Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK

Transcription

1 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK ISO/IEC17065:2012 to provide product conformity certification 56 Leslie Hough Way Salford Greater Manchester M6 6AJ Contact: Helen Taft Tel: +44 (0) Fax: +44 (0) Website: Locations where certification activities covered by the above Accreditation are undertaken INSPEC International Limited 56 Leslie Hough Way Salford Greater Manchester M6 6AJ United Kingdom Assessment Manager: RC3 Page 1 of 17

2 DETAIL OF ACCREDITATION PERSONAL PROTECTIVE EQUIPMENT Eye Protection Ophthalmics - Non-prescription Sunglasses and Fashion Eyewear - Requirements ANSI Z80-3:1996 Occupational and educational personal eye and face protection devices ANSI Z87.1:2010 Eye protectors for industrial applications AS/NZ 1337:2010 Filters for protection against radiation generated in welding and allied operations AS/NZ :1992 Filters for protection against ultraviolet radiation AS/NZ :1992 Filters for protection against infra-red radiation AS/NZ :1992 Snorkels and face masks BS 4532:1969 Specification for Surface swimming goggles. BS 5883:1996 Eye-protectors for racket sports Part 1 : Squash BS :1998 Eye and face protectors including update CSA Z94.3:2007 Personal eye-protection - Specifications EN 166:2001 Personal eye-protection - Filters for welding and related techniques - Transmittance requirements and recommended use EN 169:2002 Assessment Manager: RC3 Page 2 of 17

3 Eye Protection (cont d) Personal eye-protection - Ultraviolet filters - Transmittance requirements and recommended use EN 170:2002 Personal eye-protection - Infrared filters - Transmittance requirements and recommended use EN 171:2002 Sunglare filters used in personal eye-protectors for industrial use + A2:2001 EN 172:1994 Personal eye-protection - Ski goggles for downhill skiing EN 174:2001 Personal eye-protection - Equipment for eye and face Protection during welding and allied processes EN 175:1997 Personal eye-protection - Eye-protectors for adjustment work on lasers and laser systems (laser adjustment eye-protectors) EN 208:2009 Personal eye-protection - Automatic welding filters + A1:2009 EN 379:2003 +A1:2009 Personal eye protection - Mesh eye and face protectors EN 1731:2006 Personal eye equipment - Sunglasses and Sunglare filters for general use and filters for direct observation of the sun EN 1836:2005 Personal eye protection - Goggles for motorcycles and moped users EN 1938:2010 Personal eye protection - Eye protectors for snowmobile users EN 13178:2000 Assessment Manager: RC3 Page 3 of 17

4 Eye Protection (cont d) Face shields and visors for use with fire-fighters' and high performance industrial safety helmets used by fire-fighters, ambulance and emergency services EN 14458:2004 Spectacle lenses - Fundamental requirements for uncut finished lenses ISO 14889:2009 Ophthalmic optics and instruments - Optical devices for low-vision aids ISO 15253:2000 Ophthalmic optics - Uncut finished lenses - Part 1: Specifications for single-vision and multifocal lenses ISO :2004 Ophthalmic optics - Uncut finished spectacle lenses - Part 2: Specifications for progressive power lenses ISO :2004 Ophthalmic optics - Uncut finished spectacle lenses - Part 3: Transmittance specifications and test methods ISO :2003 Ophthalmic optics - Uncut finished spectacle lenses - Part 4: Specifications and test methods for anti-reflective coatings SO :2006 Fall Protection Safety Requirements for Personal Fall Arrest Systems, Subsystems, and Components ANSI Z359.1:2007 Connecting components for personal fall arrest systems ANSI Z359.12:2009 Personal energy absorbers and energy absorbing lanyards ANSI Z359.13:2009 Assessment Manager: RC3 Page 4 of 17

5 Fall Protection (cont d) Industrial fall-arrest systems and devices Part 1: Harnesses and ancillary equipment AS/NZS :2007 Industrial fall-arrest systems and devices Part 2: Horizontal lifeline and rail systems AS/NZS :2001 Industrial fall-arrest systems and devices Part 3: Fall-arrest devices AS/NZS :1997 Industrial fall-arrest systems and devices Part 2: Horizontal lifeline and rail systems Supplement 1: Prescribed configurations for horizontal lifelines AS/NZS Supp1:2001 specifications for personal climbing equipment ASTM F887:2005 Personal protective equipment against falls from a height - Descender devices - Single-hand operated descender devices for self or assisted rescue + AMD 1 BS 8405:2003 Personal fall protection equipment - Twin-legged energy-absorbing lanyards - Specification BS 8513:2009 Connecting components for personal fall arrest systems (PFAS) CSA Z :2003 Safety belts and lanyards SA Z259.1:1995 Full body harness CSA Z259.10:2006 Energy absorbers and lanyards CSA Z259.11:2005 Assessment Manager: RC3 Page 5 of 17

