MATERIAL SAFETY DATA SHEET Validation Beads for ique Screener PLUS

Transcription

1 IntelliCyt Corporation Printed: 12/16/ San Mateo Blvd NE Revision: 12/16/15 Albuquerque, NM Created: 12/16/15 1. Product and Company Information Product Code: Product Name: Validation Beads for ique Screener PLUS Manufacturer Information Company Name: Phone Number: Fax Number: Information: IntelliCyt Corporation Voice Fax Not classified as hazardous according to Regulation (EC) 1272/2008 (CLP/GHS) or Directive 67/548/EEC as amended. Caution: This substance has not been fully tested (EC). No labels required according to regulation (EC) 1272/2008 (CLP/GHS) or Directive 1999/45/EC. NFPA Ratings Health = 0 Flammability = 0 Reactivity = 0 Name CAS Number EC Number Polystyrene beads organic dye stained OR Polystyrene divinylbenzene 2. Composition/Information on Ingredients 3. Hazards Identification Regulation (EC) 1272/2008 Hazard class, categ. Code, & hazard statements Percent (w/w) approx Not hazardous % Not hazardous %

2 Hazard Description: This product contains no hazardous constituents, or the concentration of all chemical constituents are below the regulatory threshold limits described by Occupational Safety Health Administration Hazard Communication Standard 29 CFR and the European Directive 91/155/EEC, and 93/112/EC. Classification system The classification was made according to the latest editions of international substances lists, and expanded upon from company and literature data. Signs and Symptoms of Exposure: May cause headache, dizziness, nausea, and vomiting. Vomiting may occur spontaneously. Symptoms of ingestion include vomiting, circulatory collapse, confusion, coma, and, in severe exposure, death.

3 MATERIAL SAFETY DATA SHEET

4 4. First Aid Measures Emergency and First Aid Procedures: General information No special measures required. After inhalation Seek medical treatment in case of complaints. After skin contact Immediately wash with water and soap and rinse thoroughly. After eye contact: Rinse opened eye for several minutes under running water. If symptoms persist, consult a doctor. Ingestion: Call a physician immediately. Do not induce vomiting unless directed by medical personnel. Information for doctor Show the product label or this MSDS. 5. Fire Fighting Measures Suitable extinguishing agents: CO2, extinguishing powder or water spray. Unsuitable extinguishing agents: No data available. Flammable Properties and Hazards: No data available. Special hazards caused by the material, its products of combustion, or resulting gases: No data available. Protective equipment: As in any fire, wear self-contained breathing apparatus pressure-demand (MSHA/NIOSH-approved or equivalent) and full protective gear to prevent contact with skin and eyes. 6. Accidental Release Measures Person-related safety precautions: Wear protective clothing. No special precautions required. Measures for cleaning/collecting: Dilute with water. Absorb spill with inert material; i.e., dry sand or earth, and then place in chemical waste container. Additional information: After removal, ventilate contaminated area and flush thoroughly with water.

5 7. Handling and Storage HANDLING Information for safe handling: Avoid contact with skin, eyes, and clothing. Avoid prolonged or repeated exposure. Wash thoroughly after handling. Avoid breathing dust, vapor, mist, gas. Information about protection against explosion and fires: No special measures required. STORAGE Requirements to be met by storeroom and receptacles: Store at correct temperatures. Information about storage in one common storage facility: Do not reuse the container. Further information about storage conditions: Store at correct temperatures. Do not reuse the container. 8. Exposure Controls/Personal Protection Additional information about design of technical systems: Facilities storing or utilizing this material should be equipped with an eyewash facility and a safety shower. Use process enclosures, local exhaust ventilation, or other engineering controls to control airborne levels below recommended exposure limits. PERSONAL PROTECTIVE EQUIPMENT Protective equipment Wear standard laboratory protective clothing. Breathing equipment: No data available. Protection of hands: Latex disposable gloves. Wash thoroughly after handling. Eye protection: Safety glasses. Body protection: Protective work clothing (lab coat). Do not take internally. General Information 9. Physical and Chemical Properties Form: Liquid; dilute suspension of polystyrene beads in aqueous media. Color: A colorless or white solution. Melting point/melting range: No data. Boiling point/boiling range: No data. Flash Point: No data. Auto igniting: No data. Danger of explosion: LEL - no data. UEL - No data. Vapor pressure: No data. Density: No data. ph value: 5-8.

6 Stability: Stable. 10. Stability and Reactivity Thermal decomposition/conditions to be avoided: No data available. Materials to be avoided/incompatible material: strong oxidizing agents, bases. Conditions to avoid - hazardous: No data available. Hazardous Polymerization: Will not occur. Dangerous products of decomposition: None known. 11. Toxicological Information ACUTE TOXICITY Area of Primary Irritant Effect: Skin May cause skin irritation. Eyes - Eye irritant. Respiratory System - May be irritating to the respiratory system. Sensitization: Excessive inhalation may cause bronchial irritation, coughing, and nausea. Signs and Symptoms of Exposure: None known. Additional toxicological information: The toxicological effects of this material have not been thoroughly studied. Carcinogenicity/Other Information: NTP - No, IARC Monographs - No, OSHA Regulated - No 12. Ecological Information General Notes: The runoff from fire control or dilution water may cause pollution. Product: Beads in solution. 13. Disposal Considerations Recommendations Dispose of material in accordance with federal (40 CFR 261), state, and local requirements. Un-cleaned packaging recommendation: Disposal must be made according to state and federal regulations.

7 14. Transport Information LAND TRANSPORT (US DOT) DOT Proper Shipping Name: N o n e a s s i g n e d DOT Hazard Class: 8 DOT Hazard Label: UNNA Number: UN1791 Packing Group: III Additional Transport Information: Transport in accordance with local, state, and federal regulations. 15. Regulations US EPA SARA Section 355: None of the ingredients is listed. US EPA SARA Section 313 (specific toxic chemical listings): None of the ingredients is listed. TSCA (Toxic Substances Control Act) none California Proposition 65 Chemicals known to cause cancer: None of the ingredients is listed Chemicals known to cause reproductive toxicity for females: None of the ingredients is listed Chemicals known to cause reproductive toxicity for males: None of the ingredients is listed Chemicals known to cause developmental toxicity: None of the ingredients is listed IARC (International Agency for Research on cancer: None of the ingredients is listed NTP (National Toxicology Program): None of the ingredients is listed TLV (Threshold Limit Value established by ACGIH): none 16. Other Information Company Policy/Disclaimer: For research use only, not for human or veterinary clinical use. This information is believed to be accurate and represents the best information currently available to us. However, we make no warranty of merchantability or any other warranty, express or implied, with respect to such information, and we assume no liability resulting from its use. Users should make their own investigations to determine the solubility of the information for their particular purpose.