheel lock nuts which lock onto valve mouth when tilted Description.150 1/4 (F) NPT AIR CHUCK CLIP Locks chuck onto valve while inflating tire Description.120 1/4 (F) NPT EXTENDED TILT LOCK DUAL FOOT CHUCK Description.160 1/4 (F) NPT Extra long (14") for hard-to-reach tire valves Straight-on chuck with threaded, deep wheel lock nuts which lock onto valve mouth when tilted LOCK-ON AIR CHUCK Securely locks onto valves when pushed forward. Allows serviceman to stand clear for tire inflation Releases when pulled back Description.100 1/4 (F) NPT.245 Dual Foot Lock-On Chuck RIGHT ANGLE DUAL FOOT AIR CHUCK Fits standard and large bore valves Description.170 1/4 (F) NPT Description.620 6" long " long 374

4 AIR CHUCKS, TIRE GAUGES AND INFLATOR GAUGES FLOW-THRU AIR CHUCKS S Open Chuck Without shut off valve For inflation gauges and tire installation machines TECH TIP Open chucks are intended for use on valved air lines, such as those found on inflation gauges and tire machines. They are not intended for live air lines, as air will flow freely through them once pressurized (see preceding page for closed chucks) DUAL FOOT AIR CHUCK 6" long BALL FOOT AIR CHUCK AND CLIP Locks onto valve For hard-to-reach tire valves, ie: trucks, buses, and tractors Description.240 1/4 (F) NPT EXTENDED DUAL FOOT AIR CHUCK Description.210 1/4 (F) NPT 13" long For hard-to-reach tire valves, ie: trucks, buses, and tractors Description.250 1/4 (F) NPT HEX BALL FOOT AIR CHUCK Description.230 1/4 (F) NPT CLIP-ON AIR CHUCK Firmly locks onto valve Description.205 1/4 hose barb 375

5 S AIR CHUCKS, TIRE GAUGES AND INFLATOR GAUGES STANDARD TIRE GAUGES PENCIL TYPE FEATURES All pencil type tire gauges have a precision-engineered Brass chuck to ensure gauge fits squarely on the valve. This prevents air leakage and guarantees accurate pressure readings Easy to read and use All gauges have a permanent deflating pin to release excess air All models have a tough, Chrome plated finish All models use a 4-sided indicator bar for easy pressure readings STANDARD TIRE GAUGE Dual calibration in PSI and kpa 2 sides calibrated from 5 to 50 PSI in 1 PSI increments 2 sides calibrated from 75 to 340 kpa Ideal for automobiles and light trucks TRACTOR AIR/LIQUID TIRE GAUGE Stainless Steel spring Calibrated from 5 to 50 PSI in 1 PSI increments Specially designed for air or liquid filled tires MINI TIRE GAUGE Compact size Calibrated from 10 to 50 PSI in 1 PSI increments Ideal for automobiles and light trucks Chuck Permanent deflating pin to allow release of excess air STRAIGHT CHUCK TIRE GAUGE Calibrated from 10 to 50 PSI in 1 PSI increments Ideal for automobiles and light trucks.330 HIGH-PRESSURE TIRE GAUGE 2 sides calibrated from 20 to 120 PSI in 2 PSI increments 2 sides calibrated from 150 to 820 kpa High pressure bicycle and motorcycles tires.410 EXTRA-LOW PRESSURE TIRE GAUGE Specially designed for applications requiring accurate low pressure readings Calibrated from 1 to 20 PSI in 1/2 PSI increments All terrain vehicles, air lifts, garden tractors, air shocks, etc..460 LARGE BORE STRAIGHT-ON TIRE GAUGE Fits standard and large bore valves Calibrated PSI in 2 PSI increments

6 AIR CHUCKS, TIRE GAUGES AND INFLATOR GAUGES DUAL FOOT TIRE GAUGES FOR TRUCKS AND BUSES HIGH-PRESSURE DUAL FOOT TIRE GAUGE (PENCIL TYPE) 4-sided Nylon indicator bar Calibrated from 20 to 120 PSI in 2 PSI increments S FEATURES All dual foot truck tire gauges have precision-engineered Brass chuck guides to ensure gauge fits squarely on the valve This prevents air leakage and guarantees accurate pressure readings All models have a tough, Chrome plated finish DUAL FOOT SERVICE TIRE GAUGE (NYLON BAR) Constructed for high pressure applications, especially suited for heavy duty environments 2-sided Nylon indicator bar Calibrated from 10 to 150 PSI in 2 PSI increments, numbers at 10 PSI intervals with 5 PSI markers between 6" extension to reach inside and outside wheels Approx. 12" long DUAL FOOT SERVICE TIRE GAUGE (ALUMINIUM BAR) 2-sided Aluminium indicator bar Calibrated from 10 to 160 PSI in 2 PSI increments, numbers at 10 PSI intervals with 5 PSI markers between 6" extension to reach inside and outside wheels Approx. 12" long.545 DUAL STRAIGHT CHUCK SERVICE TIRE GAUGE 2-sided Nylon indicator bar Straight-on chuck head with a 30 reverse angle chuck for inside and outside tandem wheels Calibrated from 10 to 150 PSI in 2 PSI increments Approx. 12" long.570 SWIVEL FOOT LARGE BORE TIRE GAUGE For large bore valves Swivel chuck adjusts to straight push-on or right angle, works on valves with shields Calibrated PSI in 2 PSI increments Approx. 9" long.610 MASTER TEST PRESSURE TIRE GAUGE All tire gauges can eventually become inaccurate and contaminated. Checking gauges annually with the Master gauge assures gauge accuracy Designed and calibrated to the highest degree of accuracy Calibrated from 10 to 165 PSI in 2 PSI increments, with numbers at 10 PSI intervals with 5 PSI markers between Nylon indicator bar THIS INSTRUMENT IS NOT INTENDED FOR REGULAR CHECKING OF TIRES

7 S AIR CHUCKS, TIRE GAUGES AND INFLATOR GAUGES DIAL TIRE GAUGES FEATURES Durable Steel case with polished Brass bezel and 2" dial Designed to stay accurate Excellent for all types of passenger vehicles Full geared, solid Brass precision movement with Bronze bourdon tube. Unlike piston-plunger-type gauges, bourdon tube is not affected by changes in temperature, humidity or altitude Pressure readings are held until the release button is depressed Bleeder button also releases excess air to exact desired pressure Include protective Rubber gauge guard STRAIGHT CHUCK SWIVEL ANGLE CHUCK Air Chuck.590 Straight (0-60 PSI) Air Chuck.582 Swivel angle (0-160 PSI) DUAL FOOT CHUCK Air Chuck.583 Dual Foot (5-160 PSI) STRAIGHT CHUCK (WITH FLEXIBLE HOSE) 11" hose for hard-to-reach tire valves Air Chuck.589 Straight (2-60 PSI) 378