6 Fall Protection (cont d) Fall Arresters, Vertical Lifelines and Rails CSA Z :2004 Self-retracting devices for Personal Fall-Arrest Systems CSA Z :2004 height - Descender devices (incorporating Amendment 1) EN 341:1992 height - Lanyards EN 354:2010 height - Energy Absorbers EN 355:2002 Personal Protective equipment for work positioning and prevention of falls from a height - Belts for work positioning and restraint and work positioning lanyards EN 358:1999 height - Retractable type fall arresters EN 360:2002 height - Full body harness EN 361:2002 height - Connectors EN 362:2004 Personal fall protection equipment - Personal fall protection systems EN 363:2008 Protective equipment against falls from a height - Anchor devices - Requirements and Testing (incorporating amendment 1) EN 795:1996 Assessment Manager: RC3 Page 6 of 17

7 Fall Protection (cont d) height - Sit Harnesses EN 813:2008 Mountaineering equipment - Dynamic mountaineering ropes - Safety requirements and test methods EN 892:2004 Deck Safety Harness and safety line for recreational craft - safety requirements and test methods EN 1095:1998 Rescue equipment - Rescue lifting devices EN1495:1996 Personal fall protection equipment - Rescue lifting devices EN 1496:2006 Rescue equipment - Rescue harness EN 1497:2007 Rescue equipment - Rescue loops EN 1498:1996 height - Low stretch kernmantel ropes EN 1891:1998 Personal fall protection equipment - Rope access systems - Rope adjustment devices EN 12841:2006 height - Part 1 Guided type fall arresters including a rigid anchor line EN 353-1:2002 height - Part 2 Guided type fall arresters including a flexible anchor line EN 353-2:2002 Self Retracting Devices For Personal Fall Arrest and Rescue Systems ANSI Z359.14:2012 Assessment Manager: RC3 Page 7 of 17

8 Foot Protection Footwear & gaiters for use in molten metal foundries BS 4676:2005 Footwear for fire-fighters EN 15090:2006 Electrically insulating footwear for working on low voltage installations EN 50321:1999 Personal Protective Equipment - Safety Footwear ISO 20345:2011 Personal protective equipment - Protective footwear ISO 20346:2004 Personal Protective equipment - Occupational Footwear ISO 20347:2012 Head Protection American National for Industrial Head Protection ANSI/ISEA Z89.1:2009 Occupational protective helmets AS/NZS 1801:1997 Helmets for horse riding and horse related activities AS/NZS 3838:2006 Fire-fighters' helmets AS/NZS 4067:2004 Specification for Protective Headgear Used in Horse Sports and Horseback Riding ASTM F1163:2004a specification for Helmets used in Recreational bicycling or roller skating ASTM F1447:2006 Assessment Manager: RC3 Page 8 of 17

9 Head Protection (cont d) Helmets used in Skateboarding and Trick Roller Skating ASTM F1492:2008 Specification for Helmets Used in Recreational Roller Skating ASTM F1751:1996 specification for bicycle helmets used by infants & toddlers ASTM F1898:2008 Specification for Helmets Used for Recreational Snow Sports ASTM F2040:2006 specification for headgear used in soccer ASTM F2493:2006 Specification for head protectors for cricketers BS 7928:1998 BS :2009 BS 7928:2013 Industrial Protective Headwear - Performance, selection, care & use CSA Z94.1:2005 Industrial safety helmets EN 397:2012 Helmets for fire fighting in buildings and other structures EN 443:2008 Industrial Bump Caps EN 812:2012 Helmets for Airborne Sports EN 966:1996 Helmets for alpine skiers and snowboarders EN 1077:2007 Assessment Manager: RC3 Page 9 of 17

