Supplier: 3. COMPOSITION / INFORMATION ON INGREDIENTS Hazardous Ingredients¹ % Wt. CAS No. EC No. Symbol R-phrases 3-Aminomethyl-3,5,5-

Transcription

1 MATERIAL SAFETY DATA SHEET in accordance with 1907/2006/EC - REACH (453/2010/EC) 1. IDENTIFICATION OF THE SUBSTANCE / MIXTURE AND OF THE COMPANY / UNDERTAKING Product Name: ARC SD4i (Part B) (BLU, GY) Revision: 30 December 2010 Date of issue: 30 December 2010 MSDS No. 392B-4 Hazardous according to criteria of Safe Work Australia. Company: A.W. CHESTERTON COMPANY 860 Salem Street Groveland, MA , USA Tel.: Fax: (Mon. - Fri. 8:30-5:00 PM EST) (MSDS questions): ProductMSDSs@chesterton.com customer.service@chesterton.com MSDS requests: For Chemical Emergency: 24 hours per day, 7 days per week Call Infotrac: Outside N. America: (collect) Use: Supplier: ARC Polymer Composite. This is the curative component of a two part system using ARC SD4i (Part A) and mixed to provide chemical protection for storage tanks. 2. HAZARDS IDENTIFICATION Causes burns. May cause sensitisation by skin contact. The safety and health hazards are detailed separately for Part A and Part B. Upon machining, refer to the precautions in the safety data sheets for Part A and Part B. 3. COMPOSITION / INFORMATION ON INGREDIENTS Hazardous Ingredients¹ % Wt. CAS No. EC No. Symbol R-phrases C 21/ /53 Silica (Quartz) Silicon Carbide Modified cycloaliphatic amine C Benzyl Alcohol Xn 20/22 See section 15 for text of risk phrases on the label and section 16 for others. A.W. Chesterton Company, 2010 All Rights Reserved. ¹Classified according to: * 29 CFR , 1915, 1916, 1917 Reg. US Patent and TM Office * Mass. Right-to-Know Law (ch. 40, M.G.L..O. 111F) * California Proposition 65 * Controlled Products Regulations * 67/548/EEC, 1272/2008/EC (ATP01) 99/45/EC and 75/324/EEC * Worksafe Australia [NOHSC: 1008 (2004)] Page 1 of 5

2 4. FIRST AID MEASURES Inhalation: Remove to fresh air. If not breathing, administer artificial respiration. Contact physician. Skin Contact: Eye Contact: Ingestion: Advice to Physician: Flood area with water while removing contaminated clothing. Wash clothing before reuse. Consult physician. Flush eyes for at least 30 minutes with large amounts of water. Consult physician. If conscious, do not induce vomiting; drink milk, water or vinegar. Contact physician immediately. Treat symptoms. 5. FIRE-FIGHTING MEASURES Extinguishing Methods: Unusual Fire and Explosion Hazards: Special Fire Fighting Measures: Flammability Classification: Carbon Dioxide, dry chemical, foam or water spray Cool exposed containers with water. Recommend Firefighters wear self-contained breathing apparatus. HAZCHEM Emergency Action Code: 2 Z 6. ACCIDENTAL RELEASE MEASURES Personal Precautions: Avoid skin contact. Utilize exposure controls and personal protection as specified in Section 8. Environmental Precautions: Methods of Clean Up: Keep out of sewers, streams and waterways. Contain spill to a small area. Pick up with absorbent material (sand, sawdust, clay, etc.) and place in a suitable container for disposal. Flush floor with dilute (5%) Acetic Acid. Collect rinsate for proper disposal. Refer to section 13 for disposal advice. 7. HANDLING AND STORAGE Handling: Avoid all direct contact. Avoid breathing mist or vapor. Utilize exposure controls and personal protection as specified in Section 8. Remove contaminated clothing immediately. Wash clothing before reuse. Contaminated leather including shoes cannot be decontaminated and should be discarded. Keep container closed when not in use. Avoid creating and breathing dust during removal, drilling, grinding, sawing or sanding. Storage: Store in a cool, dry area. 8. EXPOSURE CONTROLS / PERSONAL PROTECTION Hazardous Ingredients OSHA ACGIH TLV AUSTRALIA ppm mg/m 3 ppm mg/m 3 ppm mg/m 3 Silica (Quartz) (resp) 0.1 (resp) (total) 0.3 Silicon Carbide 15 (inhal) 10 (resp) 10 (resp) 3 Modified cycloaliphatic amine Benzyl Alcohol A.W. Chesterton Company, 2010 All Rights Reserved. Reg. US Patent and TM Office Page 2 of 5