8 AIR CHUCKS, TIRE GAUGES AND INFLATOR GAUGES MAXPRO DIGITAL TIRE GAUGE S Reads from 2 to 100 PSI Displays in increments of 0.5 PSI Auto shut off Digital accuracy of ± 1% Streamlined ergonomic shape Lightweight and compact size.0 DIGITAL TIRE GAUGES Read from 2 to 150 PSI Display in increments of 0.5 PSI Calibration in PSI, bar, kpa, and kg/cm 2 Backlit LCD display for easy reading Digital accuracy of ± 0.5 PSI Auto shut off Replaceable battery Chuck.640 Ball Foot.642 Dual Foot 379

9 S AIR CHUCKS, TIRE GAUGES AND INFLATOR GAUGES DIGITAL LEVER-TYPE INFLATOR GAUGE BENEFITS Provides accurate readings for proper tire inflation at a glance Fast inflation and deflation, saves time and money Easy to read, easy to use Long inflation hose and Clip-On chuck allow user to keep a safe distance from tire FEATURES High speed inflation and deflation rates Large, easy to read backlit LCD digital display Calibrated from 0 to 100 PSI in 0.1 PSI increments 3 in 1 function: inflates, releases air, and measures tire pressure Air pressure may be set without touching tire or valve core Large, separate backlight and reset buttons Gauge encased in a Rubber cushion for long lasting service 6' flexible hose with Clip-On chuck 250 PSI overpressure warning Low battery warning light SPECIFICATIONS Maximum Inlet Pressure 250 PSI Working Temperature Range 32 F to 176 F (0 C to 80 C) Air Inlet 1/4 (F) NPT Battery Type CR2450 Weight 3.3 lb (1.5 kg) Prod. No Description.660 Digital Tire Inflator Gauge 380

10 AIR CHUCKS, TIRE GAUGES AND INFLATOR GAUGES COMPACT DIGITAL LEVER-TYPE INFLATOR GAUGE BENEFITS Provides accurate readings for proper tire inflation at a glance Fast inflation and deflation, saves time and money Easy to read, easy to use FEATURES Large, easy to read LCD digital display Calibrated from 5 to 150 PSI in 0.5 PSI increments 3 in 1 function: inflates, releases air, and measures tire pressure Air pressure may be set without touching tire or valve core Heavy duty cast handle encased in oil-resistant Rubber cover Gauge encased in an oil resistant Rubber cushion for long lasting service 48" flexible hose with Clip-On chuck S SPECIFICATIONS Maximum Inlet Pressure 250 PSI Working Temperature Range 32 F to 104 F (0 C to 40 C) Air Inlet 1/4 (F) NPT Batteries Type CR2032 Hose Prod. Length Air No in Chuck Clip-On HEAVY DUTY LEVER TYPE DIAL INFLATOR GAUGE BENEFITS Rugged, heavy duty design for long service life Provides accurate readings for proper tire inflation at a glance Fast inflation and deflation, saves time and money Easy to read, easy to use FEATURES Large 3-1/2" dial is easy to read Calibrated from 0 to 160 PSI in 2 PSI increments 3 in 1 function: inflates, releases air, and measures tire pressure Air pressure may be set without touching tire or valve core Heavy duty cast body Gauge encased in Rubber cushion for long lasting service 48" flexible hose with Clip-On chuck Wire hanging hook SPECIFICATIONS Maximum Inlet Pressure 210 PSI Working Temperature Range 32 F to 104 F (0 C to 40 C) Air Inlet 1/4 (F) NPT Hose Prod. Length Air No in Chuck Clip-On 381

11 S AIR CHUCKS, TIRE GAUGES AND INFLATOR GAUGES STRAIGHT AIR CHUCK LEVER TYPE BAYONET INFLATOR GAUGE 3 in 1 function: inflates, releases air and measures tire pressure 3-sided Brass indicator Small straight chuck Calibrated PSI in 2 PSI increments 12" flexible hose Air chuck.600 Straight LEVER TYPE BAYONET INFLATOR GAUGES 3 in 1 function: inflates, releases air and measures tire pressure 3-sided Brass indicator Calibrated PSI in 2 PSI increments 12" flexible hose Ball Foot Chuck Air Chuck.601 Dual Foot.602 Ball Foot LEVER TYPE DIAL INFLATOR GAUGES Excellent all-purpose inflation gauges Allows user to keep a safe distance while inflating or deflating tires 3 in 1 function: inflates, releases air, and measures tire pressure Air pressure may be set without touching tire or valve core Rugged Brass body Large, easy to read 2" dial gauge calibrated PSI (0-11 bar) Gauge encased in a Rubber cushion for long lasting service Anti-vibration safety valve for pressure gauge.657 Dual Foot Chuck.655 Hose Prod. Length Air No in Chuck Clip-On Clip-On Dual Foot.670 1/4 NPT Replacement Gauge " Replacement Hose.686 Replacement Connector 382

12 AIR CHUCKS, TIRE GAUGES AND INFLATOR GAUGES PISTOL GRIP DIAL INFLATOR GAUGES Excellent all-purpose inflation gauge Air pressure may be set without touching tire or valve core 3-in-1 function: inflates, releases air and measures tire pressure Rugged Brass body Large, easy-to-read 2" dial gauge calibrated PSI (0-15 bar) Gauge encased in a Rubber cushion for long lasting service 12" flexible hose.664 S Air Chuck.664 Dual Foot.665 Clip-On.665 With Clip-On.666 Replacement Gauge LEVER TYPE WINDOW INFLATOR GAUGE Heavy-duty gauge for passenger and truck tires 3-in-1 function: inflates, and measures tire pressure Easy-to-read accuracy magnifying lens window Thin-line indicator ring allows full view of scale calibrated PSI in 2 PSI increments (0-11 bar) 15" flexible hose with dual foot chuck Magnifying Lens Window Air Chuck.658 Dual Foot LEVER TYPE DIAL INFLATOR GAUGE Excellent all-purpose inflation gauge 3-in-1 function: inflates, releases air and measures tire pressure Large, easy-to-read 2" dial gauge calibrated PSI Gauge encased in a Rubber cushion for long lasting service 12" flexible hose with Brass ball foot air chuck Air Chuck.659 Ball Foot.666 Replacement Gauge.668 Replacement Hose 383

