LF SpA Revision n.01 EN. Safety Data Sheet. 1. Identification of the substance or preparation and of the company / undertaking

Transcription

1 Page n. 1 / 7 1. Identification of the substance or preparation and of the company / undertaking 1.1. Product identifier Product name SHINE CLEAN 1.2. Relevant identified uses of the substance or preparation and uses advised against Use / description RINSE AID DETERGENT 1.3. Details of the supplier of the safety data sheet Company name L. F. SpA Address Via Voltri, 80 Town and country Cesena (FC) - Italy Tel Fax contact details info@lfspareparts.com Person responsible for the safety data sheet Dr. Raggi Leonardo 1.4. Emergency telephone number For urgent enquiries, contact Poison Control Centre: / Company headquarters: Tel Hazard identification 2.1. Classification of the substance or preparation In compliance with directives 67/548/EEC and 1999/45/EC and/or Regulation (EC) 1272/2008 (CLP) and subsequent amendments and adjustments, this product has not been classified as hazardous. However, since this product contains hazardous substances in such concentration to be mentioned in section 3, it requires a safety data sheet containing adequate information, in compliance with Regulation (EC) 1907/2006 and subsequent amendments Label elements This product does not require hazard labelling in compliance with directives 67/548/EEC and 1999/45/EC and subsequent amendments and adjustments. Hazard symbols: R Risk phrases: S Safety statements: Safety data sheet available on request for professional users Other hazards 3. Composition / information on ingredients 3.1. Substances Information not relevant.

2 Page n. 2 / Mixtures It contains: Identification. Conc. %. Classification 67/548/CEE. Classification 1272/2008 (CLP). FATTY ALCOHOL ALKOXYLATE, POLYMER CAS Xi R36/38 Eye Irrit. 2 H319, Skin Irrit. 2 H315 CE. - INDEX. - LONG CHAIN ALCOHOL ALKOXYKLATE CAS Xi R36/38 Eye Irrit. 2 H319, Skin Irrit. 2 H315 CE. - INDEX. - 2-PROPANOL CAS R67, F R11, Xi R36 Flam. Liq. 2 H225, Eye Irrit. 2 H319, STOT SE 3 H336 CE INDEX T+ = Highly Toxic (T+), T = Toxic (T), Xn = Harmful (Xn), C = Corrosive (C), Xi = Irritant (Xi), O = Oxidising (O), E = Explosive (E), F+ = Highly Inflammable (F+), F = Easily Inflammable (F), N = Hazardous for the Environment (N) See Section 16 of this information sheet for the full text of R phrases and H Hazard statements. 4. First air measures 4.1. Description of first aid measures EYES: rinse immediately with plenty of water for at least 15 minutes. Seek medical advice immediately. SKIN: wash immediately with plenty of water. Remove any contaminated clothing. If the irritation persists, seek medical help. Wash any contaminated clothing before using again. INHALATION: take the exposed person outside. If they have difficulty breathing, seek medical help immediately. INGESTION: seek medical help immediately. Induce vomiting only if directed to do so by the doctor. Never give anything by mouth to an unconscious person and unless authorized by a doctor Most important symptoms and effects, both acute and delayed For symptoms and effects caused by contained substances, see Section Indications on possible necessity for immediate medical attention and special treatment Follow doctor s instructions. 5. Fire-fighting measures 5.1. Extinguishing media APPROPRIATE EXTINGUISHING MEDIA Extinguishing media are carbon dioxide, foam, dry chemical powder. For product leaking and spillages that have not caught fire, use, nebulised water to disperse flammable vapours and protect people engaged in stopping the leakage. INAPPROPRIATE EXTINGUISHING MEDIA Do not use water jets. Water is not effective for the extinguishing of fires. Nevertheless, it can be used to cool closed containers that have been exposed to the flame, preventing blasts and explosions Special hazards caused by the substance or by the preparation HAZARDS CAUSED BY THE EXPLOSION IN CASE OF FIRE Excess pressure can occur in containers exposed to fire creating an explosion hazard. Do not breathe products of combustion (carbon oxides, toxic pyrolysis products, etc.).