10 Head Protection (cont d) Protective Helmets for Pedal Cyclists and for Users of Skateboards and Roller Skates EN 1078:2012 Impact Protection Helmets For Young Children (incorporating Amendment No 2) EN 1080:1997 Helmets for Equestrian Activities EN 1384:2012 VG1 RfU Helmets for canoeing and white-water sports EN 1385:1997 Mountaineering equipment - Helmets for mountaineers - Safety requirements and test methods EN 12492:2012 High performance industrial helmets EN 14052:2005 Electrically insulating helmets for use on low voltage installations EN 50365:2002 Head and face protection for use in ice hockey ISO 10256:2003 Helmets for equestrian use PAS 015:2011 Approval Specification : Riot Helmets for Police Use PAS 017:1995 Protective Headwear PSDB 21/04:2004 Assessment Manager: RC3 Page 10 of 17

11 Hearing Protection Hearing protectors - General requirements - Part 1: Ear-muffs EN 352-1:2002 Hearing protectors - General requirements - Part 2: Ear-plugs EN 352-2:2002 Hearing protectors - General requirements - Part 3: Ear-muffs attached to an industrial safety helmet EN 352-3:2002 Hearing protectors - Safety requirements and testing - Part 4: Level-dependent ear-muffs EN 352-4:2001 Hearing protectors - Safety requirements and testing - Part 5: Active noise reduction ear-muffs EN 352-5:2002 Hearing protectors - Safety requirements and testing - Part 6: Ear muffs with audio communications EN 352-6:2002 Hearing protectors - Safety requirements and testing - Part 7: Level-dependent ear-plugs EN 352-7:2002 Hearing protectors - Safety requirements and testing - Part 8: Entertainment audio ear-muffs EN 352-8:2002 Acoustics - Hearing protectors ISO 4869:2000 Respiratory Protection Respiratory Protective Devices AS/NZS 1716:2012 Respiratory protective devices for use against chemical, biological, radiological and nuclear (CBRN) agents, Part 1: Positive pressure self-contained breathing apparatus - Specification BS :2006 Assessment Manager: RC3 Page 11 of 17

12 Respiratory Protection (cont d) Respiratory protective devices for use against chemical, biological, radiological and nuclear (CBRN) agents, Part 2: Negative pressure, air purifying devices with full face mask - Specification BS :2006 Respiratory protective devices for use against chemical, biological, radiological and nuclear (CBRN) agents, Part 3.1: Self-contained open-circuit compressed air breathing apparatus incorporating a hood for escape - Specification BS :2009 Respiratory protective devices for use against chemical, biological, radiological and nuclear (CBRN) agents, Part 3.2: Air-purifying devices incorporating a hood for escape - Specification BS :2009 Respiratory protective devices for use against chemical, biological, radiological and nuclear (CBRN) agents - Part 4: Powered air purifying respirators - Specification BS :2008 Respiratory protective devices - Full face masks EN 136:1998 Respiratory protective devices - Self-contained open-circuit compressed air breathing apparatus with full face mask EN 137:2006 Respiratory protective devices - Fresh air hose breathing apparatus for use with full face mask, half mask or mouthpiece assembly EN 138:1994 Respiratory protective devices - Half masks and quarter masks EN 140:1998 Respiratory protective devices - Mouthpiece assemblies EN 142:2002 Assessment Manager: RC3 Page 12 of 17

13 Respiratory Protection (cont d) Respiratory protective devices - Particle filters EN 143:2000 Respiratory protective devices - Self-contained closed circuit breathing apparatus compressed oxygen or compressed oxygen nitrogen type EN 145:1997 Respiratory protective devices - Filtering half masks to protect against particles + A1:2009 EN 149:2001 Respiratory protective devices - powered fresh air hose breathing apparatus incorporating a hood EN 269:1994 Respiratory protective devices - Lung governed demand valve self contained open-circuit compressed air breathing apparatus with full face mask or mouthpiece assembly for escape - Requirements, testing, marking EN 402:2003 Respiratory protective devices for self-rescue - Filtering devices with hood for self-rescue from fire EN 403:2004 Filter self-rescuer from carbon monoxide with mouthpiece assembly EN 404:2005 Respiratory protective devices - Valved filtering half masks to protect against gases or gases and particles + A1:2009 EN 405:2001 Respiratory protective devices - Self-contained open-circuit compressed air breathing apparatus incorporating a hood for escape EN 1146:2005 Respiratory protective devices - Half masks without inhalation valves and with separable filters to protect against gases or gases and particles only + A1:2009 EN 1827:1999 Assessment Manager: RC3 Page 13 of 17