13 S AIR CHUCKS, TIRE GAUGES AND INFLATOR GAUGES AIRPRO INFLATOR GAUGES Allow user to keep a safe distance while inflating or deflating tires Long extension allows user to work standing up (diminishing back injuries) Integrated valve allows slow release of tire pressure to desired level Rugged construction for everyday use TECH TIP Safety regulations require the operator to stay out of the way of inflating tires, which may explode. The 6' hose of these inflators allow the operator to stay out of harm's way AIRPRO DUAL FOOT INFLATOR GAUGE (WITH SAFETY LOCK-ON AIR CHUCK) Maximum working pressure: 120 PSI Excellent all-purpose inflation gauge Large, easy-to-read 2" dial gauge calibrated PSI (0-10 bar) Gauge encased in a Rubber cushion for long lasting service Easy to hang up 72" flexible hose with safety lock-on air chuck APPLICATIONS Trucks Buses Tractors Air Chuck.652 Lock-On.671 Replacement Gauge.672 Rubber Protector AIRPRO PROFESSIONAL STRAIGHT CHUCK INFLATOR GAUGE Equiped with a valve ensuring that gauge will only be exposed to the pressure from tire. This protects the gauge from unnecessary pressure surges and shocks Excellent all-purpose inflation gauge Large, easy-to-read 2 1 2" dial gauge calibrated PSI (0-10 bar) Gauge encased in a Rubber cushion for long lasting service Easy to hang up 72" flexible hose with Clip-On air chuck APPLICATIONS Cars and trucks Motorcycles and bicycles RVs Vans Racing vehicles Air Chuck.645 Clip-On.673 Replacement Gauge 384

14 AIR CHUCKS, TIRE GAUGES AND INFLATOR GAUGES AIRPRO INFLATOR GAUGES Accurate inflation Will both inflate and deflate Dial gauge Perfect for everyday use Release valve allows bleeding to exact tire pressure desired TECH TIP Correct tire pressure means increased car safety and performance, better fuel economy and longer tire life S AIRPRO CLIP-ON CHUCK INFLATOR GAUGE Maximum working pressure: 120 PSI Excellent all purpose inflation gauge Large, easy to read 2" dial gauge calibrated PSI (0-10 bar) Gauge encased in a Rubber cushion for long lasting service Easy to hang up 72" flexible hose with Clip-On air chuck APPLICATIONS Cars and trucks Motorcycles and bicycles RVs Vans Racing vehicles Air Chuck.651 Clip-On.671 Replacement Gauge.672 Rubber Protector.682 Replacement Hose AIRPRO DUAL FOOT INFLATOR GAUGE Maximum working pressure: 145 PSI Excellent all purpose inflation gauge Large, easy to read 2" dial gauge calibrated PSI (0-10 bar) Gauge encased in a Rubber cushion for long lasting service Easy to hang up 18" flexible hose with dual foot air chuck APPLICATIONS Trucks Buses Tractors Air Chuck.653 Dual Foot.671 Replacement Gauge.672 Rubber Protector 385

15 S AIR CHUCKS, TIRE GAUGES AND INFLATOR GAUGES TIRE SERVICE TOOLS TIRE TREAD DEPTH GAUGE A handy tool that quickly and accurately tells how much tire tread is left on the tire Large tread platform with round probing pin Calibrated in 1/32" units and millimeters Convenient pocket clip.700 TIRE VALVE REPAIR TOOL Repairs inside and outside valve threads, inserts and removes cores from valves Corrosion-resistant finish Case hardened.900 VALVE CORE EXTRACTOR For inserting and removing tire valve cores Safety-grip handle with case-hardened and plated core 4-3/8" long.930 TIRE VALVE INSTALLATION TOOL Installs any length tubeless tire valve in any rim

16 BOXES OF SAVINGS discounts up to 20% Off! Buy products in bulk or pre-established quantities and take advantage of discounts of up to 20 % off your regular price. UP TO 20% OFF YOUR REGULAR PRICE Contact your Representative or Customer Service for more information on products available with quantity discounts

High Precision Gauge Pressure Indicators

High Precision Gauge Pressure Indicators Series 1500 8½" Dial High Precision Gauge Pressure Indicators Series 1500 Gauges have capsule-type pressure elements up to and including the 150-psig range. Ranges of 200 psig and above have Bourdon tubes.

More information

Tire Inflation Cage Kit For servicing only single piece automotive, and most light truck tire/wheel assemblies

Tire Inflation Cage Kit For servicing only single piece automotive, and most light truck tire/wheel assemblies Tire Inflation Cage Kit 85608214 For servicing only single piece automotive, and most light truck tire/wheel assemblies This is a supplement to your operating manual and covers the setup and use of the

More information

With or without proof of conformity.

With or without proof of conformity. 477.11 Digital automatic tire inflator airmate / pneumate With or without proof of conformity. The digital stationary tire inflator facilitate filling and testing of car- (max. 5.5 bar filling pressure)

More information

FILTER TYPE PRESSURE SNUBBER

FILTER TYPE PRESSURE SNUBBER FILTER TYPE PRESSURE SNUBBER Pressure oscillations and other sudden pressure changes can affect the delicate mechanisms of a pressure gauge or pressure transmitter. This can result in either complete failure

More information

Test pumps. Pressure sources. Good reasons for proper and reliable calibration

Test pumps. Pressure sources. Good reasons for proper and reliable calibration Test pumps Pressure is one of the most commonly measured quantities in engineering, which is why exact and reliable pressure measurement is especially important. However, the characteristics of the even

More information

450P- RV AUTOMATIC PORTABLE COMPRESSOR EXTREME SERIES

450P- RV AUTOMATIC PORTABLE COMPRESSOR EXTREME SERIES 450P- RV AUTOMATIC PORTABLE COMPRESSOR EXTREME SERIES PART NO. 45053 IMPORTANT: It is essential that you and any other operator of this product read and understand the contents of this manual before installing

More information

3/8" Dr. Air Butterfly Impact Wrench

3/8 Dr. Air Butterfly Impact Wrench 8192106 3/8" Dr. Air Butterfly Impact Wrench Owner s Manual Read and understand all instructions before use. Retain this manual for future reference. Specifications Construction: Polished aluminum and

More information

Buying more than 11 gauges? Call Lesman for additional discounts.