3 Respiratory Protection: Ventilation: Protective Gloves: Eye Protection: Other: Not normally needed. If exposure limits are exceeded or product is sprayed, utilize an approved airsupplied respirator. Good general mechanical ventilation. If it is necessary to alter the final cured product such that dust may be generated, use adequate dust extraction or damp down. Chemical resistant gloves (e.g., butyl rubber, nitrile) Safety goggles. Impervious clothing as necessary to prevent skin contact. 9. PHYSICAL AND CHEMICAL PROPERTIES Physical state viscous liquid Odour Amine Colour red or blue Vapour 20 C not determined Initial boiling point not applicable % Aromatics by weight Melting point not determined ph not applicable % Volatile (by volume) Density 1,52 1,54 kg/l Flash point 109 C (228 F) Weight per volume lbs/gal. Method PM Closed Cup Coefficient (water/oil) < 1 Viscosity C Vapour density (air=1) > 1 Autoignition temp. not determined Rate of evaporation (ether=1) < 1 Explosion limits not determined Solubility in water insoluble Other EPA 24: lbs/gal. 10. STABILITY AND REACTIVITY Stability: Hazardous Polymerization: Hazardous Decomposition Products: Conditions to Avoid: Materials to Avoid: Stable Will not occur. Carbon Monoxide, Carbon Dioxide, NOx, aldehydes and other toxic fumes. Open flames and high temperatures. Strong acids and strong oxidizers like liquid Chlorine and concentrated Oxygen. 11. TOXICOLOGICAL INFORMATION Primary Route of Exposure Under Inhalation, skin and eye contact. Personnel with pre-existing allergies, eczema or skin Normal Use: conditions may be aggravated by exposure. Acute Effects: Direct contact will cause burns to skin, eyes and mucous membranes. High vapor concentrations may cause respiratory tract irritation. Chronic Effects: Other Information: Substance Test Result Product LD50 dermal, rabbit > 2000 mg/kg LD50 oral, rat 1030 mg/kg Benzyl Alcohol LC50 inhalation, rat 8,8 mg/l/4 h Benzyl Alcohol LD50 oral, rat 1230 mg/kg May cause allergic skin sensitization. Repeated inhalation of respirable free silica may cause scarring of the lungs with cough and shortness of breath. Silicosis, a delayed lung injury that is a disabling, progressive and sometimes fatal pulmonary fibrosis, may result. The International Agency for Research on Cancer (IARC) and the National Toxicology Program (NTP) have classified inhaled silica as a human carcinogen. The silica in this product does not separate from the mixture or in of itself become air-borne, therefore it does not present a hazard in normal use. A.W. Chesterton Company, 2010 All Rights Reserved. Reg. US Patent and TM Office Page 3 of 5

4 12. ECOLOGICAL INFORMATION Ecotoxicological data have not been determined specifically for this product. The information given below is based on a knowledge of the components and the ecotoxicology of similar substances. Mobility: Degradability: Accumulation: Ecotoxicity: Liquid. Insoluble in water. In determining environmental mobility, consider the product's physical and chemical properties (see Section 9). : biodegradable. Benzyl Alcohol: expected to biodegrade relatively quickly. not determined is harmful to aquatic organisms. 13. DISPOSAL CONSIDERATIONS Unreacted components are a special waste (classified as hazardous according to 91/689/EEC). Combine resin and curative. The final cured material is considered nonhazardous. Landfill sealed containers with a properly licensed facility. May be incinerated at an appropriate facility. Check local, state and national/federal regulations and comply with the most stringent requirement. EWC-code: TRANSPORT INFORMATION TDG: UN2289, ISOPHORONEDIAMINE SOLUTION, 8, IMDG: UN2289, ISOPHORONEDIAMINE SOLUTION, 8,, EmS No. F-A, S-B, ERG NO. 153 IATA/ICAO: UN2289, ISOPHORONEDIAMINE SOLUTION, 8, ADR/RID: UN2289, ISOPHORONEDIAMINE SOLUTION, 8, U.S. DOT : Shipping Name: 1 ISOPHORONEDIAMINE SOLUTION Hazard Class: 8 UN/NA #: UN2289 Packaging Group #: Emergency Response Guide Book No NOTE: Shipped as Consumer Commodity ORM-D in packaging having a rated capacity gross weight of 66 lb. or less (49 CFR (c)). 15. REGULATORY INFORMATION European Classification¹: C - Corrosive R-Phrase(s): R34 Causes burns. R43 May cause sensitisation by skin contact. S-Phrase(s): S23C Do not breathe vapour/spray. S51 Use only in well-ventilated areas. S36/37/39 Wear suitable protective clothing, gloves and eye/face protection. S26 In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. S28B After contact with skin, wash immediately with plenty of water. S45 In case of accident or if you feel unwell, seek medical advice immediately (show the label where possible). Name of the substances on the label: Other information:, Modified cycloaliphatic amine A.W. Chesterton Company, 2010 All Rights Reserved. Reg. US Patent and TM Office Page 4 of 5

5 Canadian Classification¹: Risk Phrase(s): Precautionary and First Aid Measure(s): Other Information: E: Corrosive materials; D2A: Very toxic materials causing other effects; D2B: Toxic materials causing other effects Causes burns. May cause sensitisation by skin contact. IARC has classified inhaled silica as a human carcinogen. Do not breathe vapour/spray. Use only in well-ventilated areas. Wear suitable protective clothing, gloves and eye/face protection. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. After contact with skin, wash immediately with plenty of water. In case of accident or if you feel unwell, seek medical advice immediately (show the label where possible). 16. OTHER INFORMATION US EPA SARA TITLE Hazardous Materials Identification System (HMIS) 312 Hazards : 313 Chemicals : 4 = Severe Hazard HEALTH 3 3 = Serious Hazard Immediate 2 = Moderate Hazard FLAMMABILITY 1 1 = Slight Hazard Delayed 0 = Minimal Hazard REACTIVITY 1 * = See Section 8 Personal Protection * JAPAN PRTR Class I Chemicals : Class II Chemicals : Risk phrases in section 3: R20: Harmful by inhalation. R21/22: Harmful in contact with skin and if swallowed. R34: Causes burns. R43: May cause sensitisation by skin contact. R52/53: Harmful to aquatic organisms, may cause long-term adverse effects in the aquatic environment. Changes to the MSDS in this revision: Sections 1, 2, 6, 7, 8, 11, 13. This information is based solely on data provided by suppliers of the materials used, not on the mixture itself. No warranty is expressed or implied regarding the suitability of the product for the user s particular purpose. The user must make their own determination as to suitability. A.W. Chesterton Company, 2010 All Rights Reserved. Reg. US Patent and TM Office Page 5 of 5