3 Page n. 3 / Advice for firefighters GENERAL INFORMATION Use jets of water to cool the containers and prevent product decomposition as well as the development of substances that are potentially hazardous for health. Always wear full fire protection equipment. Collect all water used to extinguish the fire; this must not drain into the main sewer. Dispose of contaminated water used to extinguish the fire and other fire residues in compliance with the laws in force. EQUIPMENT Protective helmet with visor, fireproof clothing (fireproof jacket and trousers with straps around the arms, legs and waist), protective gloves (fireproof, slash-proof and dielectric), self-contained breathing apparatus (self-protector). 6. Accidental release measures 6.1. Personal precautions, protective equipment and emergency procedures Eliminate all sources of ignition (cigarettes, flames, sparks, etc.) from the leakage site. In the case of solids, avoid the formation of dust by spraying the product with water, if there are no contraindications. Use breathing equipment if powders or vapours are released into the air. Block the leakage if there is no hazard. Do not handle damaged containers or leaked product without the use of all appropriate protective equipment. Have unequipped persons removed from the area. For information on risks for the environment and health, respiratory protection, ventilation and personal protective equipment, see the other sections in this information sheet Environmental precautions Do not allow the product to enter sewers, surface and ground waters and confined areas Methods and material for containment and cleaning up Extract liquid products into appropriate containers (in a material that is compatible with the product) and use inert absorbent material (sand, vermiculite, diatomaceous soil, Kieselguhr, etc.) to suck up the spillage. Collect as much material as possible using non-sparking equipment and store into disposal containers. If the product is in solid form, collect the spilt product into plastic containers using non-sparking mechanical equipment. Eliminate residues with water jets if there are no contraindications to this measure. Thoroughly air the area affected by the spillage. The disposal of contaminated materials must be compliant with the instructions at point Reference to other sections See sections 8 and 13 for information concerning personal protection and disposal 7. Handling and storage WARNING: do not transfer into containers other than original ones, risk of fatal mistakes of exchange with beverages Precautions for safe handling Prevent accumulation of electrostatic charges. Vapours can catch fire exploding, therefore prevent accumulation by keeping windows and doors open and ensuring cross ventilation. Without adequate ventilation, vapours may collect in low areas and ignite, even at a distance, if triggered, with the danger of a return flame. Keep away from heat, sparks and open flames. Do not smoke or use matches or lighters. Ground containers during decanting and wear antistatic shoes. Strong shaking and vigorous flowing of the liquid in pipes and equipment may cause the creation and collection of electrostatic charges, for the low conductivity of the product. In order to prevent the risk of fire and explosion, never use compressed air during handling. Open the containers with caution as they might be pressurized. WARNING: do not transfer into containers other than original ones, risk of fatal mistakes of exchange with beverages Conditions for safe storage, including any incompatibilities Store in sealed containers and in a well-ventilated area Specific end uses

4 Page n. 4 / 7 8. Exposure controls /personal protection 8.1. Control parameters Description Type State TWA/8h STEL/15min mg/m3 ppm mg/m3 ppm 2-PROPANOL TLV-ACGIH Skin 8.2. Controlling exposure On the basis that the implementation of adequate technical measures should always be given priority over personal protection equipment, ensure good ventilation of the workplace with an effective local extraction system or with the outlet of polluted air. PROTECTING HANDS Protect hands with category I work gloves (ref. Directive 89/686/EEC and standard EN 374) in latex, PVC or equivalent. When choosing appropriate work glove material, take into account: degradation, time to breakage and permeation. Before use, always check work gloves resistance to preparations, as it is not predictable. Gloves have a wear-out time that depends on the duration of exposure. PROTECTING SKIN Wear category I professional work clothes with long sleeves and safety footwear (ref. Directive 89/686/EEC and standard EN 344). Wash with soap and water after removing protective clothing. PROTECTING RESPIRATION If the threshold value for one or more of the substances present in the preparation is exceeded, with reference to daily exposure in the work environment or a fraction thereof as defined by the company`s prevention and protection service, wear a filter mask type A or universal type, whose class (1, 2 or 3) will have to be chosen according to the limit concentration of use (ref. standard EN 141). The use of protecting devices for the respiratory tract, such as masks with organic vapour and dust/mist cartridges, is necessary in the absence of technical measures limiting personnel exposure. The protection provided by masks is in any case limited. If the substance in question is odourless or its olfactory threshold is higher than the relative exposure limit and in the event of an emergency, or when exposure levels are unknown or the concentration of oxygen in the workplace is less than 17% volume, wear self-contained, open-circuit compressed air breathing apparatus (ref. standard EN 137) or fresh air hose breathing apparatus for use with full face mask, half mask or mouthpiece (ref. standard EN 138). PROTECTING EYES Wear airtight protective goggles (ref. standard EN 166). 9. Physical and chemical properties 9.1. Information on basic physical and chemical properties Physical state... Liquid Colour... Light blue Odour... Characteristic Odour threshold... NA (not available). ph... 5 Melting or freezing point... NA (not available). Boiling point... NA (not available). Distillation range... NA (not available). Flash point... NA (not available). Evaporation rate... NA (not available). Flammability of solids and gases... NA (not available). Lower flammability limit... NA (not available). Upper flammability limit... NA (not available). Lower explosive limit... NA (not available). Upper explosive limit... NA (not available). Vapour pressure... NA (not available). Vapour density... NA (not available). Specific gravity... 0,992 Kg/l Solubility... Soluble Partition coefficient: n-ottanol/ water:... NA (not available). Ignition temperature... NA (not available). Decomposition temperature... NA (not available). Viscosity... NA (not available). Oxidizing properties... NA (not available).