Buying more than 11 gauges? Call Lesman for additional discounts. Low Cost Liquid Filled Pressure Gauges Size: 1.5", 2", and 2.5" Accuracy: 2.5% of full scale Materials: Case and ring: 304 stainless steel; Window: Polycarbonate; Seals: Buna-N; Pointer: Black-finished

More information

MODEL NUMBER: P-A AUTOMATIC PORTABLE COMPRESSOR

MODEL NUMBER: P-A AUTOMATIC PORTABLE COMPRESSOR MODEL NUMBER: 45043-450P-A AUTOMATIC PORTABLE COMPRESSOR IMPORTANT: It is essential that you and any other operator of the product read and understand the contents of this manual before installing and

More information

SPECIALIZED AND GENERAL USE GAUGES

SPECIALIZED AND GENERAL USE GAUGES EDITION 66 CATALOG SPECIALIZED AND GENERAL USE 99 Washington Street Melrose, MA 02176 Phone 781-665-1400 Toll Free 1-800-517-8431 Visit us at www.testequipmentdepot.com VACUUM AND HOSE ADAPTERS, HOSES

More information

450P AUTOMATIC PORTABLE COMPRESSOR EXTREME SERIES

450P AUTOMATIC PORTABLE COMPRESSOR EXTREME SERIES EXTREME SERIES PART NO. 45043 IMPORTANT: It is essential that you and any other operator of this product read and understand the contents of this manual before installing and using this product. SAVE THIS

More information

ACME Connectors and Fittings Extended Type Hose Couplings for Vapor and Liquid Service A7571 and A7575 Series

ACME Connectors and Fittings Extended Type Hose Couplings for Vapor and Liquid Service A7571 and A7575 Series M onnectors and Fittings xtended Type Hose ouplings for Vapor and Liquid Service 7571 and 7575 Series esigned especially for liquid filling and vapor equalization of LP-Gas and anhydrous ammonia. The limited

More information

Air Grinders - Angle

Air Grinders - Angle Screwdriving technology Automation Air motors Air tools Air Grinders - Angle without gearing /// with gearing with vane/turbine motor For grinding wheels Ø 100, 115, 125, 150, 180, 230 mm Power output:

More information

400H HARDMOUNT AIR COMPRESSOR KIT PART NO H HARDMOUNT AIR COMPRESSOR KIT PART NO

400H HARDMOUNT AIR COMPRESSOR KIT PART NO H HARDMOUNT AIR COMPRESSOR KIT PART NO 400H HARDMOUNT AIR COMPRESSOR KIT PART NO. 40042 450H HARDMOUNT AIR COMPRESSOR KIT PART NO. 45042 400H 450H IMPORTANT: It is essential that you and any other operator of this product read and understand

More information

Tech. Services: (800) Fax: (800) Order Entry: (800) Fax: (800) MODEL D INFLATABLE JACKS

Tech. Services: (800) Fax: (800) Order Entry: (800) Fax: (800) MODEL D INFLATABLE JACKS SPX Corporation 5885 11th Street Rockford, IL 6119-3699 USA Internet Address: http://www.powerteam.com Tech. Services: (8) 477-8326 Fax: (8) 765-8326 Order Entry: (8) 541-1418 Fax: (8) 288-731 Parts List

More information

Impact Wrenches. Impact & Ratchet. Wrenches. CP7759Q p.13. See the unique

Impact Wrenches. Impact & Ratchet. Wrenches. CP7759Q p.13. See the unique Impact & Ratchet Wrenches See the unique CP7759Q p.13 P remium Tool 7 Impact & Ratchet Wrenches blows to a fastener, producing torque. The advantage of impact wrenches is the high power-to-weight ratio,

More information

Binks SG-2 Plus TM Rotary 2 QT. PRESSURE CUP

Binks SG-2 Plus TM Rotary 2 QT. PRESSURE CUP Binks SG-2 Plus TM Rotary 2 QT. PRESSURE CUP Model No. 80-651 Rotary Agitator INTRODUCTION Binks SG-2 TM Plus Rotary 2 Qt. Pressure Cup is ideal for component spraying and industrial applications where

More information

SPECIFICATIONS. Approximate Weight: 10 oz. Surface Finish: Ra micro inch or less MATERIALS OF CONSTRUCTION

SPECIFICATIONS. Approximate Weight: 10 oz. Surface Finish: Ra micro inch or less MATERIALS OF CONSTRUCTION DIFFUSION-RESISTANT, DIAPHRAGM SEAL, EXCESS FLOW SHUT-OFF VALVES (FS SERIES) FS Series Excess Flow Shut-Off Valves are designed to automatically shut-off the delivery of gas in a line if the flow exceeds

More information

RegO Adapters, Connector, & Fittings

RegO Adapters, Connector, & Fittings RegO dapters, onnector, & Fittings Extended Type ouplings for Vapor and Liquid Service esigned especially for liquid filling and vapor equalization of LP-Gas and anhydrous ammonia. The limited travel of

More information

Binks SG-2 Plus TM 2 QT. PRESSURE CUPS Model No (Standard) Model No (with OscillatingAgitator)

Binks SG-2 Plus TM 2 QT. PRESSURE CUPS Model No (Standard) Model No (with OscillatingAgitator) INTRODUCTION Binks SG-2 Plus TM Pressure Cup is ideal for component spraying and industrial applications where small batch production spraying is required. The 2 qt. capacity is sufficient to complete

More information

12V AIR STATION ALL-IN-ONE

12V AIR STATION ALL-IN-ONE [ACT 027] Manual E 6/9/05 10:18 PM Page 3 Multi use 12V AIR STATION ALL-IN-ONE OWNER S MANUAL MODEL NO: C71A-54 KEEP THE ORIGINAL BOX, PACKAGING AND RECEIPT. BEFORE OPERATING THIS UNIT, READ THE MANUAL

More information

Discontinued. Powers Controls. Technical Instructions Document No P25 RV Rev. 1, May, RV 201 Pressure Reducing Valves.

Discontinued. Powers Controls. Technical Instructions Document No P25 RV Rev. 1, May, RV 201 Pressure Reducing Valves. Powers Controls RV 201 Pressure Reducing Valves Description Features Product Numbers Dual Pressure PRV Technical Instructions Document No. 155-049P25 RV 201-1 Single Pressure PRV The RV 201 Pressure Reducing

More information

ATHLETICS Track & Field Equipment

ATHLETICS Track & Field Equipment ATHLETICS Track & Field Equipment Aluminium Curbing Order No. 11260 The aluminium curbing is made from special made anodized aluminium profiles. It is a mobile marker and separator of the running track.

More information

Model PSI Compressor with 3-Gallon Air Tank 12VDC

Model PSI Compressor with 3-Gallon Air Tank 12VDC Model 6350 150 PSI Compressor with 3-Gallon Air Tank 12VDC IMPORTANT: It is essential that you and any other operator of this product read and understandd the contents of this manual before installing

More information

444C DUAL PERFORMANCE VALUE PACK

444C DUAL PERFORMANCE VALUE PACK (Chrome) PART NO. 44432 IMPORTANT: It is essential that you and any other operator of this product read and understand the contents of this manual before installing and using this product. SAVE THIS MANUAL

More information

TWIN CYLINDER RAPID INFLATOR With Direct Battery Connection

TWIN CYLINDER RAPID INFLATOR With Direct Battery Connection Model no. 009-5032-6 TWIN CYLINDER RAPID INFLATOR With Direct Battery Connection IMPORTANT: Questions, problems, missing parts or for technical service? Before returning to your retailer, call our customer