14 Respiratory Protection (cont d) Respiratory protective devices - Filters with breathing hoses (non mask mounted filters) - Particle filters, gas filters, and combined filters EN 12083:1998 Respiratory protective devices - Powered filtering devices incorporating a helmet or a hood Incorporating Amendments 1 and 2 EN 12941:1998 Respiratory protective devices - Powered assisted filtering devices incorporating full face masks, half masks or quarter masks + A2:1998 EN 12942:1998 Respiratory protective devices - Self-contained closed-circuit breathing apparatus for escape EN 13794:2002 Gas filter(s) and combined filter(s) EN 14387:2004 Respiratory protective devices - Self-contained open-circuit compressed air breathing apparatus with half mask designed to include a lung governed demand valve for escape purposes only EN 14529:2005 Respiratory protective devices - Continuous flow compressed airline breathing apparatus - Requirements, testing marking EN 14594:2005 Respiratory Protective Devices - Compressed air line breathing apparatus with demand Valve Part 1: Apparatus with full mask - Requirements, testing, marking EN :2005 Respiratory protective devices - Compressed air line breathing apparatus with demand Valve - Part 2: Apparatus with a half mask at positive pressure - requirements, testing, marking EN :2005 Assessment Manager: RC3 Page 14 of 17

15 Hand Protection Protective gloves against mechanical risks EN 388:2003 Protective gloves against thermal risks (heat and/or fire) EN 407:2004 Protective gloves. General requirements and test methods EN 420:2003+A1:2009 Protective gloves against ionizing radiation and radioactive contamination EN 421:2010 Protective gloves against cold EN 511:2006 Protective gloves for firefighters EN 659:2003+A1:2008+Corrigendum 2009 Protective gloves for welders EN 12477:2001+A1:2005 Live working - Gloves of insulating material EN 60903:2003+Corrigenda 1 and 2 Protective gloves against chemicals and microorganisms. Part 1:Terminology and performance requirements EN 374-3:2003 END Assessment Manager: RC3 Page 15 of 17

16 Accreditation for the purpose of Notified Body Activity taking into account EA2/17 and the relevant sections of ISO Directive / Regulation Conformity Assessment procedure/ Module/article Category of products or individual products Essential requirements: specification / Properties/s The Personal Protective Equipment Regulations EU2016/425 Module B EU-type examination Module C2 Conformity to type based on internal production control plus supervised product checks at random intervals Notified Body No: 0194 Equipment providing general body protection (clothing) against mechanical risks Equipment providing eye protection Module D Conformity to type based on quality assurance of the production process Equipment providing face protection Equipment providing foot and leg protection Equipment providing general body protection (clothing) The Personal Protective Equipment (EC Directive) Regulations EU2016/ , No 1144 Articles: 10 EC typeexamination 11A EC quality control system for the final product Equipment providing hand and arm protection Equipment providing head protection Equipment providing hearing protection 11B System for ensuring EC quality of production by means of monitoring Equipment providing respiratory protection Protective equipment against drowning and buoyancy aids Protective equipment against falls from a height Assessment Manager: RC3 Page 16 of 17

17 Accreditation for the purpose of Notified Body Activity taking into account EA2/17 and the requirements of ISO17021 and Directive / Regulation Conformity Assessment procedure/ Module/article Category of products or individual products Essential requirements: specification / Properties/s Marine Equipment Directive: 96/98/EC implemented by The Merchant Shipping (Marine Equipment) Regulations 1999 * Directive 96/98/EC: Article 10 and Annex B Directive 2014/90/EU: Chpt 4, Article 15 & Annex II Fire Protection. A.1/3.3 - A.1/3.8, A.1/3.41* s pursuant to * National legislation implementing Directive 96/98/EC until repealed by Article 40 of Directive 2014/90/EU Until 18/09/ /90/EU implemented by: The Merchant Shipping (Marine Equipment) Regulations 2016 ** Module B: EC Type Examination Module D: ion QA Module E: QA MED 1/3.3-1/3.8, 1/3.41** ** Implementing Acts (Article 35(2)) & Commission Regulation (Article 35(5)) via Article 40 concept of Directive 2014/90/EU From 18/09/2016 Note: The inspection of items marked thus * and ** are subject to legislative requirements including the appointment of persons or bodies to carry out conformity assessment. Reference should be made to the relevant Government Departments (MCA for Marine Equipment Directive) for information on this and listings of bodies recognised under UK legislation END Assessment Manager: RC3 Page 17 of 17