5 Page n. 5 / Altre informazioni VOC (Directive 1999/13/CE):... 5,00 % - 49,59 VOC (Directive volatile):... 2,94 % - 29,16 g/lit. g/lit. 10. Stability and Reactivity Reactivity No specific hazardous reaction with other substances under normal conditions of use Chemical stability This product is stable under normal conditions of use and storage Possible hazardous reactions Vapours may form explosive mixtures with air Conditions to avoid Avoid overheating, electrostatic discharges, as well as any source of ignition Incompatible materials Hazardous decomposition products In the event of thermal decomposition or fire, the preparation may release gases and vapours that are potentially dangerous to health. 11. Toxicological information No reported information on damage to health, due to exposure to the product. In any case, it is recommended to operate within the rules of good industrial hygiene practices. In particularly sensitive individuals, this preparation may cause mild effects on health through inhalation exposure and/or skin absorption and/or eye contact and/or swallowing Information on toxicological effects LONG CHAIN ALCOHOL ALKOXYLATE LD50 (Oral): > 2000 mg/kg Rat FATTY ALCOHOL ALKOXYLATE, POLYMER LD50 (Oral): > 2000 mg/kg Rat 2-PROPANOL LD50 (Oral): 4710 mg/kg Rat LC50 (Inhalation): 72,6 mg/l/4h Rat LD50 (Dermal): mg/kg Rat

6 Page n. 6 / Ecological information Use this product according to good work practice; avoiding dispersal of the product in the environment. Inform the competent authorities if the product enters waterways or drains or has contaminated the ground or vegetation Toxicity LONG CHAIN ALCOHOL ALKOXYLATE LC50 (96h): > 10 mg/l fish FATTY ALCOHOL ALKOXYLATE, POLYMER LC50 (96h): > 10 mg/l fish Persistence and degradability Bioaccumulative potential Mobility in soil Results of PBT and vpvb assessment Other adverse effects 13. Disposal considerations Waste treatment methods Reuse, if possible. Product residues must be classed as special non-harmful waste. Disposal must be entrusted to a company authorized for the disposal of waste, in compliance with the national legislation and any local regulations. Transport of waste may be subject to A.D.R. CONTAMINATED PACKAGING Contaminated containers must be consigned for recycling or disposal in compliance with national regulations for the disposal of waste material. 14. Transport information This product is not classified as dangerous as in compliance with provisions in force regarding the Carriage of Dangerous Goods by Road (ADR) Rail (RID), by sea (IMDG Code) and by air (IATA).

7 Page n. 7 / Regulatory information Composition (648/04/EC): inf. 5%: anionic surfactant; 15-30% nonionic Safety, health and environmental regulations/legislation specific for the substance or preparation Seveso category. Restriction regarding product or substances contained according to Annex XVII Regulation (EC) 1907/2006. Candidate List (Art. 59 REACH) substances. Substances subject to authorization (Annex XIV REACH). Health controls Chemical safety assessment No chemical safety assessment has been compiled for the preparation or the substances it contains. 16. Other information Indications of hazards (H) referred to in sections 2-3 of this information sheet: Eye Irrit. 2 Eye irritation, category 2 Skin Irrit. 2 Skin irritation, category 2 Flam. Liq. 2 Flammable liquid, category 2 STOT SE 3 Specific target organs toxicity - single exposure, category 3 H225 Highly flammable liquid and vapour. H319 Causes serious eye irritation. H315 Causes skin irritation. H336 May cause drowsiness or dizziness. R - Risk phrases mentioned in sections 2-3 of this information sheet: R11 Highly flammable. R36 Irritating to eyes. R36/38 Irritating to eyes and skin. R67 Vapours may cause drowsiness and dizziness. GENERAL REFERENCES: /45/EC Directive and subsequent amendments 2. 67/548/EEC Directive and subsequent amendments and adjustments 3. (CE) 1907/2006 Regulation of the European Parliament (REACH) 4. (CE) 1272/2008 Regulation of the European Parliament (CLP) 5. (CE) 790/2009 Regulation of the European Parliament (I Atp. CLP) 6. (CE) 453/2010 Regulation of the European Parliament 7. The Merck Index. Ed Handling Chemical Safety 9. Niosh - Registry of Toxic Effects of Chemical Substances 10. INRS - Fiche Toxicologique 11. Patty - Industrial Hygiene and Toxicology 12. N.I. Sax - Dangerous properties of Industrial Materials-7 Ed., 1989 Note for users: The information contained in this data sheet is based on the knowledge available to the producer at the date of the most recent version. Users must ensure the suitability and completeness of the information in relation to the specific intended use of the product. This document must not be interpreted as a guarantee of any specific properties of the product. Since the use of this product is not under the direct control of the manufacturer, it is the obligation of users to observe, under their own responsibility, the laws and regulations in force in relation to health and safety. The manufacturer assumes no responsibility for improper uses of this product. -Amendments to previous version. Modifications to the following sections: 07 / 13