More information

NHR Powder Feed Hopper

NHR Powder Feed Hopper Instruction Sheet P/N 0804A0 NHR-8-50 Powder Feed Hopper Description This instruction sheet provides specifications, installation and operation instructions, and parts lists for the NHR-8-50 powder feed

More information

400C & 450C DUAL PERFORMANCE VALUE PACKS

400C & 450C DUAL PERFORMANCE VALUE PACKS (Chrome) PART NO. 40013 (Silver) PART NO. 45012 (Chrome) PART NO. 45013 IMPORTANT: It is essential that you and any other operator of this product read and understand the contents of this manual before

More information

User Guide for. UTR Turbo Air Lappers Pneumatic Air Grinders & Lappers UTR-30, UTR-70, UR , ,

User Guide for. UTR Turbo Air Lappers Pneumatic Air Grinders & Lappers UTR-30, UTR-70, UR , , User Guide for UTR Turbo Air Lappers Pneumatic Air Grinders & Lappers UTR-30, UTR-70, UR-120 8502250, 8502245, 8502251 We thank you for choosing our products. This guide provides information on general

More information

Electronic Measuring and Calibration Instruments

Electronic Measuring and Calibration Instruments Electronic Measuring and Calibration Instruments Quality by tradition Electronic Measuring and Calibration Instruments Our electronic instruments and calibration equipment product area features instruments

More information

Operation Instruction Manual

Operation Instruction Manual Full Automatic Intelligent Digital Tire Nitrogen Machine FS-6000B Operation Instruction Manual Please read this manual before carrying out any assembly or service procedures. 1 I. Introduction Contents

More information

BIMBAR INFLATABLE PACKERS AND ACCESSORIES

BIMBAR INFLATABLE PACKERS AND ACCESSORIES BIMBAR INFLATABLE PACKERS AND ACCESSORIES Geopro supplies a complete range of inflatable packers in nine different diameters from 28 up to 170mm. All our packers made of BIMBAR rubber technology are reinforced

More information

Dorsey Standard Bore Gages

Dorsey Standard Bore Gages Dorsey Standard Bore Gages A time proven design made better by Dorsey This design of rugged production line bore gages has been an industry standard for more than 75 years. Dorsey offers precise replacement

More information

Pneumatic service kit Model CPG-KITP

Pneumatic service kit Model CPG-KITP Calibration technology Pneumatic service kit Model CPG-KITP WIKA data sheet CT 93.01 Applications Oil and gas industry Maintenance and service facilities Calibration service companies and service industry

More information

Compact Manometer. Pressure measurements can easily be taken any time, anywhere. POWER LIGHT

Compact Manometer. Pressure measurements can easily be taken any time, anywhere. POWER LIGHT Compact Manometer Series PPA Pressure measurements can easily be taken any time, anywhere. G GS PPA Compact and lightweight Portable type with a lightweight of only about 100 g (unit 50 g, battery 50 g)

More information

IMPORTANT SAFETY INSTRUCTIONS

IMPORTANT SAFETY INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS CAUTION - To reduce risk of electrical shock: - Do not disassemble. Do not attempt repairs or modifications. Refer to qualified service agencies for all service and repairs.

More information

Expansion Thermometers Stainless Steel Series, Model 70

Expansion Thermometers Stainless Steel Series, Model 70 Mechanical Temperature Measurement Expansion Thermometers Stainless Steel Series, Model 70 WIKA Data Sheet TM 81.01 Applications General-purpose temperature measuring instruments for gaseous, liquid and

More information

OXYGEN THERAPY FLOWMETERS, REUSABLE AND SINGLE-PATIENT HUMIDIFIERS, PRESSURE REGULATORS, FLOW SELECTORS

OXYGEN THERAPY FLOWMETERS, REUSABLE AND SINGLE-PATIENT HUMIDIFIERS, PRESSURE REGULATORS, FLOW SELECTORS OXYGEN THERAPY The line of oxygen therapy devices includes variable area flowmeters, calibrated holes dial flowmeters, pressure reducers with their cylinder connections, humidifiers, flow selectors and

More information

Model 7989T Steel Pipe Squeezer Sch. 40 & Sch. 80. Operations Manual

Model 7989T Steel Pipe Squeezer Sch. 40 & Sch. 80. Operations Manual 10-12 Steel Pipe Squeezer Sch. 40 & Sch. 80 Operations Manual 1.0 Introduction This manual is issued as a basic operation manual covering the Regent Model 7989T, Pipe Squeezer and Pump as manufactured

More information

Nitrogen Advantage. Better Tire Pressure Retention. Improved Fuel Economy. Extended Tread Life. Elimination of Oxidation. Reduction in Tire Failures

Nitrogen Advantage. Better Tire Pressure Retention. Improved Fuel Economy. Extended Tread Life. Elimination of Oxidation. Reduction in Tire Failures Nitrogen Advantage nitrogen tire inflation system, 4/7/14/21 CFM Better Tire Pressure Retention Improved Fuel Economy Extended Tread Life Elimination of Oxidation Reduction in Tire Failures 2 The Nitrogen

More information

MODEL NUMBER: P PORTABLE COMPRESSOR

MODEL NUMBER: P PORTABLE COMPRESSOR MODEL NUMBER: 44043-440P PORTABLE COMPRESSOR IMPORTANT: It is essential that you and any other operator of the product read and understand the contents of this manual before installing and using this product.

More information

Pressure Gauges. Version 2018 Revised 01/2018

Pressure Gauges. Version 2018 Revised 01/2018 Pressure Gauges Version 2018 Revised 01/2018 Email your order to: sales@polyconn.com or fax to (763) 398-2590. www.polyconn.com. Questions call: (763)559-0388 3062 Ranchview Lane North. Plymouth, MN 55447

More information

Hydraulic pressure balance Model CPB5800

Hydraulic pressure balance Model CPB5800 Calibration technology Hydraulic pressure balance Model CPB5800 WIKA data sheet CT 31.11 for further approvals see page 8 Applications Primary standard for calibrating the pressure scale in a hydraulic

More information

INSTALLATION AND OPERATING INSTRUCTIONS

INSTALLATION AND OPERATING INSTRUCTIONS INSTALLATION AND OPERATING INSTRUCTIONS For 3D Instruments Direct Drive Pressure Gauges 3D Instruments Inc., 15542 Chemical Lane, Huntington Beach, CA, 92649, U.S.A. Tel. (714) 894-5351, Fax. (714) 895-4309

More information

250C-IG COMPRESSOR KIT 12V PART NO C-IG COMPRESSOR KIT 24V PART NO

250C-IG COMPRESSOR KIT 12V PART NO C-IG COMPRESSOR KIT 24V PART NO 250C-IG COMPRESSOR KIT 12V PART NO. 25050 250C-IG COMPRESSOR KIT 24V PART NO. 25058 IMPORTANT: It is essential that you and any other operator of this product read and understand the contents of this manual

More information

MODEL NUMBER: P PORTABLE COMPRESSOR

MODEL NUMBER: P PORTABLE COMPRESSOR MODEL NUMBER: 30033-300P PORTABLE COMPRESSOR IMPORTANT: It is essential that you and any other operator of the product read and understand the contents of this manual before installing and using this product.

More information

250C-IG COMPRESSOR KIT 12V PART NO C-IG COMPRESSOR KIT 24V PART NO

250C-IG COMPRESSOR KIT 12V PART NO C-IG COMPRESSOR KIT 24V PART NO 250C-IG COMPRESSOR KIT 12V PART NO. 25050 250C-IG COMPRESSOR KIT 24V PART NO. 25058 IMPORTANT: It is essential that you and any other operator of this product read and understand the contents of this manual

More information

www.ricelake.com/condec 888-295-8475 UPC5000 PRESSURE CALIBRATION STANDARD Designed for calibrating transmitters, transducers, gauges and other pressure sensitive devices onsite, the portable UPC5000 is

More information

DUAL 444C ONBOARD AIR SYSTEM

DUAL 444C ONBOARD AIR SYSTEM DUAL 444C ONBOARD AIR SYSTEM PART NO. 20019 IMPORTANT: It is essential that you and any other operator of this product read and understand the contents of this manual before installing and using this product.

More information

Standard Grout Header. Protected Pressure Gauge. High Pressure Gauge. In-Line Grout Header. Inline Protected Pressure Gauge

Standard Grout Header. Protected Pressure Gauge. High Pressure Gauge. In-Line Grout Header. Inline Protected Pressure Gauge G A U G E S G R O U T H E A D E R S Protected Pressure Gauge In-line mounting accurately measures grout discharge pressure. Gauge is equipped with quick disconnect fittings that easily snaps into grout

More information

DIGITAL AUTOMATIC TYRE INFLATOR

DIGITAL AUTOMATIC TYRE INFLATOR DIGITAL AUTOMATIC TYRE INFLATOR Instruction Manual PSI Part No. 11.0556 Digital Automatic Tyre Inflator (Portable) Thank you for selecting our Digital Automatic Tyre Inflator (Portable), please read this

More information

200 PSI COMPRESSORS - MODEL NUMBERS

200 PSI COMPRESSORS - MODEL NUMBERS 200 PSI COMPRESSORS - MODEL NUMBERS 380C AIR COMPRESSOR KIT PART NO. 38033 480C AIR COMPRESSOR KIT PART NO. 48043 380C 480C IMPORTANT: It is essential that you and any other operator of this product read

More information

Model 130M Pneumatic Controller

Model 130M Pneumatic Controller Instruction MI 017-450 May 1978 Model 130M Pneumatic Controller Installation and Operation Manual Control Unit Controller Model 130M Controller is a pneumatic, shelf-mounted instrument with a separate

More information

MSC-P and MSC-N Manifolds for Steam Distribution and Condensate Collection

MSC-P and MSC-N Manifolds for Steam Distribution and Condensate Collection 1170850/1 IM-P117-36 ST Issue 1 MSC-P and MSC-N Manifolds for Steam Distribution and Condensate Collection Installation and Maintenance Instructions 1. Safety information 2. General product information

More information

Engineered Air Nozzles reduce noise levels and air costs.

Engineered Air Nozzles reduce noise levels and air costs. Air Nozzles Engineered Air Nozzles reduce noise levels and air costs. " Go Green" by upgrading your blowoff, cooling, and drying operation to the award winning Super Air Nozzles! What Are Air Nozzles?

More information

J138RSH and J150RSH 3/8" J138RSH 1/2" J150RSH. 3/8" Drive Sealed Head Ratchet 1/2" Drive Sealed Head Ratchet. Operation and Maintenance Manual WARNING

J138RSH and J150RSH 3/8 J138RSH 1/2 J150RSH. 3/8 Drive Sealed Head Ratchet 1/2 Drive Sealed Head Ratchet. Operation and Maintenance Manual WARNING J138RSH and J150RSH Operation and Maintenance Manual 3/8" J138RSH 1/2" J150RSH WARNING To reduce the risk of injury, read and understand these safety warnings and instructions before using the tool. Keep

More information

420C AIR COMPRESSOR KIT PART NO C AIR COMPRESSOR KIT PART NO

420C AIR COMPRESSOR KIT PART NO C AIR COMPRESSOR KIT PART NO 420C AIR COMPRESSOR KIT PART NO. 42042 460C AIR COMPRESSOR KIT PART NO. 46043 420C 460C IMPORTANT: It is essential that you and any other operator of this product read and understand the contents of this

More information

ATM PRODUCT LIST FEBRUARY 2018

ATM PRODUCT LIST FEBRUARY 2018 ATM PRODUCT LIST FEBRUARY 2018 011 024 6550 / atm@mweb.co.za / www.atmsa.info No 1 Picture Storage Information Price Tool wall units powder coated steel We sell at : Each unit comes with hanging hooks

More information

Operating Instructions Model and Hydrostatic Test Pump

Operating Instructions Model and Hydrostatic Test Pump Operating Instructions Model 39300 and 39301 Hydrostatic Test Pump Dimension Weight Pump Style Capacity Pressure Motor Lubrication Control Gauge Inlet Connection Outlet Connection Discharge Hose Hose Ends

More information

30T A/Manual Hydraulic Shop Press

30T A/Manual Hydraulic Shop Press 30T A/Manual Hydraulic Shop Press Operation Manual 1 1. Important Information 1.1 Safety Information 1.1.1 Hazard Symbols Used in the Manuals This manual includes the hazard symbols defined below when

More information

100C Air Compressor Kit

100C Air Compressor Kit 10010 100C Air Compressor (standard mounting bracket, CE Spec) 10014 100C Air Compressor (no leader hose or check valve, CE Spec) 10016 100C Air Compressor (with Omega Bracket, CE Spec) IMPORTANT: It is

More information

Industrial Products Catalog Tank Valves

Industrial Products Catalog Tank Valves Industrial Products Catalog Tank Valves Schrader International core competencies include high volume precision machining, assembly and testing of fluid control devices. Since developing the first pneumatic

More information

accidents which arise due to non-observance of these instructions and the safety information herein. SPECIFICATIONS

accidents which arise due to non-observance of these instructions and the safety information herein. SPECIFICATIONS 18 GAUGE 1-1/4 INCH BRAD NAILER Model: 7611 CALIFORNIA PROPOSITION 65 WARNING: You can create dust when you cut, sand, drill or grind materials such as wood, paint, metal, concrete, cement, or other masonry.

More information

REGULATORS FLOWMETERS HUMIDIFIERS. Professional GAUGES ASSESSORIES. Medical Apparatus. and Assessories ISO 13485/ISO 9001 CERTIFICATION

REGULATORS FLOWMETERS HUMIDIFIERS. Professional GAUGES ASSESSORIES. Medical Apparatus. and Assessories ISO 13485/ISO 9001 CERTIFICATION Medical Apparatus REGULATORS FLOWMETERS Professional Medical Apparatus and Assessories HUMIDIFIERS GAUGES ASSESSORIES ISO 13485/ISO 9001 CERTIFICATION Company Profile MORRIS ENGINEERING WORKS LTD. was

More information

Full Range Pressure Compensating Variable Flow Control

Full Range Pressure Compensating Variable Flow Control Engineering & Manufacturing Solutions Specifications: See flow chart for capacity. Rated for 3000 psi (207 bar). Weighs 7- ¾ lbs. (3.52 kg). 30-Micron Filtration Recommended. Torque to turn side lever

More information

Hydraulic comparison test pump Models CPP1000-X, CPP1600-X

Hydraulic comparison test pump Models CPP1000-X, CPP1600-X Calibration Hydraulic comparison test pump Models CPP1000-X, CPP1600-X WIKA data sheet CT 91.12 for further approvals see page 2 Applications Calibration service companies and service industry Maintenance

More information

REVERSIBLE AIR DRILL

REVERSIBLE AIR DRILL REVERSIBLE AIR DRILL MODEL NO: CAT87 PART NO: 3110835 OPERATING & MAINTENANCE INSTRUCTIONS GC0613 INTRODUCTION Thank you for purchasing this CLARKE Reversible Air Drill Before attempting to use this product,

More information

Pneumatic dead-weight tester Model CPB3500

Pneumatic dead-weight tester Model CPB3500 Calibration technology Pneumatic dead-weight tester Model CPB3500 WIKA data sheet CT 31.22 Applications Primary standard for calibrating the scale in a pneumatic range from -1... 120 bar / -14.5... 1,600

More information

O NEof Premium tools for professionals!

O NEof Premium tools for professionals! O NEof 6.000 Premium tools for professionals! 1 System Overview 190 Testing of Water Lines & Containers Testing Pumps 191-193 Testing of Gas- & Water Lines Analogue Testing Device 194-195 Testing of Waste

More information

PRESSURE REDUCTION FLOWMETERING, QUICK COUPLING PROBES AND ACCESSORIES

PRESSURE REDUCTION FLOWMETERING, QUICK COUPLING PROBES AND ACCESSORIES PRESSURE REDUCTION FLOWMETERING, QUICK COUPLING PROBES AND ACCESSORIES 1 3 1 - ALPINOX: oxygen Regulator - Medical oxygen regulator with flowmeter. - Medical oxygen regulator with flowmeter and Quick

More information

product manual H-1200 & H-1250 Universal and Portable Penetrometers

product manual H-1200 & H-1250 Universal and Portable Penetrometers 07.09 product manual H-1200 & H-1250 Universal and Portable Penetrometers Introduction Universal Penetrometer H-1200 Direct-reading instrument for precision penetration measurements of bituminous materials,

More information

Model Safety Program

Model Safety Program Model Safety Program DATE: SUBJECT: Safety Procedures for Servicing Single and Multi Piece Rim Wheels. REGULATORY STANDARD: OSHA 29 CFR 1910.177 RESPONSIBILITY: The company Safety Officer is. He/she is

More information

Operating Instructions Part No

Operating Instructions Part No DIGITAL AUTOMATIC TYRE INFLATOR Operating Instructions Part No. 11.0578 Thank you for selecting this Jamec Pem Automatic Tyre Inflator. Please read this manual before carrying out any installation or service

More information

Relief Valves. Relief Valves. International, Inc. Company ACIRCOR. RS Differential NB 9.5mm. RVA In-line Differential NB 6 to 19mm

Relief Valves. Relief Valves. International, Inc. Company ACIRCOR. RS Differential NB 9.5mm. RVA In-line Differential NB 6 to 19mm s s RS Differential NB 9.5mm RVA In-line Differential NB 6 to 19mm RV Direct Acting NB up to 9mm LPR Low Pressure Differential NB 8mm We design, machine, build and test all our products on one site in

More information

THE BP-301 SERIES. Operating and Service Manual. Series includes all variants of BP-301 (LF 0.1Cv / MF 0.5Cv)

THE BP-301 SERIES. Operating and Service Manual. Series includes all variants of BP-301 (LF 0.1Cv / MF 0.5Cv) THE BP-301 SERIES Operating and Service Manual Series includes all variants of BP-301 (LF 0.1Cv / MF 0.5Cv) Issue B October 2015 1 TABLE OF CONTENTS 1. Description... 3 2. Installation... 3 3. Operation...

More information

UNDERSEA LTD. SERVING THE DIVING INDUSTRY SINCE CATALOGUE 2007 Issue 1 EBBLAKE INDUSTRIAL ESTATE, VERWOOD, DORSET. U.K.

UNDERSEA LTD. SERVING THE DIVING INDUSTRY SINCE CATALOGUE 2007 Issue 1 EBBLAKE INDUSTRIAL ESTATE, VERWOOD, DORSET. U.K. UNDERSEA LTD. SERVING THE DIVING INDUSTRY SINCE 1970 CATALOGUE 2007 Issue 1 EBBLAKE INDUSTRIAL ESTATE, VERWOOD, DORSET. U.K. BH31 6BB TELEPHONE : 01202 82 20 25 TELEFAX : 01202 82 66 26 E-MAIL : info@undersea.uk.com

More information

PRESSURE REGULATORS AND FLOWMETERS, ALL MEDICAL GASES

PRESSURE REGULATORS AND FLOWMETERS, ALL MEDICAL GASES PRESSURE REGULATORS ALL MEDICAL GASES In this section we propose our pressure regulators (FM series, MU and MERCURY ) and our Rs flowmeters for applications other than oxygen therapy (presented in the

More information

Universal Valve Company Inc

Universal Valve Company Inc Universal Valve Company Inc 800-223-0741 www.universalvalve.com 1975-FA34 (Air Tower Troubleshooting Manual) Overview This manual has been arranged as a tool for diagnosing, and repairing Free Air Universal

More information

Pneumatic Blow Guns & Shop Accessories

Pneumatic Blow Guns & Shop Accessories OMPRESSED AIR SYSTEMS An efficient compressed air system is the product of good planning to ensure minimum pressure loss in the system, and the removal of most contaminants; water, compressor oil, particles,

More information

Pneumatic Hand Pumps with no Gauge Connection (scissor handle) AP0V (300 psi / 20 bar)

Pneumatic Hand Pumps with no Gauge Connection (scissor handle) AP0V (300 psi / 20 bar) Pneumatic Hand Pumps with no Gauge Connection (scissor handle) AP0V (300 psi / 20 bar) The quickest and most economical way to perform pneumatic field pressure calibrations on pressure transmitters, switches

More information

Vibration isolation system 1VIS10W. User manual

Vibration isolation system 1VIS10W. User manual Vibration isolation system 1VIS10W User manual Standa 2014 Table of contents 1. General information 3 1.1. Introduction 3 1.1.1. Safety 5 1.2. Location of the table 5 1.3. Air supply requirements 5 2.

More information

Universal Valve Company Inc

Universal Valve Company Inc 1975-FA34 (Air Tower Troubleshooting Manual) Overview This manual has been arranged as a tool for diagnosing, and repairing Universal Air Towers Please read closely to identify the components that are

More information

High-Pressure Heavy Lifting Air Bags & Accessories

High-Pressure Heavy Lifting Air Bags & Accessories High-Pressure Heavy Lifting Air Bags & Accessories High Pressure Heavy Lifting Bags for lifting the heaviest loads; up to 74 US tons. Use when maximum lifting force is needed in low clearance situations.

More information

Operating Instructions Models and Hydrostatic Test Pumps

Operating Instructions Models and Hydrostatic Test Pumps Operating Instructions Models 33100 and 33101 Hydrostatic Test Pumps 33100 DIMENSIONS: WEIGHT: PUMP: MOTOR: CONTROL: GAUGE: DISCHARGE HOSE: 16 (40cm) L x 22 (55cm) W x 18 (45cm) H 87 lbs., 39.5 kg Triplex

More information

Hydraulic Piston Accumulators

Hydraulic Piston Accumulators Hydraulic Installation All accumulators shipped from the factory will be pre-charged to a nominal pressure in order to seat the piston on the hydraulic cap. In this case the precharge will not be listed

More information

TONS! powerteam.com HEAVY LIFT CYLINDERS

TONS! powerteam.com HEAVY LIFT CYLINDERS NEW DESIGNS TONS! powerteam.com HEAVY LIFT CYLINDERS THE Precise MOST Positioning COMPREHENSIVE & ControlRANGE OF HIGH in a Responsive PRESSURE Package HEAVY LIFT CYLINDERS R_G SINGLE & DOUBLE ACTING,

More information

CUT OFF TOOL MODEL: CAT113

CUT OFF TOOL MODEL: CAT113 CUT OFF TOOL MODEL: CAT113 Part No: 3120135 ASSEMBLY & INSTRUCTION MANUAL LS0309 INTRODUCTION Thank you for purchasing this CLARKE product Before attempting to use the product, it is essential that you

More information

North America Product Catalog. Professional series line of pneumatic products & tire inflation equipment DRIVEN BY AIR.

North America Product Catalog. Professional series line of pneumatic products & tire inflation equipment DRIVEN BY AIR. DRIVEN BY AIR. North America Product Catalog 2017 Professional series line of pneumatic products & tire inflation equipment A HORNGROUP BRAND www.pcltireinflation.com DRIVEN BY AIR. WELCOME TO PCL Professional-grade

More information

Pressure calibration equipment

Pressure calibration equipment Pressure calibration equipment Contents Introduction 2 Oil operated deadweight testers DOS0015 (accuracy 0.015% of reading) 5 DOS0015 Dual Piston (accuracy 0.015% of reading) 6 DOS001 (accuracy 0.01% of

More information

PTC INSTRUMENTS 2301 Federal Ave Los Angeles CA Phone: Model 500 Automatic Operating Stand Type 3

PTC INSTRUMENTS 2301 Federal Ave Los Angeles CA Phone: Model 500 Automatic Operating Stand Type 3 The Model 500 automatic operating stand provides constant load, controlled rate-of-descent, and application velocity, through a geared electric motor and braking mechanism that alternately lowers the durometer

More information

4-in-1 Professional Inflator Kit

4-in-1 Professional Inflator Kit 4-in-1 Professional Inflator Kit Owner s Manual WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety

More information

THE MF-400 SERIES. Operating and Service Manual. Series includes all variants of MF-400/401

THE MF-400 SERIES. Operating and Service Manual. Series includes all variants of MF-400/401 THE MF-400 SERIES Operating and Service Manual Series includes all variants of MF-400/401 Issue A October 2013 1 TABLE OF CONTENTS 1. Description... 3 2. Installation... 3 3. Operation... 4 4. Special

More information

OPERATION & MAINTENANCE INSTRUCTIONS

OPERATION & MAINTENANCE INSTRUCTIONS 1 /2 REVERSIBLE AIR DRILL MODEL NO: CAT123 PART NO: 3110879 OPERATION & MAINTENANCE INSTRUCTIONS GC1110 INTRODUCTION Thank you for purchasing this CLARKE product. Before attempting to use this product,

More information

SELF-STORING AIR HOSES

SELF-STORING AIR HOSES 86 Series 11 14 17 19 WHY USE A SELF-STORING AIR HOSE? Self-storg hoses have many advantages: Space savgs Time savgs Ergonomics Light weight and flexibility Self-storg hoses save space; the hose simply

More information

Pneumatic Powered - Plunger Pumps

Pneumatic Powered - Plunger Pumps Models 42/62/82 D Series P.O. Box 80769 Lafayette, LA 70598-0769 (337) 235-9838 FAX (337) 235-9852 www.sidewinderpumps.com Pneumatic Powered - Plunger Pumps Suggested Installation & Operating Instructions

More information

TECHNICAL DATA MAINTENANCE AIR COMPRESSOR MODEL G-1

TECHNICAL DATA MAINTENANCE AIR COMPRESSOR MODEL G-1 Dry 131h 1. DESCRIPTION The Viking Model G-1 Maintenance Air Compressor is an electric motor-driven, aircooled, single-stage, oil-less compressor. The unit is equipped with a check valve and provides a

More information

Selecting the right pressure sensor for your application

Selecting the right pressure sensor for your application Selecting the right pressure sensor for your application This guide from Acal BFi details the key factors that you must consider when selecting a pressure sensor for your application. Selecting the best

More information

SIMPLAIR PIPING TOOL. JXT Company

SIMPLAIR PIPING TOOL. JXT Company SIMPLAIR PIPING INGERSOLL-RAND SIMPLAIR PIPING With push-in fittings and lightweight anodized aluminum pipe, a SimplAir system provides ideal connection throughout your entire air distribution system.

More information

Livewell/Baitwell Pumps. Livewell/Aerator

Livewell/Baitwell Pumps. Livewell/Aerator Livewell/Baitwell Pumps 03 Livewell/Baitwell Pumps Livewell/Aerator 049 050 03 Livewell / Baitwell Pumps selection GUIDE Livewell / Baitwell Pumps Tournament Series Bronze Base Fitting Discharge Outlet

More information